List the name of the division that has employee(s) working on a project not sponsored by the division.
To formulate this query, we can use a combination of join, subquery, and a correlated subquery, along with the WHERE clause to filter the results. Here's how we can approach it:
1. Start by selecting the division name (dname) from the "division" table.
2. Join the "division" table with the "employee" table using the division ID (did) as the common attribute.
3. Join the "employee" table with the "works_on" table using the employee ID (eid) as the common attribute.
4. Join the "works_on" table with the "project" table using the project ID (pid) as the common attribute.
5. In the WHERE clause, add a condition to check if there exists an employee (e1) in the division (d) who is working on a project (p) that is not sponsored by the same division. This can be done using a correlated subquery.
- In the subquery, select any employee (e2) from the same division (d) who is working on a project (p2) that is sponsored by the division (d).
- Include the condition "WHERE d.did <> p2.did" to ensure that the project is not sponsored by the division.
- Link the subquery to the outer query using the division ID (did).
- Add the condition "AND d.did <> p.did" to check that the project the employee is working on is not sponsored by the division itself.
6. Use the GROUP BY clause to group the results by division name (dname).
7. Optionally, you can use the HAVING clause to further filter the results if needed.
The resulting query will provide the names of the divisions that have employees working on projects not sponsored by their respective divisions.
Learn more about project here :-
https://brainly.com/question/28476409
#SPJ11
data for a kaplan turbine is given as follows; head=5m & flow rate of water =120m³/s; runner speed=120rev/min; runner diameter =5m; hub tip ratio of the runner=0.4; runner blade angle of entry =60⁰; overall efficiency =80%. exit from the runner is axial. calculate the; a power b)specific speed c) exit angle of the inlet guide vanes d) exit angle of runner blades; and e)hydraulic efficiency
a) Power:
The power output of the turbine can be calculated using the following formula:
Power = (Head × Flow rate × Gravity) / Overall efficiency
Where gravity is the acceleration due to gravity (approximately 9.81 m/s²).
Substituting the given values:
Power = (5 m × 120 m³/s × 9.81 m/s²) / 0.8
Power ≈ 9112.5 kW
b) Specific speed:
Specific speed (Ns) is a dimensionless parameter used to characterize the performance of a turbine. It can be calculated using the following formula:
Ns = (N √Q) / H^(3/4)
Where N is the runner speed in revolutions per minute, Q is the flow rate in cubic meters per second, and H is the head in meters.
Substituting the given values:
Ns = (120 rev/min √120 m³/s) / (5 m)^(3/4)
Ns ≈ 774.12
c) Exit angle of the inlet guide vanes:
The exit angle of the inlet guide vanes can be calculated using the following formula:
Exit angle = Blade angle of entry - Hub tip ratio × 90°
Substituting the given values:
Exit angle = 60° - 0.4 × 90°
Exit angle ≈ 24°
d) Exit angle of runner blades:
The exit angle of the runner blades in an axial flow turbine is approximately equal to the exit angle of the inlet guide vanes. Therefore, the exit angle of the runner blades would also be approximately 24°.
e) Hydraulic efficiency:
Hydraulic efficiency (ηh) can be calculated using the following formula:
ηh = (Head × Flow rate × Gravity × Overall efficiency) / (Power / 1000)
Substituting the given values:
ηh = (5 m × 120 m³/s × 9.81 m/s² × 0.8) / (9112.5 kW / 1000)
ηh ≈ 0.537 or 53.7%
To summarize:
a) Power ≈ 9112.5 kW
b) Specific speed ≈ 774.12
c) Exit angle of the inlet guide vanes ≈ 24°
d) Exit angle of runner blades ≈ 24°
e) Hydraulic efficiency ≈ 53.7%
.Consider the following recursive definition of a set S of strings. 1. Any letter in {a,b,c) is in S; 2. If x ∈ S, then xx ∈ S: 3. If x ∈ s, then cx ∈ S Which of the following strings are in S? A) ba B) a C) ca D) cbca E) acac F) X G) cb H) cbcb I) cba J) cbccbc K) aa L) ccbccb M) ccaca N) Occb
The following strings belong to the given set S:
ba, a, ca, cbca, acac, cbcb, cba, cbccbc, aa, ccbccb, ccaca, and Occb.
Explanation:
According to the given recursive definition of a set S of strings, any letter in {a,b,c) is in S, If x ∈ S, then xx ∈ S, and if x ∈ S, then cx ∈ S. Here are the strings belonging to the given set S:
ba (since b and a both belong to {a,b,c})
a (since a belongs to {a,b,c})
ca (since a belongs to {a,b,c}, and c added to a belongs to S)
cbca (since a and c both belong to {a,b,c} and adding them in the order c, b, c, a, respectively belongs to S)
acac (since a and c both belong to {a,b,c} and adding them in the order a, c, a, c respectively belongs to S)
cbcb (since b and c both belong to {a,b,c} and adding them in the order c, b, c, b respectively belongs to S)
cba (since a and c both belong to {a,b,c} and adding them in the order c, b, a respectively belongs to S)
cbccbc (since b and c both belong to {a,b,c} and adding them in the order c, b, c, c, b, c respectively belongs to S)
aa (since a belongs to {a,b,c} and adding a to itself belongs to S)
ccbccb (since b and c both belong to {a,b,c} and adding them in the order c, c, b, c, c, b respectively belongs to S)
ccaca (since a and c both belong to {a,b,c} and adding them in the order c, c, a, c, a respectively belongs to S)
Occb (since b and c both belong to {a,b,c} and adding them in the order c, b, c, c, b, O respectively belongs to S)
Hence, the strings belonging to the given set S are ba, a, ca, cbca, acac, cbcb, cba, cbccbc, aa, ccbccb, ccaca, and Occb.
