1700g . To find the molarity of a solution, we divide the number of moles of solute by the total volume of liters of solution.
How to solve ?We know that,
Molarity (mol/litre) = n ( moles of solute)/ Volume of solution
Now, 50 = n / 0.250
Then, n= 12.5 moles.
Now, as we know,
n = given mass/ molar mass
Then, molar mass of zinc chloride. ( ZnCl2) = (65 + 35.5×2) = 65 + 71 = 136 g/mol
12.5 = given mass / 136
Therefore, given mass = 1700 grams.
What does M1V1 M2V2 stand for?It's important to keep in mind that M1V1 = M2V2, where M1 is the starting concentration, V1 is the initial volume, M2 is the concentration following mixing or dilution, and V2 is the total final volume. V2 is the total of the volumes blended while working with diluted aqueous solutions.
What is molarity of 1M?The number of moles per liter, denoted by the unit symbol mol/L or mol/dm3 in SI units, is the most often used unit denoting molarity in chemistry. One mol/L of a solution's concentration is referred to as one molar, or 1 M.
Learn more about molality here:
https://brainly.com/question/14591804
#SPJ1
There are three basic rules of electric charge. Opposite charges
the law of conservation of charge. What does it state?
like charges.
and
Ionic compound are able to conduct electricity.
What is ionic compound?an ionic compound is a chemical compound composed of ions held the together by electrostatic of forces termed the ionic bonding. The compound is to neutral overall,the but consists of positively charged ions called cations and negatively charged ions called anions.
Ionic compounds conduct electricity when molten (liquid) or in aqueous solution (dissolved in the water), because their ions are free to move from place is to to place. Ionic compounds is cannot conduct electricity of when solid, as their ions are held in fixed positions and the cannot move.
To know more about ionic compound click -
https://brainly.com/question/2687188
#SPJ1
Which energy transformations happen when the students close the switch on the circuit and the blades of the fan begin to spin?
Answer: When we switch on a fan, the fan converts a significant portion of the electrical energy into kinetic energy of the fan blades. Some part of electric energy is converted into heat. energy transformation will be:-
Electrical energy → Kinetic energy
Explanation:
Which of these has lowest viscosity as a liquid? a. CH3CH2CH3b. CH3CH2NH2c. CH3OCH3d. CH3Cle. CH3CH2OH
Among the following (a) CH₃CH₂CH₃ has the lowest viscosity as a liquid.
A liquid's ability to flow is due to the fact that its molecules can move around and around each other. The degree to which a substance resists flow is referred to as its viscosity. High viscosities are exhibited by liquids such as glycerin and honey, which a very lower flow rate. Those with low viscosities, such as ether or gasoline, have excellent flow characteristics.
The magnitude of the intermolecular forces and, more specifically, the structures of the molecules that make up a liquid are what determine its viscosity. In general, liquids with molecules that are polar or that are capable of forming hydrogen bonds have a greater viscosity than comparable nonpolar substances.
(A) The intermolecular force of attraction in CH₃CH₂CH₃ is provided by hydrogen bonds. Because the hydrogen bonding is so much stronger than the dispersive force, it results in a significantly higher viscosity.
You can also learn about viscosity from the following question:
https://brainly.com/question/13385698
#SPJ4
what is indicator? give three examples of indicator.
Indicators are weak acids or bases that exhibit a color change as hydrogen ion concentration in a solution varies or as a solution's pH changes.
In the water, the indicators gently separate to produce ions.
The three examples of indicators are
Litmus: It is one of the naturally occurring chemical indicators. It is naturally obtained from lichens. It is usually found in form of paper strips. Paler strips are of 2 colors red and blue. Acids change the blue paler to red color whereas the base changes red paper to blue color. Some solutions don't give any color with litmus paper because they are neutral Turmeric: it is a type of natural indicator. It is used in our daily life while preparing food. Turmeric gives a yellow color when the acidic medium is the ent brownish-red red color when the basic medium is present. This effect of turmeric is due to a yellow pigment present in it known as curcumin.Vanilla extract: It is a type of olfactory indicator. It works by changing the smell when reacted. It gives a pungent smell when reacted with acid. But when the base is added to this extract the reaction is odorless. This is due to certain chemicals present in it.The dilution equation, rearranged to solve for 1 is 1=221 where 1 and 1 are the initial concentration and volume, respectively, and 2 and 2 represent the final concentration and volume, respectively. A student needs to prepare 50.0 mL of 1.20 M aqueous H2O2 solution from a 4.60 M H2O2 stock solution. Identify the values of 2, 2, and 1 in this situation.
