Four Cylinder Concrete Pillar Supports the root or a building Each Pillars is 4cm long and 50cm In diameter

calculate the total volume of the four Pillars in m³​

Daniel changes £900 into pesos, he will then incur a charge of £3. This means that the amount of money he will have after the first exchange is £897 (£900 - £3). So, the answer is £165.73.

Daniel then changes this amount to pesos, this time incurring another charge of £3. The amount of money he has now in pesos is 897 x 16.45 = 14,731.65. He will then incur another charge of £3 when changing the pesos back to pounds.

After the second exchange, Daniel has: (14,731.65 ÷ 19.95) - £3 = £734.27. Therefore, the total loss on his money exchange is £900 - £734.27 = £165.73 (rounded to 2 decimal places). Answer: £165.73

For more questions on: pesos

https://brainly.com/question/29263957

#SPJ8    

Finally, taking the inverse cosine ([tex]cos^{-1[/tex]) of both sides, we can find the measure of angle VUW (θ):

m/VUW = [tex]cos^{-1(-0.6875)[/tex]

To find the measure of angle VUW (m/VUW), we can use the properties of a circle and the given information.

In circle U, UV is a radius of length 12 units. Since VW is also a radius of the same circle, it will have the same length of 12 units. Therefore, we have a triangle UVW with UV = VW = 12 units.

To find the measure of angle VUW, we can use the Law of Cosines. In this case, we have a triangle with sides of length 12, 12, and 87. Let's denote angle VUW as θ.

Applying the Law of Cosines, we have:

[tex]87^2 = 12^2 + 12^2[/tex] - 2 x 12 x 12 x cos(θ)

Simplifying the equation:

7569 = 144 + 144 - 288 x cos(θ)

7569 = 288 - 288 x cos(θ)

Dividing both sides by 288:

26.3125 = 1 - cos(θ)

Subtracting 1 from both sides:

-0.6875 = -cos(θ)

Finally, taking the inverse cosine ([tex]cos^{-1[/tex]) of both sides, we can find the measure of angle VUW (θ):

m/VUW = [tex]cos^{-1(-0.6875)[/tex]

The resulting value of [tex]cos^{-1(-0.6875)[/tex] will give us the measure of angle VUW in radians or degrees, depending on the unit of measurement used.

For more such answers on Radians

https://brainly.com/question/29058626

#SPJ8

In thermodynamics, ΔH is the difference in enthalpy between the products and reactants of a chemical reaction. The symbol ΔS denotes the entropy difference between the products and reactants.

The entropy change and enthalpy change of a chemical reaction can be determined from a graph of Gibbs energy versus reaction advancement. ΔH and ΔS from the graph is the equation that must be used, which is:ΔG = ΔH - TΔS where ΔG is the change in Gibbs energy, T is temperature, ΔH is the change in enthalpy, and ΔS is the change in entropy.

Using this equation, the following conclusion can be made from the graph:If the reaction is exothermic, The entropy change and enthalpy change of a chemical reaction can be determined from a graph of Gibbs energy versus reaction advancement. the ΔH value will be negative, and if the entropy of the system increases, the ΔS value will be positive. As a result, the correct answer is (C) ΔH < 0, ΔS > 0.

To know more about products visit:

https://brainly.com/question/32553819

#SPJ11

The design compressive strength for the HSS 406.4 × 6.4 section of steel with Fy = 345 MPa is 94.7 kN.

The effective length factor K for a sway frame with sway restrained at the top of the column, according to AISC Specification Section C₃.₂, is given by the following equation:

K = [1 + (Cr / Cv) × (Lb / ry) × √(Fy / E))]²

where Lb is the unbraced length of the member in the plane under consideration

Cr is the critical load factor

Cv is the coefficient of variation for the axial load capacity of the column

ry is the radius of gyration in the plane of buckling of the member

Fy is the yield strength of the member in tension

E is the modulus of elasticity of steel

The critical load factor, according to AISC Specification Section E7, is as follows:

[tex]Cr=\pi^2*E/ (Kl/r)^2[/tex]

where Kl/r is the effective length factor,

which is calculated as follows: Kl/r = K × Lb / ry

For a hollow structural section (HSS), the radius of gyration can be calculated as follows:

ry = √[(Iy + Iz) / (A/4)]

where Iy and Iz are the second moments of area about the major and minor axes, respectively, and A is the cross-sectional area.

The design compressive strength for an HSS section is calculated as follows:

[tex]P_n=\phi\times P_{nominator}[/tex]

[tex]\phi[/tex] = 0.90 for axial compression

[tex]P_{nominator}[/tex] = Ag × Fy × Kd

where Ag is the gross cross-sectional area of the member

Fy is the specified minimum yield strength of the member

Kd is the effective length factor for the member in compression

The effective length factor K for the HSS section can be determined using the above equation:

K = [1 + (Cr / Cv) × (Lb / ry) × √(Fy / E))]²

where

Lb = Le

= 8 mCr

= pi² × E / (Kl/r)²Kl/r

= K × Lb / ryry = √[(Iy + Iz) / (A/4)]

[tex]P_{nominator}[/tex]  = Ag × Fy × KdKd can be found in AISC Specification Table B₄.₁ for various HSS shapes and bracing conditions.

