For the following equilibrium, indicate which of the following actions would NOT disturb the equilibrium:
HNO2 (aq)+H2O(l)<= H3O^ + (aq)+NO2^- (aq)
a) Add HNO2
b) Increase the concentration of H30
c) Add NaNO2
d) Decrease the concentration of NO2^- e) Add NaNO3(s)

Answer:

E

Step-by-step explanation

[tex]\sqrt{3-2x}[/tex] = [tex]\sqrt{2x}[/tex] + 1

square both sides to clear the radicals

([tex]\sqrt{3-2x}[/tex] )² = ([tex]\sqrt{2x}[/tex] + 1)²← expand using FOIL

3 - 2x = 2x + 2[tex]\sqrt{2x}[/tex] + 1 ( subtract 2x + 1 from both sides )

- 4x + 2 = 2[tex]\sqrt{2x}[/tex] ( divide through by 2 )

- 2x + 1 = [tex]\sqrt{2x}[/tex] ( square both sides )

(- 2x + 1)² = 2x ← expand left side using FOIL

4x² - 4x + 1 = 2x ( add 4x to both sides )

4x² + 1 = 6x ( subtract 1 from both sides )

4x² = 6x - 1

Therefore, approximately 246.23 grams of potassium are produced in the given electrolysis process.

To calculate the grams of potassium produced, we need to use Faraday's law of electrolysis, which states that the amount of substance produced at an electrode is directly proportional to the quantity of electricity passed through the cell. The formula is:

Mass (g) = (Current (A) * Time (s) * Molar Mass (g/mol)) / (Faraday's Constant (C/mol))

Given:

Current = 7.53 × 10⁴ A

Time = 18.8 days = 18.8 * 24 * 60 * 60 seconds

Molar Mass of Potassium (K) = 39.10 g/mol

Faraday's Constant = 96,485 C/mol

Now we can plug in these values to calculate the mass of potassium produced:

Mass = (7.53 × 10⁴ A * 18.8 * 24 * 60 * 60 s * 39.10 g/mol) / (96,485 C/mol)

Mass ≈ 246.23 g

To know more about electrolysis process,

https://brainly.com/question/14967237

#SPJ11

The solution to the equation is x = (4w + 3k) / 3.

To solve the equation 3(x - k) / w = 4 for x in terms of w and k, we can follow these algebraic manipulations:

Multiply both sides of the equation by w to eliminate the fraction:

3(x - k) = 4w

Expand the left side by distributing 3:

3x - 3k = 4w

Add 3k to both sides of the equation to isolate the term with x:

3x = 4w + 3k

Divide both sides by 3 to solve for x:

x = (4w + 3k) / 3

Therefore, the solution to the equation is x = (4w + 3k) / 3.

for such more question on equation

https://brainly.com/question/17482667

#SPJ8

(a) An example of a ketone is acetone. (b) An example of an organolithium reagent is methyllithium. (c) An example of an acetal is 1,1-diethoxyethane. (d) An example of a carboxylic acid is acetic acid. (e) An example of an ester is ethyl acetate. (f) An example of an amide is acetamide. (g) An example of a nitrile is acetonitrile. (h) An example of a primary amine is methylamine. (j) An example of a tertiary alcohol is tert-butyl alcohol

a) A ketone: One example of a ketone is acetone, which has the chemical formula (CH3)2CO. Acetone is a colorless liquid that is commonly used as a solvent.

b) An organolithium reagent: One example of an organolithium reagent is methyllithium (CH3Li). It is a strong base and nucleophile that is used in organic synthesis.

c) An acetal: An example of an acetal is 1,1-diethoxyethane, which has the chemical formula CH3CH(OC2H5)2. It is formed by the reaction of an aldehyde or ketone with two equivalents of an alcohol in the presence of an acid catalyst.

d) A carboxylic acid: One example of a carboxylic acid is acetic acid, which has the chemical formula CH3COOH. Acetic acid is a weak acid that is found in vinegar and is commonly used in the production of plastics, textiles, and pharmaceuticals.

e) An ester: One example of an ester is ethyl acetate, which has the chemical formula CH3COOCH2CH3. It is a colorless liquid with a fruity odor and is commonly used as a solvent in paint, glue, and nail polish remover.

f) An amide: An example of an amide is acetamide, which has the chemical formula CH3CONH2. It is a white crystalline solid that is used as a precursor in the production of pharmaceuticals and pesticides.

g) A nitrile: One example of a nitrile is acetonitrile, which has the chemical formula CH3CN. It is a colorless liquid that is commonly used as a solvent in organic synthesis and as a starting material for the production of pharmaceuticals.

h) A primary amine: An example of a primary amine is methylamine, which has the chemical formula CH3NH2. It is a colorless gas that is used in the production of pharmaceuticals, dyes, and pesticides.

j) A tertiary alcohol: One example of a tertiary alcohol is tert-butyl alcohol, which has the chemical formula (CH3)3COH. It is a colorless liquid that is used as a solvent and as a reagent in organic synthesis.

Let us know more about nitrile :

https://brainly.com/question/31656776.

#SPJ11

Equilibrium vapour pressure is the pressure of vapours of a substance that is in equilibrium with its liquid form at a specific temperature. The pressure exerted by the vapours over the liquid is constant as long as the temperature of the liquid is constant.

The molecular basis of this physical quantity is due to the fact that every liquid has its own unique equilibrium vapour pressure at a given temperature. The molecules of a liquid are in constant motion. When a liquid is placed in a closed container, the molecules of the liquid evaporate and form vapour.