M₁ = 1.20 M
M₂ = 4.60 M
V₂ = 50.0 ml
Volume of 50.0 ml H₂O₂ stock solution required 191.7 ml.
What is dilution equation?Using a stock solution and the following formula, one may create a given quantity of a diluted solution: M₁V₁ = M₂V₂, where V₁ is the volume of stock solution required to create the new solution. M₁ = Stock solution concentration. V₂ denotes the final volume of the new solution.
Given that,
A student needs to prepare 50.0 ml of 1.20 M aqueous H₂O₂ solution from a 4.60 M H₂O₂ stock solution.
As we know,
M₁V₁ = M₂V₂
M₁ = 1.20 M
M₂ = 4.60 M
V₂ = 50.0 ml
Now, V₁ = M₂V₂ / M₁
V₁ = (4.60 M × 50.0 ml ) / 1.20 M
V₁ = 191.7 ml
So, volume of 50.0 ml H₂O₂ stock solution required 191.7 ml.
To know more about concentration refer to:
https://brainly.com/question/26255204
#SPJ1
In a rural region of India, scientists collected data of different pesticide residue levels from closely located farming plots. Some of these plots used integrated pest management biopesticides, while others used chemical pesticides to control pests. The data below show levels of four pesticide residues found in tomato and cucumber crops in the two treatment plots.
By defending crops from pests and diseases and increasing yield, pesticides play a significant part in ensuring global food security.
Because some pesticides residues gather in fat, trim any excess fat from the meat, skin, and bones of poultry and fish. CHOOSING A VARIATION OF FOODS Consume a variety of foods from different sources. You will receive a better variety of nutrients as a result, and your risk of pesticide exposure will be lower. Pesticide residue testing is a procedure that determines the amounts of pesticide residue in food items by a thorough chemical and microbiological analysis, giving food producers and manufacturers assurance in the components of their products.
Learn more about pesticides here-
https://brainly.com/question/12284986
#SPJ4
please draw a complete arrow pushing mechanism for a generic electrophilic aromatic substitution. you can use e for the electrophile that adds.
During resonance, the molecule's electrons remain stationary. A probability cloud of electrons is what we can make out. Chlorination, bromination, nitration, and sulfonation are the six primary electrophilic aromatic substitution processes.
What is aromatic substitution?
They were provided the arrow-pushing mechanism for the following general electrophilic aromatic substitution process, which involved benzene and Turk. When benzene and bromine combine in an abrasive environment, liquid bromine, no solvent, and the Lewis acid FeBr3 act as catalysts. An atom that is connected to an aromatic ring is replaced with an electrophile in electrophilic aromatic substitution processes. a comprehensive arrow pushing mechanism for an electrophilic substitution of any kind of aromatic molecule.
To learn more about electrophilic substitution from given link
brainly.com/question/21773561
#SPJ4
What is the entropy when a system goes from 4 microstates to 5 microstates? Group of answer choices 3.08 x 10-24 -3.08 x 10-24 0.223 0
A count of all potential microscopic states (microstates) that could exist for a system in thermodynamic equilibrium and be consistent with its macroscopic thermodynamic parameters, which make up the system's macrostate.
What is entropy S used to measure?A system's thermal energy per unit of temperature that cannot be used for productive work is measured by entropy. The amount of entropy is a measurement of the molecular disorder of a system since work is produced by ordered molecular motion.
In terms of microstates, what does entropy mean?Entropy was first described by Ludwig Boltzmann as the count of alternative microscopic states (microstates) of a system in thermodynamic equilibrium that are consistent with its macroscopic thermodynamic parameters, which make up the system's macrostate.
