Answer:
99.64 N
Explanation:
To calculate the net force on particle q1, we need to consider both the force F₁ and the force F₂. Given that F₁ = -14.4 N, we already have that value. Now let's calculate the force between q₁ and q₃ using Coulomb's Law.
Coulomb's Law states that the force between two charged particles is given by:
F = (k * |q₁ * q₃|) / r²
where F is the force, k is the electric constant (k = 8.99 × 10⁹ Nm²/C²), q₁ and q₃ are the magnitudes of the charges, and r is the distance between them.
Substituting the given values into the formula:
F₂ = (8.99 × 10⁹ * |(+13.0 μC) * (+7.70 C)|) / (0.30 m)²
To simplify the calculation, we need to convert the charges into coulombs:
13.0 μC = 13.0 × 10⁻⁶ C
7.70 C remains the same
Now we can calculate the force:
F₂ = (8.99 × 10⁹ * |(13.0 × 10⁻⁶ C) * (7.70 C)|) / (0.30 m)²
F₂ ≈ (8.99 × 10⁹ * (0.0001001 C²)) / 0.09 m²
F₂ ≈ 8.99 × 10⁹ * 0.0011122 C² / 0.09 m²
F₂ ≈ 99.964 N
Therefore, the force between q₁ and q₃ (F₂) is approximately 99.964 N.
An the light emitted from electronic transition in a H atom for a transition from n = 3 to n = 2 has a characteristic wavelength range of 656 nm. Calculate the following: The frequency of the light em
Therefore, the frequency of the light emitted from this electronic transition is approximately 4.58 × 10^14 s^-1 (or hertz).
Electronic transition in a hydrogen atom for a transition from n = 3 to n = 2 has a characteristic wavelength range of 656 nm. To calculate the frequency of the light emitted, we can use the following equation: c = λν,where c is the speed of light, λ is the wavelength, and ν is the frequency. We are given the wavelength, so we can solve for the frequency:ν = c/λ = (3.00 × 10^8 m/s)/(656 nm × 10^-9 m/nm) ≈ 4.58 × 10^14 s^-1. Therefore, the frequency of the light emitted from this electronic transition is approximately 4.58 × 10^14 s^-1 (or hertz).
To know more about electron visit:
https://brainly.com/question/14904694
#SPJ11
The electric potential in a certain region is V = ax² + bx +c where a = 11 V/m², where b = −10 V/m², and c = 63 V. Determine the position where the electric field is zero.
The electric potential in a certain region is V = ax² + bx +c where a = 11 V/m², b = −10 V/m², and c = 63 V. We are supposed to find the position where the electric field is zero. Electric field is the negative of the gradient of potential, i.e.,
`E= -grad(V)`
Hence, to find where electric field is zero, we have to find the position where the gradient of potential is zero and then check whether that point is a point of minimum or maximum.
So, `E= -grad(V) = -(∂V/∂x) î`
For the given potential, `V = ax² + bx + c = 11x² - 10x + 63`
So, `E= -grad(V) = -(∂V/∂x) î = (-22x + 10) î`
Hence, electric field is zero when, `(-22x + 10) î = 0 => x = 5/11 m`
Therefore, the position where the electric field is zero is 5/11 m.
Learn more about electric fields: https://brainly.com/question/19878202\
#SPJ11
The period of your simple pendulum on earth is 0.2 s. You found out that the period of your simple pendulum in a certain planet is 0.1 s. What is the acceleration due to gravity on this planet?
The period of a simple pendulum is related to the acceleration due to gravity by the formula:
T = 2π√(L/g)
Where:
T is the period of the pendulum.
L is the length of the pendulum.
g is the acceleration due to gravity.
We can rearrange this equation to solve for g:
g = (4π²L) / T²
Given that the period on Earth is 0.2 s and the period on the other planet is 0.1 s, we can calculate the acceleration due to gravity on the other planet.
Let's assume the length of the pendulum remains constant. Plugging in the values into the equation:
g = (4π²L) / T²
g = (4π²L) / (0.1)²
Since we don't have the specific length of the pendulum, we cannot determine the exact value of the acceleration due to gravity on the other planet. However, you can substitute the known values of length (L) and solve for g using the equation above to find the specific acceleration due to gravity on that planet.
To know more about gravity
brainly.com/question/31321801
#SPJ11
A certain measuring instrument can measure lengths as short as 0.000000300 m. Write this length with the appropriate prefix.
A certain measuring instrument can measure lengths as short as 0.000000300 m. The length can be written with the appropriate prefix, which is the picometer (pm).
One picometer is equivalent to 1×10−12 meter or 0.000000000001 meter (1 trillionth of a meter).
The prefix "pico-" denotes a factor of 10−12 (0.000000000001). Therefore, 0.000000300 m can be written as 300 pm. This means that the measuring instrument can measure lengths up to 300 picometers or 0.0000000003 meters in length.
In summary, a certain measuring instrument can measure lengths as short as 0.000000300 m, which is equivalent to 300 picometers (pm).
To learn more about picometer refer:-
https://brainly.com/question/13493801
#SPJ11
Suppose that a car is 900 kg and has a suspension system that has a force constant k 6.53x104 N/m. The car hits a bump and bounces with an amplitude of 0.100 m. What is the car's displacement (x) when its vertical velocity is 0.500 m/s?
Suppose that a car is 900 kg and has a suspension system that has a force constant k 6.53x104 N/m. The car hits a bump and bounces with an amplitude of 0.100 m. when the car's vertical velocity is 0.500 m/s, its displacement (x) is approximately 0.083 meters.
To find the car's displacement (x) when its vertical velocity is 0.500 m/s, we need to use the principles of energy conservation.
The total mechanical energy of the car is conserved during the oscillatory motion. It consists of kinetic energy (KE) and potential energy (PE).
At the point where the car's vertical velocity is 0.500 m/s, all of its initial potential energy is converted into kinetic energy.
The potential energy of the car at its maximum displacement (amplitude) is given by:
PE = (1/2) × k × x^2
where k is the force constant of the suspension system and x is the displacement from the equilibrium position.
The kinetic energy of the car when its vertical velocity is 0.500 m/s is given by:
KE = (1/2) × m × v^2
where m is the mass of the car and v is its vertical velocity.
Since the total mechanical energy is conserved, we can equate the potential energy and kinetic energy:
PE = KE
(1/2) × k × x^2 = (1/2)× m × v^2
Substituting the given values:
(1/2) × (6.53 x 10^4 N/m) × x^2 = (1/2) × (900 kg) × (0.500 m/s)^2
Rearranging the equation to solve for x:
x^2 = (900 kg × (0.500 m/s)^2) / (6.53 x 10^4 N/m)
x^2 = 0.006886
Taking the square root of both sides:
x ≈ 0.083 m
Therefore, when the car's vertical velocity is 0.500 m/s, its displacement (x) is approximately 0.083 meters.
To learn more about energy conservation visit: https://brainly.com/question/166559
#SPJ11
Which One Is The Most Simplified Version Of This Boolean Expression ? Y = (A' B' + A B)' A. Y = B'A' + AB B. Y = AB' + BA' C. Y = B'+ A D. Y = B' + AB
which one is the most simplified version of this Boolean expression ?
