can_hike_to(List[List[int]], List[int], List[int], int) -> bool The first parameter is an elevation map, m, the second is start cell, s which exists in m, the third is a destination cell, d, which exists in m, and the forth is the amount of available supplies. Under the interpretation that the top of the elevation map is north, you may assume that d is to the north-west of s (this means it could also be directly north, or directly west). The idea is, if a hiker started at s with a given amount of supplies could they reach d if they used the following strategy. The hiker looks at the cell directly to the north and the cell directly to the south, and then travels to the cell with the lower change in elevation. They keep repeating this stratagem until they reach d (return True) or they run out of supplies (return False).

Assume to move from one cell to another takes an amount of supplies equal to the change in elevation between the cells (meaning the absolute value, so cell's being 1 higher or 1 lower would both cost the same amount of supplies). If the change in elevation is the same between going West and going North, the hiker will always go West. Also, the hiker will never choose to travel North, or West of d (they won’t overshoot their destination). That is, if d is directly to the West of them, they will only travel West, and if d is directly North, they will only travel North.


testcases:

def can_hike_to(m: List[List[int]], s: List[int], d: List[int], supplies: int) -> bool:

Examples (note some spacing has been added for human readablity)
map = [[5, 2, 6],
[4, 7, 2],
[3, 2, 1]]

start = [2, 2]
destination = [0, 0]
supplies = 4
can_hike_to(map, start, destination, supplies) == True

start = [1, 2]
destination = [0, 1]
supplies = 5
can_hike_to(map, start, destination, supplies) == False


this is my code:

from typing import List

def can_hike_to(arr: List[List[int]], s: List[int], d: List[int], supp: int) -> bool:
startx = s[0]
starty = s[1]
start = arr[startx][starty] # value
endx = d[0]
endy = d[1]

if startx == endx and starty == endy:
return True

if supp == 0:
return False

else:
try:
north = arr[startx-1][starty] # value
north_exists = True
except IndexError:
north = None
north_exists = False

try:
west = arr[startx][starty-1] # value
west_exists = True
except IndexError:
west = None
west_exists = False

# get change in elevation
if north_exists:
north_diff = abs(north - start)

if west_exists:
west_diff = abs(west - start)

if west_diff <= north_diff:
new_x = startx
new_y = starty - 1
supp -= west_diff
return can_hike_to(arr, [new_x, new_y], d, supp)

elif north_diff < west_diff:
new_x = startx - 1
new_y = starty
supp -= north_diff
return can_hike_to(arr, [new_x, new_y], d, supp)


# if north doesn't exist
elif not north_exists:
if west_exists:
new_x = startx
new_y = starty - 1
supp -= west_diff
return can_hike_to(arr, [new_x, new_y], d, supp)
if not west_exists:
return False

elif not west_exists:
if north_exists:
new_x = startx - 1
new_y = starty
supp -= north_diff
return can_hike_to(arr, [new_x, new_y], d, supp)
if not north_exists:
return False

print(can_hike_to([[5,2,6],[4,7,2],[3,2,1]],[2,2],[0,0],4)) # True
print(can_hike_to([[5,2,6],[4,7,2],[3,2,1]],[1,2],[0,1],5)) # False

it's supposed to return True False but it's returning True True instead. Could someone please respond fast, my assignment is due in less than 2 hours.

The block that is designed to catch any type of exception is b. catch(...){ }.

An exception is a runtime error that occurs while the program is running. An exception might be caused by issues such as an invalid input or a network failure. If an exception is not properly managed, it may result in program termination. To handle exceptions, C++ uses the "try-catch" block. The catch() block is a necessary part of the try-catch statement. This block catches any exceptions that are thrown in the try block. Here's the syntax of the try-catch statement: try { // some code that may throw an exception } catch (exceptionType e) { // code to handle the exception }When the "try" block throws an exception, the "catch" block catches it, and the exception is handled as defined in the code. To catch any type of exception, the syntax is like this: try { // some code that may throw an exception } catch (...) { // code to handle the exception }. Therefore, the correct answer is option B. catch(...){ } is the block that is designed to catch any type of exception.