To know more about entropy visit :-
https://brainly.com/question/15025401
#SPJ1
Predict if the following will fully, partially, or not dissociate, when dissolved in a solution.Potassium fluoride, KF(s), a strong electrolyte
Potassium fluoride, KF(s), a strong electrolyte, fully dissociates when dissolved in a solution.
Describe electrolyte.When dissolved in water, chemicals known as electrolytes acquire a natural negative or positive electrical charge. They support a variety of bodily functions, including maintaining the harmony of fluids within and outside of your cells and regulating chemical processes.
Does sugar include electrolytes?Because glucose can aid in hydration, many people believe it must be an electrolyte. Sugar, however, isn't an electrolyte. Instead, it's a carbohydrate which fuels your body by turning glycogen reserves in your muscles into energy.
To know more about electrolyte visit :
https://brainly.com/question/28699046
#SPJ4
Express the number of moles of AL, S, and O atoms numerically, separated by commas
The number of moles of Al, S, and O atoms in 5.00 moles of Al₂(SO₄)₃ is equal to 10 mol, 15 mol, and 60 mol respectively.
What is a mole?A mole can be described as a scientific unit to calculate the quantity of a given substance and generally the huge number of quantities of molecules, atoms, ions, or other particular particles.
The number of elementary units in one mole was found to be equal to 6.023 × 10 ²³ which is known as Avogadro’s number.
Given the number of moles of Al₂(SO₄)₃ = 5 mol
One mole of Al₂(SO₄)₃ contain Al = 2 moles
Then 5 mol of Al₂(SO₄)₃ contain Al = 2 × 5 = 10 mol
One mole of Al₂(SO₄)₃ contain S = 3 moles
Then 5 mol of Al₂(SO₄)₃ contain S = 3 × 5 = 15 mol
One mole of Al₂(SO₄)₃ contain Oxygen (O) = 12 moles
Then 5 mol of Al₂(SO₄)₃ contain Al = 12 × 5 = 60 mol
Learn more about the mole, here:
brainly.com/question/26416088
#SPJ1
Your question is incomplete, most probably the complete question was:
Calculate the number of moles of aluminum, sulfur, and oxygen atoms in 5.00 moles of aluminum sulfate, Al₂(SO₄)₃. Express the number of moles of Al, S, and O atoms numerically, separated by commas.
The density of an object is 5g/cm^3 and the volume of the object is 10 cm^3. What is the mass of the object
The mass of the object of density 5g/cm³ and volume 10 cm³ is 50kg.
What does physics mean when it refers to density?Defining density How tightly a material is packed together is determined by its density. Its definition is "mass per unit volume". D or, the symbol for density
Density Formula: = m/V,
where is the density, m is the object's mass, and V is its volume.
The units used change depending on the calculation's use of mass and volume units. Density would be expressed in kg/cm³ if the mass is expressed in kg and the volume in cm³.
Density = mass / volume
Mass = density × volume
Mass = 5×10
Mass = 50 kg.
To know more about density, visit:
https://brainly.com/question/6107689
#SPJ1
How to do this question?
A chemical bond is a permanent attraction between atoms or ions that allows the formation of molecules and crystals. Bonding can result from electrostatic forces between oppositely charged ions, as in ionic bonding, or through sharing of electrons, as in covalent bonding.
Both NH₃ and NH₄⁺ ions have SP³ hybridization. However, NH₃ has one lone pair and three bond pairs. Due to the strong repulsive forces between the lone electron pair and the bonding electron pair, the geometric structure of NH₃ is Distorted and pyramidal despite sp³ hybridization. The NH₄⁺ ion has four bonding pairs. The repulsion between bonding pairs is small compared to the repulsion between bonding pairs and lone pairs. So the geometry is a tetrahedron.In HCN, carbon is attached to nitrogen with a triple covalent bond consisting of one sigma bond and two pi bonds. A sigma bond is formed by overlapping hybridized orbitals, and the remaining two unhybridized orbitals overlap to form two pi bonds.1-Propanol is a member of the alcohol family, meaning it has a hydroxyl (-OH) group at the end of the chain. The oxygen atom of the hydroxyl group forms a hydrogen bond with water, making it soluble in water.The conduction band is the band of electron orbitals to which electrons can jump when excited from the valence band. Electrons have enough energy to move freely in matter in these orbitals, this movement of electrons produces an electric current.To know more about chemical bonds, visit:
https://brainly.com/question/15444131
#SPJ1
A woman with severe preeclampsia is being treated with an iv infusion of magnesium sulfate. this treatment is considered successful if _____.
