Answer:
First shell is lower
Explanation:
The electron has to absorb energy to excite and go to higher energy levels/ shells and should release energy to go to lower energy levels/ shells. This means higher the shell , more energy is required and vice versa
Why doesn’t one-electron transfer from a hydrogen atom to another hydrogen atom?
Answer:
The electrons start to repel each other.
Explanation:
Most atoms attain a lower potential energy when they are bonded to other atoms than when they are separated. One is that the single electrons that each hydrogen atom possesses begin to repel each other. This repulsive force would tend to make the potential energy of the system increase.
Why was einstein not happy with the probable positions of electrons in the orbitals?
Since electron orbitals are described as probability clouds, Einstein disagreement with the probable positions of electrons in the orbitals is that, It is not possible to know the orbit of an electron when the position is under probability.
According to Bohr's theory, it is difficult to locate electron or cannot be located in a definite region. Electron has to be found in an orbit and nowhere else. When the probability of finding an electron in a given spherical shell around the nucleus is plotted the distance of the electron from the nucleus for the hydrogen atom, the graph indicates that the probability of finding the electron increases as the distance between the electron and the nucleus decreases
Bohr claimed that electrons a entities had only probabilities if they weren't observed. While Einstein argued that they had independent reality.
But in wave mechanics Model, there is a slight chance of knowing the location of the electron.
Heisenberg uncertainty principle also claim the possibility of knowing the position of electron. Albert Einstein also claim that; to determine the position of an electron to an accurate extent, you would have to compromise your ability to know it's momentum. This inaccuracy will eventually affect the measurement of momentum which will be extremely uncertain.
Since electron orbitals are described as probability clouds, Einstein disagreement with the probable positions of electrons in the orbitals is that, It is not possible to know the orbit of an electron when the position is under probability.
Learn more here: https://brainly.com/question/2663406
The body also loses heat by the evaporation of sweat. How is a tea kettle boiling similar to the evaporation of sweat from the body?
Answer:
Our body loses heat by the evaporation of sweat, which is like a tea kettle boiling on a stove top. Both are being heated through conduction, the tea kettle from the stove top and the sweat from our body.
Explanation:
Hope this helps!
what is the coefficient for 4K2CO3
Filling Air Bags Automobile air bags produce nitrogen gas from the reaction:
a. If 2.25 g of NaN3 reacts to fill an air bag, how much P–V work will the N2 do against an external pressure of 1.00 atm given that the density of nitrogen is 1.165 g/L at 20°C?
b. If the process releases 2.34 kJ of heat, what is ∆E for the system?
(a) The work done by the nitrogen against external pressure is 126.66 J.
(b) The change in the internal energy of the system is -2,466.66 J.
The given parameters:
Mass of the compound, = 2.25 gExternal pressure, P = 1.0 atm = 101325 PaDensity of Nitrogen gas, ρ = 1.165 g/LTemperature of the Nitrogen gas, T = 20⁰CThe molar mass of the given compound is calculated as follows;
NaN₃ = 23+ (14 x 3) = 65 g/mol
65 g -------------- 42
2.25 g ------------- ?
[tex]= \frac{2.25 \times 42}{65} \\\\= 1.45 \ g[/tex]
The volume of the nitrogen gas is calculated as follows;
[tex]\rho = \frac{m}{V} \\\\V = \frac{m}{\rho} \\\\V = \frac{1.45}{1.165} \\\\V = 1.25 \ L[/tex]
[tex]V = 0.00125 \ m^3[/tex]
The work done by the nitrogen against external pressure is calculated as follows;
[tex]W = PV\\\\W = 101325 \times 0.00125\\\\W = 126.66 \ J[/tex]
The change in the internal energy of the system is calculated by applying first law of thermodynamics as follows;
[tex]\Delta E = Q - W\\\\\Delta E = (-2,340) - (126.66)\\\\\Delta E = -2,466.66 \ J[/tex]
Learn more about first law of thermodynamics here: https://brainly.com/question/2965070
Which of the following are required for plants to carry out photosynthesis?
