Answer:
The memory allocation algorithm that is used to place the processes given is the First Fit Algorithm
Explanation:
The First Fit Management Algorithm works by ensuring that the pointer keeps track of all the free spaces in the memory and accepts and executes all instructions to allocate a memory block to the coming process as long as it is big enough to hold the size of the process.
For example, the First Fit algorithm will allocate the processes in the first block that fits (that is, if it can fit the memory bock in the queue, then the process will be store)
It will work as follows (recall that the memory partitions are in order and must remain so):
A) 115 KB is stored in 300KB block, leaving the following free spaces (185KB, 600KB, 350KB, 200KB, 750KB, 125KB), next
B) 500 KB is store in a 600KB block leaving the following free spaces (185 KB, 100 KB, 350 KB, 200 KB, 750 KB, 125 KB), next
C) 358 KB is stored in 750KB block, leaving the following free spaces (185KB, 100KB, 350KB, 200KB, 392KB, 125KB) next
D) 200 KB is stored in 350KB block, leaving the following free spaces (185 KB, 100 KB, 150KB, 200KB, 392KB, 125KB) next
E) 375KB is stored in 392KB block leaving (185KB, 100KB, 150KB, 200KB, 17KB, 125KB)
One of the demerits of this Algorithm is that, as shown above, memory is not maximized. It however is one of the easiest algorithms amongst all the other memory allocation processes.
Cheers
An example of a _________________ impact is when a consumer wants to buy a product on the internet but is afraid the company won’t fulfill their request due to an unsure reputation of that business.
A)Negative
B)Positive
Answer:
ooof
Explanation:
Answer:
B) negative
Explanation:
the evidence shown "unsure reputation of that business"
which best explains the relationship among these three facts question 8
Answer:
no attachment
Explanation:
You are troubleshooting an issue where a PC can reach some hosts on the Internet (using either DNS name or IP address), while several other hosts on the Internet are not reachable. From the PC you can Ping all devices on your local subnet. What is most likely causing the problem?
The options are missing from the question,below are the options to choose from;
A) incorrect (or missing) routes in a routers routing table
B) incorrect DNS configuration on the PC
C) incorrect default gateway configuration on the PC
D) duplicate IP addresses on your LAN
Answer: The correct answer to the question is option A
INCORRECT (OR MISSING) ROUTES IN A ROUTERS ROUTING TABLE.
Explanation: When it is possible for a PC to ping some devices but not actually all,we can then make an assumption that either it has a wrong subnet that is configured or the router from the path to the remote device actually has an incorrect or a missing routes to the device.
Right now I have an i5 2400 and a PYN XLR8 gaming GTX 1650 Super, my CPU is too weak for 1080p gaming, what CPU should I get that has a B75 LGA 1155 socket, or Overclock it if so how many GHz should I overclock it to
(I only have a stock cooler)
Answer:
if its a number you need 5600GHz but im not to sure
Explanation:
Answer:
answer
Explanation:
if it a number you need 5600GHz but it not I'm not sure
What is the capacity of a disk with two platters, 10,000 cylinders, an average of 400 sectors per track, and 512 bytes per sector?
What is the use of cache memory? Explain the concepts of cache hit and cache miss.
Answer:
The capacity of the disk is "40 GB".
Explanation:
Given value:
[tex]\to \text{cylinder}= 10,000\\\\\to \frac{sector}{track} = 400\\\\\to \frac{bytes}{sector} = 512\\[/tex]
[tex]\text{Calculating the size of track} = \frac{bytes}{sector} \times \frac{sector}{track}[/tex]
[tex]= 512 \times 400 \\\\ = 204,800 \ \ Or \ \ 200 \ K[/tex]
[tex]\text{Calculating the size of surface} = \frac{byte}{track} \times \ cylinder[/tex]
[tex]= 2000 \ K \times 10,000 \\\\ = 20, 000,000 \ K[/tex]
[tex]\text{Calculating the capacity of a disk} = \frac{byte}{surface} \times \frac{surface}{disk}[/tex]
[tex]= 20, 000,000 \ K \times 2 \\\\ = 40, 000,000 \ K \\\\= 40 \ GB[/tex]
Cache memory is often used to speed up the runtime. It will enable us to improve performance unless we can store information, that is retrieved constantly in memory space.
