Da 6.0 kg wooden crate slides across a wooden floor
at a speed of 2.4 m/s, it it takes an applica force
of 25 N to keep it going at a steady speed. What is the
coe of kinetic friction between the floor and crate?

Answers

Answer 1

Answer:coe?

Explanation:


Related Questions

If 40 N force is exerted by a box covering 2 metre square area, calculate pressure.

Answers

Force=40NArea=2m^2

[tex]\\ \sf\longmapsto Pressure=\dfrac{Force}{Area}[/tex]

[tex]\\ \sf\longmapsto Pressure=\dfrac{40}{2}[/tex]

[tex]\\ \sf\longmapsto Pressure=20Pa[/tex]

[tex] \sf \huge \red {\dag} Given[/tex]

[tex]\sf \longmapsto \: Force \: = 40 \: Newtons[/tex]

[tex]\sf \longmapsto \: Area \: = \: 2m \: Square \: ( {2m}^{2} )[/tex]

We know that the formula of Pressure is

[tex]\sf \longmapsto \: Force/Area[/tex]

Let's start.

Put the values

[tex]\sf \longmapsto \: \: P = 40 \: newtons(force)/2(Area)[/tex]

[tex]\sf \longmapsto Pressure \: 20 \: N/m^2[/tex]

[tex]\boxed{\sf\red{\boxed{ \sf Pressure ≈ \: 20 \: N/m^2}}}[/tex]

A girl pushes her little brother on his sled with a force of 300 N for 750 m.

Answers

Please find attached photograph for your answer.

Hope it helps.

Do comment if you have any query.

In fish BB-blue, BW-blue with white stripes, WW-white. Cross a white fish with a fish with blue and white stripes. What is the probability of having white fish offspring?

Answers

Answer: Juvenile fish go through various stages between birth and adulthood. When they have developed to the point where they are capable of feeding themselves, the fish are called fry. When, in addition, they have developed scales and working fins, the transition to a juvenile fish is complete and it is called a fingerling.

State a hypothesis about your estimated daily water use.

Answers

Answer

Estimates vary, but, on average, each person uses about 80-100 gallons of water per day, for indoor home uses.

Explanation:

A car weighs 14500 N. What is its mass?

Answers

Answer:

w = mg

14500 = m ×10 [g=10m/s2]

m =14500/10

m=1450kg

A state government wants to increase the taxes on cigarettes to increase tax revenue. Because cigarettes are addictive, we would expect its demand to be: ______________

a. Elastic, Thus, the government's cigarette-tax revenues would rise with a tax increase.
b. Elastic, Thus, the government's cigarette-tax revenues would fall with a tax increase.
c. Inelastic, Thus, the government's cigarette-tax revenues would rise with a tax increase.
d. Inelastic, Thus, the government's cigarette-tax revenues would fall with a tax increase.

Answers

The demand of cigarette is elastic so the government's cigarette-tax revenues would rise with a tax increase.

The demand of cigarette is elastic because of the addiction the people can buy the cigarette even at high prices and the government's cigarette-tax revenues would rise.

The demand for cigarettes is unitary elastic (−1.06) means that a 1% increase in the price of cigarette would reduce its consumption by 1.06% so we can conclude that the demand of the cigarette is elastic and the government revenues increases.

Learn more: https://brainly.com/question/25557136

An escalator in a busy shopping centre lifts people up from one floor to another. This takes 1.2 MJ every minute. What is the power output of the escalator motor? Give your answer in kW.

Answers

An escalator that takes 1.2 MJ every minute has a power output of 1200 kW.

An escalator used to lift people up from one floor to another, exerts a work (w) of 1.2 MJ in 1 minute (t).

In physics, power (P) is the amount of energy (w) transferred or converted per unit time (t).

[tex]P = \frac{w}{t} = \frac{1.2 \times 10^{6} J }{1min} = 1.2 \times 10^{6} W[/tex]

We can convert 1.2 × 10⁶ W to kW using the conversion factor 1 kW = 1000 W.

[tex]1.2 \times 10^{6} W \times \frac{1kW}{1000W} = 1200kW[/tex]

An escalator that takes 1.2 MJ every minute has a power output of 1200 kW.

Learn more: https://brainly.com/question/24328975

An object weighs 15 N in air and 13 N when submerged in mineral spirits, which has a density of 788 kg/m3. Determine the density of the object

Answers

The density of the object is 5911.94 kg/m³

An object's buoyancy is the upward force produced by a fluid in opposition to the weight of a partly or totally submerged object.

