Answers
Answer 1
Answer:
J tissue rejection
Explanation:
Tissue rejection, also known as transplant rejection occurs when transplanted tissue is rejected by the recipient's immune system, which destroys the transplanted tissue.
Related Questions
A client who is at 40-weeks gestation is brought to the labor and delivery unit via wheelchair from the emergency
center. The client reports that her membranes are ruptured and her contractions are 5 minutes apart. When the practical
nurse (PN) assists the client from the wheelchair to the labor bed, the PN notes that she is sitting in a large pool of fresh
blood. What should the PN do first?
A. Obtain maternal vital signs and fetal heart rate.
B. Pull the call bell and summon the RN to assess the client.
C. Apply the external fetal monitor to record contractions.
D. Move the wheelchair so the client does not see the blood.
Answers
A. Obtain maternal vital signs and fetal heart rate.
Jayla was pushed out of the way as she and another young woman reached for the same dress on the sales rack. Jayla felt like pushing the other woman back, but spoke up and said that she had been standing there before the other woman approached and pushed. Which part of her personality, according to Freud, does Jayla's behavior demonstrate?
Question 15 options:
A)
a. her id
B)
her ego
C)
her superego
D)
her self-control
Answers
Here is your answerHer self control
Explanation:
As she spoke out without thinking anything she should take self control on her.
Other Questions
In the homeowners policy example, personal property protection (Coverage C)is of dwelling protection (Coverage A).20 percent50 percent40 percent30 percent
Compute and plot the solution of the difference equation y[n] + y[n 1] =2x[n] + x[n 1], where x[n] = 0.8" u[n] assuming zero initial conditions. Moreover, verify your answer (a) by examining if the derived solution satisfies the difference equation and (b) by computing the solution with use of the command filter.
Calculate and tabulate the compressive strength for the set of results observed in class, also explain if the results are acceptable or not. REMARKS SERIAL OBSERVATION AREA FORCE APPLIED FORCE NR (MPa) 1 2 3 Result & findings Average compressive strength of the concrete cube = Average compressive strength of the concrete cube =.. .N/mm (at 7 days) .N/mm (at 28 days) W/C Type of curing Specimen size (mm) Load at failure (kN) 100 x 100 x 100 0.5 No curing 131 125 127 150 x 150 x 150 0.6 Standard curing 301 289 279 100 x 100 x 100 0.6 Standard curing 121 118 120 150 x 150 x 150 0.5 No curing 267 275 278 150 x 150 x 150 0.5 Standard curing 201.3 215.2 230.2 Force (MPA)
While a vision describes what an organization desires to become in the future, an organization's __________ is grounded in the past and present.QUESTION 5The most effective goals are specific, measurable, attainable, ________, and time-bound.QUESTION 6The vision of a company isCreated in collaboration with other stakeholder and leadershipWhat the organization aspires to be, the big goal it wants to accomplish.Developed within the organization's mission: its purpose for being.All the aboveQUESTION 7While missions and visions provide an overall sense of the organization's direction, __________ are narrower aims that should provide clear and tangible guidance to employees.GoalsBreaksSBUMeetings
a. What can you do to confirm if a referral has been successful?b. What would you do to address an unsuccessful referral with a client?c. How would you gain feedback from the organisation as to why the referral was unsuccessful?
3. (a) Consider the statement: The sum of any two integers is odd if and only if at least one of them is odd.(i)Define predicates as necessary and write the symbolic form of the statement using quantifiers.(ii) Prove or disprove the statement. Specify which proof strategy is used.(b) Consider the statement: If x and y are integers such that x + y 5, then x > 2 or y > 2.(i) Write the symbolic form of the statement using quantifiers.(ii) Prove or disprove the statement. Specify which proof strategy is used.(c) Consider the statement: The average of two odd integers is an integer.(i) Write the symbolic form of the statement using quantifiers.(ii) Prove or disprove the statement. Specify which proof strategy is used.(d) Consider the statement: For any three consecutive integers, their product is divisible by 6.(i) Write the symbolic form of the statement using quantifiers.(ii) Prove or disprove the statement. Specify which proof strategy is used.
