Answer:
1) No, 2) Yes, 3) Yes
Explanation:
Refer to solubility rules to understand if a precipitate occurs between a mix of solutions.
Two solutions form a precipitate if they react to yield an insoluble product.
Let us now consider each of the reacting species one after the other.
In the first case;
Zn(NO3)2(aq) + FeI2(aq) ----> ZnI2(aq) + Fe(NO3)2(aq)
The two products of the reaction are soluble so no precipitate is formed.
In the second case;
2KBr(aq) + Pb(NO3)2(aq) ------> 2KNO3(aq) + PbBr2(s)
An insoluble product PbBr2 is formed hence a precipitate is formed.
In the third case;
NH4Br(aq) + NaOH(aq) -------> NH4OH(aq) + NaBr(aq)
No insoluble product is formed so the there is no precipitate.
Learn more: https://brainly.com/question/5019199
Cubic zirconia is a substance produced in a laboratory. It looks nearly identical to a diamond. Why is it not a mineral?
It has no definite chemical formula.
It is not crystalline in structure.
It is not a solid.
It is not naturally occurring.
Answer:
it is not naturally occuring
HELP 20 POINTS
What is the frequency of an Electromagnetic wave has with wavelength 2.94 x 10^-8 cm?
Answer:
gccdfjjkjggffffgggggbbbhb
The greater the resistance, the less current there is for a given voltage.
Please select the best answer from the choices provided
True
False
❤️❤️❤️
Answer:
The answer is True.
Help! Please! Fast! Please!
Answer:
The amplitude is higher for wave 2
Explanation:
Amplitude is the height of the wave at the greatest point
In the reaction C + O2 → CO2, 18 g of carbon react with oxygen to produce 72 g of carbon dioxide. What mass of oxygen would be needed in the reaction?
18 g
54 g
72 g
90 g
Answer:
54 g
Explanation:
Given data:
Mass of carbon = 18 g
Mass of CO₂ = 72 g
Mass of oxygen needed = ?
Solution:
Chemical reaction:
C + O₂ → CO₂
according to law of conservation mass, mass can neither be created nor destroyed in a chemical equation.
This law was given by French chemist Antoine Lavoisier in 1789. According to this law mass of reactant and mass of product must be equal, because masses are not created or destroyed in a chemical reaction.
In given photosynthesis reaction:
6CO₂ + 6H₂O + energy → C₆H₁₂O₆ + 6O₂
there are six carbon atoms, eighteen oxygen atoms and twelve hydrogen atoms on the both side of equation so this reaction followed the law of conservation of mass.
In a similar way,
C + O₂ → CO₂
18 g + X = 72
X = 72 -18
X = 54 g
Thus, 54 g of O₂ are required.
Answer:
54g
Explanation:
Converting benzoic acid to phenylmethanol
Answer:
The Conversion of Benzoic acid to Benzyl alcohol in presence of Potassium Permanganate is an oxidizing reaction where potassium permanganate is strong oxidizing agent.This reaction occurs in basic medium in presence of sodium carbonate.This reaction gives best yield in acidic medium.But it takes longer duration for reaction to complete as compared to basic medium.less duration is required which is necessary for laboratary scale
A particle that travels around the nucleus of an atom in orbitals is called a(n)
quark.
proton.
neutron.
electron.
Answer:
The electrons of an atom travel around the nucleus like a solar system or cloud. The protons and neutrons are both inside of the nucleus that the electrons travel around.
The answer is D, electrons!!
In a molecule of calcium sulfide, calcium has two valence electron bonds, and a sulfur atom has six valence electrons. How many lone pairs of electrons are present in the Lewis structure of calcium sulfide?
A. one
B. two
C. three
D. four
E. none
Also, state why.
Answer:
E
because it forms the ionic bond but not covalent.
A paint chip is placed in ethanol and curls what type of paint is it
Answer:
it is probably acrylic or latex
Explanation:
There are two types of chemical compound one is covalent compound and other is ionic compound, covalent compound formed by sharing of electron and ionic compound formed by complete transfer of electron. Therefore, the type of paint is acrylic or latex.
What is chemical Compound?Chemical Compound is a combination of molecule, Molecule forms by combination of element and element forms by combination of atoms in fixed proportion.
An ionic compound is a metal and nonmetal combined compound. Ionic compound are very hard. They have high melting and boiling point because of strong ion bond. If the chip remains flat when put in ethanol, it is probably an oil-based paint. If the chip curls, it is probably acrylic or latex. So, The type of paint is acrylic or latex.
Therefore, the type of paint is acrylic or latex.
