D. 1
1.212.52
-2
12
12

Answer:

A. fault

Explanation:

When mechanical and chemical weathering breaks up materials on the Earth's surface, erosion can move them to new locations. For example, wind, water or ice can create a valley by removing material.

hope this helps :)

Answer:

1 ohm

Explanation:

resistance doesn't depend upon the length of the material as the material is same

Answer:

Employees

Explanation:

1) The corporate mission statement of Southwest Airlines states that the airline is focused on the provision of the high quality customer service that will also be given with kindness, a good nature, pride that reflect the essence of the Company

2) The mission statement for the employees is the provision of an equal opportunity and stable work environment that promotes personal development and learning.

Answer: C. Inherited traits carry the instructions for individual genes.

Explanation: bejewels I know stuff. ☆ - ~ hope this helps

Answer:

Given: 6 questions with certain values of mass and acceleration.

To find: The amount of force?

Solution:

An object with a mass of 2.0 kg accelerates 2.0 m/s2 when an unknown force is applied to it. What is the amount of the force?

                    F = m x a = 2 x 2 = 4 N

An object with a mass of 5.0 kg accelerates 8.0 m/s2 when an unknown force is applied to it. What is the amount of the force?

                     F = m x a = 5 x 8 = 40 N

An object with a mass of 1500 g (grams) accelerates 10.0 m/s2 when an unknown force is applied to it. What is the amount of the force?

Now in this mass is in grams, so converting it kg, we get:

                    1500/1000 kg = 1.5 kg

                   F = m x a = 1.5 x 10 = 15 N

Explanation:

Answer:

Because radiation does not require material medium for its propagation.

Explanation:

Radiation is one of the types of modes of heat transfer that takes place majorly in gases. Heat energy can be transferred through gases by radiation without heating up the intervening medium. Even, if the available molecules of gases are evacuated, the heat energy would propagate.

Thus, student's hands were not heated by convection since convection is a mode where material medium is required for propagation of heat energy.

Her hands are not heated by convection ​because radiation does not require material medium for its propagation.

 Radiation

Thus, student's hands were not heated by convection since convection is a mode where material medium is required for propagation of heat energy.

Learn more:

brainly.com/question/18338019

Answer:

C

Explanation:

Carbon dioxide should be the input, and oxygen should be the output.

Answer:

c

Explanation:

i got it  right :D

Answer:

Explanation:

hope this helps!

Answer:

♥ Convection.

♥ Conduction.

♥ Radiation.

                              ♥ (  お力になれて、嬉しいです！) ♥

Answer: A radiator emitting warm air and drawing in cool air.

This is due to the warm air expanding and begins to rise as it is less dense. The cool air begins to "fall" as it is denser, drawing nearer to the radiator. The radiator will then heat the cool air and it will rise. The process then continues

Answer:

It's D

Explanation:

Can't explain I'm taking a timed test(not including this question it wass related to what I looked up)

Byeee!

I hope this helped!

Answer: It’s most likely Mayonnaise and mustard.

Explanation: It’s definitely mayonnaise because it’s not possible to see the different substances and for mustard it depends on what type. Hope this helps. Good luck :)

Answer:

Mayonnaise and mustard.

Explanation:

Answer:

Answer: hydraulic press and hydraulic brakes. ... This law is useful in designing instruments like Bramah press ,Hydraulic press , Hydraulic jack etc. It is the principle in the development of hydraulic brakes , that are used in automobiles. It is also known as law of transmission of fluid pressure

Answer:

485.62 N

Explanation:

To obtain the magnitude of unbalanced forces acting on the body;

Unbalanced Force = Horizontal Component of Applied Force - Frictional Force

Frictional Force = Horizontal Component of  Applied Force - Unbalanced Force

f = frictional force  = ?

F = Applied force  = 593 N

m = mass of person = 49 kg

a = acceleration = 0.57 m/s²

θ = Angle with horizontal = 30°

Hence;

Horizontal Component of  Applied Force = (593 N)(Cos 30°)

Unbalanced Force = (49 kg)(0.57 m/s²)

f = (593 N)(Cos 30°) - (49 kg)(0.57 m/s²)

f = 513.55 N - 27.93 N

f = 485.62 N

Answer:

Strong Positive Linear Line Correlation

Explanation:

According to the diagram, there is a strong positive linear line correlation between velocity and distance of galaxies. Hubble showed that galaxies are receding away from people with a velocity that is proportional to their distance from people more distant galaxies recede faster than nearby galaxies.