Y = (A' B' + A B)'
A. Y = B'A' + AB
B. Y = AB' + BA'
C. Y = B'+ A
D. Y = B' + AB
The most simplified version of the Boolean expression Y = (A' B' + A B)' is: Y = A + B + A'
The correct answer is: C.
To simplify the Boolean expression Y = (A' B' + A B)', we can use De Morgan's theorem and Boolean algebra rules.
Let's simplify step by step:
Distribute the complement (') inside the parentheses:
Y = (A' B')' + (A B)'
Apply De Morgan's theorem to each term inside the parentheses:
Y = (A + B) + (A' + B')
Simplify the expression by removing the redundant terms:
Y = A + B + A'
The most simplified version of the Boolean expression Y = (A' B' + A B)' is:
Y = A + B + A'
Therefore, the correct answer is:
C. Y = A + B + A'
To know more about Boolean expression, here
brainly.com/question/29025171
#SPJ4
When 1243.4 V is applied across a wire that is 16.3 m long and has a 0.30 mm radius, the magnitude of the current density is 164.5 A/m2. Find the resistivity of the wire. O a. 1.02 Ohm. m O b. 0.46 Ohm. m O c. 0.70 Ohm. m O d. 1.44 Ohm.m O e. 0.19 Ohm. m
When 1243.4 V is applied across a wire that is 16.3 m long and has a 0.30 mm radius, the magnitude of the current density is 164.5 A/m2 then the resistivity of the wire is approximately 0.19 Ohm.m i.e., the correct option is e) 0.19 Ohm.m.
The resistivity of the wire can be determined using the formula:
ρ = (V / I) * (A / L)
where ρ is the resistivity, V is the voltage applied across the wire, I is the current, A is the cross-sectional area of the wire, and L is the length of the wire.
In this case, the voltage applied is 1243.4 V and the current density is given as 164.5 A/m².
We are also given the length of the wire as 16.3 m.
To find the resistivity, we need to determine the cross-sectional area of the wire.
The cross-sectional area of a wire can be calculated using the formula:
A = π * r²
where r is the radius of the wire.
Given that the radius is 0.30 mm, we need to convert it to meters by dividing it by 1000:
r = 0.30 mm / 1000 = 0.00030 m
Substituting the values into the equation, we have:
A = π * (0.00030)² = 0.00000028274334 m²
Now, we can calculate the resistivity:
ρ = (1243.4 / 164.5) * (0.00000028274334 / 16.3)
After performing the calculation, the resistivity of the wire is approximately 0.19 Ohm.m.
Therefore, the correct option is e) 0.19 Ohm.m.
Learn more about current density here:
https://brainly.com/question/31785329
#SPJ11
The length of Harry's forearm (elbow to wrist) is 25 cm and the length of his upper arm (shoulder to elbow) is 20 cm. If Harry flexes his elbow such that the distance from his wrist to his shoulder is 40 cm, find the angle of flexion of Harry's elbow.
The angle of flexion of Harry's elbow is approximately 55.1 degrees. To find the angle of flexion of Harry's elbow, we can use the law of cosines. Let's denote the angle of flexion as θ.
According to the law of cosines, we have:
c² = a² + b² - 2ab * cos(θ),
where:
c is the distance from Harry's wrist to his shoulder (40 cm),
a is the length of Harry's forearm (25 cm), and
b is the length of Harry's upper arm (20 cm).
Substituting the given values into the equation, we get:
40² = 25² + 20² - 2 * 25 * 20 * cos(θ).
Simplifying the equation further:
1600 = 625 + 400 - 1000 * cos(θ).
Combining like terms:
575 = 1000 * cos(θ).
Now, divide both sides of the equation by 1000:
cos(θ) = 575 / 1000.
Taking the inverse cosine (arccos) of both sides to find θ:
θ = arccos(575 / 1000).
Using a calculator, we find that arccos(575 / 1000) is approximately 55.1 degrees.
Therefore, the angle of flexion of Harry's elbow is approximately 55.1 degrees.
To learn more about law of cosines visit:
brainly.com/question/30766161
#SPJ11
A charged capacitor with a capacitance of C=5.00×10 −3
F, has an initial potential of 5.00 V. The capacitor is discharged by connecting a resistance R between its terminals. The graph below shows the potential across the capacitor as a funtion of the time elapsed since the connection. C.alculate the value of R. Note that the curve passes through an intersection point. Tries 1/20 Previous Tries
The value of resistance R is 3.48 kΩ.
The capacitance of a charged capacitor is C=5.00×10−3F, and its initial voltage is 5.00V. When a resistor R is connected between its terminals, it is discharged. The potential across the capacitor versus time since the connection is plotted in the graph shown.The capacitor's voltage and current change as it charges and discharges. The voltage across the capacitor as a function of time elapsed since the connection is shown in the graph.
The voltage of the capacitor decreases exponentially and eventually approaches zero as it discharges.The capacitor discharge is given by the following equation:q = Q × e−t/RCWhere R is the resistance, C is the capacitance, t is the time elapsed, and q is the charge stored in the capacitor at time t. The voltage across the capacitor can be determined using the following formula:V = q/C = Q/C × e−t/RC.
The voltage across the capacitor is plotted in the graph, and the intersection point is located at t = 5.0ms and V = 2.5V. As a result, the charge stored on the capacitor at that moment is Q = CV = 5.00×10−3F × 2.50V = 12.5×10−3C.The value of R can now be calculated using the formula:R = t/ln(V0/V) × C = 5.0×10−3s/ln(5.00V/2.50V) × 5.00×10−3F ≈ 3.48kΩTherefore, the value of resistance R is 3.48 kΩ.
Learn more about capacitor here,
https://brainly.com/question/31329178
#SPJ11
The only force acting on a 2.3 kg body as it moves along the positive x axis has an x component Fx = −4×N, where x is in meters. The velocity of the body at x=1.4 m is 9.1 m/s. (a) What is the velocity of the body at x=4.6 m ? (b) At what positive value of x will the body have a velocity of 5.5 m/s ? (a) Number ________________ Units _________________
(b) Number ________________ Units _________________
(a)
The velocity of the body at x = 4.6 m is -2.69 m/s.
Number: -2.69
Units: m/s
(b)
The positive value of x where the body will have a velocity of 5.5 m/s is 9.6 m.
Number: 9.6
Units: m
Mass of the body, m = 2.3 kg
Force acting on the body, Fx = −4 N
Initial velocity of the body, u = 0 m/s
Velocity of the body at x = 1.4 m, v = 9.1 m/s
Let's find the acceleration of the body at x = 1.4 ma
= F/m
= (-4 N)/2.3 kg
= -1.74 m/s²
(a)
Now, let's find the velocity of the body at x = 4.6 m
Final position of the body, x = 4.6 m
Initial position of the body, x = 1.4 m
Distance covered by the body, s = x - u = 4.6 - 1.4 = 3.2 m
Using the second equation of motion,
v² = u² + 2as
v² = 0 + 2 × (-1.74) × 3.2
v = -2.69 m/s
The velocity of the body at x = 4.6 m is -2.69 m/s.
Number: -2.69
Units: m/s
(b)
Now, let's find the positive value of x where the body will have a velocity of 5.5 m/s.
Final velocity of the body, v = 5.5 m/s
Initial velocity of the body, u = 0 m/s
Let the distance covered by the body be s meters.
