Explanation:
Biological in the ocean is affected by the water cycle via the Mixed Layer Depth and Run off from land. Salinity and temperature determine the density of ocean water, and density influences the circulation. E-P determines surface salinity of the ocean, which helps determine the stability of the water column.
Which group of atomic models is listed in historical order from the earliest to the most recent?
The historical order of atomic models from the earliest to the most recent is as: Hard sphere model, electron shell model, and wave mechanical model. Therefore, option (A) is correct.
What is the atomic model?The atomic model can be described as the model used to describe the structure and composition of the atom. The atom as a primary component of matter has been under extensive study to understand the universe.
In the classical model of an atom, the atom is made of smaller particles with an electrical charge called electrons, protons, and neutrons. To understand the atomic models, it is important to understand how these particles make up the atom.
There are five principal atomic models that have been proposed over time, which are Dalton’s atomic model, Thomson’s atomic model, Rutherford’s atomic model, Bohr’s atomic model, and the quantum atomic model.
Learn more about the atomic model, here:
https://brainly.com/question/1596638
#SPJ5
Your question was incomple, most probably the complete question was,
Which group of atomic models is listed in historical order from the earliest to the most recent?
A) Hard sphere model, electron shell model, and wave mechanical model
B) Hard sphere model, wave mechanical model, and electron shell model
C) Electron shell model, Hard sphere model, and wave mechanical model
D) Electron shell model, wave mechanical model, and Hard sphere model
Which phrase is most similar in meaning to “scientific theory”?
A. a best guess explanation
B. a rigorously tested explanation
C. an opinion of what should happen
D. a mathematical relationship
Answer:
c
Explanation:
Answer:
A. a best guess explanation
Explanation:
A scientific theory explains why something behaves the way it does and is usually backed up by different sources. They are not speculations and can be proven. Those which are speculations and are not proven are called hypothesis. A scientific theory can also be replaced, if it is found that it does not produce valid results, or if a better theory is proposed which is made of one or more old theories.
is muriatic acid a compound or not?
equatinal by elimination melha
8n-3y = 18 and5x+6y=27
Answer:
x = 3 and y= 2
Explanation:
Given equations:
8x - 3y = 18 - ---- (I)
5x + 6y = 27 -------(II)
Solve this problem by elimination;
In the elimination method, we simply find a common term that can make one of the variables in the two equation the same. Then we either add or subtract to remove the variable.
Mulitply equation (i) by 5 to give equation III
Mulitply equation (II) by 8 to give equation IV
5(8x - 3y) = 5(18) ------- III
8(5x + 6y) = 8(27) ------- IV
40x - 15y = 90------- III
40x + 48y = 216 ------- IV
Subtract equation III and IV;
-15y - 48y = 90 - 216
- 63y = -126
y = 2
Solve for x;
40x - 15y = 90;
40x - 15(2) = 90
40x - 30 = 90
40x = 90 + 30
40x = 120
x = 3
What is Mercury's proximity to the sun
PLEASE HELPP
Answer:
46.943 million km
Explanation:
From an average distance of 36 million miles (58 million kilometers), Mercury is 0.4 astronomical units away from the Sun.
From an average distance of 36 million miles (58 million kilometres), Mercury is 0.4 astronomical units away from the Sun.
(I hope this helped ^^)
what causes the tides
Answer:
Gravity causes tides
Explanation:
(Please try to answer my most recent question!!!!!)
Displacement is called vector quantity. Why?
Answer:
Distance is a scalar quantity that refers to "how much ground an object has covered" during its motion. Displacement is a vector quantity that refers to "how far out of place an object is"; it is the object's overall change in position.
Explanation:
An ideal sample weighing 1.28g at 127C (temp) and 1 atm has a volume of 0.250L. Determine the molar mass of the gas.
Answer:
Molar mass of gas = 160 g/mol
Explanation:
Given data:
Mass of sample gas = 1.28 g
Temperature of sample gas = 127°C (127+273 = 400K)
Pressure of sample gas = 1 atm
Volume of sample gas = 0.250 L
Molar mass of gas = ?
Solution:
Formula:
PV = nRT
R = general gas constant = 0.0821 atm.L/ mol.K
Now we will put the values in formula.
1 atm × 0.250 L = n × 0.0821 atm.L/ mol.K ×400K
0.250 L.atm = n ×32.84atm.L/ mol
n = 0.250 L.atm/32.84atm.L/ mol
n = 0.008 mol
Molar mass of gas:
Number of moles = Mass/molar mass
0.008 mol = 1.28 g / molar mass
Molar mass = 1.28 g / 0.008 mol
Molar mass = 160 g/mol
List the steps of how a virus is able to infect your cells
Answer:
Key Points
Viral replication involves six steps: attachment, penetration, uncoating, replication, assembly, and release.
