Answer:
6.054×10²⁵
Explanation:
1)find number of moles of zinc
2)multiply the mole of zinc with 2
3)use the formula mol = number of particle/ avogadro constant
Total, 97.64 moles of hydrochloric acid (HCl) must have reacted.
To determine the number of moles of hydrochloric acid (HCl) that reacted, we first need to find the molar ratio between zinc (Zn) and hydrochloric acid (HCl) from the balanced chemical equation:
Zn(s) + 2 HCl(aq) → ZnCl₂(aq) + H₂(g)
From the equation, we see that 1 mole of Zn will reacts with 2 moles of HCl.
Given that 29.39 × 10²⁴ atoms of zinc reacted, we need to convert this quantity to moles. We can do this by using Avogadro's number:
1 mole of any substance = 6.022 × 10²³ atoms
Number of moles of zinc reacted = (29.39 × 10²⁴ atoms) / (6.022 × 10²³ atoms/mol)
Number of moles of zinc reacted ≈ 48.82 moles (rounded to 3 significant figures)
Now, using the molar ratio from the balanced equation, we can determine the number of moles of hydrochloric acid (HCl) that reacted:
Number of moles of HCl reacted = 2 × Number of moles of zinc reacted
Number of moles of HCl reacted ≈ 2 × 48.82 moles
≈ 97.64 moles
Therefore, approximately 97.64 moles of hydrochloric acid (HCl) must have reacted.
To know more about hydrochloric acid here
https://brainly.com/question/14519330
#SPJ2
A 50.0 g sample of an unknown substance, initially at 20.2 °C, was heated with 1.55 kJ of energy. The final temperature of the substance was 125.0 °C. Determine the specific heat of this substance.
Answer:
0.296j/g⁰c
Explanation:
we have the following information from this question before us.
mass iv substance = 50grams
we have initial temperature ti = 20.2⁰c
final temperature = 125⁰c
the energy that was provided = 155kj
we proceed with this formula
energy = mcΔT
1.55x10³ = 50 x c x (125-20.2)
1.55x10³ = c x 50gm x 104.8k
we divide through to get c
c = 1.55x10³/50g x 104.8
c = 0.296J/g⁰c
that is the specific heat of this substance.
thank you!
which dissolved first in acetone? food coloring or liquid paint?
Answer:
Liquid paint.
Explanation:
Liquid paints are dissolved first in acetone. Most of the food dyes are not soluble in acetone.
What is acetone?Acetone is an organic compound comes under the category of ketones. It contains a carbonyl group and can dissolve most of the organic solvents.
The active ends in acetone easily forms hydrogen bonds with other solvents with polar or nonpolar groups.
Xylene, benzene, toluene, aromatic azo dyes etc. are common components in paint. Which are easily miscible with acetone.
Hence, liquid paints dissolve in acetone and food dyes are hard o dissolve in it.
To learn more about acetone, refer the link below:
https://brainly.com/question/13334667
#SPJ2
what are the benefits of using supercritical fluids in EGS
Answer:
See detailed explanation.
Explanation:
Hello.
In this case, it is firstly necessary to cite that EGS accounts enhanced geothermal systems which are man-made reservoirs, placed where lots of hot rock is present but there is lack natural permeability, which requires a fluid to be injected into the subsurface to re-open it and therefore creating permeability.
Typically, water has been used for this purpose, but due to the current issue on saving water alternative methods such as supercritical fluids has been being implemented because they have better dynamic properties such as lower viscosities and therefore larger flow velocities, supercritical CO2 is easy and cheap to get as low temperatures are required to turn it in supercritical condition.
Best regards.!
All elements in the same group
Answer:
The elements in each group have the same number of electrons in the outer orbital. Those outer electrons are also called valence electrons. They are the electrons involved in chemical bonds with other elements. Every element in the first column (group one) has one electron in its outer shell.
Explanation:
I'm not really sure what the question is but I hope this helps.
If the visible light spectrum is from 400 to 700 nm, would light with an energy of 2.79 x 10^-19 J be visible with the naked eye? What is the wavelength of this light?
Answer:
713 nm. It is not visible with the naked eye.
