Answer: It is important to use both QUALITATIVE and QUANTITATIVE data because the limitations of one type of data are counteracted by the advantages of the other.
Explanation:
QUALITATIVE data defined as type of data that centers on the measurement of the features of the subject under study. This is obtained through careful observations. It is a non numerical type of data. Some examples includes: sex(male or female), name, and colours. The limitations of using only qualitative data for a research includes:
--> it can not be statistically represented
--> the results can not be verified
--> it is time consuming and
--. It requires alot of labor.
QUANTITATIVE data is defined as the type of data that centers on the measurement of the amount and quantity of the subject under study. It can be used to conduct a large study than qualitative data. Examples include the heights and weights of students. The limitations of quantitative research includes:
--> poor representation of target population
--> inability to control the environment and
--> lack of resources for data collection.
Therefore, It is important to use both QUALITATIVE and QUANTITATIVE data analysis because the limitations of one type of data are counteracted by the advantages of the other. I hope this helps, thanks!
Answer:
Using a combination of qualitative and quantitative data can improve an evaluation by ensuring that the limitations of one type of data are balanced by the strengths of another. This will ensure that understanding is improved by integrating different ways of knowing.
Explanation:
Which natural science studies motion and forces?
a.
Mathematics
b.
Biology
c.
Chemistry
d.
Physics
Answer:
Physics
Explanation:
:):):)
what is static electricity? explain how electrons are involved
please answer asap
Answer:
Electricity produced via friction is a development of electric charges on articles. Energizes construct when negative electrons are moved starting with one article then onto the next. The article that surrenders electrons turns out to be decidedly charged, and the item that acknowledges the electrons turns out to be contrarily charged. This can occur in a few different ways.
Explanation:
[tex]\mathrm {All, done!}[/tex]
brainlists please help
on the coner opposite of 8n is 5n
Answer:
resultant force=16N→(TOWARDS THE DIRECTION OF 8N)
Explanation:
resultant force=8N+13N-5N
=16N→(TOWARDS THE DIRECTION OF 8N)
PLEASE HELP!!!!!!
A box is dragged across a floor. The box accelerates at 0.09 m/s² and is pulled by a 75 N force. What is the mass of the box?
833 kg
12 g
833 g
6.75 kg
Answer:833
Explanation:
PLEASE HELP ASAP WILL GIVE BRAINLIEST!!!!
compare and contrast the strength of the forces between two objects with a mass of 1 kg each, a charge of 1 C, and at a distance of 1 m from each other.
Explanation:
Please mark me as the brainliest answer
Answer:
The electrostatic force is larger by a factor of 8.988E9 / 6.674E-11 = 1.35E20
Explanation:
William gave you all the ingredients, but not the answer. Being both 1/r^2 forces (resulting from massless mediators in QFT), and with unit charges in the problem (1 coulomb, 1 Kg), separated by unit distance (1m), the only nontrivial numerical values in the problem are the constants of proportionality: Coulomb's constant (k) and Newton's gravitational constant (G). So to "compare and constrast": the ratio of the forces is simply the ratio of these constants. The electromagnatic force is 1.35 X 10^20 times stronger than the gravitational force. Assuming positive charge on both objects (the problem is ambiguous on this), they are repelled, whereas the much weaker gravitational force is attractive. (Gravity only has one kind of "charge" - it's unsigned - and the force is always attractive).
The problem doesn't say the objects are pointlike: if they have some extent and are either conductive or made of some dielectric, then things get messy because the charge distribution on the object won't be uniform then, but save that for grad school. :-)
5. One of the attractions at Typhoon Lagoon, a water park in Florida, is a surf
pool. 303,200.0 liters of water are used for each wave in the surf pool and
waves are generated every 90 seconds. How many gallons of water are used
every 30 minutes in the surf pool.?
