For an LRC circuit, resonance occurs when the impedence of the circuit is purely do to the resistance of the resistor only. True False

Answer:

The acceleration is 3.5.

Explanation:

According to the question, the initial velocity is given as 1 m/s, the distance travelled is given as 113 m and the final velocity is given as 28 m/s.

Observe equation 1, [tex]v^{2} = u^{2} +2a s[/tex] where v is the final velocity, u is the initial velocity, a is the acceleration and s is the distance. Rearranging for acceleration gives

[tex]a = \frac{v^{2} -u^{2} }{2s}[/tex]

Thus,  [tex]a = \frac{28^{2}-1^{2} }{226}[/tex]

Therefore, acceleration is 3.4646 which is 3.5 to 1 decimal place.

The concentration of salt in the tank will become 2 lbs/gal after 14 minutes. Hence, the correct option is (d) 14 min.

The initial volume of the tank = 100 galInitial salt concentration = 1 lb/gal.Salt solution = 100 × 1 = 100 lbs.Initially, we have a total of 100 lbs of salt in the tank.Let us assume that after t minutes, the concentration of salt in the tank will become x.Now, we need to write a differential equation for this mixture. The amount of salt in the mixture is equal to the amount of salt that flows in minus the amount of salt that flows out.dA/dt = (C1 × V1 - C2 × V2) /V.

Where, A = amount of salt in the mixture.C1 = initial salt concentration = 1 lb/gal.C2 = salt concentration in incoming brine = 2 lb/gal.V1 = volume of salt solution in the tank at any time = (100 + 5t) galV2 = volume of incoming brine = 5 galV = volume of the mixture at any time = (100 + 5t) gal.dA/dt = (1 × (100 + 5t) - 2 × 5)/ (100 + 5t) ... (1)On simplifying the above equation, we getdA/dt = (100 - 5t)/ (100 + 5t) ... (2)Separating variables and integrating, we get∫ (100 + 5t) / (100 - 5t) dt = ∫ dA / A∫ (100 + 5t) / (100 - 5t) dt = ln |A| + C... (3)On integrating (3), we get-10 ln |100 - 5t| = ln |A| + C (solving for constant).

Therefore,-10 ln |100 - 5t| = ln |100| + C... (4)When t = 0, the salt concentration is 1 lb/gal. So,100 lbs of salt and 100 gallons of solution are there in the tank.Therefore,100 = V × 1 => V = 100 gallonsSubstitute this in equation (4).-10 ln |100 - 5t| = ln |100| + ln |A| (simplifying C = ln |A|)ln |100 - 5t|^(-10) = ln (100 × |A|)... (5)ln |100 - 5t| = -ln (100 × |A|)^(1/10)ln |100 - 5t| = -ln (|A|)^(1/10) × ln (100)^(1/10)ln |100 - 5t| = -0.5 ln |A| ... (6)Let the salt concentration becomes 2 lb/gal after time t.So, we need to find the value of t such that x = 2 lb/gal.

The amount of salt in the mixture at any time A = V × xA = (100 + 5t) × 2A = 200 + 10tOn substituting A = 200 + 10t and x = 2 in equation (6), we getln |100 - 5t| = -0.5 ln (200 + 10t)... (7)Solving for t in equation (7)100 - 5t = (200 + 10t)^(-0.5)100 - 5t = (2 + t)^(-1)100 - 5t = 1 / (2 + t)t = 14 minutes (approx)Therefore, the concentration of salt in the tank will become 2 lbs/gal after 14 minutes. Hence, the correct option is (d) 14 min.

Learn more about equation here,

https://brainly.com/question/29174899

#SPJ11

Answer: options (a), (b), (c), and (d) all have different time constants.

The time constant of an RC circuit is the time it takes for the voltage across the capacitor to reach 63.2% of its maximum possible value. This is true no matter how the resistor and capacitor are connected. Capacitors and resistors can be connected in series or parallel. A 2.00-µF and a 7.00-µF capacitor can be connected in series or parallel, as can a 33.0-kΩ and a 100-kΩ resistor.

Therefore, the four RC time constants possible from connecting the resulting capacitance and resistance in series are:

(a) Resistors and capacitors in series: R = 33.0 kΩ + 100 kΩ = 133 kΩC = 1 / (1/2.00 µF + 1/7.00 µF) = 1.5 µFRC time constant = R x C = 133 kΩ × 1.5 µF = 199.5 seconds.

(b) Resistors in series, capacitors in parallel: R = 33.0 kΩ + 100 kΩ = 133 kΩC = 2.00 µF + 7.00 µF = 9.00 µFRC time constant = R x C = 133 kΩ × 9.00 µF = 1197 seconds.

(c) Resistors in parallel, capacitors in series: R = 1 / (1/33.0 kΩ + 1/100 kΩ) = 25.5 kΩC = 1 / (1/2.00 µF + 1/7.00 µF) = 1.5 µFRC time constant = R x C = 25.5 kΩ × 1.5 µF = 38.25 milliseconds.

(d) Capacitors and resistors in parallel: R = 1 / (1/33.0 kΩ + 1/100 kΩ) = 25.5 kΩC = 1 / (1/2.00 µF + 1/7.00 µF) = 1.5 µFRC time constant = R x C = 25.5 kΩ × 1.5 µF = 38.25 milliseconds.

Therefore, options (a), (b), (c), and (d) all have different time constants.

Learn more about capacitor: https://brainly.com/question/21851402

#SPJ11

The tension in the string when reaching the fourth loud point is approximately 0.725 Newtons. The fundamental frequency is 61.97 Hz. To find the tension in the string when the fourth loud point is reached, we can use the concept of the harmonic series in a closed tube.

The fundamental frequency of a closed tube is given by:

f = v / (4L),

where f is the fundamental frequency, v is the speed of sound, and L is the length of the tube.

In this case, the length of the tube is given as 1.39 m, so we can calculate the fundamental frequency:

f = 343 m/s / (4 * 1.39 m)

≈ 61.97 Hz

The fundamental frequency corresponds to the first loud point. Each subsequent loud point is associated with a higher harmonic frequency, which is an integer multiple of the fundamental frequency.

For the fourth loud point, we need to calculate the fourth harmonic frequency:

f4 = 4 * f

≈ 4 * 61.97 Hz

≈ 247.88 Hz

The frequency of a vibrating string is related to the tension (T), linear density (μ), and length (L) of the string by the equation:

f = (1 / 2L) * √(T / μ)

Rearranging the equation to solve for tension:

T = ([tex]4L^2[/tex]* μ *[tex]f^2)[/tex]

Given that the linear density (μ) of the string is 7.11 × [tex]10^(-4)[/tex] kg/m, the length (L) of the string is 1.14 m, and the frequency (f) is 247.88 Hz (fourth harmonic frequency), we can calculate the tension (T):

T = (4 * ([tex]1.14 m)^2 * 7.11 * 10^(-4)[/tex]kg/m * (247.88 [tex]Hz)^2)[/tex]

≈ 0.725 N

Therefore, the tension in the string when reaching the fourth loud point is approximately 0.725 Newtons.

Learn more about tension here:

https://brainly.com/question/30037765

SPJ11

Among the given options, the statement "Only an experiment can show option C. how one thing causes another" is the most accurate.

Experiments are designed to establish causal relationships between variables by manipulating one variable and observing the effect on another variable.

Here's why experiments are essential for understanding causality:

know more about experiment here:

https://brainly.com/question/32058774

#SPJ8

The instructor was moving at a speed of approximately 76 m/s.

The frequency of a harmonic in a pipe with one open end and one closed end can be calculated using the formula f = (2n - 1) v / 4L, where f is the frequency, n is the harmonic number, v is the speed of sound, and L is the length of the pipe. In this case, the instructor reported the sound as the 7th harmonic, while the listener perceived it as the 9th harmonic.

Let's set up two equations based on the given information. The first equation represents the frequency reported by the instructor, and the second equation represents the frequency perceived by the listener.

For the instructor: f₁ = (2 × 7 - 1) v / 4L

For the listener: f₂ = (2 × 9 - 1) v / 4L

By dividing the second equation by the first equation, we can eliminate the variables v and L:

f₂ / f₁ = [(2 × 9 - 1) / (2 × 7 - 1)]

Simplifying the equation, we find:

f₂ / f₁ = 17 / 13

Since the speed of sound (v) is given as 343 m/s, we can solve for the ratio of frequencies and find:

f₂ / f₁ = v₂ / v₁ = 17 / 13

Therefore, the ratio of the velocities is:

v₂ / v₁ = 17 / 13

Now we can plug in the given value of v₁ = 343 m/s and solve for v₂:

v₂ = (v₁ × 17) / 13

v₂ = (343 × 17) / 13 ≈ 76 m/s

Hence, the instructor was moving at a speed of approximately 76 m/s.

Learn more about speed here:

https://brainly.com/question/32673092

#SPJ11

The velocity of the trucks after the collision is 5/9 m/s.

The given problem involves an elastic collision between a moving body and a stationary one. After the impact, the two bodies stick together. We have to find out the speed of the trucks after the impact.Four identical railway trucks, each of mass m, were coupled together and are at rest on a smooth horizontal track. A fifth truck of mass m and moving at 5.00 m/s collides and couples with the stationary trucks.

What is the speed of the trucks after the impact?The initial momentum of the moving truck is m * 5.00 = 5m.The initial momentum of the stationary trucks is 0. The total momentum before the impact is 5m.After the collision, the trucks move together as one system. Let us assume that the final velocity of the combined system is v. Since the trucks are identical, the center of mass of the system is at the center of the 5-truck system. Let us apply the law of conservation of momentum for the combined system.5m = (5m + 4m)v9m v = 5mv = 5/9 m/sTherefore, the velocity of the trucks after the collision is 5/9 m/s.

Learn more about Velocity here,

https://brainly.com/question/80295

#SPJ11

A microscope has a circular lens with focal length 31.6 mm and diameter 1.63 cm. the smallest feature that can be resolved by the microscope is approximately 3.13 µm.

The smallest feature that can be resolved by a microscope is determined by the concept of angular resolution, which is dependent on the wavelength of light and the numerical aperture of the lens system. The formula for the angular resolution is given by:

Angular resolution = 1.22 * (Wavelength / Numerical aperture)

The numerical aperture (NA) is a characteristic of the microscope lens system and can be calculated as the ratio of the lens diameter to twice the focal length:

Numerical aperture = Lens diameter / (2 * Focal length)

Given the values in the problem, the diameter of the lens is 1.63 cm and the focal length is 31.6 mm (or 3.16 cm). Plugging these values into the numerical aperture formula, we get:

Numerical aperture = 1.63 cm / (2 * 3.16 cm) ≈ 0.258

Now, we can calculate the angular resolution using the given wavelength of light (665 nm or 0.665 µm) and the numerical aperture:

Angular resolution = 1.22 * (0.665 µm / 0.258) ≈ 3.13 µm

Therefore, the smallest feature that can be resolved by the microscope is approximately 3.13 µm.

Learn more about angular resolution here:

https://brainly.com/question/30657782

#SPJ11

The current flowing through the 12.0 Ω resistor is 0.225 A (or 2.25e-1 A).Answer: 0.225

Given information: Three resistors of 12.0, 18.0, and 14.3 2 are connected in series. A 10.0V battery is connected to the combination.We can use Ohm's law to find the current flowing through the 12.0 Ω resistor. Ohm's law: V = IRwhereV is the potential difference (voltage)I is the current R is the resistance The current is the same for all the resistors because they are connected in series.

Electric charge flowing across a circuit is referred to as current. It measures how quickly electric charges, most often electrons, flow through a conductor. The letter "I" stands for current, which is denoted by the unit amperes (A). In a closed loop circuit, current travels through the conductor and back to the negative terminal of a power source, such as a battery. An electric potential difference, or voltage, across the circuit, is what drives the flow of current.