In order to keep preeclampsia patients from having seizures, magnesium sulfate treatment is employed. Additionally, it can assist extend pregnancy by up to two days.
When given to a patient with preeclampsia, what is the main effect of magnesium sulfate?Additionally, it is used as a preventative measure for all patients with severe preeclampsia. It is believed that magnesium sulfate works by causing cerebral vasodilation, which lessens the ischemia brought on by cerebral vasospasm during an eclamptic event.
How is eclampsia treated with magnesium sulphate?Magnesium sulfate can reduce peripheral vascular resistance or relieve vasoconstriction by acting as a vasodilator, with effects in the cerebrovasculature or peripheral vasculature.
To know more about preeclampsia visit:-
https://brainly.com/question/29355938
#SPJ4
A 49.8−g sample of ethylene glycol, a car radiator coolant, loses 842 J of heat. What was the initial temperature of the ethylene glycol if the final temperature is 32.5°C? (c of ethylene glycol = 2.42 J/g·K)
Initial temperature is 740.417K of the ethylene glycol.
According to the first law of thermodynamics dU= dq+ dw, and system loose temperature thus dw= -842J and for adiabatic process dq=0 so dU=dw=-842J.
Also dU= nCvdT, and n= [tex]\frac{49.8}{62}[/tex]=0.8mol.
Cv=2.42J/gK
and dT=T2-T1=305.5-T1
Thus -842=0.8*2.42*(305.5-T1)
T1=740.417K
What is first law of thermodynamics?
Energy can only be transferred or transformed from one form to another; it cannot be created or destroyed.
Read more about first law of thermodynamics:
https://brainly.com/question/1613201\
#SPJ1
In a 49.8−g sample of ethylene glycol, a car radiator coolant, loses 842 J of heat, the initial temperature of the ethylene glycol is 740.417K.
The first rule of thermodynamics states that dU = dq+ dw, and since the system loses temperature as a result, dw = -842J. Similarly, for an adiabatic process, dq = 0, therefore dU = dw = -842J.
Also, n = 0.8mol, and dU = nCvdT.
dT = T2-T1
=305.5-T1 and
Cv = 2.42J/gK
In light of this,
-842 = 0.8*2.42*(305.5-T1)
T1 = 740.417 K
What is the thermodynamics first law?
Energy cannot be produced or discarded; it can only be transformed from one kind to another.
What are entropy and enthalpy?
Entropy is the amount of intrinsic disorder within a substance, whereas enthalpy is the quantity of internal energy. Enthalpy is nonzero for water because it is zero for elemental compounds like hydrogen gas and oxygen gas (regardless of phase).
To know more about Enthalpy, visit:
https://brainly.com/question/13996238
#SPJ1
In this experiment, you will prepare a standard solution for a calibration curve for the formation of FeSCN2 complex by reaction different volumes of 0.002M Fe(NO,), and 0.002 M NaSCN. You will use 0.1M HNO, for all dilutions. Using the table, Calculate the equilibrium concentrations of FeSCN2+ Vol of Fe Vol of SCN 0.1 M HNO3 (mL) Equilibrium (mL) 10.00 10.00 concentration Fe[SCN] (mL) 0.00 1.00 2.00 3.00 4.00 5.00 10.00 9.00 8.00 7.00 10.00 10.00 10.00 6.00 5.00 10.00 Experiment 12 Le Chatelier's Principle: Chemical Equilibrium and Determination of Equilibrium Constant: Pre-Lab
It is possible to calculate the equilibrium constant and shift in equilibrium position of a chemical process under stress.
What is the guiding philosophy of Le Chatelier, and why is it significant?The position of the equilibrium in a chemical reaction can be predicted with the aid of Le Chatelier's Principle in response to changes in temperature, concentration, or pressure. This is crucial, especially for industrial applications where it's crucial to predict and maximize yields.
