Help me please I will give points whenever u wanna

To find the general solution of the given differential equation:

y(4) + 2y" + 6y' + 324 + 40y = 0

We can rearrange the equation and combine like terms:

y(4) + 2y" + 6y' + 40y + 324 = 0

Simplifying further, we have:

2y" + 6y' + 44y + 324 = 0

Now, let's solve the homogeneous version of this equation, which is obtained by setting the equation equal to zero:

2y" + 6y' + 44y = 0

To solve this homogeneous linear ordinary differential equation, we assume a solution of the form y = e^(rt), where r is a constant. Substituting this into the equation, we get:

2r^2e^(rt) + 6re^(rt) + 44e^(rt) = 0

Factoring out e^(rt), we have:

e^(rt)(2r^2 + 6r + 44) = 0

For this equation to hold, either e^(rt) = 0 (which is not possible) or 2r^2 + 6r + 44 = 0. Solving the quadratic equation, we find the roots:

r = (-6 ± √(6^2 - 4 * 2 * 44)) / (2 * 2)

r = (-6 ± √(36 - 352)) / 4

r = (-6 ± √(-316)) / 4

Since the discriminant is negative, the roots are complex. Let's write the roots as:

r = (-6 ± √316i) / 4

r = (-3 ± √79i) / 2

The general solution for the homogeneous equation is:

y_h = C1e^(-3t/2)cos(√79t/2) + C2e^(-3t/2)sin(√79t/2)

Now, to find the general solution for the original non-homogeneous equation, we can use the method of undetermined coefficients. We assume a particular solution of the form:

y_p = At + B

Substituting this into the original equation, we have:

2(0) + 6A + 44(At + B) + 324 = 0

Simplifying, we get:

6A + 44At + 44B + 324 = 0

To satisfy this equation, we equate the coefficients of like terms:

44A = 0 => A = 0

6A + 44B + 324 = 0 => 44B = -6A - 324 => B = -3/11

Therefore, the particular solution is:

y_p = (-3/11)t

Finally, the general solution of the non-homogeneous equation is the sum of the homogeneous and particular solutions:

y = y_h + y_p

y = C1e^(-3t/2)cos(√79t/2) + C2e^(-3t/2)sin(√79t/2) - (3/11)t

where C1 and C2 are arbitrary constants.

A graph illustrating hypothetical demand and supply curves is shown below. The axes are labeled as price (P) on the vertical axis and quantity (Q) on the horizontal axis.

In the graph, the demand curve (D) is downward sloping, indicating that as price decreases, the quantity demanded increases. The supply curve (S) is upward sloping, indicating that as price increases, the quantity supplied also increases. The point where the two curves intersect represents the equilibrium, where the quantity demanded equals the quantity supplied.

The equilibrium price (P*) is determined at this point, and the equilibrium quantity (Q*) is the corresponding quantity exchanged at that price. This graphical representation helps illustrate the interaction between demand and supply in determining the market equilibrium.

To learn more about Price click here :

brainly.com/question/19091385

#SPJ11

A hypothetical demand curve is shown below:

A hypothetical demand curve is shown below:

Illustration of a decrease in quantity demanded on your graph is shown below:

The above demand curve shows that when price decreases from P1 to P2, the quantity demanded of the good increases from Q1 to Q2. In the second graph, the quantity demanded has decreased from Q2 to Q1 due to a decrease in any factor other than the good's price, such as income, prices of substitute products, or taste.

To know more on graph visit:

https://brainly.com/question/19040584

#SPJ11

In economics, demand refers to how much (quantity) of a good or service is desired by consumers. In a competitive market, the demand for a commodity is determined by the intersection of its price and the consumer's ability to buy it (represented by the curve known as the demand curve).

The quantity of a product demanded by consumers in a market is usually influenced by various factors, including price and other economic conditions. When the price of a good increases, consumers usually demand less of it, whereas when the price of a good decreases, consumers usually demand more of it.How to draw a hypothetical demand curve?The steps below outline how to draw a hypothetical demand curve:1. Determine the price of the product. This price will be represented on the vertical (y) axis of the graph.2. Determine the quantity of the product demanded at each price point. This quantity will be represented on the horizontal (x) axis of the graph.3. Plot each price/quantity pair on the graph.4. Connect the points to form the demand curve. Note that the demand curve is typically a downward-sloping curve. This means that as the price of the product increases, the quantity demanded decreases. Conversely, as the price of the product decreases, the quantity demanded increases.How to illustrate a decrease in quantity demanded on your graph?To illustrate a decrease in quantity demanded on a demand curve graph, one must:1. Select a price point on the demand curve.2. Move the point downward along the demand curve to indicate a decrease in quantity demanded.3. Plot the new price/quantity pair on the graph.4. Connect the new point with the other points on the demand curve to illustrate the decrease in quantity demanded.