During attachment and penetration, the virus attaches itself to a host cell and injects its genetic material into it.
What is the shape of a CO2 molecule?
Which types of matter are made of atoms
a. Mixtures
b. Elements
C. Compounds
D. All of the above
Answer:
D all above yes I think it's all above
Answer: D
Explanation: All of the above.
Plz mark brainliest:)
Which descriptions apply to prokaryotic cells? Check all that apply.
are usually single-celled
contain a nucleus
do not contain membrane-bound organelles
have DNA located in cytoplasm
Answer:
-are usually single celled
-do not contain membrane-bound organelles
-have DNA located in cytoplasm
Explanation:
currently taking the test
Which two substances are among the four major types of organic compounds made by living things?
A. Lipids
B. Carbon dioxide
C. Water
D. Nucleic acids
Answer:
I think carbon.
Explanation:
............
name two diffirent kinds of animals and identify at least one characteristic that makes them diffirent from each other
Answer:
Bears and Whales
Explanation:
Bears keep themselves warm via a thick fur coat
Whales keep themselves warm with a thick layer of blubber
Is a backpack a good resource
for a rescue team?
The density of air at STP is 1.285 g/L. Which of the following cannot be used to fill a balloon that will float in air at STP?
NO can't be used to fill a balloon
Further explanationConditions at T 0 ° C and P 1 atm are stated by STP (Standard Temperature and Pressure). At STP, Vm is 22.4 liters/mol.
Answer options that need to be added :
a. Ne
b. NO
c. NH₃
d. CH₄
e. HF
will float in air ⇒ element or compound to fill the balloon, its density must be less than < 1.285 g/L
We can use the ideal gas formula ta find density :
[tex]\tt \rho=\dfrac{P.MW}{RT}[/tex]
Because at STP, then the constant value is
[tex]\tt \rho=\dfrac{1~atm\times MW}{0.08205\times 273.15~K}\\\\\rho=0.0446\times MW[/tex]
So that the density is determined from the MW(molecular weight) of each element or compound
a. NeAr = 20.1797 g/mol
[tex]\tt \rho=0.0446\times 20.1797=0.9~g/L[/tex]
b. NOMW=30.006 g/mol
[tex]\tt \rho=0.0446\times 30.006=\boxed{\bold{1.338~g/L}}[/tex]
c. NH₃MW=17.0306 g/mol
[tex]\tt \rho=0.0446\times 17.0306=0.760~g/L[/tex]
d. CH₄MW=16.04 g/mol
[tex]\tt \rho=0.0446\times 16.04=0.715~g/L[/tex]
e. HFMW=20.01 g/mol
[tex]\tt \rho=0.0446\times 20.01=0.892~g/L[/tex]
A student compared some chemical and physical properties of three pure substances. Her
data are recorded in the chart above. What is a logical conclusion the student can draw
about hare substances?
Pure substances have the same chemical and physical properties.
Pure substances have the same chemical properties, but different physical properties.
O Pure substances have the different chemical properties, but the same physical properties.
O Pure substances have different chemical and physical properties.
Answer:
letter b not c
Explanation:
next time please take a picture lucky i already took this
Why are forecasters able to make more accurate predictions about the weather when using electronic tools?
O A wide variety of devices can be used to collect weather data from many places
O Weather data come exclusively from different weather stations in one region.
Data fed into a supercomputer accounts only for select processes that occur on Earth.
Scientists must input several pieces of weather information into a computer system.
Answer:
option 1
Explanation:
Forecasters, able to make more accurate predictions about the weather when using electronic tools because a wide variety of devices can be used to collect weather data from many places. Therefore, option A is correct.
What is forecaster ?Forecaster behavior is examined by forecasters to see how social, cultural, ethical, and environmental trends will likely impact it. They can determine what goods and services people will be wanting to purchase through this approach.
A person who informs you about the anticipated state of a situation: an analyst of the economy. a forecaster of weather. The term "meteorologist" has now become widely used to refer to someone who forecasts the weather and investigates objects that fall from the sky.
Fitzroy developed charts to allow forecasts to be made, which he called "forecasting the weather," and therefore created the word "weather forecast," after a storm in October 1859 that resulted in the loss of the Royal Charter.
Thus, option A is correct.
To learn more about forecaster, follow the link;
https://brainly.com/question/882902
#SPJ6
What is the mass of 4.49 x 10º carbon dioxide, CO2, molecules?
How much space does 2 x 10^22 atoms of copper take up?
Answer:
2.35mL
Explanation:
The amount of space a substance holds is its volume.