Group of answer choices
soil
water
carbon dioxide
oxygen
sunlight
Answer:
Carbon dioxide, water, and sunlight
Explanation:
Explain what is wrong with this electron dot diagram for the element nitrogen
I'm melting point of a substance is the blank which it melts
Answer:
hope its help
Explanation:
melting point (or, rarely, liquefaction point) of a substance is the temperature at which it changes state from solid to liquid. At the melting point the solid and liquid phase exist in equilibrium. The melting point of a substance depends on pressure and is usually specified at a standard pressure such as 1
Answer:
I hope you have your correct answer
which of the following statements about this reaction is true:
CH4+2O2-->CO2+2H2O+Heat
A. The reaction releases heat.
B. heat is absorbed by the reaction.
C. the reaction consumes water.
D.The reaction releases oxygen.
Explanation:?
[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪ {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]
The Correct statement is ~
A. The reaction releases heatAs we can observe, there's heat in product side of the given equation that shows - In the given reaction heat is released making it an exothermic reaction ~
I hope it helps ¡
[tex]\mathrm{✌TeeNForeveR✌}[/tex]
please help me with the attachment down bellow its about metal nonmetal and metalloids
Answer:-
a. Non metals
b. Metals
c. Metals
d. Nonmetal
e. Metalloid
f. Metalloid
g. Metal
h. Nonmetal
i. Metal
j. Metal
k. Nonmetal
l. Nonmetal
Hope this helps you!
What is a element
2. compound
3.molecules
Answer:
what is Element: each of more than one hundred substances that cannot be chemically interconverted or broken down into simpler substances and are primary constituents of matter. Each element is distinguished by its atomic number, i.e. the number of protons in the nuclei of its atoms.
Explanation:
2. compound:a thing that is composed of two or more separate elements; a mixture.
3. Molecules: A molecule is an electrically neutral group of two or more atoms held together by chemical bonds. Molecules are distinguished from ions by their lack of electrical charge
What is an example of a polar molecule
Question 8 options:
A molecule that is made of ionic bonds like NaCl.
A molecule that is made of covalent bonds like sugar.
A molecule made of covalent bonds that has partial positive and partial negative charges in different areas of the atom.
A molecule made of ionic bonds that has strong positive and strong negative charges in different areas of the molecule.
Answer:
The two main classes of molecules are polar molecules and nonpolar molecules. Some molecules are clearly polar or nonpolar, while others fall somewhere on the spectrum between two classes. Here's a look at what polar and nonpolar mean, how to predict whether a molecule will be one or the other, and examples of representative compounds.
Explanation:
so its c
An example of polar molecule is a molecule made of covalent bonds that has partial positive and partial negative charges in different areas of the atom.
What is covalent bond?
Covalent bond is defined as a type of bond which is formed by the mutual sharing of electrons to form electron pairs between the two atoms.These electron pairs are called as bonding pairs or shared pair of electrons.
Due to the sharing of valence electrons , the atoms are able to achieve a stable electronic configuration . Covalent bonding involves many types of interactions like σ bonding,π bonding ,metal-to-metal bonding ,etc.
Sigma bonds are the strongest covalent bonds while the pi bonds are weaker covalent bonds .Covalent bonds are affected by electronegativities of the atoms present in the molecules.Compounds having covalent bonds have lower melting points as compared to those with ionic bonds.
Learn more about covalent bond,here:
https://brainly.com/question/19382448
#SPJ2
Q. What phase change occurs at letter A?
Answer:
Where is the picture? Can't answer without it.
Which event is an example of an exothermic reaction? (1 point)
o evaporation
o melting ice
O combustion
o decomposition
Answer:
An exothermic reaction is defined as a reaction that releases heat and has a net negative standard enthalpy change. Examples include any combustion process, rusting of iron, and freezing of water.
Explanation:
An exothermic reaction is defined as a reaction that releases heat and has a net negative standard enthalpy change. Examples include any combustion process, rusting of iron, and freezing of water.
The combustion is an example of an exothermic reaction.
An exothermic reaction is a reaction that releases energy, this energy is usually in the form of heat. An endothermic reaction is a reaction that absorbs energy to take place.