To learn more about chemical compound, here:
brainly.com/question/26487468
#SPJ2
What are chemical equations used to represent?
Answer:
A chemical equation is the symbolic representation of a chemical reaction. The reactants (the starting substances) are written on the left, and the products (the substances found in the chemical reaction) are written on the right.
Explanation:
pliz mark brainliest
Explanation:
chemical equations are used to represent a certain reaction between reactants to form products.
Describe the characteristics
of the different sections
(families) of the periodic
table
Answer: The vertical columns on the periodic table are called groups or families because of their similar chemical behavior. All the members of a family of elements have the same number of valence electrons and similar chemical properties. The horizontal rows on the periodic table are called periods
Condensation is a phase change from?
Answer:
gas to liquid
Explanation:
think of water vapor condensing on glass when you breathe on it for a while.
Will give brainliest
Answer:
c. both gases have the same number of molecules
brainliest?
The Earth's hours is it spinning on its axis, and it takes 24
Answer:
yes? is there a question...
Explanation:
Answer:
24 hours
Explanation:
Earth spins on its axis once in every 24-hour day. At Earth's equator, the speed of Earth's spin is about 1,000 miles per hour (1,600 km per hour).
Create an atom diagram using the Bohr model. Directions Choose three elements from the following list. Use a periodic table to determine the number of protons, neutrons, and electrons. Draw a diagram of each element you have selected. Use a separate piece of paper for each element. Be sure your drawing is neat, legible, and accurate. Use this data table to record information about each element. Element #1 Element #2 Element #3 Element #4
Answer:
Explanation:
proposed an early model of the atom as a central nucleus containing protons and neutrons being orbited by electrons in shells. As previously discussed, there is a connection between the number of protons in an element, the atomic number that distinguishes one element from another, and the number of electrons it has. In all electrically-neutral atoms, the number of electrons is the same as the number of protons. Each element, when electrically neutral, has a number of electrons equal to its atomic number.
Answer:
You can check diagram with number of proton neutron and electrons
Explanation:
Which activity is an example of chemical change?
about how much of the visible side of the moon is lit up during a full moon?
A. Three fourths
B. One fourth
C. None of it
D. All of it
Answer:
D
Explanation:
i learned this in elementary
How does Gas Trapping bottles Monitor Volcanos?
( put in your own words don’t look up on internet )
I will give brainlst If you answer correctly.
Answer: the pressure releases gas. The two most abundant gases are sulfur dioxide and carbon dioxide, and if levels of these gases increase,
Explanation:
What is generally true of atoms with relatively large atomic radii?
Answer:
Large atoms hold their electrons very tightly. ... Large atoms tend to be found on the right side of their period on the periodic table.
Explanation:
Answer:
Explanation:
Large atoms tend to have a low ionization energy and a low electron affinity.
someone plz help me write notes (images attached)
Answer:
kya karna parega hume....???
What mass of calcium chloride is required to prepare 3.20 L of 0.850 M of calcium chloride solution?
Answer:
301.92 g of CaCl2.
Explanation:
The following data were obtained from the question:
Volume of CaCl2 solution = 3.20 L
Molarity of CaCl2 solution = 0.850 M
Mass of CaCl2 =?
Next, we shall determine the number of mole of CaCl2 in the solution. This can be obtained as illustrated below:
Volume of CaCl2 solution = 3.20 L
Molarity of CaCl2 solution = 0.850 M
Mole of CaCl2 =?
Molarity = mole /Volume
0.850 = mole of CaCl2 /3.20
Cross multiply
Mole of CaCl2 = 0.850 × 3.20
Mole of CaCl2 = 2.72 moles
Finally, we shall determine the mass of the CaCl2 needed to prepare the solution as follow:
Mole of CaCl2 = 2.72 moles
Molar mass of CaCl2 = 40 + (2×35.5)
=40 + 71
= 111 g/mol
Mass of CaCl2 =?
Mole = mass /Molar mass
2.72 = mass of CaCl2 /111
Cross multiply
Mass of CaCl2 = 2.72 × 111
Mass of CaCl2 = 301.92 g
Therefore, 301.92 g of CaCl2 is needed to prepare the solution.
The density of a gas is 1.26 g/L at STP. What is the mass of 1 mole? What could this gas be?
Answer: Molar mass=28.224g/mol, The gas could be Nitrogen gas
Explanation:
Density is calculated as Molar mass/ Molar Volume
Recall that
One mole of an ideal gas at (STP) standard temperature and pressure = 22.4 liters (in Volume)
Given That Density =1.26 g/L
Volume = 22.4L at STP,
Molar mass = Density x Molar Volume
= 1.26 g/L x 22.4L =28.224g
Therefore, if 1 mole of this gas has a mass of 28.224g then its molar mass is equal to 28.224g/mol
The molar mass of Nitrogen = 28.014 g/moL, so we can conclude the the gas could be Nitrogen
Which one is true? Elements in the same row have the same number of:
Explanation:
Elements in same row (i.e, from left to right) have the same number of electron shells.
