There are approximately 0.689 moles of krypton in the gas tank.
To determine the number of moles of krypton in the gas tank, we can use the ideal gas law equation:
PV = nRT
Where:
P = pressure (in bar)
V = volume (in liters)
n = number of moles
R = ideal gas constant (0.0831 L·bar/(mol·K))
T = temperature (in Kelvin)
Given:
Pressure (P) = 5.80 bar
Volume (V) = 3.25 liters
Temperature (T) = 25.5 °C = 25.5 + 273.15 = 298.65 K
Using the ideal gas law equation, we can solve for the number of moles (n):
n = PV / RT
n = (5.80 bar * 3.25 L) / (0.0831 L·bar/(mol·K) * 298.65 K)
n ≈ 0.689 moles
Therefore, there are approximately 0.689 moles of krypton in the gas tank.
If the gas in the tank were oxygen instead of krypton, the answer would change because the molar mass of oxygen is different from that of krypton. The ideal gas law equation remains the same, but the value of n (number of moles) would be different since it depends on the molar mass of the gas. Oxygen has a molar mass of approximately 32 g/mol, while krypton has a molar mass of approximately 84 g/mol. So, the number of moles of oxygen in the gas tank would be different and can be calculated using the same ideal gas law equation, but substituting the molar mass of oxygen instead of krypton.
Learn more about ideal gas law here:
https://brainly.com/question/30458409
#SPJ11
Guys please help me ill give brainily points
When an apple is cut open and left out on a table in your kitchen it turns brown over
time when oxygen reacts with the apple. Describe what happens to oxygen atoms in
order to make O2 instead of 0 +2 i
Answer:
Alright, We all know fruits contains enzyme, so there is a reaction name enzymic browning! Actually what happens when we cut the apple and keep it open the organic enzyme molecules starts reacting with oxygen of surroundings and oxidises it!
hi trying this again :D What are ALWAYS the products of the complete combustion of a hydrocarbon? Check all that apply.
- oxygen
- water
- carbon dioxide
- hydrogen
- sulfur trioxide
it should be carbon dioxide and water
Which would be the best starting question to determine
the composition of the Outer Core and the Inner Core?
A) Are the Outer Core and the Inner Core composed of
large amounts of iron?
B) How much rock do the Outer Core and the Inner Core
contain?
C) How deep in the Earth are the Outer Core and the
Inner Core?
D) Are the Outer Core and the Inner Core composed of
large amounts of metal?
Explain how the copper could be in the lake sample near the picnic area but not have been detected by this test.
Answer:
May be the instrument is incorrect or may be error in it.
Explanation:
The copper have not been detected by this test because the test may be not for the detection of copper, may be it is used for identification of another minerals. If there is copper in the lake sample but can't be detected in the test so it means that the instrument which is used for detection is not the right one or having error in that instrument. Every mineral has a specific type of instrument that detect its presence, if we use incorrect instrument for the mineral then we can't detect the presence of that specific mineral.
Balance the chemical equation for the following redox reaction under acidic aqueous conditions with the smallest whole-number coefficients possible using the half-reaction method. On which side does H2O(l) appear, and what is its coefficient?
MnO4^-(aq)+NH3(aq)---->Mn^2+(aq)+NO2(g)
Water ([tex]H_{2}O[/tex]) appears on the product side with a coefficient of 8. To balance the given redox reaction, we can use the half-reaction method. Let's begin by balancing the reduction half-reaction and the oxidation half-reaction separately.