Density = mass (g) /volume (L)
Where;
mole = mass/molar mass
Since 1 mol of Cu contains 6.022 × 10^22 atoms.
There are 2 x 10^22/6.022 × 10^22 moles in 2 x 10^22 atoms of copper
2 x 10^22/6.022 × 10^22
2/6.022 × 10^(22-22)
0.332 × 10^0
0.332mol
Mole = mass/molar mass
0.332 = mass/63.5
mass = 63.5 × 0.332
mass = 21.08g
Density = mass/volume
Density of copper (Cu) is 8.96 g/cm³
8.96 = 21.08/v
V = 21.08/8.96
V = 2.35mL or cm³
What happens when you add salt to very cold ice?
Which pair of symbols represents nuclei with the same number of neutrons?
A. 56 Co and 580
B. 57Co and 58Ni
c. 57Fe and 58 Ni
D. 57Mn and 57Fe
Answer:
B
Explanation:
Mass number = number of neutrons + number of protons
Atomic number is the number of protons in the nucleus.
58Ni : 58 is the number of neutrons + number of protons
atomic number of Ni is 28. Thus, 58 -28 = 30 neutrons
57Co ; 57 is the number of neutrons + number of protons
number of Co is 27. Thus, 57 – 27 = 30 neutrons
While designing his recording studio, Brian was trying to determine what type of surface he should use for his studio walls. He wanted to be able to produce clear, crisp, sound. So he needed a surface that wouldn't cause his music to echo. What type of surface should Brian use for his studio walls?
Answer: Acoustic Foam.
Explanation:
Acoustic Foam: This is a kind of material, which is commonly known as it called a Studio Foam, it has a kind of wedge or pyramid shape that plays a big role in absorbing sound. Brian would have to use acoustic foam by placing them round the walls and ceiling as this would stop any echoing sound and in return give a crisp and clear sound when music is been played it the studio.
how did music change during medieval, renaissance and baroque eras
Answer:
usage of trills and vibrato
Explanation:
earlier music used trills while later styles would use vibrato.
Which term describes weathering?
breaks down rock
causes heating and cooling
makes pebbles and rocks larger
carries away fragments
Answer:
Breaks down rocks.
Explanation:
Weathering is the breaking down of rocks often with water. For example a sea shell will get batered with water and over time form sand.
Please help!
We are doing a lab and I have trouble doing the data analysis. Using my data collection, Can you guys help me using the MC delta T equation?
4.94 x c . (Tm-23.6)=C.(23-6-21.9)+123.13 x c. (23.6-21.9)
Further explanationThe law of conservation of energy can be applied to heat changes, ie the heat received/absorbed is the same as the heat released
Q in = Q out
Heat can be calculated using the formula:
Q = mc∆T
A calorimeter is a device used to measure the specific heat of material
A metal is put into a calorimeter that contains water and there will be heat transfer:
[tex]\tt \displaystyle m_mc_m (T_m-T)=m_wc_w(T-Tw)[/tex]
m = metal
w = water
T = the final temperature of the mixture
mass of metal =(Nickel) = 4.94 g
mass of calorimeter = 12.5 g
mass of water = 123.13 g (135.63 - 12.5)
The equation
Q released (metal) = Q absorbed(calorimeter+water)
Qmetal = 4.94 x c . (Tm-23.60)Q calorimeter = C.(23-6-21.9) --> C = heat capacity of calorimeterQ water = 123.13 x c. (23.6-21.9)The equation :
4.94 x c . (Tm-23.6)=C.(23-6-21.9)+123.13 x c. (23.6-21.9)
I need help with the 2nd part first gets brainlist
Answer:
7. 4H₂O
Elements: Hydrogen, Oxygen
Number of molecules: 4
Number of elements: 8 H, 4 O
Number of Atoms: 12
Explanation:
The elements are determined by the their symbol i.e. H = hydrogen.
The number of molecules is determined by the coefficient ( the number in front of everything, in this case 4).
The number of elements is determined by the coefficient and the subscripts. Multiply the coefficient by the subscript after each element. When there is no subscript, it is equal to 1. 4H₂ = 4x2 = 8; 4O = 4x1 = 4.
The number of atoms is all the individual elements added together. 8+4 = 12.
Which answer choice correctly describes what will happen to an element with four valence electrons if it engages in a chemical reaction?
a. It will lose electrons.
b. It will neither gain nor lose electrons.
c. It will gain electrons.
d. It may gain or lose electrons.
is Mo2S6 ionic or covalent
Answer: Ionic
Explanation:
Answer:
ionic
Explanation:
The modern synthesis combined the concepts of _______ and evolution.
Answer:
genetics
hope this helps :)
Explanation: