the element with atomic number 35 belongs to
What type(s) of intermolecular forces are expected between SO3 molecules? ball & stick -+labels Indicate with a Y (yes) or an N (no) which apply. dipole forces ___ induced dipole forces ___ hydrogen bonding ___
Answer:
dipole forces Y
induced dipole forces N
hydrogen bonding N
Explanation:
Oxygen is highly electronegative than sulphur, hence SO3 is polar
8. Which of the following elemental gases would have properties closest to an ideal gas?
a. hydrogen
argon
b. helium
d. fluorine
Answer:
Helium
Explanation:
Please tell me if it was right
Which of the following is NOT true regarding sexual reproduction?
It requires only one parent.
It requires only one parent.
Offspring show genetic variability.
It produces few offspring.
Answer:
I believe it would need more then one parent so therefore the wrong answer would be It requires only one parent
Explanation:
HELPP ASAP I WILL MARK BRAINIST
Answer:
I'm thinking ethier D or A
Explanation:
PLZ HELP *NO LINKS*
1) How many moles of gaseous arsine (AsH3) occupy 0.372 L at STP?
In sig fig 4
2) What is the density of gaseous arsine?
In sig fig 4
Thanks!
Answer: (1). There are 0.0165 moles of gaseous arsine (AsH3) occupy 0.372 L at STP.
(2). The density of gaseous arsine is 3.45 g/L.
Explanation:
1). At STP the pressure is 1 atm and temperature is 273.15 K. So, using the ideal gas equation number of moles are calculated as follows.
PV = nRT
where,
P = pressure
V = volume
n = number of moles
R = gas constant = 0.0821 L atm/mol K
T = temperature
Substitute the values into above formula as follows.
[tex]PV = nRT\\1 atm \times 0.372 L = n \times 0.0821 L atm/mol K \times 273.15 K\\n = 0.0165 mol[/tex]
2). As number of moles are also equal to mass of a substance divided by its molar mass.
So, number of moles of Arsine [tex](AsH_{3})[/tex] (molar mass = 77.95 g/mol) is as follows.
[tex]No. of moles = \frac{mass}{molar mass}\\0.0165 mol = \frac{mass}{77.95 g/mol}\\mass = 1.286 g[/tex]
Density is the mass of substance divided by its volume. Hence, density of arsine is calculated as follows.
[tex]Density = \frac{mass}{volume}\\= \frac{1.286 g}{0.372 L}\\= 3.45 g/L[/tex]
Thus, we can conclude that 0.0165 moles of gaseous arsine (AsH3) occupy 0.372 L at STP and the density of gaseous arsine is 3.45 g/L.
Which of the following regions has an economy based on processing food and consumer goods?
A. Western Europe
B. Eastern Europe
C. northern Europe
D. southern Europe
No links plz
Answer:
B. Eastern Europe
Explanation:
The economy of Eastern Europe depends on producing foods. For example, Poland and Belarus are two countries in Eastern Europe, and they both produce chocolates. Producing foods isn't the only detrimental part of the region's economic data. The other half depends on consumer goods. For example, Estonia and Latvia are good countries in packaging food. The answer to the question is B.
A sample of polonium-210 has an initial mass of 390 milligrams (mg). If the half-life of polonium-210 is 36 days, how many mg of the sample remains after 36 days?
A.
48.75 mg
B.
392 mg
C.
97.5 mg
D.
195 mg
Answer:
d
Explanation:
Mg + HCl -> MgCl2 + H2
When the equation is balanced what should the coefficient for magnesium chloride be
Explanation:
hope it helps you
have a good day please mark me as brain list ☺️ sorry for picture
Submit your one paragraph essay about disability insurance
Answer:
Disability insurance is financial protection for your most valuable asset — the ability to work and earn an income. So why is it so commonly overlooked and misunderstood?
Homeowners insurance protects where you live. Car insurance protects what you drive. Health insurance protects your well-being.
But what protects your ability to work and earn an income? After all, that's what allows you to pay for all of the above.
To protect yourself against the risk of losing your paycheck due to injury or illness, there's disability insurance. In this article, we cover everything you need to know about this important, yet often overlooked type of insurance for your income.
Disability insurance definition
Disability insurance is a type of coverage that replaces a portion of your monthly income if injury or illness prevents you from working. It provides financial security for you and any loved ones who may depend on your most valuable asset — your ability to earn a paycheck. You may also hear disability insurance referred to as disability income insurance or income protection.
Explanation:
8. Is specific heat an intensive or extensive property?
(will give brainlist)
Answer:
Explanation:
A specific property is the intensive property obtained by dividing an extensive property of a system by its mass. For example, heat capacity is an extensive property of a system. Dividing heat capacity, , which is an intensive property.
hope it helps :)
Explanation:
Is specific heat an intensive or extensive property?
intensive propertyState the methods of preparing salts
Answer:
Preparation of Salts by The Action of An Acid Upon a Metal.
Preparation of Salts by Double Decomposition.
Preparation of Salts by Neutralization.
Using A Soluble Base (alkali)
(b). Using An Insoluble Base.
Preparation of Salts by the Action of An Acid on The Trioxocarbonate (IV) of A Metal.
Explanation:
4. Calculate the final temperature of 75.4 g water originally at 12.6 °C after it absorbs 3.85 kcal
of heat.
Answer:
63.7 °C
Explanation:
Step 1: Given and required data
Mass of water (m): 75.4 gInitial temperature (T₁): 12.6 °CAbsorbed heat (Q): 3.85 kcalSpecific heat capacity of water (c): 1 cal/g.°CStep 2: Calculate the final temperature of the water (T₂)
We will use the following expression.
Q = c × m × (T₂ - T₁)
T₂ = Q/c × m + T₁
T₂ = 3.85 × 10³ cal/(1 cal/g.°C) × 75.4 g + 12.6 °C = 63.7 °C
Lattice energy is Question 4 options: the energy given off when gaseous ions combine to form one mole of an ionic solid the energy required to convert a mole of ionic solid into its constituent ions in the gas phase the energy required to produce one mole of an ionic compound from its constituent elements in their standard states the sum of ionization energies of the components in an ionic solid the sum of electron affinities of the components in an ionic solid
Answer:
Lattice energy is the energy required to convert a mole of ionic solid into its constituent ions in the gas phase
Explanation:
Lattice energy is usually calculated by the Born-Haber cycle, from the affinity energies and sublimation ethalphy values. It is used as an estimation of the ionic energy strength between the ions in an ionic compound.
It is defined as the energy needed to broke 1 mol of a given ionic compound into its ions in the gaseous state. For example, the lattice energy for sodium chloride (NaCl) is the energy required to separate 1 mol of solid ionic compound (NaCl(s)) and produce the sodium and chlorine ions in the gas phase: Na⁺(g) and Cl⁻(g).
How do children use food molecules to grow taller?
Options
A - Children grow taller when they use food molecules they eat to build large molecules that make up new cells.
B - Children grow taller when they use the food molecules they eat to make up new cells without changing the food molecules.
C - Children grow taller when they use the energy from the food molecules, but all of the molecules leave the body as waste.
D- Children grow taller when they store food molecules as fat.
A or B or C Or D ?
Answer:
C) Children grow taller when they use the energy from the food molecule, but all of the molecules leave the body as waste.
hope it helps.
Answer:
C - Children grow taller when they use the energy from the food molecules, but all of the molecules leave the body as waste.
hope it is helpful to you ☺️☺️☺️☺️
what is the definition for domain bacteria?
Answer:
Domain is the............. highest taxonomic rank in the hierarchical biological classification system, ........above the kingdom level. There are three domains of life, the Archaea, the Bacteria,,,,,,,,, and the Eucarya.
Reword, taken off the internet.