Learn more about strings here:
https://brainly.com/question/30765679
3SPJ11
(a) Calculate the %1C of the interatomic bond for the intermetallic compound TIA 13 (b) On the basis of this result, what type of interatomic bonding would you expect to be found in TiAlg?%IC
(a) The %1C (ionic character) of the interatomic bond for the intermetallic compound TiA13 can be calculated by using the following equation:%IC = [1 - exp(-0.25(x - y)^2)] x 100where x and y are the electronegativities of the two atoms forming the bond.
For TiA13, Ti has an electronegativity of 1.54, while Al has an electronegativity of 1.61.
Therefore, the %IC for the bond in TiA13 can be calculated as:%IC = [1 - exp(-0.25(1.54 - 1.61)^2)] x 100%IC = 22.0%
Therefore, the bond in TiA13 is expected to be predominantly metallic with some degree of ionic character.
(b) Based on the result of part (a), we can expect the bond in TiAlg to be predominantly metallic with some degree of ionic character.
This is because both Ti and Al are metals, and their electronegativities are relatively close together.
Learn more about interatomic bond here,
https://brainly.com/question/8172625
#SPJ11
Glucose can be broken down to two 3-carbon compound called___and related energy called___
Glucose can be broken down to two 3-carbon compound called pyruvate and related energy called ATP
what is the following product? rootindex 3 startroot 4 endroot times startroot 3 endroot
The product of √3√4 and √3 is equal to √12, which simplifies to 6.
Let's break down the expression step by step.
√3 represents the square root of 3. √4 represents the square root of 4. And √3 represents the square root of 3 again.
To simplify the expression, we can multiply the numbers under the square roots together and then take the square root of the product.
√3 * √4 * √3 = √(3 * 4 * 3)
Multiplying the numbers under the square root gives us:
√(3 * 4 * 3) = √36
The square root of 36 is equal to 6:
√36 = 6
Therefore, the product of √3√4 and √3 is equal to √12, which simplifies to 6.
Learn more about product here:-
https://brainly.com/question/31815585
#SPJ11
Water at = 0.02 kg/s and T-20°C enters an annular region formed by an inner tube of diameter D,- 25 mm and an outer tube of diameter D-100 mm. Saturated steam flows through the inner tube, maintaining its sur- face at a uniform temperature of T, = 100°C. while the outer surface of the outer tube is well insulated. If fully developed conditions may be assumed throughout the annulus, how long must the system be to provide an out- let water temperature of 75°C? What is the heat flux from the inner tube at the outlet?
Water at = 0.02 kg/s and T-20°C enters an annular region formed by an inner tube of diameter D,- 25 mm and an outer tube of diameter D-100 mm, then the heat flux from the inner tube at the outlet is approximately 156452.6 W/m².
We know that, the heat transfer rate is:
Q = [tex]m_{dot} * Cp * (T_{out} - T_{in})[/tex]
Given that:
[tex]m_{dot[/tex] = 0.02 kg/s
Cp = 4186 J/kg°C
Q = 0.02 * 4186 * (75 - 20)
= 0.02 * 4186 * 55
= 4594.4 W
The heat flux can be calculated using the equation:
q = Q / A
L = Q / q
A = π * [tex](D_o^2 - D_i^2)[/tex]
[tex]D_o[/tex] = 100 mm = 0.1 m
[tex]D_i[/tex] = 25 mm = 0.025 m
A = π * ([tex]0.1^2 - 0.025^2[/tex]) = π * (0.01 - 0.000625) = π * 0.009375 ≈ 0.0294 m²
L = Q / q = 4594.4 / (4594.4 / 0.0294) ≈ 0.0294 m
So,
q = Q / A = 4594.4 / 0.0294
=156452.6 W/m²
Thus, the heat flux from the inner tube at the outlet is approximately 156452.6 W/m².
For more details regarding heat flux, visit:
https://brainly.com/question/30763068
#SPJ4
Evidence suggests that discovery learning is not effective in improving observer's performance.
T/F
T (True). Evidence suggests that discovery learning is not effective in improving observer's performance.
Evidence from research studies indicates that discovery learning, where learners explore and discover concepts or solutions on their own, may not be as effective in improving observer's performance compared to other instructional methods. Some studies have found that guided instruction, which provides explicit guidance and support, leads to better learning outcomes and performance than discovery learning alone. Guided instruction helps learners acquire foundational knowledge and skills before engaging in more independent exploration. While discovery learning can have benefits in certain contexts and for specific learning objectives, research suggests that a balanced approach combining both guided instruction and opportunities for independent exploration may be more effective in promoting learning and improving performance.