Analyzing the given reactions we have that:
Evaporation: need to absorb energy to increase the kinetic energy of the moleculesMelting ice: need to absorb energy to increase the kinetic energy of the moleculesCombustion: releases energy after forming bonds between moleculesDecomposition: need to absorb energy to break moleculeSo, the combustion is an example of an exothermic reaction.
Learn more about exothermic reaction in: brainly.com/question/14969584
Part 1. After learning about the different parts and functions of a meroscope you will now reflect on the importance of ench part citeit significance of each parts by naming it and answering the guide question
Explanation:
after learning more about the position and would
Li+1 is an ion of Lithium with an overall +1 charge. It has 3 protons. How many electrons does it have?
Answer:
2 electrons.
Explanation:
Which of the following describes how photochemical smog is bad for the environment?
1. Decreases crop yields
II. Interferes with amount of sunlight reaching plants
III. Mixes with moisture and becomes acidic
OI and 11
Oll and III
O I and III
O I, II, and III
Answer:
Its l and ll
Explanation:
it doesn't mix with moisture that would be sulfurous smog
Answer: 1 and 3
qwq rawr
Which of the following the parts of the cell is made up of lipoprotein? A)ribosomes B)plasma memeberanes C)cell wall D)DNA
Answer: the answer is plasma membrane
Explanation:
Plasma membrane is made up of lipoproteins. There are two layers of lipids and the protein molecules are embedded in it. It is present in both plant cell and animal cell. The membrane is selectively permeable i.e., it allows only certain substances to pass.
The parts of the cell is made up of lipoprotein is Plasma Membrane. So, the correct option is (B).
What is Plasma Membrane?The plasma membrane is made up of lipoproteins. There are two layers of lipids and protein molecules are embedded in it. It is present in both plant cell and animal cell. The membrane is selectively permeable i.e. it allows only certain substances to pass through.
The plasma membrane is also called the cell membrane which is a biological membrane that separates and protects the interior of all cells from the external environment. The plasma membrane controls the transport of materials entering and exiting the cell.
It provides a definite environment inside the cell. It also has many different functions such as transporting nutrients into the cell and removing toxins from the cell. The second is that the membrane of the cell, which would be the plasma membrane, would contain proteins that interact with other cells.
Thus, the parts of the cell is made up of lipoprotein is Plasma Membrane. So, the correct option is (B).
Learn more about Plasma Membrane, here:
https://brainly.com/question/14727404
#SPJ2
Methods used to separate heterogeneous mixtures include the following: check all that apply. *
Decanting
Filtration
Sifting
Answer:
Filtration, Sifting and Decanting
Explanation:
Heterogenous mixtures can be seperated by filtration and sifting (Also known as sieving). Sifting is the process of parting a mixture using a sieve. Sifting is used to separate solid mixtures that contain molecules of varying sizes. Filtration is the process of separating a liquid from an insoluble solid. A common example is using a funnel and a coffee filiter to seperate the liquide from the insoluable solid. Although there are many other methods for filtration. You can also separate mixtures by decantation. Decantation is the process of separating a liquid from a solid/liquid by removing the liquid layer at the top from the layer of solid/liquid below.
A car starts from rest and accelerates at 2.5m/s^2 for 2s. What is the final velocity of the car
[tex]\begin{gathered}\boxed{\begin{array}{c}\\ {\pmb{\sf{Three \: equation \: of \: motion}}} \\ \\ \sf \star \: v \: = u \: + at \\ \\ \sf \star \: s \: = ut + \: \dfrac{1}{2} \: at^2 \\ \\ \sf \star \: v^2 - u^2 \: = 2as\end{array}}\end{gathered}[/tex]
Calculation :-[tex]\pink{\qquad \pmb{ \sf\longrightarrow v \: = u \: + at}}[/tex]
[tex] \qquad \pmb{\sf \longrightarrow v = 0 + 2.5 \times 2}[/tex]
[tex]\qquad \pmb{ \sf\longrightarrow v = 0 + 5}[/tex]
[tex] \qquad \pmb{\sf \longrightarrow v = 5 \: ms^{-1}}[/tex]
[tex]\qquad \longrightarrow {\pink{\underline{\underline{\pmb{\sf{ Final \: velocity= 5 \: ms^{-1} }}}}}}[/tex]
Henceforth –
The final velocity of the car is 5 m/s▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
C2H4NH Lewis structure
During secondary active transport, the movement of one substance down its electrochemical gradient provides the force to move another substance up its electrochemical gradient. When both substances move in the same direction the mechanism is referred to as a(n)
Given what we know about the mechanisms surrounding the biological movement of substances, we can confirm that when two substances in a secondary active transport move in the same direction, it is called a symport.