About the diagram: Velocity is the distance relation among extra-galactic nebulae. Radial velocities is corrected for solar motion, are plotted against distances estimated from involved stars and mean luminosities of nebulae in a cluster. The black discs and full line represent the solution for solar motion by using the nebulae individually; the circles and broken line represent the solution combining the nebulae into groups; the cross represents the mean velocity corresponding to the mean distance of 22 nebulae whose distances could not be estimated individually.

Answer:

267 m

Explanation:

v=λf

v= [tex]2.99*10^8[/tex]m/s

λ=?

f=[tex]1.12*10^6[/tex]Hz

[tex]2.99*10^8=(1.12*10^6)[/tex]λ

λ=267 m

Answer:

It is b

Explanation:

Answer:

a. The total momentum of the trolleys which are at rest before the separation is zero

b. The total momentum of the trolleys after separation is zero

c. The momentum of the 2 kg trolley after separation is 12 kg·m/s

d. The momentum of the 3 kg trolley is -12 kg·m/s

e. The velocity of the 3 kg trolley = -4 m/s

Explanation:

a. The total momentum of the trolleys which are at rest before the separation is zero

b. By the principle of the conservation of linear momentum, the total momentum of the trolleys after separation = The total momentum of the trolleys before separation = 0

c. The momentum of the 2 kg trolley after separation = Mass × Velocity = 2 kg × 6 m/s = 12 kg·m/s

d. Given that the total momentum of the trolleys after separation is zero, the momentum of the 3 kg trolley is equal and opposite to the momentum of the 2 kg trolley = -12 kg·m/s

e. The momentum of the 3 kg trolley = Mass of the 3 kg Trolley × Velocity of the 3 kg trolley

∴ The momentum of the 3 kg trolley = 3 kg × Velocity of the 3 kg trolley = -12 kg·m/s

The velocity of the 3 kg trolley = -12 kg·m/s/(3 kg) = -4 m/s

a-The total momentum of the trolleys before separation=0

b.The total momentum of the trolleys after  separation=0

c. The momentum of 2kg trolley after  separation=12kg-m/sec

d. The momentum of 3kg trolley after separation=-12kg-m/sec

e. The velocity of the 3kg trolley=4kg-m/sec

Given-

Trolley A with mass= 2kg

Trolly B with mass= 3kg

Velocity of trolly A =6m/sec

A- Total momentum of the trolleys before separation-

Here, in this problem both the trolleys are in the rest position hence the momentum of both trolleys = 0

B- Total momentum of the trolleys after  separation-

We know that motion never changes in an isolated collection of objects,

hence the momentum of the trolleys before and after the separation=0

C- Momentum of the Trolley A (2kg)-

It is known that momentum= Mass x Velocity

[tex]P=m\times v[/tex]

[tex]P=2\times 6[/tex]

[tex]P=12[/tex]

Hence, the momentum of the 2kg trolley is 12 kg-m/sec

D- Momentum of the Trolley B (3kg)-

As we know that  motion never changes in an isolated collection of an object hence the total moment of after saparation = 0

hance the momentum of the trolley B will be equal and opposite to the momentum of trolley A=

[tex]P= -12[/tex]

Momentum of trolley B (3kg) is -12kg-m/sec

E- The velocity of the 3kg trolley-

The momentum of trolley A= Momentum of trolley B

[tex]m_{b} v_{a} =m_{b} v_{a}[/tex]

[tex]-2\times 6=3\times v_{a}[/tex]

[tex]v_{a}=-4[/tex]

The value of the velocity of the 3kg trolley is -4m/sec

For more about the momentum, follow the link below-

https://brainly.com/question/4956182

Answer:

D. 0.276 J

Explanation:

When I solved this, I got 0.275, so I chose the one closest.

To solve:

convert 17 cm and 19.2 cm to 0.17 m and 0.192 m

W(on spring) = 1/2 (0.192 m - 0.17 m)(25N)

                     = 1/2 (.022 m)(25 N)

                     = 0.275

D. 0.276 J

Work is force applied over distance.

Examples of work include lifting an object against the Earth's gravitation, driving a car up a hill, and pulling down a captive helium balloon.

Work is a mechanical form of energy.

The standard unit of work is the joule (J), equivalent to a newton - meter (N · m).