Explanation:
Use the crisscross method to find the chemical formula for the ionic compound formed by aluminum (Al) and sulfur (S). A. Al₂S2 B. AlzS3 C. Al3S2 D. Als
Answer:Al2s3
Explanation:
Just took quiz
What happens at the cathode in an electrolytic cell?
A. Oxidation
B. Turning an ion into an uncharged atom
C. Melting
D. Reduction
Answer:
D. Reduction
Explanation:
In the electrolytic cell, reduction occurs at the cathode
The city council of Centerville pass a law requiring all new buildings to be outfitted with low-flow toilets instead of regular toilets. The low-flow toilets use approximately 2 less gallons of water per flush. What will be the most likely effect of this new law?
A.
increase in the habitat size for the area's wildlife
B.
decrease in the amount of acid rain falling in the area
C.
pollution of the local groundwater
D.
conservation of local freshwater supplies
Answer:
probably b
Explanation:
a) How do you prepare %3 (w/v) Na2CO3 solution from Na2CO3⸱2H2O? (15p) Na2CO3 MW=106 g/mol
Answer:
4.02g of Na2CO3⸱2H2O must be added completing the volume of the solution to 100mL
Explanation:
A 3%(w/v) solution contains 3g of solute (In this case, Na2CO3) in 100mL of solution.
Assuming we require 100mL of solution we must add 3g of Na2CO3. The reactant that is available is its dihydrate, with molar mass:
106g/mol + 2*MW H2O
106g/mol + 2*18g/mol = 142g/mol
That means the mass of Na2CO3.2H2O that must be added to prepare the solution is:
3g Na2CO3 * (142g/mol Na2CO3.2H2O / 106g/mol Na2CO3) =
4.02g of Na2CO3⸱2H2O must be added completing the volume of the solution to 100mLWhich statement best defines the term innate behavior?
behavior that is taught through watching others
behavior that is simple, untaught, and born knowing
behavior that is taught through both good and bad experiences
behavior that is untaught but very complex
Answer: behavior that is simple, untaught, and born knowing
Have a nice dam day!!
The term that describes innate behavior is:
D. behavior that is untaught but very complex
What does innate behavior stand for?Intr-insic or "intuitive" ways of behaving are innate and don't need learning or related knowledge to be performed. Models incorporate romance and ways of behaving, departure and guarded moves, and hostility. Movement and Migration Innate or ins-tinctual behaviors rely on response to sti-muli.
Thus, option D is correct.
Find more information about Innate behavior here:
brainly.com/question/14311636
1. Density is the measure of how much
volume ?????? is contained in a given volume
Explanation:
Density is the mass of an object divided by its volume. Density often has units of grams per cubic centimeter (g/cm3). Remember, grams is a mass and cubic centimeters is a volume (the same volume as 1 milliliter).
You can follow me to get more answer.
If a substance has a density of 0.123 g/mL, 10.0 dL would weigh in g?
Answer:
123 g
Explanation:
First, we convert 10.0 dL into mL, keeping in mind that:
1 dL = 100 mL; then10.0 dL * 100 = 1000 mLNow we can multiply the density by the volume in order to calculate the mass:
Density = mass / volumeDensity * volume = mass0.123 g/mL * 1000 mL = 123 g10.0 dL of a substance with a density of 0.123 g/mL would weigh 123 grams.
lonic bonding can only occur between which two types of elements
a
Metal and metal
b
non metal and non metal
c
metal and non metal
d
none of the above
Answer:
C.
Explanation:
An ionic bond is a type of chemical bond formed through an electrostatic attraction between two oppositely charged ions. Ionic bonds are formed between a cation, which is usually a metal, and an anion, which is usually a nonmetal. A covalent bond involves a pair of electrons being shared between atoms.
4 NH3 (g) + 7 O2 (g) 4 NO2 (g) + 6 H2O (g)
The combustion of 28.8 g of ammonia consumes __________ g of oxygen.
Answer:
21
Explanation:
A balloon at -73C with 5L of gas is heated to 400K. If the pressure ranges from 101.3 kPa to 1520 torr; What will be the final volumn
Answer: The final volume will be 2.89 L.
Explanation:
Given: [tex]T_{1} = 73^{o}C = (73 + 273) K = 346 K[/tex], [tex]V_{1} = 5L[/tex], [tex]T_{1} = 400 K[/tex]
[tex]P_{1}[/tex] = 101.3 kPa
Convert kPa to atm as follows.
[tex]1 kPa = 0.00986923\\101.3 kPa = 101.3 kPa \times \frac{0.00986923 atm}{1 kPa}\\= 0.99 atm\\= 1 atm[/tex]
[tex]P_{2}[/tex] = 1520 torr
Convert torr into atm as follows.
[tex]1 torr = 0.00131579 atm\\1520 torr = 1520 torr \times \frac{0.00131579 atm}{1 torr}\\= 2 atm[/tex]
Formula used to calculate final temperature is as follows.
[tex]\frac{P_{1}V_{1}}{T_{1}} = \frac{P_{2}V_{2}}{T_{2}}[/tex]
Substitute the values into above formula as follows.
[tex]\frac{P_{1}V_{1}}{T_{1}} = \frac{P_{2}V_{2}}{T_{2}}\\\frac{1 atm \times 5 L}{346 K} = \frac{2 atm \times V_{2}}{400 K}\\V_{2} = 2.89 L[/tex]
Thus, we can conclude that the final volume will be 2.89 L.
Which molecule contains a nonpolar covalent bond?
A. HCI
B. F2
C. CO2
D. NH3
What does putting on the sweater, even though it isn’t hers, reveal about Rachel?
She sticks up for herself when she knows she is right.
She will do what she is told, especially when facing conflict.
She can be talked into liking something that she does not like.
Answer:
B: She will do what she is told, especially when facing conflict
Explanation:
I know it cause I'm doing it rn and I got it right
If 36.0 g of NaOH (MM = 40.00 g/mol) are added to a 500.0 mL volumetric flask, and water is added to fill the flask, what is the concentration of NaOH in the resulting solution
Answer:
Molarity of NaOH = 1.8 M.
Explanation:
From the question given above, the following data were obtained:
Mass of NaOH = 36 g
Molar mass of NaOH = 40 g/mol
Volume = 500 mL
Molarity of NaOH =?
Next, we shall determine the number of mole in 36 g of NaOH. This can be obtained as follow:
Mass of NaOH = 36 g
Molar mass of NaOH = 40 g/mol
Mole of NaOH =?
Mole = mass / molar mass
Mole of NaOH = 36 / 40
Mole of NaOH = 0.9 mole
Next, we shall convert 500 mL to L. This can be obtained as follow:
1000 mL = 1 L
Therefore,
500 mL = 500 mL × 1 L / 1000 mL
500 mL = 0.5 L
Finally, we shall determine the molarity of NaOH. This can be obtained as follow:
Mole of NaOH = 0.9 mole
Volume = 0.5 L
Molarity of NaOH =?
Molarity = mole / Volume
Molarity of NaOH = 0.9 / 0.5
Molarity of NaOH = 1.8 M
What mass or iron is needed to react with 30.0g of oxygen? Could you show me how you got that answer?
Answer:
The mass of iron needed to react with the oxygen is 70 g.
Explanation:
The balanced chemical reaction between iron and oxygen is given as;
4Fe + 3O₂ ----------> 2Fe₂O₃
Molecular mass of 3O₂: 3(16 x 2) = 96 g
Molecular mass of 4Fe: 4(56) = 224 g
96 g of O₂ ---requires--------> 224 g of Fe
30 g of O₂ -------requires--------->? Fe
= (30 x 224) / 96
= 70 g
Therefore, the mass of iron needed to react with the oxygen is 70 g.