Answer:
1595790 gallons
Explanation:
Given that;
3.8 L = 1 US gallon
303,200.0 liters = 303,200.0 * 1/ 3.8 = 79789.5 gallons
If a wave is made every 90 seconds which is 1.5 mins
Then;
Number of waves made in 30 minutes = 30/1.5 = 20 waves
if each uses 79789.5 gallons, then 20 waves will use 20 * 79789.5 gallons = 1595790 gallons
Your car is initially at rest when you hit that gas and the car begins to accelerate. The forward force of the car is 5630 N while the resisting force total 330 N. The car has a mass of 1313 kg and the acceleration lasts for 2.6s. What is the final speed of the car and how much ground does it cover during this acceleration?
HELPP
Viewed from Earth, it seems as if the Sun moves across the sky each day. This is because:
A. the sun isn't moving; observations made from Earth are rotating with the Earth
B. the Earth goes around the Sun over the course of a year
C. the Sun revolves around the Earth
D. the Earth isn't moving
What is one of the principles of charges in a conductor?
Answer:
A conductor allows free charges to move about within it. The electrical forces around a conductor will cause free charges to move around inside the conductor until static equilibrium is reached. Any excess charge will collect along the surface of a conductor. Conductors with sharp corners or points will collect more charge at those points.
Explanation:
smallest planet in our solar system
Answer: pluto
Explanation:
pluto is the smallest
observe the figure given carefully volume of water in each vessel is shown arrange them in order of decreasing pressure at the base of each vessel explain the reason
Answer:
See the explanation below
Explanation:
The pressure is defined as the product of the density of the liquid by the gravitational acceleration by the height, and can be easily calculated by means of the following equation.
[tex]P=Ro*g*h[/tex]
where:
Ro = density of the fluid [kg/m³]
g = gravity acceleration = 9.81 [m/s²]
h = elevation [m]
In this way we can understand that the greater pressure is achieved by means of the height of the liquid, that is, as long as the fluid has more height, greater pressure will be achieved at the bottom.
Therefore in order of decreasing will be
The largest pressure with the largest height of liquid, container B. The next is obtained with container D, the next with container A and the lowest pressure with container C.
The pressure decreases as we go from the container B - D - A - C
A soccer ball takes 30 seconds to roll 15 meters. calculate the average speed ot the ball using distance and tome measurements?
Answer:
average speed = 0.5 m/s
Explanation:
average speed = (distance) / (elapsed time)
Given time elapsed = 30 seconds and distance = 15 meters
average speed = 15 meters / 30 seconds = 0.5 meters/second = 0.5 m/s
IF YOU PLAY METAL GEAR RISING COMMENT ON THIS QUESTION
Answer:
Hey baby, I love you. Yes i do play metal gear with snake
Explanation:
Answer:
Yes me too. I have played.
Explanation:
please help me, i beg you.
Which Statement best describes the inner core of the earth?
a
A metallic liquid substance
b
A very cold substance
c
A spherical solid metal made up of Nickel, Iron and small amount of sulfur, silicon and oxygen.
d
A flatten but thick structure similar to a granite counter top
Answer:
c
Explanation:
A spherical solid metal made up of Nickel, Iron and small amount of sulfur, silicon and oxygen.
you are welcome
Chuck Is driving from Chicago to Miami, in one hour he drives 120 km. What is Chuck’s average velocity?
Answer:
Chuck's average speed is 60.
A mineral:__________
a) must have an identifiable chemical composition.
b) This includes solids with a compositions that can be identified but not expressed by an exact chemical formula; an example is glass must be inorganic.
c) This excludes the vast number of organic compounds produced by living matter. must be naturally formed or formed from naturally occuring compounds.
d) This includes the vast numbers of substances that can be produced in a laboratory but are not found in nature. must be a solid or a liquid.
e) This excludes all gases.
Answer:
The correct options are A, B, C and E
Explanation:
The above speaks to the characteristics of Minerals.
Option D is excluded because minerals cannot be liquid or gaseous. Even if it is possible, those replicated in the laboratory are not considered as minerals neither are minerals liquid. They must be solid. The molecules for most minerals are very tightly or densely arranged because of the nature of their formation. Most of them are formed under consistent and intense pressure.
Cheers!
