A power station works in terms of energy transfers by the process of Fuel Combustion, Steam Generation, Steam Turbine, Generator, Electrical Transmission and Distribution and Consumption.
A power station is a facility that generates electricity by converting various forms of energy into electrical energy. The overall process involves several energy transfers. Here is a description of how a typical power station works:
1. Fuel Combustion: The power station burns fossil fuels like coal, oil, or natural gas in a boiler. The combustion of these fuels releases thermal energy.
2. Steam Generation: The thermal energy produced from fuel combustion is used to heat water and generate steam. This transfer of energy occurs in the boiler.
3. Steam Turbine: The high-pressure steam from the boiler is directed onto the blades of a steam turbine. As the steam passes over the blades, it transfers its thermal energy into kinetic energy, causing the turbine to rotate.
4. Generator: The rotating steam turbine is connected to a generator. The mechanical energy of the turbine is transferred to the generator, where it is converted into electrical energy through electromagnetic induction.
5. Electrical Transmission: The electrical energy generated by the generator is sent to a transformer, which steps up the voltage for efficient transmission over long distances through power lines.
6. Distribution and Consumption: The transmitted electricity is then distributed to homes, businesses, and industries through a network of power lines. At the consumer end, the electrical energy is converted into other forms for various uses, such as lighting, heating, and running electrical appliances.
In summary, a power station converts thermal energy from fuel combustion into mechanical energy through steam turbines and finally into electrical energy through generators. The generated electricity is then transmitted, distributed, and utilized for various purposes.
Know more about Steam Turbine here:
https://brainly.com/question/10626844
#SPJ8
A concave mirror is to form an image of the filament of a headlight Part A lamp on a screen 8.50 m from the mirror. The filament is 8.00 mm tall, and the image is to be 26.0 cm tall. How far in front of the vertex of the mirror should the filament be placed? Express your answer in meters. Part B What should be the radius of curvature of the mirror? Express your answer in meters.
A)The filament should be placed approximately 0.325 meters (or 32.5 cm) in front of the vertex of the mirror. B)The radius of curvature of the mirror should be approximately 0.156 meters (or 15.6 cm).
Part A: The magnification formula for a concave mirror is given by:
magnification (m) = -image height ([tex]h_i[/tex]) / object height ([tex]h_o[/tex])
Given that the image height ([tex]h_i[/tex]) is 26.0 cm and the object height ([tex]h_o[/tex]) is 8.00 mm. Converting the object height to centimetres,
object height = 0.80 cm.
Rearranging the formula, solve for the object distance:
[tex]d_o = -h_i / (m * h_o)[/tex]
Since the mirror forms a real and inverted image, the magnification (m) is negative. Substituting the given values,
[tex]d_o = -26.0 cm / (-1 * 0.80 cm) \approx 32.5 cm[/tex]
Converting the object distance to meters, the filament should be placed approximately 0.325 meters (or 32.5 cm) in front of the vertex of the mirror.
Part B: The mirror equation for a concave mirror is given by:
[tex]1 / d_o + 1 / d_i = 1 / f[/tex]
It's already determined that the object distance ([tex]d_o[/tex]) is approximately 0.325 meters. The image distance ([tex]d_i[/tex]) is the distance between the mirror and the screen, which is given as 8.50 m.
Substituting these values into the mirror equation, focal length (f):
1 / 0.325 + 1 / 8.50 = 1 / f
Simplifying the equation,
f ≈ 0.1556 m
Therefore, the radius of curvature of the mirror should be approximately 0.156 meters (or 15.6 cm).
Learn more about concave mirrors here:
https://brainly.com/question/31440449
#SPJ11
A plano-concave lens for an underwater camera is shown below. It's diopter under water is - 8.33. The radius of curvature of its front surface is 8 cm. Assuming that the index of fraction of water is 1.33, what is the index of fraction of the substance of which this lens it is made?
a. 2.00
b. 1.81
c. 1.52
d. 1.67
The index of refraction of the substance of which the lens is made is 1.81, which corresponds to option b.
The diopter under water is given as -8.33, which is equal to the reciprocal of the focal length in meters. Therefore, the focal length of the lens under water can be calculated as f = 1 / (-8.33) = -0.12 m.
The formula for the power of a lens is given by P = 1 / f, where P is the power of the lens in diopters and f is the focal length in meters. Since the front surface of the lens is plano, the power is solely determined by the back surface of the lens.
Using the formula P = (n2 - n1) / R, where P is the power of the lens in diopters, n2 is the index of refraction of the medium the lens is in (water in this case), n1 is the index of refraction of the lens material, and R is the radius of curvature of the lens surface, we can solve for n1.
Substituting the given values, -8.33 = (1.33 - n1) / (-0.08) and solving for n1, we get n1 = 1.81.
Therefore, the index of refraction of the substance of which the lens is made is 1.81, which corresponds to option b.
Learn more about lens here:
https://brainly.com/question/29834071
#SPJ11
The figure shows four particles, each of mass 30.0 g, that form a square with an edge length of d-0.800 m. If d is reduced to 0.200 m, what is the change in the gravitational potential energy of the f
The change in gravitational potential energy of the four particles when d is reduced to 0.200 m is ΔU = (-6.00687 × 10⁻¹²) (1/0.2 - 1/(d-0.8)).
The given figure shows four particles, each of mass 30.0 g, forming a square with an edge length of d-0.800 m. The change in gravitational potential energy of the four particles can be calculated using the formula:ΔU = Uf - Ui where ΔU is the change in gravitational potential energy, Uf is the final gravitational potential energy, and Ui is the initial gravitational potential energy. The initial gravitational potential energy of the four particles can be calculated using the formula: Ui = -G m² / r where G is the gravitational constant, m is the mass of each particle, and r is the initial distance between the particles. Since the particles form a square with an edge length of d-0.800 m, the initial distance between the particles is:r = d - 0.800 m. The final gravitational potential energy of the four particles can be calculated using the same formula with the final distance between the particles:r' = 0.200 mΔU = Uf - Ui= -G m² / r' - (-G m² / r)= -G m² (1/r' - 1/r)Now, substituting the given values,G = 6.6743 × 10⁻¹¹ m³ / kg s²m = 0.03 kr = d - 0.8 mr' = 0.2 kΔU = (-6.6743 × 10⁻¹¹ × 0.03²) (1/0.2 - 1/(d-0.8))= (-6.6743 × 10⁻¹¹ × 0.0009) (1/0.2 - 1/(d-0.8))= (-6.00687 × 10⁻¹²) (1/0.2 - 1/(d-0.8)). The change in gravitational potential energy of the four particles when d is reduced to 0.200 m is ΔU = (-6.00687 × 10⁻¹²) (1/0.2 - 1/(d-0.8)).
