Dr. Burras argues that during your lifetime, soils should be considered a finite resource that must be carefully managed and preserved.
Dr. Burras argues that during your lifetime, soils should be considered valuable resources.Dr. Burras argues that during your lifetime, soils should be considered a non-renewable resource. This is because soil takes thousands of years to form, and once it is degraded or lost, it cannot be replaced in a human time frame. Soil is essential for growing crops and supporting ecosystems, and it plays a crucial role in regulating the Earth's climate by storing carbon.Unfortunately, soil degradation is a major global issue, with factors such as erosion, pollution, and unsustainable farming practices leading to the loss of fertile topsoil. Dr. Burras' argument highlights the urgent need for soil conservation and sustainable land management practices to ensure that future generations have access to healthy, productive soils. This includes strategies such as reducing tillage, planting cover crops, and incorporating organic matter back into the soil. By valuing and protecting soil as a non-renewable resource, we can help to ensure the long-term sustainability of our food systems and the health of our planet.
To learn more about lifetime click on the link below:
brainly.com/question/31197912
#SPJ11
Which of the relative age dating principle was employed to determine the oldest feature? A. Superposition B. Cross-cutting C. Original horizontality D. A & B only E. All of the above
The relative age dating principle employed to determine the oldest feature is the Principle of Superposition. The correct option is A
Superposition is the idea that in a sequence of undisturbed sedimentary rocks, the oldest rocks are at the bottom, and the younger rocks are on top. This principle helps geologists and scientists to establish the chronological order of rock layers and their corresponding ages.
Cross-cutting and Original Horizontality are also important relative age dating principles, but they serve different purposes. The Principle of Cross-cutting states that a feature cutting across another, such as a fault or an intrusion, is younger than the feature it cuts.
The Principle of Original Horizontality suggests that layers of sediment are initially deposited horizontally under the influence of gravity, and any tilting or folding is a result of later events.
In summary, to determine the oldest feature, the Principle of Superposition (option A) is the most relevant principle. However, it's important to note that all of these principles (Superposition, Cross-cutting, and Original Horizontality) work together to help geologists understand the history and formation of rock layers.
To know more about Superposition, refer here:
https://brainly.com/question/2069576#
#SPJ11
Complete question:
Which of the relative age dating principle was employed to determine the oldest feature?
A. Superposition
B. Cross-cutting
C. Original horizontality
D. A & B only
E. All of the above
A very well-sorted sandstone with large-scale cross-bedding indicates the sand was likely Multiple Choice deposited by water in a meandering river system. O deposited by the wind in dunes. deposited by water in a braided river system. O O deposited by a turbidity current offshore.
The meandering nature of the river system in this case is suggested by the overall characteristics of the sandstone. Turbidity currents offshore can also deposit sediments, but they would not produce the cross-bedding patterns seen in this sandstone.
The presence of large-scale cross-bedding in a well-sorted sandstone is a good indication of the conditions under which the sand was deposited. In this case, the sandstone was likely deposited by water in a meandering river system. This is because meandering rivers often have currents that can sort sediments and create cross-bedding patterns. While wind can also create cross-bedding in sand, the well-sorted nature of the ]suggests that water was the more likely depositional agent. Other types of river systems, such as braided rivers, can also produce cross-bedded sandstones. However, the meandering nature of the river system in this case is suggested by the overall characteristics of the sandstone. Turbidity currents offshore can also deposit sediments, but they would not produce the cross-bedding patterns seen in this sandstone.
Learn more about meandering nature here
https://brainly.com/question/29412382
#SPJ11
Using the drop-down menus, sort the stars by apparent brightness as seen from Earth. Brightest to Dimmest
Depending on how close a star is to Earth, it may appear brilliant even when it isn't particularly bright. The brightest stars are Sirius, Vega, Polaris, Proxima, Centauri, and Barnard's Star.
What are the stars by apparent brightness?Perceived brightness is distinct from actual brightness, which is governed by a star's luminosity, or the amount of energy it generates per unit time.
A star may appear brilliant even when it isn't very bright due to its proximity to Earth. A star that is close to Earth, however, could appear brighter than a star that is far away.
Therefore, depending on how close a star is to Earth, it may appear brilliant even when it isn't particularly bright. However, a star that is nearby Earth could be perceived as being brighter than a star that is far away.
Brightest to Dimmest:
Sirius A
Vega
Polaris
Proxima Centauri
Barnard's Star
Learn more about stars here:
brainly.com/question/31258649
#SPJ1
The given question is incomplete. the complete question is given below.
(a) Rank the following stars from the above H-R diagram in order of brightness from dimmest to brightest: Barnard's Star, Canopus, Rigel A, Sirius B, Sun.
(b) Rank the following stars from the above H-R diagram in order of brightness from brightest to dimmest: Aldebaran A, Altair, Antares, Polaris, Procyon B.
(c) Rank the following stars from the above H-R diagram in order of temperature from hottest to coolest: Aldebaran A, Altair, Antares, Mira, Rigel A.
Hi can someone help me with these two discussion post.
Streams that have achieved a graded state can be disrupted through the instigation of abrupt changes in their flow, temperature, or chemical composition.
What is the consequence of this?The catastrophic breach of a dam, for instance, could provene to constitute a radical rise in water and sediment within a particular river, leading to both flooding and erosion farther along its course.
Alternatively, contributing pollutants and wastewater may greatly differ the water chemistry and compromise aquatic life within it. Moreover, shifting climates may perturb stream habitats by morphing their temperatures and water circulation patterns, which consequently alter the species quantity and distribution present.
Read more about chemical compositions here:
https://brainly.com/question/29108029
#SPJ1
what 2 statements about political maps are accurate?
Answer:
Explanation:
1. Political maps depict the boundaries and territories of countries, states or other administrative regions.
2. Political maps typically show the locations of major cities, capital cities, and other important places such as airports, ports, and military bases.
what are the human and natural causes of hurricane maria?
The occurrence of Hurricane Maria in September 2017, which brought devastation and turmoil to the Caribbean and southeastern portions of America, can be attributed largely to both human and natural elements.
The human and natural causes of hurricane mariaNatural Causes:
Meteorological conditions: Hurricanes take shape over warm waters when an abundance of moisture and heat exists within the atmosphere.
Environmental factors: The nature and environmental disposition prevalent in the affected region have a significant impact on how violent or mild a hurricane may become.
Human Causes:
Climate change: Although climate change cannot singly result in the formulation of storms like Hurricane Maria, anthropogenic global warming can affect the frequency and potency of future hurricanes.
Deforestation and land use changes: Cutting trees for lumber, altering landscapes to suit our needs, and dismantling coastal habitats disrupts ecological balance and reduces coastal ecosystems' ability to mitigate hurricane effects.
Learn more about hurricane Maria at
https://brainly.com/question/12619551
#SPJ1
Solution, abrasion, and hydraulic action are factors involved in:
a. wave deposition.
b. moving longshore currents.
c. causing wave refraction.
d. wave erosion.
Answer:
Explanation:Ocean waves are a source of energy. In 1–2 sentences, make and justify a claim about whether ocean waves are a renewable or nonrenewable resource.(2 points)
Where do valleys tend to form in a landscape?
A)Valleys form where rock layers are resistant to erosion.
B)Valleys form where rock layers are easily erodible (soft).
C)Valleys tend to form where rocks are horizontal.
D)Valleys form where rocks are tilted.
B)Valleys tend to form where rock layers are easily erodible (soft). do valleys tend to form in a landscape
The formation of valleys in a landscape is largely determined by the geology of the area. Valleys form when water or ice erodes the landscape over a long period of time, typically following the path of least resistance. This erosion is most effective where the underlying rock layers are soft or easily erodible, allowing the water or ice to cut through the landscape and form a channel.