Know more about research studies here:
https://brainly.com/question/28487173
#SPJ11
(1 objective and 2 constraints) con-rods for high performance engines. Objective function: Constraint function 1 for "must not fail by high-cycle fatigue": Constraint function 2 for "must not fail by elastic buckling": Combine objective function and constraint function 1 to get performance equation 1 (ml): Define Material Index 1 (MI) to minimize: Combine objective function and constraint function 2 to get performance equation 2 (m2): Define Material Index 2 (M2) to minimize:
The given information outlines the objective of optimizing the performance of con-rods for high-performance engines and the constraints related to high-cycle fatigue and elastic buckling. However, the precise formulations of the objective function, performance equations, and material indices are not provided, making it difficult to provide further details or calculations.
Objective Function:
The objective function for designing con-rods for high-performance engines is to optimize their performance. However, the specific details of the objective function are not provided in the given text.
Constraint Function 1 - "Must not fail by high-cycle fatigue":
This constraint ensures that the con-rods should be able to withstand high-cycle fatigue without failure. High-cycle fatigue refers to the repeated stress cycles experienced by the con-rods during engine operation. The constraint function sets a limit on the maximum stress that the con-rods can endure without failure.
Performance Equation 1 (m1):
The performance equation 1, denoted as m1, combines the objective function (not explicitly mentioned) and constraint function 1 for high-cycle fatigue. The exact formulation of this equation is not provided in the given text.
Material Index 1 (MI):
Material Index 1 (MI) is defined to minimize the performance equation 1 (m1). It is a design parameter used to optimize the material selection for the con-rods, considering the objective function and the constraint related to high-cycle fatigue. The specific calculation or formula for Material Index 1 is not given.
Constraint Function 2 - "Must not fail by elastic buckling":
This constraint ensures that the con-rods should not fail due to elastic buckling, which is the instability caused by compressive loads. It sets a limit on the critical buckling load or the maximum compressive load that the con-rods can withstand without buckling.
Performance Equation 2 (m2):
The performance equation 2, denoted as m2, combines the objective function (not explicitly mentioned) and constraint function 2 for elastic buckling. The exact formulation of this equation is not provided in the given text.
Material Index 2 (M2):
Material Index 2 (M2) is defined to minimize the performance equation 2 (m2). It is a design parameter used to optimize the material selection for the con-rods, considering the objective function and the constraint related to elastic buckling. The specific calculation or formula for Material Index 2 is not given.
Learn more about elastic buckling here:-
https://brainly.com/question/31655524
#SPJ11
As part of a heat treatment process, cylindrical, 304 stainless steel rods of 100-mm diameter are cooled from an initial temperature of 500 C by suspending them in an oil bath at 30 C. If a convection coefficient of 500 W/m2 K is maintained by circulation of the oil, how long does it take for the centerline of a rod to reach a temperature of 50 C, at which point it is withdrawn from the bath
Answer:
Explanation:
Given that:
diameter = 100 mm
initial temperature = 500 ° C
Conventional coefficient = 500 W/m^2 K
length = 1 m
We obtain the following data from the tables A-1;
For the stainless steel of the rod [tex]\overline T = 548 \ K[/tex]
[tex]\rho = 7900 \ kg/m^3[/tex]
[tex]K = 19.0 \ W/mk \\ \\ C_p = 545 \ J/kg.K[/tex]
[tex]\alpha = 4.40 \times 10^{-6} \ m^2/s \\ \\ B_i = \dfrac{h(\rho/4)}{K} \\ \\ =0.657[/tex]
Here, we can't apply the lumped capacitance method, since Bi > 0.1
[tex]\theta_o = \dfrac{T_o-T_{\infty}}{T_i -T_\infty}} \\ \\ \theta_o = \dfrac{50-30}{500 -30}} \\ \\ \theta_o = 0.0426\\[/tex]
[tex]0.0426 = c_1 \ exp (- E^2_1 F_o_)\\ \\ \\ 0.0426 = 1.1382 \ exp (-10.9287)^2 \ f_o \\ \\ = f_o = \dfrac{In(0.0374)}{0.863} \\ \\ f_o = 3.81[/tex]
[tex]t_f = \dfrac{f_o r^2}{\alpha} \\ \\ t_f = \dfrac{3.81 \times (0.05)^2}{4.40 \times 10^{-6}} \\ \\ t_f= 2162.5 \\ \\ t_f = 36 mins[/tex]
However, on a single rod, the energy extracted is:
[tex]\theta = pcv (T_i - T_{\infty} )(1 - \dfrac{2 \theta}{c} J_1 (\zeta) ) \\ \\ = 7900 \\times 546 \times 0.007854 \times (500 -300) (1 - \dfrac{2 \times 0.0426}{1.3643}) \\ \\ \theta = 1.54 \times 10^7 \ J[/tex]
Hence, for centerline temperature at 50 °C;
The surface temperature is:
[tex]T(r_o,t) = T_{\infty} +(T_1 -T_{\infty}) \theta_o \ J_o(\zeta_1) \\ \\ = 30 + (500-30) \times 0.0426 \times 0.5386 \\ \\ \mathbf{T(r_o,t) = 41.69 ^0 \ C}[/tex]
Which of the following files will be listed by the following UNIX command (select all that apply)? Is [abc]*e* A. aardvark B. ferret C. bonefish D. capybara E. seahorse
The correct options are A. aardvark, C. bonefish, and D. capybara.