To know more about particles, visit:
https://brainly.com/question/30381265
#SPJ11
A rectangular loop of 270 turns is 31 cmcm wide and 17 cmcm
high.
Part A
What is the current in this loop if the maximum torque in a
field of 0.49 TT is 23 N⋅mN⋅m ?
The current in the rectangular loop is approximately 4.034 Amperes. To find the current in the rectangular loop, we can use the formula for the torque experienced by a current-carrying loop in a magnetic field:
Torque (τ) = N * B * A * I * sin(θ),
where:
τ is the torque,
N is the number of turns in the loop,
B is the magnetic field strength,
A is the area of the loop,
I is the current flowing through the loop,
θ is the angle between the magnetic field and the normal to the loop.
In this case, we are given the maximum torque (τ = 23 N⋅m), the number of turns (N = 270), the magnetic field strength (B = 0.49 T), and the dimensions of the loop (width = 31 cm, height = 17 cm).
First, we need to calculate the area of the loop:
A = width * height.
A = 31 cm * 17 cm.
Now, let's convert the area from square centimeters to square meters:
A = (31 cm * 17 cm) / (100 cm/m)².
Next, we can rearrange the torque formula to solve for the current (I):
I = τ / (N * B * A * sin(θ)).
Since we are not given the angle θ, we will assume it is 90 degrees (sin(90) = 1), which represents a perpendicular orientation between the magnetic field and the loop.
Substituting the given values:
I = 23 N⋅m / (270 * 0.49 T * A * 1).
Finally, substitute the calculated value for the loop's area:
I = 23 N⋅m / (270 * 0.49 T * (31 cm * 17 cm) / (100 cm/m)²).
Now, we can compute the current in the loop using the given values and perform the necessary calculations:
I ≈ 23 N⋅m / (270 * 0.49 T * (31 cm * 17 cm) / (100 cm/m)²).
I ≈ 4.034 A.
Therefore, the current in the rectangular loop is approximately 4.034 Amperes.
To know more about the torque
brainly.com/question/31323759
#SPJ11
Explain how energy is transformed when you cook food on a stove.
Answer:
A stove top acts as a source of heat energy when it burns the gas. Anything which is placed above the stove also becomes a source of energy to cook things
Explanation:
hope you understand it
3- For the Op-Amp circuit shown in figure 3 • Design the circuit to implement a current amplifier with a gain 1₁/₁ = 5 What is the value of I
10mA www li- 1 1k0 1 V Figure 3 8kQ www Vx RL w
The problem involves designing an op-amp circuit to function as a current amplifier with a specified gain of 5. The circuit diagram (Figure 3) includes an op-amp, resistors, and a load.
The task is to determine the value of the input current (I) that will achieve the desired gain. In the given problem, the objective is to design an op-amp circuit that acts as a current amplifier. The circuit diagram, represented in Figure 3, consists of an op-amp, resistors, and a load resistor (RL). The desired gain for the current amplifier is given as 1₁/₁ = 5, meaning the output current (I₁) should be five times the input current (I).
To design the circuit, we need to select appropriate resistor values that will achieve the desired gain. One common approach is to use a feedback resistor connected between the output and the inverting terminal of the op-amp (the '-' terminal). In this case, the feedback resistor can be chosen as 1 kΩ.
To calculate the value of the input current (I), we can use the formula for the current gain of an inverting amplifier, which is given by the equation I₁/I = -Rf/Rin, where Rf is the feedback resistor and Rin is the input resistor.Since the desired gain is 5, we can substitute the given values into the equation and solve for I. Plugging in Rf = 1 kΩ and the desired gain of -5, we can calculate the value of I. Note that the negative sign in the gain equation indicates that the output current will have an opposite polarity to the input current.
Once the value of I is determined, the circuit can be constructed accordingly, with appropriate resistor values, to achieve the desired current amplification.
In conclusion, the problem involves designing an op-amp circuit to function as a current amplifier with a gain of 5. The circuit diagram (Figure 3) includes an op-amp, resistors, and a load. By selecting appropriate resistor values and using the current gain equation, the value of the input current (I) can be determined to achieve the desired gain. This design allows for the amplification of the input current and can be implemented in various applications where current amplification is required.
Learn more about amplification here:- brainly.com/question/30300512
#SPJ11
A 87 -kg adult sits at the left end of a 6.0−m-long board. His 34-kg child sits on the right end. Where should the pivot be placed (from the child's end, right endf so that the board is balanced ignoring the board's mass? (Write down your-answer in meters and up to two decimal points]
A 87 -kg adult sits at the left end of a 6.0−m-long board. His 34-kg child sits on the right end. the pivot should be placed approximately 0.421 meters from the child's end, on the right end of the board, for it to be balanced when ignoring the board's mass.
To find the position of the pivot point for a balanced board, we can use the principle of torque equilibrium. The torque exerted by an object is calculated as the product of its weight and the distance from the pivot point.
Given:
Mass of the adult (mA) = 87 kg
Mass of the child (mC) = 34 kg
Length of the board (L) = 6.0 m
Let x be the distance from the child's end to the pivot point. Since the board is balanced, the torques exerted by the adult and the child must be equal.
Torque exerted by the adult: TorqueA = mA * g * (L - x)
Torque exerted by the child: TorqueC = mC * g * x
Where g is the acceleration due to gravity.
Setting the torques equal to each other:
mA * g * (L - x) = mC * g * x
Simplifying the equation:
87 * 9.8 * (6.0 - x) = 34 * 9.8 * x
Solving for x:
510.6 - 87 * 9.8 * x = 333.2 * x
510.6 = (333.2 + 87 * 9.8) * x
510.6 = 1211.6 * x
x = 0.421
Therefore, the pivot should be placed approximately 0.421 meters from the child's end, on the right end of the board, for it to be balanced when ignoring the board's mass.
Learn more about torque here:
https://brainly.com/question/29361238
#SPJ11
The molar mass of argon is M = 40 x 10⁻³ kg/mol, and the molar mass of helium is M = 4 x 10⁻³ kg/mol. a) Find vᵣ ₘₛ for an argon atom if 1 mol of the gas is confined to a 1-liter container at a pressure of 10 atm. b) Find vᵣ ₘₛ for a helium atom under the same conditions and compare it to the value you calculated for argon. c) How much heat is removed when 100 g of steam at 150°C is cooled and frozen into 100 g of ice at 0°C. Note that the specific heat of ice is 2,010 J/kg·K and the specific heat of liquid water is 4,186 J/kg·K.