Rock layers that are resistant to erosion, such as hard sandstone or granite, are more likely to form ridges or plateaus than valleys. However, valleys can still form in areas where there are differences in the resistance of the rock layers, such as where a soft layer overlies a hard layer.
The orientation of the rock layers, whether they are horizontal or tilted, can also play a role in the formation of valleys. However, this is not a universal rule, and valleys can form in both horizontal and tilted rock layers depending on the specific conditions of the area.
Learn more about Valleys here
https://brainly.com/question/27916620
#SPJ11
tsunami warnings on dec. 26, 2004 arrived too late to save coastal residents of thailand, india, and Sri Lanka because:
(a) no network of responsible officials to notify.
(b) It took seismologists too long to identify the earthquake as magnitude 9 or greater.
(c) It took seismologists too long to identify the earthquake as having tsunami-generating potential.
(d) all of the above.
On December 26, 2004, tsunami warnings arrived too late to save coastal residents of Thailand, India, and Sri Lanka because (d) all of the above.
This includes:
(a) There was no network of responsible officials to notify, which made communication difficult and delayed the warning dissemination process.
(b) It took seismologists too long to identify the earthquake as of magnitude 9 or greater, which impacted the speed of their response and recognition of the potential consequences.
(c) It took seismologists too long to identify the earthquake as having tsunami-generating potential, further delaying the possibility of issuing timely warnings.
On December 26, 2004, a massive earthquake of magnitude 9.1 struck off the west coast of Sumatra, Indonesia. The earthquake triggered a series of tsunamis that devastated coastal areas in many countries, including Thailand, India, and Sri Lanka. The tsunamis struck without warning, and many people had no time to evacuate, resulting in a high number of casualties.
Although tsunami warnings were issued in some countries, including Indonesia, they arrived too late to reach the coastal areas of Thailand, India, and Sri Lanka. In some cases, there were also communication breakdowns and inadequate infrastructure, which made it difficult to deliver timely warnings and evacuate people from affected areas. The disaster prompted efforts to improve tsunami warning systems and disaster preparedness in the affected countries and globally.
Therefore, option (d) is correct.
Learn more about seismologists:
https://brainly.com/question/29414461
#SPJ11
what physical forces or conditions affect the dissolved oxygen content of water?
Several physical forces and conditions can affect the dissolved oxygen content of water, including:
Temperature: The solubility of oxygen in water decreases as temperature increases. Therefore, warm water can hold less dissolved oxygen than cold water.Pressure: The solubility of oxygen in water increases with increasing pressure. Therefore, water at high pressure can hold more dissolved oxygen than water at low pressure.Turbulence: The turbulence or agitation of water, such as in waterfalls or rapids, can increase the amount of dissolved oxygen in water by increasing the surface area of water exposed to air.Depth: The dissolved oxygen content of water generally decreases with depth because photosynthesis by aquatic plants is limited by the amount of sunlight that can penetrate the water.Salinity: The solubility of oxygen in water decreases as salinity increases. Therefore, saltwater can hold less dissolved oxygen than freshwater.Biological activity: Biological activity, such as photosynthesis and respiration by aquatic plants and animals, can greatly affect the dissolved oxygen content of water. During photosynthesis, plants release oxygen into the water, while during respiration, both plants and animals consume oxygen from the water.These physical forces and conditions can interact with each other to affect the dissolved oxygen content of water. For example, warm, stagnant, and shallow water with high salinity and low turbulence will generally have low dissolved oxygen levels, while cool, deep, and turbulent water with low salinity and high biological activity will generally have high dissolved oxygen levels.