Using the third equation of motion,v² = u² + 2as
5.5² = 0 + 2a × s
We know, a = -1.74 m/s²
5.5² = 2 × (-1.74) × s
s = 8.2 m
Therefore, the positive value of x where the body will have a velocity of 5.5 m/s is 1.4 + 8.2 = 9.6 m.
Number: 9.6
Units: m
Learn more about the equation of motion:
brainly.com/question/24018491
#SPJ11
Which of the following vectors is equivalent to 50 [553°E]? a. [-30,40] b. [40, -30] c. [-40, 30] d. [-40, -30] 2. Which of the following vectors is not collinear with the others? a. [-3,7] b. [6,-14] c. [-30, 70] d. [9, 21] 3. Determine the result of the dot product: [3,-4] [2,5] a. [6, -20] b. 14 C. -14 d. 26 4. Which of the following expressions involving dot product and cross product cannot be evaluated? a. (a.b) × (d.d) c. (a. b) + (ĉ. d) d. (axb). (¿xd) b. (axb) x (exd) 5. Albert is pushing his broken-down car. He pushed with a force of 8000 N at an angle of 10° to the horizontal to move the car 20 metres. How much work has Albert done? a. 75175 Nm. b. 160000 Nm c. 27784 Nm d. 157569 Nm 6. Determine the result of the cross product: [1, -2,3] x [-4,5,-6] b. [3, 6, 3] c. [27,-18, 13] a. [-3, -6, -3] d. [7,-8, 9] 7. Determine the angle between the vectors [1, 2, 3] and [4, 5, 6] a. 15.2° b. 12.9 c. 13.1 d. 0.97 8. For what value(s) of k are the two vectors [k, 2, 3] and [1, k, -2] perpendicular to each other? a. k = 2 and -2 b. k=2 c. k=-2 k=3 9. Choose the vector equation of a line through the point (4, 7) with direction vector m = [1, 5). a. (x, y) = [1, 5] + t[4, 7] c. (x, y] H [4, 7) + t[-5, 1) b. (x, y) = [1, 5] + t[-7,4] d. [x, y] [4, 7] + t(1, 5] 10. Which of the following is a scalar equation of the line with vector equation [x, y] [1, 3] + t[-1, -2]? a. 2x+y+1=0 b. x+2y-1=0 6.2x-y+1=0 d. x-2y+1=0 11. Which of the following is a vector equation of the line 2x - y = 7? a. [x, y] [4, 3] + t[1, 2] b. [x, y] = [2, 7] + [2, 4] 12. Which of the following does not have a normal of [1, 1, 1]? a. [x, y, z) = [2, 3, 1] + [-2, 3, -1] b. [x, y, z] [19, 12, 7] + t[-4, 5, -2] c. [x, y] = [4, 1] + t[2, -1] d. [x, y] = [5, 3] + t[-3, -6] c. [x, y, z) = [4, 0, 1] + t[1, 0, -1] d. [x, y, z]= [0, 0, 0] + [13, -7, -6]
Answer:
1. Option c. [-40, 30].
2. Option c. [-30, 70].
3. Option b. 14.
4. Option d. (axb) x (exd).
5. Option d. 157569 Nm.
6. Option c. [27, -18, 13].
7. Option a. 15.2°.
8. Option k = 2 and -2.
9. Option b. (x, y) = [1, 5] + t[-7, 4].
10. Option c. 6.2x-y+1=0.
11. Option a. [x, y] = [4, 3] + t[1, 2].
12. Option d. [x, y] = [5, 3] + t[-3, -6].
Here's an explanation:
1. The vector equivalent to 50 [553°E] is c. [-40, 30].
2. The vector that is not collinear with the others is c. [-30, 70].
3. The result of the dot product of [3, -4] and [2, 5] is b. 14.
4. The expression that cannot be evaluated is d. (axb) x (exd).
5. The work that Albert has done is d. 157569 Nm.
6. The result of the cross product of [1, -2, 3] and [-4, 5, -6] is c. [27, -18, 13].
7. The angle between the vectors [1, 2, 3] and [4, 5, 6] is a. 15.2°.
8. The value of k that makes the two vectors [k, 2, 3] and [1, k, -2] perpendicular to each other is k = 2 and -2.
9. The vector equation of a line through the point (4, 7) with direction vector m = [1, 5) is b. (x, y) = [1, 5] + t[-7, 4].
10. The scalar equation of the line with vector equation [x, y] = [1, 3] + t[-1, -2] is c. 6.2x-y+1=0.
11. The vector equation of the line 2x - y = 7 is a. [x, y] = [4, 3] + t[1, 2].
12. The equation that does not have a normal of [1, 1, 1] is d. [x, y] = [5, 3] + t[-3, -6].
Learn more about vector: https://brainly.com/question/15519257
#SPJ11
A particle of mass m is situated somewhere in between planets X and Y. The particle's location is at a distance d from planet X and at a distance 1.5d from planet Y. If planet X has a mass of M, and planet Y has a mass of 3M, then which planet exerts greater gravitational force on the particle? By how much, in percent?
Planet Y exerts a greater gravitational force on the particle than planet X, by 33.33%.
To find out which planet exerts greater gravitational force on the particle and the percent difference, use the formula for gravitational force:
F = G(m1m2/d^2)
where F is the gravitational force between the two objects, G is the gravitational constant, m1 and m2 are the masses of the two objects, and d is the distance between them.
Mass of the particle = m
Distance of the particle from planet X = d
Distance of the particle from planet Y = 1.5d
Mass of planet X = M
Mass of planet Y = 3M
Calculate the gravitational force on the particle due to planet X:
Fx = G(Mm/d^2)
Calculate the gravitational force on the particle due to planet Y:
Fy = G(3Mm/2.25d^2)
Simplifying:
Fy = (4/3)G(Mm/d^2)
The gravitational force on the particle due to planet Y is (4/3) times the gravitational force on the particle due to planet X. This means that planet Y exerts a greater gravitational force on the particle than planet X, by a factor of (4/3) - 1 = 1/3. Converting this to a percentage, we get:
Percentage difference = (1/3) * 100% = 33.33%
Therefore, planet Y exerts a greater gravitational force on the particle than planet X, by 33.33%.
Learn more about gravitational force: https://brainly.com/question/24783651
#SPJ11
A photographer uses his camera, whose lens has a 70 mm focal length, to focus on an object 1.5 m How far must the lens move to focus on this second object? away. He then wants to take a picture of an object that is 40 cm away. Express your answer to two significant figures and include the appropriate un
The lens must move approximately 0.103 meters to focus on the second object, and the distance of the image from the lens when taking a picture of an object that is 40 cm away is approximately 0.046 meters.
To determine the distance the lens must move to focus on the second object, we can use the lens formula:
1/f = 1/u + 1/v,
where f is the focal length of the lens, u is the distance of the first object from the lens (in meters), and v is the distance of the second object from the lens (in meters).
Given that the focal length of the lens is 70 mm, which is equivalent to 0.07 meters, and the distance of the first object is 1.5 meters, we can substitute these values into the formula:
1/0.07 = 1/1.5 + 1/v.
Simplifying this equation gives us:
v = 1 / (1/0.07 - 1/1.5).
Evaluating this expression, we find:
v ≈ 0.103 meters.
Therefore, the lens must move approximately 0.103 meters to focus on the second object.
For taking a picture of an object that is 40 cm away, we can use the same lens formula:
1/f = 1/u + 1/v,
where u is the distance of the object from the lens (in meters) and v is the distance of the image from the lens (also in meters).
