General kinematics problem.

"Anna is returning from vacation driving down the Sunshine Highway. She travels for a stretch (SA) at a speed of 110 km/h. Then, due to an increase in traffic, Anna is forced to reduce her speed by travelling the second part of the journey (SB) at 60 km/h. The total distance and duration of the trip are 350 km and 4.0 hours respectively.
-> Calculate the time intervals needed to travel SA and SB
-> Calculate the distances covered in the two sections SA and SB".

The results I should get by doing the exercise are in the attached picture.

If you could explain the various steps in the problem you would be doing me a huge favor. Thanks!​

Answer: A

Explanation: An object in free fall only is affected by gravity, so the acceleration is 9.8 m/s²

Answer:it was lifted

Explanation:

by me lifting it because i can life it very high

Answer:

the answer is the rollar coster

Explanation:

because the rollar coster is

The specific heat capacity of tungsten given the data from the question is 0.17 J/gºC

Mass of tungsten (M) = 100 g

Temperature of tungsten (T) = 100 °C

Mass of water (Mᵥᵥ) = 200 g

Temperature warm water (Tᵥᵥ) = 20 °C

Specific heat capacity of the water (Cᵥᵥ) = 4.184 J/gºC

Equilibrium temperature (Tₑ) = 21.6 °C

Specific heat capacity of tungsten (C) = ?

Heat loss = Heat gain

MC(T – Tₑ) = MᵥᵥCᵥᵥ(Tₑ – Tᵥᵥ)

100 × C × (100 – 21.6) = 200 × 4.184(21.6 – 20)

100 × C × 78.4 = 1338.88

Divide both sides by 100 × 78.4

C = 1338.88 / (100 × 78.4 )

C = 0.17 J/gºC

Learn more about heat transfer:

brainly.com/question/6363778

#SPJ2

Answer:

D

Explanation:

Answer:

112.36 pounds

Explanation:

Since 1 pound = 4.45 Newtons, a 500N child in pounds = 500÷4.45 = 112.36 pounds (approximately).

Answer:

69 meters

Explanation:

Explanation:

As you can see in the picture, we want the swimmer to go on a straight line, so the speed of the water must be equal to the speed of the swimmer along the x-axis. We also know the value of v, so we can calculate the of the cosine of the angle (alpha) between Vx and V. Thanks to the fundamental relation of gioniometry (cos^2(x) + sin^2(x) = 1) we can find the sine of alpha and calculate Vy. With Vy we can calculate the time that the swimmer will use for reaching the dock: s = Vy * t => t = s/(Vy).

I'll let you do all the calculations, you just have to plug in values.

a)The direction that she must aim herself through the water to arrive at the dock will be 73.7°.

b)The time it takes for the swimmer to cross the river will be 240 seconds.

Speed is defined as the rate of change of the distance or the height attained. it is a time-based quantity. it is denoted by u for the initial speed while v for the final speed. its si unit is m/sec.

Given data;

The maximum speed of the swimmer In still water,v=1.25m/s.

Speed of river = 0.35m/s [E]

α is the direction that she must aim herself through the water to arrive at the dock.

t is the time it takes for the swimmer to cross the river

The distance from the starting point to the dock is,s = 300 m

If the swimmer were to swim straight, the water's speed along the x-axis would have to match that of the swimmer.

[tex]\rm v_w = v_x = 0.35 \ m/sec[/tex]

α is the angle between vx and v

The value of the

[tex]\rm cos \alpha = \frac{v_x}{v} \\\\ \alpha = cos ^{-1}(\frac{0.35}{1.25} )\\\\ \alpha = 73.7 ^0[/tex]

The time that the swimmer will use for reaching the dock;

s = V×t

t = s/(v)

t=300 m / 1.25 m/sec

t = 240 seconds

Hence, the direction that she must aim herself through the water to arrive at the dock. and it takes for the swimmer to cross the river will be 73.7° and 240 seconds respectively.

To learn more about the speed refer to the link;

https://brainly.com/question/7359669

#SPJ2

Answer:

Let L be the length of the wire.

N λ = M L      where N is the number of wavelengths λ. Also, M and are integers and L is the length of the wire

There must be nodes at the ends of the wire and anti-nodes at the points of zero displacement - λ/2, λ, 3λ/ 2, etc.

The simplest would be 2 λ = L   or L = λ / 2

In such a situation one would have

N-A-N    or node-antinode-node

There is a 180 degree phase change upon reflection of the wave creating the standing wave

The distance between nodes or anti-nodes must be λ/2 and there must  be nodes at the ends of the wire

Answer:

concave lens focal length 2m

The pendulum bob slow down and eventually stop as it loses it energy due to friction or air resistance. All its kinetic energy has been transformed to potential energy. None of the options is correct

The to and fro movement of an object or particle is known as oscillatory motion. Such motion repeats itself. Examples are;

The given diagram shows a swinging pendulum. And the option which best explains what happens to the motion of the pendulum due to the law of conservation of energy is

The pendulum will slow down and eventually stop moving when it loses energy because of friction or air resistance as the kinetic energy transforms to potential energy

The mechanical energy involve are potential and kinetic energy. Both energies reduce as they gradually lost some of their energies due to air friction between the bob and the air. Some of the lost energies may be transformed to thermal energy.

The pendulum bob slow down and eventually stop because it loses its mechanical energy due to air resistance or friction.

Therefore, the option A which state that "The pendulum will slow down and eventually stop moving as the mechanical energy transforms to thermal energy" can be considered. But none of the option best explain what happens to the motion of the pendulum.