Explanation:
Step 1: Given data
Energy of light (E): 2.79 × 10⁻¹⁹ JPlanck's constant (h): 6.63 × 10⁻³⁴ J.sSpeed of light (c): 3.00 × 10⁸ m/sWavelength (λ): ?Step 2: Calculate the wavelength of the light
We will use the Planck-Einstein equation.
E = h × c / λ
λ = h × c / E
λ = 6.63 × 10⁻³⁴ J.s × 3.00 × 10⁸ m/s / 2.79 × 10⁻¹⁹ J
λ = 7.13 × 10⁻⁷ m
Step 3: Convert "λ" to nm
We will use the relationship 1 m = 10⁹ nm.
7.13 × 10⁻⁷ m × (10⁹ nm/1 m) = 713 nm
This light is not in the 400-700 nm interval so it is not visible with the naked eye.
What is the volume of a substance that has a mass of 59 g and a density of 1.98 g/mL?
(show all work)
Answer:
29.8
Explanation:
The formula for volume is mass/ density, so 59/1.98. 29.8 is the answer.
can someone pweaseee help me on this ??
Answer:
Be
Explanation:
The atomic radius decreases as you go from left to right in a period. Be has the largest radius out of those given elements.
An element has 20 protons, 22 neutrons and 18 electrons. What is the charge for this ion?
PLZ HELP I'LL AWARD BRAINLIEST
Answer:
20 protons.
Explanation:
20 protons = 20 + charges
18 electrons = 18- charges.
The difference = 20 - 18 = +2
The charge for this ion is plus 2
It is a calcium ion. The element is number 20 on the periodic table.
The charge of the ion is +2
HOW TO DETERMINE THE CHARGE OF AN ION:
The charge of an ion is a function of the number of protons and electrons in the atom. An atom consists of three subatomic particles namely: neutron, proton and electron. The proton is positively charged while the electron is negatively charged. The charge of an atom is determined by subtracting the number of electrons from protons, that is;Charge = no. of protons - no. of electronsHence, if the protons in an atom is more than the electrons, the charge will be positive and vice versa. In this case, an element has 20 protons, 22 neutrons and 18 electrons.Therefore, the charge of the ion will be 20 protons - 18 electrons = +2
Learn more: https://brainly.com/question/19789202?referrer=searchResults
Which is denser a liquid or solid why?
Answer:
Liquids are usually less dense than solids but more dense than air. Temperature can change a liquid's density. For example, increasing the temperature of water causes the molecules to spread farther apart. The farther apart the molecules are, the less dense the water is.
Answer:
Solids are usually much more dense than liquids and gases, but not always.
Explanation:
Mercury, a metallic element that is a liquid at room temperature, is denser than many solids. Aerogel, a very unusual human-made solid, is about 500 times less dense than wate
A 7.27-gram sample of a compound is dissolved in 250. grams of benzene. The freezing point of this solution is 1.02°C below that of pure benzene. What is the molar mass of this compound? (Note: Kf for benzene = 5.12°C/m.) Ignore significant figures for this problem. Group of answer choices 36.5 g/mol 146 g/mol 292 g/mol 5.79 g/mol 73.0 g/mol
Answer:
The correct answer is 146 g/mol
Explanation:
Freezing point depression is a colligative property related to the number of particles of solute dissolved in a solvent. It is given by:
ΔTf = Kf x m
Where ΔTf is the freezing point depression (in ºC), Kf is a constant for the solvent and m is the molality of solution. From the problem, we know the following data:
ΔTf = 1.02ºC
Kf = 5.12ºC/m
From this, we can calculate the molality:
m = ΔTf/Kf = 1.02ºC/(5.12ºC/m)= 0.199 m
The molality of a solution is defined as the moles of solute per kg of solvent. Thus, we can multiply the molality by the mass of solvent in kg (250 g= 0.25 kg) to obtain the moles of solute:
0.199 mol/kg benzene x 0.25 kg = 0.0498 moles solute
There are 0.0498 moles of solute dissolved in the solution. To calculate the molar mass of the solute, we divide the mass (7.27 g) into the moles:
molar mass = mass/mol = 7.27 g/(0.0498 mol) = 145.9 g/mol ≅ 146 g/mol
Therefore, the molar mass of the compound is 146 g/mol
2-Methycyclohexanol is prepared commercially by catalytic hydrogenation of ocresol (2-methylphenol) and consists of a mixture of cis and trans isomers. (Note the spectrum is for the mixture.) (Hint: What do the peaks at 3.05 ppm and 3.75 ppm represent and what does their integration show
Answer:
Explanation:
From the information given :
The cis and trans isomer are in the ratio of 1:3, and the description of how the ratio of the cis- and trans-2-methylcyclohexanols from the 1H NMR spectrum can be explained as follows:
We are being told that the trans isomer's peak is 3.75 ppm (part per million). However, because the methyl group is far away from the OH group, it is less shilled than the cis isomer, which peaked at 3.05. Thus, the peak at 3.05 occurs in an area whose integration is three (3) times more than the peak at 3.75.