Learn more about dissolved oxygen: https://brainly.com/question/26073928
Several physical forces and conditions can affect the dissolved oxygen content of water, including:
Temperature: The solubility of oxygen in water decreases as temperature increases. Therefore, warm water can hold less dissolved oxygen than cold water.Pressure: The solubility of oxygen in water increases with increasing pressure. Therefore, water at high pressure can hold more dissolved oxygen than water at low pressure.Turbulence: The turbulence or agitation of water, such as in waterfalls or rapids, can increase the amount of dissolved oxygen in water by increasing the surface area of water exposed to air.Depth: The dissolved oxygen content of water generally decreases with depth because photosynthesis by aquatic plants is limited by the amount of sunlight that can penetrate the water.Salinity: The solubility of oxygen in water decreases as salinity increases. Therefore, saltwater can hold less dissolved oxygen than freshwater.Biological activity: Biological activity, such as photosynthesis and respiration by aquatic plants and animals, can greatly affect the dissolved oxygen content of water. During photosynthesis, plants release oxygen into the water, while during respiration, both plants and animals consume oxygen from the water.These physical forces and conditions can interact with each other to affect the dissolved oxygen content of water. For example, warm, stagnant, and shallow water with high salinity and low turbulence will generally have low dissolved oxygen levels, while cool, deep, and turbulent water with low salinity and high biological activity will generally have high dissolved oxygen levels.
Learn more about dissolved oxygen: https://brainly.com/question/26073928
Global demand for oil increases by about ____ per year.
a. 2 percent
b. 0.5 percent
c. 25 percent
d. 10 percent
Global demand for oil increases by about A. 2 % per year.
How does oil demand change ?Oil is a key and omnipresent energy source that is critical worldwide. Its widespread use has contributed to an incremental surge in demand over several decades.
Numerous reports confirm that the international desire for oil persists and moves ahead, increasing at roughly 1-2% each year. The principal reason behind this upsurge can be attributed to the rising global population coupled with industrialization and urbanization happening on many fronts across the globe.
Find out more on oil demand at https://brainly.com/question/22411514
#SPJ1
T/F Natural mineralization produced ammonia contributes significantly to ammonia volatilization.
The given statement " Natural mineralization produced ammonia contributes significantly to ammonia volatilization." is true becasue natural mineralization produced ammonia can contribute significantly to ammonia volatilization.
Mineralization is the process by which organic nitrogen compounds in the soil are converted to inorganic forms, such as ammonium (NH4+). Ammonia (NH3) is then produced from ammonium as a result of various processes, including nitrification and volatilization. Volatilization is the process by which ammonia is converted into a gas and released into the atmosphere.
Natural mineralization of organic matter in the soil can be a significant source of ammonia volatilization, particularly in agricultural systems where nitrogen inputs are high.
You can learn more about mineralization at
https://brainly.com/question/13649652
#SPJ11
Rocks of Glacier NP exhibit sedimentary features like mudcracks, ripplemarks and stromatolites. All of these indicate that the depositional environment in northern Montana at the time was:a) a warm, shallow tropical sea near a coastlineb) a deep ocean basin adjacent to a continent ---maybec) a fast-flowing river and adjacent broad floodplaind) a deep lake basin surrounded by mountains <---this one ??
d) a deep lake basin surrounded by mountains is the most likely depositional environment indicated by the sedimentary features found in the rocks of Glacier NP in northern Montana.
d) a deep lake basin surrounded by mountains is the most likely depositional environment indicated by the sedimentary features found in the rocks of Glacier NP in northern Montana. Mudcracks and ripple marks suggest that the sediment was deposited in shallow water and exposed to air, while stromatolites indicate a quiet, shallow, and nutrient-rich environment such as a lake. The presence of mountains surrounding the basin would also provide a source of sediment and nutrients for the lake ecosystem.
Learn more about depositional environment here
https://brainly.com/question/29038474
#SPJ1
Explain the processes that cause the shape of a beach to have a distinct seasonal cycle.
Answer:
Explanation:
The energy levels of the waves and currents are different in the winter vs. the summer. This affects the beach shape and the amount of sand on the beach. Stronger winter currents leave coarser materials in the winter such as gravel and cobbles.