The following files that will be listed by the UNIX command [abc]*e* are: aardvark, bonefish and capybara. The UNIX command [abc]*e* searches for the files that match the pattern. The pattern can be formed using wildcards like *, [, ], and ?. The square brackets in a UNIX command are used to specify a range of characters for pattern matching. The asterisk (*) in a UNIX command represents a string of zero or more characters. When used together with the square brackets, * matches zero or more occurrences of any of the characters in the square brackets. In the given UNIX command, [abc]*e* means a file that starts with a, b, or c and ends with e. Hence, the files aardvark, bonefish, and capybara will be listed by this command. The files ferret and seahorse do not match the pattern [abc]*e* because the ferret doesn't start with a, b, or c and seahorse doesn't end with e.
Therefore, the correct options are A. aardvark, C. bonefish, and D. capybara.
know more about UNIX command
https://brainly.com/question/30585049
#SPJ11
explain the following statement: a transaction is a logical unit of work. give an example not in the book and explain it.
In a database management system, a transaction is a logical unit of work.
A transaction is a group of operations that must all succeed or all fail; the database system is in an undefined state if any of the operations fail. Transactions provide reliable consistency for database updates. However, a logical unit of work is a portion of a program that is treated as a single logical unit from the point of view of data updates or queries. The logical unit of work is used in conjunction with transaction management systems to ensure that data updates occur as a single logical unit of work and can be rolled back if any part of the logical unit of work fails. As a result, a transaction is a logical unit of work.
Example: Let's pretend that a student is enrolling in courses. A single transaction would be the entire enrollment process, from logging into the system to selecting courses to registering for them. If any portion of the transaction fails, the entire enrollment process will fail.
Learn more about the logical unit of work at:
brainly.com/question/32344402
#SPJ11
Failure modes and effects analysis tabulates risk priority codes based on:
technical, business, and customer impacts
quantitative measures and qualitative measures
Taguchi and 5-why analysis
severity, occurrence, and detection
Failure modes and effects analysis tabulates risk priority codes based on:
severity, occurrence, and detection
What are Failure modesThe 3 factors for Risk Priority Code in FMEA are Severity (S): measuring impact on tech, business, and customers. Severity is measured via qualitative or numerical scales.
The Likelihood or frequency of failure. Occurrence is evaluated using historical data, expert judgment or statistical analysis and can be rated on a scale from 1-10, with higher numbers indicating more frequent occurrences.
Learn more about Failure modes from
https://brainly.com/question/16201340
#SPJ4
.1. In which of the following page-replacement algorithms a tie may occur between two or more pages eligible for eviction (select all correct answers if any)?
Choice 1 of 4: Optimal
Choice 2 of 4: Second Chance
Choice 3 of 4: Least Recently Used
Choice 4 of 4: Aging
In the page-replacement algorithms, a tie may occur between two or more pages eligible for eviction in the following algorithms: Second Chance, Least Recently Used, and Aging. These are the correct answers.
Below is the detailed information regarding the three page-replacement algorithms.
Second Chance Algorithm
In this algorithm, the idea is to assign each page a chance of a second opportunity and if a page has been referenced previously, it will be given another opportunity, so it will not be removed from memory. Second-chance algorithm allows the page that has been removed from the memory to come back into the memory again.
LRU (Least Recently Used) Algorithm
In the LRU algorithm, the idea is to remove the page that is least recently used. It assumes that the pages that are not used for a longer time are less likely to be used again in the future. So, the page that has not been accessed for the longest time is removed first.
Aging Algorithm
In the Aging algorithm, the idea is to add some time-stamps on the pages that are most recently used. The time-stamp value is inversely proportional to the number of times a page is referenced, so a page that is accessed frequently will have a smaller time-stamp value. At regular intervals, the values are shifted one bit to the right, so the page that has not been accessed for a longer time will eventually be evicted.
So, a tie may occur between two or more pages eligible for eviction in the following algorithms: Second Chance, Least Recently Used, and Aging.
learn more about page-replacement algorithms here:
https://brainly.com/question/32564101
#SPJ11
which of the following is not an event to end a transaction? a. commit b. rollback c. graceful exit of a program d. program is aborted e. all of the above f. none of the above
The event that is not an event to end a transaction is a graceful exit of a program.A graceful exit of a program is not an event to end a transaction.
In computer science, a transaction is a sequence of operations that is executed as a single logical unit of work. A transaction's execution must be completed before the database management system can move on to the next transaction. If the DBMS fails before completing the transaction, it will be rolled back. When a transaction is finished and all modifications have been completed, the COMMIT statement is used to make the transaction permanent. Changes that have been made in the database are irreversible after the COMMIT statement has been executed.
The ROLLBACK statement is used to undo any database changes made during a transaction that has not yet been committed. A ROLLBACK statement will undo all modifications made to the database by a transaction. When a program exits without causing any problems or harm to the system, it is known as a graceful exit. It might happen when a program finishes normally or is terminated by the operating system rather than crashing, as in the case of a segmentation fault or other critical error. A graceful exit from a program is not an event to end a transaction. A transaction is completed by using the commit statement. The rollback statement undoes any database modifications that were made during a transaction.
know more about transaction
https://brainly.com/question/30652221
#SPJ11
Use the given transfer function and identify the correct steady-state response Yss(t) to the given input function 17). T(S) Y(S) FS) = 52+10s+100,f (t) = 16 sin 51 Multiple Choice a. Yss (t) = 0.1775 sin (5t + 0.5880) b. Yss (t) = 0.2775 sin (5t - 0.5880) c. Yss (t) = 0.2775 sin (5t + 0.5880) d. Yss (t) = 0.1775 sin (5t - 0.5880)
The correct steady-state response is option (d) Yss (t) = 0.1775 sin (5t - 0.5880).
