Can magic 8 ball wash with water?

Answer:

B) a predator

Answer:

The new volume is 1.993 L

Explanation:

The gas laws are a set of chemical and physical laws that allow determining the behavior of gases in a closed system. The parameters evaluated in these laws are pressure, volume, temperature and moles.

Boyle's law says that the volume occupied by a certain gaseous mass at constant temperature is inversely proportional to the pressure. This law is expressed mathematically as:

P*V=k

Gay-Lussac's law indicates that, as long as the volume of the container containing the gas is constant, as the temperature increases, the gas molecules move faster. Then the number of collisions with the walls increases, that is, the pressure increases. That is, the pressure of the gas is directly proportional to its temperature. This law indicates mathematically that the quotient between pressure and temperature is constant:

[tex]\frac{P}{T}=k[/tex]

Finally, Charles's law indicates that as the temperature increases, the volume of the gas increases and as the temperature decreases, the volume of the gas decreases. In summary, Charles's law is a law that says that when the amount of gas and pressure are kept constant, the quotient that exists between the volume and the temperature will always have the same value:

[tex]\frac{V}{T}=k[/tex]

Combined law equation is the combination of three gas laws called Boyle's, Charlie's and Gay-Lusac's law:

[tex]\frac{P*V}{T}=k[/tex]

Analyzing an initial state 1 and a final state 2, it is satisfied:

[tex]\frac{P1*V1}{T1}=\frac{P2*V2}{T2}[/tex]

In this case:

Replacing:

[tex]\frac{500 kPa*3 L}{323 K}=\frac{240 kPa*V2}{103 K}[/tex]

Solving:

[tex]V2=\frac{103 K}{240 kPa} *\frac{500 kPa*3 L}{323 K}[/tex]

V2=1.993 L

The new volume is 1.993 L

Answer:

m= 0.20 Kg

Explanation:

Given: F = 6 J, a = 3 m

To find: What is  the mass of the apple?

Formula: [tex]m=\frac{2KE}{v^2}[/tex]

Solution: Newtons are derived units, equal to 1 kg-m/s². In other words, a single Newton is equal to the force needed to accelerate one kilogram one meter per second squared.

M = F ÷ a

F = 6 kg ÷ 3 m/s2

F = 2 N

PE = mgh 6 J= (3m) (9.8 m/s2²) (__m) m= 0.20 Kg

Answer:red, orange, yellow, green, blue, indigo and violet.

Explanation:

Answer:

Subscript, or B

Explanation:

AgS is the equation for the chemic reaction of Silver + Sulfur, since the subscript of 2 goes by the g in the equation, this would equal subscript.

Remember subscripts are located at the BOTTOM of a coefficient and superscripts are located at the TOP of a coefficient.

Hope this supported your learning journey through and through! Don't forget to drop me a Brainliest! (No pressure, only if you want to!) (◠△◠✿) Sincerely, Kelsey from Brainly.

~ #LearnWithBrainly ~

Answer:

2H₂S + 1O₂ → 2H₂O + 2S

Explanation:

SOLUTION :-

Balance it by using 'hit & trial' method , and you'll get the answer :-

2H₂S + 1O₂ → 2H₂O + 2S

VERIFICATION :-

In reactant side of equation :-

In product side of equation :-

Number of atoms of each element is equal in both reactant & product side of equation. Hence , the equation is balanced.

Answer:

19.3

Explanation:

V=4^3 a^3,  to find volume with sides

p= 1235/64, Mass/ Volume= Density

Answer:

Density= 3.68g/cm³

The object will sink in water

Explanation:

D=m/v

=350/95

=3.684

≈3.68g/cm³

Water= 1g/cm³

The object will sink in water because the object is denser than the water.

3.684g/cm³ is the density of an object that has a mass of 350 g and a volume of 95 cm³. The object will sink in water.

The density of a material (volumetric density and specific mass) is its mass per unit volume. The most common sign for density is however the Roman letter D can be used as well. Density is defined mathematically as mass divided with volume.

The density of a pure material has the same numeric values just like its mass concentration. Various materials have varied densities, and density can be important in terms of buoyancy, purity, and packing.

D=m/v

=350/95

=3.684g/cm³

The object will sink in water

Therefore, 3.684g/cm³ is the density of an object that has a mass of 350 g and a volume of 95 cm³. The object will sink in water.

To learn more about density, here:

https://brainly.com/question/29775886

#SPJ2

Number of moles = mass/ molar mass

it implies that n(O2) = 24.0g / 32

= 0.75 mols

Answer:

C

Explanation:

The solution that will reach dynamic equilibrium is a saturated solution. The correct option is C.

A chemical solution in which the solute concentration is less than its equilibrium solubility is known as an unsaturated solution.

The solvent dissolves the entire solute.

When a solute (typically a solid) is mixed with a solvent (commonly a liquid), two reactions take place at the same time.

Thus, the correct option is C, the saturated solution.

Learn more about saturated solutions.

https://brainly.com/question/1851822

Answer:

C is the answer I believe.

Answer:

15.37 atm

Explanation:

According to Dalton's law of partial pressure, the total pressure of a mixture of gases in the tank is a sum of the individual pressures of all the gases. Hence;

PT = P1 + P2 + P3 -----------

So;

Ptotal = Phelium + Poxygen

Poxygen = 4.63 atm

Ptotal = 20.0 atm

Phelium = 20.0 atm - 4.63 atm

Phelium = 15.37 atm

Answer:

claw techniques

Explanation:

because it is

Recall that the determining factors for spontaneity of a reaction are the enthalpy and entropy changes that occur for the system. The free energy change of a reaction is a mathematical combination of the enthalpy change and the entropy change.