Use the image above to answer the
question.
1. (6B) What two particles are found in the
nucleus of an atom? (choose two options)
Protons
Neutrons
Nucleus
Electron
Electron cloud
Answer:
A-protons, B-nucleus, D-electrons, C-nucleus, E-electric cloud
Explanation:
List the following bonds in order of increasing ionic character: potassium to iodine, carbon to oxygen, lithium to fluorine, boron to fluorine. (Enter the two elements of the bond into the appropriate box: KI, CO, LiF, BF)
Answer:
CO < BF < KI < LiF
Explanation:
The magnitude of ionic character in a bond is dependent on the magnitude of electronegativity difference between the atoms in the bond.
Remember that no bond is 100% ionic or covalent according to Linus Pauling. However, the percentage ionic character depends on electronegativity difference between the bonding atoms and polarizability (Fajan's rules).
Between LiF and KI, Fajan's rules become very important. The Li^+ is small and highly polarizing. The stronger the polarising power of the cation and the higher the polarisability of the anion the more covalent character is expected in a bond
Forty milliliter of a liquid has a mass of 80 grams. What is the density of this substance?
Answer:
2.00g/ml
Explanation:
If water has a density of 1.00g/ml, and theres
40ml of it, it would weigh 40g
The substance is twice as dense as water, making its density 2.00g/ml
Scientists are experimenting with pure samples of isotope X which is radioactive. The sample has a mass of 20. Grams. The half-life was measured to be 232 seconds. There is a second sample that weighs 80 grams. What is the half-life of the second sample
Answer:
Explanation:
Half life of radioactive materials do not depend upon the mass of the material . It only depends upon the nature of radioactive materials . The half life of 20 g is 232 seconds . That means 20 gram will be reduced to 10 gram in 232 seconds .
Half life of 80 gram is also 232 seconds . So , 80 gram will be reduced to 40 gram in 232 second .
Please answer !! For chemistry
Answer:
a. is the correct answer
Explanation:
Which of the following molecules may show a pure rotational microwave absorption spectrum: (i) H2, (ii) HCl, (iii) CH4, (iv) CH3Cl, (v) CH2Cl2?
Answer:
Explanation:
H₂ , HCl , CH₃Cl , CH₂Cl₂ ---- Yes
CH₄ ------ No .
Symmetric molecules do not have rotational microwave absorption spectrum because they do not possess permanent dipole moment so they lack polarisability .
The pure rotational microwave absorption spectrum has been possessed by HCl and [tex]\rm \bold{CH_3Cl}[/tex].
Pure rotational microwave absorption has been consisted of the molecules having dipole and polarizability. The molecules that show the spectrum and dipole are diatomic molecules, linear molecules, spherical molecules.
(i) The hydrogen has been a diatomic molecule with symmetry thus not showing a pure rotational microwave absorption spectrum.
(ii) The HCl being a linear molecule possesses a pure rotational microwave absorption spectrum.
(iii) [tex]\rm CH_4[/tex] molecule has symmetry, thus will not possess a pure rotational microwave absorption spectrum.
(iv) [tex]\rm CH_3Cl[/tex] molecule has no symmetry, and thus possesses a pure rotational microwave absorption spectrum.
(v) [tex]\rm CH_2Cl_2[/tex] molecule with the presence of symmetry, thus lacks a pure rotational microwave absorption spectrum.