Given: T(S) Y(S) = (52+10s+100)F(S), F(S) = 16 sin (5t)
We can determine the steady-state response using the following equation: Yss (t) = lims →0 [sY(s)] ... equation [1].
From the question we have, T(S) Y(S) = (52+10s+100)F(S).
On substituting F(S) = 16 sin (5t) we get, T(S) Y(S) = (52+10s+100) (16/s^2 + 25).
Hence, Y(S) = [(52+10s+100) (16/s^2 + 25)] / T(S) ... equation [2].
We know that T(S) = Y(S)/F(S).
On substituting equations [1] and [2], we get the steady-state response as, Yss (t) = (16 * 100) / (25^2 + 10^2) sin (5t + arctan (-10/25)) Yss (t) = 1.775 sin (5t - 0.588).
Hence, the correct steady-state response is an option (d) Yss (t) = 0.1775 sin (5t - 0.5880).
know more about steady-state response
https://brainly.com/question/31493425
#SPJ11
1. Copper-Rich copper-beryllium alloys are precipitation hardenable. After consulting the portion of the phase diagram, do the following.
a) Specify the range of compositions over which these alloys may be precipitation hardened and
b) briefly describe the heat-treatment process (in terms of temperature) that would be used to precipitation harden an alloy having a composition of your choosing, yet lying within the range given for part a.
Copper-rich copper-beryllium alloys are precipitation hardenable. They have compositions ranging from 0.2 to 2 wt percent beryllium, with copper making up the remaining percentage. The alloys have a high electrical conductivity and are used in the electronics industry.
The following steps can be used to heat-treat an alloy of your choosing that lies within the composition range specified in part a.The range of compositions for which copper-rich copper-beryllium alloys can be precipitation hardened is from 0.2 to 2 wt percent beryllium, with the rest being copper. They are widely used in the electronics industry due to their high electrical conductivity. The heat-treatment process can be briefly described as follows: Step 1: Heating the alloy to a temperature range of 315°C to 425°C for 1 to 4 hours. Step 2: Allow the alloy to cool to room temperature or near it. Step 3: Age the alloy at a temperature range of 160°C to 315°C for several hours. The alloy is then removed from the furnace and allowed to cool to room temperature or near it. The result of this heat treatment is the precipitation of an intermetallic compound called CuBe2. This is the cause of the hardening of the alloy.
To know more about hardenable visit:
https://brainly.com/question/31116300
#SPJ11
1) A SM's state actions consist of C statements. The SM's transitions consist of what?
2) A bit that can change over time is called a?
3) A push button operates similar to a siple switch. Both have a pair of electrical contacts and two mechanically controlled states.
A state machine current state exit transitions are checked to see?
5) A state may have what kind of actions?
The SM's transitions consist of conditions or events that determine when and how the state machine transitions from one state to another.
These conditions or events are typically specified using logical expressions, such as if-else statements or switch-case statements, based on the current state and the input received. The transitions define the behavior of the state machine and determine the sequence of states it will traverse based on the specified conditions or events.
Know more about SM's transitions here:
https://brainly.com/question/28317566
#SPJ11
water flows in a cast-iron pipe of 550-mm diameter at a rate of 0.10 m3/s. determine the friction factor for this flow.
For water flowing in a cast-iron pipe of 550 mm diameter at a rate of 0.10 m3/s, the friction factor is 0.0199.
On solving,
Diameter of pipe (D) = 550 mm = 0.55 m
Rate of flow (Q) = 0.1 m³/s.
We know that:
Reynolds number (Re) = (ρ × v × D) / μ,
where, ρ = density of water = 1000 kg/m³, v = velocity of water, μ = dynamic viscosity of water.
From Reynold's number, we can determine the flow pattern whether laminar, turbulent, or transitional.
For laminar flow (Re < 2300),
friction factor f is given by: f = 64 / Re.
For turbulent flow (Re > 4000), friction factor f is determined by using Colebrook's formula which is given by:
1 / √f = -2.0 log [((k / D) / 3.7) + (2.51 / (Re √f))], where k is the roughness height of the pipe material.
Case-1: Flow is laminar:
(Re < 2300 )Reynold's number (Re) = (ρ × v × D) / μ = (1000 × 0.1 × 0.55) / (0.001002) = 549278.44 > 2300
Therefore, the flow is turbulent. We need to use Colebrook's formula.
Case-2: Flow is turbulent (Re > 4000)
For cast-iron pipes, the roughness height (k) is 0.26 mm = 0.00026 m.