Sort the following statements according to whether they describe a winter or summer beach profile. Items (6 items) (Drag and drop into the appropriate area below) The beach becomes narrower. The angle of beach is flatter. The beach builds out a little. Sand is deposited on the beach. The beach angle becomes steeper. Sand is eroded from the beach during frequent storms. Categories Winter Beach Profile Summer Beach Profile Drag and drop here Drag and drop here
During winter, the beach becomes narrower with a steeper angle due to erosion caused by storms, while during summer, the beach angle becomes flatter and builds out a little with sand deposits.
Here's the sorted list of statements according to whether they describe a winter or summer beach profile:
Winter Beach Profile:
1. The beach becomes narrower.
2. The beach angle becomes steeper.
3. Sand is eroded from the beach during frequent storms.
Summer Beach Profile:
1. The angle of the beach is flatter.
2. The beach builds out a little.
3. Sand is deposited on the beach.
Learn more about storms here: brainly.com/question/29808425
#SPJ11
what is the worst possible location of an external surface flaw that could exist in the vessel (remember, neglect end effects)?
The worst possible location of an external surface flaw in a vessel would be at a highly stressed area, such as the mid-section or where the vessel experiences the maximum load.
The worst possible location of an external surface flaw in a vessel would be at a highly stressed area, such as the mid-section or where the vessel experiences the maximum load. In these areas, the presence of a surface flaw could potentially lead to a faster propagation of cracks and, ultimately, a failure of the vessel. Neglecting end effects, this mid-section would be the most critical area for an external surface flaw to occur.
Learn more about surface flaw here
https://brainly.com/question/15041657
#SPJ11
The worst possible location of an external surface flaw in a vessel would be at the point of maximum tensile stress, which typically occurs on the surface of the vessel perpendicular to the applied force or pressure.
In cylindrical vessels, this is typically at the mid-section of the vessel wall, where the stress is highest due to the bending caused by internal pressure. Therefore, if an external surface flaw were to occur at this point, it could potentially propagate and cause a catastrophic failure of the vessel.
It is important to note that other factors, such as the size, shape, and orientation of the flaw, as well as the material properties of the vessel, can also affect the likelihood and severity of failure.
To know more about Advection here
https://brainly.com/question/18803983
#SPJ4
formulate your own hypothesis based on drought
Historically, powerful countries have continued to _________ and _________ weaker nations.
Historically, powerful countries have continued to dominate and exploit weaker nations. This has often taken the form of colonization.
Where stronger countries establish control over weaker territories for their resources, labor, or strategic advantage. This process has resulted in the displacement and suffering of indigenous populations, as well as the extraction of wealth from colonized territories. In more recent times, powerful countries have used economic and political leverage to exert control over weaker nations, often leading to economic dependence and limited sovereignty. This pattern of domination has contributed to global inequality and political instability, and has been a subject of ongoing debate and critique.
Learn more about dominate here:
https://brainly.com/question/14053639
#SPJ11
Give three precautions to be taken when citing a weather station
Answer:
1). The area should be away from buildings, trees, and tall objects.
2). The ground should be free from flooding.
3). The area should have a wide open space.
Explanation:
Proper location is essential if the weather station is to provide the data necessary to estimate ET in a consistent and reliable manner.
9. While drilling, the mud is being circulated at 5 bbls/minute. The surface pressure seen at the pumps is 3,500 psi.(2 pts) Assuming the well is 7,375 ft deep, estimate is the bottomhole pressure (at 7,375 ft) under these conditions, assuming the mud weight is 11 ppg? (the bottomhole pressure is the sum of a) the surface pressure and b) the pressure caused by the column of mud in the wellbore)
Estimated bottomhole pressure at a depth of 7,375 ft under the given conditions is 7,545 psi.