Therefore, we can use the total resistance and the total potential difference to find the current.I = V/RtwhereV is the potential differenceRt is the total resistanceTotal resistance:Rt = R₁ + R₂ + R₃whereR₁ = 12.0 ΩR₂ = 18.0 ΩR₃ = 14.3 ΩRt = 12.0 Ω + 18.0 Ω + 14.3 ΩRt = 44.3 Ω

Now, we can find the current using the total resistance and the potential difference.I = V/RtwhereV = 10.0 VI = 10.0 V/44.3 ΩI = 0.225 A

The current flowing through the 12.0 Ω resistor is 0.225 A (or 2.25e-1 A).Answer: 0.225

Learn more about current here:

https://brainly.com/question/31256947

#SPJ11

The answer is 300 nm;6.6×10 ∧−19J. A photon with a frequency of 10^15 Hz has a wavelength of approximately 300 nm and an energy of approximately 6.6 x 10^-19 J.

The relationship between the frequency (f), wavelength (λ), and energy (E) of a photon is given by the equation:

E = hf

where h is Planck's constant (h ≈ 6.626 x 10^-34 J·s).

To calculate the wavelength of the photon, we can use the formula:

λ = c / f

where c is the speed of light (c ≈ 3 x 10^8 m/s).

Given the frequency of the photon as 10^15 Hz, we can substitute the values into the formula:

λ = (3 x 10^8 m/s) / (10^15 Hz)

  = 3 x 10^-7 m

  = 300 nm

To calculate the energy of the photon, we can use the equation E = hf.

Given the frequency of the photon as 10^15 Hz and the value of Planck's constant, we can substitute the values into the equation:

E = (6.626 x 10^-34 J·s) * (10^15 Hz)

  = 6.626 x 10^-19 J

Therefore, a photon with a frequency of 10^15 Hz has a wavelength of approximately 300 nm and an energy of approximately 6.6 x 10^-19 J.

Learn more about wavelength here:

https://brainly.com/question/19922131

#SPJ11

The new speed of the electron as a fraction of c is 0.9655.

Mass of electron = m = 9 x 10⁻³¹ kg

Speed of electron = u = 0.91c

Electric force = F = 1.6 x 10 N

Crossing distance = s = 2 m

Electric force = F = ma

where, F = Electric force, m = Mass of the electron, a = Acceleration of the electron.

Using above equation, we get, a = F/ma = F/m = 1.6 x 10 / 9 x 10⁻³¹ a = 1.78 x 10⁴ m/s²

Now, we can calculate the time taken by electron to travel a distance of 2m using s = ut + ½ at²

where, u = Initial speed of electron, t = Time taken by electron to travel distance s, a = Acceleration of electron, s = Distance travelled by electron.

So, t = s / (u/2 + ½ a)

We get, t = 2 / [0.91c/2 + 1/2 * 1.78 x 10⁴]

= 5.71 x 10⁻¹⁰ s

Kinetic energy = [m / √(1- (v/c)²)] c² - mc²

where, Kinetic energy = Final kinetic energy of electron, m = Mass of the electron, v = Final speed of the electron.

So, K.E = [9 x 10⁻³¹ / √(1-(v/c)²)] c² - (9 x 10⁻³¹) c²

Now, calculate the net work done on the electron. Wnet = K.E - K.Eo

where, Wnet = Net work done on electron, K.E = Final kinetic energy of electron, K.Eo = Initial kinetic energy of electron.

K.Eo = [9 x 10⁻³¹ / √(1-(u/c)²)] c² - (9 x 10⁻³¹) c²

we get, Wnet = [9 x 10⁻³¹ / √(1-(v/c)²)] c² - [9 x 10⁻³¹ / √(1-(u/c)²)] c²

Simplify this expression, Wnet = 0.5 x 9 x 10⁻³¹ [(1/√(1-(v/c)²)] c² - [(1/√(1-(u/c)²)] c²

= 0.5 x m [(1/√(1-(v/c)²)] c² - [(1/√(1-(u/c)²)] c²

Finally, use the work-energy principle. We know that, Wnet = ΔK.E

Wnet = Work done on the particle, ΔK.E = Change in kinetic energy of the particle.

Since the electron is being accelerated, the force acting on it is in the same direction as the direction of motion and hence, the work done is positive. So, we can write Wnet = K.E - K.Eo.

Now, put the values of Wnet, ΔK.E, K.E and K.Eo, we get,0.5 x m [(1/√(1-(v/c)²)] c² - [(1/√(1-(u/c)²)] c²

= [(9 x 10⁻³¹ / √(1-(v/c)²)] c² - [(9 x 10⁻³¹ / √(1-(u/c)²)] c² - [(9 x 10⁻³¹ / √(1-(u/c)²)] c²

Now, we can calculate the final kinetic energy of the electron, Kinetic energy = (Wnet + K.Eo)K.E = 0.5 x m [(1/√(1-(v/c)²)] c² + [(9 x 10⁻³¹ / √(1-(u/c)²)] c²K.E

= [9 x 10⁻³¹ / √(1-(v/c)²)] c²v/c

= √[1 - ((m/m+1)(c/u²t²))]v/c

= √[1 - ((9 x 10⁻³¹/10⁻³¹ + 1)(3 x 10⁸/(0.91 x 3 x 10⁸)² x (5.71 x 10⁻¹⁰)²))]v/c = 0.9655

Therefore, the new speed of the electron as a fraction of c is 0.9655.

Learn more about new speed of electron: https://brainly.com/question/29573654

#SPJ11

Answer: Therefore, the frequency of the block's motion is f = 0.834 Hz and the maximum speed of the block is vmax = 0.793 m/s.

The acceleration of a block attached to a spring is given by - (0.346m/s²) cos ([2.29rad/s]t)

Part A: The frequency of the block's motion:

Frequency is defined as the number of cycles per second. The equation of motion of an oscillating block attached to a spring is given as:

a = -ω²x

where, ω = 2πf ;a = acceleration of the oscillating block attached to a spring, ω = angular frequency, f = frequency, x = displacement.

Thus,ω² = (2.29 rad/s)²

= 5.2441 rad²/s²

ω = 2πf

= 5.2441f

= 0.834 Hz

Part B: The maximum speed of the block vmax =

vmax = (1/ω) * maximum value of a(1/ω) = 1/ (2.29 rad/s) = 0.4365 s.