Given that the focal length of the lens is 0.07 meters, we can substitute the values into the formula:
1/0.07 = 1/0.4 + 1/v.
Simplifying this equation gives us:
v = 1 / (1/0.07 - 1/0.4).
Evaluating this expression, we find:
v ≈ 0.046 meters.
Therefore, the distance of the image from the lens when taking a picture of an object that is 40 cm away is approximately 0.046 meters.
In summary, the lens must move approximately 0.103 meters to focus on the second object, and the distance of the image from the lens when taking a picture of an object that is 40 cm away is approximately 0.046 meters.
Learn more about focal length here:
https://brainly.com/question/31755962
#SPJ11
River water is collected into a large dam whose height is 65 m. How much power can be produced by an ideal hydraulic turbine if water is run through the turbine at a rate of 1500 L/s? (p= 1000 kg/m³ = 1 kg/L). [2]
The power that can be produced by an ideal hydraulic turbine if water is run through the turbine at a rate of 1500 L/s is 1.924 MW (megawatts).
The potential energy of the water in the dam is given by mgh, where m is the mass of the water, g is the acceleration due to gravity, and h is the height of the dam. The mass of the water can be determined using the density of water which is 1000 kg/m³ and the volume flow rate which is 1500 L/s, which gives m = 1500 kg/s.
The potential energy of the water is therefore given by: PE = mgh= 1500 × 9.81 × 65= 9,569,250 J/s or 9.569 MW (megawatts)
Since the hydraulic turbine is an ideal device, all the potential energy of the water can be converted to kinetic energy, and then to mechanical energy that can be used to turn a generator. The mechanical energy can be calculated using the formula KE = (1/2)mv², where v is the velocity of the water at the turbine. The velocity of the water can be determined using the formula Q = Av, where Q is the volume flow rate, A is the cross-sectional area of the turbine, and v is the velocity of the water.
Assuming the turbine has a circular cross-section, the area can be calculated using the formula A = πr², where r is the radius of the turbine.
Since the volume flow rate is given as 1500 L/s, which is equivalent to 1.5 m³/s, we have:1.5 = πr²v
The velocity of the water is therefore: v = 1.5/πr²
Substituting the value of v in the kinetic energy formula and simplifying, we obtain: KE = (1/2)mv²= (1/2)m(1.5/πr²)²= (1/2) × 1500 × (1.5/πr²)²= 2.774 W
Therefore, the power that can be produced by the hydraulic turbine is: PE = KE = 2.774 W= 2.774 × 10⁶ MW= 1.924 MW (approximately)
know more about hydraulic turbine
https://brainly.com/question/13065056
#SPJ11
Two guitar players, Yvette and Eddie, are tuning up their guitars to play a duet. When they play the A2 note (fl = 110 Hz), Eddie plucks his guitar at a location that is 1/5 of the length of the string (L = 65 cm), but Yvette plucks her guitar at a location that is closer to the bridge at 1/8 of the length of the string. Make an illustration that shows which resonances are most prominent in the spectrum of each players guitar pluck, including a hypothetical spectrum for each player.
Illustration:
|----------------- L -----------------|
Bridge | Nut
Yvette's Eddie's
Plucking Plucking
Location Location
<1/8 <1/5
Explanation:
In the illustration above, the horizontal line represents the length of the guitar string (L), with the bridge on the left and the nut on the right. Yvette and Eddie pluck their guitars at different locations along the string.
For Yvette's plucking location (1/8 of L), the resonance frequencies that are most prominent in the spectrum will correspond to the harmonic series based on that location. The harmonic series consists of integer multiples of the fundamental frequency, which is determined by the length of the string. Since Yvette plucks closer to the bridge, the effective length of the string is shorter, resulting in higher resonance frequencies. Therefore, Yvette's spectrum will show higher frequency resonances compared to Eddie's.
For Eddie's plucking location (1/5 of L), the resonance frequencies that are most prominent in the spectrum will also correspond to the harmonic series based on his plucking location. However, since Eddie plucks farther from the bridge, the effective length of the string is longer compared to Yvette's. As a result, Eddie's spectrum will show lower frequency resonances compared to Yvette's.
Hypothetical Spectrums:
Yvette's Spectrum:
|
|
|
|
|
|
-------------|-------------------> Frequency
|
|
|
|
|
|
Eddie's Spectrum:
|
|
|
|
|
|
|
--------------|-------------------> Frequency
|
|
|
|
|
|
Note: The diagrams above are simplified representations and may not accurately reflect the exact resonance frequencies or their amplitudes. The spectra would typically consist of a series of peaks or lines indicating the resonance frequencies and their intensities.
To know more about frequency.
https://brainly.com/question/29739263
#SPJ11
A proton accelerates from rest in a uniform electric field of 610 NC At one later moment, its speed is 1.60 Mnys (nonrelativistic because is much less than the speed of light) (a) Find the acceleration of the proton
(b) Over what time interval does the proton reach this speed ?
(c) How far does it move in this time interval?
(d) What is its kinetic energy at the end of this interval?
Answer: a. The acceleration of the proton is 5.85 × 10^14 m/s2.
b. The time interval to reach the speed of 1.60 × 10^6 m/s= 2.74 × 10^-9 s.
c. The proton moves a distance of 1.38 × 10^-5 m.
d. kinetic energy at the end of the interval is 2.56 × 10^-12 J.
Electric field = 610 N/c,
Initial velocity, u = 0 m/s,
Final velocity, v = 1.6 × 106 m/s
(a) Acceleration of the proton: The force acting on the proton = qE where q is the charge of the proton.
Therefore, ma = qE where m is the mass of the proton.
The acceleration of the proton, a = qE/m.
Here, the charge of the proton, q = +1.6 × 10^-19 C, The mass of the proton, m = 1.67 × 10^-27 kg. Substituting the values in the equation, we get, a = 1.6 × 10^-19 C × 610 N/C ÷ 1.67 × 10^-27 kg. a = 5.85 × 10^14 m/s^2
(b) Time taken to reach this speed: We know that, v = u + at. Here, u = 0 m/s, v = 1.6 × 106 m/s, a = 5.85 × 1014 m/s2. Substituting the values, we get,1.6 × 106 = 0 + 5.85 × 10^14 × tt = 1.6 × 106 ÷ 5.85 × 10^14 s= 2.74 × 10^-9 s
(c) Distance travelled by the proton: The distance travelled by the proton can be calculated using the equation,v^2 = u^2 + 2asHere, u = 0 m/s, v = 1.6 × 106 m/s, a = 5.85 × 10^14 m/s2Substituting the values, we get,1.6 × 10^6 = 0 + 2 × 5.85 × 10^14 × s. Solving for s, we get, s = 1.38 × 10^-5 m.
(d) Kinetic energy of the proton: At the end of the interval, the kinetic energy of the proton, KE = (1/2)mv^2 Here, m = 1.67 × 10^-27 kg, v = 1.6 × 10^6 m/s. Substituting the values, we get, KE = (1/2) × 1.67 × 10^-27 × (1.6 × 10^6)^2JKE = 2.56 × 10^-12 J.
Therefore, the acceleration of the proton is 5.85 × 10^14 m/s2.
The time interval to reach the speed of 1.60 × 10^6 m/s is 2.74 × 10^-9 s.