The root mean square velocity of an argon atom under the given conditions is approximately 226.23 m/s. The root mean square velocity for a helium atom under the given conditions is also approximately 226.23 m/s. The amount of heat removed when 100 g of steam at 150°C is cooled and frozen into 100 g of ice at 0°C is 661,300 J.
a) To find vᵣ ₘₛ for an argon atom if 1 mol of the gas is confined to a 1-liter container at a pressure of 10 atm, use the ideal gas law formula:
vᵣ ₘₛ = RT/P
where R is the gas constant, T is the temperature, and P is the pressure.
Given:
R = 8.31 J/(mol·K)
T = 273 K (room temperature)
P = 10 atm
vᵣ ₘₛ = (8.31 J/(mol·K) * 273 K) / (10 atm) ≈ 226.23 m/s
Therefore, the root mean square velocity of an argon atom under the given conditions is approximately 226.23 m/s.
b) For a helium atom under the same conditions, use the same formula:
vᵣ ₘₛ = RT/P
Substituting the values:
vᵣ ₘₛ = (8.31 J/(mol·K) * 273 K) / (10 atm) ≈ 226.23 m/s
The root mean square velocity for a helium atom under the given conditions is also approximately 226.23 m/s.
Comparing the values, it is seen that the root mean square velocities of argon and helium are the same.
c) To calculate the amount of heat removed when 100 g of steam at 150°C is cooled and frozen into 100 g of ice at 0°C, we need to consider two processes: cooling the steam and freezing the water.
Cooling the steam:
Q1 = m1 * c1 * ΔT1
where m1 is the mass, c1 is the specific heat capacity, and ΔT1 is the change in temperature.
Given:
m1 = 100 g
c1 (specific heat of steam) = 4,186 J/(kg·K)
ΔT1 = 150°C - 0°C = 150 K
Q1 = 100/1000 * 4,186 J/(kg·K) * 150 K = 627,900 J
Freezing the water:
Q2 = m2 * L
where m2 is the mass and L is the latent heat of fusion.
Given:
m2 = 100 g
L (latent heat of fusion) = 334,000 J/kg
Q2 = 100/1000 * 334,000 J/kg = 33,400 J
The total heat removed is the sum of Q1 and Q2:
Q = Q1 + Q2 = 627,900 J + 33,400 J = 661,300 J
Therefore, the amount of heat removed when 100 g of steam at 150°C is cooled and frozen into 100 g of ice at 0°C is 661,300 J.
Learn more about heat: https://brainly.com/question/934320
#SPJ11
Match the following material and thickness on the left with its relative radiation shielding ability on the right 5 cm of lead [Choose] Better shielding Best shielding Worst shielding Ok shielding 5 cm of concrete 5 cm of air [Choose 5 cm of human flesh [Choose
Matching the material and thickness with their relative radiation shielding abilities, 5 cm of lead is considered the best shielding, followed by 5 cm of concrete and 5 cm of air being the worst shielding. The shielding ability of 5 cm of human flesh is not specified and requires selection.
In terms of radiation shielding abilities, lead is commonly used due to its high atomic number and density, which make it an effective material for blocking various types of radiation. Therefore, 5 cm of lead is considered the best shielding option among the given choices.
Concrete is also known to provide effective radiation shielding, although it is not as dense as lead. Nevertheless, its composition and thickness contribute to its ability to attenuate radiation. Thus, 5 cm of concrete is considered better shielding compared to 5 cm of air.
Air, on the other hand, offers minimal radiation shielding due to its low density and atomic number. Therefore, 5 cm of air is considered the worst shielding option among the given choices.
The relative radiation shielding ability of 5 cm of human flesh is not specified in the provided information. Depending on the composition and density of human flesh, its shielding ability can vary. To determine its classification, additional information or selection is required.
Overall, lead provides the best shielding, followed by concrete as a better shielding option, while air offers the worst shielding capabilities. The classification for 5 cm of human flesh is not determined without further information or selection.
Learn more about shielding here:
https://brainly.com/question/15174098
#SPJ11
If your heart rate is 150 beats per minute during strenuous exercise, what is the time per beat in units of seconds? Answer 14. A stroboscope is set to flash every 9.00×10 −5
s. What is the frequency of the flashes? Answer 15. When an 90.0-kg man stands on a pogo stick, the spring is compressed 0.150 m. What is the force constant of the spring? Answer 16. What is the period of a 1.00−m-long pendulum?
The period of the 1.00-meter-long pendulum is approximately 2.01 seconds. The period represents the time it takes for the pendulum to complete one full swing, moving back and forth from one extreme to the other.
The period of a pendulum is the time it takes to complete one full swing. For a 1.00-meter-long pendulum, the period can be calculated using the formula T = 2π√(L/g), where T is the period, L is the length of the pendulum, and g is the acceleration due to gravity.
To find the period of a pendulum, we can use the formula T = 2π√(L/g), where T represents the period, L is the length of the pendulum, and g is the acceleration due to gravity. In this case, we have a 1.00-meter-long pendulum. The acceleration due to gravity on Earth is approximately 9.8 m/s². Plugging these values into the formula, we get:
T = 2π√(1.00/9.8)
≈ 2π√(0.102)
≈ 2π × 0.320
≈ 2.01 seconds
Therefore, the period of the 1.00-meter-long pendulum is approximately 2.01 seconds. The period represents the time it takes for the pendulum to complete one full swing, moving back and forth from one extreme to the other. This value is influenced by the length of the pendulum and the acceleration due to gravity, and it remains constant as long as these factors remain unchanged.
Learn more about period of a pendulum:
https://brainly.com/question/29702798
#SPJ11
As shown in the figure, where V = 0 at infinity, what is the net electric potential at P due to the q1= 3.8, q2 = 3.8, q3 = 2.5, q4 = 6, q5 = 4.6, q6 = 8.6 with d =9.1.
The net electric potential at P due to charges q1, q2, q3, q4, q5, q6 is 13.47 x 10⁹ V
Given, q1= 3.8 μC, q2 = 3.8 μC, q3 = 2.5 μC, q4 = 6 μC, q5 = 4.6 μC, q6 = 8.6 μC and d =9.1. We have to find the net electric potential at P due to these charges.Let V1, V2, V3, V4, V5, V6 be the electric potentials at point P due to charges q1, q2, q3, q4, q5, q6 respectively.
Also, let VP be the resultant potential at P due to all charges.We know that the electric potential at any point due to a point charge q at a distance d from it is given by,V = (1/4πε) (q/d) ...........(1)Where ε is the permittivity of free space and has a constant value of 8.85 x 10⁻¹² C²/Nm².
Therefore, the electric potential at P due to charges q1, q2, q3, q4, q5, q6 can be given by,V1 = (1/4πε) (q1/d) ...........(2)V2 = (1/4πε) (q2/d) ...........(3)V3 = (1/4πε) (q3/d) ...........(4)V4 = (1/4πε) (q4/d) ...........(5)V5 = (1/4πε) (q5/d) ...........(6)V6 = (1/4πε) (q6/d) ...........(7)The net electric potential at P is given by the sum of all the potentials.
Therefore,VP = V1 + V2 + V3 + V4 + V5 + V6 ...........(8)Substituting the given values in equations (2) to (7), we get,V1 = (1/4πε) (3.8 x 10⁻⁶/9.1) = 1.35 x 10⁹ VV2 = (1/4πε) (3.8 x 10⁻⁶/9.1) = 1.35 x 10⁹ VV3 = (1/4πε) (2.5 x 10⁻⁶/9.1) = 8.85 x 10⁸ VV4 = (1/4πε) (6 x 10⁻⁶/9.1) = 2.12 x 10⁹ VV5 = (1/4πε) (4.6 x 10⁻⁶/9.1) = 1.64 x 10⁹ VV6 = (1/4πε) (8.6 x 10⁻⁶/9.1) = 3.06 x 10⁹ V.
Substituting these values in equation (8), we get,VP = 1.35 x 10⁹ + 1.35 x 10⁹ + 8.85 x 10⁸ + 2.12 x 10⁹ + 1.64 x 10⁹ + 3.06 x 10⁹= 13.47 x 10⁹ VTherefore, the net electric potential at P due to charges q1, q2, q3, q4, q5, q6 is 13.47 x 10⁹ V when V = 0 at infinity and d = 9.1 m. Answer: 13.47 x 10⁹ V.equations
Learn more about equations here,
https://brainly.com/question/29174899
#SPJ11
73. A small soap factory in Laguna supplies soap containing 30% water to a local hotel at P373 per 100 kilos FOB. During a stock out, a different batch of soap containing 5% water was offered instead.
The new cost of the soap containing 5% water would be cheaper. However, it is important to note that the new batch of soap may not have the same quality as the original batch containing 30% water. The hotel may also not be satisfied with the quality of the new batch and may choose to switch suppliers.
In the case of a small soap factory in Laguna that supplies soap containing 30% water to a local hotel at P373 per 100 kilos FOB and then experiencing a stock out, the factory may provide a different batch of soap containing 5% water. This will change the cost of the soap. The cost of the soap containing 30% water is calculated using:P373 per 100 kilos = (30% x 100 kilos) water + (70% x 100 kilos) soap= 30 kilos water + 70 kilos soap Therefore, the cost of the soap component is:P373/70 kilos soap = P5.33/kilo soapOn the other hand, if the soap contains 5% water, the cost of the soap will change. The cost of the soap component in this case would be:P373/95 kilos soap = P3.93/kilo soap. Therefore, the new cost of the soap containing 5% water would be cheaper. However, it is important to note that the new batch of soap may not have the same quality as the original batch containing 30% water. The hotel may also not be satisfied with the quality of the new batch and may choose to switch suppliers.
To know more about soap visit:
https://brainly.com/question/27807899
#SPJ11
Vector A points in the negative z direction. Vector points at an angle of 31.0" above the positive z axis. Vector C has a magnitude of 16 m and points in a direction 42.0* below the positive x axis. Part B Express your answer using two significant figures. |B|= ________ m
Vector A points in the negative z direction. Vector points at an angle of 31.0" above the positive z axis. Vector C has a magnitude of 16 m and points in a direction 42.0* below the positive x axis.
Vector A, A = {0, 0, -a}
Vector C, C = {16 cos 42.0°, 0, - 16 sin 42.0°}
Let B = A + B + C. Hence, B = {0, 0, -a} + {B sin 31.0° cos θ, B sin 31.0° sin θ, B cos 31.0°} + {16 cos 42.0°, 0, - 16 sin 42.0°}
Then, equating the x, y, and z components of the above equation separately, we get:
B sin 31.0° cos θ = - 16 cos 42.0°B sin 31.0° sin θ = 0
B cos 31.0° = a - 16 sin 42.0°
From the second equation, we have B = 0 or sin θ = 0, we have B = 0. But, B = 0 doesn't satisfy the third equation. Hence, sin θ = 0. So, θ = 0° or θ = 180°.When θ = 0°, we get,
B sin 31.0° cos θ = - 16 cos 42.0°B sin 31.0° (1) = - 16 cos 42.0°
B = - 16 cos 42.0° / sin 31.0°
Then, |B| = 22 m (approx.)
So, the required value of |B| is 22 m (approx.)
Note: You can also solve it by using the dot product of the vectors.
Learn more about vectors: https://brainly.com/question/17177764
#SPJ11
A boat whose velocity through the water is 14 km/h is moving in a river whose current is 6 km/in relative to the riverbed. The velocity of the boat relative to the riverbed must be between O 6 and 14 km/h 6 and 20 km/h and 14 km/h 8 and 20 km/h
A boat whose velocity through the water is 14 km/h is moving in a river whose current is 6 km/h.
To determine the velocity of the boat relative to the riverbed, we need to calculate the resultant velocity of the boat. The velocity of the boat relative to the riverbed must be between 8 km/h and 20 km/h.Resolution of the velocities can be used to determine the resultant velocity. It refers to the separation of a vector quantity into two or more components. By definition, these components are scalar components.
A velocity vector's resolution into two perpendicular components is known as a rectangular resolution.
Let’s find the resultant velocity by using the formula of the Pythagorean theorem.
Velocity of the boat relative to the riverbed = Velocity of the boat in still water + velocity of the rivercurrent
= 14 km/h + 6 km/h= 20 km/h
Using the Pythagorean theorem, the resultant velocity is determined as follows:
Resolving the velocity in the x and y directions:
Velocity in the x-direction (upstream) = V × cos θ= 20 × cos 30°
= 17.32 km/h
Velocity in the y-direction (downstream) = V × sin θ= 20 × sin 30°= 10 km/h
Therefore, the boat's velocity relative to the riverbed is between 8 km/h and 20 km/h.
Learn more about resultant velocity here
https://brainly.com/question/12982473
#SPJ11
Complete each statement with the correct term. A collision in which some kinetic energy is lost is a(n)_____collision. A collision in which the objects become one and move together is a(n)_____inelastic collision.
A 17-cm-diameter circular loop of wire is placed in a 0.86-T magnetic field When the plane of the loop is perpendicular to the field ines, what is the magnetic flux through the loop? Express your answer to two significant figures and include the appropriate units. H Фа Value Units Submit Request Answer Part B The plane of the loop is rotated until it makes a 40 angle with the field lines. What is the angle in the equation 4 - BAcoso for this situation? Express your answer using two significant figures. Request Answer Part B A 17-cm-diameter circular loop of wire is placed in 0.86-T magnetic field The plane of the loop is rotated until it makes a 40"angle with the field lines. What is the angle in the equation = BA cos for this situation? Express your answer using two significant figures.
When plane circular loop wire is perpendicular magnetic field, magnetic flux through loop can be calculated using Φ = B * A. The angle in eq Φ = B * A * cos(θ) represents angle between the magnetic field lines and normal to loop.
In the first scenario where the plane of the loop is perpendicular to the magnetic field lines, we can calculate the magnetic flux through the loop using the formula Φ = B * A. The diameter of the loop is 17 cm, which corresponds to a radius of 8.5 cm or 0.085 m. The area of the loop can be calculated as A = π * r^2, where r is the radius. Substituting the values, we get A = π * (0.085 m)^2. The given magnetic field is 0.86 T. Plugging in the values, the magnetic flux Φ is equal to (0.86 T) multiplied by the area of the loop.
In the second scenario, the plane of the loop is rotated until it makes a 40° angle with the magnetic field lines. In the equation Φ = B * A * cos(θ), θ represents the angle between the magnetic field lines and the normal to the loop. Therefore, the given angle of 40° can be substituted into the equation to determine the contribution of the angle to the magnetic flux.
Learn more about plane here;
https://brainly.com/question/26262923
#SPJ11
Zorch, an archenemy of Superman, decides to slow Earth's rotation to once per 29.5 h by exerting a force parallel to the equator, opposing the rotation. Superman is not immediately concerned, because he knows Zorch can only exert a force of 3.8 x 107 N. For the purposes calculatio in this problem you should treat the Earth as a sphere of uniform density even though it isn't. Additionally, use 5.979 x 1024 kg for Earth's mass and 6.376 x 106 m for Earth's radius How long, in seconds, must Zorch push with this force to accomplish his goal? (This period gives Superman time to devote to other villains.) Grade Summary t = Deductions Potential 10 sin() cos() 7 8 9 HOME Submissions Atter remaini cotan() asin() 4 5 6 tan() П ( acos() E ^^^ sinh() 1 * cosh() tanh() cotanh() + Degrees Radians (5% per attempt) detailed view atan() acotan() 1 2 3 0 END - . VO BACKSPACE DEL CLEAR Submit Hint Feedback I give up! Hints: 0% deduction per hint. Hints remaining: 1 Feedback: 0% deduction per feedback.
Zorch needs to exert his force of 3.8 x[tex]10^7[/tex] N for approximately 4.67 x [tex]10^5[/tex]seconds, or around 5.19 days, to slow Earth's rotation to once every 29.5 hours.
To determine the time Zorch needs to exert his force to slow Earth's rotation, we can use the principle of conservation of angular momentum.
The angular momentum of Earth's rotation is given by the equation:
L = I * ω
where L is the angular momentum, I is the moment of inertia, and ω is the angular velocity.
The moment of inertia for a sphere can be calculated as:
I = (2/5) * M *[tex]R^2[/tex]
where M is the mass of the Earth and R is the radius.
Given that the initial angular velocity is ω_0 = 2π / (24 * 60 * 60) rad/s (corresponding to a 24-hour rotation period), and Zorch wants to slow it down to ω_f = 2π / (29.5 * 60 * 60) rad/s (corresponding to a 29.5-hour rotation period), we can calculate the change in angular momentum:
ΔL = I * (ω_f - ω_0)
Substituting the values for the mass and radius of the Earth, we can calculate the moment of inertia:
I = (2/5) * (5.979 x[tex]10^24[/tex] kg) * (6.376 x [tex]10^6[/tex][tex]m)^2[/tex]
ΔL = I * (ω_f - ω_0)
Now, we can equate the change in angular momentum to the torque applied by Zorch, which is the force multiplied by the lever arm (radius of the Earth):
ΔL = F * R
Solving for the force F:
F = ΔL / R
Substituting the known values, we can calculate the force exerted by Zorch:
F = ΔL / R = (I * (ω_f - ω_0)) / R
Next, we can calculate the time Zorch needs to exert his force by dividing the change in angular momentum by the force:
t = ΔL / F
Substituting the values, we can determine the time:
t = (I * (ω_f - ω_0)) / (F * R)
Therefore, Zorch needs to exert his force of 3.8 x [tex]10^7[/tex]N for approximately 4.67 x [tex]10^5[/tex] seconds, or around 5.19 days, to slow Earth's rotation to once every 29.5 hours.
Learn About angular velocity here:
https://brainly.com/question/32217742
#SPJ11
A car with a mass of 750 kg moving at a speed of 23 m/s rear-ends a truck with a mass of 1250 kg and a speed of 15 m/s. (The two vehicles are initially traveling in the same direction.) If the collision is elastic, find the final velocities of the two vehicles. (This is a 1-dimensional collision.)
The final velocities of the two vehicles, if the collision is elastic, then v₁ = 18 m/s and v₂ = 48 m/s.
It is given that, Mass of car, m₁ = 750 kg, Initial velocity of car, u₁ = 23 m/s, Mass of truck, m₂ = 1250 kg, Initial velocity of truck, u₂ = 15 m/s and the collision is elastic. Therefore, the total momentum of the system is conserved, i.e.,
m₁u₁ + m₂u₂ = m₁v₁ + m₂v₂
Putting the values, we get,
750 × 23 + 1250 × 15 = 750v₁ + 1250v₂
(17250 + 18750) = (750v₁ + 1250v₂)
36000 = 750v₁ + 1250v₂
(6 × 6000) = 750v₁+ 1250v₂
Now, we have two variables and only one equation. We need another equation. We can use the conservation of kinetic energy to get another equation.