Where can the Le Chatelier principle be used?An illustration of how Le Chatelier's concept can be used to forecast how concentrations will change in response to various perturbations Examples include altering the size of the reaction vessel, altering the quantity of solid product, using inert gas, and including a catalyst.
To know more about Le Chatelier's Principle visit:-
https://brainly.com/question/2001993
#SPJ4
For the chemical reaction H₂ (g) + F₂ (g) → 2 HF (g) ∆H° = -79.2 kJ/mol. What is the molar enthalpy (in kJ/mol) for the reaction 3 H₂ (g) + 3 F₂ (g) → 6 HF (g)
Answer: -237.6
Explanation:
Multiplying both sides of the equation by 3 means you multiply the molar enthalpy by 3.
Compare and contrast substrate level phosphorylation and oxidative phosphorylationSubstrate level phosphorylation is a direct type of phosphorylation in which a phosphate group is directly transferred to an ADP molecule. Oxidative phosphorylation is an indirect method of phosphorylation in which the energy liberated in the electron transport chain is used in generating ATP.
The Krebs cycle and glycolysis both involve substrate level phosphorylation. Inside the electron transport chain, oxidative phosphorylation takes place.
What is the basic principle of oxidative phosphorylation?Electrons from NADH and FADH2 mix with O2 during oxidative phosphorylation, and the energy generated from these oxidation/reduction events is utilized to power the production of ATP from ADP. Known also as electron transport-linked phosphorylation, oxidative phosphorylation
In how many oxidative phosphorylations does ATP get produced?The Kreb's cycle produces 24-28 ATP molecules from one sugar molecule that has already been converted into pyruvate. Two theoretical approaches are utilized to investigate oxidative phosphorylation: metabolic lead to the current and irregular thermodynamics.
To know more about Oxidative phosphorylation visit:
https://brainly.com/question/29104695
#SPJ4
Devise a route to convert propene to 1-bromo-2-propanol. Specify, in order, the reagents you would use. The reaction may require more than one step. If there is more than one feasible route, show only one. Specify reagents using letters from the table, first reagent on the left. Example: ab a NBS f K2Cr207, H2SO4, k OsO4/H202 H2O, heat g Cl2, heat or light h Cl2 b H2, Pd I 1. BH3 2. H202, NaOH c H2O, H2SO4 m SOCl2, pyridine d PCC i HCI n HBr Br2 in H20 j NaOH o Br2, e The reagents are in order of use):
Propan-1-ol can also be produced by hydroboration oxidation reaction.This reaction is known as the hydroboration reaction and obeys the anti-Markovnikov rule.
B2H6 reacts with propene along with hydrogen peroxide, converting it to 1-propanol. This reaction is known as the hydroboration reaction and obeys the anti-Markovnikov rule. Propene adds to diborane to form adducts. The adduct gives 1-propanol upon oxidation.
The reagents used for the dehydration of propan-2-ol to propene are concentrated phosphoric acid or concentrated sulfuric acid. Propanone can be converted to propane-2 by reducing the ketone. A ketone is reduced to a secondary alcohol. Ketones can be reduced by hydrogenation with a Grignard reagent. To convert propene to propan-1-ol, the method of reacting propene with peroxide is used.
Learn more about The reagents here:- https://brainly.com/question/6959208
#SPJ4
which statement is true of all protiens? a)they are created by mutations in DNA b)they carry oxygen in human blood c)Their structure is related to their function d)Their main function is to cause mutations
C) Their structure is related to their function
DNA (deoxyribonucleic acid) is the genetic material of humans and almost all other organisms. mostly every cell in the human body has the same DNA. Most DNA is found in the nucleus of cells, but small amounts of DNA can also be found in the mitochondria, also called mtDNA. Mitochondria are structures within cells that convert food energy into a form the cell can use
Mutation is one of the functions of DNA. A mutation is a change in the DNA sequence of an organism. Mutation can occur because of many circumstances. Our DNA has gone through mutations that created humans out of monkeys. the evolution of mankind is because of mutation in DNA.