Hit Cache: when the Processor relates to representing database data, Cache Hit results. Miss Cache: when this Processor responds to a non-present cache data, this will trigger its miss of cache.It doesn't have to retrieve the Main Memory through secondary storage.Help I’ll mark you brainly!
1. shapes
2. Shapes are classified and have a certain look. Forms are mostly organic and don't have a specific form.
3. value and depth
4. yellow, blue, red
5. orange, green, purple
6. opposite each other
7. right next to each other
9. tint-lightness shade - darkness
10. value
Have a great day!
~PumpkinSpice1
P.S.~ I take Digital arts so I know all the answers :) I just finished my color unit.
Using Python Write an expression using Boolean operators that prints "Special number" if special_num is -99, 0, or 44.
Sample output with input: 17
Not special number
special_num = int(input())
if special_num == -99 or special_num == 0 or special_num == 44:
print("Special number")
else:
print("Not special number")
I wrote the code so that the user enters a number of their choice. Best of luck.
How does natural gas move through pipelines from the well head to the end user thousands of miles away
Write a function that will sum all of the numbers in a list, ignoring the non-numbers. The function should takes one parameter: a list of values (value_list) of various types. The recommended approach for this:
a. create a variable to hold the current sum and initialize it to zero.
b. use a for loop to process each element of the list.
c. test each element to see if it is an integer or a float, and, if so, add its value to the current sum.
d. return the sum at the end.
In python 3.8:
def func(value_list):
lst = [x for x in value_list if type(x) == int or type(x) == float]
return sum(lst)
print(func(["h", "w", 32, 342.23, 'j']))
This is one solution using list comprehensions. I prefer this route because the code is concise.
def func(value_list):
total = 0
for x in value_list:
if type(x) == int or type(x) == float:
total += x
return total
print(func(["h", "w", 32, 342.23, 'j']))
This is the way as described in your problem.
Martin is responsible for translating the script into a visual form by creating a storyboard. Which role is he playing?
Martin is playing the role of a(n)
Answer:
The correct answer to this question is given below in the explanation section.
Explanation:
The question is about to identify the role of Martin, who converts script into visual form by creating a storyboard.
The correct answer to this question is:
Martin is playing the role of Production Design and he is working at the position of the production designer.
Before shooting a film, the production designer is the first artist who converts script into a visual form such as creating storyboards. And, that storyboard serves as the first film draft.
A storyboard is a series of sketches, paintings, etc arranged on a panel to show the visual progress of the story from one scene to the next. These storyboards are used from start to finish of the film. Because these storyboards or sketches serve as the visual guide for the director of the film throughout the production.
Answer:
Hi
Explanation:
THE ANSWER UP TOP IS WRONG LIKE DEAD WRONG
PLS HELP IN WHATEVER WAY YOU CAN ASAP
the company's Chief Financial Officer recognizes the need for an upgrade to the smart watches but does not understand why the budget proposed request more than the purchase price of the update software how would you respond to this
Answer:
what ever way I can you say
I would respond by explaining that the price may go up or down before we buy them and that it is good to have some wiggle room with the cost. I would also mention that any unused money will come right back and that it is just a precaution.
a good look of a web page depends upon?
Answer:
Depends mostly on your opinion
What is the difference between a spreadsheet and word processing software?
Only one can calculate numeric data.
Only one can display graphs and charts.
Only one can organize data.
Only one can present text and numeric data.
Answer:
Only one can calculate numeric data.
Explanation:
Both spreadsheet and word processing software can display graphs and chats.
Both spreadsheet and word processing software can organize data through cells and tables respectively.
Both spreadsheet and word processing software can present text and numeric data.
Answer:
Only one can calculate numeric data.
Explanation:
Which is a conditional statement?
If it is sunny, we can play ball.
It is sunny today.