By using electroscope, if the body is negatively charged then due to electrostatic induction, then on the leaves there will be appear:
(a) both positive and negative charges
(b) negative charge
(c) positive charge
(d) no charge
(b) negative charge
This is the answer
Una curva de radio R = 75 [m] tiene un peralte hecho de tal forma que un auto andando a v1 = 35 [m/s] no derrape incluso con el piso congelado (sin roce). ¿Cuál es el coeficiente de roce estático mínimo necesario entre las ruedas y el pavimento para que, en un día seco y soleado, el auto no derrape cuando avanza a v2 = 118 [m/s]?
Answer:
053.
Explanation:
Given that the radius of curvature of the path, R = 75 m.
Speed of the car on that path , [tex]v_1 = 35 m/s[/tex]
The centripetal force,[tex]F_c[/tex] acting on the body having mass, m, when it moves with the velocity v on curved path having radiusR
Ris[tex]F_c = mv^2/R[/tex]
Gravitational force, [tex]F_g[/tex] = mg.
Let tha angle of superelevation is [tex]\theta.[/tex]
As the car does not skid even with zero friction, so
[tex]mg\sin\theta = (mv_1^2)/2 \cos\theta[/tex]
[tex]\Rightarrow \tan\theta = v_1^2/2g=\cdots(i)[/tex]
On sunny day, let the minimun static friction coefficient between the wheels and the pavement is [tex]\mu.[/tex]
As [tex]v_2[/tex] = 118 m/s is greater than v_so the car tends to skid in upper direction and the frictional
force,f, will acts is downward direction.
As there is no skidding, so
[tex]f+ mg\sin\theta= (m(v_2)^2)/R\cos\theta[/tex]
[tex]\Rightarrow f=(m(v_2)^2)/R\cos\theta - mg\sin\theta[/tex]
where [tex]f= \mu N.[/tex]
[tex]So, \mu = \frac {(m(v_2)^2)/R\cos\theta - mg\sin\theta}{N} \cdots(ii)[/tex]
Where N is the normal reaction can be determined by balancing the force in perpendicular direction of the plane.
[tex]N= mg\cos\theta+\frac {m(v_2)^2}{R}\sin\theta[/tex]
From equation (ii)
[tex]\mu = \frac {(m(v_2)^2)/R\cos\theta - mg\sin\theta}{mg\cos\theta+\frac {m(v_2)^2}{R}\sin\theta}[/tex]
[tex]=\frac{-g\tan\theta+v^2/R}{v_2^2\tan\theta+g}[/tex]
[tex]= \frac {(m(v_2)^2)/R\cos\theta - mg\sin\theta}{mg\cos\theta+\frac {m(v_2)^2}{R}\sin\theta}[/tex]
[tex]=\frac{-g(v_1^2/2g)+v^2/R}{v_2^2(v_1^2/2g)+g}[/tex]
[tex]= \frac{v_2^2/R-v_1^2/R}{g+v_2^2/R\times v_1^2/Rg}[/tex]
[tex]=\frac{118^2/75-35^2/75}{9.81+118^2/75\times 35^2/(75\times 9.81)}[/tex]
=0.53
Hence, the minimum coefficient of friction is 0.53.
A slab of glass 8.0 cm thick is placed upon a printed page. If the refractive index of the glass is 1.5, how far from the surface would the letters appear to be when viewed from directly above?
Answer:
5.3 cm
Explanation:
This question is an illustration of real and apparent distance.
From the question, we have the following given parameters
Real Distance, R = 8.0cm
Refractive Index, μ = 1.5
Required
Determine the apparent distance (A)
The relationship between R, A and μ is:
μ = R/A
i.e.
Refractive Index = Real Distance ÷ Apparent Distance
Substitute values in the above formula
1.5 = 8/A
Multiply both sides by A
1.5 * A = A * 8/A
1.5A = 8
Divide both side by 1.5
1.5A/1.5 = 8/1.5
A = 8/1.5
A = 5.3cm
Hence, the letters would appear at a distance of 5.3cm
Use the diagram to answer the questions below.