To learn more about mutation click here: https://brainly.com/question/28817858
If the replacement of a Blank in the DNA sequence results in Blank with a codon that codes for Blank amino acid, then the order of the amino acids is affected.
If the replacement of a base in the DNA sequence results in mRNA with a codon that codes for a different amino acid, then the order of the amino acids is affected.
What is DNA?DNA is an abbreviation for deoxyribonucleic acid and it can be defined as a group of molecules that are found within cells and they are saddled with the responsibility of storing genetic information in all living organisms.
What is translation?In Genetics, translation can be defined as a cellular process through which a genetic code from a sequence of messenger ribonucleic acid (mRNA) molecule is decoded or translated to a specific sequence of amino acids, during the synthesis of protein.
Additionally, a codon simply refers to a sequence of three (3) consecutive nucleotides that act as a genetic unit of life and it is used as a template for the amino acid synthesis which is generally required for protein expression in living organisms.
Read more on DNA here: brainly.com/question/16099437
#SPJ1
What quantity of moles of Care formed upon complete reaction of 2
according to the generic chemical reaction:
A+2 B ➡️ C
If 2 moles of B react with 1 mole of A, the quantity of moles of C that are formed upon complete reaction is 2 moles.
How mole is conserved in chemical reaction?
Because there are always the same amounts of reactants and products present in a chemical reaction, the mole is conserved. The law of conservation of mass states that the total masses of the reactants and products in a chemical reaction are equal, governs this idea.
The idea of molecular weight can be used to translate the law of conservation of mass into moles. The mass of one mole of a substance, measured in grammes, is its molecular weight. For instance, water (H2O) has a molecular weight of 18.015 g/mol, which indicates that one mole of water weighs 18.015 grammes.
The law of conservation of mass can be stated as follows when describing a chemical reaction in which two reactants, A and B, react to form two products, C and D: In the equation n(A) + n(B) = n(C) + n(D), n(A) denotes the quantity of reactant A, n(B) the quantity of reactant B, n(C) the quantity of product C, and n(D) the quantity of product D. According to this equation, there are exactly as many moles of reactants as there are of products. Because the total number of reactant and product moles stays constant throughout the reaction, this indicates that the mole is conserved in chemical reactions.
It's crucial to remember that regardless of the type of reactants or products involved, the law of conservation of mass holds true for all chemical reactions. This principle, which is a fundamental law of chemistry, is crucial for comprehending how matter behaves.
According to the problem:
In the chemical reaction A+2B=C, the quantity of moles of C that are formed upon complete reaction depends on the number of moles of A and B that are present.
According to the given information, 2 moles of B react with 1 mole of A to form C. This means that the ratio of B to A is 2:1, and the ratio of C to A is 1:1.
To determine the number of moles of C that are formed upon complete reaction, use the mole ratios to calculate the number of moles of C that are produced for every mole of A that is consumed. In this case, 1 mole of A reacts with 2 moles of B to produce 1 mole of C.
Therefore, if 2 moles of B react with 1 mole of A, the quantity of moles of C that are formed upon complete reaction is 2 moles. This is because 2 moles of B are equivalent to 1 mole of C, and the mole ratio between B and C is 2:1.
To know more about mole, visit:
https://brainly.com/question/15442173
#SPJ1
38.5 mL of HCl of unknown concentration is neutralized by 16.8 mL of 0.50M NaOH. Calculate the concentration of the HCl.
A neutralizing reaction takes place when the acid and base are let to interact. The concentration of HCl is 218.12 M.
What do you mean by Neutralized ?Determine how much 0.100 M HCI solution is required to neutralize 25.0 mL of 0.350 M NaOH. (Response: 87.5 mL) In order to neutralize 124 mL of 0.250 M NaOH solution, determine the volume of 0.100 M HzSO4 solution required. An acid and base process known as neutralization produces only salt and water. The OH- from the base totally neutralizes the H+ from the acid in this reaction. Therefore, we can define a neutralization reaction as a reaction that creates water by removing the H+ and OH- from the reactant. Here is an example to help you.