Reduction half-reaction: [tex]MnO_{4}^{-aq}[/tex] + [tex]8H^{+aq}[/tex] + [tex]5e^{-}[/tex] → [tex]Mn^{2+}[/tex](aq) + [tex]4H_{2}O[/tex](l)
Oxidation half-reaction: [tex]NH_{3}[/tex](aq) → [tex]NO_{2}[/tex](g) + [tex]3H^{+}[/tex](aq) + [tex]2e^{-}[/tex]
Next, we need to balance the number of electrons transferred in both half-reactions. To do this, we multiply the oxidation half-reaction by 5 and the reduction half-reaction by 2:
[tex]2NH_{3}[/tex](aq) → [tex]2NO_{2}[/tex](g) + [tex]6H^{+}[/tex](aq) + [tex]4e^{-}[/tex]
[tex]2MnO_{4}^-[/tex](aq) + [tex]16H^{+}[/tex]+(aq) + [tex]10e^{-}[/tex] → [tex]2Mn^{2+}[/tex](aq) + [tex]8H_{2}O[/tex](l)
Now, we can combine the two half-reactions and cancel out the common species:
[tex]2MnO_{4}^-[/tex](aq) + [tex]16H^{+}[/tex](aq) + [tex]10NH_{3}[/tex](aq) → [tex]2Mn^{2+}[/tex](aq) + [tex]2NO_{2}[/tex](g) + [tex]8H_{2}O[/tex](l)
From the balanced equation, we can see that water ([tex]H_{2}O[/tex]) appears on the product side with a coefficient of 8.
To know more about redox reaction, refer here:
https://brainly.com/question/13293425#
#SPJ11
calculate the linear atomic density in atoms per millimeter for the following directions in bcc tantalum, which has a lattice constant of 0.33026nm: (a) [100], (b) [110], (c) [111]
The linear atomic density in atoms per millimeter can be calculated for different crystallographic directions in bcc tantalum, which has a lattice constant of 0.33026 nm. The linear atomic density for the [100], [110], and [111] directions can be determined by dividing the number of atoms along the direction by the length of the direction.
The linear atomic density in atoms per millimeter can be calculated by dividing the number of atoms along a specific crystallographic direction by the length of that direction. In bcc (body-centered cubic) crystals, there are specific arrangements of atoms along different crystallographic directions.
(a) For the [100] direction, there is one atom per unit cell. The length of the [100] direction can be determined using the lattice constant, which is 0.33026 nm. Therefore, the linear atomic density for the [100] direction is 1 atom / (0.33026 nm) = 3.027 atoms/nm or 30.27 atoms/mm.
(b) For the [110] direction, there are two atoms per unit cell. The length of the [110] direction can be calculated by multiplying the lattice constant by the square root of 2. Therefore, the linear atomic density for the [110] direction is 2 atoms / (0.33026 nm √2) = 6.054 atoms/nm or 60.54 atoms/mm.
(c) For the [111] direction, there are three atoms per unit cell. The length of the [111] direction can be calculated by multiplying the lattice constant by the square root of 3. Therefore, the linear atomic density for the [111] direction is 3 atoms / (0.33026 nm √3) = 9.090 atoms/nm or 90.90 atoms/mm.
Thus, the linear atomic density in atoms per millimeter for the [100], [110], and [111] directions in bcc tantalum are approximately 30.27 atoms/mm, 60.54 atoms/mm, and 90.90 atoms/mm, respectively.