To know more about intersection, visit:

https://brainly.com/question/12089275

#SPJ11

The values of z for the equation [tex]e^z[/tex] = -16e hold is z = ln(16e) + i(2n + 1) π where n∈Z.

Given that,

The equation is [tex]e^z[/tex] = -16e.

We have to find all values of z for which the equation hold.

We know that,

Take the equation

[tex]e^z[/tex] = -16e

[tex]e^z[/tex] = [tex]e^{x+iy}[/tex]           [Since by modulus of complex number z = x + iy]

[tex]e^z[/tex] = [tex]e^{x+iy}[/tex] = -16e

[tex]e^{x+iy}[/tex] = -16e

We can  [tex]e^{x+iy}[/tex] as

[tex]e^x[/tex](cosy + isiny) = 16e(-1)

By compare [tex]e^x[/tex] = 16e, cosy = -1, siny = 0

Now, we get y = (2n + 1) π and x = ln(16e)

Then z = ln(16e) + i(2n + 1) π where n∈Z

Therefore, The values of z for which the equation hold is z = ln(16e) + i(2n + 1) π where n∈Z.

To know more about equation visit:

https://brainly.com/question/785300

#SPJ4

p-value = 1 - 0.0764 = 0.9236 (rounded to four decimal places)

Therefore, the p-value is approximately 0.9236.

To find the p-value for a one-tail hypothesis test when rejecting the null hypothesis only in the lower tail, you need to calculate the area under the standard normal distribution curve to the left of the given Z-statistic.

Given ZSTAT = -1.43, we want to find the probability that a standard normal random variable is less than -1.43.

Using the standard normal distribution table, locate the absolute value of -1.43 (which is 1.43) and find the corresponding value in the table. The value in the table represents the cumulative probability up to that point.

Looking up the value 1.43 in the standard normal distribution table, we find the corresponding cumulative probability as approximately 0.0764.

However, since we are performing a one-tail test in the lower tail, we need to subtract this cumulative probability from 1 to get the p-value:

p-value = 1 - 0.0764 = 0.9236 (rounded to four decimal places)

Therefore, the p-value is approximately 0.9236.

Learn more about p-value:

https://brainly.com/question/13786078

#SPJ11

Given equation is: y" + 7y' + 6y = 36e31, y(0) = -6, y'(0) = 20

To solve the initial value problem using Laplace transforms we have to take the Laplace transform of the given differential equation and solve for Y(s), and then apply the inverse Laplace transform to obtain the solution y(t). Applying the Laplace transform to the given differential equation,

we get: L{y"} + 7L{y'} + 6L{y} = 36L{e31}

Taking Laplace transform of both sides L{y"} = s²Y(s) - s y(0) - y'(0)L{y'} = sY(s) - y(0)L{y} = Y(s)

Therefore, the Laplace transform of the given differential equation is: s²Y(s) - s y(0) - y'(0) + 7sY(s) - 7y(0) + 6Y(s) = 36 / (s - 31)

Simplifying, we get: (s² + 7s + 6) Y(s) = 36 / (s - 31) + s y(0) + y'(0) + 7y(0) …… equation (1)

Substitute the given initial conditions in equation (1), we get: (s² + 7s + 6) Y(s) = 36 / (s - 31) + s(-6) + (20) + 7(-6)

Simplifying, we get: (s² + 7s + 6) Y(s) = 36 / (s - 31) - 92(s + 1) / (s + 1)(s + 6)

Now, factor the polynomial in the denominator of the right side using partial fractions. The expression 92(s + 1) / (s + 1)(s + 6) can be written as: 92(s + 1) / (s + 1)(s + 6) = A / (s + 1) + B / (s + 6) Multiplying by the common denominator,

we get: 92(s + 1) = A(s + 6) + B(s + 1)

Substituting s = -1 in the above equation, we get: 92(0) = A(5) + B(-1)

Simplifying, we get:-B = 0 or B = 0Substituting s = -6 in the above equation,

we get:92(-5) = A(0) + B(-5)

Simplifying, we get: B = 92 / 5 or A = 0

So, the expression 92(s + 1) / (s + 1)(s + 6) can be written as:

92(s + 1) / (s + 1)(s + 6) = 92 / 5 (1 / (s + 1)) + 0 (1 / (s + 6))

Now, substituting the values of A and B in the right side of equation (1),

we get:(s² + 7s + 6) Y(s) = 36 / (s - 31) - 92 / 5 (1 / (s + 1))

Applying the inverse Laplace transform to both sides, we get: y''(t) + 7y'(t) + 6y(t) = 36e31 - 92/5 e-t, y(0) = -6, y'(0) = 20

Hence, the solution of the given differential equation is y(t).