1. What is the relationship between seasons in the northern hemisphere and southern hemisphere? Explain.
2. Identify the seasons that are represented in the northern hemisphere and in the southern hemisphere. Explain.
Answer:
1. because of the tilted axis of earth the seasons in northern hemisphere are the exact opposite of the southern. because the sunrays reaches the earth an different points and when the earth moves around the sun it changes the hemisphere which is tilted to the sun.
2. the northern hemisphere is in Winter and the southern in summer. because the southern is tilted to the sun and the northern not so less sunrays reaches the northern hemisphere.
I'm sorry my explanation are bad
Willing to give brainliest!
A motorbike accelerates from 12 m s-¹ to 36 m s-¹ 3 seconds.
Calculate the acceleration of the motorbike.
Answer:
acceleration is 8 m/s²
Explanation:
a = 36 - 12 / 3
a = 24 / 3
a = 8
hope this helps :)
Answer:
1
Explanation:
1
During combustion reactions, explain why the energy of the reactants must exceed the total energy of the products
Answer:
In these reactions the products are higher in energy than the reactants. ... This barrier is due to the fact that to make CO2 and H2O we have to break 4 carbon-hydrogen bonds and some ...
Explanation:
What happens along a divergent boundary?
Answer:
Two tectonic plates move away from each other
Explanation:
I just did this on AP3X. If this is not what your lookinf for then so sorry
Current 1 of 8.4 A runs for 240 seconds and then stops. Current 2 is 10.5 A. How long does current 2 have to run to deliver the same amount of charge as current 1?
This question involves the concepts of current and charge.
Current 2 has to run for "192 s" to deliver the same amount of charge as current 1.
CurrentThe current is defined as the amount of charge passing per unit time. Mathematically,
[tex]I=\frac{q}{t}\\\\q = It[/tex]
Since, the charge for both the currents is same:
q₁ = q₂
I₁t₁ = I₂t₂
[tex]t_2=\frac{I_1t_1}{I_2}[/tex]
where,
I₁ = current 1 = 8.4 A
I₂ = current 2 = 10.5 A
t₁ = time for current 1 = 240 s
t₂ = time for current 2 = ?
Therefore,
[tex]t_2=\frac{(8.4\ A)(240\ s)}{10.5\ A}[/tex]
t₂ = 192 s
Learn more about charges here:
https://brainly.com/question/19886264
#SPJ2
help me pleaseeeee
Answer:
Explanation:
Frequency, in physics, the number of waves that pass a fixed point in unit time; also, the number of cycles or vibrations undergone during one unit of time by a body in periodic motion...............
The Total Kinetic Energy of moving particles of matter is called ______ energy?
Answer: thermal energy
Explanation: hope this helps
answer all please!!!!!!!!!!✌
Answer:
koj ruam zog
Explanation:
Answer:
the answer of 7th question
Make sure your dishwasher is full before you use it – running a half-empty dishwasher wastes large amounts of energy
Try to use a cooler temperature
Consider drying your clothes outside if it’s warm instead of using the dryer
Turn off the fan when you leave a room
Close your drapes or drop your window shades during the day.
Wash your clothes in cold water.
Wrap or cover foods and drinks in the refrigerator.
Always use the cold water faucet, unless you really want hot water.
the answer of 10th question
Static electricity is used in pollution control by applying a static charge to dirt particles in the air and then collecting those charged particles on a plate or collector of the opposite electrical charge. These devices are commonly known as “electrostatic precipitators.
To illustrate the use of a multistage rocket consider the following:
(a) A certain rocket carries 60% of its initial mass as fuel. (That is, the mass of fuel is 0.6mo) What is the rocket's final speed, accelerating from rest in free space, if it burns all its fuel in a single stage? Express your answer as a multiple of v ex .
(b) Suppose instead it burns the fuel in two stages as follows: In the first stage it burns a mass 0.3m o of fuel. It then jettisons the first-stage fuel tank, which has a mass of 0.1m o , and thenburns the remaining 0.3m 0 of fuel. Find the final speed in this case, assuming the same value of vex throughout and compare.