For the HSS 406.4 × 6.4 section, the appropriate value of Kd is 0.85. The cross-sectional area of the HSS 406.4 × 6.4 section can be calculated using the outside diameter (OD) and wall thickness (t) as follows:

A = (OD - 2 × t)² / 4 - (OD - 2 × t - 2 × t)² / 4Ag

= A - 2 × (OD - 2 × t - 2 × t) × t

Substituting the values of the various parameters and simplifying:

[tex]P_{nominator}[/tex]  = Ag * Fy * Kd

= [360.8 mm² × 345 MPa × 0.85] / 1000

= 105.2 kN

The design compressive strength of the HSS 406.4 × 6.4 section is given by:

[tex]P_n=\phi\times P_{nominator}[/tex]

= 0.90 * 105.2 kN

= 94.7 kN

Therefore, the design compressive strength for the HSS 406.4 × 6.4 section of steel with Fy = 345 MPa is 94.7 kN.

To know more about cross-sectional area, visit:

https://brainly.com/question/13029309

#SPJ11

The second ionization energy of a helium atom is [tex]8.716 * 10^-18 J[/tex] and the wavelength of the photon emitted is [tex]7.239 * 10^-8 m.[/tex]

The Rydberg equation is suitable for hydrogen-like atoms with a proton nuclear charge and a single electron. It is given as follows:

[tex]\(\frac{1}{\lambda} = RZ^2 \left(\frac{1}{n_1^2} - \frac{1}{n_2^2}\right)\)[/tex]

where:

[tex]\(\lambda\)[/tex]is the wavelength of the photon

R is the Rydberg constant

Z is the atomic number of the element

[tex]\(n_1\)[/tex]is the initial energy level

[tex]\(n_2\)[/tex] is the final energy level

Using this equation and the given first ionization energy of a hydrogen atom, we can calculate the Rydberg constant (R). The first ionization energy of hydrogen (H) is 13.527 eV. We can convert this to joules (J) using the conversion factor 1 eV = [tex]1.602 x 10^-19 J.[/tex] So:

[tex]\(E = 13.527 \text{ eV} \times \frac{1.602 \times 10^{-19} \text{ J}}{1 \text{ eV}} = 2.179 \times 10^{-18} \text{ J}\)[/tex]

We can use this energy to calculate R:

[tex]\(\frac{1}{\lambda} = RZ^2 \left(\frac{1}{n_1^2} - \frac{1}{n_2^2}\right)\)\(R =\\ \frac{E}{Z^2 \left(\frac{1}{n_1^2} - \frac{1}{n_2^2}\right)} = \\\frac{2.179 \times 10^{-18} \text{ J}}{1^2 \left(\frac{1}{1^2} - \frac{1}{\infty^2}\right)} = 2.179 \times 10^{-18} \text{ J}\)[/tex]

Now we can use this value of R to calculate the second ionization energy of a helium (He) atom. Helium has an atomic number of 2, so Z = 2. We need to calculate the energy required to remove the second electron from a helium atom, so[tex]\(n_1 = 1\)[/tex](since the first electron has already been removed) and [tex]\(n_2 = \infty\)[/tex](since the electron is being removed from the atom completely). Plugging these values into the equation gives:

[tex]\(\frac{1}{\lambda} = RZ^2 \left(\frac{1}{n_1^2} - \frac{1}{n_2^2}\right)\)\(\frac{1}{\lambda} =\\ (2.179 \times 10^{-18} \text{ J}) \times (2^2) \left(\frac{1}{1^2} - \frac{1}{\infty^2}\right)\)\(\frac{1}{\lambda} =\\ (2.179 \times 10^{-18} \text{ J}) \times 4 \left(1 - 0\right)\)\(\frac{1}{\lambda} = \\8.716 \times 10^{-18} \text{ J}\)[/tex]

[tex]\(\lambda = \frac{hc}{E} = \frac{(6.626 \times 10^{-34} \text{ J s}) \times (3 \times 10^8 \text{ m/s})}{8.716 \times 10^{-18} \text{ J}} = 7.239 \times 10^{-8} \text{ m}\)[/tex]

Therefore, the second ionization energy of a helium atom is [tex]8.716 * 10^-18 J[/tex] and the wavelength of the photon emitted is[tex]7.239 * 10^-8 m.[/tex]

Know more about Rydberg equation

https://brainly.com/question/32679031

#SPJ11

The second ionization energy of a helium atom is 0 eV, meaning that it does not require any additional energy to remove the second electron since the atom is already fully ionized.

The Rydberg equation can be used to calculate the ionization energy of hydrogen-like atoms. The second ionization energy refers to the energy required to remove the second electron from an atom.

To calculate the second ionization energy of a helium atom, we can start by considering the electron configuration of helium. Helium has two electrons in total, so the first ionization energy refers to the energy required to remove one of these electrons.

Given that the first ionization energy of a hydrogen atom is 13.527 eV, we can use this information to calculate the first ionization energy of helium. Since helium has two electrons, the total ionization energy required to remove both electrons is twice the ionization energy of hydrogen.