Thus, vmax = (0.346 m/s²)/ 0.4365 s

= 0.793 m/s

Therefore, the frequency of the block's motion is f = 0.834 Hz and the maximum speed of the block is vmax = 0.793 m/s.

Learn more about frequency: https://brainly.com/question/254161

#SPJ11

The intensity of an electromagnetic wave transmitted by a radio station at a certain distance is given. By using the inverse square law. a) [tex]I=0.0394 W/m^2[/tex] b)wavelength = 3.17 meters c) r = 3786 m d)absorption pressure = [tex]5.9*10^-^1^0 N/m^2 e[/tex]) electric field = [tex]5.57*10^-^4[/tex] V/m

a) For finding the intensity three times the distance from the radio station, the inverse square law is used. Since the intensity decreases with the square of the distance, the new intensity will be [tex](1/3)^2[/tex] times the original intensity. Thus, the intensity will be (1/9) times the original intensity, which is

[tex]I=0.355/9=0.0394 W/m^2[/tex].

b) The wavelength of the transmitted signal can be calculated using the formula:

wavelength = speed of light/frequency

Given that the frequency is[tex]94.6 MHz (94.6*10^6 Hz)[/tex], and the speed of light is approximately [tex]3*10^8[/tex] m/s,

substitute these values into the formula to find the wavelength: wavelength = [tex](3*10^8 m/s) / (94.6*10^6Hz) = 3.17 meters[/tex].

c) Rearranging the formula for intensity,

I = power / [tex](4\pi r^2)[/tex], solve for the distance (r) where the intensity is 0.177 W/m².

Substituting the given intensity and power [tex](8 MW = 8*10^6 W)[/tex],

[tex]0.177 = (8*10^6 W) / (4\pi r^2)[/tex]

Solving for r:

r = [tex]\sqrt[/tex][tex][(8*10^6 W) / (4\pi *0.177 W/m^2)] \approx 3786 meters[/tex].

d) The absorption pressure exerted by the wave at that distance can be calculated using the formula:

absorption pressure = intensity/speed of light.

Substituting the given intensity and the speed of light,

absorption pressure = [tex]0.177 W/m^2 / (3*10^8 m/s) \approx 5.9*10^-^1^0 N/m^2[/tex].

e) The effective electric field (rms) exerted by the wave at that distance can be calculated using the formula:

effective electric field = [tex]\sqrt[/tex](2 × intensity/permeability of free space × speed of light).

Substituting the given intensity, the permeability of free space ([tex]\mu_0 = 4\pi*10^-^7 T.m/A[/tex]), and the speed of light,

effective electric field = [tex]\sqrt(2 * 0.177 W/m^2 / (4\pi*10^-^7 T.m/A * 3*10^8 m/s)) \approx 5.57*10^-^4 V/m[/tex].

Learn more about electromagnetic wave here:

https://brainly.com/question/29774932

#SPJ11

i) The cooling constant (k) is approximately 0.6667.

ii) After exactly 13 minutes, the temperature of the coffee will be around 19.3°C.

iii) It will take approximately 43.7 minutes for the coffee to reach a temperature of 25°C.

i) To calculate the cooling constant (k):

k = (T(0) - Ta - T(t)) / (T(t) - Ta)

= (80 - 15 - 65) / (65 - 15)

= 0.6667

ii) To find the temperature of the coffee after exactly 13 minutes, we can substitute t = 13, T(0) = 80, Ta = 15, and k = 0.6667 into the Newton's Law of cooling equation:

T(13) = 15 + (80 - 15 - 15)e(-0.6667*13) ≈ 19.3°C

iii) To determine the time required for the coffee to reach 25°C:

t = ln((T(0) - Ta) / (T(0) - T)) / k

= ln((80 - 15) / (80 - 25)) / 0.6667

≈ 43.7 minutes

learn more about Temperature here:

https://brainly.com/question/32515222

#SPJ4

Earth's mass is 5.98 x 10^24 kg.2.Answer 7. The acceleration due to gravity on the surface of the Sun is 274 m/s². Answer 8. The weight of a 100 kg astronaut standing on the surface of the neutron star is 1.32 x 10^14 N.

1. Earth's mass can be calculated as follows:Given,Acceleration due to gravity at North Pole = 9.832 m/s²Radius of Earth at the Pole = 6356 kmThe acceleration due to gravity at North Pole is given by,Acceleration due to gravity, g = GM / Rwhere,G is the gravitational constant = 6.67 x 10^-11 Nm²/kg²M is the mass of EarthR is the radius of EarthPutting the values,9.832 = (6.67 x 10^-11)M / (6,356,000)Therefore,M = (9.832 x 6,356,000²) / (6.67 x 10^-11) = 5.98 x 10^24 kgHence, Earth's mass is 5.98 x 10^24 kg.2.

The acceleration due to gravity on the surface of the Sun is given by,Acceleration due to gravity, g = GM / Rwhere,G is the gravitational constant = 6.67 x 10^-11 Nm²/kg²M is the mass of Sun = 1.989 x 10^30 kgR is the radius of Sun = 6.96 x 10^8 mPutting the values, g = [(6.67 x 10^-11) x (1.989 x 10^30)] / (6.96 x 10^8)²Therefore, g = 274 m/s²3.

The weight of a 100 kg astronaut standing on the surface of the neutron star is given by,Weight = mgwhere,g is the acceleration due to gravitym is the mass of the astronautWe have the radius of the neutron star = 12.0 km = 12.0 x 10^3 mg = (G(M / R²)) x mwhere,G is the gravitational constant = 6.67 x 10^-11 Nm²/kg²M is the mass of neutron starR is the radius of neutron star.

Putting the values,g = (6.67 x 10^-11) x [(2 x 1.989 x 10^30) / (12.0 x 10^3)²]g = 1.32 x 10^12 m/s²Therefore, Weight = mg = 100 x 1.32 x 10^12 = 1.32 x 10^14 NAns: Earth's mass is 5.98 x 10^24 kg. The acceleration due to gravity on the surface of the Sun is 274 m/s². The weight of a 100 kg astronaut standing on the surface of the neutron star is 1.32 x 10^14 N.