Know more about runtime error here:

https://brainly.com/question/32506496

#SPJ11

C. FP Tree very expensive to buildThis statement is not true about the FP Growth Tree algorithm.

The construction of the FP Tree is generally considered to be efficient and less expensive compared to other frequent itemset mining algorithms like Apriori.The correct statement regarding the FP Growth Tree algorithm is:C. It extends the original database to build the FP treeThe FP Growth Tree algorithm extends the original database by adding a count for each item in each transaction, forming a compact representation of the frequent itemsets called the FP Tree. This compact representation allows efficient mining of frequent itemsets without the need for candidate generation.

To know more about algorithm click the link below:

brainly.com/question/12946457

#SPJ11

Information communication is the use of devices to communicate with others such as family and friends.

The given statement "A relation is said to be in second normal form if the primary key consists of a combination key, and the non key attributes are partially dependent on the primary key" is FALSE.

The Second Normal Form (2NF) rule is a part of the database normalization process that aims to decrease data redundancy in a table and boost data integrity by making certain that the table meets certain requirements.

A relation is in second normal form (2NF) if it satisfies the following conditions:

The table must already be in first normal form (1NF).Each non-primary key column is determined solely by the primary key, which means that every non-primary key column is determined by the whole primary key or by some combination of columns within the primary key.

There are no partial dependencies in the table, which means that a non-primary key column is never dependent on just a portion of the primary key.If a table does not have any non-prime attribute or has only one key attribute, it is automatically in second normal form (2NF).

Learn more about database at:

https://brainly.com/question/29869926

#SPJ11

Answer:

nice

Explanation:

:)

Answer:

cool congratulations

A tooltip appears when you move the pointer over a cell.

A tooltip is a small pop-up box that appears when the user hovers the mouse pointer over a specific element, such as a cell in a table or a button on a webpage. It provides additional information or a description related to the element being hovered over. In the context of the question, when the user moves the pointer over a cell, a tooltip may appear to provide details about the content of that cell or any other relevant information associated with it.

The tooltip helps in enhancing user experience by providing quick and contextual information without requiring the user to click or navigate to another page.

You can learn more about tooltip at

https://brainly.com/question/14840233

#SPJ11

Answer:

byeeeeeeee

Explanation:

Answer:

Heyyyyyyy

Byeeeeeee

Explanation:

Answer: The UTM represents a single point of failure

Explanation:

Unified threat management is a method used in information security which has to do with the installation of a single hardware or software that provides several security functions.

Even though it's easy to manage from a single device, the disadvantage is that within the information technology infrastructure, there is a single point of failure.

In this problem, we are implementing the Group ADT (Abstract Data Type) and the Diner ADT. The Diner ADT represents a diner and manages the number of free tables it has. The Group ADT represents a group of diners and manages their status.

For the Diner ADT, we have implemented the functions make_diner, num_free_tables, and name. The make_diner function creates a new diner with a given name and initializes the number of free tables to 0. The num_free_tables function returns the current number of free tables for a given diner. The name function returns the name of a given diner.

For the Group ADT, we have implemented the functions make_group, name, status, and start_eating. The make_group function creates a new group with a given name and initializes its status to 'waiting'. The name function returns the name of a given group. The status function returns the status of a given group. The start_eating function updates the status of a group to 'eating'.

In Question 1, we need to implement the add_table function for the Diner ADT. This function increases the number of free tables for a diner by 1.

In Question 2, we need to implement the serve function for the Diner ADT. This function allows a diner to use one of its free tables to seat a group. If there are no free tables, it returns the string 'table not free'. If there are free tables, it updates the group's status to 'eating' and reduces the number of free tables by 1.

In Question 3, we need to implement the finish_eating function for the Group ADT. This function sets a group's status to 'finished' and frees the table they were using, increasing the number of free tables for the diner by 1.

Overall, these functions allow us to manage the number of free tables in a diner and the status of groups as they wait, eat, and finish eating.

learn more about Group ADT here:

https://brainly.com/question/28562352

#SPJ11

That's correct! Laser beams have various applications in metalworking processes. Here are some common uses:

Welding: Laser welding is a precise and efficient method of joining metal parts. The focused laser beam generates heat, melting the metal surfaces, and creating a strong bond when the material cools down.

Drilling: Laser drilling involves using a high-power laser beam to create holes in metal surfaces. It is commonly used in applications where high precision and accuracy are required, such as aerospace and automotive industries.