A secondary active transport harnesses the electrochemical energy generated by its movement of one substance, to aid the movement of the other. These movements can be of two types, depending on the directions:
AntiportSymportAn antiport transport will move both substances in opposite directions, meaning one out of the cell and one into the cell. The transport described in the question is that of a symport, given that it moves both substances in the same direction.
To learn more visit:
https://brainly.com/question/2503897?referrer=searchResults
help asap for brainlist
The atoms of platinum and silver are identical (true or false)
Answer:
I think it's false but not sure
The atoms of platinum and silver are identical. This statement is false.
What is platinum ?Platinum is a chemical element which is represented by the symbol Pt. Its atomic number is 78. It is a dense, malleable, ductile, highly unreactive, precious, silverish-white transition metal.
The elements silver and platinum have the same properties in terms of ductility, malleability, and conductivity of heat and electricity.Platinum is more ductile than gold, silver or copper.
Both metals silver and platinum appear silver. They have gray undertones, unlike white gold which has a warmer, yellow undertone, instead platinum is much brighter and shinier and silver is a duller, gray appearance.
Thus, The atoms of platinum and silver are identical. This statement is false.
To learn more about the platinum, follow the link;
https://brainly.com/question/25828517
#SPJ2
According to Newton's law of universal gravitation, how are mass and
gravitational force related?
A. Mass and gravitational force are the same.
B. An increase in mass is a decrease in force.
C. An increase in mass is an increase in force.
O D. Mass and gravitational force are not related.
Explanation:
Since the gravitational force is directly proportional to the mass of both interacting objects, more massive objects will attract each other with a greater gravitational force. So as the mass of either object increases, the force of gravitational attraction between them also increases.
Chemistry help!!
A student conducts an experiment to separate water into hydrogen and oxygen as shown below.
As a result the student collects 28.0 g of hydrogen and 224.0 g of oxygen. How many grams water did the student originally have involved in the experiment
The student originally has 252 grams of water in this experiment.
LAW OF CONSERVATION OF MASS:
The law of conservation of mass explains that matter (mass) can neither be created nor destroyed but can be changed from one form to another. This means that in a chemical reaction, the sum of the masses of the reactants must equate to the total mass of product(s). According to this question, a student conducts an experiment to separate water into hydrogen and oxygen. The student collects 28.0 g of hydrogen and 224.0 g of oxygen. Since hydrogen and oxygen are the constituent elements of water, the sum of their masses must equate the mass of water. Therefore, 224g of oxygen + 28g of hydrogen = 252g of water.Learn more at: https://brainly.com/question/24996173?referrer=searchResults
For a constant force, when the surface area is tripled the
.
— Pressure =
force
surface area
pressure is
(a) doubled.
(b) a third as much.
(c) tripled.
(d) unchanged.
I think it is c
because it say tripled
PLS HELP: Endocrine Organs Crossword
PLEASE HELP
What is the chemical equation for cellular respiration?
What role does photosynthesis play in our environment?
Answer:
Cellular Respiration:
C6H12O6 + 6O2 → 6CO2 + 6H20 + energy (Glucose + Oxygen yields Carbon Dioxide + Water + Energy)
Photosynthesis is important to living organisms because it is the number one source of oxygen in the atmosphere. Without photosynthesis, the carbon cycle wouldn't occur/exist, oxygen-requiring life would not survive and plants would die. Without photosynthesis there would be little to no oxygen on the planet and Earth would be impossible to live on.
A bar of copper (Copper = 0.385 J/g.°C) and a bar of aluminum (Aluminum = 0.897 J/g.°C) have the same mass. Which requires more energy to increase the temperature from 20°C to 30 °C?
Answer:
Aluminum
Explanation: