Answer:
The answer to your question is 15
"Which type of reaction is used to measure immune complex formation almost immediately after reagent has been added by the amount of light scattered at a particular angle"
Answer:
nephelometry
Explanation:
Please mark as brainliest if this helped you
Part C
Next Emmerson pours dark blue–colored water on the soil around the well. The pictures show how his model looked over time. What do you observe?
Answer:
I obseve that the water is turnign a little green in the begining but when the water hit the gravel and dirt it became realy blue
Explanation:
Mark brainliest idc
Answer:
I observe that the water started off by turning green and the higher the water went the more blue it had gotten.
Explanation: lazy answer but if you want an answer here you go:)
do you think organisms who live in the artic would survive in the desert? Do you think organisms in the desert would survive in the artic? Why or why not?
Answer:
I'd say probably not
Explanation:
Organisms have evolved to survive and thrive in particular environmental conditions, specifically focusing on food supply, temperature, terrain, etc.. Therefore, desert animals would not be equipped with the insulation to survive in cold climates like the artic, and would freeze to death, and artic animals would most likely die from heat exhaustion in the desert. Additionally, fish, which is a main food source for articles animals, are not available in the desert, and it's the same case for desert animals in the artic. Finally, those organisms' enzymes and proteins, which make up their being and are the reason they can function, are only optimal in the temperature range in which they normally live; therefore, switching to such drastically different climate would result in their enzymes denaturing and their cell and eventual organism death.
Did you know that
1-7=0
Answer:
No I didn’t
Explanation:
Someone pls help I have no clue what I’m doing
How many atoms of each element are in the compound AgNO3? (Hint: Ag is the
symbol for silver, N is the symbol for nitrogen, and O is the symbol for oxygen.)
1 silver, 1 nitrogen and 3 oxygen
Subscripts show the number of atoms of each element in a compound
There is no subscript after Ag which shows there is only one silver atom. There is no subscript after N which shows there is only one nitrogen atom. However, there is a 3 in the subscript after O which shows there are 3 oxygen atoms
4. Which elements have a completely full outermost energy level?
Answer:
Helium (He), neon (Ne), and argon (Ar), as group 18 elements, have outer electron shells that are full or satisfy the octet rule. This makes them highly stable as single atoms. Because of their non-reactivity, they are called the inert gases or noble gases.
Explanation:
can i get brainliest
Calculate the solubility of copper (II) iodate in 0.16 M copper (II) nitrate. Ksp* is 7.4x10-8 M3. *You should know that the Ksp must refer to the copper iodate because all nitrate compounds are soluble and strong electrolytes!
Answer:
solubility in presence of 0.16M Cu(IO₃⁻)₂ = 3.4 x 10⁻⁴M*
Explanation:
Cu(IO₃⁻)₂ ⇄ Cu⁺² + 2(IO₃⁻)
C(i) ---------- 0.16M 0M
ΔC ---------- +x +2x
C(f) ---------- 0.16 + x ≅ 0.16M* 2x
Ksp = [Cu⁺²][IO₃⁻]²
7.4 x 10⁻⁸M³ = 0.16M(2x)² = 0.64x²
x = solubility in presence of 0.16M Cu(IO₃⁻)₂ = SqrRt(7.4x10⁻⁸M³/0.64M²)
= 3.4 x 10⁻⁴M*
*Note: This is consistent with the common ion effect in that a reduction in solubility is expected. The normal solubility of Cu(IO₃⁻)₂ in pure water at 25°C is ~2.7 x 10⁻³M.
Who was the first person to introduce the concept of atomic mass?
What is function of phylloclade
In some plants such as Cactuses, the stem is flattened and green and carries out the function of the leaf. Such a stem, adapted for the manufacture of food is called phylloclade. The leaves here are reduced or modified into spines to lessen the transpiring surface.
oncepts
4 List What are some of the physical properties
of stars?
Answer:
Brightness. Two characteristics define brightness: luminosity and magnitude. ...
Color. A star's color depends on its surface temperature. ...
Surface Temperature. ...
Size. ...
Mass.
Explanation:
there
use the principles of atomic structure and/or chemical bonding to explain each of the following. in each part, your answers must include references to both substances. the atomic radius of li is larger than that of be. the second ionization energy of k is greater than the second ionization energy of ca. the carbon-to-carbon bond energy in c2h4 is greater than it is in c2h6. the boiling point of cl2 is lower than the boiling point of br2.