Etching: Laser etching, also known as laser engraving, is a process of creating permanent marks or designs on metal surfaces. The laser beam removes or alters the surface layer of the metal, resulting in detailed and precise markings.

Cutting: Laser cutting is a versatile and precise method for cutting metals. The high-energy laser beam melts, burns, or vaporizes the material, creating a clean and accurate cut. It is widely used in industries such as manufacturing, electronics, and jewelry.

Marking: Laser marking involves using a laser beam to create permanent marks, logos, or identification codes on metal surfaces. It provides high-resolution and durable markings without affecting the integrity of the material.

The use of laser beams in metalworking processes offers numerous advantages, including high precision, speed, flexibility, and minimal heat-affected zones. It has revolutionized the manufacturing industry by enabling precise and efficient metal fabrication and customization.

learn more about Laser here

https://brainly.com/question/27853311

#SPJ11

Answer:

In Python:

entry = input("Sentence: ")

while True:

   if entry.count(",") == 0:

       print("Error: No comma in string")

       entry = input("Sentence: ")

   elif entry.count(",") > 1:

       print("Error: Too many comma in input")

       entry = input("Sentence: ")

   else:

       ind = entry.index(',')+1

       if entry[ind].isnumeric() == False:

           print("Comma not followed by an integer")

           entry = input("Sentence: ")

       else:

           break

print("Valid Input")

Explanation:

This prompts the user for a sentence

entry = input("Sentence: ")

The following loop is repeated until the user enters a valid entry

while True:

This is executed if the number of commas is 0

   if entry.count(",") == 0:

       print("Error: No comma in string")

       entry = input("Sentence: ")

This is executed if the number of commas is more than 1

   elif entry.count(",") > 1:

       print("Error: Too many comma in input")

       entry = input("Sentence: ")

This is executed if the number of commas is 1

   else:

This calculates the next index after the comma

       ind = entry.index(',')+1

This checks if the character after the comma is a number

       if entry[ind].isnumeric() == False:

If it is not a number, the print statement is executed

           print("Comma not followed by an integer")

           entry = input("Sentence: ")

If otherwise, the loop is exited

       else:

           break

This prints valid input, when the user enters a valid string

print("Valid Input")

Note that: entry = input("Sentence: ") is used to get input

When a number sign (#) is displayed in an Excel worksheet cell, it indicates an error or that the cell content is too long to be displayed fully.

When a column isn't broad enough to display all of the cell contents, Microsoft Excel may display ##### in the cells. Formulas that return dates and times as negative values can also be represented by #####.

When a formula or function has invalid numeric values, Excel displays this error. This frequently occurs when you submit a numeric value using a data type or number format that isn't supported in the formula's argument area.

Learn more about Excel at:

https://brainly.com/question/24749457

#SPJ1

The SQL statement that will return all of the CUSTOMER whose last name begins with Dunn is: SELECT * FROM CUSTOMER WHERE CUS_LNAME LIKE 'Dunn%';

Explanation: The SQL statement SELECT * FROM CUSTOMER WHERE CUS_LNAME LIKE 'Dunn%'; is used to return all of the CUSTOMER whose last name begins with Dunn."LIKE" is used for pattern matching and "Dunn%" denotes any value that starts with "Dunn". Therefore, this query returns all the rows with last name starting with "Dunn". The "%" sign is used as a wildcard in SQL. A relational database's structured query language (SQL) is a programming language used to store and process data. In a relational database, data is stored in tabular form, with rows and columns denoting various data qualities and the relationships between the values of those attributes. To store, update, remove, search for, and retrieve data from the database, utilise SQL statements. SQL can also be used to optimise and maintain database performance.

Know more about SQL statement here:

https://brainly.com/question/32258254

#SPJ11

Calibrating the coffee-cup calorimeter is crucial for accurate data collection in experiments because it ensures that the system's heat capacity is known for allowing for precise measurement of heat transfer.

Calibration of the coffee-cup calorimeter is essential because it establishes the heat capacity of the system, which is a critical factor in accurately measuring heat transfer during experiments. The calorimeter's heat capacity refers to the amount of heat energy required to raise its temperature by a certain amount. By calibrating the calorimeter, we determine its specific heat capacity and account for its thermal properties.