For more information about the pure rotational microwave absorption spectrum, refer to the link:
https://brainly.com/question/14215380
Sketch the titration curve for the titration of a generic weak base B with a strong acid. The titration reaction is
B+H+⇌BH+
On the curve indicate the points that correspond to the following:
a) the equivalence point.
b) the region with maximum buffering) the point where pH = pKbd) the region where pH depends only on [B]e) the region where pH depends only on [BH+]f) the region where pH depends only on the amount of excess strong acid
Answer:
Kindly check the attached picture.
Explanation:
Titration is one of the useful concept or practical in chemistry which is used in the determination of the concentration of a particular chemical specie. Without mincing words, let us dive straight into the solution to the question;
(a) Determining the equivalence point using the graph.
=> The equivalence point is the point at which there has been been "enough" addition of the acid to the base to give us the congugate acid. In the diagram showing the curve, it is the point labelled (a).
(b)The next thing is to determine the region with maximum buffering.
=> The position with the maximum buffering ranges from the point labelled (b) in the graph and it is the point when the acid and the base has been added. But the point with the maximum buffering is labeled as point (c).
(c). Determination of the point where pH = pKb.
=> The Point in which the pH = pKb is the point a
(d). The region where pH depends only on [B].
=> The starting point in the point in which the pH is dependent on the concentration of the base, [B].
(e). The region where pH depends only on [BH+].
=> This is the same point with point labelled as (a). Thus, point (a) and (e) are the same.
(f). The region where pH depends only on the amount of excess strong acid is the point labelled as (f) which is known as the post equivalence point.
What is an advantage of making plant-based products, such as cotton, instead of making petroleum-based products, such as plastics?
A Producing plant-based products requires more energy.
B Factories that make plant-based products generate more waste.
C Plants that are used to make the product can be replaced.
D All plant-based products cost more than petroleum-based products.
Answer:
Hey! sorry if im late but the
answer is :
C : Plants that are used to make the product can be replaced.
I hope this helps everyone out there!
Explanation:
i guessed lol
Answer:
C) Plants that are used to make the product can be replaced
Explanation:
Sorry I’m late I just did the test and got 100%
A block of aluminum weighing 100g is cooled from 108.4°C to 68.2°C
with the release of 1080 joules of heat. From this data, calculate the
specific heat of aluminum
Answer:
Specific heat of aluminum = 0.27 j/g.°C
Explanation:
Given data:
Mass of Al = 100 g
Initial temperature = 108.4°C
Final temperature = 68.2°C
Heat released = -1080 j
Specific heat of aluminum = ?
Solution:
Formula:
Q = m.c. ΔT
Q = amount of heat absorbed or released
m = mass of given substance
c = specific heat capacity of substance
ΔT = change in temperature
ΔT = 68.2°C - 108.4°C
ΔT = - 40.2°C
Q = m.c. ΔT
-1080 j = 100 g ×c ×- 40.2°C
-1080 j = -4020 g.°C ×c
c = -1080 j/-4020 g.°C
c = 0.27 j/g.°C
How do weathering and deposition differ? (4 points)
оа
Weathering breaks down rocks; deposition leaves them in new places.
Ob
Weathering has to do with air; deposition has to do with plants.
Ос
Weathering occurs only in summer; deposition occurs year-round.
Od
Weathering can be chemical or physical; deposition is only chemical.
Answer:
Oa. Weathering breaks down rocks; deposition leaves them in new places.
Explanation:
Did test and got it right.
The atoms of which element will gain electrons to form an ion?
oxygen
calcium
lithium
mercury
Explanation:
Oxygen will gain electrons to form ion (O²⁻).
Calcium loses electron to form ion (Ca²⁺)
Lithium loses electron to form ion (Li⁺)
Mercury loses electron to form ion (Hg²⁺)
Here it is stated in question that the element will gain electron it means electron bears negative charge.
Therefore,
Option A is correct ✔.
What volume of 1.27 M HCl is required to prepare 197.4 mL of 0.456 M HCl
Answer:
70.88 mL volume of 1.27 M of HCl is required.
Explanation:
Given data:
Initial volume = ?
Initial molarity = 1.27 M
Final volume = 197.4 mL
Final molarity = 0.456 M
Solution:
Formula:
M₁V₁ = M₂V₂
Now we will put the values in formula.
1.27 M × V₁ = 0.456 M × 197.4 mL
V₁ = 0.456 M × 197.4 mL/1.27 M
V₁ = 90.014M.mL/1.27 M
V₁ = 70.88 mL
70.88 mL volume of 1.27 M of HCl is required.