HCl + NaOH = NaCl + H₂OOH⁻ + H⁺
mol of solution = molarity × Liter solution
mol HCL = 16.8 ml × 0.50 M
= 8.4 mol HCl
Concentration of HCl = 8.4/0.0385
= 218.12 M
From the foregoing, it is obvious that the reaction converted the OH- and H+ from the base into water.
To know more about Neutralized please click here ; https://brainly.com/question/15255706
#SPJ1
How much heat is needed to increase the temperature of a 540.6 g sample of iron from 20°C to 84°C? The specific heat capacity of iron is 0.450 J/g · C
Answer:
The temperature of the iron sample from 20°C to 84°C is 20999.6 J.
Explanation:
To determine the amount of heat needed to increase the temperature of a substance, you can use the following formula:
Q = m * c * ΔT
Where Q is the amount of heat, m is the mass of the substance, c is the specific heat capacity of the substance, and ΔT is the change in temperature.
In your case, the mass of the iron sample is 540.6 g, the specific heat capacity of iron is 0.450 J/g · C, and the change in temperature is 84°C - 20°C = 64°C. Plugging these values into the formula, we get:
Q = 540.6 g * 0.450 J/g · C * 64°C = 20999.6 J
Therefore, the amount of heat needed to increase the temperature of the iron sample from 20°C to 84°C is 20999.6 J.
Aldol condensation and subsequent dehydration of the aldol adduct will provide the desired aldehyde intermediate.
Aldol reaction followed by dehydration to produce enone are the two main phases that make up the entire process.
The mechanism for the acid-catalyzed hydration of an alkene involves two stages. Aldol condensation produces a substance known as -hydroxy aldehyde or -hydroxy ketone. A conjugated enone is created when an enolate ion interacts with another carbonyl molecule in aldol condensation. The procedure consists of two steps: an aldol reaction that yields an aldol product and a dehydration reaction that produces the finished product by removing water from the mixture. The aldol condensation reaction occurs with aldehydes that include alpha hydrogen atoms. Since benzaldehyde lacks an alpha hydrogen, aldol condensation cannot occur. There is at least one alpha hydrogen in each and every alternative.
Learn more about reaction here-
https://brainly.com/question/28984750
#SPJ4
A thermometer that shows temperature as the height of a column of liquid is an analog device because its measurements a. change in steps. b. change continuously. c. are in degrees. d. do not rely on electric current.
In the following reaction, 8.24 mol of P4 mix with 24.2 mol of O₂.
P4 (s) + 5 O2 (g) → 2 P₂O5 (s)
a. Find the limiting reagent. Explain.
b. How many moles of P2O5 (s) will be produced?
C. How many grams of P₂O5 (s) will be produced?
The limiting reagent is O₂ because there is only 24.2 mol of O₂ available for the reaction, and 8.24 mol of P4 is needed to react with all of the O₂.
What is reaction?Reaction is a response to a stimulus or event. It is an action or behavior that is often automatic and instinctive. Reactions can be emotional, biological, chemical, or physical. Examples of reactions include fear, laughing, crying, or sweating. Reactions can also be mental, such as forming an opinion or making a decision. Depending on the context, a reaction can be positive or negative. A reaction can be short lived, or it can cause a longer lasting impact. Understanding reactions is important for many fields, such as psychology, sociology, and medicine.
a. The limiting reagent is O₂ because there is only 24.2 mol of O₂ available for the reaction, and 8.24 mol of P4 is needed to react with all of the O₂.
b. 12.1 mol of P2O5 (s) will be produced.
c. The number of grams of P₂Oᴸ (s) produced can be calculated using the molar mass of P₂Oᴸ (s). 12.1 mol of P2O5 (s) has a mass of 283.9 g.
To learn more about reaction
https://brainly.com/question/24795637
#SPJ1
Balance the equation below to show the relationship between gehlenite (Ca Alysio,) and its component metal and semimetal oxides. 1st attempt See Periodic Table Seeh Balance the equation by adding the appropriate coefficients I CAO ) A10, sio, ChAlso,
To make sure that all of the atoms in the following equation are balanced, we must multiply CaO by a coefficient of 2.