During an experiment, the calorimeter is used to measure the heat exchange that occurs between the substances being studied. To accurately calculate the heat transfer, it is crucial to account for the calorimeter's contribution to the total heat change. By calibrating the calorimeter, we can determine its heat capacity and factor it into the calculations, enabling more precise measurement of heat transfer.

Without calibration, there may be errors in the data collected due to an unknown or inaccurate heat capacity of the calorimeter. These errors can lead to incorrect measurements and inaccurate conclusions. Therefore, calibration ensures that the calorimeter's heat capacity is known, enabling reliable and accurate data collection in experiments involving heat transfer.

Learn more about callibration here:

brainly.com/question/32408352

#SPJ11

In Packet Tracer, the physical mode allows users to design and build a small network by visually representing the physical components and connections.

Packet Tracer is a network simulation tool developed by Cisco Systems that enables users to design, configure, and troubleshoot network scenarios. In physical mode, users can create a small network by selecting and placing physical devices such as routers, switches, computers, and cables on a virtual workspace.

By using the drag-and-drop interface, users can connect the devices and configure their physical attributes, such as interface connections, IP addresses, and subnet masks. This mode offers a realistic representation of the physical network components and their interconnections.

Physical mode in Packet Tracer is particularly useful for designing and building small networks because it allows users to visually plan and construct the network layout. It enables users to validate the feasibility and effectiveness of the network design before actual implementation. Additionally, users can simulate network traffic, test connectivity, and troubleshoot potential issues in a safe virtual environment.

Overall, Packet Tracer's physical mode offers a practical approach to design and build small networks by providing a visual representation of physical components and allowing users to configure and test network configurations in a simulated environment.

Learn more about packet tracer here:

brainly.com/question/30407257

#SPJ11

including enough detail to allow an attacker to exploit the vulnerability

The code segment that will produce the same output as the original code is D.

Explanation:

The original code segment iterates over each element n in the arr array and adds 2 * n to the sum variable. This effectively doubles each element in the array and accumulates the sum of all the doubled values.

Option D uses a similar approach but accesses the elements of the array directly using the index k. It iterates over the array indices from 0 to arr.length - 1 and adds 2 * arr[k] to the sum variable. This performs the same doubling operation on each element of the array.

Options A, B, and C use the index variable k instead of the array elements to calculate the sum. This would not produce the same output because it does not consider the actual values in the array.

Option E initializes the sum variable with arr[0] and then doubles each subsequent element arr[k] in the array. However, the loop condition k <= arr.length goes beyond the valid index range, leading to an ArrayIndexOutOfBoundsException. Therefore, option E is not equivalent to the original code.

Hence, the correct option that produces the same output as the original code is D.

learn more about code here

https://brainly.com/question/17204194

#SPJ11

Answer:

A  - Many of you have seen teachers who read the

slides on the screen word-for-word, which is

dull and repetitive.

The speed of the proton (vf)p remains unchanged when the distance between the particles doubles.

To find the speed of the proton (vf)p when the distance between the particles doubles, we need to consider the conservation of momentum.

Let's assume that the initial speed of the proton is (vi)p and the initial distance between the particles is di. When the distance between the particles doubles, the new distance becomes 2di.

According to the conservation of momentum, the momentum before and after the doubling of the distance should be the same.

Before: (mi * (vi)p) + (mj * (vj)) = initial momentum

After: (mi * (vf)p) + (mj * (vj)) = final momentum

Since we are interested in the speed of the proton, we can disregard the mass of the other particle (mj) and assume it remains constant.

Therefore, we have:

(mi * (vi)p) = (mi * (vf)p)

Simplifying the equation:

(vi)p = (vf)p

This means that the speed of the proton remains the same before and after the doubling of the distance between the particles.

In other words, the speed of the proton (vf)p remains unchanged when the distance between the particles doubles.

Learn more about doubles here:

https://brainly.com/question/31929070

#SPJ11

The correct statements about the set container are:

All the elements in a set must be unique and the elements in a set are automatically sorted in ascending order.

So, the correct answer is B and D.

The set container is an associative container used to store unique elements in a specific order. It is not similar to a size container. It is used when we need to store a group of unique values, and its size varies depending on the values added or removed from the set.