According to the feedback in the implementation, we can classify an LTI system as: A. A recursive or non-recursive system. B. A finite impulse response or infinite impulse response system. c. All-zero or all-pole system. D. None of the above. E. All the above. 4- A shift in frequency (harmonic shift) correspond to: A. Multiplication of the time function by a complex phase factor. B. Multiplication of the continuous-time Fourier series coefficients by a complex phase factor. C. A shift in time. D. None of the above. E. All the above.
(c) A 3 phase 12 pole Permanent Magnet wind turbine generator (K t=3.1Nm/A rms) is connected to a diode rectifier + Buck DC-DC Converter + Resistive load. Using this information and the diode rectifier output (V o) characteristics shown on Figure Q3c determine the following: (i) The Rectifier output voltage for generator operation at 60 Hz,40 Arms phase current (assuming 90% generator efficiency). [4] (ii) The required load resistance and Buck Converter PWM duty cycle to output 48 VDC at this operating point (assuming 100% efficiency for rectifier and Buck converter). [3] (d) Describe in your own words the advantages and implementation of Field Oriented Control (FOC) of Brushless Permanent Magnet AC Motors. [6] V 0( V) Figure Q3c
6.b) The nonvolatile, nonelectrolyte urea, CH4N2O (60.10 g/mol), is soluble in water H2O.__________ grams urea6.c) The nonvolatile, nonelectrolyte glucose, C6H12O6 (180.20 g/mol), is soluble in water H2O.How many grams of urea are needed to generate an osmotic pressure of 27.1 atm when dissolved in 222 ml of a water solution at 298 K.The molarity of the solution is __________M.The osmotic pressure of the solution is ____________ atmospheres.
Do public bodies have the unlimited right to determine which offeror is the "lowest responsible bidder"? Group of answer choicesA. Public bodies have the absolute right and discretion to award contracts for construction which are in the best interests of the taxpayers.
There's a lot of poor-style HTML code in the world. Why?1.Group of answer choices2.Browsers are incredibly lenient3.It is not important to write a good-style HTML code.4.Poor-style code is easy to understand
Which statement can be concluded using the true statements shown?If two angles in a triangle measure 90 and x degrees, then the third angle measures (90-x) degrees.In triangle ABC, angle A measures 90 degrees and angle B measures 50.Angle C must measure 50 degrees.Angle C must measure 40 degrees.O Angle C must measure (90 - 40) degrees.O Angle C must measure (90-30) degrees.
1. A team of four students worked together on a research paper. While each person contributed to the study, some had greater involvement and responsibility for the manuscript than others. Two team members did everything from developing the study concept and design, data acquisition and interpretation, to writing and finalizing the draft of publication. The other two helped with the research, such as assisting with the lab experiments but had no input into the manuscript. Do all these authors fit the definition of the authorship, regardless of the journal?
6. What are the new trends in the development of intelligent equipment under the environment of Internet of things?Answer:7. What is the development direction of the infrastructure networks?Answer:8. Why is the sensing layer most important features of IoT distinguished from other networks?Answer:9. Qualitatively describe how the power supply requirements differ between mobile and portable cellular phones, as well as the difference between pocket pagers and cordless phones. How does coverage range impact battery life in a mobile radio system?Answer:10. Compared to Cloud Computing, what are the advantages of edge computing?Answer:
You are in charge of scheduling for computer science classes that meet either on MW or MWF. There are five classes to schedule and three professors who will be teaching these classes. You are constrained by the fact that each professor can only teach one class at a time. The classes are: Class 1 - CS 65 meets from 2:00pm-3:15pm MW Class 2 - CS 66 meets from 3:00-3:50pm MWF Class 3 - CS 143 meets from 3:30pm-4:45 pm MW Class 4 - CS 167 meets from 3:30pm-4:45 pm MW Class 5 - CS 178 meets from 4:00pm-4:50pm MWF The professors are: Professor A, who is available to teach Classes 1, 2, 3, 4, 5. Professor B, who is available to teach Classes 2, 3, 4, and 5. Professor C, who is available to teach Classes 3 and 4. (i) (3 pts) Formulate this problem as a CSP in which there is one variable per class, stating the domains of each variable, and constraints on the variables.