When a certain number of vapour molecules collide with the surface of the liquid, they lose their kinetic energy and return to the liquid state. This process is called condensation. At equilibrium, the rate of evaporation is equal to the rate of condensation. The molecules in the vapour phase exert pressure on the walls of the container which is called the equilibrium vapour pressure.

The effect of temperature on equilibrium vapour pressure is that the equilibrium vapour pressure increases with an increase in temperature. When temperature increases, the average kinetic energy of the molecules increases. This causes more molecules to escape from the surface of the liquid and become vapour. Therefore, the number of molecules in the vapour phase increases which leads to an increase in the equilibrium vapour pressure.

The effect of surface area on equilibrium vapour pressure is that an increase in surface area leads to an increase in equilibrium vapour pressure. When surface area is increased, the number of molecules on the surface of the liquid also increases. This leads to more molecules escaping from the surface and becoming vapour.

Therefore, the number of molecules in the vapour phase increases which leads to an increase in the equilibrium vapour pressure.

Equilibrium vapour pressure is a physical quantity that is dependent on the temperature and surface area of the liquid. As the temperature of the liquid increases, the equilibrium vapour pressure also increases. When the surface area of the liquid is increased, the equilibrium vapour pressure also increases.

To know more about condensation visit :

brainly.com/question/1447093

#SPJ11

When gas flows through the nozzle, the gas temperature will DECREASE. In a steam turbine, the specific volume of gas along the flow direction will INCREASE.

When an ideal gas flows through a throttling device, the temperature along the flow direction will DECREASE.The nozzle is a device that is widely used in the field of fluid mechanics and thermodynamics. It is a device that is used to convert the pressure energy of a fluid into kinetic energy. This results in the fluid's flow velocity increasing as the pressure drops.

                           Steam turbines are machines that are used to generate mechanical power by using steam as the working fluid. Steam is supplied to the turbine where it flows over the turbine's blades, thereby producing mechanical energy. The specific volume of gas along the flow direction will increase as it flows through the steam turbine.In a throttling device, the flow of an ideal gas is reduced. It is a device that is designed to reduce the pressure and temperature of a gas. When an ideal gas flows through a throttling device, the temperature along the flow direction will decrease.

Learn more about thermodynamics

brainly.com/question/33422249

#SPJ11

A local university has been gifted $150,000 to establish an endowment fund for a student scholarship. The endowment fund earns interest at a rate of 3.00% compounded semi-annually. The university will award the scholarship at the end of every quarter, with the first scholarship being awarded four years from now. the scholarship that the university can award is $3,345.06.

The formula for compound interest is given by:

[tex]A=P(1+r/n)^nt,[/tex]

where P is the principal amount, r is the interest rate, n is the number of times interest is compounded per year, t is the time in years, and A is the amount of money accumulated after t years.

Given, Principal amount = P = $150,000, Interest rate = r = 3% compounded semi-annually, Time = t = 4 years, and Scholarship is awarded at the end of every quarter, which implies n = 4 x 2 = 8 times compounded per year.

The formula for the future value of an annuity is given by:

[tex]FV = (PMT [(1+r/n)^(n*t) - 1]/r) × (r/n),[/tex]

where PMT is the payment, r is the interest rate, n is the number of times interest is compounded per year, t is the time in years, and FV is the future value of the annuity.

We need to find the payment that can be made from the endowment fund every quarter that grows to $150,000 in four years.

Therefore, FV = $150,000, PMT = Scholarship payment, r = 3% compounded semi-annually, n = 4 x 2 = 8 times compounded per year, and t = 4 years. Substituting the values, we get:

[tex]$150,000 = (PMT [(1+0.03/8)^(8*4) - 1]/0.03) × (0.03/8).[/tex]

Solving for PMT, we get PMT = $3,345.06.

Hence, the scholarship that the university can award is $3,345.06.

To know more about compound interest visit:

https://brainly.com/question/14295570

#SPJ11

The length of AC is approximately 10.85 cm.

To find the length of AC, we can use the Pythagorean theorem.

According to the Pythagorean theorem, in a right triangle where c is the hypotenuse (the side opposite the right angle) and a and b are the other two sides, the relationship between the lengths of the sides is:

c^2 = a^2 + b^2

In this case, we can use AB as one of the legs of the right triangle and BC as the other leg, with AC being the hypotenuse. So we have:

AC^2 = AB^2 + BC^2

AC^2 = (10.2 cm)^2 + (3.7 cm)^2

AC^2 = 104.04 cm^2 + 13.69 cm^2

AC^2 = 117.73 cm^2

To find the length of AC, we take the square root of both sides:

AC = sqrt(117.73 cm^2)

AC ≈ 10.85 cm

Therefore, the length of AC is approximately 10.85 cm.