When both cases are satisfied, i.e. if the change in enthalpy is negative and the change in entropy is positive, the reaction is said to be spontaneous, and thus, enthalpy and entropy are the two driving thermodynamic forces of chemical reactions.

Combustion reactions, such as this fire, are spontaneous reactions. Once the reaction begins, it continues on its own until one of the reactants (fuel or oxygen) is gone. A nonspontaneous reaction is a reaction that does not favor the formation of products at the given set of conditions.

A spontaneous reaction is a reaction that favors the formation of products at the conditions under which the reaction is occurring. ... The entropy of the system increases during a combustion reaction. The combination of energy decrease and entropy increase dictates that combustion reactions are spontaneous reactions.

Answer:

.........................................................................................................................................................................................................................................................................................................................................................................................................................................................

Explanation:

If 36g of Al react with 34L of Oz, 0.667 moles of Al2O3 are produced. The correct option is b, 0.667 moles

The mole is a SI unit of measurement that is used to calculate the quantity of any substance.

[tex]\rm 4Al +3O_2 -- > 2Al_2O_3[/tex]

Step1- calculate the moles of aluminum

The mass of Al is 36 g

The molar mass of Al is 27

[tex]\rm Number\;of \;moles= \dfrac{mass}{molar\;mass}\\\rm Number\;of \;moles\;of\;Al = \dfrac{36}{27} = 1.33\;mol[/tex]

Step2- calculate the moles of oxygen

The mass of O₂ is 34 L

[tex]\rm 1 L = \dfrac{1}{22.4 }[/tex]

[tex]\rm Number\;of \;moles\;O_2= \dfrac{34}{22.4} = 1.51[/tex]

The limiting reagent is 1.33 MOL. By the rule of stoichiometry, four moles of Al produced 2 moles of Al.

[tex]\rm \dfrac{1.33}{2} = 0.665 \;moles[/tex]

Thus, the correct option is b. 0.667 moles.

Learn more about moles

https://brainly.com/question/26416088

#SPJ2

Answer:

d. 3.0

Explanation:

First we calculate the pOH of the solution, using the following formula:

Using the pOH we can calculate the pH of the solution, keeping in mind the relationship between pH and pOH:

The answer is option d.

Answer: Option C is correct

Grams solid x mol/g * A Hfusion

Explanation:

This is because from fusion is associated to melting and this is a process where solid particles or substances goes through transition phase and turn to liquid.

There for the stoichiometry is used to calculate energy absorbed when solid mass melt with the formula Grams solid x mol/g * A Hfusion.

Explanation:

An element is define as a substance which contains only those atoms which have same number of protons. Basically, an element contains atoms of one type only.

For example, a piece of sodium metal will contain only atoms of sodium.

An element can never be divided further into simpler substances. So, in the given figure box 1 is containing atoms of only blue color is an element.

A compound is a substance formed by the chemical combination of two or more different atoms present in a fixed ratio.    

For example, [tex]MgCl_{2}[/tex] is a compound which contains atoms of Mg and Cl in a 1:2 ratio.

The box containing pink and yellow balls in not a compound because here atoms are not chemically combined to each other but they are just present as individual atoms in same box. Hence, this is not a compound.

Therefore, when one or more elements are in a fixed ratio joined together they form a compound.

Answer:

The tendency of an object to resist changes in its state of motion varies with mass. Mass is that quantity that is solely dependent upon the inertia of an object. The more inertia that an object has, the more mass that it has. A more massive object has a greater tendency to resist changes in its state of motion.

Answer:

A positive acceleration means and increase

A negative acceleration is a decrease

a zero acceleration is a constant movement so its not increasing or decreasing just constant

Explanation:

What is a positive acceleration ?

If the velocity of an object increases with time, its acceleration is positive.

What is a zero acceleration ?

Zero acceleration is an acceleration, just with zero magnitude. Motion with constant velocity is just a special case of motion with uniform acceleration.

What is a negative acceleration ?

A negative acceleration means you will subtract from the current value of the velocity, and a positive acceleration means you will add to the current value of the velocity. ... And if the acceleration points in the opposite direction of the velocity, the object will be slowing down.

Answer:

In simple terms it is when two chemicals bond with each other

Explanation:

For more detailed explanation here's your answer:-

Answer:

I dont know what ur answers are but mine are option a and b fish will not out grow the tank and Concentration of waste in the water does NOT become harmful to the fish.

Explanation:

Answer:

8.7892x10^23

Explanation:

number of molecules equal number of moles times 6.02x10^23

Answer:

72

Explanation:

2n^2

n=6

2(6)^2=2×36

=72

Answer:

6KClO3 + 3H2SO4 → 2HClO4 + 4ClO2 + 3K2SO4 + 2H2O

Explanation:

It's a bit long because you will keep changing the coefficient to match both side.

Answer:

If you hace 4 moles of CaCl₂, you can make 8 moles of HCl.

Explanation:

The balanced equation is

CaCl₂ + 2 H₂O → Ca(OH)₂ + 2 HCl

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction) , the following amounts of each compound participate in the reaction:

Then you can apply the following rule of three: if by stoichiometry 1 mole of CaCl₂ forms 2 moles of HCl, 4 moles of CaCl₂ form how many moles of HCl?

[tex]moles of HCl=\frac{4 moles of CaCl_{2}*2 moles of HCl }{1mole of CaCl_{2}}[/tex]

moles of HCl= 8

If you hace 4 moles of CaCl₂, you can make 8 moles of HCl.