Which pair of elements will form a covalent bond? A. Aluminium and Chlorine B. Carbon and Sulfur C. Lithium and Oxygen D. Potassium and Chlorine
Explanation:
Aluminum and chlorine form covalent bond.
Therefore,
Option A is correct✔
Anything that has mass and takes up space is what
0)
A
tass
B)
volume
)
density
D)
matter
Answer:
D - Matter
Explanation:
Matter is defined as anything that has mass and takes up space. Matter is basically liquid soilds and gasses!
(I hope this helps :>)
How many protons, neutrons, and electrons does 35/17 Cl ^ 1- have?
Answer:
In accordance to the pic
The number of protons in Cl-35 is 17 and the number of neutrons is 18. The number of Cl is 17 whereas the chloride ion Cl⁻ have 18 electrons.
What is chlorine?Chlorine is 17th element in periodic table. Cl is includes in the 17th group of p -block. Cl contains 7 valence electrons and it needs one more electron to attain complete configuration. It is highly electronegative and will easily gain an electron to achieve octet.
Atoms in neutral state have equal number of electrons and protons and this number is equal to the atomic number. The mass number is the sum of number of protins and neutrons.
The atomic number of Cl is 17. Hence the number of protons is 17 and the mass number is 35. So that number of neutrons is 35 - 7 =18. When Cl gains an electron it forms the anion Cl⁻. Hence, the number of electrons in Cl⁻ is 18.
To find more on chlorine, refer here:
https://brainly.com/question/14962130
#SPJ2
A sample of gas in a balloon has an initial temperature of 42 ∘C and a volume of 1.10×103 L . If the temperature changes to 86 ∘C , and there is no change of pressure or amount of gas, what is the new volume, V2, of the gas?
Answer:
1250L or 1.25*10^3
Explanation:
Use the combined gas law, [tex]\frac{P_{1} V_{1}}{T_{1} }[/tex]=[tex]\frac{P_{2}V_{2}}{T_{2} }[/tex]
Put the value for the temperature(in Kelvin) and volume, and you can just put 1 for P1 and P2 because it stays the same.
I'll assume that you meant to put 1.10*10^3L
Molecular orbital diagram for Fe.
ANSWER;
1s22s22p63s23p63d64s2
EXPLANATION;
Molecular orbital diagram for Fe.
In writing the electron configuration for Iron the first two electrons will go in the 1s orbital. Since 1s can only hold two electrons the next 2 electrons for Iron go in the 2s orbital. The next six electrons will go in the 2p orbital. The p orbital can hold up to six electrons. We'll put six in the 2p orbital and then put the next two electrons in the 3s. Since the 3s if now full we'll move to the 3p where we'll place the next six electrons. We now shift to the 4s orbital where we place the remaining two electrons. After the 4s is full we put the remaining six electrons in the 3d orbital and end with 3d6.
Therefore the Iron electron configuration will be 1s22s22p63s23p64s23d6.
Note that when writing the electron configuration for an atom like Fe, the 3d is usually written before the 4s. Both of the configurations have the correct numbers of electrons in each orbital, it is just a matter of how the electronic configuration notation is written
Therefore we have 1s22s22p63s23p63d64s2
When solid S1 is heated, it breaks up into gas G and another solid S2. The solids S1 and S2 and the gas G are all pure substances. On the basis of this information alone, which substance or substances must be compounds? A.S1 only B.S2 only C.S1 and S2 D.S1 and G
Answer:
A.S1 only
Explanation:
A compound is one of the pure substances (other being element) that forms when two or more atoms of an element are chemically combined. According to this question, a solid S1 is heated and it breaks up into gas G and another solid S2 as follows:
S1 (s) ➡ G (g) + S2 (s)
Based on the information in the questio, the solids S1, S2 and the gas G are all pure substances. However, since solid S1 broke down into two other pure substances, it means solid S1 is originally a chemical combination of both products, which denotes a COMPOUND. Note that Gas G and Solid S2 are most likely elements.
How can the rate of a reaction be increased?
(A) decreasing the amount of reactants
(B) having more surface area
(C) diluting a solution
(D) lowering the temperature
Explanation:
Rate of reaction can be increased by having more surface area.
Therefore,
Option B is correct✔
Answer:
b
Explanation: