g When the movable mirror of the Michelson interferometer is moved a small distance X while making a measurement, 246 fringes are counted moving into the field of the viewing mirror. What is X if the wavelength of the light entering the interferometer is 562 nm

Answer:

The correct answer is D. Creep.

Explanation:

Ground creep is a slow downward movement of a hill or mountain slope without the formation of demolition forms. The decisive factor for this is the continuous flow of movement of the soil.

The main driver of collapse is the movement of the surface layer particles during expansion in a direction perpendicular to the slope, followed by vertical collapse on contraction. The visible effect of the collapsing is the inclination of fences and poles, as well as trees that grow out of the ground towards the slope and have trunks curved vertically, in more extreme cases it may be cracks on the walls of buildings.

Answer:

See connections below

Explanation:

1   [tex]\Rightarrow[/tex] b

2   [tex]\Rightarrow[/tex] a

3   [tex]\Rightarrow[/tex] d

4   [tex]\Rightarrow[/tex] i

5   [tex]\Rightarrow[/tex] g

6   [tex]\Rightarrow[/tex]  h

7   [tex]\Rightarrow[/tex]  c

8   [tex]\Rightarrow[/tex]  e

9   [tex]\Rightarrow[/tex] f

Answer: intertia

Explanation:

Answer:

The power factor of the circuit is 0.99

Explanation:

Given;

resistance of the resistor, R = 65.2 ohms

capacitance of the capacitor, C = 2.26 μF = 2.26 x 10⁻⁶ F

inductance, L = 2.08 mH = 2.08 x 10⁻³ H

frequency of the AC, f = 2400 Hz

The angular frequency is given by;

ω = 2πf

ω = 2π(2400) = 15081.6 rad/s

The inductive reactance is given by;

XL = ωL

XL = (15081.6 x 2.08 x 10⁻³)

XL = 31.37 ohms

The capacitive reactance is given by;

[tex]X_c = \frac{1}{\omega C} \\\\X_c = \frac{1}{(15081.6)(2.26*10^{-6} )}\\\\X_c = 29.34 \ ohms[/tex]

The phase difference is given by;

[tex]tan\phi = \frac{X_l - X_c}{R}\\\\ tan\phi =\frac{31.37-29.34}{65.2} \\\\tan\phi = 0.0311 \\\\\phi = tan^{-1} (0.0311)\\\\\phi = 1.78^0[/tex]

The power factor is given by;

CosФ = Cos(1.78) = 0.99

Therefore, the power factor of the circuit is 0.99

Answer:

The

Explanation:

The horizontal distance covered is known as the range expressed as;

R = U√2H/g

U is the speed = 200m/s

H is the max height = 800m

g is the gravity = 9.8m/s²

R = 200√2(800)/9.8

R = 200√1600/9.8

R = 200√163.27

R = 200(12.78)

R = 2555.54

Hence the package should be released at a distance of 2555.54m

Answer:

[tex]5.86\times 10^{-7}\ \text{m}[/tex]

Explanation:

d = Slit separation = 0.11 mm

[tex]\theta[/tex] = Angle = [tex]0.61^{\circ}[/tex]

m = Order = 2

[tex]\lambda[/tex] = Wavelength

We have the relation

[tex]d\sin\theta=m\lambda\\\Rightarrow \lambda=\dfrac{d\sin\theta}{m}\\\Rightarrow \lambda=\dfrac{0.11\times 10^{-3}\times \sin0.61^{\circ}}{2}\\\Rightarrow \lambda=5.86\times 10^{-7}\ \text{m}[/tex]

The wavelength of the light is [tex]5.86\times 10^{-7}\ \text{m}[/tex].

Answer:

more than 51.45 N

__________________________________________________________

We are given:

Mass of the television = 15 kg

Coefficient of Static friction = 0.35

Minimum force required to move the television:

Normal Force:

We know that the normal force is equal and opposite to the Weight of the television

Weight of the television = Mg            

[where m is the mass and g is the acceleration due to gravity]

Weight = 15 * 9.8

Weight = 147 N

Force of Friction:

We are given the coefficient of Friction = 0.35

We know that coefficient of Friction = Force of friction / Normal Force

replacing the variables

0.35 = Force of Friction / 147

Force of Friction = 147 * 0.35                     [multiplying both sides by 147]

Force of Friction = 51.45 N

Since a force of 51.45 N is will be applied opposite to the direction of application of Force, the television will only move when we apply more force than 51.45 N

Answer:

it is C

Explanation:

Answer:

7 m/s (agrees with answer a in your list)

Explanation:

Recall that the centripetal acceleration is defined by the square of the tangential velocity divided by the radius of the rotational motion:

[tex]a_c=\frac{v_t^2}{R}[/tex]

then the tangential velocity is extracted from here as:

[tex]a_c=\frac{v_t^2}{R} \\v_t^2=a_c * R\\v_t=\sqrt{a_c * R}[/tex]

in our case, this becomes:

[tex]v_t=\sqrt{7*7} = 7 \,\,m/s[/tex]

Answer:

[tex]F = 5.4*10^{-8}\ N[/tex]

Explanation:

Given

Represent the mass of the student with M and the mass of the slice of pizza with m

[tex]M = 92kg[/tex]

[tex]m = 550g[/tex]

[tex]d = 25cm[/tex]

Required

Determine the force of attraction

This is calculated as:

[tex]F = \frac{GMm}{d^2}[/tex]

Where G = gravitational constant

[tex]G = 6.67408 * 10^{-11}\ m^3 kg^{-1} s^{-2}[/tex]

Convert both mass to kilogram and distance to metre

[tex]m = 550g[/tex]

[tex]m = 550kg/1000[/tex]

[tex]m = 0.55kg[/tex]

[tex]d = 25cm[/tex]

[tex]d = 25m/100[/tex]

[tex]d = 0.25m[/tex]

Substitute these values in [tex]F = \frac{GMm}{d^2}[/tex]

[tex]F = \frac{6.67408 * 10^{-11} * 92 * 0.55}{0.25^2}[/tex]

[tex]F = \frac{6.67408 * 92 * 0.55* 10^{-11} }{0.25^2}[/tex]

[tex]F = \frac{337.708448* 10^{-11} }{0.0625}[/tex]

[tex]F = 5403.335168* 10^{-11}[/tex]

[tex]F = 5.403335168* 10^3*10^{-11}[/tex]

[tex]F = 5.403335168*10^{3-11}[/tex]

[tex]F = 5.403335168*10^{-8}[/tex]

[tex]F = 5.4*10^{-8}\ N[/tex]

Answer:

The equation for such type of wave is  [tex]D_2 = sin(0.84.x + 47t + 21)[/tex]

Explanation:

From the question we are told that

   The displacement is [tex]D_1 = 4.2sin(0.84.x - 47t + 21)[/tex]

   Here  the wave number is  k=  0.84

              The angular frequency is  [tex]w = 47[/tex]

              The phase shift is  [tex]\phi = 21[/tex]

 Generally the equation that represents a wave which, when traveling in the opposite direction, will produce a standing wave when added to this one is mathematically represented as

             [tex]D_2 = sin(0.84.x + 47t + 21)[/tex]

Answer:solenoid with current running through it

Explanation:just took the test

Answer:

113 degrees

1.974 radians

Explanation:

The angle can be calculated using below expression

Angle = arc/r

Where arc= diameter of d = 310 millimeters

r= s = 306 millimeters long.

Since both have the same unit, no need for conversion

Angle = arc/r = 306/(0.5×310 )

= 306/155

= 1.974 radians

Then to find the angle In degrees we have

R x 180/pi = D

Where R= angle in radians= 1.974 radians

1.974 x 180/π

Where π= 22/7

= 113 degrees( approximately)

Therefore, central angle is subtended by one of the brake pads is 1.974 radians

Answer:

given us,

mass= 4×9.8gm m(9.8) formula

= 39.2

final velocity (v)= 60m/s

initial velocity (u)= 20m/s

time(t)= 10s

acleration(a)=?

now,

accleration(a)= v-u/t=60- 20/10

=40/10

=4m/s

:. the acceleration is 4 m/s

Explanation:

first we have to calculate mass and we can use acceleration formula

Answer: Titanium (Ti)

Explanation:

First, each element has a unique atomic number Z, that is equal to the number of protons in the nucleus.

The halogen in period 3 is chlorine (Ch)

Chlorine's atomic number is Z = 17, this means that it has 17 protons.

Now we want to find a transition metal that has 5 more protons, then this transition metal has Z = 17 + 5 = 22

Now we can look at the periodic table and find the element with Z = 22, and if this is in the d-block, then this will be a transition metal.

The element with Z = 22 is titanium (Ti)

Answer:

hi mate,

interesting question, first of all the pressure is determined by using the following formula:

Pg = p * G * h  

where p is the density of the liquid, G is the gravity and h is the height difference, in you case you have:

p = 1015 kg/m3

G = 9.8m/s2

h = 0.085 m  

insert these values into the equation above:

Pg = 1015 kg/m3 * 9.8m/s2 * 0.085 m = 849.81 kg·m-1·s-2 or 849.81 pascal

hope it helps, :-)

please mark me as brainliest

Answer:

Diameter of the piston would be 0.71 m (71.1 cm)

Explanation:

From the principle of pressure;

[tex]\frac{F_{1} }{A_{1} }[/tex] = [tex]\frac{F_{2} }{A_{2} }[/tex]

Let [tex]F_{1}[/tex] = 2903.57 lb, [tex]F_{2}[/tex] = 24.41 lbs, [tex]r_{2}[/tex] = 3.26 cm = 0.0326 m.

[tex]A_{2}[/tex] = [tex]\pi r^{2}[/tex]

    = [tex]\frac{22}{7}[/tex] x [tex](0.0326)^{2}[/tex]

    = 0.00334 [tex]m^{2}[/tex]

So that:

[tex]\frac{2903.57}{A_{1} }[/tex] = [tex]\frac{24.41}{0.00334}[/tex]

[tex]A_{1}[/tex] = [tex]\frac{2903.57*0.00334}{24.41}[/tex]

    = 0.3973

[tex]A_{1}[/tex] = 0.4 [tex]m^{2}[/tex]

The radius of the piston can be determined by:

[tex]A_{1}[/tex] = [tex]\pi r^{2}[/tex]

0.3973 = [tex]\frac{22}{7}[/tex] x [tex]r^{2}[/tex]

[tex]r^{2}[/tex] = [tex]\frac{0.3973*7}{22}[/tex]

   = 0.1264

r = [tex]\sqrt{0.1264}[/tex]

 = 0.3555

r = 0.36 m

Diameter of the piston = 2 x r

                                     = 2 x 0.3555

                                     = 0.711

Diameter of the piston would be 0.71 m (71.1 cm).

Answer:hat are some examples of energy transformation?

The Sun transforms nuclear energy into heat and light energy.

Our bodies convert chemical energy in our food into mechanical energy for us to move.

An electric fan transforms electrical energy into kinetic energy.

Explanation:

Answer:

this is a projectile

Answer:

D. projectile

Explanation:

Since it's dropped from a rest that means that it's velocity at the beginning is 0.

Answer:

77.6 Hz

Explanation:

What frequency is received by a person watching an oncoming ambulance moving at 115 km/h and emitting a steady 753 Hz sound from its siren.

The given parameters are:

Observer speed = 115 km/h

Source frequency = 753 Hz

Speed of sound = 342 m/s

First convert km/h to m/s

Observer speed = (115 × 1000) / 3600

Observer speed = 31.94 m/s

The frequency received by the person will be:

F = fv / ( V - v )

Where

F = frequency received by the person

f = siren frequency

V = speed of sound

v = speed of the ambulance

Substitute all the parameters into the formula

F = (753 × 31.94) / ( 342 - 31.94 )

F = 24050.82 / 310.06

F = 77.568 Hz

Therefore, the frequency received by a person is approximately 77.6Hz

Answer:

P_abs = 105120.2 N/m²

Explanation:

We are given;

Specific gravity of oil; ρ_oil = 0.6 g/cm³ = 600 kg/m³

Depth of water; h_w = 21 cm = 0.21 m

Depth of oil; h_o = 35 cm = 0.35 m

From tables specific gravity of water is; ρ_w = 1000 kg/m³

Thus, to get the absolute pressure at the bottom of the container, we will use the formula;

P_abs = (ρ_w × g × h_w) + (ρ_oil × g × h_oil) + P_a

Where P_a is atmospheric pressure with a standard value of 1.01 × 10^(5) N/m²

g is gravitational acceleration = 9.81 m/s²

Thus;

P_abs = (1000 × 9.81 × 0.21) + (600 × 9.81 × 0.35) + (1.01 × 10^(5))

P_abs = 105120.2 N/m²

Explanation:

m=200kg

a=2m/s2

F=ma

F=200kg×2m/s2

=400kg.m/s2 or 400N

Answer:

Available energy = 35 x 10⁶ J

Explanation:

Given:

Amount of energy (Q) = 21 gj = 21 x 10⁹ J

Temperature T1 = 600 k

Temperature T0 = 27 + 273 = 300k

Find:

Available energy

Computation:

Available energy = Q[1/T0 - 1/T1]

Available energy = 21 x 10⁹ J[1/300 - 1/600]

Available energy = 35 x 10⁶ J

Answer:

Energy, in physics, the capacity for doing work. It may exist in potential, kinetic, thermal, electrical, chemical, nuclear, or other various forms. There are, moreover, heat and work—i.e., energy in the process of transfer from one body to another.

Explanation:

Hope this helps!

Answer:

If the starting height of a sloped racetrack is increased, then the speed at which a toy car travels along the track will increase because the toy car will have a greater acceleration.

Explanation:

I hope this helped

Hypothesis: If the starting height of a sloped racetrack is increased, then the speed at which a toy car travels along the track will increase because the toy car gains more potential energy at the higher starting point.

When a toy car moves along a sloped racetrack, it converts its potential energy (due to its height above the ground) into kinetic energy (energy of motion). The higher the starting height of the racetrack, the more potential energy the toy car possesses initially.

As the toy car moves down the sloped track, it will accelerate due to the force of gravity. The potential energy is converted into kinetic energy, and the car's speed increases. According to the law of conservation of energy, the total mechanical energy (sum of potential and kinetic energy) remains constant as long as no external forces, such as friction, act on the car.

Therefore, if the starting height of the racetrack is increased, the toy car will have more potential energy to start with. As it moves down the track, it will convert this increased potential energy into kinetic energy, resulting in a higher speed compared to when it starts from a lower height.

To know more about speed here

https://brainly.com/question/17661499

#SPJ2

Answer:Acceleration implies any change in the velocity of the object with respect to time. Velocity is nothing but the rate of change of displacement. On the other hand, acceleration is the rate of change of velocity with respect to time.

Explanation:

Answer:

d. 25 ms

Explanation:

       [tex]\tau_{1} = R_{1} *C_{1} = 5 ms (1)[/tex]

       [tex]\tau_{2} =10* R_{1} *0.5*C_{1} = 5*(R_{1}* C_{1}) = 5* \tau_{1} = 5* 5 ms = 25 ms (2)[/tex]