Using Colebrook's formula,
1 / √f = -2.0 log [((k / D) / 3.7) + (2.51 / (Re √f))] = -2.0 log [((0.00026 / 0.55) / 3.7) + (2.51 / (54927.84 √f))]
Squared on both sides,
1 / f = 4.0 log² [((0.00026 / 0.55) / 3.7) + (2.51 / (54927.84 √f))]
= 4.0 log² [0.0015908646 + (2.51 / (54927.84 √f))]
Solving for f,f = 0.0199Answer:
The friction factor for this flow is 0.0199.
Learn more about friction factor at:
brainly.com/question/19091153
#SPJ11
If a sinusoidal wave has frequency of 50 Hz with 30 A r.m.s. current which of the following equation represents this wave? (A) 42.42 sin 314t (B) 60 sin 25 t (C) 30 sin 50 t (D) 84.84 sin 25 t 9
Answer:
The equation that represents a sinusoidal wave with a frequency of 50 Hz and an RMS current of 30 A would be:
(C) 30 sin 50t
In this equation, the amplitude of the wave is given by 30, and the frequency is represented by 50t, which corresponds to the given frequency of 50 Hz. Therefore, option (C) is the correct representation of the wave.
Explanation:
The answer is (C) the equation for a sinusoidal wave is given by 30 sin 50 t.
This is because the equation for a sinusoidal wave is given by the formula:
A sin ωt
where
A is the amplitude
ω is the angular frequency
t is the time
For the given wave:
Frequency = 50 Hz
Current = 30 A (r.m.s.)
Therefore, the equation will be of the form:
A sin ωt = 30 sin (2πft)
Where f is the frequency in Hz and ω = 2πf
Therefore,ω = 2π × 50 = 100π
The equation becomes:
30 sin 100πt
Since 100π = 314.16, the equation can also be written as:
30 sin 314t, which is option (C).
Option (A) is incorrect because the amplitude is too high at 42.42, and the angular frequency is too high at 314.
Option (B) is incorrect because the frequency is too low at 25 Hz.
Option (D) is incorrect because the amplitude is too high at 84.84, and the frequency is too low at 25 Hz.
The answer is (C) 30 sin 50 t.
learn more about sinusoidal wave here:
https://brainly.com/question/28449631
#SPJ11
Which of the following is not an advantage of virtualization? o A. Improves portability by allowing the virtual machine to move across hardware seamlessly B. Improves performance by abstracting the various hardware components C. Reduces the burden of management by providing an ease means of creating snapshots O D. Increases security by running the virtual machine as a sandbox O E. Improves the efficiency of hardware by allowing more operating systems to run on the same hardware
The correct answer is option D: Increases security by running the virtual machine as a sandbox. This is not an advantage of virtualization.
Virtualization is a technology that allows you to run multiple operating systems on the same computer. This is done by separating the operating system from the hardware and running it in a virtual environment. Virtualization has many advantages, but there are also some disadvantages. One of the following is not an advantage of virtualization. While virtualization does provide some security benefits, it is not a substitute for a proper security strategy.
In fact, virtualization can actually increase the attack surface of your system if it is not properly configured. Virtualization can be used to improve portability, performance, and efficiency. It allows you to move virtual machines between physical hosts seamlessly, which makes it easy to manage your resources. It also abstracts the hardware, which can improve performance by reducing the overhead of managing the hardware. Virtualization can also be used to improve the efficiency of hardware by allowing more operating systems to run on the same hardware.
Additionally, it can reduce the burden of management by providing an easy means of creating snapshots, which can be used to quickly restore a virtual machine to a previous state if needed.
know more about virtualization.
https://brainly.com/question/31257788
#SPJ11
Write a procedure that produces N values in the Fibonacci number series and stores them in an array of doubleword then display the array to present Fibonacci numbers in hexadecimal (calling the DumpMem method from the Irvine32 library). Input parameters should be a pointer to an array of doubleword, a counter of the number of values to generate. Write a test program that calls your procedure, passing N = 30. The first value in the array will be 1, and the last value will be 832040 (000CB228 h)
The Fibonacci series is a sequence of numbers that starts with 0 and 1, and each subsequent number is the sum of the previous two numbers. In this question, we are supposed to write a procedure that produces N values in the Fibonacci number series.
Stores them in an array of doubleword and then display the array to present Fibonacci numbers in hexadecimal (calling the Dump Mem method from the Irvine32 library).The above code declares an array named arr of 30 doublewords.
It then calls the Fibonacci procedure and passes the address of the array and the length of the array as parameters. Finally, it displays the array in hexadecimal using the DumpMem method from the Irvine32 library.
To know more about Fibonacci visit:
https://brainly.com/question/29764204
#SPJ11
a 503×10−6 f capacitor is discharged through a resistor, whereby its potential difference decreases from its initial value of 94.5 v to 16.3 v in 3.21 s . find the resistance of the resistor.
The resistance of the resistor is approximately 259.4 ohms.