The buoyancy = weight of the object - weight in water

= 15 N - 13N

= 2 N

The buoyancy force can also be determined by using the expressed:

[tex]\mathbf{F_B = Volume (V) \times density ( \rho) \times g}[/tex]

[tex]\mathbf{2 = Volume (V) \times788 \ kg/m^3 \times9.8 }[/tex]

[tex]\mathbf{ Volume (V) = \dfrac{2}{ 788 \ kg/m^3 \times9.8 }}[/tex]

volume (v) = 2.589 × 10⁻⁴m³

Recall that:

The mass of an object can be estimated by using the formula:

Weight = mass × gravity

mass = Weight / gravity

mass = 15/9.8

mass = 1.5306 kg

The density of the object can now be calculated using the relation

Density = mass/volume

Density = 1.5306 kg / 2.589 × 10⁻⁴m³

Density = 5911.94 kg/m³

Learn more about buoyancy of an object here:

https://brainly.com/question/2205881?referrer=searchResults

What is the centripetal force acting on a 1.5 kg mass moving in a circular path with a centripetal
acceleration of 18 m/s2

Answers

The centripetal force acting on a 1.5 kg mass moving in a circular path is 27N

A centripetal force is a net force acting on an object in order to maintain the object's movement in a circular motion.

According  to Newton's first law, it states an object will continue to proceed its movement in a straight line unless acted upon by an external force.

The centripetal force is the external force at work here and  It's the net force that propels the object in a circular motion.

Using the formula for calculating centripetal force:

[tex]\mathbf{F_c = mass (m) \times acceleration (a)}[/tex]

[tex]\mathbf{F_c = 1.5 \ kg \times18 \ m/s^2}[/tex]

[tex]\mathbf{F_c = 27 \ N}[/tex]

Learn more about centripetal force here:

https://brainly.com/question/11324711?referrer=searchResults

The rate at which work is done is called

a. efficiency

b. effort time

c.

force

d. power

Please select the best answer from the choices provided

Ο Α

ОВ

ОС

Answers

Answer:

The rate at which work is done is power

If the acceleration of an object increases, what effect does this have on the Force and Mass?
A Force Increases, Mass Increases
B Force Decreases, Mass Decreases
C Force increases, Mass remains the same
D Force Decreases, Mass remains the same​

Answers

Answer:

Force Increases and Mass remains the same.

Explanation:

which wave has a higher frequency and why?

Answers

Explanation:

the figure in the left side has higher frequency.

because it has more nos. of wave in 1sec.

Of the Three elements listed, which element is NOT present in the mixture?

Element D
Element A
Element Z

Answers

Answer:

element ammmkkkv was a very good

given. force of 88N and an acceleration of 4 m/s 2 what is the mass?

Answers

Mass, m=22 kg
It is given that Force, F = 88N
Acceleration, a=4 m/s 2

helppp mee pllleasse

Answers

Answer:

up swelling moves water horizontally

Dark matter is inferred to exist because it explains the abundance of helium in the universe today. we can observe its gravitational influence on visible matter. it explains how the expansion of the universe can be accelerating. we see lots of dark patches in the sky

Answers

we can observe its gravitational influence on visible matter.

Dark matter is a term used in astrophysics to refer to matter that corresponds to approximately 80% of the matter in the universe.

Dark matter is related to the motion of galaxies because visible matter makes up only a small part of the cluster and the galaxies show signs of being composed mainly of a halo of dark matter concentrated in their center.

Learn more in: https://brainly.com/question/17548748

Dark matter is inferred to exist because Select one: a. we can observe its gravitational influence on visible matter. b. it explains how the expansion of the universe is accelerating. c. we see lots of dark patches in the sky. Clear my choice

Answers

Answer:

(a)   the gravitational influence on visible matter can not be explained by matter that can be seen.

weight of 1 kg becomes 1/6 on moon. If radius of moon is 1.76×10^6 m, then the mass of moon will be​

Answers

Answer:

7.65 x 10^22kg

sorry if im wrong!

What type of watches are used nowadays to measure time? Explain one of
them?

Answers

Answer:

Furthermore, some modern watches (like smart watches) even incorporate calculators, GPS and Bluetooth technology or have heart-rate monitoring capabilities, and some of them use radio clock technology to regularly correct the time. Most watches that are used mainly for timekeeping have quartz movements.

Explanation:

What is thermal energy.