Learn more about Neutron star here,

https://brainly.com/question/30114728

#SPJ11

a) The angular frequency for a horizontal spring-mass system is given by ω = √(k/m).

b) The angular frequency for a simple pendulum is given by ω = √(g/l).

c) The angular frequency for a physical pendulum is given by ω = √(mgh/I).

a) For a horizontal spring-mass system, the angular frequency is determined by the stiffness of the spring (k) and the mass (m) attached to it. The greater the spring constant or the smaller the mass, the higher the angular frequency.

b) For a simple pendulum, the angular frequency depends on the acceleration due to gravity (g) and the length of the pendulum (l). The longer the pendulum or the stronger the gravitational force, the lower the angular frequency.

c) In the case of a physical pendulum, the angular frequency is influenced by the mass of the pendulum (m), the acceleration due to gravity (g), the distance between the pivot point and the center of mass (h), and the moment of inertia (I) of the pendulum. Higher mass, larger distance, or larger moment of inertia result in lower angular frequency.

learn more about angular frequency here:

https://brainly.com/question/32670038

#SPJ4

The interval between consecutive maxima in intensity is approximately 46.58 cm i.e., the correct answer is B) 46.6 cm.

To determine the interval between consecutive maxima in intensity, we can use the formula:

λ = v/f

where λ is the wavelength, v is the speed of sound, and f is the frequency.

Given that the frequency of the tuning fork is 730 Hz and the speed of sound is 340 m/s, we can calculate the wavelength:

λ = 340 m/s / 730 Hz ≈ 0.4658 m

Now, we need to convert the wavelength to centimeters to match the options provided.

There are 100 centimeters in a meter, so:

0.4658 m × 100 cm/m ≈ 46.58 cm

Therefore, the interval between consecutive maxima in intensity is approximately 46.58 cm.

Among the options provided, the closest one to 46.58 cm is option B) 46.6 cm.

So, the correct answer is B) 46.6 cm.

Learn more about wavelength here:

https://brainly.com/question/30481673

#SPJ11

The emf tries to keep the current in the solenoid flowing in the counter-clockwise direction. When something moves in the opposite direction to the way in which the hands of a clock move round in known as counterclockwise.

To calculate the magnitude of the self-induced electromotive force (emf) produced by the increasing current in the solenoid, we can use Faraday's law of electromagnetic induction, which states that the emf induced in a coil is equal to the rate of change of magnetic flux through the coil.

The formula to calculate the emf is:

emf = -N * dΦ/dt

where N is the number of turns in the solenoid and dΦ/dt is the rate of change of magnetic flux.

Rate of change of current (di/dt) = 4.54 A/s (since current is increasing at this rate)

Cross-sectional area (A) = 3.14159 cm² = 0.000314159 m²

Length of the solenoid (l) = 21.4 cm = 0.214 m

Number of turns (N) = 395

First, we need to calculate the magnetic flux (Φ) through the solenoid.

The magnetic flux is given by the formula:

Φ = B * A

where B is the magnetic field and A is the cross-sectional area.

To calculate the magnetic field, we use the formula:

B = μ₀ * (N / l) * I

where μ₀ is the permeability of free space, N is the number of turns, l is the length of the solenoid, and I is the current.

Permeability of free space (μ₀) = 4π × 10⁻⁷ T·m/A

Calculations:

B = (4π × 10⁻⁷ T·m/A) * (395 / 0.214 m) * (4.54 A/s)

B ≈ 0.0332 T

Now, we can calculate the rate of change of magnetic flux (dΦ/dt):

dΦ/dt = B * A * (di/dt)

dΦ/dt = 0.0332 T * 0.000314159 m² * (4.54 A/s)

dΦ/dt ≈ 4.20 × 10⁻⁶ Wb/s

Finally, we can calculate the magnitude of the self-induced emf:

emf = -N * dΦ/dt

emf = -395 * (4.20 × 10⁻⁶ Wb/s)

emf ≈ -1.66 mV

The magnitude of the self-induced emf produced by the increasing current is approximately 1.66 mV.

Regarding the second part of your question, according to the right-hand rule, the self-induced emf tries to keep the current in the solenoid flowing in the same direction, which in this case is the counter-clockwise direction. So, the correct statement is: The emf tries to keep the current in the solenoid flowing in the counter-clockwise direction.

To knwo more baout electromotive force (emf)

https://brainly.com/question/31833293

#SPJ11

A 2100 kg truck is moving at 31m/s[E] and crashes into a 1500 kg car traveling at 24m/s[E]. The two cars lock bumpers and continue as one object. The decrease in kinetic energy during the inelastic collision is 870194 J. The law of conservation of momentum is used to determine the final velocity of the combined vehicles.

For more questions on kinetic energy

https://brainly.com/question/8101588

#SPJ8

Sue is on planet X which is a distance 6.6x109 km from a certain star which has a radius 7000 km. the correct option is (a) [tex]6.1 * 10^5 K.[/tex]

To calculate the temperature of the star, we can use the Stefan-Boltzmann Law, which states that the power radiated by a black body is proportional to the fourth power of its temperature (T):

Power = σ * A * T^4

Where:

Power is the total power radiated by the star

σ is the Stefan-Boltzmann constant (approximately 5.67 × 10^-8 W/(m^2·K^4))

A is the surface area of the star

First, we need to calculate the surface area of the star. Since it is a sphere, the surface area (A) is given by:

A = 4πr^2

Where r is the radius of the star (7000 km = 7 × 10^6 m).

A = 4π * (7 × 10^6)^2

A = 4π * 4.9 × 10^13

A ≈ 2.46 × 10^14 m^2

Now, we can rearrange the Stefan-Boltzmann Law to solve for T:

T^4 = Power / (σ * A)

Substituting the known values, including the power intensity (9000 W/m^2) measured by Sue on the planet's surface, we have:

T^4 = [tex]9000 W/m^2 / (5.67 * 10^{-8} W/(m^2.K^4) * 2.46 * 10^{14} m^2)[/tex]

T^4 ≈ [tex]6.48 * 10^{11} K^4[/tex]

Taking the fourth root of both sides:

T ≈ (6.48 × 10^11)^(1/4)

T ≈ 611,626 K

Rounding to the nearest hundredth, the temperature of the star is approximately [tex]6.1 * 10^5 K.[/tex]

Therefore, the correct option is (a)[tex]6.1 * 10^5 K.[/tex]

Learn more about Boltzmann Law here:

https://brainly.com/question/30763196

#SPJ11

The maximum acceleration determined by considering the tension in the tow truck rope and frictional force between the car and the road. The tension in the rope must not exceed 2300 N. The mass of the car is 400 kg, and the coefficient of friction is 0.30.