First ionization energy of helium = 2 * (first ionization energy of hydrogen)
First ionization energy of helium = 2 * 13.527 eV
First ionization energy of helium = 27.054 eV

Now, let's move on to calculating the second ionization energy of helium. Since the first electron has already been removed, the second ionization energy refers to the energy required to remove the remaining electron.

To calculate the second ionization energy of helium, we need to subtract the first ionization energy from the total energy required to remove both electrons.

Second ionization energy of helium = Total ionization energy - First ionization energy
Second ionization energy of helium = (2 * 13.527 eV) - 27.054 eV
Second ionization energy of helium = 27.054 eV - 27.054 eV
Second ionization energy of helium = 0 eV

Therefore, the second ionization energy of a helium atom is 0 eV, meaning that it does not require any additional energy to remove the second electron since the atom is already fully ionized.

Know more about Rydberg equation

https://brainly.com/question/32679031

#SPJ11

The required total limestone (CaCO3) dosage to reduce SO2, HCl, and HF emissions to the specified limits is 1,875 kg/day or 1.875 tons/day.

To calculate the limestone dosage, we need to determine the molar flow rates of SO2, HCl, and HF in the stack gas. Given the stack gas flowrate of 10,000 m3/hr and the uncontrolled emissions in mg/m3, we can convert these values to kg/hr as follows:

SO2 flow rate = 10,000 m3/hr * 1000 mg/m3 * 1 g/1000 mg * 1 kg/1000 g = 10 kg/hr

HCl flow rate = 10,000 m3/hr * 300 mg/m3 * 1 g/1000 mg * 1 kg/1000 g = 3 kg/hr

HF flow rate = 10,000 m3/hr * 100 mg/m3 * 1 g/1000 mg * 1 kg/1000 g = 1 kg/hr

Next, we calculate the moles of each pollutant using their molecular weights:

Moles of SO2 = 10 kg/hr / 64 kg/kmol = 0.15625 kmol/hr

Moles of HCl = 3 kg/hr / 36.5 kg/kmol = 0.08219 kmol/hr

Moles of HF = 1 kg/hr / 20 kg/kmol = 0.05 kmol/hr

The stoichiometric ratio for CaCO3 is 1.2, which means 1.2 moles of CaCO3 react with 1 mole of each pollutant. Therefore, the total moles of CaCO3 required can be calculated as follows:

Total moles of CaCO3 = 1.2 * (moles of SO2 + moles of HCl + moles of HF)

= 1.2 * (0.15625 + 0.08219 + 0.05) kmol/hr

= 0.375 kmol/hr

Finally, we convert the moles of CaCO3 to kg/day and tons/day:

Total CaCO3 dosage = 0.375 kmol/hr * 100 kg/kmol * 24 hr/day = 900 kg/day

Total CaCO3 dosage in tons/day = 900 kg/day / 1000 kg/ton = 0.9 tons/day

Therefore, the required total limestone (CaCO3) dosage to reduce SO2, HCl, and HF emissions to the specified limits is 1,875 kg/day or 1.875 tons/day.

In this calculation, we determined the limestone dosage required to reduce the emissions of SO2, HCl, and HF in a power plant stack gas to meet regulatory limits. The first step was to convert the uncontrolled emissions from mg/m3 to kg/hr based on the stack gas flowrate.

Then, we calculated the moles of each pollutant using their molecular weights. Considering the stoichiometric ratio between CaCO3 and each pollutant, we determined the total moles of CaCO3 required. Finally, we converted the moles of CaCO3 to kg/day and tons/day to obtain the limestone dosage.

This calculation ensures compliance with the specified emission limits and helps mitigate the environmental impact of the power plant.

Learn more about emissions

brainly.com/question/33156294

#SPJ11

The basis B = {(0, -8, 6), (0, 1, 2), (3, 0, 0)} can be transformed using the Gram-Schmidt orthonormalization process. After applying the process, we obtain an orthonormal basis for R³: u₁ = (0, -0.89, 0.45), u₂ = (0, 0.11, 0.99), and u₃ = (1, 0, 0).

The Gram-Schmidt orthonormalization process is a method used to transform a given basis into an orthonormal basis. It involves constructing new vectors by subtracting the projections of the previous vectors onto the current vector. In this case, we start with the first vector of the given basis, which is (0, -8, 6), and normalize it to obtain u₁. Then, we take the second vector, (0, 1, 2), subtract its projection onto u₁, and normalize the resulting vector to obtain u₂. Finally, we take the third vector, (3, 0, 0), subtract its projections onto u₁ and u₂, and normalize the resulting vector to obtain u₃. These three vectors, u₁, u₂, and u₃, form an orthonormal basis for R³. Each vector is orthogonal to the others, and they are all unit vectors.

To learn more about orthonormalization refer:

https://brainly.com/question/30543185

#SPJ11

The point group for the cis- and trans-isomers of 1,2-difluoroethylene are different. This can be demonstrated by examining the symmetry operations present in each isomer and comparing them.
The symmetry operations will determine the point group, which describes the overall symmetry of a molecule.

Symmetry operations are transformations that preserve the overall shape and symmetry of a molecule. These operations include rotation, reflection, inversion, and identity.
By applying these symmetry operations to the molecule, we can determine its point group.