Learn more about atoms here: https://brainly.com/question/29712088
#SPJ11
6. Calculate the molecular mass of acetylsalicylic acid (HOOC-C6H4-OOCCH3).
The molecular mass of acetylsalicylic acid (HOOC-C6H4-OOCCH3) is 180.157 g/mol.What is molecular mass Molecular mass is the sum of the masses of all the atoms in a molecule. The unit of molecular mass is grams per mole the are (g/mol).Acetylsalicylic acid molecular
mass calculation In acetylsalicylic acid, HOOC-C6H4-OOCCH3, add the mass of each atom:Oxygen (O) = 2 x 16.00 g/mol = 32.00 g/ (C) = 9 x 12.01 g/mol = 108.09 g/mol Hydrogen (H) = 8 x 1.01 g/mol = 8.08 g/molAdd the masses of all the atoms to calculate the molecular mass:32.00 g/mol + 108.09 g/mol + 8.08 g/mol = 148.17 g/molThe molecular mass of acetylsalicylic acid is 180.157 g/mol (approximately)
Molecular mass is the mass of a molecule measured in atomic mass units (amu). The molecular mass is the sum of the atomic masses of all the atoms present in the molecule.The molecular mass formula can be written as: Molecular mass = (mass of first element × number of atoms) + (mass of second element × number of atoms) + ...The molecular mass of acetylsalicylic acid (HOOC-C6H4-OOCCH3) can be calculated by adding the mass of each atom. Here's how to calculate the molecular mass of acetylsalicylic acid:Oxygen (O) = 2 x 16.00 g/mol = 32.00 g/molCarbon (C) = 9 x 12.01 g/mol = 108.09 g/molHydrogen (H) = 8 x 1.01 g/mol = 8.08 g/molAdd the masses of all the atoms to calculate the molecular mass:32.00 g/mol + 108.09 g/mol + 8.08 g/mol = 148.17 g/molThe molecular mass of acetylsalicylic acid is 180.157 g/mol (approximately) the formula to calculate molecular mass.
To know more about molecular Visit;
https://brainly.com/question/30640129
#SPJ11
which of the following elements has the lowest first ionization eneygy A, potassium B, sodium C, calcium D, Argon
Answer:
Argon
Explanation:
Because, it is positioned down on the periodic table
Answer:
Argon
Explanation:
If you have 35 moles of sodium hydroxide (NaOH) in a 5000 mL solution, what is the concentration of the NaOH in the solution?
Answer:
7 mol.dm^3
Explanation:
formula for calculating concentration: C = n/v
Start by changing 5000ml solution to dm^3 because volume is in dm^3
1 ml = 1cm^3
then from a cm^3 to dm^3 you divide by 1000
5000ml = 5000cm^3
5000÷1000= 5dm^3
c = n/v
= 35/5
= 7mol.dm^3
HELP ASAP plz!:) I’ll give brainliest
Answer:
it is closer to the south pole
Explanation:
An unknown piece of metal absorbs 1350 J of heat as 55.0 g of the metal heats up from 20.0 oC to 47.0 oC
Answer:
[tex]C=0.91\frac{J}{g\°C}[/tex]
Explanation:
Hello there!
In this case, according to the given information, it is possible to recall the equation to calculate the heat, Q, in these calorimetry problems as shown below:
[tex]Q=mC(T_f-T_i)[/tex]
Thus, given the absorbed heat, mass and temperatures, we can easily calculate the specific heat of the metal as shown below:
[tex]C=\frac{Q}{m(T_f-T_i)}[/tex]
Then, by plugging in we obtain:
[tex]C=\frac{1350J}{55.0g(47.0\°C-20.0\°C)} \\\\C=0.91\frac{J}{g\°C}[/tex]
Best regards!
A solution is made by mixing 140. g of water and 91. g of methanol (CH3OH) Calculate the mole fraction of water in this solution. Be sure your answer has the correct number of significant digits.
The mole fraction of water in the solution is 0.62.
To calculate the mole fraction of water in the solution, we need to determine the moles of water and methanol present.
Mass of water = 140 g
Mass of methanol = 91 g
Molar mass of water (H2O) = 18.015 g/mol
Molar mass of methanol (CH3OH) = 32.04 g/mol
Step 1: Calculate the number of moles of water and methanol.
Moles of water = Mass of water / Molar mass of water
Moles of water = 140 g / 18.015 g/mol ≈ 7.773 mol
Moles of methanol = Mass of methanol / Molar mass of methanol
Moles of methanol = 91 g / 32.04 g/mol ≈ 2.840 mol
Step 2: Calculate the total moles of the solution.
Total moles = Moles of water + Moles of methanol
Total moles = 7.773 mol + 2.840 mol = 10.613 mol
Step 3: Calculate the mole fraction of water.
Mole fraction of water = Moles of water / Total moles
Mole fraction of water = 7.773 mol / 10.613 mol ≈ 0.732
The mole fraction of water in the solution is approximately 0.732.
To know more about mole, visit:
https://brainly.com/question/29367909
#SPJ11
why is there most absorbance when the solution and beam colors are different?