Set elements are always sorted by their value, and this is performed using a comparison function or operator

An associative container is a container that stores objects of a specific type and permits efficient retrieval of the object's values through the use of a key. It is used to implement tables, dictionaries, and maps.

Hence, the answer of the question is B and D.

Learn more about the set container at:

https://brainly.com/question/32226288

#SPJ11

Page tables store information about page locations, allocated page frames, and secondary storage space.

In computing, a page table is a data structure utilized by a virtual memory system in a computer operating system to keep track of the virtual-to-physical address translations. It represents the page frame allocation for the operating system's main memory.

Virtual memory is a memory management method that allows an operating system to expand its effective memory size by moving data from RAM to disk storage. Virtual memory addresses are used by the system's memory manager, and the page table is used to translate virtual memory addresses to physical memory addresses.

Learn more about virtual memory at;

https://brainly.com/question/32262565

#SPJ11

A vertical column along the left or right edge of a page containing text and/or graphic elements is called the sidebar.

The sidebar is a common design element in print and digital media that provides additional information or navigation options alongside the main content. It is typically positioned either on the left or right side of the page, allowing users to access supplementary content without interrupting the flow of the main content. Sidebars can include various elements such as menus, advertisements, related links, social media widgets, or call-to-action buttons. They serve to enhance the user experience by offering quick access to relevant information or actions.

You can learn more about sidebar at

https://brainly.com/question/30792620

#SPJ11

If the IRR is greater than the hurdle rate, we should accept the project.

In the capital budgeting decision process, the internal rate of return (IRR) is a financial metric utilized to examine the profitability of potential investments. The internal rate of return (IRR) is used to calculate the rate at which the net present value (NPV) of cash flows from a project equates to zero.The term "hurdle rate" refers to a minimum acceptable rate of return on investment, often determined by the firm's cost of capital, that must be reached before a capital investment project is authorized.

Many businesses, ranging from SMEs to MNCs, use capital budgeting as a financial process. This procedure involves calculating the costs associated with major projects including purchasing fixed assets, investing in equipment and resources, and funding R&D. To secure the highest possible income and revenue, a budget must be established for each of these significant expenses.

Companies are now understanding how crucial capital budgeting has become for managing their revenue and expenses effectively, which is why the field of capital budgeting as well as the philosophy behind it are expanding.

Know more about hurdle rate here:

https://brainly.com/question/30328497

#SPJ11

Answer:

4 Owo

Explanation:

XOXO

Kit

The service that allows users to save by purchasing a one-year or three-year contract and then being billed monthly at a reduced amount is known as a subscription-based service.

Subscription-based services offer users the option to commit to a longer-term contract, typically one year or three years, and in return, they receive a reduced monthly billing amount. This model encourages users to make a commitment upfront and provides cost savings over the duration of the contract.

By signing up for a longer-term contract, users can take advantage of discounted pricing compared to monthly billing without a contract. The reduced monthly amount allows users to save money over time and makes the service more affordable.

Subscription-based services are common in various industries, including software, media streaming, cloud services, and telecommunications. Examples include software subscriptions, streaming platforms, web hosting services, and mobile phone plans. These services provide flexibility, convenience, and cost savings for users who are willing to commit to a longer-term contract.

By offering discounted pricing through extended contracts, subscription-based services incentivize customer loyalty and provide a win-win scenario for both the service provider and the user.

Learn more about service here:

brainly.com/question/29908353

#SPJ11

Answer:

1. False

2. Rows and columns

3. Grid

Explanation: Bam

Zenmap identified three hosts on the subnet, but without specific information about the hosts and the scan results, it is not possible to determine the operating system versions revealed for each host.

Zenmap is a graphical user interface (GUI) for Nmap, a popular network scanning tool. Nmap is designed to discover and gather information about hosts on a network, including details about their operating systems. However, to determine the operating system version revealed by the scan for each host, specific information about the hosts and the scan results is needed.

Nmap employs various techniques, such as fingerprinting, to infer the operating system of a target host. It analyzes network responses, open ports, and other characteristics to make an educated guess about the operating system in use. However, the accuracy of the operating system detection can vary depending on factors such as firewall configurations, network responses, and the version of Nmap being used.