To estimate the bottomhole pressure (BHP) at a depth of 7,375 ft, we need to consider the surface pressure and the pressure caused by the column of mud in the wellbore. The pressure caused by the column of mud in the wellbore can be calculated using the formula:Pressure = Mud weight x Depth x 0.052
Where: Mud weight = 11 ppg ,Depth = 7,375 ft ,0.052 = a conversion factor
So, Pressure caused by mud column = 11 x 7,375 x 0.052 = 4,045 psi .To estimate the BHP, we need to add the surface pressure and the pressure caused by the mud column. BHP = Surface pressure + Pressure caused by mud column= 3,500 psi + 4,045 psi = 7,545 psi
Therefore, the estimated bottomhole pressure at a depth of 7,375 ft under the given conditions is 7,545 psi.
To know more about pressure,refer the link:
https://brainly.com/question/29341536#
#SPJ11
In an ancient Indian story, two river gods raced down the side of what snow-covered mountain range?
Answer:
The Himalayas
Explanation:
Pls give me brainliest i beg u i will follow u aswell
Step 2: Background information about an area of study You must explain where in South Africa the study area is located. (This can be indicated on the map.) nition (degrees minutes and seconds) sit
The education system in South Africa has a complex history shaped by social, political, and economic factors. It has gone through significant changes over the years, but still faces challenges such as inequality, resource disparities, and high dropout rates.
A research background information on South Africa education:During the apartheid era, education was segregated along racial lines, with separate systems for white, black, colored, and Indian students. The education of black students was severely disadvantaged, with limited resources and poor infrastructure.
After the end of apartheid in 1994, efforts were made to address these inequalities and create a more inclusive and equitable education system. However, challenges persist, including disparities in resources and quality of education between different regions, high dropout rates, and a lack of access to quality education for many marginalized communities.
Additionally, the legacy of apartheid still impacts the education system, with issues such as language policies and curriculum transformation being debated. Despite these challenges, South Africa has made progress in increasing access to education and improving the quality of teaching and learning.
Read more about background information
brainly.com/question/24197526
#SPJ1
encircle the Philippines on the map above
Answer:
these are the philippines
The planet Bellerophon, discovered using the radial velocity method, orbits a Sun-like star every 4 days. Bellerophon is about the size of Saturn and orbits its star nearly edge-on from our perspective here on Earth.
Part 1 (4pts): Describe a likely formation and evolution scenario for Bellerophon starting from its origin in the nebular disk of its proto-star, to where we discovered it today.
Part 2 (2pts): Given your description of the above scenario, how likely is it that we will find a terrestrial-sized planet (like Earth or Mars) in this same system? Explain your reasoning.
Part 1: Bellerophon likely formed from the gas and dust in the protoplanetary disk that surrounded its Sun-like star. As the disk cooled, solid particles began to form and grow into larger objects through accretion.
As Bellerophon formed, it likely experienced interactions with other planetary bodies in the system, including gravitational interactions and collisions. These interactions could have influenced Bellerophon's orbital properties and caused it to migrate inward to its current close orbit around the star.
Part 2: Given the close proximity of Bellerophon to its star, it is less likely that we will find a terrestrial-sized planet in the same system. Terrestrial planets like Earth and Mars require solid, rocky material to form and are typically found in the inner regions of a star's habitable zone, where temperatures are not too hot or too cold for liquid water to exist.
Learn more about “ planet Bellerophon, “ visit here;
https://brainly.com/question/31474375
#SPJ4
the correct sequence of layers of the atmosphere from nearest the earth’s surface upward is:
Answer:
Explanation:From lowest to highest, the major layers are the troposphere, stratosphere, mesosphere, thermosphere and exosphere.
many historic floods are associated with the large precipitation that accompanies a(n) ; a good example is the storm named mitch in 1998 that brought 78 inches of rain in some places in a few days.
The historic floods are often associated with heavy precipitation, such as the example you gave of Hurricane Mitch in 1998.
When there is a significant amount of rainfall in a short period of time, the ground becomes saturated and is unable to absorb any more water, causing rivers and other bodies of water to overflow their banks. This can lead to severe flooding and widespread damage. In the case of Hurricane Mitch, the amount of rain that fell in some areas was unprecedented and resulted in catastrophic flooding and landslides.