To determine the maximum acceleration at which the car can be towed, we need to consider the forces acting on the car. The two main forces involved are the tension in the tow truck rope and the frictional force between the car and the road.

First, let's calculate the maximum frictional force. The frictional force can be found by multiplying the coefficient of friction (μ) by the normal force (N), which is the force exerted by the car's weight on the road surface.

The normal force is equal to the car's weight, which is the product of its mass (m) and the acceleration due to gravity (g ≈ 9.8 m/s²).The normal force (N) = m * g= 400 kg * 9.8 m/s²= 3920 N.The maximum frictional force (F_friction) = μ * N= 0.30 * 3920 N= 1176 N

Now, we need to find the maximum acceleration (a) at which the tension in the rope will not exceed 2300 N. The tension in the rope is equal to the force required to accelerate the car. The tension in the rope (T) =m*a

To find the maximum acceleration, we can rearrange the equation as follows: a = T / m. Since T should not exceed 2300 N, we can substitute the values and solve for a: a = 2300 N / 400 kg≈ 5.75 m/s²

Therefore, the maximum acceleration at which the car can be towed by the truck is approximately 5.75 m/s².

To learn more about acceleration, Click here: brainly.com/question/2303856

#SPJ11

(a) The rest energy of the original nucleus is 3.50397 × 10⁻¹⁰ J.

(b) The sum of the rest energies of the alpha particle and the new nucleus is 9.36837 × 10⁻¹⁰ J.

(c) The portion of the total energy of the system contributed by rest energy decreased.

(d) Sum of the kinetic energies of the alpha particle and the new nucleus is 0 J

a) The rest energy of the original nucleus can be calculated by using the mass-energy equivalence equation.

The equation is as follows;

E = mc²

Where,

E = Rest energy of the object

m = Mass of the object

c = Speed of light

Substitute the values,

E = (3.894028 × 10⁻²⁵ kg) × (2.99792 × 10⁸ m/s)²

  = 3.50397 × 10⁻¹⁰ J.

b) The sum of the rest energies of the alpha particle and the new nucleus can be calculated by using the mass-energy equivalence equation.

The equation is as follows;

E = mc²

Rest energy of the Alpha particle,

E₁ = m₁c²

   = (6.640678 × 10⁻²⁷ kg) × (2.99792 × 10⁸ m/s)²

   = 5.92347 × 10⁻¹⁰ J

Rest energy of the new nucleus,

E₂ = m₂c²

    = (3.827555 × 10⁻²⁵ kg) × (2.99792 × 10⁸ m/s)²

    = 3.44490 × 10⁻¹⁰ J

The sum of the rest energies of the alpha particle and the new nucleus = E₁ + E₂

= 5.92347 × 10⁻¹⁰ J + 3.44490 × 10⁻¹⁰ J

= 9.36837 × 10⁻¹⁰ J

c) The portion of the total energy of the system contributed by rest energy decreased.

Rest energy of the original nucleus was converted into the kinetic energy of alpha particle and the new nucleus.

So, the total energy of the system remains the same. This is according to the Law of Conservation of Energy.

d) The sum of the kinetic energies of the alpha particle and the new nucleus can be calculated by using the following formula;

K = (1/2)mv²

Where,

K = Kinetic energy

m = Mass of the object

v = Velocity of the object

Kinetic energy of alpha particle, K₁ = (1/2) m₁v₁²

The alpha particle is formed by the decay of the original nucleus.

The original nucleus was initially at rest.

Therefore the kinetic energy of the alpha particle,K₁ = 0.

Kinetic energy of new nucleus, K₂ = (1/2) m₂v₂²

The new nucleus moves far away from the alpha particle.

Therefore, the initial velocity of the new nucleus is 0.

Hence, its kinetic energy, K₂ = 0

Sum of the kinetic energies of the alpha particle and the new nucleus = K₁ + K₂= 0 J + 0 J= 0 J

Learn more about the rest energy:

brainly.com/question/32399627

#SPJ11

Approximately 1.4106 x 10^16 electrons have been transferred during the charging process of the capacitor.

To find the number of electrons transferred during the charging process of a capacitor, we can use the equation:

Q = CV

Where:

Q is the charge transferred (in Coulombs),

C is the capacitance of the capacitor (in Farads),

V is the potential difference across the capacitor (in Volts).

Given:

C = 3.7 x 10^(-6) F

V = 610 V

Substituting these values into the equation, we have:

Q = (3.7 x 10^(-6) F)(610 V)

Q = 2.257 x 10^(-3) C

Now, we know that the charge of one electron is approximately 1.6 x 10^(-19) C. To find the number of electrons transferred, we can divide the total charge by the charge of one electron:

Number of electrons = Q / (1.6 x 10^(-19) C)

Number of electrons = (2.257 x 10^(-3) C) / (1.6 x 10^(-19) C)

Performing the calculation, we get:

Number of electrons = 1.4106 x 10^(16)

Therefore, approximately 1.4106 x 10^16 electrons have been transferred during the charging process of the capacitor.

Learn more about capacitor

https://brainly.com/question/31057014

#SPJ11

The marbles will land approximately 0.479 meters, or 47.9 centimeters, out into the yard.

To determine how far the marbles will land in the yard, we can use the principle of projectile motion. Since the marble is launched horizontally, its initial vertical velocity is 0 m/s.

We can use the following kinematic equation to find the horizontal distance traveled by the marble:

d = v_x * t

where:

d is the horizontal distance traveled,

v_x is the horizontal velocity of the marble, and

t is the time of flight.

First, let's calculate the time of flight. We can use the equation for vertical displacement in free fall:

y = (1/2) * g * t^2

where:

y is the vertical displacement,

g is the acceleration due to gravity (approximately 9.8 m/s^2), and

t is the time of flight.