Learn more about   length from

https://brainly.com/question/2217700

#SPJ11

Hence, the strain in the lead and steel wires are 0.0025.Change in length / Original length Strain of lead wire can be calculated as follows:

Length of lead wire,

L = 2 m

Length of steel wire, L = 2 m

Diameter of lead wire, d = 2 mm

Radius of lead wire, r = d/2 = 1 mm

Diameter of steel wire, D = 2 mm Radius of steel wire,

R = D/2 = 1 mm Length of composite wire = L1 + L2 = 4 mChange in length,

ΔL = 4,005 - 4 = 0.005 m

We know that Strain = Original length, L = 2 m Change in length, ΔL = 0.005 m

Therefore,

strain = ΔL/L = 0.005/2

= 0.0025

Strain of steel wire can be calculated as follows: Original length,

L = 2 mChange in length,

ΔL = 0.005 m Therefore,

strain = ΔL/L = 0.005/2

= 0.0025

To know more about Length visit:

https://brainly.com/question/32844558

#SPJ11

Mean: 6.7 hours

Standard deviation: 0.35 hours

The mean sleep time for the population is 6.7 hours, and the standard deviation is 0.35 hours. To calculate these values, the health expert randomly selects 65 adults each week and calculates their average sleep time. Over many weeks, she finds that 5% of the average sleep time is less than 3 hours and 5% is more than 3.4 hours.

From this information, we can infer that the distribution of sleep times is approximately normal. Since the mean sleep time is 6.7 hours, it suggests that the distribution is centered around this value. The standard deviation of 0.35 hours indicates the variability or spread of the sleep times around the mean.

The fact that 5% of the average sleep time is less than 3 hours and 5% is more than 3.4 hours allows us to estimate the standard deviation. In a normal distribution, approximately 2.5% of the data falls below 1.96 standard deviations below the mean, and 2.5% falls above 1.96 standard deviations above the mean. Therefore, we can calculate the standard deviation as (3.4 - 6.7) / 1.96 ≈ 0.35.

In conclusion, the mean sleep time for the population is 6.7 hours, and the standard deviation is 0.35 hours. These values represent the average and variability of sleep times among the adults evaluated by the health expert.

Learn more about: standard deviation

brainly.com/question/29115611

#SPJ11

Finally, taking the inverse cosine ([tex]cos^{-1[/tex]) of both sides, we can find the measure of angle VUW (θ):

m/VUW = [tex]cos^{-1(-0.6875)[/tex]

To find the measure of angle VUW (m/VUW), we can use the properties of a circle and the given information.

In circle U, UV is a radius of length 12 units. Since VW is also a radius of the same circle, it will have the same length of 12 units. Therefore, we have a triangle UVW with UV = VW = 12 units.

To find the measure of angle VUW, we can use the Law of Cosines. In this case, we have a triangle with sides of length 12, 12, and 87. Let's denote angle VUW as θ.

Applying the Law of Cosines, we have:

[tex]87^2 = 12^2 + 12^2[/tex] - 2 x 12 x 12 x cos(θ)

Simplifying the equation:

7569 = 144 + 144 - 288 x cos(θ)

7569 = 288 - 288 x cos(θ)

Dividing both sides by 288:

26.3125 = 1 - cos(θ)

Subtracting 1 from both sides:

-0.6875 = -cos(θ)

Finally, taking the inverse cosine ([tex]cos^{-1[/tex]) of both sides, we can find the measure of angle VUW (θ):

m/VUW = [tex]cos^{-1(-0.6875)[/tex]

The resulting value of [tex]cos^{-1(-0.6875)[/tex] will give us the measure of angle VUW in radians or degrees, depending on the unit of measurement used.

For more such answers on Radians

https://brainly.com/question/29058626

#SPJ8

The vector parametric equation for the line through the points (1,2,4) and (5,1,−1) is given by L(t) = (1, 2, 4) + t(4, -1, -5).

To find the vector parametric equation for a line, we need a point on the line and a direction vector. The given points (1,2,4) and (5,1,−1) can be used to determine the direction vector. Subtracting the coordinates of the first point from the second point, we get (5-1, 1-2, -1-4) = (4, -1, -5). This direction vector represents the change in x, y, and z coordinates as we move along the line. Now, we can write the vector parametric equation using the point (1,2,4) as the initial position and the direction vector (4, -1, -5). Adding the direction vector scaled by a parameter t to the initial point, we obtain L(t) = (1, 2, 4) + t(4, -1, -5).

This equation represents the line passing through the points (1,2,4) and (5,1,−1), where t is a parameter that allows us to obtain different points on the line by varying its value.

To learn more about vector refer:

https://brainly.com/question/15519257

#SPJ11

The calculations involve determining the mass flow rates, cooling rate, heat removal rate, compressor power input, and coefficient of performance (COP).

a) The mass flow rate through the lower cycle can be determined using the principle of conservation of mass. Since the upper cycle mass flow rate is given as 0.5 kg/s, we can assume that the mass flow rate through the lower cycle is also 0.5 kg/s.

b) The rate of cooling in tons can be calculated by dividing the heat removed from the cycle by the refrigeration effect. Since the refrigeration effect is given by the mass flow rate through the upper cycle multiplied by the enthalpy change between the evaporator and the condenser, we need additional information to calculate the rate of cooling in tons.

c) The rate of heat removed from the cycle can be calculated by multiplying the mass flow rate through the upper cycle by the specific heat capacity of the working fluid and the temperature difference between the evaporator and the condenser.

d) The compressor's power input in kW can be determined using the equation: power = mass flow rate through the upper cycle multiplied by the specific enthalpy increase across the compressor.

e) The coefficient of performance (COP) is the ratio of the rate of cooling to the compressor's power input. It can be calculated by dividing the rate of cooling in tons by the power input in kW.

For a more accurate calculation, specific values for enthalpies, specific heat capacities, and refrigeration effect are required.

Learn more about mass flow rates

brainly.com/question/30763861

#SPJ11

Answer:

c

Step-by-step explanation:

Using Euler's Method with a step size of h = 0.1, the approximate values of the solution at t = 0.1, 0.2, 0.3, 0.4, and 0.5 are as follows:

t = 0.1: y ≈ 0.805

t = 0.2: y ≈ 0.753

t = 0.3: y ≈ 0.715

t = 0.4: y ≈ 0.687

t = 0.5: y ≈ 0.667

To apply Euler's Method, we need to use the given formula:

Yn = Yn-1 + hF(n-1, Yn-1)

In this case, the given differential equation is 2y = 2 - e^(-y) and the initial condition is y(0) = 1.

We can rewrite the differential equation as:

2y = 2 - e^(-y)

2y + e^(-y) = 2

Now, let's apply Euler's Method using a step size of h = 0.1.

For t = 0.1:

Y1 = Y0 + hF(0, Y0)

= 1 + 0.1(2 - e^(-1))

≈ 0.805

For t = 0.2:

Y2 = Y1 + hF(0.1, Y1)

≈ 0.753

For t = 0.3:

Y3 = Y2 + hF(0.2, Y2)

≈ 0.715

For t = 0.4:

Y4 = Y3 + hF(0.3, Y3)

≈ 0.687

For t = 0.5:

Y5 = Y4 + hF(0.4, Y4)

≈ 0.667

Using Euler's Method with a step size of h = 0.1, we have approximated the values of the solution at t = 0.1, 0.2, 0.3, 0.4, and 0.5 to be approximately 0.805, 0.753, 0.715, 0.687, and 0.667, respectively.

To know more about Euler's method visit:

https://brainly.com/question/32691755

#SPJ11

1. Flux losses in pipe attachments depend on factors such as the geometry of the attachments, the flow velocity, and the nature of the fluid being transported.

1. Flux losses in pipe attachments, such as bends, elbows, and fittings, depend on several factors. The geometry of the attachments plays a crucial role, as sharp turns or sudden changes in pipe direction can cause increased turbulence and energy losses.

Additionally, the flow velocity has an impact, as higher velocities can result in greater frictional losses. The nature of the fluid being transported also plays a role, with properties such as viscosity affecting the flow resistance.

2. The Reynolds value is a dimensionless parameter used to determine the flow regime. It is calculated by dividing the product of flow velocity, pipe diameter, and fluid density by the fluid viscosity. If the Reynolds value is below a certain threshold, the flow is considered laminar, characterized by smooth and orderly streamlines.

If the Reynolds value exceeds the threshold, the flow is turbulent, marked by irregular and chaotic motion. The transition from laminar to turbulent flow depends on various factors, including pipe roughness and flow velocity.

3. The loss coefficient of a valve quantifies the pressure drop across the valve. It is a dimensionless parameter that depends on the valve design, including factors such as the shape, size, and internal geometry.

However, the loss coefficient may not remain constant for different flow conditions. It can vary with changes in the valve's position, the flow rate, and the properties of the fluid. For example, partially closing a valve can increase the obstruction to the flow, resulting in a higher loss coefficient.

4. The loss coefficient of a gate valve can change based on the valve's position. Gate valves have a movable gate that controls the flow by either fully opening or closing the passage. When the gate is fully open, the flow obstruction is minimal, resulting in a lower loss coefficient. However, as the valve is partially closed, the obstruction to the flow increases, leading to a higher loss coefficient. The change in the loss coefficient with the position of the gate valve can be determined through experimental measurements.

In conclusion, the flux losses in pipe attachments depend on various factors such as geometry and flow velocity, the flow can be classified as laminar or turbulent based on the Reynolds value, the valve's loss coefficient can vary with different flow conditions, and the loss coefficient of a gate valve can change with the position of the valve.

Learn more about Geometry

brainly.com/question/33651265

#SPJ11

The temperature at which the given reaction will proceed 4.50 times faster than it did at 357 K is 451.23 K.

We have to determine the temperature (in Kelvin) at which the given reaction will proceed 4.50 times faster than it did at 357 K given that the reaction has an activation energy of 26.09 kJ/mol.The rate constant, k is given by the Arrhenius equation as:k = Ae^(-Ea/RT)where:

k = rate constant

A = pre-exponential factor or frequency factor

e = base of natural logarithm

Ea = activation energy

R = gas constant

T = temperature in Kelvin Rearrange the equation to get the ratio of rate constants:

k1/k2 = (Ae^(-Ea/RT1)) / (Ae^(-Ea/RT2))Cancel out the pre-exponential factor,

A:k1/k2 = e^(-Ea/R) x (1/T1 - 1/T2)

Let k1 and k2 be the rate constants at temperatures T1 and T2 respectively. We have to solve for T2 given that k2 = 4.50k1 and T1 = 357 Substituting the values:

k1/(4.50k1) = e^(-26.09/(8.314 x 357) x (1/357 - 1/T2))1/4.50

= e^(-7.02 x 10^-4 x (1/357 - 1/T2))

Taking the natural logarithm of both sides, we get:

-ln(4.50) = -7.02 x 10^-4 x (1/357 - 1/T2)T2

= 357 / (1 + (4.50 x e^(-ln(4.50)/7.02 x 10^-4)))

= 451.23 K

To know more about reaction visit:-

https://brainly.com/question/30464598

#SPJ11

A. The marginal utility of consumption (MUc) of increasing consumption from c=4 to c=5 is 10.

B. The marginal utility of consumption (MUc) of increasing consumption from c=5 to c=6 is 12.

The utility function given is u(c,l) = c² + l², where c represents consumption and l represents leisure. To find the marginal utility of consumption (MUc), we need to take the derivative of the utility function with respect to c.

Taking the derivative of u(c,l) with respect to c, we get:

∂u/∂c = 2c

A. To find the MUc of increasing consumption from c=4 to c=5, we substitute c=4 into the derivative:

MUc = 2(4) = 8

B. To find the MUc of increasing consumption from c=5 to c=6, we substitute c=5 into the derivative:

MUc = 2(5) = 10

Therefore, the MUc of increasing consumption from c=4 to c=5 is 8, and the MUc of increasing consumption from c=5 to c=6 is 10.

The concept of utility function is fundamental in economics and represents an individual's preferences over different combinations of goods and services. Marginal utility measures the change in satisfaction or utility resulting from a one-unit increase in the consumption of a particular good or service, holding other factors constant. It helps in understanding how consumers make choices based on their preferences and the additional satisfaction they derive from consuming more of a particular good or service.

Learn more about marginal utility

brainly.com/question/31995733

#SPJ11

(a) The total cost of producing 200 units is approximately $6103.53.

(b) Producing approximately 2641 units will result in total costs of $8500.

(a) To find the total cost of producing 200 units, we can substitute x = 200 into the cost function C(x) = 875 ln(x + 10) + 1600 and evaluate it.

C(200) = 875 ln(200 + 10) + 1600

C(200) ≈ 875 ln(210) + 1600

C(200) ≈ 875 × 5.347 + 1600

C(200) ≈ 4503.525 + 1600

C(200) ≈ 6103.525

Therefore, the total cost of producing 200 units is approximately $6103.53.

(b) To find the number of units that will result in total costs of $8500, we can set the cost function equal to $8500 and solve for x.

875 ln(x + 10) + 1600 = 8500

875 ln(x + 10) = 8500 - 1600

875 ln(x + 10) = 6900

Next, we can divide both sides of the equation by 875 and take the exponential of both sides to eliminate the natural logarithm:

ln(x + 10) = 6900 / 875

ln(x + 10) ≈ 7.8857

Taking the exponential:

e^(ln(x + 10)) ≈ e^7.8857

x + 10 ≈ 2650.579

x ≈ 2640.579

Rounding to the nearest whole number, producing approximately 2641 units will result in total costs of $8500.

Therefore, producing approximately 2641 units will give total costs of $8500.

Learn more about total cost

brainly.com/question/31443323

#SPJ11

The definitions of polygonation, triangulation, and trilateration need to be matched with the available terms: a. polygonation, b. triangulation, c. trilateration.

1. Polygonation: Polygonation is a surveying method where a closed polygon is formed by measuring and connecting a series of consecutive points on the ground. This technique is used to establish control points and determine the boundaries of an area.

2. Triangulation: Triangulation is a surveying method that uses the principles of trigonometry to measure distances and angles between a network of points. By creating triangles with known sides and angles, the position of points can be determined accurately. Triangulation is commonly used for large-scale mapping and establishing control networks.

3. Trilateration: Trilateration is a surveying method that involves measuring distances from three or more known points to an unknown point. By intersecting the circles or spheres centered at the known points, the position of the unknown point can be determined. Trilateration is often used for GPS positioning and precise distance measurements.

Matching the definitions with the available terms:

Learn more about  polygonation

brainly.com/question/17756657

#SPJ11

The design compressive strength for the HSS 406.4 × 6.4 section of steel with Fy = 345 MPa is 94.7 kN.

The effective length factor K for a sway frame with sway restrained at the top of the column, according to AISC Specification Section C₃.₂, is given by the following equation:

K = [1 + (Cr / Cv) × (Lb / ry) × √(Fy / E))]²

where Lb is the unbraced length of the member in the plane under consideration

Cr is the critical load factor

Cv is the coefficient of variation for the axial load capacity of the column

ry is the radius of gyration in the plane of buckling of the member

Fy is the yield strength of the member in tension

E is the modulus of elasticity of steel

The critical load factor, according to AISC Specification Section E7, is as follows:

[tex]Cr=\pi^2*E/ (Kl/r)^2[/tex]

where Kl/r is the effective length factor,

which is calculated as follows: Kl/r = K × Lb / ry

For a hollow structural section (HSS), the radius of gyration can be calculated as follows:

ry = √[(Iy + Iz) / (A/4)]

where Iy and Iz are the second moments of area about the major and minor axes, respectively, and A is the cross-sectional area.

The design compressive strength for an HSS section is calculated as follows:

[tex]P_n=\phi\times P_{nominator}[/tex]

[tex]\phi[/tex] = 0.90 for axial compression

[tex]P_{nominator}[/tex] = Ag × Fy × Kd

where Ag is the gross cross-sectional area of the member

Fy is the specified minimum yield strength of the member

Kd is the effective length factor for the member in compression

The effective length factor K for the HSS section can be determined using the above equation:

K = [1 + (Cr / Cv) × (Lb / ry) × √(Fy / E))]²

where

Lb = Le

= 8 mCr

= pi² × E / (Kl/r)²Kl/r

= K × Lb / ryry = √[(Iy + Iz) / (A/4)]

[tex]P_{nominator}[/tex]  = Ag × Fy × KdKd can be found in AISC Specification Table B₄.₁ for various HSS shapes and bracing conditions.