To find the resistance of the resistor, we can use the formula for the discharge of a capacitor in an RC circuit:
V(t) = V0 * e^(-t/RC)
Where:
V(t) is the potential difference at time t
V0 is the initial potential difference
t is the time
R is the resistance
C is the capacitance
We are given:
V0 = 94.5 V (initial potential difference)
V(t) = 16.3 V (potential difference after time t)
t = 3.21 s (time)
C = 503×10^(-6) F (capacitance)
Plugging in the values, we get:
16.3 = 94.5 * e^(-3.21/(R * 503×10^(-6)))
To find the resistance, we need to solve this equation for R. Rearranging the equation, we have:
e^(-3.21/(R * 503×10^(-6))) = 16.3 / 94.5
Taking the natural logarithm (ln) of both sides, we get:
-3.21/(R * 503×10^(-6)) = ln(16.3 / 94.5)
Now, we can solve for R by isolating it:
R = -3.21 / (ln(16.3 / 94.5) * 503×10^(-6))
Calculating the right side of the equation, we find:
R ≈ 259.4 Ω
Know more about resistance here:
https://brainly.com/question/32301085
#SPJ11
T/F. the force between the two wires 1. pulls the wires together.
False. The force between two parallel wires carrying electric current can either attract or repel the wires, depending on the direction of the currents.
The force follows Ampere's right-hand rule, which states that if the currents in the wires are in the same direction, the wires repel each other, and if the currents are in opposite directions, the wires attract each other. Therefore, the force between the two wires can pull them together or push them apart, depending on the direction of the currents.
Learn more about Ampere's right-hand rule here:
https://brainly.com/question/32250956
#SPJ11
Write a function addElements which performs an addition operation on the elements in a vector if their indices are between min_index and max_index. • Function Specifications: o The function name: addElements o The function parameters in this order: • vector vect: a vector of integers • int min_index: Minimum range of the indices of the vector int max_index: Maximum range of the indices of the vector o The function returns an integer depending on the following conditions: - It returns the sum of all elements in the vector(inclusive of min_index and max_index) It returns - 1 if min_index is greater than max_index - It returns -2 if either or both min_index and max_index exceed the bounds of the vector
The provided MATLAB code presents an implementation of the `addElements` function based on the given specifications. The function takes a vector of integers, `vect`, as well as `min_index` and `max_index` values representing the desired range of indices.
Here's a possible implementation of the `addElements` function in C++:
```cpp
#include <vector>
int addElements(std::vector<int>& vect, int min_index, int max_index) {
int sum = 0;
if (min_index > max_index) {
return -1;
}
if (min_index < 0 || max_index >= vect.size()) {
return -2;
}
for (int i = min_index; i <= max_index; i++) {
sum += vect[i];
}
return sum;
}
```
This function takes a vector of integers (`vect`) and the minimum and maximum indices (`min_index` and `max_index`). It initializes a variable `sum` to store the sum of the elements.
The function then checks if `min_index` is greater than `max_index`. If so, it returns -1 indicating an invalid range.
Next, it checks if `min_index` is less than 0 or `max_index` exceeds the bounds of the vector. If either condition is true, it returns -2 indicating an out-of-bounds index.
Finally, it loops through the elements from `min_index` to `max_index` (inclusive) and adds them to the `sum` variable. After the loop, it returns the calculated sum.
Please note that this is just one possible implementation of the function and there can be variations based on specific requirements or programming style preferences.
Learn more about MATLAB code here:-
https://brainly.com/question/12950689
#SPJ11
If myMovies collection is currently empty, how many documents would be inserted by the following call to insertMany().
db.myMovies.insertMany(
[{"_id" : "tt0084726",
"title" : "Star Trek II: The Wrath of Khan",
"year" : 1982,
"type" : "movie"},
{"_id" : "tt0796366",
"title" : "Star Trek",
"year" : 2009,
"type" : "movie"},
{"_id" : "tt0084726",
"title" : "Star Trek II: The Wrath of Khan",
"year" : 1982,
"type" : "movie"},
{"_id" : "tt1408101",
"title" : "Star Trek Into Darkness",
"year" : 2013,
"type" : "movie"},
{"_id" : "tt0117731",
"title" : "Star Trek: First Contact",
"year" : 1996,
"type" : "movie"}],
{ordered: false})
a)4
b)2
c)5
d)0
The call to insertMany() will insert 5 documents if the myMovies collection is currently empty.What is MongoDB?MongoDB is a document-oriented NoSQL database program that utilizes JSON-like documents with optional schemas.
MongoDB is a distributed database at its heart, which means that it is optimized for horizontal scaling by spreading data across many commodity servers. MongoDB has characteristics that make it well-suited to modern application development, particularly cloud-based applications, as it supports a high degree of scalability, reliability, and performance.How many documents would be inserted by the following call to insertMany() if the myMovies collection is currently empty?db.myMovies.insertMany([{"_id" : "tt0084726","title" : "Star Trek II: The Wrath of Khan","year" : 1982,"type" : "movie"},{"_id" : "tt0796366","title" : "Star Trek","year" : 2009,"type" : "movie"},{"_id" : "tt0084726","title" : "Star Trek II: The Wrath of Khan","year" : 1982,"type" : "movie"},{"_id" : "tt1408101","title" : "Star Trek Into Darkness","year" : 2013,"type" : "movie"},{"_id" : "tt0117731","title" : "Star Trek: First Contact","year" : 1996,"type" : "movie"}],{ordered: false})The answer is (c) 5.The first part of the insertMany() method's call includes an array of documents to insert into the collection. In this instance, the array contains five JSON objects. Since the collection is empty, all of the records in the array will be inserted. As a result, the answer is (c) 5.