To know more about polynomial refer to:

https://brainly.com/question/15702527

#SPJ11

To find the Z-scores that separate the middle 38% of the distribution from the area in the tails of the standard normal distribution, we can use the properties of the standard normal distribution and its symmetry. The Z-scores represent the number of standard deviations away from the mean.

The standard normal distribution has a mean of 0 and a standard deviation of 1. Since the distribution is symmetric, we can determine the Z-scores that separate the middle 38% by finding the Z-scores that symmetric, the Z-score for the upper end of the middle 38% is the negation of the Z-score for the lower end, so the Z-score for the upper end is approximately 0.479.
Therefore, the Z-scores that separate the middle 38% of the distribution from the area in the tails of the standard normal distribution are approximately -0.479 and 0.479.symmetric, the Z-score for the upper end of the middle 38% is the negation of the Z-score for the lower end, so the Z-score for the upper end is approximately 0.479.
Therefore, the Z-scores that separate the middle 38% of the distribution from the area in the tails of the standard normal distribution are approximately -0.479 and 0.479.

 learn more about standard normal distribution here

https://brainly.com/question/25279731



#SPJ11

The average velocity of the bicyclist during the 2-hour time interval is 11 miles per hour.

To find the average velocity, we divide the total distance traveled by the total time taken. In this case, the bicyclist traveled 22 miles in 2 hours and 45 minutes. To calculate the time in hours, we convert the 45 minutes to its equivalent fraction of an hour by dividing it by 60, which gives us 0.75 hours. Now, we add the 2 hours and 0.75 hours together to get a total time of 2.75 hours.

Next, we divide the distance traveled (22 miles) by the total time (2.75 hours). Dividing 22 by 2.75 gives us an average velocity of 8 miles per hour. Therefore, the bicyclist's average velocity during the entire 2-hour time interval is 8 miles per hour. This means that, on average, the bicyclist covered a distance of 8 miles in one hour. It is important to note that average velocity is a scalar quantity and does not take into account the direction of motion.

Learn more about interval here:

https://brainly.com/question/11051767

#SPJ11

a) The set B ∩ A is written as B ∩ A = {2}. b) The set (A ∩ B) ∪ C is written as (A ∩ B) ∪ C = {1, 2, 3, 5, 7, 9}. c) An example of an element of A × B is (1, 2). d) The number of elements in the Cartesian product A × B i.e, n(A × B) is 12.

In the given exercise, sets U, A, B, and C are provided, and various operations are performed on these sets.

Set operations such as intersection, union, and Cartesian product are used to derive the required sets and elements.

a) The set B ∩ A (BnA) represents the intersection of sets B and A, which consists of the elements that are common to both sets.

In this case, B ∩ A = {2}.

b) The set (A ∩ B) ∪ C represents the union of the intersection of sets A and B with set C.

First, we find A ∩ B, which is the intersection of sets A and B and consists of the common elements: A ∩ B = {2}.

Then, we take the union of this intersection with set C:

(A ∩ B) ∪ C = {2} ∪ {1, 3, 5, 7, 9} = {1, 2, 3, 5, 7, 9}

c) The Cartesian product of sets A and B, denoted as A x B, represents the set of all possible ordered pairs where the first element comes from set A and the second element comes from set B.

An example of an element of A × B (the Cartesian product of A and B) would be (1, 2).

This represents an ordered pair where the first element is from set A and the second element is from set B.

d) The number of elements in the Cartesian product A × B (n(A × B)) can be found by multiplying the number of elements in set A by the number of elements in set B.

In this case, A has 3 elements (1, 2, 3) and B has 4 elements (2, 4, 6, 8), so n(A × B) = 3 × 4 = 12.

Learn more about Set operations here:

https://brainly.com/question/29328647

#SPJ11

The correct answer: C) do not reject the null hypothesis and conclude that the mean IQ is not greater than 100.

The null hypothesis, H0: μ ≤ 100, is tested against the alternative hypothesis, Ha: μ > 100, to determine whether the mean IQ of employees in an organization is greater than 100. The sample size is 30 and the computed value of the test statistic is t29 = -2.42.

At the 5% level of significance, we have a one-tailed test with critical region in the right tail of the t-distribution. For a one-tailed test with a sample size of 30 and a significance level of 5%, the critical value is 1.699.

Since the computed value of the test statistic is less than the critical value, we fail to reject the null hypothesis and conclude that the mean IQ is not greater than 100.

Option C is therefore the correct answer: do not reject the null hypothesis and conclude that the mean IQ is not greater than 100.

Know more about null hypothesis here,

https://brainly.com/question/30821298

#SPJ11

a) The domain of fog is the domain of g, and the codomain of fog is the codomain of f. b) If both f and g are one-to-one, then fog is also one-to-one. c) If both f and g are onto, then fog is also onto.

a) The composition of functions, fog, is defined as the function that applies g to an element in its domain and then applies f to the result. Therefore, the domain of fog is the same as the domain of g, which is A. The codomain of fog is the same as the codomain of f, which is C.

b) To prove that fog is one-to-one when both f and g are one-to-one, we need to show that for any two distinct elements a₁ and a₂ in the domain of g, their images under fog, (fog)(a₁) and (fog)(a₂), are also distinct.

Let (fog)(a₁) = (fog)(a₂). This means that f(g(a₁)) = f(g(a₂)). Since f is one-to-one, g(a₁) = g(a₂). Now, since g is one-to-one, it follows that a₁ = a₂. Thus, we have shown that if a₁ ≠ a₂, then (fog)(a₁) ≠ (fog)(a₂). Therefore, fog is one-to-one.

c) To prove that fog is onto when both f and g are onto, we need to show that for any element c in the codomain of f, there exists an element a in the domain of g such that (fog)(a) = c.

Since f is onto, there exists an element b in the domain of g such that f(b) = c. Additionally, since g is onto, there exists an element a in the domain of g such that g(a) = b. Therefore, (fog)(a) = f(g(a)) = f(b) = c. This shows that for every c in the codomain of f, there exists an a in the domain of g such that (fog)(a) = c. Thus, fog is onto.

Learn more about codomain here:

https://brainly.com/question/17311413

#SPJ11

a) the expression for the amount of water in the tank after 1 minute is 75 liters. b) the differential equation for X(0) is: dX/dt = 104 - (3 * X(0) / 70)

(a) To find an expression for the amount of water in the tank after 1 minute, we need to consider the rate at which water is pumped into and out of the tank.

After 1 minute, the amount of water in the tank will be:

Initial amount of water + (Rate in - Rate out) * Time

Amount of water after 1 minute = 70 + (8 - 3) * 1

Amount of water after 1 minute = 70 + 5

Amount of water after 1 minute = 75 liters

Therefore, the expression for the amount of water in the tank after 1 minute is 75 liters.

(b) Let X(t) be the amount of salt in the tank after 6 minutes. We need to find the differential equation for X(0).

The rate of change of salt in the tank can be represented by the differential equation:

dX/dt = (Rate in * Concentration in) - (Rate out * Concentration out)

Concentration in = 13 grams of salt per liter (as given)

Concentration out = X(t) grams of salt / Amount of water in the tank

Substituting the values, the differential equation becomes:

dX/dt = (8 * 13) - (3 * X(t) / 70)

Therefore, the differential equation for X(0) is:

dX/dt = 104 - (3 * X(0) / 70)

Learn more about differential equation at https://brainly.com/question/1164377

#SPJ1

Sampling error can play a significant role in making statistical inferences from a researcher's perspective,when drawing conclusions and making decisions based on the findings.

Sampling error refers to the discrepancy or difference between the characteristics of a sample and the characteristics of the population from which it is drawn. It occurs due to the inherent variability in the sample selection process. In the context of the movie industry and market research, sampling error can influence the generalizability of the findings and the accuracy of the inferences made.

In the provided scenario, the samples used for the surveys and tests are selected from specific age groups and demographics. The results obtained from these samples may not perfectly represent the entire population of moviegoers or potential consumers. There may be variations and differences in preferences, reactions, and behaviors among the larger population that are not captured in the samples. This can introduce sampling error and affect the generalizability of the findings.

To minimize sampling error and increase the reliability of the inferences, researchers employ various sampling techniques and statistical methods. These include random sampling, stratified sampling, and statistical analysis to estimate and account for the potential error. However, it is important to acknowledge that sampling error is inherent in any research study, and its impact should be carefully considered when drawing conclusions and making decisions based on the findings.

Learn more about sampling error here:

https://brainly.com/question/30891212

#SPJ11

Null hypothesis: Population correlation coefficient is equal to zero.

Alternate hypothesis: Population correlation coefficient is greater than zero. Level of significance: α = 0.05Calculation of test statistic: We need to calculate the test statistic which follows t-distribution. Assuming the null hypothesis, we have; r = 0. We need to calculate the degrees of freedom for the t-distribution which is given by; df = n - 2= 284 - 2= 282Using the formula for the t-test, we have; t = (r√(df))/√(1 - r²)= (0.2291√(282))/√(1 - 0.2291²)= 5.31. Using the t-distribution table, we find the p-value corresponding to the obtained t-value; p-value = P(T > 5.31)Since the alternate hypothesis is greater than zero, we calculate the p-value for right-tailed test. p-value = P(T > 5.31)≈ 0. Comparing the obtained p-value with the level of significance, we have; p-value < α∴. We reject the null hypothesis.

Conclusion: Hence, there is sufficient evidence to suggest that the population correlation coefficient is positive.

To know more about correlation, click here:

https://brainly.com/question/30116167

#SPJ11

The solutions to the given system of differential equations are x(t) = 0 and y(t) = 0

The system of differential equations using Laplace transforms, we'll take the Laplace transform of both equations and solve for X(s) and Y(s), where X(s) and Y(s) are the Laplace transforms of x(t) and y(t) respectively.

The given system of differential equations is:

dx/dt = -x + y ...(1) dy/dt = 2x ...(2)

x(0) = 0,

y(0) = 8

Taking the Laplace transform of equation (1), we get:

sX(s) - x(0) = -X(s) + Y(s)

sX(s) = -X(s) + Y(s) ...(3)

Taking the Laplace transform of equation (2), we get:

sY(s) - y(0) = 2X(s)

sY(s) = 2X(s) ...(4)

Substituting the initial conditions x(0) = 0 and y(0) = 8 into equations (3) and (4), we have:

sX(s) = -X(s) + Y(s) sY(s) = 2X(s) X(s) = sY(s) ...(5)

Substituting equation (5) into equation (3), we have:

sX(s) = -X(s) + X(s)

sX(s) = 0

X(s) = 0

Substituting X(s) = 0 into equation (5), we get:

0 = sY(s)

Y(s) = 0

Now, we'll find the inverse Laplace transforms of X(s) and Y(s) to obtain the solutions x(t) and y(t).

Taking the inverse Laplace transform of X(s), we have:

x(t) = L⁻¹{X(s)} = L⁻¹{0} = 0

Taking the inverse Laplace transform of Y(s), we have:

y(t) = L⁻¹{Y(s)} = L⁻¹{0} = 0

Therefore, the solutions to the given system of differential equations are x(t) = 0 and y(t) = 0.

To know more about differential equations click here :

https://brainly.com/question/30745025

#SPJ4

Option pricing using a tree structure and risk-neutral probabilities to determine present values and the Black-Scholes-Merton model: Option pricing based on stock price, strike price, time, volatility, and interest rates.

1. The binomial model is a mathematical model used to price options and analyze their behavior. It consists of two main components: the binomial tree and the concept of risk-neutral probability. The binomial tree represents the possible price movements of the underlying asset over time, with each node representing a possible price level.

2. The Black-Scholes-Merton model is a mathematical model used to price European-style options and other derivatives. It consists of several component parts.

To learn more about “the binomial model” refer to the https://brainly.com/question/15246027

#SPJ11

The optimal point in order to get the maximum profit is 1550.

Given constraints are:

x + 2y ≤ 40 ........(1)

4x + 3y ≤ 120 .........(2)

x≥ 10, y ≥ 10

Now, we need to find the optimal point in order to get the maximum profit.

Maximize Z=50x + 60y

Let's put the value of y = 10 in the given equation

Maximize Z=50x + 60(10)

Z = 50x + 600 ........(3)

Now, we will convert equations (1) and (2) in terms of x only as follows:

x ≤ 40 - 2y

x ≤ 30 - 3/4y

Substituting x = 10, we get:

y ≤ 15

x = 10,

y = 15 satisfies all the constraints.

