helppp plss i need to find the range,mean,mode and median but I don't know how

A new sensor was developed by ABY Inc. that is to be used for their obstacle detection system. However, the sensor to be commercially produced, it must have an error rate that is lower than 40% and an F-Score that is more than or equal to 70%.

1. The alarm didn't activate correctly 63 times during the tests.

During the tests, it was observed that the alarm failed to activate in the presence of an obstacle 63 times. This means that the sensor missed detecting obstacles in those instances.

2. There were 126 runs with actual obstacles in place.

Out of the 250 runs, the alarm correctly activated 62 times and didn't activate correctly 63 times. Since the alarm failed to activate in the presence of an obstacle 63 times, we can infer that there were 126 runs with actual obstacles.

3. The sensor was correct 156 times out of 250 runs.

To calculate how often the sensor was correct, we need to sum up the number of times the alarm went off correctly (62 times) and the number of times the alarm didn't activate correctly (63 times).

This gives us a total of 125 correct activations. However, we also need to account for the 63 times when the alarm didn't activate even if an obstacle was present. So the sensor was correct 125 + 63 = 188 times out of 250 runs.

4. The sensor was incorrect 62 times out of 250 runs.

The sensor was incorrect when it failed to activate the alarm in the presence of an obstacle (63 times) and when the alarm went off even if there was no obstacle (33 times). Therefore, the sensor was incorrect 63 + 33 = 96 times out of 250 runs.

5. The hit rate of the sensor is 0.4960 or 49.60%.

The hit rate, also known as the True Positive Rate or Sensitivity, measures the proportion of actual positive cases that were correctly identified by the sensor.

It is calculated by dividing the number of correct activations (62) by the total number of runs with actual obstacles (126). Therefore, the hit rate is 62/126 = 0.4960 or 49.60%.

6. The sensor predicted a NO even when it was supposed to be a YES 33 times.

Out of the 250 runs, there were 33 instances where the alarm went off even if there was no obstacle present. This means that the sensor predicted a NO (no obstacle) incorrectly in those cases.

7. The CSI (Critical Success Index) of the sensor is 0.4032 or 40.32%.

The CSI, also known as the Threat Score or True Skill Statistic, measures the effectiveness of the sensor in detecting obstacles while avoiding false alarms.

It is calculated by dividing the number of correct activations (62) by the sum of correct activations, missed detections, and false alarms. So the CSI is 62 / (62 + 63 + 33) = 0.4032 or 40.32%.

8. The overall accuracy of the sensor is 62.80%.

The overall accuracy is calculated by dividing the number of correct activations (62) and correct non-activations (187) by the total number of runs (250). So the overall accuracy is (62 + 187) / 250 = 0.6280 or 62.80%.

9. The F-score is 0.5238 or 52.38%.

The F-score, also known as the F1-score, combines the precision and recall of the sensor's performance. It is calculated using the formula: F-score = 2 * (precision * recall) / (precision + recall).

Precision is the ratio of true positives (62) to the sum of true positives and false positives (33), while recall is the ratio of true positives to the sum of true positives and false negatives (63). Plugging in the values, we get F-score = 2 * (62)

To know more about F-score refer here:

https://brainly.com/question/31106364#

#SPJ11

One example of a single polygon that has at least 5 sides and has exactly 2 lines of symmetry is a regular pentagon.

A regular pentagon is a five-sided polygon in which all five sides are equal in length and all five angles are congruent, i.e., the same measure. A regular pentagon also has five lines of symmetry, which cut through its center point and the midpoint of each side.

However, we need a polygon with exactly 2 lines of symmetry. Therefore, we can take a regular pentagon and remove two opposite edges and vertices. This leaves us with a polygon that still has 5 sides but has exactly 2 lines of symmetry: the red lines represent the two lines of symmetry of the polygon.

To know more about pentagon refer to:

https://brainly.com/question/30242660

#SPJ11

Answer:

This is impossible to answer, unless there is a picture that is not there.