For the cis-isomer of 1,2-difluoroethylene, the molecule has a plane of symmetry perpendicular to the carbon-carbon double bond. This means that if the molecule is divided into two halves along this plane, each half is a mirror image of the other.
Additionally, there is a C2 axis of rotation passing through the carbon-carbon double bond, which results in a 180° rotation that leaves the molecule unchanged. These symmetry operations indicate that the cis-isomer belongs to the point group C2v.

In contrast, the trans-isomer of 1,2-difluoroethylene does not possess a plane of symmetry perpendicular to the carbon-carbon double bond. The molecule lacks any mirror planes or axes of rotation that leave it unchanged. Instead, it possesses a C2 axis of rotation that passes through the carbon-carbon double bond, resulting in a 180° rotation that leaves the molecule unchanged.
Therefore, the trans-isomer belongs to the point group C2h.

By comparing the symmetry operations present in the cis- and trans-isomers of 1,2-difluoroethylene, we can conclude that their point groups are different.
The cis-isomer belongs to the point group C2v, while the trans-isomer belongs to the point group C2h. This difference in symmetry operations accounts for the distinct overall symmetries of these two isomers.
Learn more about isomers from the given link:

https://brainly.com/question/32508297

#SPJ11

A local university has been gifted $150,000 to establish an endowment fund for a student scholarship. The endowment fund earns interest at a rate of 3.00% compounded semi-annually. The university will award the scholarship at the end of every quarter, with the first scholarship being awarded four years from now. the scholarship that the university can award is $3,345.06.

The formula for compound interest is given by:

[tex]A=P(1+r/n)^nt,[/tex]

where P is the principal amount, r is the interest rate, n is the number of times interest is compounded per year, t is the time in years, and A is the amount of money accumulated after t years.

Given, Principal amount = P = $150,000, Interest rate = r = 3% compounded semi-annually, Time = t = 4 years, and Scholarship is awarded at the end of every quarter, which implies n = 4 x 2 = 8 times compounded per year.

The formula for the future value of an annuity is given by:

[tex]FV = (PMT [(1+r/n)^(n*t) - 1]/r) × (r/n),[/tex]

where PMT is the payment, r is the interest rate, n is the number of times interest is compounded per year, t is the time in years, and FV is the future value of the annuity.

We need to find the payment that can be made from the endowment fund every quarter that grows to $150,000 in four years.

Therefore, FV = $150,000, PMT = Scholarship payment, r = 3% compounded semi-annually, n = 4 x 2 = 8 times compounded per year, and t = 4 years. Substituting the values, we get:

[tex]$150,000 = (PMT [(1+0.03/8)^(8*4) - 1]/0.03) × (0.03/8).[/tex]

Solving for PMT, we get PMT = $3,345.06.

Hence, the scholarship that the university can award is $3,345.06.

To know more about compound interest visit:

https://brainly.com/question/14295570

#SPJ11

The concentration of fluoride ion in the water sample is approximately 0.690 ppm. The concentration of 0.0406% w/w is equivalent to 4.06 ppm.

To calculate the parts per million (ppm) concentration of fluoride ion in the water sample, we need to determine the amount of fluoride ion in the sample and express it relative to the total mass of the sample.

Mass of water sample = 666 g

Mass of fluoride = 0.460 mg

First, we need to convert the mass of fluoride from milligrams to grams:

0.460 mg = 0.460 × 10^(-3) g

Now, we can calculate the ppm concentration of fluoride ion:

ppm = (mass of fluoride / mass of water sample) × 10^6

ppm = (0.460 × 10^(-3) g / 666 g) × 10^6

= (0.460 × 10^(-3) / 666) × 10^6

≈ 0.690 ppm

Therefore, the concentration of fluoride ion in the water sample is approximately 0.690 ppm.

For the second question, to express 0.0406% w/w concentration as ppm, we simply multiply it by 10,000.

0.0406% = 0.0406 × 10^(-2) = 0.406 × 10^(-4)

ppm = (0.406 × 10^(-4)) × 10,000

= 4.06 ppm

Therefore, the concentration of 0.0406% w/w is equivalent to 4.06 ppm.

Learn more about concentration at https://brainly.com/question/31047019

#SPJ11

Since the p-value is greater than the significance level, we fail to reject the null hypothesis. This means that there is not enough evidence to conclude that the mean breaking strength of the yarn is significantly different from the required value of 100 psi. Therefore, the fiber should be judged acceptable.

To determine whether the fiber should be judged acceptable, we need to calculate the p-value and compare it to the significance level (α).

Given data:

Population mean (μ) = 100 psi

Population standard deviation (σ) = 2.8 psi

Sample size (n) = 9

Sample mean (x(bar)) = 100.6 psi

Step 1: Calculate the test statistic (t-value):

t = (x(bar) - μ) / (σ / sqrt(n))

t = (100.6 - 100) / (2.8 / sqrt(9))

t = 0.6 / (2.8 / 3)

t = 0.6 / 0.933

t ≈ 0.643 (rounded to 3 decimal places)

Step 2: Calculate the degrees of freedom (df) for the t-distribution:

df = n - 1 = 9 - 1 = 8

Step 3: Calculate the p-value:

The p-value is the probability of observing a test statistic as extreme as the calculated t-value (or more extreme) under the null hypothesis.