According to the question,

W = Fs

Convert 17 cm and 19.2 cm to 0.17 m and 0.192 m

W = [tex]\frac{1}{2}[/tex](0.192 m - 0.17 m)(25N)

    =[tex]\frac{1}{2}[/tex] (.022 m)(25 N)

     = 0.276 J

Learn more about work here:https://brainly.com/question/18094932

#SPJ2

Answer:

Explanation: Astronauts on the orbiting space station are weightless because... a. there is no gravity in space and they do not weigh anything. ... space is a vacuum and there is no gravity in a vacuum.

Answer:

No I believe

Explanation:

Answer: The lighter object could be pushed up a much steeper incline and for a much longer distance.

Explanation: Using the formula for work, W= F d cosФ, you can see that it takes into account distance and the angle of the incline. With a much larger incline and with much more distance to cover, eventually the lighter object would require more work than a heavier object with no incline and very little distance to cover.

Answer:0

Explanation:

because it ran out when it hit the ground

Answer:

straight anglei think

Answer:

Both will turn red

Both will turn blue

X will turn red and Y will turn blue

X will turn blue and Y will turn red

Answer:

X will turn blue and y will turn red

Explanation:

Since X has a pH of 9, it will turn blue because anything with a pH higher than 7 turns blue. Since Y has a pH of 4, it will turn red because anything with a pH lower than 7 turns red.

Answer:

300kgm/s

Explanation:

Given parameters:

Mass of TV = 30kg

Height of building  = 5m

Maximum speed  = 10m/s

Unknown:

Momentum before it hits the ground = ?

Solution:

Momentum is the quantity of motion a body possess or contains. It is expressed as;

      Momentum  = mass x velocity

 Insert the parameters and solve;

   Momentum  = 30 x 10

   Momentum  = 300kgm/s

Hi sorry for yesterday

Explanation:

The drawing showing the block is missing, so i have attached it.

Answer:

Q_p = 19575 J

Q_o = 8700 J

Q_g = 78300 J

Explanation:

We are given L0 = 0.5 m

From the image, we can see that;

Length; L = 3L0 = 3 × 0.5 = 1.5 m

Width; W = L0 = 0.5 m

Height; H = 2L0 = 2 × 0.5 = 1 m

Temperature of warmer surface; T_h = 37 ˚C

Temperature of cooler surface; T_l = 8 ˚C

thermal conductivity; k = 300 J/(s·m·C˚)

Time for which the heat flows; t = 3 s

Now, from Fourier's law of conduction, the rate of heat flow is given by;

Q/t = kA(dT/dx)

Where;

A is area

dt is change in temperature = 37 - 8 = 29°C

dx is perpendicular distance

Now, for the amount heat flow perpendicular to the pink surface, from the image dx will be the height 1 m.

Thus;

Q_p/3 = 300 × (1.5 × 0.5) × (29/1)

Q_p/3 = 6525

Q_p = 3 × 6525

Q_p = 19575 J

for the amount heat flow perpendicular to the orange surface, from the image dx will be the length 1.5 m.

Thus;

Q_o/3 = 300 × (1 × 0.5) × (29/1.5)

Q_o/3 = 2900

Q_o = 2900 × 3

Q_o = 8700 J

for the amount heat flow perpendicular to the green surface, from the image dx will be the width 0.5 m.

Thus;

Q_g/3 = 300 × (1 × 1.5) × (29/0.5)

Q_g/3 = 26100

Q_g = 26100 × 3

Q_g = 78300 J

K.E = ½ mv²

Explanation:

The formula of Kinetic Energy

K.E = ½ mv²

Where,

m = mass of object

v = velocity of object

The Standard Unit of kinetic energy is Joule, while the Imperial Unit of kinetic energy is foot-pound

-TheUnknownScientist

Answer:

[tex]\boxed{\bold { \large { \boxed {KE=\frac{1}{2} mv^2}}}}[/tex]

Explanation:

Kinetic energy formula

[tex]\displaystyle KE=\frac{1}{2} mv^2[/tex]

[tex]\displaystyle KE \Rightarrow \sf kinetic \ energy \ (J)[/tex]

[tex]\displaystyle m \Rightarrow \sf mass \ (kg)[/tex]

[tex]\displaystyle v \Rightarrow \sf velocity \ (m/s)[/tex]

Answer:

what sport bruh

Explanation:

Answer:

in wat sport exactly

Explanation:

in eat sport

Answer:

When the Sun's energy moves through space, it reaches Earth's atmosphere and finally the surface. This radiant solar energy warms the atmosphere and becomes heat energy. This heat energy is transferred throughout the planet's systems in three ways: by radiation, conduction, and convection.