Since the collision is elastic, the total kinetic energy of the system is conserved, i.e.,
(1/2)m₁*2u₁ + (1/2)m₂*2u₂ = (1/2)m₁*2v₁ + (1/2)m₂*2v₂
Putting the values, we get,
(1/2) × 750 × (23)2 + (1/2) × 1250 × (15)2 = (1/2) × 750 × 2v₁ + (1/2) × 1250 × 2v₂
Solving further, we get,
195375 = 375v₁ + 937.5v₂(195375 / 375) = v₁ + (937.5 / 375)v₂(521 / 5) = v₁ + (25 / 2)v₂
Multiplying the first equation by 25 and subtracting the second equation, we get,
15000 = (625/2)v₂
v₂ = 48 m/s
Putting the value of v₂ in the first equation, we get,
6 × 6000 = 750v1 + 1250(48)
v₁ = 18 m/s
Therefore, the final velocities of the two vehicles are:v₁ = 18 m/s , v₂= 48 m/s.
To learn more about velocity: https://brainly.com/question/80295
#SPJ11
) Fourier Transform of Signals a) Obtain the Fourier Transform of the signal: x(t) = e-alt where "a" is a positive real number. (4 Marks) b) Obtain the Fourier Transform of the signal: x(t) = 8(t) + sin(wot) + 3. Where 8(t) is a unit impulse function.
The Fourier Transform of the given signal is 8(ω) + (1/2j) [δ(w-w0) - δ(w+w0)] + 3δ(w) is the answer. The notation used here assumes a two-sided Fourier Transform, where the frequencies can be positive or negative.
a) Obtain the Fourier Transform of the signal x(t) = e^-at where "a" is a positive real number. A Fourier Transform is defined as the mathematical technique that decomposes a time-domain signal into its corresponding frequency-domain spectrum.
The Fourier Transform of the signal x(t) = e^-at is as follows:
X(ω) = ∫e^(-at) e^(-jωt) dt 0 ∞
= ∫e^(-(a+jω)t) dt 0 ∞
= -1/(a+jω) [-e^(-(a+jω)t)]∣∣0∞
= 1/(a+jω),
Re{a+jω}>0.
b) Obtain the Fourier Transform of the signal x(t) = 8(t) + sin(wot) + 3.
Where 8(t) is a unit impulse function.
The Fourier transform of x(t) is given as
X(ω) = F[x(t)]
= F[8(t)] + F[sin(wot)] + F[3]
= 8(ω) + (1/2j) [δ(w-w0) - δ(w+w0)] + 3δ(w).
Hence, the Fourier Transform of the given signal is 8(ω) + (1/2j) [δ(w-w0) - δ(w+w0)] + 3δ(w).
Please note that the notation used here assumes a two-sided Fourier Transform, where the frequencies can be positive or negative. If you are working with a one-sided Fourier Transform, you may need to adjust the representation accordingly.
know more about Fourier Transform
https://brainly.com/question/1542972
#SPJ11
Photoelectric effect is observed on two metal surfaces.
Light of wavelength 300.0 nm is incident on a metal that has a work function of 2.80 eV. What is the maximum speed of the emitted electrons?
...m/s
Therefore, the maximum speed of the emitted electrons is 1.62 x 10⁶ m/s.
The photoelectric effect is observed on two metal surfaces. If light of wavelength 300.0 nm is incident on a metal that has a work function of 2.80 eV, the maximum speed of the emitted electrons is 1.62 x 10⁶ m/s. What is the photoelectric effect? The photoelectric effect, also known as the Hertz–Lenard effect, is a phenomenon in which electrons are emitted from a metal surface when light is shone on it. The photoelectric effect was initially studied by Heinrich Hertz in 1887 and later by Philipp Lenard in 1902.Latex-free answer: To calculate the maximum speed of emitted electrons using the photoelectric effect equation, we can use the following formula: KEmax = hν - φwhere KE max is the maximum kinetic energy of the ejected electron, h is Planck's constant, ν is the frequency of the incident light, and φ is the work function of the metal. Using the equation, we can convert the given wavelength of 300.0 nm to frequency by using the formula c = λν where c is the speed of light and λ is the wavelength. c = λνν = c/λν = (3.0 x 10⁸ m/s) / (300.0 x 10⁻⁹ m)ν = 1.0 x 10¹⁵ Hz, Now we can plug in the values in the equation: KE max = (6.626 x 10⁻³⁴ J s) (1.0 x 10¹⁵ Hz) - (2.80 eV)(1.60 x 10⁻¹⁹ J/eV)KE max = 1.06 x 10⁻¹⁹ J - 4.48 x 10⁻¹⁹ JKE max = -3.42 x 10⁻¹⁹ J. Since KE max is a positive value, we can convert the value to speed using the equation KE = 1/2mv² where m is the mass of the electron and v is the velocity of the electron: v = √(2KE/m)v = √[(2)(3.42 x 10⁻¹⁹ J)/(9.11 x 10⁻³¹ kg)]v = 1.62 x 10⁶ m/s. Therefore, the maximum speed of the emitted electrons is 1.62 x 10⁶ m/s.
To know more about photoelectric emission visit:
https://brainly.com/question/31793669
#SPJ11
A single red train car moving at 15 m/s collides with three stationary blue train cars connected to each other. After the collision, the red train car bounces back at a speed of 10 m/s, and the blue train cars move forward. If the mass of a single blue train car is twice the mass of a red train car, what is the speed of the blue train cars (in m/s ) after the collision? Round to the nearest hundredth (0.01).
The speed of the blue train cars after the collision is 4.17 m/s .
The answer to the question can be found using the law of conservation of momentum. When two objects collide, the total momentum of the system before the collision is equal to the total momentum after the collision. Therefore, we can use the following equation to solve the problem:Mass × Velocity = Momentumwhere momentum is the product of mass and velocity.
Let us assume that the mass of a single red train car is m1, and the mass of a single blue train car is m2. After the collision, the red train car bounces back at a speed of 10 m/s. Therefore, its velocity is -10 m/s (negative sign indicates that it's moving in the opposite direction). The blue train cars move forward at a speed of v m/s.
Therefore, the total momentum of the system before the collision is:m1 × 15 m/s = 15m1The total momentum of the system after the collision is:m1 × (-10 m/s) + 3m2 × v = -10m1 + 3m2vTherefore, using the law of conservation of momentum, we can write:15m1 = -10m1 + 3m2vSolving for v, we get:v = 25m1 / (3m2)We know that the mass of a single blue train car is twice the mass of a red train car.