The reason behind the most absorbance when the solution and beam colors are different is due to the absorption spectrum.
The absorption spectrum is the range of electromagnetic radiation that a substance can absorb, and it's unique to every substance. When a beam of light passes through a substance, the substance's molecules absorb some of the light's energy.
This means that some of the light is lost, and the rest is transmitted. The amount of energy absorbed by the substance is dependent on the wavelength of the light and the substance's properties.The color of a substance is due to its ability to absorb some wavelengths of light and reflect others.
For example, a blue object reflects blue light and absorbs all other colors of light. When a blue solution is exposed to a beam of orange light, the blue solution will absorb the orange light, causing the solution to appear darker and resulting in high absorbance.
This phenomenon is known as complementary colors and is seen when a solution and a beam of light are different colors, leading to high absorbance of light.
To know more about absorption spectrum click on below link:
https://brainly.com/question/31230618#
#SPJ11
What is the relationship between the valence electrons of an atom and the chemical bonds the atom can form?
Answer:
Valence electrons are outer shell electrons with an atom and can participate in the formation of chemical bonds. In single covalent bonds, typically both atoms in the bond contribute one valence electron in order to form a shared pair. The ground state of an atom is the lowest energy state of the atom.
HELP ME WOTH QUESTION BELOW PLEASE
tip
this is just a tip not the true answer but try to add the given number
A boy is skating down the street, hits a curb, and files off the board. Why did this happened? Can y’all plz help me it’s due today!
Answer:
to much sause
Explanation:
A direct current power supply of low voltage (less than 10 volts) has lost the markings that indicate which output terminal is positive and which is negative. A chemist suggests that the power supply terminals be connected to a pair of platinum electrodes that dip into 0.1-molar KI solution. Which of the following correctly identifies the polarities of the power supply terminals? (A) A gas will be evolved only at the positive electrode. Correct or incorrect? Explanation: (B) A gas will be evolved only at the negative electrode. Correct or incorrect? Explanation: (C) A brown color will appear in the solution near the negative electrode. Correct or incorrect? Explanation: (D) A metal will be deposited on the positive electrode. Correct or incorrect? Explanation: (E) None of the methods above will identify the polarities of the power supply terminals.
A direct current power supply of low voltage (less than 10 volts) has lost the markings that indicate which output terminal is positive and which is negative. A chemist suggests that the power supply terminals be connected to a pair of platinum electrodes that dip into 0.1-molar KI solution. Only (B) A gas will be evolved only at the negative electrode correctly identifies the polarities of the power supply terminals.
When the power supply terminals are connected to a pair of platinum electrodes dipping into a 0.1-molar KI solution, the electrolysis of the solution will occur. In the process of electrolysis, the positive electrode (anode) attracts negatively charged ions (anions) and the negative electrode (cathode) attracts positively charged ions (cations).
In this case, when a gas is evolved, it indicates that reduction is occurring at the electrode. The gas evolved will be hydrogen gas (H₂) from the reduction of H⁺ ions in the KI solution.
Since hydrogen gas is evolved only at the negative electrode (cathode), the correct identification of the polarities of the power supply terminals is that a gas will be evolved only at the negative electrode.
To know more about direct current here
https://brainly.com/question/30940926
#SPJ4
please help me i need this good grade
um...id.k how to do chemistry...help please?
Answer:
NaBr
Explanation:
Answer:
um...id.k how to do chemistry...help please?
Explanation:
NaBr
Calcular una solución que contiene 250 g de cloruro de calcio en 1500 mL de solución y tiene una decidad de 1,2gr/ml
Answer:
13.89% p/p
Explanation:
El porcentaje peso a peso de una solución (%p/p) es definido como cien veces la relación entre la masa del soluto (En este caso, cloruro de calcio) y la masa de la solución. La ecuación es:
%p/p = Masa cloruro de calcio (250g)/ Masa solución * 100
Para hallar la masa de la solución debemos usar el volumen y la densidad de este:
1500mL * (1,2g / mL) = 1800g
Así, el %p/p será:
250g / 1800g * 100
13.89% p/pWhat are cathode rays
Answer:
a beam of electrons emitted from the cathode of a high-vacuum tube.