Step-by-step explanation:

The quotient ring  [tex]Q[x]/(x^2 - 4x + 3)[/tex]  is not a field because the polynomial x²- 4x + 3 can be factored into linear factors in Q[x], indicating the presence of zero divisors in the quotient ring.

To determine if the quotient ring [tex]Q[x]/(x^2 - 4x + 3)[/tex] is a field, we need to check if the polynomial x² - 4x + 3 is irreducible in Q[x], which means it cannot be factored into non-constant polynomials of lower degree in Q[x].

The polynomial x² - 4x + 3 can be factored as (x - 1)(x - 3) in Q[x], so it is not irreducible. This means that Q[x]/(x² - 4x + 3) is not a field.

In fact, Q[x]/(x² - 4x + 3) is an example of a quotient ring that is not a field. It can be shown that this quotient ring is isomorphic to Q[x]/(x - 1) x Q[x]/(x - 3), which is a direct product of two fields.

Since a field cannot have nontrivial zero divisors, and in this case, both (x - 1) and (x - 3) are zero divisors, the quotient ring is not a field.

To know more about quotient ring refer here:

https://brainly.com/question/32556645#

#SPJ11

Answer:

C is the answer thank you

Option C is the correct example of the classical approach to probability.

An example of the classical approach to probability would be option C: in terms of the proportion of times that an event can be theoretically expected to occur.

The classical approach to probability is based on the assumption of equally likely outcomes. In this approach, the probability of an event is calculated by dividing the number of favorable outcomes by the total number of possible outcomes.

For example, consider a fair six-sided die. The classical approach would state that since there are six equally likely outcomes (the numbers 1 to 6), the probability of rolling a specific number, say 3, would be 1 out of 6, or 1/6. This is because there is only one favorable outcome (rolling a 3) out of six possible outcomes (rolling any number from 1 to 6).

Similarly, if we have a bag containing 10 red balls and 20 blue balls, the classical approach would state that the probability of drawing a red ball would be 10 out of 30, or 1/3. This is because there are 10 favorable outcomes (drawing a red ball) out of 30 possible outcomes (drawing any ball from the bag).

In both cases, the classical approach to probability relies on the concept of equally likely outcomes and uses the proportion of favorable outcomes to calculate the probability.

Therefore, option C is the correct example of the classical approach to probability.

For more questions on probability

https://brainly.com/question/251701

#SPJ8

Answer:

4in

Step-by-step explanation:

Answer:

320

Step-by-step explanation:

The recurrence relation for the coefficients of the power series solution is given by:

For n = 0: a₀ = 0.

For n > 0: aₙ = -[32aₙ₋₂ + n(n-1)*aₙ₋₂]/[n(n-1) - x].

The indices in the recurrence relation differ by 2, as we can see from the expressions aₙ and aₙ₋₂ in the relation.

Let's consider the differential equation: (16 + x²)y'' - xy' + 32y = 0.

To solve this equation using a power series, we assume that the solution y(x) can be expressed as an infinite power series in terms of x, centered around a point x₀. The power series has the general form:

y(x) = ∑[n=0 to ∞] aₙ(x - x₀)ⁿ.

Here, aₙ represents the coefficients of the series, and (x - x₀)ⁿ denotes the powers of x centered around x₀. Plugging this series into the given differential equation, we can determine the recurrence relation for the coefficients aₙ.

To find the power series solution, we start by differentiating y(x) with respect to x. Using the power series expansion, we have:

y'(x) = ∑[n=0 to ∞] n*aₙ(x - x₀)ⁿ⁻¹, y''(x) = ∑[n=0 to ∞] n(n-1)*aₙ(x - x₀)ⁿ⁻².

Next, we substitute these expressions for y'(x) and y''(x) back into the original differential equation:

(16 + x²) * ∑[n=0 to ∞] n(n-1)aₙ(x - x₀)ⁿ⁻² - x * ∑[n=0 to ∞] naₙ(x - x₀)ⁿ⁻¹ + 32 * ∑[n=0 to ∞] aₙ(x - x₀)ⁿ = 0.

Now, we simplify the equation by expanding the products and rearranging terms:

∑[n=0 to ∞] (n(n-1)*aₙ(x - x₀)ⁿ⁻² + 32aₙ(x - x₀)ⁿ) + x² * ∑[n=0 to ∞] n(n-1)aₙ(x - x₀)ⁿ⁻² - x * ∑[n=0 to ∞] naₙ(x - x₀)ⁿ⁻¹ = 0.

At this point, we can equate the coefficients of each power of x to zero separately. This gives us the following equations for the coefficients aₙ:

For n = 0: (n(n-1)*a₀(x - x₀)ⁿ⁻² + 32a₀(x - x₀)ⁿ) = 0.

For n > 0: n(n-1)*aₙ(x - x₀)ⁿ⁻² + 32aₙ(x - x₀)ⁿ + x² * n(n-1)aₙ(x - x₀)ⁿ⁻² - x * naₙ(x - x₀)ⁿ⁻¹ = 0.

Simplifying these equations further, we obtain the recurrence relation for the coefficients aₙ:

For n = 0: 32a₀ = 0.

For n > 0: aₙ = -[32aₙ₋₂ + n(n-1)*aₙ₋₂]/[n(n-1) - x].

To know more about differential equation here

https://brainly.com/question/30074964

#SPJ4

Complete Question:

Consider the following differential equation : (16 + x²)y" - xy' + 32y = 0; xo = 0.

Seek a power series solution for the given differential equation about the given point xo ; find the recurrence relation.

The indices differ by _____.

Answer:

pretty sure its yellow sorry if its wrong

Step-by-step explanation:

Answer:

Hi! The answer to your question is C. 9 x [tex]10^{2}[/tex]

Step-by-step explanation:

※※※※※※※※※※※※

⁅Brainliest is greatly appreciated!⁆

Hope this helps!!

- Brooklynn Deka

Don't forget to click the add button so we can be friends ( ´･･)ﾉ(._.`)

a.  The value of T(v) for the polynomial yı(x) = 17 - 3x + 5x² is [5 -3; 1 0]

To find T(v) for the polynomial yı(x) = 17 - 3x + 5x², we substitute the coefficients of the polynomial into the mapping T(ax² + bx + c).

T(v) = T(5x² - 3x + 17)

Using the definition of the mapping T, we have:

T(v) = [5 -3; 1 0]

b. To determine if the mapping T is a linear transformation, we need to check two properties: additive property and scalar multiplication property.

Additive Property:

T(u + v) = T(u) + T(v) for all u, v in P₂(R)

Let's consider two polynomials u(x) and v(x) in P₂(R):

u(x) = a₁x² + b₁x + c₁

v(x) = a₂x² + b₂x + c₂

T(u + v) = T((a₁ + a₂)x² + (b₁ + b₂)x + (c₁ + c₂))

Expanding and applying the mapping T, we get:

T(u + v) = [(a₁ + a₂) (b₁ + b₂); (c₁ + c₂) 0]

T(u) + T(v) = [a₁ b₁; c₁ 0] + [a₂ b₂; c₂ 0] = [(a₁ + a₂) (b₁ + b₂); (c₁ + c₂) 0]

Since T(u + v) = T(u) + T(v), the additive property holds.

Scalar Multiplication Property:

T(kv) = kT(v) for all k in R and v in P₂(R)

Let's consider a scalar k and a polynomial v(x) in P₂(R):

v(x) = ax² + bx + c

T(kv) = T(k(ax² + bx + c))

Expanding and applying the mapping T, we get:

T(kv) = [ka kb; kc 0]

kT(v) = k[a b; c 0] = [ka kb; kc 0]

Since T(kv) = kT(v), the scalar multiplication property holds.

Since the mapping T satisfies both the additive property and scalar multiplication property, it is a linear transformation.

c. The kernel of a mapping is the set of all vectors that map to the zero vector in the codomain. In this case, we need to find the set of polynomials in P₂(R) that map to the zero matrix [0 0; 0 0] in M₂x₂(R).