Now, substituting these values in equation (3), we get:

Z = 50(10) + 60(15)

Z = 1550

Therefore, the maximum profit is 1550.

To know more about profit,

https://brainly.com/question/26483369

#SPJ11

We can conclude that the results obtained above were primarily due to the mean for the third treatment being noticeably different from the other two sample means.

Given that Treatment A B C

Mean 7.33 6.33 7.67

SD 2.236 1.732 2.646

F-ratio 3.33

p-value 0.075

Conclusion These data do not provide evidence of a difference between treatments.

The F-ratio for the new data will be lower than the F-ratio for the original data. This is because the difference between the means of the three treatments has been reduced. When the difference between the means is smaller, the F-ratio will be smaller.

The F-ratio for the new data is not significant, which means that there is not enough evidence to conclude that there is a difference between the treatments. The p-value of 0.075 is greater than the alpha level of 0.05, so we cannot reject the null hypothesis.

Therefore, we conclude that the results obtained above were primarily due to the mean for the third treatment being noticeably different from the other two sample means.

Learn more about hypothesis on

https://brainly.com/question/606806

#SPJ1

The result is consistent with the previous calculation, and option C, 3.682, is the correct answer.

To calculate log4 57 to the nearest thousandth, we can use a scientific calculator or a logarithmic table.

Using a calculator, we can find the logarithm of 57 to the base 4 directly:

log4 57 ≈ 3.682

Therefore, the correct answer is option C: 3.682.

If you prefer to verify the result using logarithmic properties, you can do so as follows:

Let's assume log4 57 = x. This means [tex]4^x[/tex] = 57.

Taking the logarithm of both sides with base 10:

log ([tex]4^x[/tex]) = log 57

Using the logarithmic property log ([tex]a^b[/tex]) = b [tex]\times[/tex] log a:

x [tex]\times[/tex] log 4 = log 57

Dividing both sides by log 4:

x = log 57 / log 4

Using a calculator to evaluate the logarithms:

x ≈ 3.682

Thus, the result is consistent with the previous calculation, and option C, 3.682, is the correct answer.

For more such answers on logarithmic table

https://brainly.com/question/21842400

#SPJ8

The expression 5[cos(pi/4) = 1 sin (pi/4)] raised to the 3rd power  simplifies to 125.

It can be simplified as follows.

1) Evaluate the trigonometric functions inside the brackets.

cos(pi/4) = 1/sqrt(2) and sin(pi/4) = 1/sqrt(2).

So the expression becomes 5[(1/sqrt(2)) = (1/sqrt(2))]^3.

2) Simplify the expression inside the brackets.

(1/sqrt(2)) = (1/sqrt(2)) can be rewritten as 1/(sqrt(2))^2.

Since (sqrt(2))^2 = 2, the expression becomes 1/2.

3) Substitute the simplified expression back into the original expression.

The original expression is now 5(1/2)^3.

4) Evaluate the exponent.

(1/2)^3 = (1/2) * (1/2) * (1/2) = 1/8.

5) Multiply the result by 5.

5 * 1/8 = 5/8.

Therefore, the given expression simplifies to 125.

To know more about expression refer here:

https://brainly.com/question/14083225

#SPJ11

The probability of selecting 4 youngest students out of 15 students is given by; P(E) = `n(E)/n(S)`= `1/15C4`So, the probability that 4 students selected from 15 students are the youngest is `1/15C4`.

Given, In a small private school, 4 students are randomly selected from available 15 students. We need to find the probability that they are the youngest students.

Now, let the youngest 4 students be A, B, C, and D.

Then, n(S) = The number of ways of selecting 4 students from 15 students is given by `15C4`.

As we want to select the 4 youngest students from 15 students, the number of favourable outcomes is given by n(E) = The number of ways of selecting 4 students from 4 youngest students = `4C4 = 1`.

The probability of selecting 4 youngest students out of 15 students is given by; P(E) = `n(E)/n(S)`= `1/15C4`So, the probability that 4 students selected from 15 students are the youngest is `1/15C4`.

Visit here to learn more about probability brainly.com/question/32117953

#SPJ11

The area of the kite is [tex]66 \ cm^2[/tex].

To find the area of a kite, you can use the formula: Area = [tex]\frac{(diagonal \ 1 \times diagonal \ 2)}{2}[/tex]

In this case, the measurements given are [tex]6[/tex] cm, [tex]1[/tex] cm, and [tex]11[/tex] cm. However, it is unclear which measurements correspond to the diagonals of the kite.

If we assume that the 6 cm and 11 cm measurements are the diagonals, we can calculate the area as follows:

Area = [tex]\frac{6 \times 11 }{2}[/tex]

= [tex]66[/tex] cm²

If the [tex]1[/tex] cm measurement is one of the diagonals, and the other diagonal is unknown, it is not possible to calculate the area accurately without the measurement of the other diagonal. Without knowledge of the lengths of both diagonals of the kite, it is not possible to determine the exact area as it depends on the specific dimensions.

Therefore, the area of the kite is [tex]66 \ cm^2[/tex].

For more such questions on area:

https://brainly.com/question/26403859

#SPJ8

A)The 2 decimal places height of the model airplane is 1560 feet.

B) The length of the model airplane is 20.172 centimeters.

C)The wingspan of the model airplane  32.526 inches.

To determine the height of the model airplane with a scale ratio of 1:40, the proportion:

Actual height / Model height = Actual scale / Model scale

The actual height of the Airbus A320 is 39 feet, and the model scale is 1:40 represent the model height as 'x.'

39 feet / x = 1 / 40

To solve for x, cross-multiply and then divide:

39 ×40 = x × 1

1560 = x

To determine the length of the model airplane with a scale ratio of 1 cm:5 ft, a proportion using the actual length of the Airbus A320, which is 123 feet.

The model length be 'x' centimeters.

123 feet / x = 5 ft / 1 cm

The units for consistency. Since 1 foot is equal to 30.48 centimeters:

123 feet / x = 5 ft / (1 cm × 30.48 cm/ft)

123 feet / x = 5 ft / (30.48 cm)

123 feet / x = 5 ft / 30.48

123 feet / x = 0.164 ft/cm

To solve for x, cross-multiply and then divide:

123 × 0.164 = x × 1

20.172 = x

To determine the wingspan of the model airplane with a ratio of 3 inches:10 feet, a proportion using the actual wingspan of the Airbus A320, which is 117 feet.

The model wingspan be 'x' inches.

117 feet / x = 10 ft / 3 inches

The units for consistency. Since 1 foot is equal to 12 inches:

117 feet / x = 10 ft / (3 inches × 12 inches/ft)

117 feet / x = 10 ft / (36 inches)

117 feet / x = 0.278 ft/inch

To solve for x,  cross-multiply and then divide:

117 ×0.278 = x × 1

32.526 = x

To know more about decimal here

https://brainly.com/question/30958821

#SPJ4

The margin of error at a 95% confidence level is approximately 16.31 hours.

To compute the margin of error at a 95% confidence level, we can use the formula:

Margin of Error = Z * (Sample Standard Deviation / √n)

Where:

Z is the z-score corresponding to the desired confidence level (95% confidence level corresponds to a z-score of 1.96).

Sample Standard Deviation is the standard deviation of the sample.

n is the sample size.

Given:

Sample mean life span: 550 hours

Sample standard deviation: 45 hours

Sample size: 29

Substituting the values into the formula:

Margin of Error = 1.96 * (45 / √29)

Calculating the result:

Margin of Error ≈ 1.96 * (45 / √29) ≈ 1.96 * (8.33) ≈ 16.31

Therefore, the margin of error at a 95% confidence level is approximately 16.31 hours.

Know more about the margin of error click here:

https://brainly.com/question/29419047

#SPJ11

Given that cars run the red light at the intersection of an avenue and first street at a rate of 2 per hour, we need to find what distribution should be used to calculate the probability that no cars run the red light at the identified intersection on May 1st.In order to calculate the probability no cars run the red light at the identified intersection on May 1st, we can use the Poisson distribution.

The Poisson distribution is used to model the number of events occurring within a given time period, provided that the events occur independently and at a constant average rate.In this case, we know that the rate of cars running the red light is 2 per hour. To find the probability that no cars run the red light at the intersection on May 1st, we need to determine the expected number of cars running the red light on that day. Since there are 24 hours in a day, the expected number of cars running the red light on May 1st is: Expected number of cars = rate x time = 2 x 24 = 48Using the Poisson distribution formula, we can calculate the probability of no cars running the red light:P(0) = (e^-λ) * (λ^0) / 0!, where λ is the expected number of cars running the red light on May 1st.P(0) = (e^-48) * (48^0) / 0!P(0) = e^-48P(0) ≈ 1.22 × 10^-21Therefore, the probability of no cars running the red light at the identified intersection on May 1st is approximately 1.22 × 10^-21.