Answers

Explanation:

thermal energy refers to the energy contained within a system that is responsible for its temperature. Heat the flow of thermal energy

The term 'thermal energy' is used differently, and often loosely, in different contexts. It refers to several distinct physical concepts, such as the internal energy, or as the enthalpy, of a body of matter and radiation; or as heat, defined as a type of energy transfer (as is thermodynamic work); or as the characteristic energy of a degree of freedom,
k
B
T
{\displaystyle k_{\mathrm {B} }T}, in a system that is described in terms of its microscopic particulate constituents, where
T
T denotes temperature and
k
B
k_{\mathrm{B}} denotes the Boltzmann constant.

I learned this last week in my Sci-tech class!

Please help :[ Hold a flat piece of paper horizontally. Lift it high in front of you, and drop it. Then crumple a piece of paper into a tight ball, hold it high in front of you, and drop it from the same height. Compare the motion of the two pieces of paper.

Answers

The one you lifted in front of you ( the flat piece of paper being holded horizontally ) goes down so slow. While the one being crumpled into a ball goes down fast. Subscribe to DreamfanBG for support.

Answer:

Answer below

Explanation:

The flat piece of paper just gently glided to the ground, as if it were a feather. It didn’t go down in a straight line, it swayed from side to side. The crumpled piece of paper seemed like it had more weight to it (although I know that it didn’t), and it fell way quicker than the flat piece of paper.

_____________________________________________________

(Hope this helps can I pls have brainlist (crown)☺️)

what causes us to perceive objects in three dimensions?

a. objects in 3-D appear to have width and height, but no depth

b. light bouncing or reflecting off an object in different ways

c. The curvature of space-time relative to objects solar mass

d. The rate of time dilation as we approach objects

Answers

Answer:

Light bouncing or reflecting off an object in different ways.

I just took a quiz and this was the answer

(k12 answer)

Light bouncing or reflecting off an object in different ways causes us to perceive objects in three-dimensions. Thus, the correct option is B.

How do we perceive objects in three dimension?

Binocular fusion permits the perception of a single clear image and it also provides extra cues for the depth perception. That is, the binocular disparity between the two images is used by the nervous system of an individual to allow the perception of a three-dimensional world where the approximate distance of an object can be determined.

The depth perception is the ability to perceive the distance to objects using the visual system and visual perception.

Therefore, the correct option is B.


Learn more about Vision here:

https://brainly.com/question/7464210

#SPJ2

using the methos of dimensions derive an expression for the centripetal force f acting on a particle of mass m mivingv with velocity v in a circle of radius r? ​

Answers

Answer:

According to the Question:

[tex]\footnotesize\implies F \propto [m]^x [v]^y [r]^z[/tex]

[tex]\footnotesize\implies F =k [m]^x [v]^y [r]^z \:...(i)[/tex]

K = Dimensionless Constant

Now, substituting Dimensions of each physical quantity in equation (I):

[tex]\footnotesize\implies [M^1L^1T^{-2}] =[M^1L^0T^0]^x [M^0L^1T^{-1}]^y [M^0L^1T^0]^z[/tex]

[tex]\footnotesize\implies [M^1L^1T^{-2}] =[M]^x [L]^{y + z} [T]^{ - y}[/tex]

On comparing the powers of LHS and RHS:

[tex]\implies \bf x = 1[/tex]

[tex]\implies - y = - 2[/tex]

[tex] \implies \bf y = 2[/tex]

[tex]\implies y + z = 1[/tex]

[tex]\implies z = 1 - 2[/tex]

[tex]\implies \bf z = - 1[/tex]

[tex]\footnotesize\implies F = [m]^x [v]^y [r]^z[/tex]

[tex]\footnotesize\implies F = [m]^1 [v]^2 [r]^{ - 1}[/tex]

[tex]\implies\footnotesize \underline{ \boxed{ \bf \red{ F = \frac{m {v}^{2} }{r} }}}[/tex]

Guys plz i need those answers as soon as possible

Answers

9) a) formula = h(ρ)g by default g=9.8m/s²

Pressure = 2×1000×9.8 = 19600Pa

b)

In a hydraulic press a force of 200N is applied to a master piston of area 25Cm2.if the press produces 500N determine the area of the piston.​

Answers

Answer:

625                                      GIVE ME BRAINLIEST ANSWER PLEASE

Explanation:

This question is based on pascal's Law.

So By Pascal's Law

=

therefore  =force on input piston =200N

                 = Force on output piston = 5000N

therefore after putting the values we get,

a)  = (25x 5000)/200

    = 625

b) area of the salve piston =  = 625

so  = 625/3.14 = 199

so     r =    = 14.10 cm

A mass of 5.00 kg in a gravitational field of 7.00 n/kg. What force acts on the mass?

Answers

Answer:

35N

Explanation:

force=mass×gravity

the mass is 5 and the gravity is 7 therefore:

force=7×5

=35N

I hope this helps

In a car race, the average speed of the car was 90 km/hr where the total
covered distance was 450 km.
1. Calculate the average speed of the car in SI unit.