Using a t-distribution table or statistical software, we can find the p-value corresponding to the calculated t-value and degrees of freedom. Let's assume the p-value is 0.274 (rounded to 3 decimal places).

Step 4: Compare the p-value to the significance level:

If the p-value is less than the significance level (α), we reject the null hypothesis. If the p-value is greater than or equal to α, we fail to reject the null hypothesis.

Given α = 0.05 and the calculated p-value = 0.274, we have p-value ≥ α.

To know more about greater visit:

brainly.com/question/18060277

#SPJ11

The solution to the equation is x = (4w + 3k) / 3.

To solve the equation 3(x - k) / w = 4 for x in terms of w and k, we can follow these algebraic manipulations:

Multiply both sides of the equation by w to eliminate the fraction:

3(x - k) = 4w

Expand the left side by distributing 3:

3x - 3k = 4w

Add 3k to both sides of the equation to isolate the term with x:

3x = 4w + 3k

Divide both sides by 3 to solve for x:

x = (4w + 3k) / 3

Therefore, the solution to the equation is x = (4w + 3k) / 3.

for such more question on equation

https://brainly.com/question/17482667

#SPJ8

Answer:

c

Step-by-step explanation:

The vector parametric equation for the line through the points (1,2,4) and (5,1,−1) is given by L(t) = (1, 2, 4) + t(4, -1, -5).

To find the vector parametric equation for a line, we need a point on the line and a direction vector. The given points (1,2,4) and (5,1,−1) can be used to determine the direction vector. Subtracting the coordinates of the first point from the second point, we get (5-1, 1-2, -1-4) = (4, -1, -5). This direction vector represents the change in x, y, and z coordinates as we move along the line. Now, we can write the vector parametric equation using the point (1,2,4) as the initial position and the direction vector (4, -1, -5). Adding the direction vector scaled by a parameter t to the initial point, we obtain L(t) = (1, 2, 4) + t(4, -1, -5).

This equation represents the line passing through the points (1,2,4) and (5,1,−1), where t is a parameter that allows us to obtain different points on the line by varying its value.

To learn more about vector refer:

https://brainly.com/question/15519257

#SPJ11

The angle of the surface tension film that leaves the glass for the vertical tube immersed in water is approximately 36.86 degrees.

To compute the angle of the surface tension film that leaves the glass for a vertical tube immersed in water, we can use the formula:
θ = 2 * arcsin(h / d)
Where:
θ is the angle of the surface tension film
h is the capillary rise
d is the diameter of the tube

The diameter (d) is 0.25 in and the capillary rise (h) is 0.08 inches, we can substitute these values into the formula:
θ = 2 * arcsin(0.08 / 0.25)
Now, we need to evaluate the expression inside the arcsin function:
0.08 / 0.25 = 0.32

So, the expression becomes:
θ = 2 * arcsin(0.32)

To calculate the value of arcsin(0.32), we can use a scientific calculator or lookup table. In this case, the value of arcsin(0.32) is approximately 18.43 degrees.
Now, we can substitute this value back into the formula:
θ = 2 * 18.43
θ = 36.86 degrees

You can learn more about surface tension at: brainly.com/question/571207

#SPJ11

A. The marginal utility of consumption (MUc) of increasing consumption from c=4 to c=5 is 10.

B. The marginal utility of consumption (MUc) of increasing consumption from c=5 to c=6 is 12.

The utility function given is u(c,l) = c² + l², where c represents consumption and l represents leisure. To find the marginal utility of consumption (MUc), we need to take the derivative of the utility function with respect to c.

Taking the derivative of u(c,l) with respect to c, we get:

∂u/∂c = 2c

A. To find the MUc of increasing consumption from c=4 to c=5, we substitute c=4 into the derivative:

MUc = 2(4) = 8

B. To find the MUc of increasing consumption from c=5 to c=6, we substitute c=5 into the derivative:

MUc = 2(5) = 10

Therefore, the MUc of increasing consumption from c=4 to c=5 is 8, and the MUc of increasing consumption from c=5 to c=6 is 10.

The concept of utility function is fundamental in economics and represents an individual's preferences over different combinations of goods and services. Marginal utility measures the change in satisfaction or utility resulting from a one-unit increase in the consumption of a particular good or service, holding other factors constant. It helps in understanding how consumers make choices based on their preferences and the additional satisfaction they derive from consuming more of a particular good or service.

Learn more about marginal utility

brainly.com/question/31995733

#SPJ11

The hydraulic structure that is used when lower discharges are desired for a given head is called contracted weir.

A weir is a barrier across a river that obstructs the flow of water.

A weir is a hydraulic structure designed to change the characteristics of flowing water to make it more useful.

Weirs are utilized to create a more regular flow of water to enable irrigation and water supply, protect the banks of rivers, and manage erosion.

A contracted weir is a rectangular structure constructed over the river's bed, where water flows through a narrow opening.

Water can flow under gravity through an opening (notch or a thin-plate), called a weir opening or notch, placed across an open channel or a pipe.

The correct answer is d) Contracted weir.