The proton moves a distance of 1.38 × 10^-5 m.
kinetic energy at the end of the interval is 2.56 × 10^-12 J.
Learn more about proton : https://brainly.com/question/1481324
#SPJ11
Buck - Boost converter system parameters: Vg=48V input voltage, output voltage Vo=12V, output load R=1~100Ω, output filter inductance L=100μH, capacitance C=220μF, switch frequency fsw=40kHz, namely switch cycle Tsw=25μs. PWM modulator sawtooth amplitude VM=2.5V. Feedback current network transfer function Hi(s)=1 feedback partial voltage network transfer function Hv(s)=0.5
Draw the circuit and give Detailed derivation of the transfer function.
The Buck-Boost converter system consists of an input voltage of 48V, an output voltage of 12V, and various parameters such as load resistance, filter inductance, capacitance, switch frequency, and PWM modulator sawtooth amplitude. The feedback current network transfer function is given as Hi(s) = 1, and the feedback partial voltage network transfer function is Hv(s) = 0.5. The circuit diagram and transfer function derivation will be explained in detail.
The Buck-Boost converter is a DC-DC power converter that can step up or step down the input voltage to achieve the desired output voltage. Here is a step-by-step explanation of the circuit and the derivation of the transfer function:
1. Circuit Diagram: The circuit consists of an input voltage source (Vg), an inductor (L), a switch (S), a diode (D), a capacitor (C), and the load resistance (R). The PWM modulator generates a sawtooth waveform (VM) used for switching control.
2. Operation: During the switch ON period, energy is stored in the inductor. During the switch OFF period, the stored energy is transferred to the output.
3. Transfer Function Derivation: To derive the transfer function, we analyze the circuit using small-signal linearized models and Laplace transforms.
4. Voltage Transfer Function: By applying Kirchhoff's voltage law and using the small-signal model, we can derive the voltage transfer function Vo(s)/Vg(s) as a function of the circuit components.
5. Current Transfer Function: Similarly, by analyzing the current flow in the circuit, we can derive the current transfer function Io(s)/Vg(s) as a function of the circuit components.
6. Feedback Transfer Functions: The given feedback transfer functions, Hi(s) and Hv(s), relate the feedback current and voltage to the input voltage.
7. Overall Transfer Function: The overall transfer function of the Buck-Boost converter system can be obtained by combining the voltage transfer function, current transfer function, and feedback transfer functions.
By following these steps, the detailed derivation of the transfer function for the Buck-Boost converter system can be obtained. The transfer function describes the relationship between the input voltage and the output voltage, and it helps in analyzing and designing the converter system for the desired performance.
To know more about the Buck-Boost click here:
https://brainly.com/question/30776258
#SPJ11
write the missing words in each of the following 1. The value of the electric flux ($) will be maximum when the angle between the uniform electric field (E) and the normal to the surface of the area equal to ..... 2. The formula of the work done (W) is: .......... 3. The relation between the electric field (E) and the electric potential (V) is ..... 4. If d is the distance between the two plates and A is the area of each plate, the capacitance of a parallel plate capacitor is given by 5. The charge (Q) stored in a capacitor can be given by..... 6. The product of the resistance of a conductor (R) and the current passing through it (I) is 7. The unit of the magnetic flux density is..... 8. A region in which many atoms have their magnetic field aligned is called a
The unit of the magnetic flux density is tesla (T), and a region in which many atoms have their magnetic field aligned is called a magnetic domain.Write a final answer:The missing words in each of the following are:1. 90 degrees2. W = F × d × cos(θ)3. E = -dV/dx4. C = εA/d5. Q = CV6. P = VI7. tesla (T)8. magnetic domain
1. The value of the electric flux ($) will be maximum when the angle between the uniform electric field (E) and the normal to the surface of the area is equal to 90 degrees.2. The formula of the work done (W) is: W = F × d × cos(θ), where F is the force, d is the displacement, and θ is the angle between the force and displacement.3. The relation between the electric field (E) and the electric potential (V) is E = -dV/dx, where dx is the distance between the points where the potential is measured.
4. If d is the distance between the two plates and A is the area of each plate, the capacitance of a parallel plate capacitor is given by C = εA/d, where ε is the permittivity of the medium between the plates.5. The charge (Q) stored in a capacitor can be given by Q = CV, where C is the capacitance and V is the potential difference between the plates.
6. The product of the resistance of a conductor (R) and the current passing through it (I) is P = VI, where P is the power dissipated by the conductor.7. The unit of the magnetic flux density is tesla (T).8. A region in which many atoms have their magnetic field aligned is called a magnetic domain.Write a conclusion:In conclusion, the maximum value of electric flux is attained when the uniform electric field (E) and the surface normal of the area are 90 degrees apart.
Additionally, the formula of the work done (W) is W = F × d × cos(θ), and the capacitance of a parallel plate capacitor is given by C = εA/d. The relationship between the electric field (E) and the electric potential (V) is E = -dV/dx, and the charge (Q) stored in a capacitor can be given by Q = CV.
Finally, the unit of the magnetic flux density is tesla (T), and a region in which many atoms have their magnetic field aligned is called a magnetic domain.Write a final answer:The missing words in each of the following are:1. 90 degrees2. W = F × d × cos(θ)3. E = -dV/dx4. C = εA/d5. Q = CV6. P = VI7. tesla (T)8. magnetic domain
Learn more about electric here,
https://brainly.com/question/14306881
#SPJ11
A modern 1,200 MWe nuclear power station converts thermal energy to electricity via a steam cycle with an efficiency of 33%. Over the year it consumed 25 tonnes of enriched uranium although refuelling and maintenance meant the plant was not generating for a total of 8 weeks. Calculate the average fuel burnup rate in GWd/t.
The average fuel burnup rate in GWd/t is 6,984.
To calculate the average fuel burnup rate in GWd/t, we need to determine the total energy generated by the reactor over the year. The formula for calculating the total energy generated is:
Total energy generated = Annual energy generation / efficiency
Given that the annual energy generation is 1,200 GW and the efficiency is 0.33, we can calculate the total energy generated as follows:
Total energy generated = 1,200 GW x 8,760 hours / 0.33 = 31,891,891 MWh
Next, we need to calculate the mass of uranium consumed by the reactor over a year. The specific energy release for enriched uranium used in a typical modern reactor is approximately 7,000 kWh/kg. Using this value, we can calculate the mass of uranium consumed as follows:
Mass of uranium consumed = Total energy generated / Specific energy release
Mass of uranium consumed = 31,891,891 MWh x 10^6 / (7,000 kWh/kg x 10^3) = 4,560 tonnes
Therefore, the mass of uranium consumed by the reactor over the year is 4,560 tonnes.
The fuel burnup rate is defined as the amount of energy produced per unit mass of fuel consumed. We can calculate the fuel burnup rate as follows:
Fuel burnup rate = Total energy generated / Mass of uranium consumed
Fuel burnup rate = 31,891,891 MWh x 10^6 / (4,560 tonnes x 10^3)
Fuel burnup rate = 6,984 GWd/t
Therefore, the average fuel burnup rate in GWd/t is 6,984.