Explanation:
Cathode rays (also known as electron beam or e-beam) are electron waves that can be used in vacuum tubes.
Choose all the nucleophiles.
Choose one or more:
CH3SNa
NaNH2
H3O+
CH3OH
CH3CH2CH3
NH4+
OH-
(CH3)3CLi
Answer:
CH3CH2CH3
(CH3)3CLi
CH3SNa
Explanation:
Please help I'm so confused!! Turn the following Aufbau Diagrams into Ions
Calculate the number of grams of solute in 500.0 mL of 0.179 M KOH. A) 5.02 g B) 1.60 g C) 5.02 x103 g D) 157 g
The mass (in grams) of solute in 500 mL of 0.179 M potassium hydroxide, KOH solution is 5.02 grams (option A)
How do i determine the mass of KOH?First, we shall obtain the mole of KOH in the solution. Details below:
Volume = 500 mL = 500 / 1000 = 0.5 LMolarity = 0.179 MMole of KOH =?Mole of solute = molarity × volume
Mole of KOH = 0.179 × 0.5
Mole of KOH = 0.0895 mole
Finally, we shall determine the mass of solute, KOH in the solution. Details below:
Mole of KOH = 0.0895 moleMolar mass of KOH = 56.1 g/molMass of KOH = ?Mass = Mole × molar mass
Mass of KOH = 0.0895 × 56
Mass of KOH = 5.02 grams
Therefore, the mass of KOH present in the solution is 5.02 grams (option A)
Learn more about mass:
https://brainly.com/question/21940152
#SPJ4
Which organisms are decomposers?
Select all correct answers.
mushrooms
snake
bacteria
grass
mold
Answer:
mushrooms bacteria mold
Explanation:
Why might changes to an environment cause an organism’s population to decrease?
The shark and remora have a relationship that benefits the remora but neither helps nor harms the shark. What type of relationship is this?
commensalism
or
predation
or
mutualism
or
parasitism
Answer:
commensalism
Explanation:
It's not parasitism as the shark is not harmed in the relationship
The kidneys help the body preserve water. When an animal has not had enough to drink, the kidneys signal the body to absorb water. The animal produces little urine, so it loses less water. During this process, the kidneys work in conjunction with which body system?
Answer:
This regulatory mechanism is in conjunction with the endocrine system, particularly in the posterior pituitary gland. This is related in the secretion of vasopressin or antidiuretic hormone (ADH). In the event of dehydration or extreme thirst, the body will conserve as much fluid as possible and the posterior pituitary will secrete more ADH that will signal the kidney to reabsorb more water in the collecting tubules.
how many moles of oh−(aq) (hydroxide ions)are present in the balanced redox reaction?
A chemical equation must balance according to the rule of conservation of mass. According to the rule, mass cannot be generated or removed during a chemical process. The number of moles of hydroxide ions in the given balanced equation is 2.
A chemical equation is said to be balanced if the quantity of each type of atom in the reaction is the same on both the reactant and product sides. In a balanced chemical equation, the mass and charge are both equal.
The numbers which are used to balance the given chemical equation are known as the coefficients.
Here the balanced equation is:
2NO₃⁻(aq) + 3ClO⁻(aq) + H₂O(l) → 2NO(g) + 3ClO₂⁻(aq) + 2OH⁻(aq)
The moles of OH⁻ required is 2.
To know more about balanced equation, visit;
https://brainly.com/question/32679842
#SPJ4
What does the word Microbial mean?
Answer:
relating to or characteristic of a microorganism, especially a bacterium causing disease or fermentation.
Explanation:
ex: "skin is a major source of microbial contamination during a surgical procedure"
◕‿↼ Hey There!
Answer → Microbial means, relating to or characteristic of a microorganism, especially a bacterium causing disease or fermentation.
✨Hope This Helps!✨