Help please all of the numbers b4 the equal sign are wrong

This question is incomplete, the complete question is;

Determine the greatest pressure drop allowed over the 10-m-long pipe caused by viscous friction, so the flow remains laminar.

The 125-mm-diameter smooth pipe is transporting SAE 10W-30 oil with ρ=920 kg/m3 and µ=0.2 N.s/m2 .

Answer: the greatest pressure drop allowed is 14247 Pascals

Explanation:

LAMINAR FLOW INF PIPE

greatest pressure drop

(P1 - P2) = pressure drop

(P1 - P2) = 32uvl / D²

so (P1 - P2) ∝ V

greatest pressure drop is only at very high velocity

now Re (Reynold Number = svd / u

Re ∝ V

so velocity is high when Re is high

Re = 2000 ( Highest for LAMINAR)

Re = 2000 = svd / u

now in the question we were given that

s = 920 kg/m³, u = 0.2 NS/m², d = 125mm = 0.125m, l = 10m

so we substitute;

2000 = (920 × v × 0.125) / 0.2

v = 3.48 m/s

now pressure drop = (P1 - P2) = 32UVL / d²

we substitute

(P1 - P2)  = (32(0.2) (3.48)(10)) / (0.125)²

(P1 - P2) = 14247 Pascals

therefore the greatest pressure drop allowed is 14247 Pascals

Answer:

axial stress in bar B = 25Mpa.

Deformation of bar A = 0.4mm.

Explanation:

PS: Kindly check the attached picture for the diagram showing the two bars that is to say the bar A and the bar B.

So, we are given the following data or information or parameters which we are going to use in solving this particular question or problem. Here they are;

The cross-sectional areas of Bars A and B =  400 mm2, the  modulus of elasticity of  bar A and bar B = 200 GPa, applied force = 10kN.

STEP ONE: The first step is to determine or calculate the axial stress in bar B. Therefore,

Axial stress in bar B = 10 × 10³ ÷ 400 × 10⁻⁶ = 25 Mpa.

STEP TWO: The second step here is to determine or calculate the deformation of bar A. Therefore,

The deformation of bar A = 20 × 10³ ×1.5 ÷ 400 × 10⁻⁶ × 200 × 10³ = 0.375 mm.

Answer:

Hello your question is incomplete attached below is the missing part and answer

options :

Effect A

Effect B

Effect C

Effect D

Effect AB

Effect AC

Effect AD

Effect BC

Effect BD

Effect CD

Answer :

A  = significant

 B  = significant

C  = Non-significant

D  = Non-significant

AB  = Non-significant

AC  = significant

AD  = Non-significant

BC  = Non-significant

 BD  = Non-significant

 CD = Non-significant

Explanation:

The dependent variable here is Time

Effect of A  = significant

Effect of B  = significant

Effect of C  = Non-significant

Effect of D  = Non-significant

Effect of AB  = Non-significant

Effect of AC  = significant

Effect of AD  = Non-significant

Effect of BC  = Non-significant

Effect of BD  = Non-significant

Effect of CD = Non-significant

Answer:

it's B I think

Explanation:

hopefully that helps you

Answer: C

Explanation: A mortar mixer is the equipment that would help Seth in the process of building a wall of bricks. A mortar mixer is used to mix the mortar, which is the binding material used to hold the bricks together. It ensures the mortar is properly mixed to the right consistency for laying the bricks.

Answer:

Anne is a mechanical engineer.

Explanation:

There are many different types of engineers (mechanical, industrial, electrical, chemical and civil) around the world. When a job involves designing machines, it falls under mechanical engineering. Such job requires a person to be as creative as possible, so he/she can come up with an innovative design that will be reasonable when used.

Designing machines includes spacecrafts. Therefore, Anne is a mechanical engineer working for NASA.