To know more about Poisson distribution, visit:

https://brainly.com/question/28437560

#SPJ11

The probability no cars run the red light at the intersection of Avenue and First Street on May 1st is 0.1353.

The appropriate distribution that should be used to calculate the probability no cars run the red light at the intersection of Avenue and First Street on May 1st is Poisson Distribution.

A Poisson Distribution is a probability distribution that gives the probability of a certain number of events happening in a set period of time, given the average number of times the event occurred in that period of time. T

he number of events occurring in a fixed period of time can be considered a random variable that follows a Poisson distribution when the events are independent and randomly distributed over the time period involved.

Formula used to calculate probability using Poisson distribution is given below:

[tex]P(x) = (e^-λ) (λ^x) / x![/tex]

Where λ = Mean (average) number of events occurring in the given time period,

x = Number of events to be calculated.

The rate at which cars run the red light at the intersection of a Avenue and First Street is given as 2 per hour.

The probability no cars run the red light at the intersection on May 1st can be calculated by using the following formula:

[tex]P(0) = (e^-2) (2^0) / 0!P(0) = (1) (1 / e^2)P(0) = 0.1353[/tex]

Therefore, the probability no cars run the red light at the intersection of Avenue and First Street on May 1st is 0.1353.

To know more about distributions, visit:

https://brainly.com/question/29664127

#SPJ11

Answer:

36 is the correct answer hope it helps

-2.6

-2.2

-2.193

-2.01

In this case, being that they are all negative numbers:

The higher the number, the smallest it is.

The smaller the number, the closer to 0 it is and will be the highest one of them all.

a. The probability that a randomly selected male college student gains between 0 kg and 3 kg during their freshman year is approximately 0.2877. b. The probability that the mean weight is between 0 kg and 3 kg is approximately 0.8385. c. The normal distribution can be used in part (b) because of the central limit theorem.

a. We can use the standard normal distribution to find the corresponding z-scores and then use a z-table or statistical software to find the area. The probability is approximately 0.2877.

b. The central limit theorem states that when the sample size is sufficiently large (typically greater than 30), the sampling distribution of the mean tends to be approximately normally distributed, regardless of the shape of the population distribution. In this case, even though the sample size is 4, the normal distribution can still be used because the underlying population distribution (weight gain of male college students) is assumed to be normally distributed.

c. The central limit theorem allows us to use the normal distribution for the sampling distribution of the mean, even when the sample size is small. This is because the theorem states that as the sample size increases, the sampling distribution approaches a normal distribution. In practice, a sample size of 30 or more is often used as a guideline for the applicability of the normal distribution.

Learn more about normal distribution here:

https://brainly.com/question/15103234

#SPJ11

Graphically estimating the age of the fossil with 18% of the original carbon-14 content involves determining the number of half-lives that have passed.  Therefore, the fossil is estimated to be between 11400 and 17100 years old.

Since the half-life of carbon-14 is 5700 years, we can divide the remaining carbon-14 content (18%) by the initial amount (100%) to obtain 0.18. Taking the logarithm base 2 of 0.18 gives us approximately -2.5146.

In the graph, we can plot the ratio of remaining carbon-14 to the initial amount on the y-axis, and the number of half-lives on the x-axis. The value of -2.5146 lies between -2 and -3 on the x-axis, indicating that the fossil is between 2 and 3 half-lives old.

Since each half-life is 5700 years, multiplying the number of half-lives by the half-life period gives us the age estimate.

to learn more about number click here:

brainly.com/question/30752681

#SPJ11

The  expression contains two terms: 4y and -6y^2. The constant term -9 is not considered a separate term since it does not contain the variable y. Hence, the answer is (b) 2 terms.

To simplify the expression 4y - 6y^2 - 9, we can combine like terms. Like terms are those that have the same variable(s) raised to the same exponent(s). In this case, we have two terms with the variable y: 4y and -6y^2.

The  coefficient 4 in 4y does not have the same exponent as the coefficient -6 in -6y^2, so these terms cannot be combined. Therefore, the expression contains two terms: 4y and -6y^2. The constant term -9 is not considered a separate term since it does not contain the variable y. Hence, the answer is (b) 2 terms.

Visit to know more about Constant:-

brainly.com/question/27983400
#SPJ11