Discuss the symbolism in three of the plays you read in units 11 through 14. Work to identify important symbols you found in these plays. What do you think the symbols you found represent? How do these symbols affect the audience and help carry the theme of the plays they are from?A good answer will identify and discuss symbols from each of the plays you chose. The answer will not only say what the symbols are but also discuss the symbol and its significance to the play.A good answer will also, again, be at least three developed paragraphs long (one for each play you discuss).
Feedback control system to control the composition of the output stream in a stirred tank blending process is shown in Figure 11.1, page 176 of Textbook (as shown below). fig 11 Mass fraction x of the output stream is the controlled variable, flow rate w 2 of the input stream is the manipulated variable and mass fraction x 1 of the other input stream is the disturbance variable. The following data are available: Volume and density are constant. V= 3.2 m 3, rho= 900 kg/m 3 The process is operating at steady state with w 1=500 kg/min, w 2= 300 kg/min, x 1= 0.4, x 2= 0.8 G m= K m = 16 mA/(mass fraction), G v= K v = 20 kg/min mA The process transfer function G p= X(s)/W 2(s) = K 1 /(s+1) where = Vrho/w and K 1 =(1-x)/w The transfer function relative to the disturbance variable G d = X(s)/X 1(s) = K 2 /(s+1) where K 2 = w 1/w A PI controller is used with K c=3 and I = 1 min The set point for the exit mass fraction x is set at the initial steady state value. (a) If the disturbance variable x 1 is suddenly decreased to 0.2 from the initial steady state value of 0.4, derive an expression for the response of outlet composition x to this step change . (b) Calculate the composition of the exit stream (x) 1 minutes after the change. (c) Calculate the composition of the exit stream (x) 2 minutes after the change. (d) What is the composition x when a new steady state is reached? (e) What is the offset?
A set of class definitions and the console output is provided below. The main program is missing. A global function is also missing. Study the given code, console output and notes below. Then answer the question.class battery {public:double resistance = 0.01; //internal resistance valuedouble voltage = 12.0; //internal ideal source voltagedouble vbat = 0.0; //external battery terminal volatage initial valuedouble ibat = 0.0; //battery current initial value//Calculate and save vbat, assuming ibat is already knownvirtual void vbattery() = 0;//Calculate and save ibat, assuming vbat is already knownvirtual void ibattery() = 0;};class unloadedbattery : public battery {public://Calculate and save vbat, assuming ibat is already knownvirtual void vbattery() {vbat = voltage - (ibat * resistance);}//Calculate and save ibat, assuming vbat is already knownvirtual void ibattery() {ibat = (voltage - vbat) / resistance;}};class loadedbattery : public battery {public:double loadresistance;//Calculate and save vbat, assuming ibat is already knownvirtual void vbattery() {vbat = voltage * (loadresistance / (loadresistance + resistance));}//Calculate and save ibat, given that load is already knownvirtual void ibattery() {ibat = voltage / (loadresistance + resistance);}};Console output:What is the current demand (in Amperes) for the unloadedbattery model? 1.5Battery power output will be 17.9775 WattsWhat is the load resistance (in Ohms) for the loadedbattery model? 5.0Battery power output will be 28.6851 WattsNotes:a.Name the application QuestionTwo. The source file will be QuestionTwo.cpp.b.The main program will create an "unloadedbattery" object, ask the user for current demand (ibat), and calculate vbat using the appropriate method.c.It must then use a global function to calculate battery power output, which is vbat*ibat. However, main does not pass vbat and ibat to the function. Rather, main must only pass the unloadedbattery object to the function.d.Then main will create a "loadedbattery" object and ask the user for the load resistance. Then the methods can be used to calculate vbat and ibat.e.Once more, main must use the same global function to calculate battery power output and main must only pass the loadedbattery object to the function.f.The global function takes a single argument (either loadedbattery or unloadedbattery object) and it returns the power as a double. It does not print to the console.
I NEED A STEP BY STEP EXPLANATION PLEASE I DON"T UNDERSTAND THIS PLEASE
Let M_(Z) denote the set of 2 x 2 matrices with integer entries, and let + denote matrix addition and denote matrix multiplication. Given [a b] a -b A al then A' 0 1 as the 0 element and the 1 element, respectively, either prove that 0 [MA(Z), +,,', 0, 1) is a Boolean algebra or give a reason why it is not.