For the HSS 406.4 × 6.4 section, the appropriate value of Kd is 0.85. The cross-sectional area of the HSS 406.4 × 6.4 section can be calculated using the outside diameter (OD) and wall thickness (t) as follows:

A = (OD - 2 × t)² / 4 - (OD - 2 × t - 2 × t)² / 4Ag

= A - 2 × (OD - 2 × t - 2 × t) × t

Substituting the values of the various parameters and simplifying:

[tex]P_{nominator}[/tex]  = Ag * Fy * Kd

= [360.8 mm² × 345 MPa × 0.85] / 1000

= 105.2 kN

The design compressive strength of the HSS 406.4 × 6.4 section is given by:

[tex]P_n=\phi\times P_{nominator}[/tex]

= 0.90 * 105.2 kN

= 94.7 kN

Therefore, the design compressive strength for the HSS 406.4 × 6.4 section of steel with Fy = 345 MPa is 94.7 kN.

To know more about cross-sectional area, visit:

https://brainly.com/question/13029309

#SPJ11

The balanced chemical reaction between magnesium chloride (MgCl₂) and steam (H₂O) is MgCl₂ + 2H₂O → Mg(OH)₂ + 2HCl If 1 ton of magnesium chloride reacts with steam, approximately 469,582.94 liters of hydrochloric acid are produced.

The balanced chemical reaction between magnesium chloride (MgCl₂) and steam (H₂O) can be represented as follows:

MgCl₂ + 2H₂O → Mg(OH)₂ + 2HCl

In this reaction, magnesium chloride reacts with steam to form magnesium hydroxide and hydrochloric acid.

To calculate the number of liters of hydrochloric acid produced when 1 ton (1000 kg) of magnesium chloride reacts, we need to determine the stoichiometry of the reaction.

From the balanced equation, we can see that 1 mole of magnesium chloride reacts to produce 2 moles of hydrochloric acid. The molar mass of magnesium chloride (MgCl₂) is 95.211 g/mol.

First, calculate the number of moles of magnesium chloride in 1 ton:

Number of moles of MgCl₂ = (1000 kg) / (95.211 g/mol)

Next, use the stoichiometric ratio to calculate the number of moles of hydrochloric acid produced:

Number of moles of HCl = 2 × Number of moles of MgCl₂

Finally, convert the number of moles of hydrochloric acid to liters:

Volume of HCl = (Number of moles of HCl) × (22.4 L/mol)

Performing the calculations, we have:

Number of moles of MgCl₂ = (1000 kg) / (95.211 g/mol) ≈ 10492.14 mol

Number of moles of HCl = 2 × 10492.14 mol ≈ 20984.29 mol

Volume of HCl = 20984.29 mol × 22.4 L/mol ≈ 469582.94 L

Therefore, when 1 ton of magnesium chloride reacts with steam, approximately 469,582.94 liters of hydrochloric acid are produced.

Learn more about chemical reaction at https://brainly.com/question/23728581

#SPJ11

The enthalpy change for the combustion of gaseous butane can be represented using methods such as standard enthalpy change, enthalpy change per mole of reaction, enthalpy change per mole of substance, and bond enthalpy.

The combustion reaction of gaseous butane (C₄H₁₀) can be represented in different ways to show the enthalpy change. Here are the four methods of representing the equation and the corresponding enthalpy change:

Standard Enthalpy Change (ΔH°):

C₄H₁₀(g) + 13/2 O₂(g) → 4CO₂(g) + 5H₂O(g)

ΔH° = -2877 kJ/mol (Negative sign indicates exothermic reaction)

Enthalpy Change per Mole of Reaction (ΔH):

C₄H₁₀(g) + 13/2 O₂(g) → 4CO₂(g) + 5H₂O(g)

ΔH = -2877 kJ (For the given stoichiometry of the reaction)

Enthalpy Change per Mole of Substance (ΔHf):

ΔHf[C₄H₁₀(g)] = -125.5 kJ/mol (Enthalpy change for 1 mole of gaseous butane)

Bond Enthalpy (ΔHb):

ΔHb = Σ(ΔHb[reactants]) - Σ(ΔHb[products])

ΔHb = [4ΔHb(C=O) + 5ΔHb(O-H)] - [10ΔHb(C-H)]

Note: ΔHb represents the bond enthalpy change for the given reaction.

To know more about enthalpy change,

https://brainly.com/question/30014232

#SPJ11

The second ionization energy of a helium atom is [tex]8.716 * 10^-18 J[/tex] and the wavelength of the photon emitted is [tex]7.239 * 10^-8 m.[/tex]

The Rydberg equation is suitable for hydrogen-like atoms with a proton nuclear charge and a single electron. It is given as follows:

[tex]\(\frac{1}{\lambda} = RZ^2 \left(\frac{1}{n_1^2} - \frac{1}{n_2^2}\right)\)[/tex]

where:

[tex]\(\lambda\)[/tex]is the wavelength of the photon

R is the Rydberg constant

Z is the atomic number of the element

[tex]\(n_1\)[/tex]is the initial energy level

[tex]\(n_2\)[/tex] is the final energy level

Using this equation and the given first ionization energy of a hydrogen atom, we can calculate the Rydberg constant (R). The first ionization energy of hydrogen (H) is 13.527 eV. We can convert this to joules (J) using the conversion factor 1 eV = [tex]1.602 x 10^-19 J.[/tex] So:

[tex]\(E = 13.527 \text{ eV} \times \frac{1.602 \times 10^{-19} \text{ J}}{1 \text{ eV}} = 2.179 \times 10^{-18} \text{ J}\)[/tex]

We can use this energy to calculate R:

[tex]\(\frac{1}{\lambda} = RZ^2 \left(\frac{1}{n_1^2} - \frac{1}{n_2^2}\right)\)\(R =\\ \frac{E}{Z^2 \left(\frac{1}{n_1^2} - \frac{1}{n_2^2}\right)} = \\\frac{2.179 \times 10^{-18} \text{ J}}{1^2 \left(\frac{1}{1^2} - \frac{1}{\infty^2}\right)} = 2.179 \times 10^{-18} \text{ J}\)[/tex]

Now we can use this value of R to calculate the second ionization energy of a helium (He) atom. Helium has an atomic number of 2, so Z = 2. We need to calculate the energy required to remove the second electron from a helium atom, so[tex]\(n_1 = 1\)[/tex](since the first electron has already been removed) and [tex]\(n_2 = \infty\)[/tex](since the electron is being removed from the atom completely). Plugging these values into the equation gives:

[tex]\(\frac{1}{\lambda} = RZ^2 \left(\frac{1}{n_1^2} - \frac{1}{n_2^2}\right)\)\(\frac{1}{\lambda} =\\ (2.179 \times 10^{-18} \text{ J}) \times (2^2) \left(\frac{1}{1^2} - \frac{1}{\infty^2}\right)\)\(\frac{1}{\lambda} =\\ (2.179 \times 10^{-18} \text{ J}) \times 4 \left(1 - 0\right)\)\(\frac{1}{\lambda} = \\8.716 \times 10^{-18} \text{ J}\)[/tex]

[tex]\(\lambda = \frac{hc}{E} = \frac{(6.626 \times 10^{-34} \text{ J s}) \times (3 \times 10^8 \text{ m/s})}{8.716 \times 10^{-18} \text{ J}} = 7.239 \times 10^{-8} \text{ m}\)[/tex]

Therefore, the second ionization energy of a helium atom is [tex]8.716 * 10^-18 J[/tex] and the wavelength of the photon emitted is[tex]7.239 * 10^-8 m.[/tex]

Know more about Rydberg equation

https://brainly.com/question/32679031

#SPJ11

The second ionization energy of a helium atom is 0 eV, meaning that it does not require any additional energy to remove the second electron since the atom is already fully ionized.

The Rydberg equation can be used to calculate the ionization energy of hydrogen-like atoms. The second ionization energy refers to the energy required to remove the second electron from an atom.

To calculate the second ionization energy of a helium atom, we can start by considering the electron configuration of helium. Helium has two electrons in total, so the first ionization energy refers to the energy required to remove one of these electrons.

Given that the first ionization energy of a hydrogen atom is 13.527 eV, we can use this information to calculate the first ionization energy of helium. Since helium has two electrons, the total ionization energy required to remove both electrons is twice the ionization energy of hydrogen.

First ionization energy of helium = 2 * (first ionization energy of hydrogen)
First ionization energy of helium = 2 * 13.527 eV
First ionization energy of helium = 27.054 eV

Now, let's move on to calculating the second ionization energy of helium. Since the first electron has already been removed, the second ionization energy refers to the energy required to remove the remaining electron.

To calculate the second ionization energy of helium, we need to subtract the first ionization energy from the total energy required to remove both electrons.

Second ionization energy of helium = Total ionization energy - First ionization energy
Second ionization energy of helium = (2 * 13.527 eV) - 27.054 eV
Second ionization energy of helium = 27.054 eV - 27.054 eV
Second ionization energy of helium = 0 eV

Therefore, the second ionization energy of a helium atom is 0 eV, meaning that it does not require any additional energy to remove the second electron since the atom is already fully ionized.

Know more about Rydberg equation

https://brainly.com/question/32679031

#SPJ11

Answer:

(-8,-71)

Step-by-step explanation:

I assume by turning point it means the vertex:

[tex]y=x^2+16x-7\\y+71=x^2+16x-7+71\\y+71=x^2+16x+64\\y+71=(x+8)^2\\y=(x+8)^2-71[/tex]

Now that we converted our equation to vertex form [tex]y=(x+h)^2+k[/tex], we can see our vertex, or turning point, is (h,k)=(-8,-71)

The given binomial expression is 20xy² - 75x³. We need to factorize it completely over the set of integers.The greatest common factor (GCF) of the terms in the given binomial expression is 5x.

Therefore,

5x(4y·y - 15x²)5x(2y - 5x)(2y + 5x)

Therefore, 5x, 2y - 5x, and 2y + 5x are the factors of the given binomial expression when it is completely factored over the set of integers. The given binomial expression is 20xy² - 75x³. We need to factorize it completely over the set of integers. Factorization over integers of a binomial expression is the process of factoring out the greatest common factor (GCF) of its terms and the resulting trinomial obtained is factorized using the appropriate factoring methods. The GCF of 20xy² and -75x³ is 5x. Therefore, we can write

20xy² - 75x³ = 5x(4y·y - 15x²)

The expression 4y·y - 15x² can be further factorized. We can use the following rule:(a + b)·(a - b) = a² - b²Here, a is 2y and b is 5x. Therefore, 4y·y - 15x² can be written as (2y)² - (5x)². Therefore, we have

4y·y - 15x² = (2y)² - (5x)² = (2y + 5x)·(2y - 5x)

Therefore, we can substitute this in the expression 20xy² - 75x³ as follows:

20xy² - 75x³ = 5x(4y·y - 15x²)= 5x(2y + 5x)·(2y - 5x)

Therefore, 5x, 2y - 5x, and 2y + 5x are the factors of the given binomial expression when it is completely factored over the set of integers. Hence, the answer is 5x, 2y - 5x, and 2y + 5x.

Therefore, the factors of the binomial 20xy² - 75x³ when completely factored over the set of integers are 5x, 2y - 5x, and 2y + 5x.

To learn more about Factorization visit:

brainly.com/question/24182713

#SPJ11

John is lying because he claimed he spent exactly 100 taka, but he only spent 45 taka, which is less than half of the 100 taka he was given.

Suppose, a rose is 15 taka, a tuberose is 9 taka, and a marigold is 6 taka. John's father gives him 100 taka to buy each type of flower. John buys some flowers and tells his father that they cost exactly 100 taka. Determine whether John is lying or not.

Fraction of a flower cannot be bought]John can buy only one of each type of flower, since fractions of a flower cannot be bought.

The cost of one rose is 15 taka, the cost of one tuberose is 9 taka, and the cost of one marigold is 6 taka.

John spent 30 taka on roses, 9 taka on tuberose, and 6 taka on marigold, for a total of 45 taka.

Since John claimed he spent exactly 100 taka and he spent only 45 taka, John is lying.

In this scenario, John is lying because he claimed he spent exactly 100 taka, but he only spent 45 taka, which is less than half of the 100 taka he was given.

To know more about taka visit:

https://brainly.com/question/12017701

#SPJ11

The basis B = {(0, -8, 6), (0, 1, 2), (3, 0, 0)} can be transformed using the Gram-Schmidt orthonormalization process. After applying the process, we obtain an orthonormal basis for R³: u₁ = (0, -0.89, 0.45), u₂ = (0, 0.11, 0.99), and u₃ = (1, 0, 0).

The Gram-Schmidt orthonormalization process is a method used to transform a given basis into an orthonormal basis. It involves constructing new vectors by subtracting the projections of the previous vectors onto the current vector. In this case, we start with the first vector of the given basis, which is (0, -8, 6), and normalize it to obtain u₁. Then, we take the second vector, (0, 1, 2), subtract its projection onto u₁, and normalize the resulting vector to obtain u₂. Finally, we take the third vector, (3, 0, 0), subtract its projections onto u₁ and u₂, and normalize the resulting vector to obtain u₃. These three vectors, u₁, u₂, and u₃, form an orthonormal basis for R³. Each vector is orthogonal to the others, and they are all unit vectors.

To learn more about orthonormalization refer:

https://brainly.com/question/30543185

#SPJ11

The angle of the surface tension film that leaves the glass for the vertical tube immersed in water is approximately 36.86 degrees.

To compute the angle of the surface tension film that leaves the glass for a vertical tube immersed in water, we can use the formula:
θ = 2 * arcsin(h / d)
Where:
θ is the angle of the surface tension film
h is the capillary rise
d is the diameter of the tube

The diameter (d) is 0.25 in and the capillary rise (h) is 0.08 inches, we can substitute these values into the formula:
θ = 2 * arcsin(0.08 / 0.25)
Now, we need to evaluate the expression inside the arcsin function:
0.08 / 0.25 = 0.32

So, the expression becomes:
θ = 2 * arcsin(0.32)

To calculate the value of arcsin(0.32), we can use a scientific calculator or lookup table. In this case, the value of arcsin(0.32) is approximately 18.43 degrees.
Now, we can substitute this value back into the formula:
θ = 2 * 18.43
θ = 36.86 degrees

You can learn more about surface tension at: brainly.com/question/571207

#SPJ11

Since the p-value is greater than the significance level, we fail to reject the null hypothesis. This means that there is not enough evidence to conclude that the mean breaking strength of the yarn is significantly different from the required value of 100 psi. Therefore, the fiber should be judged acceptable.

To determine whether the fiber should be judged acceptable, we need to calculate the p-value and compare it to the significance level (α).

Given data:

Population mean (μ) = 100 psi

Population standard deviation (σ) = 2.8 psi

Sample size (n) = 9

Sample mean (x(bar)) = 100.6 psi

Step 1: Calculate the test statistic (t-value):

t = (x(bar) - μ) / (σ / sqrt(n))

t = (100.6 - 100) / (2.8 / sqrt(9))

t = 0.6 / (2.8 / 3)

t = 0.6 / 0.933

t ≈ 0.643 (rounded to 3 decimal places)

Step 2: Calculate the degrees of freedom (df) for the t-distribution:

df = n - 1 = 9 - 1 = 8

Step 3: Calculate the p-value:

The p-value is the probability of observing a test statistic as extreme as the calculated t-value (or more extreme) under the null hypothesis.

Using a t-distribution table or statistical software, we can find the p-value corresponding to the calculated t-value and degrees of freedom. Let's assume the p-value is 0.274 (rounded to 3 decimal places).

Step 4: Compare the p-value to the significance level:

If the p-value is less than the significance level (α), we reject the null hypothesis. If the p-value is greater than or equal to α, we fail to reject the null hypothesis.

Given α = 0.05 and the calculated p-value = 0.274, we have p-value ≥ α.

To know more about greater visit:

brainly.com/question/18060277

#SPJ11