A notable illustration is the storm Mitch in 1998, which dropped 78 inches of rain in some locations in a few of days.
Tropical cyclones are powerful, rotating storm systems that form over warm ocean waters. They can bring torrential rains, strong winds, and storm surges, which can lead to severe flooding. In the case of Hurricane Mitch in 1998, the immense rainfall caused extensive damage and loss of life in Central America, making it one of the deadliest and most destructive hurricanes in history.
To Know more about precipitation,
https://brainly.com/question/18109776
#SPJ11
Which of the following statements correctly explains why temperature increases with altitude in the stratosphere?
Choose one:
A) Ozone molecules in the ozone layer absorb ultraviolet radiation, causing them to vibrate faster.
B) The stratosphere is above the atmospheric layer in which weather occurs, so it receives more incoming solar radiation.
C) Atmospheric pressure in the stratosphere is lower than in the troposphere, which raises the temperature.
D) The stratosphere is closer to the Sun than the troposphere is, so it is heated more.
Option A) Ozone molecules in the ozone layer absorb ultraviolet radiation, causing them to vibrate faster. This absorption of radiation leads to an increase in temperature with altitude in the stratosphere.
Three oxygen atoms make up the chemical known as ozone or O3. Oxides of nitrogen (NOX) and volatile organic compounds (VOC), commonly referred to as hydrocarbons, undergo chemical interactions that result in ozone. Ozone is largely produced in the stratosphere by UV radiation. Atomic oxygen is created when conventional oxygen molecules (O2) are broken into two single oxygen atoms by high-energy UV photons. Ozone is created when an oxygen atom that has been released joins with another oxygen molecule.
Due of its ability to absorb a variety of UV light, ozone is incredibly valuable. Even low-energy UV radiation can cause an ozone molecule to split into a regular oxygen molecule and a free oxygen atom. This liberated oxygen atom typically rejoins an oxygen molecule to create another ozone molecule very soon.
To learn more about Ozone molecules, click here:
https://brainly.com/question/4819444
#SPJ11
did mt kilimanjaro from due to decompression melting
Answer:
Explanation:Mount Kilimanjaro formed as a result of the active continental rifting and is comprised of three volcanic cones. Volcanic activity is thought to have commenced around 1 million years ago when molten lava began to burst through fractures created by the progressively thinning lithosphere.
Tsunami models help scientists forecast which of the following? Choose all that apply. O Arrival times O Wave height O Earthquake O magnitudes Fatalities
These models do not directly forecast fatalities, as that depends on various factors like population density and infrastructure. However, the information provided by the models can be used to estimate potential impacts and casualties.
Tsunami models help scientists forecast the arrival times and wave height of tsunamis. They do not directly predict earthquake magnitudes or fatalities, but this information can be used in conjunction with other data to estimate potential impacts.
Tsunami models help scientists forecast:
- Arrival times
- Wave height
- Magnitudes
Learn more about earthquake magnitudes here:
https://brainly.com/question/15378928
#SPJ11
Explain why Nigeria moving its capital from legos to Abuja in 1991 is an example of a centripetal force for the country
Nigeria moving its capital from Legos to Abuja in 1991 is an example of a centripetal force for the country because the development is pushed towards the center of the country.
Centripetal force is the force that makes an object move in the direction of the center in a circular path. There will be some force pushing or pulling an object towards the center of the circle.
Nigeria is the richest African country and the capital city was moved to Abuja from Lagos in 1991. Abuja was located in the center of the country and the authorities decided to shift the capital to Abuja from Lagos to concentrate the development more towards the center of the country, which is an example of centripetal force.
Legos was not big enough to make more advancements and it was not structured well and it became very crowdy and dirty. So, they thought of making the development in all the sectors towards the center of the country. Finally, the capital was moved to Abuja in 1991, when Ibrahim Babangida was the head of the state.
To know more about Centripetal force, click on:https://brainly.com/question/14021112