Learn more about fuel
https://brainly.com/question/33339410
#SPJ11
Each of the following objects gives off light, but the majority of their light is given off in a certain part of the spectrum, according to Wien's Law. What is the wavelength of this peak radiation, and what portion of the spectrum does it cover? • a star at about 30,000 K • the corona of the Sun, at about 2,000,000 K • the surface of our skin, at about 297 K • the Sun, at about 6000K HINT: Problem 3 is a straightforward application of Wien's Law. Use the temperature to compute values of lambda-max, and use the electromagnetic spectrum in your book to determine the wavelength region. Remember that 1 Angstrom = 10⁻¹⁰ meters!
According to Wien's Law, the star at about 30,000 K emits peak radiation at a wavelength of 96.6 nm, corresponding to the ultraviolet portion of the spectrum. Similarly, the corona of the Sun, with a temperature of about 2,000,000 K, emits peak radiation at 1.45 nm in the extreme ultraviolet region.
Wien's law is a relationship that connects the temperature of an object to the wavelength at which it emits the most intense light. It states that the peak wavelength, known as λmax, is inversely proportional to the temperature of the object.
This law is also referred to as Wien's displacement law or Wien displacement law. By applying Wien's law, we can determine the wavelength of peak radiation and the corresponding portion of the electromagnetic spectrum for different temperatures, such as a star at 30,000 K, the Sun's corona at 2,000,000 K, the surface of our skin at 297 K, and the Sun at 6000 K.
[tex]\[\lambda_{max}=\frac{b}{T}\][/tex] where [tex]\[b=2.898×10^6\][/tex] nm-K.
It signifies that the peak of the blackbody radiation curve for an object of temperature T occurs at a wavelength [tex]\[\lambda_{max}\][/tex]
The wavelength of peak radiation and the spectrum part it covers for each object are given below:
The peak wavelength of light emitted by a star at approximately 30,000 K is:
[tex]\[\lambda_{max}=\frac{b}{T}=\frac{2.898×10^6}{30000}=96.6\][/tex] nm
The spectrum portion covered by this is Ultraviolet.
The corona of the Sun, with a temperature of about 2,000,000 K, emits light with a peak wavelength of:
[tex]\[\lambda_{max}=\frac{b}{T}=\frac{2.898×10^6}{2000000}=1.45\][/tex] nm
The spectrum portion covered by this is X-rays.
At a temperature of around 297 K, the surface of our skin emits light with a peak wavelength:
[tex]\[\lambda_{max}=\frac{b}{T}=\frac{2.898×10^6}{297000}=9.76\][/tex] µm
The spectrum portion covered by this is Far-infrared.
The Sun, with a temperature of about 6000 K, emits light with a peak wavelength of:
[tex]\[\lambda_{max}=\frac{b}{T}=\frac{2.898×10^6}{6000}=483\][/tex] nm
The spectrum portion covered by this is Yellow-green.
Learn more about wavelength at: https://brainly.com/question/24452579
#SPJ11
An electromagnetic wave travels in -z direction, which is -ck. What is/are the possible direction of its electric field, E, and magnetic field, B, at any moment? Electric field Magnetic field A. +Ei +Bj B. +Ej +Bi C. -Et +Bj
An electromagnetic wave travels in -z direction, which is -ck is the possible direction of its electric field, E, and magnetic field, B, at any moment. Therefore, options A, B, and C are all possible directions of the electric field and magnetic field of an electromagnetic wave.
An electromagnetic wave has two perpendicular fields that oscillate sinusoidally, one of which is electric and the other magnetic.
They are at right angles to one other and to the direction of the wave's movement. The magnetic field is always perpendicular to the electric field and the direction of wave propagation.
The electric field oscillates in the plane of the electric field and the direction of wave propagation. The magnetic field oscillates in the plane of the magnetic field and the direction of wave propagation.
The wave's direction of motion is in the -z direction. We may describe the electric field and the magnetic field with the help of these directions.
A. +Ei +Bj In the positive x direction, the electric field is perpendicular to the z direction. Since the electric field is oscillating in the plane of the magnetic field and the direction of wave propagation, it will have both i and j components.
The magnetic field is in the positive y direction and is perpendicular to the electric field and the direction of wave propagation. It is therefore represented by Bj. B. +Ej +Bi . In the positive y direction, the electric field is perpendicular to the z direction.
Since the electric field is oscillating in the plane of the magnetic field and the direction of wave propagation, it will have both i and j components. The magnetic field is in the positive x direction and is perpendicular to the electric field and the direction of wave propagation.
It is therefore represented by Bi.C. -Et +BjIn the negative x direction, the electric field is perpendicular to the z direction.
Since the electric field is oscillating in the plane of the magnetic field and the direction of wave propagation, it will have both i and j components. The magnetic field is in the positive y direction and is perpendicular to the electric field and the direction of wave propagation. It is therefore represented by Bj.
Therefore, options A, B, and C are all possible directions of the electric field and magnetic field of an electromagnetic wave.
Learn more about electromagnetic wave here:
https://brainly.com/question/29774932
#SPJ11
Consider the continuous-time signal x₂ (t) = cos [ 27 (500)t] which is sampled at fs = 400 samples/sec. a) Find an expression for the resulting discrete-time signal x[n] = x₂ (nT), T: f. b) Find a discrete-time sinusoidal signal y[n] = cos(N₂n), -r≤ ≤, which yields the same sample values as x[n] in part a). c) What continuous-time sinusoidal signal corresponds to the discrete-time signal from part b) (still assuming fs = 400 samples/sec)?
a) To find the expression for the resulting discrete-time signal x[n] = x₂(nT), where T = 1/fs is the sampling period and fs = 400 samples/sec is the sampling frequency, we substitute n = t/T into the continuous-time signal x₂(t):
x[n] = x₂(nT) = cos[27(500)(nT)]
= cos[27(500)(n/fs)]
Since fs = 400 samples/sec, the expression becomes:
x[n] = cos[27(500)(n/400)]
b) Now we need to find a discrete-time sinusoidal signal y[n] = cos(N₂n) that yields the same sample values as x[n] from part a).
Comparing the expressions, we have:
N₂ = 27(500)/fs
N₂ = 27(500)/400
N₂ = 33.75
So, the discrete-time sinusoidal signal y[n] is given by:
y[n] = cos(33.75n)
c) To find the continuous-time sinusoidal signal corresponding to the discrete-time signal y[n] from part b), we need to convert it back to continuous time using the same sampling frequency fs = 400 samples/sec.
Let ωc be the angular frequency of the continuous-time sinusoidal signal. We know that ωc = 2πfc, where fc is the continuous-time frequency. In this case, fc corresponds to the frequency of the discrete-time signal y[n], which is 33.75 cycles/sample.
We can calculate the continuous-time frequency as:
fc = 33.75 × fs
= 33.75 × 400
= 13500 Hz
Therefore, the continuous-time sinusoidal signal corresponding to the discrete-time signal y[n] is:
x₃(t) = cos(2π(13500)t)
#SPJ11
Learn more about continuous-time and discrete-time signal: https://brainly.in/question/10732752
A patient is receiving saline solution from an intravenous (IV) system. The solution passes through a needle of length 2.8 cm and radius 0.17 mm. There is an 8.00 mm-Hg gauge pressure in the patient's vein.
Use the density of seawater, 1025 kg/m3, for the solution. Assume its viscosity at 20 °C is 1.002×10−3 Pa·s.
Part (a) When the surface of the saline solution in the IV system is 1.1 m above the patient’s vein, calculate the gauge pressure, in pascals, in the solution as it enters the needle. For this first calculation, assume the fluid is approximately at rest.