Answer:
a
[tex]v_f = 0.916 v_{ex}[/tex]
b
[tex]v_f = 1.05 v_{ex}[/tex]
Explanation:
Considering question a
From the question we are told that
The mass of the rocket is [tex]m_o[/tex]
The mass of the fuel which is in the rocket is m = 0.6 M
Generally given that the rocket burns all it fuel in a single stage , the final velocity of the rocket is mathematically represented as
[tex]v_f = v_{ex} ln [\frac{m_o}{m_k} ][/tex]
Here [tex]m_k[/tex] is the mass of the rocket without fuel which is mathematically evaluated as
[tex]m_k = m_o- m[/tex]
=> [tex]m_k = m_o -0.6m_o[/tex]
=> [tex]m_k = [1- 0.6] m_o[/tex]
=> [tex]v_f = v_{ex} ln [\frac{m_o}{[1 - 0.6]m_o} ][/tex]
=> [tex]v_f = 0.916 v_{ex}[/tex]
Considering question b
From the question we are told that
The mass of the fuel it burn at the first stage is [tex]m = 0.3 m_o[/tex]
The mass of the first stage fuel tank [tex]m_1 = 0.1 m_o[/tex]
The mass of the fuel at the second stage is [tex]m_f = 0.3m_o[/tex]
Generally the velocity of the rocket at the first stage is mathematically represented as
[tex]v_i = v_{ex} * ln [ \frac{m_o }{[1- m]m_o } ][/tex]
=> [tex]v_i = v_{ex} * ln [ \frac{m_o }{[1- 0.3]m_o } ][/tex]
=> [tex]v_i = v_{ex} * ln [ \frac{1 }{0.7 } ][/tex]
=> [tex]v_i =0.357 v_{ex}[/tex]
Generally the mass of the rocket after first stage is
[tex]m_r = m_o - 0.3m_o -0.1m_o[/tex]
=> [tex]m_r = 0.6m_o[/tex]
Generally the final velocity of the rocket at the second stage is
[tex]v_f = v_i + v_{ex} * ln [\frac{m_r}{ m_f } ][/tex]
=> [tex]v_f = v_i + v_{ex} * ln [\frac{0.6 m_o }{0.3mo } ][/tex]
=> [tex]v_f = 0.357 v_{ex} + 0.693 v_{ex}[/tex]
=> [tex]v_f = 1.05 v_{ex}[/tex]
Which statement describes the interaction between the permanent magnets and the electromagnet in an electric motor? A. The current in the electromagnet is reversed by the permanent magnets B. The current in the permanent magnets is reversed by the electromagnet C. The poles of the permanent magnets are reversed by the electric field of the electromagnet. D. The metal loop in the electromagnet turns because of the magnetic field of the permanent magnets
Answer:D
Explanation:AP3X
The statement describes the interaction between the permanent magnets and the electromagnet in an electric motor is option D.
What is magnet?A substance which is negative charged at one end and positive charged at another end creating the magnetic field around it.
A bar is a magnet which can attract the particle which are charged. It has two poles North and South.
The permanent magnet create magnetic field very strong. The electromagnet is find in the electric motor. In the motor, loop made up of conductor is rotated by the effect of magnetic field of permanent magnet.
Thus, the correct option is D.
Learn more about magnet.
https://brainly.com/question/2841288
#SPJ2
observe the figure given carefully volume of water in each vessel is shown arrange them in order of decreasing pressure at the base of each vessel explain the reason
Answer:
See the explanation below
Explanation:
The pressure is defined as the product of the density of the liquid by the gravitational acceleration by the height, and can be easily calculated by means of the following equation.
[tex]P=Ro*g*h[/tex]
where:
Ro = density of the fluid [kg/m³]
g = gravity acceleration = 9.81 [m/s²]
h = elevation [m]
In this way we can understand that the greater pressure is achieved by means of the height of the liquid, that is, as long as the fluid has more height, greater pressure will be achieved at the bottom.
Therefore in order of decreasing will be
The largest pressure with the largest height of the liquid, container B. The next is obtained with container D, the next with container A and the lowest pressure with container C.
The pressure decreases as we go from the container B - D - A - C