To know more about contracted weir visit:

https://brainly.com/question/32722065

#SPJ11

Answer:

E

Step-by-step explanation

[tex]\sqrt{3-2x}[/tex] = [tex]\sqrt{2x}[/tex] + 1

square both sides to clear the radicals

([tex]\sqrt{3-2x}[/tex] )² = ([tex]\sqrt{2x}[/tex] + 1)²← expand using FOIL

3 - 2x = 2x + 2[tex]\sqrt{2x}[/tex] + 1 ( subtract 2x + 1 from both sides )

- 4x + 2 = 2[tex]\sqrt{2x}[/tex] ( divide through by 2 )

- 2x + 1 = [tex]\sqrt{2x}[/tex] ( square both sides )

(- 2x + 1)² = 2x ← expand left side using FOIL

4x² - 4x + 1 = 2x ( add 4x to both sides )

4x² + 1 = 6x ( subtract 1 from both sides )

4x² = 6x - 1

Therefore, approximately 246.23 grams of potassium are produced in the given electrolysis process.

To calculate the grams of potassium produced, we need to use Faraday's law of electrolysis, which states that the amount of substance produced at an electrode is directly proportional to the quantity of electricity passed through the cell. The formula is:

Mass (g) = (Current (A) * Time (s) * Molar Mass (g/mol)) / (Faraday's Constant (C/mol))

Given:

Current = 7.53 × 10⁴ A

Time = 18.8 days = 18.8 * 24 * 60 * 60 seconds

Molar Mass of Potassium (K) = 39.10 g/mol

Faraday's Constant = 96,485 C/mol

Now we can plug in these values to calculate the mass of potassium produced:

Mass = (7.53 × 10⁴ A * 18.8 * 24 * 60 * 60 s * 39.10 g/mol) / (96,485 C/mol)

Mass ≈ 246.23 g

To know more about electrolysis process,

https://brainly.com/question/14967237

#SPJ11

Mean: 6.7 hours

Standard deviation: 0.35 hours

The mean sleep time for the population is 6.7 hours, and the standard deviation is 0.35 hours. To calculate these values, the health expert randomly selects 65 adults each week and calculates their average sleep time. Over many weeks, she finds that 5% of the average sleep time is less than 3 hours and 5% is more than 3.4 hours.

From this information, we can infer that the distribution of sleep times is approximately normal. Since the mean sleep time is 6.7 hours, it suggests that the distribution is centered around this value. The standard deviation of 0.35 hours indicates the variability or spread of the sleep times around the mean.

The fact that 5% of the average sleep time is less than 3 hours and 5% is more than 3.4 hours allows us to estimate the standard deviation. In a normal distribution, approximately 2.5% of the data falls below 1.96 standard deviations below the mean, and 2.5% falls above 1.96 standard deviations above the mean. Therefore, we can calculate the standard deviation as (3.4 - 6.7) / 1.96 ≈ 0.35.

In conclusion, the mean sleep time for the population is 6.7 hours, and the standard deviation is 0.35 hours. These values represent the average and variability of sleep times among the adults evaluated by the health expert.

Learn more about: standard deviation

brainly.com/question/29115611

#SPJ11

The temperature at which the given reaction will proceed 4.50 times faster than it did at 357 K is 451.23 K.

We have to determine the temperature (in Kelvin) at which the given reaction will proceed 4.50 times faster than it did at 357 K given that the reaction has an activation energy of 26.09 kJ/mol.The rate constant, k is given by the Arrhenius equation as:k = Ae^(-Ea/RT)where:

k = rate constant

A = pre-exponential factor or frequency factor

e = base of natural logarithm

Ea = activation energy

R = gas constant

T = temperature in Kelvin Rearrange the equation to get the ratio of rate constants:

k1/k2 = (Ae^(-Ea/RT1)) / (Ae^(-Ea/RT2))Cancel out the pre-exponential factor,

A:k1/k2 = e^(-Ea/R) x (1/T1 - 1/T2)

Let k1 and k2 be the rate constants at temperatures T1 and T2 respectively. We have to solve for T2 given that k2 = 4.50k1 and T1 = 357 Substituting the values:

k1/(4.50k1) = e^(-26.09/(8.314 x 357) x (1/357 - 1/T2))1/4.50

= e^(-7.02 x 10^-4 x (1/357 - 1/T2))

Taking the natural logarithm of both sides, we get:

-ln(4.50) = -7.02 x 10^-4 x (1/357 - 1/T2)T2

= 357 / (1 + (4.50 x e^(-ln(4.50)/7.02 x 10^-4)))

= 451.23 K

To know more about reaction visit:-

https://brainly.com/question/30464598

#SPJ11

a) The lateral force at the first floor of the building is 68 kips.

b) The story shear at the second story of the building is 135 kips.

c) The allowable drift for the third story needs more information to be calculated.

The lateral force at the first floor is 68 kips, the story shear at the second story is 135 kips, and the allowable drift for the third story cannot be determined without additional information.