1. Atomic Radius:
Atomic radius increases down a group and decreases across a period. Lithium (Li) has a larger atomic radius than beryllium (Be) due to Li's additional electron shell. Be has fewer shells, resulting in a smaller radius.
2. 2nd Ionization:
Second ionization energy is the energy needed to remove a second electron. Potassium (K) has higher second ionization energy than calcium (Ca) due to K's electron configuration ([Ar] 4s¹), requiring breaking into a filled shell.
3. C-C Bond:
Carbon-to-carbon bond energy differs based on bond type. Ethene (C₂H₄) has a stronger double bond, requiring more energy to break, while ethane (C₂H₆) has a weaker single bond.
4. Boiling Point:
Boiling points relate to intermolecular forces. Chlorine (Cl₂) has lower boiling point due to weaker dispersion forces compared to bromine (Br₂), with stronger dispersion forces leading to higher boiling point.
Learn more about atomic structure, here:
https://brainly.com/question/30547912
#SPJ12
does The Bohr model of the atom correctly predicts the energy levels of the hydrogen atom, which has a single electron.
Answer:False. The Bohr model correctly predicts energy levels of hydrogen and hydrogen-like atoms.
Explanation:
what happens to the particles of a solid as it becomes a liquid
Answer:
melting
Explanation:
Answer:
When a solid is heated the particles gain energy and start to vibrate faster and faster. ... Further heating provides more energy until the particles start to break free of the structure. Although the particles are still loosely connected they are able to move around. At this point the solid is melting to form a liquid.
Explanation:
what are the uses of the periodic table
Answer:
In today's world, the periodic table is very valuable for both students and scientists since it allows them to forecast the sorts of chemical reactions in which a specific element is likely to engage. Rather than memorizing facts and figures for each element, students and scientists can learn a great deal by simply looking at the table. They can learn about an element's reactivity, whether it is likely to conduct electricity, whether it is hard or soft, and many other characteristics by simply looking at the table.
Groups are made up of elements that are in the same column as one another and have attributes that are comparable to one another. If we look at the first column (the alkali metals), for example, we see that they are all metals that have a 1+ charge in reactions, react quickly with water and combine easily with nonmetals.
Periods are made up of elements that are arranged in a row next to one another and have the same maximum unexcited electron energy level as one another.
The periodic table also has the advantage of providing all the information you need to balance chemical processes at a glance, which is a very valuable feature. The atomic number and, in most cases, the atomic weight of each element are included in the table. The group of an element indicates the characteristic charge of that element.
Explanation:
why would someone need to find the relative density of an object?
Answer:
The relative densities of an object and the liquid it is placed in determine whether that object will sink or float. An object that has a higher density than the liquid it's in will sink. An object that has a lower density than the liquid it's in will float.
Explanation:
Hope it helps!
The relative densities of an object and the liquid it is placed in determine whether that object will sink or float. An object that has a higher density than the liquid it's in will sink. An object that has a lower density than the liquid it's in will float.
This principle is fundamental to understanding why objects float or sink in fluids and are commonly observed in everyday situations. For example, ships and boats float on water due to their design and the distribution of weight, while heavy materials like metal sink in water because their density is greater than that of water.
Therefore, The concept of relative densities and buoyancy has significant applications in various fields, including shipbuilding, architecture, swimming, and understanding the behavior of objects in liquids.
To know more about the density:
https://brainly.com/question/29775886
#SPJ3
The littoral zone is rich in nutrients
true or false
Answer:
false
Explanation:
how might rising atmospheric co2 concentrations lower the ph of the oceans?
Explanation:
As CO2 concentrations rise, excess CO2 is absorbed by the oceans. CO2 in the oceans can react chemically with water to form acid. ... The difference in pH units between two acidic solutions is three.
Which has more molecules?
A. 1 mole H2O
B. 1 mole Al(OH)3
C. 1 mole NaCl
D. There are all the same
Explanation:
1 mole H2OI hope it's helpful for you
1 mole of H₂O has more molecules than other compounds. The correct option is A.
What are molecules?
A molecule is a collection of two or more atoms held together by attractive forces known as chemical bonds.
The International System of Units uses the mole as the unit of material quantity. How many elementary entities of a specific substance are present in an object or sample is determined by its quantity.
The tiniest component of any substance is capable of existing independently while maintaining its chemical and physical properties and is composed of one or more elements.