Answer:

The answer is "828.75"

Explanation:

Please find the correct question:

For W21x93 BEAM,

[tex]Z_x = 221.00 in^3 \\\\\to \frac{b_t}{2t_f} =4.53\\\\\to \frac{h}{t_w}=32.3[/tex]

For A992 STREL,

[tex]F_y= 50\ ks[/tex]

Check for complete section:

[tex]\to \frac{b_t}{2t_f} =4.53 < \frac{65}{\sqrt{f_y = 9.19}}\\\\\to \frac{h}{t_w} =32.3 < \frac{640}{\sqrt{f_y = 90.5}}[/tex]

Design the strength of beam =[tex]\phi_b Z_x F_y\\\\[/tex]

                                                [tex]=0.9 \times 221 \times 50\\\\=9945 \ in \ \ kips\\\\=\frac{9945}{12}\\\\= 828.75 \ft \ kips \\[/tex]

Answer:

hello your question is incomplete attached below is the missing diagram to the question and the detailed solution

Answer : principal stresses : 0.82 MPa, -33.492 MPa

              shear stress = 17.157 MPa

              ∅ = 9.09 ≈ 10°

Explanation:

The principal stress ( б1 ) = 0.82 MPa

                                 ( б2 ) = -33.492 MPa

The shear stress = 17.157 MPa

∅ = 9.09 ≈ 10°

attached below is the detailed solution and the Mohr's circle

Answer:

1) titration

2) titrand

3) equivalence point

4) titrant

5) Burette

6) Indicator

Explanation:

The process of adding a known volume a standard solution to another solution to react with it in order to determine the concentration of the unknown solution is known as titration.

The solution to which another solution of known concentration is added is called the titrand while the solution of known concentration is called the titrant.

A burette is a glassware used to slowly add a known volume of the titrant to the titrand. An indicator shows the point when the reaction is complete by a color change. This is the point when the required amount of one solution has been added to the second solution. It is also called the equivalence point.

I. The process of slowly adding a solution to react with another solution and determine the concentration of one of the solutions based on the reaction between them: Titration.

II. A solution of an unknown concentration that has another solution slowly added to it: Analyte.

III. When the required amount of one solution has been added to the second solution to complete the reaction: Endpoint.

IV. A solution of known concentration that is slowly added to a solution of unknown concentration: Titrant.

V. A glassware that allows a solution to be precisely and slowly added to another solution: Burette.

VI. A reagent added to the analyte solution that changes color when the reaction is complete: Indicator.

Titration is also referred to as titrimetry or volumetric analysis and it can be defined as a chemical process in which a solution of known concentration is slowly added to a solution of unknown concentration, in order to determine the concentration or quantity of the analyte (solution of an unknown concentration)

For example, titration can be used to determine the concentration of a basic solution by titrating it with an acid solution of known concentration that is required to neutralize the basic solution.

In Chemistry, the following terms and apparatus are used for the titration of solutions:

Read more: https://brainly.com/question/23307058

Answer:

The wind turbine has little impact on the environment compared to conventional power plants. Meanwhile the Wind turbine can affect the wildlife meaning birds are being harmed by the blades.

Explanation: Hope that helps:)

Answer:

attached below is the solution

Explanation:

hello  attached below is the sequence of push and pop operations on stack memory

For The collatz method below

public void collatz(int n) {

if (n == 1) return;

else if (n % 2 == 0)

collatz(n / 2);

else collatz(3*n + 1); }

Answer:

some part of your question is incomplete

attached below is the complete question

Answer :

F(0) = -5  < 0

F(1) = e - 1 > 0

since the functions : f(0) and f(1) have opposite signs then there is a 'c' whereby F(c) = 0 ( intermediate value theorem fulfilled )

Hence there is a root in the given equation : [tex]e^x = 6 - 5x[/tex]

Explanation:

using Intermediate value Theorem

If F(x) is continuous and f(a) and f(b) have opposite signs then there will be a'c'E (a,b)  whereby F(c) = 0

given equation : [tex]e^x = 6 - 5x[/tex]   on (0,1)

and F(x) = [tex]e^x - 6 + 5x = 0[/tex]

This shows that the F(x) is continuous on (0,1)

F(0) = [tex]e^0 - 6 + 5(0)[/tex]  = -5 which is < 0

F(1) = [tex]e^1 -6 + 5(1)[/tex] = e -1 > 0  and e = 2.7182

since the functions : f(0) and f(1) have opposite signs then there is a 'c' whereby F(c) = 0 ( intermediate value theorem fulfilled )

Hence there is a root in the given equation : [tex]e^x = 6 - 5x[/tex]

Answer: aerofoil type blades

Explanation: they are more difficult to make but offer better performance and higher rotational speeds making them ideal for electrical energy generation.

Answer:

changes of Mass affect the planet because... I'm sorry If this didn't help.

Answer:

YES

Explanation:

NO

;-;

Answer: Technology is the application of scientific knowledge for practical purposes, especially in industry.

Mechanical.

Electronic.

Industrial and manufacturing.

Medical.

Communications.

Explanation:

Answer:

Technology is something like a phone or like a tablet or like an electrace car

Explanation:

In the feature i belive that there is going to be more and higher andanved  technology or like people say flying cars a robots.  But i feel more advanced stuff like phones and computers or labtops or like tablets.

Explanation:

10000=5000(1.12^x)

2=1.12^x

(log_1.12)(2)=x

x= about 6.1163

10000=5000(1.2^x)

2=1.2^x

(log_1.2)(2)=x

x= about 3.8019

compare them by saying like 20% will be 6.12/3.8 times faster

The final specific internal energy : 190 kJ/kg

The laws of thermodynamics 1 state that: energy can be changed but cannot be destroyed or created  

The equation is:  

[tex]\tt E_{in}-E_{out}=\Delta E~system\\\\\Delta E=\Delta U+\Delta KE+\Delta PE\\\\\Delta U=m(U_2-U_1)\\\\Q-W=\Delta U+\Delta KE+\Delta PE[/tex]  

Energy owned by the system is expressed as internal energy (U)  

This internal energy can change if it absorbs heat Q (U> 0), or releases heat (U <0). Or the internal energy can change if the system does work or accepts work (W)  

The sign rules for heat and work are set as follows:  

• The system receives heat, Q +  

• The system releases heat, Q -  

• The system does work, W -  

• the system accepts work, W +  

A closed system of mass 20 kg⇒m=20 kg

Heat transfer of 1000 kJ from the system to the surroundings⇒Q=-1000 kJ

The work done on the system is 200 kJ⇒W=+200 kJ

The initial specific internal energy of the system is 250 kJ /kg⇒U₁ = 250 kj/kg

Neglect changes in kinetic and potential energy⇒ΔKE+ΔPE=0, so

Q-W = ΔU

Input in equation

[tex]\tt -1000-200=20(U_2-250)\\\\-1200=20U_2-5000\\\\3800=20U_2\\\\U_2=190~kJ/kg[/tex]

Answer:

Both Technicians A and B  are correct

Explanation:

If the fluid pressure will decrease quickly in a car when the ignition says that one or more has been switched off. One or two could be leaking or the source could be a faulty check mechanism in the catalytic converter.

Answer:

  A accountant

  D teacher

  B cook

  C beautician

Explanation:

C is on the right of the accountant, so D (opposite C) is the teacher. The accountant is to the right of the teacher, so cannot be B, and must be A. Then B (opposite A) is the cook, and C (left of B) is the beautician.

__

Clockwise from A:

  A accountant

  D teacher

  B cook

  C beautician

Answer: the cancer risk for an adult male drinking the water for 10 years is 2.88 × 10⁻⁶

Explanation:

firstly, we find the time t required to travel for the contaminant to the well;

Given that, contamination flowing rate = 0.5 ft/day

Distance of well from the site = 1 mile =  5280 ft

so t = 5280 / 0.5 = 10560 days

k is given as 1.94 x 10⁻⁴ 1/day

next we find the Pollutant concentration Ct in the well

Ct = C₀ × e^-( 1.94 x 10⁻⁴ × 10560)

Ct = 0.3 x e^-(kt)  

Ct= 0.0386 mg/L

next we determine the chronic daily intake, CDI

CDI =  (C x CR x EF x ED) / (BW x AT)

where C is average concentration of the contaminant(0.0368mg/L), CR is contact rate (2L/day), EF is exposure frequency (350days/Year), ED is exposure duration (10 years), BW is average body weight (70kg).

now we substitute  

CDI = (0.0368 x 2 x 350 x 10) / ((70x 365) x 70)

= 257.7 / 1788500

= 0.000144 mg/Kg.day

CDI = 1.44 x 10⁻⁴ mg/kg.day  

Finally we calculate the cancer risk, R

Slope factor SF is given as 0.02 Kg.day/mg

Risk, R = I x SF

= 1.44 x 10⁻⁴ mg/kg.day  x 0.02Kg.day/mg    

R = 2.88 × 10⁻⁶

therefore the cancer risk for an adult male drinking the water for 10 years is 2.88 × 10⁻⁶

Answer:

1) ∀x [ Tiger(x) → Fast(x) ]

2) эx [ Tiger (x) ∧ Fierce (x) ∧ Dangerous(x) ]

3) ∀x [ Prime(x) → Odd(x) ]

4) ∀x [ prime (x) ∧  ~Two(x) → Odd (x) ]

5) ∀x [ Fruits(x) → ( yellow(x) ∨ Red(x) ]

6) ∀xэy [ I(x) → greater (y, x) ]

Explanation:

Translating the statements into first Order Logic and their negations

1)   All tigers are fast. Domain: animals.

∀x [ Tiger(x) → Fast(x) ]

2)  Some tigers are fierce and dangerous. Domain: animals

эx [ Tiger (x) ∧ Fierce (x) ∧ Dangerous(x) ]

3) Every prime number is odd. Domain: positive integers

∀x [ Prime(x) → Odd(x) ]

4)  All prime numbers except two are odd. Domain: positive integers

∀x [ prime (x) ∧  ~Two(x) → Odd (x) ]

5) All fruits are either yellow or red. Domain: produce.

∀x [ Fruits(x) → ( yellow(x) ∨ Red(x) ]

6) For every integer number, there exist a bigger integer. Domain: integers.

∀xэy [ I(x) → greater (y, x) ]

Answer:

Answer:

1) ∀x [ Tiger(x) → Fast(x) ]

2) эx [ Tiger (x) ∧ Fierce (x) ∧ Dangerous(x) ]

3) ∀x [ Prime(x) → Odd(x) ]

4) ∀x [ prime (x) ∧  ~Two(x) → Odd (x) ]

5) ∀x [ Fruits(x) → ( yellow(x) ∨ Red(x) ]

6) ∀xэy [ I(x) → greater (y, x) ]

Explanation:

Translating the statements into first Order Logic and their negations

1)   All tigers are fast. Domain: animals.

∀x [ Tiger(x) → Fast(x) ]

2)  Some tigers are fierce and dangerous. Domain: animals

эx [ Tiger (x) ∧ Fierce (x) ∧ Dangerous(x) ]

3) Every prime number is odd. Domain: positive integers

∀x [ Prime(x) → Odd(x) ]

4)  All prime numbers except two are odd. Domain: positive integers

∀x [ prime (x) ∧  ~Two(x) → Odd (x) ]

5) All fruits are either yellow or red. Domain: produce.

∀x [ Fruits(x) → ( yellow(x) ∨ Red(x) ]

6) For every integer number, there exist a bigger integer. Domain: integers.

∀xэy [ I(x) → greater (y, x) ]

Explanation:

Answer:

C₁₀ = 6.3 KN

Explanation:

The catalog rating of a bearing can be found by using the following formula:

C₁₀ = F [Ln/L₀n₀]^1/3

where,

C₁₀ = Catalog Rating = ?

F = Design Load = 2.75 KN

L = Design Life = 1800 rev/min

n = No. of Hours Desired = 10000 h

L₀ = Rating Life = 500 rev/min

n₀ = No. of Hours Rated = 3000 h

Therefore,

C₁₀ = [2.75 KN][(1800 rev/min)(10000 h)/(500 rev/min)(3000 h)]^1/3

C₁₀ = (2.75 KN)(2.289)

C₁₀ = 6.3 KN

Answer:

1. They needed to develop multiple components in software programs.

2. The ability to overlap the development to be more evolutionary in nature.

3. The need to be more risk-averse or the unwillingness to take risks led to the use of a spiral model.

Explanation:

Software development life cycle (SDLC) can be defined as a strategic process or methodology that defines the key steps or stages for creating and implementing high quality software applications.

In SDLC, a waterfall model can be defined as a process which involves sequentially breaking the software development into linear phases. Thus, the development phase takes a downward flow like a waterfall and as such each phase must be completed before starting another without any overlap in the process.

An incremental model refers to the process in which the requirements or criteria of the software development is divided into many standalone modules until the program is completed.

Also, a spiral model can be defined as an evolutionary SDLC that is risk-driven in nature and typically comprises of both an iterative and a waterfall model. Spiral model of SDLC consist of these phases; planning, risk analysis, engineering and evaluation.

What motivated software engineers to move from the waterfall model to the incremental or spiral model is actually due to the following fact;

Answer:

science is hard but human cloning this is legendary but still its up to the government but me i would allow this because its something that science can upgrade to

Explanation:

Answer:

Yes, this is completely independent.

Explanation:

Yes, this is completely independent. Even though there are no South American individuals that are majoring in biomedical engineering in this party it is still a completely independent factor. The origin of birth of an individual does not tie them to a specific degree or field of expertise, therefore a South American individual can study anything they want including mechanical engineering, electrical engineering, or biomedical engineering.

Answer:

attached below is the detailed solution and answers

Explanation:

Attached below is the detailed solution

C(iii) : versus the parameter C

The parameter C is centered in a nonlinear equation, therefore the standard locus will not apply hence when you use a polynomial solver the roots gotten would be plotted against C

Answer: a(s) is of degree n and b(s) is of degree n-1.

a)Characteristic equation in form suitable for Evans's root-locus method is given by a(s) + b(s)K = 0, where a(s) and b(s) are polynomials of s with real coefficients. Now, given equation can be represented as: s + (1/τ) = 0 => s + (1/τ) = 0s + (1/τ)K = 0=> K = -τs/τ + 0Thus, L(s) = s, a(s) = 1, b(s) = 1 and K = -τ.

b)The characteristic equation is given by:s^2 + cs + c + 1 = 0For the root-locus method, we have to write the characteristic equation in the form a(s) + b(s)K = 0. Since the degree of a(s) is 2, we select K such that the degree of b(s) is also 2, and so b(s) will be monic.s^2 + cs + c + 1 = 0=> (s + c/2)^2 + 1/4 - c^2/4 + c = 0=> s^2 + (2c)s + (1 + c - c^2/4) = 0Now, taking a(s) = s^2 + (2c)s + (1 + c - c^2/4) and b(s) = 1 with K = -1/c^2, we have:a(s) + b(s)K = s^2 + (2c)s + (1 + c - c^2/4) - 1/c^2 = 0

c) The characteristic equation is given by:(s + c)3 + A(Ts + 1) = 0

i. versus parameter A:s = -c is a repeated root of multiplicity 3 when A = 0For s = -c, the characteristic equation becomes:-A(Tc + 1) = 0If A = 0, the characteristic equation will be (s + c)^3 = 0 and will have a repeated root at s = -c with a multiplicity of 3.

ii. versus parameter T:s = -c is a repeated root of multiplicity 3 when T = 0.For s = -c, the characteristic equation becomes:3c^2s + A = 0If A = 0, the characteristic equation will be (s + c)^3 = 0 and will have a repeated root at s = -c with a multiplicity of 3.

iii. versus the parameter c:We cannot draw the root locus of (s + c)3 + A(Ts + 1) = 0 with respect to the parameter c because there is no c term in the characteristic equation; it only contains c cubed.

d) The characteristic equation is given by:1 + (kp + k1/s + kDs/Ts + 1)G(s) = 0Assuming G(s) = Ac(s)/d(s), where c(s) and d(s) are monic polynomials with the degree of d(s) greater than that of c(s), the characteristic equation becomes:

d(s) + kp d(s) + k1 d(s)/s + kDs c(s)/T = 0.

Thus, a(s) = d(s) + k1 d(s)/s and b(s) = kDc(s)/T + kp d(s) with K = -1.

Therefore, a(s) is of degree n and b(s) is of degree n-1.

Learn more about root-locus : https://brainly.com/question/18406313

#SPJ11

Answer:

fggffgethjbdxvgrsbjb you are my world I see the attached resume