It is sunny or rainy.
It is sunny across the street, but not sunny here.
Answer:
it is 1, I know this because i got 100% on my quiz
Explanation:
Looking at the response vehicles (pictured above), explain two options you have in order to abide by the Move Over law,
Answer: two options I have in order to abide by the move over law is to either move over or slow down. You must move over a lane away from stationary emergency vehicles if it is safe to do so. If it is not safe to do so then the driver must proceed with due caution, with a safe speed for road conditions.Until the driver has passed the emergency vehicle.
Explanation:Let me know if this helped! (:
Answer:
two possible options in order to abide by the move over law would be to either move over to a different lane (one lane away or more) or slow down.
Explanation:
Suppose that one of the following control signals in the single-cycle MIPS processor has a stuck-at-0 fault, meaning that the signal is always O, regardless of its intended value. What instructions would malfunction? Why? (a) RegWrite (b) ALUOp1 (c) MemWrite Repeat for all three signals (a) to (c) above, assuming that the signal has a stuck-at-1 fault.
Answer:
Explanation:
RegWrite:
• All R-type instructions, lw and addi:
• The result of the operation/load/addition would not be written back to the destination register
• ALUOP
• The following R-type instructions: add, sub, and, or, slt
• With ALUOp stuck at 0, the ALU decoder would interpret all those instructions as either add or subtract operations. The ALUOp gets decoded to add or subtract depending on ALUOp[0].
• MemWrite:
• Only sw is affected.
• The memory write won’t take place.
Range is an example of a ______________.
Answer:
example in ( 4,6,9,3,7) lowest value is 3and highest is 9.
write a C++ program that ask the user for the number of cookies eaten and display the calorie consumption
Answer:
#include <iostream>
using namespace std;
int main()
{
int cookies;
cin >> cookies;
cout << "The calorie consumption is: " << cookies * 142 << endl;
return 0;
}
Explanation:
First line: include basic library of C++(input and output).
using namespace std;
Says to compiler we are using std.
int main() Main function
int cookies, cookies variable, of int type
cin >> cookies
get the number of the cookies from user
cout Print the text and calories(one cookie have 142 calories)
Have a nice day ;)
Which of these is a valid use of the Reply All feature?
correcting someone's spelling mistake in an e-mail
responding with "I agree" or "me too"
responding with "please take me off your list"
none of these
Answer:
I think is None of this ,
According to the options given none of these is a valid use of the Reply All feature. Thus, option D is correct.
What is the use of auto-responder?If you use an auto-responder, all your customers will receive a standardized reply. That will make it clear for them that their message has not been read yet. However, even if your message states that you will eventually read and respond properly to every single email.
It is likely that customers will doubt it. They do not expect an automatic response upon contacting you - quite the contrary, they expect their issues to be addressed specifically and immediately.
An email message is a text that is transmitted or received over a computer network and is often short and casual. Email communications are often only text messages, but they can also contain attachments (such spreadsheets and graphic files). Multiple people can receive an email message at once.
Therefore, According to the options given none of these is a valid use of the Reply All feature. Thus, option D is correct.
Learn more about Email communications on:
https://brainly.com/question/30262540
#SPJ3
While working on a customer issue, your colleague calls and asks for help to resolve his issue. What should you do?A. Go ahead and resolve his situation first B. Request the colleague to call after sometime C. Work on both the issues at the same time D. Tell your colleague to work on his own.
Answer:
Request the colleague to call after sometime
Explanation:
While working on a customer issue, your colleague calls and asks for help to resolve his issue. What should be done is to "Request the colleague to call after some time."
This is because,e in situations like that, it is believed that the customer should come first, and that is the purpose of being there. For employee to serve the customer. A colleague can easily link up with other employees to get his issues sorted, or simply wait.
a document contains a list of items that appear in no particular order. what is the best way to format the list
Answer:
bulleted list
Explanation:
Bulleted list is the best way to format the list. As a document contains a list of items that appear in no particular order.