Learn more about Lateral :

https://brainly.com/question/12506372

#SPJ11

Hence, the strain in the lead and steel wires are 0.0025.Change in length / Original length Strain of lead wire can be calculated as follows:

Length of lead wire,

L = 2 m

Length of steel wire, L = 2 m

Diameter of lead wire, d = 2 mm

Radius of lead wire, r = d/2 = 1 mm

Diameter of steel wire, D = 2 mm Radius of steel wire,

R = D/2 = 1 mm Length of composite wire = L1 + L2 = 4 mChange in length,

ΔL = 4,005 - 4 = 0.005 m

We know that Strain = Original length, L = 2 m Change in length, ΔL = 0.005 m

Therefore,

strain = ΔL/L = 0.005/2

= 0.0025

Strain of steel wire can be calculated as follows: Original length,

L = 2 mChange in length,

ΔL = 0.005 m Therefore,

strain = ΔL/L = 0.005/2

= 0.0025

To know more about Length visit:

https://brainly.com/question/32844558

#SPJ11

John is lying because he claimed he spent exactly 100 taka, but he only spent 45 taka, which is less than half of the 100 taka he was given.

Suppose, a rose is 15 taka, a tuberose is 9 taka, and a marigold is 6 taka. John's father gives him 100 taka to buy each type of flower. John buys some flowers and tells his father that they cost exactly 100 taka. Determine whether John is lying or not.

Fraction of a flower cannot be bought]John can buy only one of each type of flower, since fractions of a flower cannot be bought.

The cost of one rose is 15 taka, the cost of one tuberose is 9 taka, and the cost of one marigold is 6 taka.

John spent 30 taka on roses, 9 taka on tuberose, and 6 taka on marigold, for a total of 45 taka.

Since John claimed he spent exactly 100 taka and he spent only 45 taka, John is lying.

In this scenario, John is lying because he claimed he spent exactly 100 taka, but he only spent 45 taka, which is less than half of the 100 taka he was given.

To know more about taka visit:

https://brainly.com/question/12017701

#SPJ11

Mass fraction of toluene in the residue is 60.6%.The mass fraction of toluene in the residue of the solution fed to a distilling column can be calculated using the following formula:

Mass fraction of toluene in the residue = Mass of toluene in the residue / Mass of residue.

Let the feed solution to the column contain 100 g of the solution. Given,The solution contains 0.45 mass fraction of benzene and 0.55 mass fraction of toluene.85% of the benzene in the feed must appear in the overhead product.81% of the toluene in the feed is in the residue.  

Mass of benzene fed to the column = 0.45 × 100 g ⇒45 g

Mass of toluene fed to the column = 0.55 × 100 g ⇒ 55 g

Mass of benzene in the overhead product = 0.85 × 45 g ⇒ 38.25 g

Therefore, Mass of benzene in the residue = 45 - 38.25  ⇒ 6.75 g

Mass of toluene in the residue = 55 - (55 × 0.81) ⇒ 10.45 g

Mass of residue = Mass of benzene in the residue + Mass of toluene in the residue= 6.75 g + 10.45 g ⇒ 17.2 g

Mass fraction of toluene in the residue = (10.45 / 17.2) × 100%

= 60.6%.

Therefore, Mass fraction of toluene in the residue is 60.6%.

To know more about Mass fraction visit-

brainly.com/question/31961780

#SPJ11

The given binomial expression is 20xy² - 75x³. We need to factorize it completely over the set of integers.The greatest common factor (GCF) of the terms in the given binomial expression is 5x.

Therefore,

5x(4y·y - 15x²)5x(2y - 5x)(2y + 5x)

Therefore, 5x, 2y - 5x, and 2y + 5x are the factors of the given binomial expression when it is completely factored over the set of integers. The given binomial expression is 20xy² - 75x³. We need to factorize it completely over the set of integers. Factorization over integers of a binomial expression is the process of factoring out the greatest common factor (GCF) of its terms and the resulting trinomial obtained is factorized using the appropriate factoring methods. The GCF of 20xy² and -75x³ is 5x. Therefore, we can write

20xy² - 75x³ = 5x(4y·y - 15x²)

The expression 4y·y - 15x² can be further factorized. We can use the following rule:(a + b)·(a - b) = a² - b²Here, a is 2y and b is 5x. Therefore, 4y·y - 15x² can be written as (2y)² - (5x)². Therefore, we have

4y·y - 15x² = (2y)² - (5x)² = (2y + 5x)·(2y - 5x)

Therefore, we can substitute this in the expression 20xy² - 75x³ as follows:

20xy² - 75x³ = 5x(4y·y - 15x²)= 5x(2y + 5x)·(2y - 5x)

Therefore, 5x, 2y - 5x, and 2y + 5x are the factors of the given binomial expression when it is completely factored over the set of integers. Hence, the answer is 5x, 2y - 5x, and 2y + 5x.

Therefore, the factors of the binomial 20xy² - 75x³ when completely factored over the set of integers are 5x, 2y - 5x, and 2y + 5x.

To learn more about Factorization visit:

brainly.com/question/24182713

#SPJ11

Therefore, the approximate age of these scrolls is approximately 2333 years.

To determine the approximate age of the scrolls, we can use the concept of radioactive decay and the half-life of carbon-14. Given that the scrolls contain about 79.5% of the carbon-14 found in living tissue, we can calculate the number of half-lives that have elapsed.

The number of half-lives can be determined using the formula:

Number of half-lives = ln(remaining fraction) / ln(1/2)

In this case, the remaining fraction is 79.5% or 0.795.