To determine the operating system version for each host identified by Zenmap on subnet, it would require analyzing the scan results generated by Nmap during the scanning process. These results typically include details about open ports, services, and potentially operating system information. Without access to these specific scan results or information about the hosts, it is not possible to ascertain the operating system versions revealed by the scan.

Learn more about subnet here:

brainly.com/question/32152208

#SPJ11

Certainly! Here's an example program in Java, named `CountChar.java`, that reads text from a file and counts the number of characters of different types:

import java.io.BufferedReader;

import java.io.FileReader;

import java.io.IOException;

public class CountChar {

   public static void main(String[] args) {

       String fileName = "input.txt"; // Replace with your input file path

       int uppercaseCount = 0;

       int lowercaseCount = 0;

       int punctuationCount = 0;

       int whitespaceCount = 0;

       int otherCount = 0;

       try (BufferedReader reader = new BufferedReader(new FileReader(fileName))) {

           String line;

           while ((line = reader.readLine()) != null) {

               for (char ch : line.toCharArray()) {

                   if (Character.isUpperCase(ch)) {

                       uppercaseCount++;

                   } else if (Character.isLowerCase(ch)) {

                       lowercaseCount++;

                   } else if (Character.isWhitespace(ch)) {

                       whitespaceCount++;

                   } else if (Character.isLetterOrDigit(ch)) {

                       punctuationCount++;

                   } else {

                       otherCount++;

                   }

               }

           }

           System.out.println("Uppercase letters count: " + uppercaseCount);

           System.out.println("Lowercase letters count: " + lowercaseCount);

           System.out.println("Punctuation marks count: " + punctuationCount);

           System.out.println("Whitespace count: " + whitespaceCount);

           System.out.println("Other characters count: " + otherCount);

       } catch (IOException e) {

           e.printStackTrace();

       }

   }

}

Make sure to replace `"input.txt"` with the actual path to your input file. This program reads the file line by line and counts the characters of different types using the `Character` class's utility methods.

When you run the program, it will display the count of uppercase letters, lowercase letters, punctuation marks, whitespace characters, and other characters in the given input file.

Learn more about Java here:

https://brainly.com/question/26803644

#SPJ11

Radio buttons work in a group to provide a set of mutually-exclusive options. This statement is true.

Radio buttons are an input control that allows users to choose one option from a list of options. These options are mutually exclusive, which means that only one option can be selected at a time. Radio buttons are commonly used in web forms, surveys, and questionnaires where users are required to choose one option from a list of options. When a user clicks on a radio button, it becomes selected and the previously selected option becomes unselected.Radio buttons are often used in conjunction with other input controls like text boxes, drop-down lists, and checkboxes to create complex web forms. The use of radio buttons in web forms helps to improve the user experience by making it easy for users to select the desired option. Radio buttons are a simple yet powerful input control that provides users with a set of mutually-exclusive options. They are easy to use and understand and are commonly used in web forms to improve the user experience.

To know more about the Radio buttons, click here;

https://brainly.com/question/31787557

#SPJ11

The data protection technique that is reversible when conducted properly is Tokenization. Tokenization replaces sensitive data with a random string of characters called a token.

Tokens are generated by the tokenization system and are unique to the data element that they are replacing. The tokens generated by the tokenization system can be reversed back to the original data, given the right key/tokenization database. A tokenization system stores a map between the original sensitive data and the generated token. If the original data is needed, the map can be used to look up the original data element using the token that was created at the time of tokenization and recover the original value. As a result, tokenization is a reversible process when executed correctly. Masking and hashing, on the other hand, are irreversible processes. They permanently alter the original data and, once masked or hashed, the original data cannot be recovered. The following are more than 100 words on how Tokenization can be reversed :Tokenization is a reversible process when executed correctly. Tokens are generated by the tokenization system and are unique to the data element that they are replacing. The tokens generated by the tokenization system can be reversed back to the original data, given the right key/tokenization database. A tokenization system stores a map between the original sensitive data and the generated token. If the original data is needed, the map can be used to look up the original data element using the token that was created at the time of tokenization and recover the original value. However, it's important to make sure that the tokenization database is securely protected since it contains the keys that can reverse the tokenization process.

To know more about Database visit:

https://brainly.com/question/31459706

#SPJ11