Part (b) The actual volume flow rate of the saline solution through the IV system is determined by its passage through the needle. Find the volume flow rate, in cubic centimeters per second, when the saline solution surface is 1.1 m above the patient’s vein.
Part (c) If the saline solution bag is lowered sufficiently, the surface of the solution can reach a height at which the flow will stop, and reverse direction at even lesser heights. Calculate that height, in centimeters.
a)
The pressure is related to the depth using the formula,
P = ρgh
where P is pressure,
ρ is the density of the fluid,
g is the acceleration due to gravity, and
h is the height of the fluid column.
Therefore, using the values given, the gauge pressure at the vein is,
P1 = 8.00 mmHg
= 8.00 × 133.3 Pa
= 1066.4 Pa
The gauge pressure at the needle entry point is then,
P2 = P1 + ρgh = 1066.4 + 1025 × 9.81 × 1.1 = 12013.2 Pa ≈ 1.20 × 10⁴ Pab)
Using Poiseuille’s Law for flow through a tube, the volume flow rate is given by
Q = πr⁴ΔPP/8ηL
where Q is the volume flow rate,
r is the radius of the tube,
ΔP is the pressure difference across the tube,
η is the viscosity of the fluid,
and L is the length of the tube.
Therefore, using the values given,
Q = π(0.17 × 10⁻³ m)⁴ × (1.20 × 10⁴ Pa) / [8 × 1.002 × 10⁻³ Pa s × 2.8 × 10⁻² m]
= 1.25 × 10⁻⁷ m³/s
This can be converted into cubic centimeters per second as follows:
1 m³ = (100 cm)³
⇒ 1 m³/s = (100 cm)³/s
= 10⁶ cm³/s
∴ Q = 1.25 × 10⁻⁷ m³/s
= 1.25 × 10⁻⁷ × 10⁶ cm³/s
= 0.125 cm³/sc)
The flow will stop when the gauge pressure at the needle entry point is zero, i.e.,
P2 = ρgh = 0
Therefore = 0 / (ρg)
= 0 / (1025 × 9.81)
≈ 0 cm
Therefore, the height at which the flow will stop is approximately 0 cm.
Learn more about gauge pressure here
https://brainly.in/question/7901933
#SPJ11
A long nonconducting cylinder (radius =10 cm) has a charge of uniform density (6.0nC/m 3
) distributed throughout its column. Determine the magnitude of the electric field 2.5 cm from the axis of the cylinder.
To determine the magnitude of the electric field at a distance of 2.5 cm from the axis of the cylinder. The magnitude of the electric field at a distance of 2.5 cm from the axis of the cylinder is approximately 135,453 N/C.
Radius of the cylinder (r) = 10 cm = 0.1 m Charge density (ρ) = 6.0 nC/m³ Distance from the axis (d) = 2.5 cm = 0.025 m To calculate the electric field, we can use the formula: Electric field (E) = (ρ * r) / (2 * ε₀ * d) Where ε₀ is the permittivity of free space.
Substituting the given values and the constant value of ε₀ (8.854 x 10^-12 C²/(N·m²)) into the formula, we can calculate the magnitude of the electric field. Electric field (E) = (6.0 nC/m³ * 0.1 m) / (2 * 8.854 x 10^-12 C²/(N·m²) * 0.025 m) Calculating the expression: Electric field (E) ≈ 135,453 N/C
Learn more about electric field here:
https://brainly.com/question/11482745
#SPJ11
Newton's 2nd law of motion is only valid in inertial frame of reference. (i) Define what is meant by inertial frame of reference. (5 marks) (ii) Consider a reference frame that rotates at uniform angular velocity, but moves in constant motion with respect to a inertial frame. Write down the equation of motion of a particle mass m that moves with velocity with respect to rotating frame. Explain all the force terms involved in the Newton's law of motion for this case. (15 marks) 5/8 SIF2004 (iii) Consider a bucket of water set to spin about its symmetry axis at uniform w. the most form of effective as determined in (i), show that at equilibrium, the surface of the water in the bucket takes the shape of a parabola. State all assumptions and to approximations.
(i) An inertial frame of reference is a non-accelerating frame where Newton's laws of motion hold true.
(ii) In a rotating frame, the equation of motion includes the inertial force, Coriolis force, and centrifugal force, affecting the motion of a particle.
(i) Inertial Frame of Reference:
An inertial frame of reference is a frame in which Newton's laws of motion hold true, and an object at rest or moving in a straight line with constant velocity experiences no net force. In other words, an inertial frame of reference is a non-accelerating frame or a frame moving with a constant velocity.
(ii) Equation of Motion in a Rotating Frame:
In a reference frame that rotates at a uniform angular velocity but moves with constant velocity with respect to an inertial frame, the equation of motion for a particle of mass m moving with velocity [tex]\(\mathbf{v}\)[/tex]with respect to the rotating frame can be written as:
[tex]\[ m \left(\frac{d\mathbf{v}}{dt}\right)_{\text{rot}} = \mathbf{F}_{\text{inertial}} + \mathbf{F}_{\text{cor}} + \mathbf{F}_{\text{cent}} \][/tex]
where:
- [tex]\(\left(\frac{d\mathbf{v}}{dt}\right)_{\text{rot}}\)[/tex] is the rate of change of velocity of the particle with respect to the rotating frame.
- [tex]\(\mathbf{F}_{\text{inertial}}\)[/tex] is the force acting on the particle in the inertial frame.
- [tex]\(\mathbf{F}_{\text{cor}}\)[/tex] is the Coriolis force, which arises due to the rotation of the frame and acts perpendicular to the velocity of the particle.
- [tex]\(\mathbf{F}_{\text{cent}}\)[/tex]is the centrifugal force, which also arises due to the rotation of the frame and acts radially outward from the center of rotation.
The Coriolis force and the centrifugal force are additional apparent forces that appear in the equation of motion in a rotating frame.
(iii) Surface Shape of Water in a Spinning Bucket:
When a bucket of water spins about its symmetry axis at a uniform angular velocity, assuming the bucket is rotating in an inertial frame, the surface of the water in the bucket takes the shape of a parabola. This occurs due to the balance between gravity and the centrifugal force acting on the water particles.
Assumptions and Approximations:
- The bucket is assumed to be rotating at a constant angular velocity.
- The water is assumed to be in equilibrium, with no net acceleration.
- The surface of the water is assumed to be smooth and not affected by other external forces.
- The effects of surface tension and air resistance are neglected.
Under these assumptions, the shape of the water's surface conforms to a parabolic curve, as the centrifugal force counteracts the force of gravity, causing the water to rise higher at the edges and form a concave shape in the center.
Learn more about centrifugal force here:
https://brainly.com/question/545816
#SPJ11
The resistor in a series RCL circuit has a resistance of 90.00, while the rms voltage of the generator is 5.00 V. At resonance, what is the average power delivered to the circuit? P 2v
=
With an rms voltage of 5.00 V and a resistance of 90.00 Ω, the average power delivered to the circuit is approximately 0.278 W.
In a series RCL circuit at resonance, the reactance of the inductor and capacitor cancel each other out, resulting in a purely resistive circuit. At resonance, the impedance of the circuit is equal to the resistance.
The average power delivered to a resistor in an AC circuit can be calculated using the formula P = [tex]V_{rms} ^{2}[/tex] / R, where P is the average power, [tex]V_{rms} ^{2}[/tex] is the root mean square voltage, and R is the resistance.
Substituting the given values, we have P = [tex](5V)^{2}[/tex]/ 90.00 Ω = 0.278 W. Therefore, at resonance in the series RCL circuit, the average power delivered to the circuit is approximately 0.278 W.
Learn more about resonance here:
https://brainly.com/question/32273580
#SPJ11
Maxwell's Equation
A circular-plates capacitor of radius R = 22.0 cm is connected to a source of
emf E= Emsinωt, where Em = 237V and ω = 180rad/s. The maximum value
of the displacement current is id = 4.5μA.
(a) Find the maximum value of the current i in the circuit.
(b) Find the maximum value of dφE /dt, where φE is the electric flux through the
region between the plates.
(c) Find the separation d between the plates.
(d) Find the maximum value of the magnitude of ~B between the plates at a distance
r = 10.7 cm from the center.
A circular-plates capacitor with a radius of 22.0 cm is connected to a sinusoidal voltage source E = Emsin(ωt). The maximum current i is 4.5 μA. he maximum value of dφ [tex]\frac{E}{dt}[/tex] is 237 V * ω. Magnitude can be obtained using ampere's law.
(a) The maximum value of the current, i, can be determined by equating the displacement current, id, to the rate of change of electric flux, dφ [tex]\frac{E}{dt}[/tex], in the circuit. Since id is given as 4.5 μA, the maximum value of i is also 4.5 μA.
(b) The maximum value of dφ [tex]\frac{E}{dt}[/tex] can be calculated by taking the time derivative of the given emf expression E = Em sin(ωt). The derivative of sin(ωt) is ω cos(ωt). Multiplying this by the maximum value of Em (237 V), we get the maximum value of dφ [tex]\frac{E}{dt}[/tex] as 237 V * ω.
(c) The separation between the plates, d, can be found by rearranging the equation for capacitance, C = ε0 * [tex]\frac{A}{d}[/tex], where ε0 is the permittivity of free space and A is the area of the circular plates (π[tex]R^2[/tex]). Substituting the given values of R (22.0 cm) and the known value of C (from the problem), we can solve for d. d = ε0 * (π * R^2) / C.
(d) To find the maximum value of the magnitude of ~B at a distance r = 10.7 cm from the center, we can use Ampere's law in integral form, ∮ B · dl = μ0 * I_enc, where I_enc is the enclosed current. For a circular plate capacitor, the enclosed current is equal to the displacement current, id. By substituting the given value of id and the known values of μ0 and the circumference of the circular path (2πr), we can calculate the maximum value of ~B. Substituting these values into Ampere's law, we have:
B * (2πr) = μ0 * id
We can rearrange this equation to solve for B:
B = (μ0 * id) / (2πr)
Learn more about Ampere's law here:
https://brainly.com/question/32676356
#SPJ11
Hydroelectric generators at Hoover Dam produce a maximum current of 8.05 x 10³ A at 251 kV. a) What is the power output? ___________________ W b) The water that powers the generators enters and leaves the system at low speed (thus its kinetic energy does not change) but loses 155 m in altitude. How many cubic meters per second are needed, assuming 86 % efficiency? __________ m³/s
The power output Hydroelectric generators at Hoover Dam produce a maximum current of 8.05 x 10³ A at 251 kV is 2.022 x 10⁹W. Cubic meters per second needed by assuming 86 % efficiency is 1547.83 m³/s.
a) The formula to calculate the power output is,
Power (P) = Current (I) x Voltage (V)
It is given that, Current (I) = 8.05 x 10³ A and Voltage (V)= 251 kV= 251,000 V
Substituting these values into the formula:
Power = (8.05 x 10³ A) x (251,000 V)
Power = 2.022 x 10⁹ W
Therefore, the power output is 2.022 x 10⁹ watts.
b) To calculate the flow rate of water needed, we can use the formula:
Power (P) = Efficiency (η) x Density (ρ) x Acceleration due to gravity (g) x Flow rate (Q) x Height (h)
It is given that, Power (P) = 2.022 x 10⁹ W, Efficiency (η) = 0.86 (86% efficiency), Density of water (ρ) = 1000 kg/m³, Acceleration due to gravity (g) = 9.8 m/s², Height (h) = 155 m
Substituting these values into the formula:
2.022 x 10⁹ W = 0.86 x (1000 kg/m³) x (9.8 m/s²) x Q x 155 m
Simplifying the equation:
Q= (2.022 x 10⁹ W) / (0.86 x 1000 kg/m³ x 9.8 m/s² x 155 m)
Q=1547.83 m³/s
Therefore, 1547.83 cubic meters per second of water are needed, assuming 86% efficiency.
To learn more about power: https://brainly.com/question/11569624
#SPJ11
When the frequency of the AC voltage is doubled, the capacitive reactance whille the inductive reactance halves; doubles doubles; halves halves; halves doubles; doubles
When the frequency of the AC voltage is doubled, the capacitive reactance halves while the inductive reactance doubles.
When the frequency of the AC voltage is doubled, the capacitive reactance halves while the inductive reactance doubles. This is because the reactance of a capacitor is inversely proportional to the frequency of the AC voltage, while the reactance of an inductor is directly proportional to the frequency of the AC voltage.Capacitive reactance, denoted by XC, is given by the formula:XC = 1 / (2πfC)Where f is the frequency of the AC voltage, and C is the capacitance of the capacitor.
Since the reactance of the capacitor is inversely proportional to the frequency of the AC voltage, when the frequency of the AC voltage is doubled, the capacitive reactance will be halved.On the other hand, inductive reactance, denoted by XL, is given by the formula:XL = 2πfLWhere f is the frequency of the AC voltage, and L is the inductance of the inductor. Since the reactance of the inductor is directly proportional to the frequency of the AC voltage, when the frequency of the AC voltage is doubled, the inductive reactance will be doubled.
In conclusion, when the frequency of the AC voltage is doubled, the capacitive reactance halves while the inductive reactance doubles.
Learn more about frequency here,
https://brainly.com/question/254161
#SPJ11
After a bomb at rest explodes into two unequal fragments, the more massive fragment has the same kinetic energy as the less massive fragment. more kinetic energy than the less massive fragment. less kinetic energy than the less massive fragment.
When a bomb at rest explodes into two unequal fragments, the more massive fragment has less kinetic energy than the less massive fragment.
According to the law of conservation of momentum, the total momentum before and after the explosion must be the same. In this case, since the bomb is initially at rest, the total momentum before the explosion is zero. After the explosion, the two fragments move in opposite directions, but their combined momentum must still add up to zero.
Since momentum is the product of mass and velocity, if one fragment has a greater mass, it must have a lower velocity to maintain the total momentum at zero. As kinetic energy is proportional to the square of velocity, the more massive fragment will have a lower kinetic energy compared to the less massive fragment.
This phenomenon can be explained by the conservation of energy. The initial energy of the bomb is stored in the form of chemical potential energy. When the bomb explodes, this energy is converted into the kinetic energy of the fragments. However, due to the unequal masses, the less massive fragment receives a greater share of the initial energy, resulting in a higher kinetic energy.
Learn more about kinetic energy here:
https://brainly.com/question/999862
#SPJ11