To know more about MongoDB visit :
https://brainly.com/question/30636384
#SPJ11
1)Saturated steam at 1.20bar (absolute)is condensed on the outside ofahorizontal steel pipe with an inside and outside diameter of 0.620 inches and 0.750 inches, respectively. Cooling water enters the tubes at 60.0°F and leaves at 75.0°F at a velocity of 6.00ft/s. (HINT: You may assume laminar condensate flow.You many also assume that the mean bulk temperature of the cooling water is equal to the wall temperature on the outside of the pipe, T".You may also neglect the viscosity correction in your calculations.)a)What are the inside
Answer:
hi = 7026.8 W/m^2.k
Explanation:
Given data :
pressure of saturated steam = 1.2 bar
Horizontal steel pipe : inside diameter = 0.620 , outside diameter = 0.750 inches
temperature of water at entry = 60°F
temperature of water at exit = 75°F
velocity of water = 6 ft/s
Calculate the Inside convective heat transfer coefficient ( hi )
mean temperature ( Tm ) = 60 + 75 / 2 = 67.5°F ≈ 292.877 K ≈ 19.727°C
next : find the properties of water at this temperature ( 19.727°C )
thermal conductivity = 0.598 w/m.k
density = 1000 kg/m^3
specific heat ( Cp ) = 4.18 KJ/kg.k
viscosity = 0.001 pa.s
velocity of water = 6 ft/s ≈ 1.8288 m/s
∴ Re ( Reynolds number ) = 28712.16
and Prandtl number ( Pr ) = (4180 * 0.001) / 0.598 = 6.989
finally to determine the inside convective heat transfer coefficient we will apply the Dittos - Bolter equation
hi = 7026.8 w/m^2.k
attached below is the remaining solution
A 2-inch square aluminum strut is maintained in the position shown by a pin support at A and by sets of rollers at B and C that prevent rotation of the strut in the plane of the figure. Determine the allowable load P using a factor of safety of 3.0. Consider only buckling in the plane of the figure and use E = 10,000 ksi.
Thus, the allowable load on the strut is 9.84 lbf.
Given Data:Length of the strut = L = 60 in = 5 ftBreadth of the strut = b = 2 inThickness of the strut = t = 0.125 inElastic Modulus of Aluminum = E = 10000 ksiLoad on the strut = PRequired:Allowable load on the strut = P (with Factor of Safety of 3.0)We know that the area of cross-section of the strut = A = b × t = 2 × 0.125 = 0.25 sq.in.And, Moment of Inertia of cross-sectional area of the strut, I = (1/12) × b × t³ = (1/12) × 2 × 0.125³ = 0.00052 in⁴Also, the slenderness ratio, L/r = L/√(I/A) = L/(I/A)^(1/2)As the strut is fixed at A and only supported by rollers at B and C, it can buckle in the plane of the figure and hence Euler's Buckling Load formula for this case is:PE = π² × E × I / L²For the given strut,PE = π² × 10000 × 0.00052 / (60×12)²= 29.52 lbfNow, the allowable load, P = PE / FoS= 29.52 / 3= 9.84 lbfThus, the allowable load on the strut is 9.84 lbf.
To know more about allowable load,
https://brainly.com/question/30464657
#SPJ11
The most important reason to use 2 compressors in a cascade system is to :
a. Accomplish lower temperature
b. Permit the use of inexpensive lubrication oil
c. Avoid the need for very high compression ratios
d. Divide the cooling load between 2 compressors
The most important reason to use 2 compressors in a cascade system is to: Divide the cooling load between 2 compressors. (Option D)
How is this so?In a cascade system, two compressors are used to distribute and share the cooling load.
By dividing the workload between the compressors, each compressor operates at a more manageable capacity, enhancing overall system efficiency and performance.
This approach allows for better control, reliability, and optimized cooling capacity distribution in the cascade refrigeration system.
Learn more about compressors at:
https://brainly.com/question/30404542
#SPJ1
in describing the breedloves' funishings and the layout of the house, whta does morrison achieve?
In describing the Breedloves' furnishings and the layout of the house, Morrison achieves several objectives. Firstly, she conveys the socioeconomic status and living conditions of the Breedlove family.
The modest and worn-out furnishings, along with the cramped and deteriorating house, serve as symbols of their poverty and lack of resources.
Furthermore, Morrison uses these descriptions to highlight the stark contrast between the Breedloves and other characters in the novel who enjoy more affluent lifestyles. By juxtaposing the Breedloves' meager living conditions with the lavishness of others, Morrison emphasizes the deeply ingrained societal inequalities and the impact of race and class on individuals' lives.
Know more about Breedloves' furnishings here:
https://brainly.com/question/28734443
#SPJ11
Assume that the flowrate. Q, of a gas from a smokestack is a function of the density of the ambient air,rhoarho a , the density of the gas,rhogrho g , within the stack, the acceleration of gravity, g, and the height and diameter of the stack, h and d, respectively. Use rhocrho c , d, and g as repeating variables to develop a set of pi terms that could be used to describe this problem.
Answer:
hello your question poorly written attached below is the well written question
answer : ∅[tex]( \frac{Pg}{Pa} , \frac{h}{d})[/tex][tex]( \frac{p_{g} }{p_{a} } , \frac{h}{d} )[/tex]
Explanation:
Develop a set of pi terms that could be used to describe the problem
attached below is the required solution