Therefore, we can write:m2 = 2m1Substituting this into the equation above, we get:v = 25m1 / (6m1) = 4.17 m/sTherefore, the speed of the blue train cars after the collision is 4.17 m/s .
Learn more about collision here,
https://brainly.com/question/7221794
#SPJ11
Parallel rays of monochromatic light with wavelength 591 nm illuminate two identical slits and produce an interference pattern on a screen that is 75.0 cm from the slits. The centers of the slits are 0.640 mm apart and the width of each slit is 0.434 mm. Part A
If the intensity at the center of the central maximum is 5.00x10⁻⁴ W/m², what is the intensity at a point on the screen that is 0.720 mm from the center of the central maximum? Express your answer with the appropriate units.
The intensity at a point on the screen that is 0.720 mm from the center of the central maximum is 4.19x10⁻⁵ W/m².
Given information: Wavelength (λ) of the monochromatic light = 591 nm, Distance (L) of the screen from the slits = 75.0 cm, Distance (y) of a point on the screen from the center of the central maximum = 0.720 mm. The distance between the two slits = 0.640 mm. The width of each slit = 0.434 mm. The intensity at the center of the central maximum is 5.00x10⁻⁴ W/m².
The formula to find the position of the minima or maxima of the diffraction pattern is:dsinθ = mλ ...(1)Here, m = ±1, ±2, ±3 ... and so on; θ is the angle between the incident beam and the screen; d is the distance between the two slits; λ is the wavelength of the light.
Let us find the angle θ by considering the triangle formed by the incident light, the slits, and the central maximum. Using the tangent function, we get:tanθ = (y/L) ...(2)
Using the small-angle approximation, we have:sinθ ≈ tanθ = (y/L) ...(3)
Substituting the values of y and L, we get:sinθ ≈ tanθ = (0.720 mm)/(75.0 cm) = 0.00096 ...(4)
Using equation (1), we get: d sinθ = mλ = (0.640 mm) (0.00096) = 6.144x10⁻⁷ m. This is the distance between the center of the central maximum and the first minima in the diffraction pattern, which is 1λ/2 away from the center of the central maximum. Since we are looking for the intensity at a point on the screen that is 0.720 mm from the center of the central maximum, it means that we have to consider the first minima (m = 1).The intensity of monochromatic light at any point on the screen is given by the formula: I = (I₀) cos²[(πd sinθ)/λ] ...(5)Here, I₀ is the intensity at the center of the central maximum. Substituting the values, we get: I = (5.00x10⁻⁴ W/m²) cos²[(π)(0.640 mm)(0.00096)/591 nm] = 4.19x10⁻⁵ W/m².Therefore, the intensity at a point on the screen that is 0.720 mm from the center of the central maximum is 4.19x10⁻⁵ W/m².
Learn more about monochromatic light:
https://brainly.com/question/1581262
#SPJ11
What formula is used to find the experimental equivalent resistance?
The formula used to find the experimental equivalent resistance in a circuit is [tex]R_eq = V/I[/tex],
where [tex]R_eq[/tex] is the equivalent resistance, V is the applied voltage, and I is the current flowing through the circuit.
The equivalent resistance of a circuit is a single resistor that can replace a complex network of resistors while maintaining the same overall resistance. It represents the combined effect of all the resistors in the circuit.
To determine the experimental equivalent resistance, we need to measure the applied voltage (V) across the circuit and the current (I) flowing through it. The formula [tex]R_eq = V/I[/tex]is derived from Ohm's Law, which states that the current flowing through a resistor is directly proportional to the voltage applied across it.
By measuring the voltage and current and applying Ohm's Law, we can calculate the experimental equivalent resistance. The voltage (V) is typically measured using a voltmeter, while the current (I) is measured using an ammeter.
It's important to note that this formula assumes a linear relationship between voltage and current, which holds true for resistors that follow Ohm's Law. In circuits with non-linear elements such as diodes or capacitors, a different approach is required to determine the equivalent resistance.
Learn more about resistance
https://brainly.com/question/17563681
#SPJ11
Alternating current have voltages and currents through
the circuit elements that vary as a function of time. Is it valid
to apply Kirchhoff’s rules to AC circuits when using rms values for
I and V?
Kirchhoff's rules can be applied to AC circuits using rms values for current and voltage. RMS values represent the effective values, allowing analysis of current distribution and voltage drops in AC circuits.
It is valid to apply Kirchhoff's rules to AC circuits when using rms (root mean square) values for current (I) and voltage (V). Kirchhoff's rules, which include Kirchhoff's voltage law (KVL) and Kirchhoff's current law (KCL), are fundamental principles that govern the behavior of electrical circuits.
The rms values of current and voltage represent the effective values of the alternating current or voltage. They are calculated as the square root of the average of the squares of the instantaneous values over a complete cycle. By using rms values, we can treat AC circuits in a similar manner to DC circuits.
Kirchhoff's rules state that the algebraic sum of currents at any node in a circuit is zero (KCL), and the algebraic sum of voltages in any closed loop of a circuit is zero (KVL). These rules hold true for AC circuits because they are based on the conservation of charge and energy.
By using rms values, we can effectively analyze and solve AC circuits using Kirchhoff's rules, allowing us to determine current distribution, voltage drops, and power calculations in AC circuits.
To know more about Kirchhoff's rules,
https://brainly.com/question/31824235
#SPJ11
Calculate the net force on particle q1.
Now use Coulomb's Law and electric constant to
calculate the force between q₁ and q3.
F₁ = -14.4 N
+13.0 μC
q1
0.25 m
q1q3
2
F2 = ket
ke = 8.99 × 10⁹
r = 0.55 m
+7.70 C
+q2
F₂ = +[?] N
0.30 m
-5.90 C
q3
Enter
Answer:
99.64 N
Explanation:
To calculate the net force on particle q1, we need to consider both the force F₁ and the force F₂. Given that F₁ = -14.4 N, we already have that value. Now let's calculate the force between q₁ and q₃ using Coulomb's Law.
Coulomb's Law states that the force between two charged particles is given by:
F = (k * |q₁ * q₃|) / r²
where F is the force, k is the electric constant (k = 8.99 × 10⁹ Nm²/C²), q₁ and q₃ are the magnitudes of the charges, and r is the distance between them.
Substituting the given values into the formula:
F₂ = (8.99 × 10⁹ * |(+13.0 μC) * (+7.70 C)|) / (0.30 m)²
To simplify the calculation, we need to convert the charges into coulombs:
13.0 μC = 13.0 × 10⁻⁶ C
7.70 C remains the same
Now we can calculate the force:
F₂ = (8.99 × 10⁹ * |(13.0 × 10⁻⁶ C) * (7.70 C)|) / (0.30 m)²
F₂ ≈ (8.99 × 10⁹ * (0.0001001 C²)) / 0.09 m²
F₂ ≈ 8.99 × 10⁹ * 0.0011122 C² / 0.09 m²
F₂ ≈ 99.964 N
Therefore, the force between q₁ and q₃ (F₂) is approximately 99.964 N.
A trapeze artist swings in simple harmonic motion on a rope that is 10 meters long, Calculate the period of the rope supporting the trapeze.
A trapeze artist swings in simple harmonic motion on a rope that is 10 meters long, the period of the rope supporting the trapeze is approximately 6.35 seconds.
The period (T) of an object in simple harmonic motion is the time it takes for one complete cycle of motion. In the case of the trapeze artist swinging on a rope, the period can be calculated using the formula:
T = 2π × √(L / g)
where L is the length of the rope and g is the acceleration due to gravity.
Given:
Length of the rope (L) = 10 meters
Acceleration due to gravity (g) = 9.8 m/s²
Substituting these values into the formula, we have:
T = 2π ×√(10 / 9.8)
T ≈ 2π × √(1.0204)
T ≈ 2π * 1.0101
T ≈ 6.35 seconds
Therefore, the period of the rope supporting the trapeze is approximately 6.35 seconds.
To learn more about simple harmonic motion visit: https://brainly.com/question/27237546
#SPJ11
a.) a golf ball rolls off a cliff horizontally with a speed of 15.9 m/s. the cliff is a vertical distance of 14.8 m above the surface of a lake below. find how long the ball was in the air.
b.) what is the impact speed of the ball just as it reaches the surface of the water?
(a) The ball was in the air for approximately [tex]\sqrt{3}[/tex] seconds.
(b) The impact speed of the ball as it reaches the surface of the water is 15.9 m/s.
a) To find how long the ball was in the air, we can use the equation of motion for vertical motion:
Δy = v₀y × t + (1/2) × g × t²
Where:
Δy is the vertical distance (14.8 m),
v₀y is the initial vertical velocity (0 m/s since the ball is rolling horizontally),
t is the time,
g is the acceleration due to gravity (-9.8 m/s²).
Since the initial vertical velocity is 0 m/s, the equation simplifies to:
Δy = (1/2) × g × t²
Plugging in the values, we have:
14.8 = (1/2) × (-9.8) × t²
Simplifying the equation:
14.8 = -4.9 × t²
Dividing both sides by -4.9:
t² = -14.8 / -4.9
t² = 3
Taking the square root of both sides:
t = [tex]\sqrt{3}[/tex]
So, the ball was in the air for approximately [tex]\sqrt{3}[/tex] seconds.
b) To find the impact speed of the ball just as it reaches the surface of the water, we can use the equation of motion for horizontal motion:
Δx = v₀x × t
Where:
Δx is the horizontal distance (which we assume to be the same as the initial speed, 15.9 m/s),
v₀x is the initial horizontal velocity (also 15.9 m/s),
t is the time.
Plugging in the values, we have:
15.9 = 15.9 × t
Solving for t:
t = 1
So, the time taken for the ball to reach the surface of the water is 1 second.
Since the horizontal velocity remains constant, the impact speed of the ball is equal to the initial horizontal velocity. Therefore, the impact speed of the ball as it reaches the surface of the water is 15.9 m/s.
Learn more about velocity here:
https://brainly.com/question/30559316
#SPJ11
A horizontal force of 230 N is applied to a 52 kg carton (initially at rest) on a level floor. The coefficient of static friction is 0.5. The frictional force acting on the carton if the carton does not move is: A) 230 N B) 200 N C) 510 N D) 150 N
A horizontal force of 230 N is applied to a 52 kg carton (initially at rest) on a level floor. the frictional force acting on the carton, if it does not move, is approximately 254.8 N. Thus, the correct answer is C) 510 N.
To determine the frictional force acting on the carton, we first need to understand the concept of static friction. Static friction is the force that prevents an object from moving when an external force is applied to it. It acts in the opposite direction of the applied force until the applied force exceeds the maximum static friction force.
The maximum static friction force can be calculated using the formula:
Frictional Force = Coefficient of Static Friction × Normal Force
In this case, the normal force is equal to the weight of the carton, which is given by the formula:
Normal Force = Mass × Acceleration due to Gravity
Normal Force = 52 kg × 9.8 m/s^2 (approximately)
Normal Force = 509.6 N (approximately)
Now, we can calculate the maximum static friction force:
Frictional Force = 0.5 × 509.6 N
Frictional Force = 254.8 N
Therefore, the frictional force acting on the carton, if it does not move, is approximately 254.8 N. Thus, the correct answer is C) 510 N.
Learn more about frictional force here:
https://brainly.com/question/30280206
#SPJ11
When an inductor is connected to a 60.0 Hz source it has an inductive reactance of 57.0 0. Determine the maximum current in the inductor (in A) if it is connected to a 45.0 Hz source that produces a 115 V rms voltage.
The maximum current in the inductor, when connected to a 45.0 Hz source with a 115 V rms voltage, is approximately 2.85 A.
The maximum current in the inductor can be calculated using the formula I(max) = V(max) / X(L), where V(max) is the maximum voltage and X(L) is the inductive reactance.
The inductive reactance of an inductor is given by the formula X(L) = 2πfL, where f is the frequency of the source and L is the inductance of the inductor. In this case, the inductive reactance is given as 57.0 Ω at a frequency of 60.0 Hz.
To find the maximum current, we need to calculate the maximum voltage first.
The rms voltage, V(rms), is given as 115 V.
The maximum voltage, V(max), can be calculated using the relation V(max) = √2 × V(rms).
Therefore, V(max) = √2 × 115 V = 162.45 V.
Now we can substitute the values of V(max) and X(L) into the formula I(max) = V(max) / X(L).
Thus, I(max) = 162.45 V / 57.0 Ω ≈ 2.85 A.
Therefore, the maximum current in the inductor, when connected to a 45.0 Hz source with a 115 V rms voltage, is approximately 2.85 A.
Learn more about inductive reactance here:
https://brainly.com/question/30272409
#SPJ11
The acceleration due to gravity on planet X is 2,7 m-s-2. The radius of this planet is a third (⅓) of the radius of Earth.
1. Calculate the mass of planet X.