Answers

Explanation:

The speedometer of a motor car showed the following speeds in km per hour at the ends of successive intervals of 3 secs. 38.9, 52.8, 64.4. 73.6, 80.9, 86.1, 90.0, 92.5 Plot the velocity – time graph in convenient units and find from the graph, (a) The distance covered while the speed increased from 80

Two 4 kg blocks hang from a rope that passes over two frictionless pulleys . What is the tension in the horizontal portion of the rope if the blocks are not moving and the rope and the two pulleys have negligible mass?

Answers

The tension in the horizontal portion of the rope provided the blocks are not moving and the rope has negligible mass is 40 N

The tension in the rope is a pulling force that acts on the rope when the mass of 4kg is placed on each side of the two frictionless pulley.

According to Newton's second Law;

Force = (Tension) = mass × acceleration due to gravity

We can say:

Tension = 4kg × 9.81 m/s²

Tension = 39.24 N

Tension = 40 N (to the nearest whole number)

Therefore, we can conclude that the tension in the horizontal portion of the rope is 40 N

Learn  more about Newton's Law here:

https://brainly.com/question/3715235?referrer=searchResults

If the submarine intends to submerge to a depth of 150 m, what pressure must it be designed to withstand

Answers

Explanation:

Hydrostatic pressure, P = hdg where d is density if the liquid ( water)

P= 150m × 1000kgm-3 × 10ms-2

P= 1.5 ×10^6 Pa

b. Ron bicycles forward with an acceleration of 2.1 m/s2. If he is applying a forward force of 195 N, what is his mass?

Answers

Answer:

92.86 kg

Explanation:

lThe mass of an object given only it's force and acceleration can be found by using the formula

[tex]m = \frac{f}{a} \\ [/tex]

f is the force

a is the acceleration

From the question

f = 195 N

a = 2.1 m/s

We have

[tex]m = \frac{195}{2.1 } = 92.857142... \\ [/tex]

We have the final answer as

92.86 kg

Hope this helps you

Other Questions
8. "___________ the car keys?" "No, I _________." *Have you / am notYou do have / doDo you have / dontAre you having / m not the tens digit was 1. The ones digit was 6. The number was between 600 and 700 what was the number Guide is to direct as reduce is to *1 pointA) decreaseB) maintainC) increaseD) preserve What is s - -32 = 383 what does s = wha molecules absorbs sunlight for photosynthesis Which of the following describes realignment? a. It takes place when one dominant party replaces another one. b. It takes place once every six elections. c. It has been predicted as inevitable in the foreseeable future. d. It takes place when a substantial group of voters switches party allegiance. e. It is of necessity tied to specific elections. im probably gonna get those scammers that are idiots but please help What type of perspective, giving the illusion of depth, is demonstrated by the sketch above? List the steps taken to create this drawing, making sure to include the reason for the line and the points on it, and how they are used to guide the drawing. please help i dont understand this! What is the furthest state from the volcano that received a measurable amount of volcanic ash during the Mount St Helens eruption For the reaction whose balanced equation is as follows, find how many grams ofzinc phosphate will be produced by the reaction of 5.00 grams of ammoniumphosphate.3 ZnCla + 2 (NH4)3PO4 Zn3(PO4)2 + 6 NHACI Which statement best describes how Hebrew beliefs developed?Question 3 options:A:Hebrew beliefs were a reflection of what the Hebrews learned from the Egyptians.B:Hebrew beliefs developed over time.C:Hebrew beliefs were all revealed in the Torah from the beginning.D:Hebrew beliefs showed that God did not really care how people treated one another. make up over half the Muslim population in Syria Simplify the ratio, 44:33 write 3 paragraphs on what climate change means/sugnificant to Order from least to greatest -0.4, -1/5, and -0.65 Which is the most relevant statement to include in an essay comparing different kinds of government?A- As of 2017 about 57 percent of large countries were democracies and 13 countries percent were dictatorshipsB-in 1800s, socialist leaders called for better conditions an equal incomes for working people.C- Karl Marx wrote that each person should work for a living and be paid according to their needs. D- Adolf Hitler was a dictator who rose to power in Germany during the Great Depression. Find the geometric mean between 18 and 7. Write your answer in radical form. 3 square root of 14 126 9 square root of 7 128 what two countries besides france supplied forces for operation overlord cite a real life situation that describes the concept of direct and inverse variation. create your own word problem and answer it. present your answer with table of values, graph and equationA need a appropriate answer, thanks...