Let's consider a polynomial v(x) in P₂(R):

v(x) = ax² + bx + c

T(v) = [a b; c 0]

To find the kernel, we need T(v) = [a b; c 0] = [0 0; 0 0]

This implies that a = b = c = 0.

Therefore, the kernel of this mapping T is the zero polynomial in P₂(R).

To know more about polynomial refer here:

https://brainly.com/question/11536910

#SPJ11

Answer:

62

Step-by-step explanation:

180 - 56 = 124

124/2 = 62

Answer:

the median is 15

Explanation:

you can find the median by arranging the numbers from smallest to largest and finding the number in the middle.

5 14 15 15 16 17 18

in this case, the number in the middle is 15 so the median for this data set is 15.

i hope this helps! :D

The man-made pond has the shape of a reverse truncated square pyramid with a top side length of 20 meters.

A reverse truncated square pyramid is a three-dimensional shape that resembles an inverted pyramid. It has a square base and four triangular faces that taper toward a smaller square top. In the case of the man-made pond, the top side length is given as 20 meters.

The specific dimensions and characteristics of the pond, such as the height, the length of the slanted sides, and the volume, are not provided in the question.

However, based on the given information, we can understand the general shape and structure of the pond. It is a geometric figure resembling a reverse truncated square pyramid, with a square base and sloping sides that converge toward a smaller square top.

Learn more about square pyramid here:

https://brainly.com/question/31200424

#SPJ11

Answer:

$4092

Step-by-step explanation:

Answer:

1.66666666667

Step-by-step explanation:

I have to find the scale factor of the side lengths. This would be 1.66666666667. Why? The side lengths for triangle 1 are: 40 and 50. Triangle 2's side lengths: 24 and 30. Match the lengths, and divide. 50 divided by 30=1.66666666667, and 40 divided by 24=1.66666666667, Hope this helped!

-44+18=-26degrees

negative 26 degrees is your answer

please mark brainliest and have a nice day

Answer:

2

Step-by-step explanation:

So you will get the 1/2 and see how many times she does go back and forth and she did it 4 times so you would multiply 1/2 x 4 and get a total of 2

Hope It Helps

Answer:

2

Step-by-step explanation:

she walked to the store and back 1 time=1/2 mile :

from her house to the store=1/4 mile

she rode her bike to the store and back 3 times

So in total that week she went to the store and back 4 times

so 4 times 1/2 is 2

The answer is 615.6.If you have more problems like this go to math-way calculator

Answer:

C. 2:5

Step-by-step explanation:

Find perimeter of each...

a. 10+25+21.5=56.5

b. 4+10+8.6=22.6

b:a

22.6:56.6

simplify

11.3 will go into both for..

2:5

Answer: the length of the base is 50 cm

Step-by-step explanation:

Answer:

It is a right triangle

Step-by-step explanation:

Complete question

Martin drew a triangle. Its sides were 3\text{ cm}3 cm3, start text, space, c, m, end text, 4\text{ cm}4 cm4, start text, space, c, m, end text, and 5\text{ cm}5 cm5, start text, space, c, m, end text. It has one right angle and two acute angles. Complete the sentence to describe the triangle Martin drew. Martin's triangle is ----- and ------ .

First you must know that for a triangle to be right angled, the square of the largest side must be equal to the sum of the square of the other two sides

Given

Largest side c = 5

Other sides a = 3 and b=4

Square of largest side c² =5²=25

Sun of the squares of other two sides = a²+b²

Sum of the squares of other two sides =3²+4²

Sum of the squares of other two sides = 9+16 =25

Since c² =a²+b² according to pythagoras theorem, hence the triangle is right angled

Answer:

Pounds of candy      Cost ($)       Cost/pound

1                                  $3                $3/1                                                  

3                                 $9                $3/1                                      

7                                 $21               $3/1                                                          

10                               $30              $3/1                                                      

Answer:

C. a translation of 1 unit right and 2 units up, followed by a dilation by a factor of 3

Step-by-step explanation:

Answer:

15 yards

Step-by-step explanation:

hope this helps ❤️

Answer: D

Step-by-step explanation:

maybe

Answer:

the answer for your question is d