Learn more about Oscillatory Motion here; https://brainly.com/question/17315536

Answer:

Below in bold.

Explanation:

Newton's Second Law:

Force = mass * acceleration

So

Force = 24.5 * 2.3

= 56.35 Newtons.

Momentum is conserved, so

(2 kg) (50 m/s) + (4 kg) (-25 m/s) = (2 kg) v₁' + (4 kg) v₂'

where v₁' and v₂' are the velocities of the two blocks after the collision. Simplifying this gives

100 kg•m/s - 100 kg•m/s = (2 kg) v₁' + (4 kg) v₂'

0 = (2 kg) v₁' + (4 kg) v₂'

v₁' = -2v₂'

Energy is also conserved, so

1/2 (2 kg) (50 m/s)² + 1/2 (4 kg) (-25 m/s)² = 1/2 (2 kg) (v₁')² + 1/2 (4 kg) (v₂')²

Simplifying yields

2500 J + 1250 J = (1 kg) (v₁')² + (2 kg) (v₂')²

3750 J = (1 kg) (v₁')² + (2 kg) (v₂')²

Substitute v₁' = -2v₂' and solve for v₂' :

3750 J = (1 kg) (-2v₂')² + (2 kg) (v₂')²

3750 J = (6 kg) (v₂')²

(v₂')² = 625 J/kg = 625 m²/s²

v₂' = 25 m/s

Then the first block has final velocity

v₁' = -2 (25 m/s)

v₁' = -50 m/s

Answer:

The light year is used to measure distances in space because the distances are so big that a large unit of distance is required.

Gravitational force is responsible for how magma flows and rocks stack up on top of one another.

Hence, it is the gravitational force that is responsible for how magma flows and rocks stack up on top of one another.

Learn more about gravitational force: https://brainly.com/question/24783651

We are given –

Sun, r= 1.5×10¹¹ m

We are asked to find the gravitational attraction between the sun and the earth.

[tex]\qquad[/tex] [tex]\pink{\twoheadrightarrow\sf F = \dfrac{GMm}{r²}}[/tex]

Substituting values, we get –

[tex]\qquad[/tex] [tex]\twoheadrightarrow\bf F = \dfrac{6.67×10^{-11}\times 5.98×10^{24}\times 1.99×10^{30}}{(1.5×10^{11})^2}[/tex]

[tex]\qquad[/tex] [tex]\twoheadrightarrow\bf F = \dfrac{6.67×10^{-11}×5.98×10^{24}×1.99×10^{30}}{2.25×10^{22}}[/tex]

[tex]\qquad[/tex] [tex]\twoheadrightarrow\bf F = 35.27×10^{21}[/tex]

[tex]\qquad[/tex] [tex]\pink{\twoheadrightarrow\bf F = 3.53×10^{22} N}[/tex]

______________________________________________

Answer:

gravity

Explanation:

keeps the ball down on the surface

When dribbling a ball, the gravity should control the direction and downward motion of the ball.

When a particle is hurled obliquely near the surface of the earth, it travels along a curved path while accelerating continuously in the direction of the planet's centre (we assume the particle stays close to the surface of the globe). Such a particle's motion is known as projectile motion, and its route is referred to as a projectile.

Two distinct rectilinear motions occur simultaneously in a projectile motion:

When a ball is sent into the air at a certain speed, the only force acting on it is the acceleration caused by gravity (g).

Learn more about projectile motion here:

https://brainly.com/question/11049671

#SPJ2

Answer:

hi there !

1 hour -------> 620 miles

3 1/2 ---------> ?

the number of miles the airplane travels in 3 1/2 hours

= 3 1/2 × 620 = "2170" miles

Answer:

18:equilibrium

19:10.8

20:separating the surfaces with a layer of air

21:it remains motionless

22:cm/s

Answer: 300N

Explanation:

Impulse= Mass * Velocity

F.T = M * V

F= MV/T

F= (0.15*20)/ 0.01

F= 300N

Answer:

A.synrhesis reaction

#carryonlearning

Answer: The correct answer is the weight of the wood.

Explanation:

Hope this helps

Answer:

Hello There!

It is Speed.

[tex]\Large\bold\red{Reason}[/tex]

Because in the question it is said that at which speed car is travelling.

Speed is a scalar quantity.

If it is velocity then first know this that it is a vector quantity.

It must include both magnitude and direction.

If it is velocity then it would be 40 mph east or west or north or south.

The new gravitational force of the two objects will be 432 N.

The given parameters:

The gravitational force between the two objects is calculated by applying Newton's law of universal gravitation;

[tex]F = \frac{Gm_1m_2}{r^2} \\\\G = \frac{Fr^2}{m_1m_2}\\\\G = \frac{Gm_1m_2}{r^2} \\\\G = \frac{18r^2}{m_1m_2}[/tex]

[tex]\frac{18r^2}{m_1 m_2 } = \frac{F_2(\frac{1}{2}r)^2 }{2m_1 \times 3m_2} \\\\\frac{18r^2}{m_1 m_2 } = \frac{F_2 \times r^2}{4 \times 2m_1 \times 3m_2} \\\\\frac{18r^2\times 4 \times 2m_1 \times 3m_2}{m_1 m_2\times r^2 } = F_2\\\\432 \ N = F_2[/tex]

Thus, the new gravitational force of the two objects will be 432 N.

Learn more about Newton's law of universal gravitation here: https://brainly.com/question/9373839