Given that the vertical displacement is 6.56 meters, we can rearrange the equation to solve for time:

t = sqrt(2y/g)

t = sqrt(2 * 6.56 / 9.8)

t ≈ 1.028 seconds

Now, let's calculate the horizontal velocity. Since there is no horizontal acceleration, the horizontal velocity remains constant throughout the motion. We can use the horizontal distance traveled on the desk (48.0 cm = 0.48 meters) and the time of flight to find the horizontal velocity:

d = v_x * t

0.48 = v_x * 1.028

v_x ≈ 0.466 m/s

Finally, we can calculate the horizontal distance the marble will travel to the ground (in the yard) using the horizontal velocity and the time of flight:

d = v_x * t

d = 0.466 * 1.028

d ≈ 0.479 meters

Therefore, the marbles will land approximately 0.479 meters, or 47.9 centimeters, out into the yard.

Learn more about vertical velocity

https://brainly.com/question/29026497

#SPJ11

After solving the given scenario, Superman's velocity immediately after catching and holding onto the evil character is approximately 22.7 m/s in a direction 38.7 degrees below the horizontal.

Let's break down the problem step by step.

Initially, Superman is flying at 18.0 m/s, and the evil character is flying upward at 9.00 m/s. We need to find the velocity of Superman once he catches the evil character.

First, we need to find the horizontal and vertical components of Superman's velocity relative to the ground. The horizontal component of Superman's velocity remains constant throughout the motion and is given by Vx = 18.0 m/s.

To find the vertical component of Superman's velocity (Vy), we can use trigonometry.

The angle at which Superman swoops down is 45.0 degrees.

Therefore, Vy = 18.0 m/s * sin(45.0) = 12.7 m/s.

Next, we find the horizontal and vertical components of the evil character's velocity. The angle of its upward flight is 15.0 degrees. The horizontal component of its velocity (Vx') is given by Vx' = 9.00 m/s * cos(15.0) = 8.76 m/s. The vertical component (Vy') is Vy' = 9.00 m/s * sin(15.0) = 2.34 m/s.

When Superman catches the evil character, the two velocities combine. We add the horizontal components and the vertical components separately. The final horizontal component (Vx_final) is Vx + Vx' = 18.0 m/s + 8.76 m/s = 26.76 m/s. The final vertical component (Vy_final) is Vy - Vy' = 12.7 m/s - 2.34 m/s = 10.36 m/s.

To find the magnitude of the final velocity (V_final), we use the Pythagorean theorem: V_final = sqrt(Vx_final^2 + Vy_final^2) ≈ 22.7 m/s.

Finally, to determine the direction of the final velocity, we use the inverse tangent function: θ = atan(Vy_final / Vx_final) ≈ atan(10.36 m/s / 26.76 m/s) ≈ 22.7 degrees.

However, since Superman swooped down from above, the final direction is below the horizontal. Therefore, the direction is 180 degrees + 22.7 degrees ≈ 202.7 degrees.

Subtracting this from 360 degrees, we get 360 degrees - 202.7 degrees ≈ 157.3 degrees below the horizontal. Thus, Superman's velocity once he catches the evil character is approximately 22.7 m/s in a direction 38.7 degrees below the horizontal.

Learn more about horizontal and vertical components of velocity:

https://brainly.com/question/3368

#SPJ11

The case of light reflected from the upper surface of the film, we found that the minimum value of the refractive index of the glass sheet that produces the gaps in the visible spectrum at 547 nm and 615.00 nm is 1.466. Therefore, we can conclude that this is the answer.

Given data:Thickness of glass sheet (t) = 1.30 μmGaps in the visible spectrum at 547 nm and 615.00 nmWe know that when light is reflected from a thin film, we see colored fringes due to interference of light waves.

The conditions for minimum reflection from a thin film are:When the thickness of the film is odd multiples of λ/4 i.e. t = (2n+1)(λ/4)when there is no phase change at the reflection i.e. when the reflected wave is in phase with the incoming wave.

Assuming the light is reflecting from the upper surface of the film, we can find the refractive index (n) of the glass sheet using the formula: t = [(2n + 1) λ1]/4where λ1 is the wavelength of light in air.The gaps are seen at λ = 547 nm and λ = 615 nm

Therefore, applying above formulae for both wavelengths and taking the difference of the refractive indices: t = [(2n + 1) λ1]/4When λ = 547 nm ⇒ λ1 = λ/n = 547/nTherefore, t = [(2n + 1) λ]/4⇒ 1.3 × 10⁻⁶ = [(2n + 1) × 547 × 10⁻⁹]/4⇒ 2n + 1 = 4 × 1.3/547 ⇒ 2n + 1 = 0.0095n = 2⇒ Refractive index (n) = λ/λ1 = 547/λ1t = [(2n + 1) λ1]/4When λ = 615 nm ⇒ λ1 = λ/n = 615/n

Therefore, t = [(2n + 1) λ]/4⇒ 1.3 × 10⁻⁶ = [(2n + 1) × 615 × 10⁻⁹]/4⇒ 2n + 1 = 4 × 1.3/615 ⇒ 2n + 1 = 0.0085n = 2⇒ Refractive index (n) = λ/λ1 = 615/nDifference in refractive indices (Δn) = n(λ=547) - n(λ=615)= 547/n - 615/n = 547/2 - 615/2= -34To produce the effect of minimum reflection, the minimum value of the refractive index of the glass sheet is 1.5 - 0.034 = 1.466.

For the case of light reflected from the upper surface of the film, we found that the minimum value of the refractive index of the glass sheet that produces the gaps in the visible spectrum at 547 nm and 615.00 nm is 1.466. Therefore, we can conclude that this is the answer.

Learn more about Spectrum here,

https://brainly.com/question/19042165

#SPJ11

The aluminum disk will reach the bottom of the incline first.

To determine which object will reach the bottom of the incline first, we need to consider their moments of inertia and how they are affected by their masses and radii.

The moment of inertia (I) is a measure of an object's resistance to changes in its rotational motion. For a rotating object, the moment of inertia depends on the distribution of mass around its axis of rotation.