2CaO+Al2O3+SiO2---->Ca2Al2Si O7
What are a few illustrations of oxides?atomic oxygen: One example of a neutral oxide is water. There is no acid or base in water. Carbon monoxide, nitric oxide, and nitrous oxide are more instances of neutral oxides. Carbon dioxide, sulfur dioxide, phosphorus pentoxide, sulfur trioxide, chlorine oxides, etc. are some examples of acidic oxides.
Gold is it an oxide?Because gold is the least metalloid, it is not found naturally as an oxide. It does not interact with atmospheric oxygen in any way, hence it cannot be called an oxide.
To know more about oxides visit:
https://brainly.com/question/9496279
#SPJ4
identify the three components of the SN2 reaction in the correct order nucleophile, electrophile and leaving group
a. Blue, Green, Red
B. Green, Red, Blue
C. Red, Green, Blue
D. Green, blue, red
E. Blue, red, green
Red, Green, and Blue of both the SN2 reaction are the nucleophile, electrophile, and leaving group in the proper order, according to the provided statement.
What are some instances of nucleophiles?A nucleophile is a reagent that transports an electron pair. Curved-arrow notation shows the transfer of such a pair of electrons from of the nucleophilic attack to the electrophile. Negatively charged species like the NC - ion of cyanide serve as an illustration of a nucleophile.
What makes it a nucleophile?Christopher Kelk Ingold replaced the words anionoid and cationoid, first suggested by A. J. Lapworth in 1925, with nucleophile and electrophile in 1933. The Greek word o, philos, which means friend, is taken from the term nucleus to get the phrase nucleophile.
To know more about nucleophile visit:
https://brainly.com/question/29563504
#SPJ4
Classify each substance as an atomic element, molecular element, molecular compound, or ionic compound.
The substances given in the task above are correctly classified as either atomic element, molecular element, molecular compound, or ionic compound as follows:
Atomic element: AgMolecular element: F₂Molecular compound: CO, PbI4.Ionic compound: noneWhat is a compound?A compound can simply be defined as a chemical substance which is formed as a result of the chemical attraction between two or more elements. In order words, a compound is made or formed from two or more elements. A compound is chemically combined together
From the task given above, Carbon monoxide, CO and Lead iodide, PbI4 are typical examples of a compound.
That being said, an atom is the smallest particle of an element which can take part in a chemical reaction. Fluorine, F₂ is an atomic element.
So therefore, we can now confirm and deduce from the explanation given above that a compound contains at least two or more different elements.
Read more on compounds:
https://brainly.com/question/26487468
#SPJ1
The chemical equation for a reaction between K2Cr2O7 and HCl is shown.
K2Cr2O7 + 14HCl → 2CrCl3 + 2KCl + 3Cl2 + 7H2O
Which of the following identifies the reactant that acts as an oxidizing agent in the reaction and explains the answer?
K2Cr2O7, because the oxidation number of K changes from +6 to +3.
K2Cr2O7, because the oxidation number of Cr changes from +6 to +3.
HCl, because the oxidation number of H changes from −1 to 0.
HCl, because the oxidation number of Cl changes from −1 to 0.
Answer:
The correct answer is:
K2Cr2O7, because the oxidation number of Cr changes from +6 to +3.
Explanation:
In this reaction, K2Cr2O7 is the reactant that acts as an oxidizing agent. An oxidizing agent is a substance that causes another substance to be oxidized (to lose electrons). In this case, the oxidation number of Cr in K2Cr2O7 changes from +6 to +3 as it is oxidized by HCl. This indicates that K2Cr2O7 is acting as the oxidizing agent in the reaction.
HCl is not acting as an oxidizing agent in this reaction. The oxidation number of H in HCl does not change, and the oxidation number of Cl changes from -1 to 0, which indicates that it is being reduced (gaining electrons).
It's important to note that the concept of oxidation numbers is used to keep track of the electrons that are transferred during a chemical reaction. The oxidation number of an element in a compound is a measure of the degree to which it has been oxidized or reduced. In general, an element that has a higher oxidation number before a reaction will have a lower oxidation number after the reaction, indicating that it has been reduced, while an element with a lower oxidation number before the reaction will have a higher oxidation number after the reaction, indicating that it has been oxidized.