Out of these molecules, water has more molecules than 1 mole Al(OH)₃ and 1 mole NaCl. They don't have the same number of moles.
Therefore, the correct option is A. 1 mole H₂O.
To learn more about moles, refer to the link:
https://brainly.com/question/26416088
#SPJ2
count the atoms in the following example
Need answer ASAP
Answer:
32 atoms.
Explanation:
4 x 2 = 8 +
4 x 3(O3) = 12 +
4 x 3(SO3) = 12; 32
Explain how food is transformed to energy for our bodies.
Which describes a molecule? (Select all that apply.)
It can be two or more different elements combined.
It can be two or more of the same elements combined together.
It can be one element by itself.
It can be the combination of different neutrons.
Answer:
All of them
Explanation: A molecule can be all of them
discussing the importance of the intelligence cycle in order to come up with intelligence
Answer:
Intelligence Analysis in a Cycle. Analysis resides within the larger intelligence cycle. The intelligence cycle determines the daily activities of the Intelligence Community. It starts with the needs of the intelligence "consumers' such as policymakers, military officials, and other decision makers who need intelligence for their activities.
Explanation:
can i get brainlist
Answer:
The Intelligence Community's daily activities are determined by the intelligence cycle. It begins with the requirements of intelligence "consumers," such as policymakers, military officials, and other decision-makers who require intelligence to carry out their tasks.
Explanation:
Hope it helps
What is defined as the amount of water vapor in the air?
Answer:
It is called absolute humidity.
Explanation:
Which action reflects irresponsible lab safety behavior?
which molecule or ion has a trigonal planar geometry around its central atom?
Answer:
Structure of boron trifluoride, an example of a molecule with trigonal planar geometry.
Explanation:
How does an electric generator work?
Answer:
A conductor coil (a copper coil tightly wound onto a metal core) is rotated rapidly between the poles of a horseshoe type magnet. ... The magnetic field will interfere with the electrons in the conductor to induce a flow of electric current inside it.
the first organisms to convert solar energy into chemical energy were most likely
First organisms to convert solar energy to chemical energy were the organisms which are called as cyanobacteria.
What is chemical energy?
Energy which is stored in the chemical bonds of chemical compounds is called chemical energy.Chemical energy is released during the occurrence of chemical reaction.Reactions wherein energy is given out in the form of heat is called exothermic reactions.
Chemical energy can be converted to other forms of energy like electrical energy during the process of electrolysis and to thermal energy as in the case of thermal engines.
It can also be converted to kinetic energy during explosions . It is stored in batteries, coal, biomass, food, vehicle air bags,etc.During digestion chemical energy is converted to mechanical and thermal energy.
Learn more about chemical energy,here:
https://brainly.com/question/1371184
#SPJ2
Which statement best describes the difference between a substance with a pH of 2.0 versus a substance with a pH of 4.0?
a
(1 point)
O The substance with a pH of 2.0 would have 100 times as many hydrogen ions per volume of water.
o The substance with a pH of 4.0 would have 100 times as many hydrogen ions per volume of water.
O The substance with a pH of 4.0 would have twice as many hydrogen ions per volume of water.
O The substance with a pH of 2.0 would have twice as many hydrogen ions per volume of water.
Answer:
The answer is the first one.
Explanation:
The lower a pH level the higher the the number hydrogen ions present in the acid's container.
ph = - log(H)
4 = - log(H)
- 4 = log(h)
10^-4 = H+
1 * 10^-4 = H +
ph = - log(H)
ph = 2
- 2 = log(H)
10^-2 = H
1*10^-2 = h
Something the power - 2 is 100 times greater than something with the power of -4
Answer:
the guy above is correct
Explanation:
explain why heating a solution increases the solubility of a solute
[tex] \: \: \: \: \: [/tex]
The addition of more heat facilitates the dissolving reaction by providing energy to break bonds in the solid. This is the most common situation where an increase in temperature produces an increase in solubility for solids.hope it helps[tex] \: \: \: \: \: \: [/tex]
who invented aeroplanes please tellme
Answer:
The Brazilian Santos Dumont
Explanation:
Santos Dumont created the 14 Bis airplane, the first airplane to perform a flight through 200 meters im Paris, France, in 23 October 1906
Orville and Wilbur Wright were the first two to actually invent the aeroplane. These American brothers also designed and flew their first creation after making it in their bicycle shop in December 17, 1903.
I hope this helps! :)