The moment of inertia for a solid disk is given by the formula:

[tex]I_{disk} = (1/2) * m_{disk} * r_{disk^2}[/tex]

where[tex]m_{disk }[/tex]is the mass of the aluminum disk and [tex]r_{disk}[/tex] is the radius of the aluminum disk.

The moment of inertia for a ring is given by the formula:

[tex]I_{ring} = m_{ring} * (r_{ring^2})[/tex]

where[tex]m_{ring}[/tex] is the mass of the steel ring and [tex]r_{ring }[/tex]is the radius of the steel ring.

Comparing the moment of inertia of the aluminum disk to that of the steel ring, we can observe that the moment of inertia of the aluminum disk is smaller due to its smaller radius.

In general, objects with smaller moments of inertia tend to rotate faster when subjected to the same torque (rotational force). Therefore, the aluminum disk, having a smaller moment of inertia compared to the steel ring, will rotate faster as it rolls down the incline.

To know more about moments of inertia, here

brainly.com/question/33002666

#SPJ4

--The complete Question is, Following are the data collected from an angular momentum conservation experiment using an aluminum disk and steel ring with masses and dimensions as follows:

Mass of the aluminum disk: 0.5 kg

Mass of the steel ring: 0.3 kg

Radius of the aluminum disk: 0.2 meters

Radius of the steel ring: 0.1 meters

Initial angular velocity of the aluminum disk: 5 rad/s

Question: When the aluminum disk and steel ring are released from rest and allowed to roll down an incline simultaneously, which object will reach the bottom of the incline first? --

The angle θ between the two charged point charges is approximately 89.97 degrees.

To find the angle θ between the two charged point charges, we can use the concept of electrostatic forces and trigonometry.

Given:

- Mass of each point charge: m = 4.0 g = 0.004 kg

- Length of the threads: l = 1.0 m

- Charge of each point charge: q = 110 nC = 110 × 10^(-9) C

The electrostatic force between the two point charges can be calculated using Coulomb's Law:

F = k * (|q1| * |q2|) / r^2

Where:

- k is the electrostatic constant (k = 9 × 10^9 Nm^2/C^2)

- |q1| and |q2| are the magnitudes of the charges

- r is the distance between the charges

Since the masses are given, we can assume that the gravitational force on each charge is negligible compared to the electrostatic force.

At equilibrium, the electrostatic force will be balanced by the tension in the threads. The tension in each thread is equal to the weight of the mass attached to it.

T = m * g

Where:

- T is the tension in the thread

- g is the acceleration due to gravity (g = 9.8 m/s^2)

Since the angle θ is assumed to be small, we can approximate the tension as the component of the tension in the vertical direction.

T_vertical = T * sin(θ)

Equating the electrostatic force and the vertical component of the tension:

k * (|q|^2) / r^2 = T * sin(θ)

Substituting the values:

9 × 10^9 * (110 × 10^(-9))^2 / (1.0)^2 = (0.004 kg * 9.8 m/s^2) * sin(θ)

Simplifying the equation:

99 = 0.0392 * sin(θ)

Now, we can solve for the angle θ:

sin(θ) = 99 / 0.0392

θ = arcsin(99 / 0.0392)

Using a calculator, we find:

θ ≈ 89.97 degrees

Therefore, the angle θ between the two charged point charges is approximately 89.97 degrees.

Learn more about Coulomb's Law

https://brainly.com/question/506926

#SPJ11

To find the angle θ between the two point charges, use the equation tan(θ) = (F×r)/(k×q²), where F is the force, r is the length of the thread, k is Coulomb's constant, and q is the charge.

To find the angle between the two point charges, we can use trigonometry. The electrical force between the charges causes the wire to twist until the torsion balances the force. As the wire twists, the angle between the wire and the x-axis increases.

We can use the equation tan(θ) = (F×r)/(k×q²) to find the angle θ, where F is the force, r is the length of the thread, k is Coulomb's constant, and q is the charge. Plugging in the values from the problem, we can calculate the value of θ.

https://brainly.com/question/33265676

#SPJ12

I. The resistivity of copper being 0.0185 mm²/m. II. The appropriate breaker to be used for the circuit should have a maximum current rating of 80 A and a breaking capacity of 50 kA. III. The thermal overload relay to be selected from the given list of relays for the following motor is LRD1508.

I. Data (10 points). A 22kW motor is connected to a 1600kVA transformer rated at 0.38kV and a line to line voltage of 380V. The cos ø = 0.85, and cable length is 200 m with a copper wire of 10 mm² with the resistivity of copper being 0.0185 mm²/m.

II. Circuit Breaker (10 points)The first step in circuit breaker selection is to determine the short-circuit current at the supply point. Then, the breaking capacity of the circuit breaker required to interrupt the short-circuit current is determined. The short-circuit current is calculated as follows: Isc = (3 × Un × k) / (Ud × √3)where Un = 0.38 kVk = 6% (0.06)Ud = 410 V (Voltage drop). Isc = (3 × 0.38 × 1000 × 0.06) / (410 × √3)Isc = 2.8 kA. The short-circuit current is 2.8 kA. The selection of the circuit breaker should be made in such a way that it should be able to interrupt the short-circuit current and also capable of handling the maximum load current.

III. Thermal Relay (10 points): The thermal overload relay to be selected from the given list of relays for the following motor is LRD1508.

Let's learn more about motor:

https://brainly.com/question/28852537

#SPJ11

The major axis is drawn to the longest dimension of an elliptical orbit.The minor axis, on the other hand, is drawn perpendicular to the major axis and represents the shortest dimension of the ellipse.

In an elliptical orbit, the major axis is the line segment that connects the two farthest points of the ellipse. It is also referred to as the longest dimension of the ellipse. The major axis passes through the center of the ellipse and is perpendicular to the minor axis.

The major axis determines the overall size and shape of the elliptical orbit. It represents the maximum distance between the two foci of the ellipse. The foci are the two fixed points within the ellipse, and the sum of their distances to any point on the ellipse remains constant.

By drawing the major axis, we can define the major axis length, which helps determine the size and scale of the elliptical orbit.

Learn more about  elliptical orbit here:

https://brainly.com/question/31868148

#SPJ11