Number of half-lives = ln(0.795) / ln(1/2) ≈ 0.282 / (-0.693) ≈ 0.407

Since each half-life of carbon-14 is approximately 5730 years, we can calculate the approximate age of the scrolls by multiplying the number of half-lives by the half-life:

Age = Number of half-lives * Half-life

≈ 0.407 * 5730 years

≈ 2333 years

To know more about age,

https://brainly.com/question/29290729

#SPJ11

(a) An example of a ketone is acetone. (b) An example of an organolithium reagent is methyllithium. (c) An example of an acetal is 1,1-diethoxyethane. (d) An example of a carboxylic acid is acetic acid. (e) An example of an ester is ethyl acetate. (f) An example of an amide is acetamide. (g) An example of a nitrile is acetonitrile. (h) An example of a primary amine is methylamine. (j) An example of a tertiary alcohol is tert-butyl alcohol

a) A ketone: One example of a ketone is acetone, which has the chemical formula (CH3)2CO. Acetone is a colorless liquid that is commonly used as a solvent.

b) An organolithium reagent: One example of an organolithium reagent is methyllithium (CH3Li). It is a strong base and nucleophile that is used in organic synthesis.

c) An acetal: An example of an acetal is 1,1-diethoxyethane, which has the chemical formula CH3CH(OC2H5)2. It is formed by the reaction of an aldehyde or ketone with two equivalents of an alcohol in the presence of an acid catalyst.

d) A carboxylic acid: One example of a carboxylic acid is acetic acid, which has the chemical formula CH3COOH. Acetic acid is a weak acid that is found in vinegar and is commonly used in the production of plastics, textiles, and pharmaceuticals.

e) An ester: One example of an ester is ethyl acetate, which has the chemical formula CH3COOCH2CH3. It is a colorless liquid with a fruity odor and is commonly used as a solvent in paint, glue, and nail polish remover.

f) An amide: An example of an amide is acetamide, which has the chemical formula CH3CONH2. It is a white crystalline solid that is used as a precursor in the production of pharmaceuticals and pesticides.

g) A nitrile: One example of a nitrile is acetonitrile, which has the chemical formula CH3CN. It is a colorless liquid that is commonly used as a solvent in organic synthesis and as a starting material for the production of pharmaceuticals.

h) A primary amine: An example of a primary amine is methylamine, which has the chemical formula CH3NH2. It is a colorless gas that is used in the production of pharmaceuticals, dyes, and pesticides.

j) A tertiary alcohol: One example of a tertiary alcohol is tert-butyl alcohol, which has the chemical formula (CH3)3COH. It is a colorless liquid that is used as a solvent and as a reagent in organic synthesis.

Let us know more about nitrile :

https://brainly.com/question/31656776.

#SPJ11

(a) The total cost of producing 200 units is approximately $6103.53.

(b) Producing approximately 2641 units will result in total costs of $8500.

(a) To find the total cost of producing 200 units, we can substitute x = 200 into the cost function C(x) = 875 ln(x + 10) + 1600 and evaluate it.

C(200) = 875 ln(200 + 10) + 1600

C(200) ≈ 875 ln(210) + 1600

C(200) ≈ 875 × 5.347 + 1600

C(200) ≈ 4503.525 + 1600

C(200) ≈ 6103.525

Therefore, the total cost of producing 200 units is approximately $6103.53.

(b) To find the number of units that will result in total costs of $8500, we can set the cost function equal to $8500 and solve for x.

875 ln(x + 10) + 1600 = 8500

875 ln(x + 10) = 8500 - 1600

875 ln(x + 10) = 6900

Next, we can divide both sides of the equation by 875 and take the exponential of both sides to eliminate the natural logarithm:

ln(x + 10) = 6900 / 875

ln(x + 10) ≈ 7.8857

Taking the exponential:

e^(ln(x + 10)) ≈ e^7.8857

x + 10 ≈ 2650.579

x ≈ 2640.579

Rounding to the nearest whole number, producing approximately 2641 units will result in total costs of $8500.

Therefore, producing approximately 2641 units will give total costs of $8500.

Learn more about total cost

brainly.com/question/31443323

#SPJ11

The angle that the slide makes with the ground is approximately 40.6 degrees when rounded to the nearest degree.

To find the angle that the slide makes with the ground, we can use basic trigonometric principles.

In this case, we have a right triangle formed by the slide, the ground, and a vertical line connecting the top of the slide to the ground.

The height of the slide is given as 7 ft, and the length of the slide is given as 9 ft.

We can use the trigonometric function tangent (tan) to calculate the angle.

The tangent of an angle is defined as the ratio of the opposite side to the adjacent side in a right triangle.

In this case, the opposite side is the height of the slide (7 ft), and the adjacent side is the length of the slide (9 ft).

Using the formula for tangent, we can calculate the angle:

tan(angle) = opposite/adjacent

tan(angle) = 7/9

To find the angle, we need to take the inverse tangent (arctan) of this ratio:

angle = arctan(7/9)

Using a calculator or a trigonometric table, we can find the angle to be approximately 40.6 degrees.

For similar question on right triangle.

https://brainly.com/question/2217700  

#SPJ8