I need help plzzz this is for today please help
Answer:
4. Water from upland areas often carries sediment and pollutants. The marshy land and plants in estuaries filter these pollutants out of the water. The plants in estuaries help prevent shoreline erosion. Estuaries also protect inland areas from flooding and storm surges.
5. Dredging impacts marine organisms negatively through entrainment, habitat degradation, noise, remobilization of contaminants, sedimentation, and increases in suspended sediment concentrations.
Explanation:
The farther you go in to the ocean, the more salinity it contains. The closer you are to freshwater, the less salinity it contains. This can happen in estuaries, and estuaries are almost like brackish waters.
Hope this helps you!
. A nail is hammered into a piece of wood. *
Answer:
and now you have a nail in your wood :)
Which of the following favors the solubility of an ionic solid in a liquid solvent? Group of answer choices a large magnitude of the solvation energy of the ions a small magnitude of the lattice energy of the solute a large polarity of the solvent all of the above none of the above
Answer:
all of the above
Explanation:
The solubility of an ionic solid in a liquid solvent largely depends on three factors:
i) The solvation energy
ii) The lattice energy of the solid
iii) The polarity of the of the solvent
A large solvation energy and a small magnitude of lattice energy means that the ionic solute will dissolve very easily in the solvent.
Secondly, the solvent must have a large polarity, this is why water serves as a good solvent for most ionic solutes.
What element in the second period has the largest atomic radius?
a
neon
b
lithium
c
carbon
d
potassium
Answer:
b) Lithium
Explanation:
A volume of 80.0 mL of a 0.690 M HNO3 solution is titrated with 0.790 M KOH. Calculate the volume of KOH required to reach the equivalence point. Express your answer to three significant figures and include the appropriate units.
Given :
A volume of 80.0 mL of a 0.690 M [tex]HNO_3[/tex] solution is titrated with 0.790 M KOH.
To Find :
The volume of KOH required to reach the equivalence point.
Solution :
We know, at equivalent point :
moles of [tex]HNO_3[/tex] = moles of KOH
[tex]M_{HNO_3}V_{HNO_3}=M_{KOH}V_{KOH}\\\\0.690\times 80 = 0.790\times V_{KOH}\\\\V_{KOH}=\dfrac{0.690\times 80 }{ 0.790}\ ml\\\\V_{KOH}=69.87\ ml[/tex]
Therefore, volume of KOH required is 69.87 ml.
Hence, this is the required solution.
CHEMISTRY!! 50 POINTS!
There are 5.5 L of a gas present at -38.0 C. What is the temperature if the volume of the gas has changed to 1.30 L?
Answer:
The answer to this question is 33.8
Determine the number of moles of oxygen atoms in each of the following.
1) 4.93 mol H2O2
2) 2.01 mol N2O
Answer :
Part 1: 4.93 moles of [tex]H_2O_2[/tex] contains 9.86 moles of oxygen atoms.
Part 2: 2.01 moles of [tex]N_2O[/tex] contains 2.01 moles of oxygen atoms.
Explanation :
Part 1: 4.93 mol [tex]H_2O_2[/tex]
In 1 mole of [tex]H_2O_2[/tex], there are 2 atoms of hydrogen and 2 atoms of oxygen.
As, 1 mole of [tex]H_2O_2[/tex] contains 2 moles of oxygen atoms.
So, 4.93 moles of [tex]H_2O_2[/tex] contains [tex]4.93\times 2=9.86[/tex] moles of oxygen atoms.
Thus, 4.93 moles of [tex]H_2O_2[/tex] contains 9.86 moles of oxygen atoms.
Part 2: 2.01 mol [tex]N_2O[/tex]
In 1 mole of [tex]N_2O[/tex], there are 2 atoms of nitrogen and 1 atom of oxygen.
As, 1 mole of [tex]N_2O[/tex] contains 1 mole of oxygen atoms.
So, 2.01 moles of [tex]N_2O[/tex] contains [tex]2.01\times 1=2.01[/tex] moles of oxygen atoms.
Thus, 2.01 moles of [tex]N_2O[/tex] contains 2.01 moles of oxygen atoms.