What is meant by Bulleted list?A bullet list is simply a list of items with dotted dots separating each item and a heading at the top. These lists are flexible and may be used for whatever you need them for, from something as informal as an agenda to something as serious as a business strategy for your place of business.
A bullet list is used when making a list of two or more items, where the order of the items is not important. A retailer may display a list of items you want to buy in the form of a bullet list, for example.
Use a number list if you're composing a list of actions or instructions when the order is important.
Thus, it is Bulleted list.
For more details about Bulleted list, click here:
https://brainly.com/question/17359798
#SPJ2
In order to make schemas that will appear in the Schema Library available in the XML Options dialog box, what file extension should a user give to schemas?
--.xml
--.xsl
--.xslt
--.xsd
Answer:
You can use your XML parser
Explanation:
hope this helps!
The single-cycle datapath conceptually described in this section must have separate instruction and data memories, because:________. a. the formats of data and instructions are diff erent in MIPS, and hence different memories are needed. b. having separate memories is less expensive. c. the processor operates in one cycle and cannot use a single-ported memory for two different accesses within that cycled. the formats of data and instructions are different in MIPS, and hence different R-type instructions are needed .
Answer:
C. The processor operates in one cycle and cannot use a single-ported memory for two different accesses within that cycle
Explanation:
Processors require instructions and data which are retrieved from data memories for processing, but it cannot access two or receive two both processes as only a port is used for accessing data and another for receiving instructions. In fact, a single-cycle or single-clock processor cannot use a resource more than once.
What is the definition of trouble shooting.
Which traits are common in all four career pathways of the Information Technology field? Check all that apply.
A)accuracy and attention to detail
B)problem-solving and critical-thinking skills
C)knowledge of programming language
D)ability to work independently
E)ability to protect confidential information
F)ability to learn quickly
Answer:
Abcd
Explanation:
_decisions are more common at lower organizational levels
Which of the following is not a characteristic of a structured decision?
The first three phases of the decision-making process need not occur in any particular sequence.
Structured
________ decisions are more common at lower organizational levels.
Operational control
_____ is the efficient and effective execution of specific tasks.
unstructured
When there is no well-understood or agreed-on procedure for making a decision, the decision is said to be:
Users didn't have the right tools to access the data.
Refer to the Opening Case - Quality Assurance at Daimler AG: Which of the following best describes Daimler's Quality Information System (QUIS)?
digital dashboards
Which of the following information systems are very user friendly, supported by graphics, and provide exception reporting and drill down?
The number of alternatives is decreasing.
Which of the following is not a reason why managers need IT support?
implementation
Success in the _____ phase of the decision-making process results in resolving the original problem, and failure leads to a return to previous phases.
interpersonal
Being a figurehead and leader is part of the _____ managerial role.
Write a function that converts a string into an int. Assume the int is between 10 and 99. Do not use the atoi() or the stoi() function.
Answer:
Written in C++
#include <iostream>
#include <sstream>
using namespace std;
int main() {
string num;
cout<<"Enter a number: ";
cin>>num;
stringstream sstream(num);
int convertnum = 0;
sstream >> convertnum;
cout << "Output: " << convertnum;
}
Explanation:
Without using atoi() or stoi(), we can make use of a string stream and this is explained as follows:
This line declares a string variable num
string num;
This line prompts user for input
cout<<"Enter a number: ";
This line gets user input
cin>>num;
This line declares a string stream variable, sstream
stringstream sstream(num);
This line declares and initializes the output variable, convertnum to 0
int convertnum = 0;
The stream is passed into the output variable, convertnum
sstream >> convertnum;
This line displays the output
cout << "Output: " << convertnum;
Note that: if user enters a non integer character such as (alphabet, etc), only the integer part will be convert.
For instance,
40a will be outputted as 40
What is output?
C = 1
sum - 0
while (c < 10):
c = c + 3
sum = sum + c
print (sum)
Explanation:
Please make me BrainliestI have put the question in twice and I cannot get a answer for it .. this site isn’t great in my view..
Please help I don’t know
Answer: Go down 1 time, then to the left 3 times, then down 1, finally, go left 1 time.
Explanation: