Average kinetic energy is the average sum of all kinetic energy of all the molecules of gases. Therefore, the kinetic energy of the cart is 450J. Average kinetic energy is directly proportional to temperature.
What is kinetic energy?
It is a energy which is possess by a moving object. It is very difficult to find the correct value of kinetic energy so we find average kinetic energy. Which is very easy to calculate as compared to calculating kinetic energy. It is not dependent on the type of gases or mass of gases.
Mathematically,
K.E=1/2mv²
Where,
m= mass of object= 225 kg
v= velocity of object= 2 m/s
substituting all the given values in the above equation, we get
K.E=1/2×225 ×2²
K.E=450J
Therefore, the kinetic energy of the cart is 450J.
Learn more about the average kinetic energy, here:
https://brainly.com/question/22174271
#SPJ1
How many grams of CO would be
required to generate 635 g CO2?
Fe2O3 + 3CO → 2Fe + 3CO2
CO: 28.01 g/mol
CO2: 44.01 g/mol
[?] g CO₂
404.14 grams of CO will be needed to produce 635 g of CO₂ in this scenario.
The definition of stoichiometric co-efficient.The stoichiometric coefficient is the number put in front of the atoms, ions, and molecules in a chemical reaction to balance the amount of each element on the reactant and product sides of the equation.
In most cases, it is favorable for products and unfavorable for reactants. The stoichiometry of a chemical reaction is determined by stoichiometric coefficients.
Let's start by obtaining the reaction's equation:
The given reaction: Fe₂O₃ + 3CO → 2Fe + 3CO₂
We can see from the equation that the mole ratio of CO to CO2
The mole ratio of CO to that of CO₂= 3:3
The mole ratio of CO to that of CO₂= 1:1
Given that,
635 g of CO₂ is to be generated.
Mole of 635 g CO₂ = mass/molar mass = 635/44.01 = 14.43 moles
Thus, the equivalent mole of CO required will also be 14.43 moles.
Mass of 14.43 moles of CO = moles x molar mass
Mass of 14.43 moles of CO = 14.43 x 28.01
Mass of 14.43 moles of CO = 404.14 gm.
To produce 635 g of CO2, 404.14 gm of CO will therefore be needed.
To know more about Fe₂O₃ visit:
https://brainly.com/question/8993935
#SPJ1
if there were any other acids other than acetic acid present in vinegar, how would this affect your results
It would be challenging to calculate the percentage of simply acetic acid in vinegar if other acids were also present since they would mix with it.
Describe acid.A chemical that creates salts when it combines with specific metals while also releasing hydrogen atoms into water. Acids have a sour taste and give some colors, a reddish tint. Acids generated by the body, such stomach acid, can assist organ function. One type of acid is hydrochloric acid.
Where does acid come from?For instance, they can be used as an essential component in the chemical industry, like an electrolyte in a wet-cell battery (like a car battery), and to remove rust from metals.
To know about acid visit:
https://brainly.com/question/1512259
#SPJ4
So if you have a non-coated iron nail in water and the conditions do not change does it rust at the same rate every day. will the weight of the nail change in a constant pattern, for example, the weight of the nail to start would be 5.5 and the end weight would be 6.1 and it sits in the water for 5 days. would the nail gain all 0.6 grams of rust weight in a constant pattern of 0.1
Check the nails every day for the development of rust. Both the nails submerged in water should rust after three weeks, while the nail submerged in vinegar should rust after about one week.
What do you mean by Rust ?Rust is a similar coating created on a metal other than iron by corrosion. It is a reddish brittle coating that forms on iron especially when chemically attacked by damp air and is constituted primarily of hydrated ferric oxide.
Rust is a result of the reaction of iron with both air and water. Rust is a powder that forms from the oxygen in the air. Rusting is the process of rust creation. Rust is a reddish-orange flaky material. The metal surface is where rusting is more prone to happen because it is an oxidation process.
To know more about Rust please click here ; https://brainly.com/question/1477535
#SPJ1
An atom Y ha atomic number 13. It loe 3 electron in order to be table. What i the proton number and electron number of the atom
(a)before it loe electron
(b) after loing electron
(ii) name the of ion formed by the atom when it loe three electron. Show by illutration
In the following question the number of protons and electrons before it
a)lose electron are proton number= 13 electron =13
b) after losing electrons proton number=10 electron =10
c)the type of ion it becomes is a cation as it has a positive charge on it
What is atomic number?
The number assigned to a chemical element according to its atomic number in the periodic system, which places the elements in ascending order of the number of protons in their nuclei.
In the first scenario before loses electrons the number of protons and electrons in the atom before loses electron is 13, as given atomic number is 13.In second scenario After it loses 3 electrons Number of elctrons in the atom is 10 and number of protons is 13, as protons are present in the nucleus.
Therefore the number of protons is same i.e. 13 within the atom and no. of electrons after losing 3 electrons is 10 and it becomes a cation.
To know more about atomic number from the given link
https://brainly.com/question/11353462
#SPJ4
what is the maximum bond order that is possible for a bond between elements in the first two rows of the periodic table?
The Mo and W diatoms symbolize the greatest bond order attained between two atoms in the periodic table, which is six.
Can a bond order have more than three bonds?Bond order is the number of electron bonding pairs that exist between two atoms. A quadruple bond is a form of chemical relationship that involves eight electrons between two atoms. This bond is a variation on the more common double and triple bonds.
The number of bonds that an atom may make is frequently predicted by the number of electrons required to achieve an octet (eight valence electrons); this is notably true .
When three pairs of electrons come together, they create a triple bond.
learn more about W diatoms refer
https://brainly.com/question/1213876
#SPJ4
the atomic mass and abundance of Si-28 is 27.977 amu and 92.2%. The atomic mass and abundance of Si-29 is 28.976 amu and 4.7%. The atomic mass and abundance of Si-30 is 29.974 amu and 3.1%. which is the average atomic mass of silicon?
The average atomic mass of silicon has a natural abundance of Si-28 of 92.23% and Si-30 of 3.1%.
If the mass number of an atom of silicon, Si, is 28, how many neutrons does that atom contain?Because the amount of protons and electrons in a neutral substance is equal, silicon also contains 14 electrons. 28 - 14 protons equals 14 neutrons since the mass number is equal to the sum of the protons and neutrons.
With abundance and amu, how do you determine atomic mass?Unknown. By dividing by 100, convert each percentage of abundance to a decimal. This value should be multiplied by the isotope's atomic mass. Get the average atomic mass for each isotope by adding everything up.
To know more about mass number visit:-
https://brainly.com/question/4408975
#SPJ1
You plan to use the water displacement method to determine if a ring is pure silver
The water displacement method is a set of measurements used to calculate the volume of an irregularly shaped object. These objects are commonly known as irregularly shaped solids.
What is water displacement method ?The displacement method (also known as the submersion or dunking method) can be used to accurately measure the volume of the human body and other irregularly shaped objects by measuring the volume of fluid displaced when the object is submerged.
Place your jewelry on a table or in your hand, and pour some white vinegar directly on the metal (a dropper can also be used). If the metal of the jewelry changes color, it is not pure gold; if it continues to shine, you have real gold in your hand.
Thus, The water displacement method is a set of measurements used to calculate the volume of an irregularly shaped object.
To learn more about water displacement method, follow the link;
https://brainly.com/question/17342316
#SPJ1
a ph of 7.20 is slightly alkaline, yet a blood ph of 7.20 is called acidosis. why do you think it is called this?
As the normal pH of blood is around 7.35, a lower pH of 7.20 is considered to be an indicator of acidosis.
For the normal metabolic function of the human body, the pH of the blood in the arteries is maintained between 7.35 and 7.45 through a complex feedback system between the various systems.
Acidosis occurs when an excess of Carbonic acid formed due to the reaction of carbon dioxide with water, is present in the body. The two main organs responsible for maintaining the pH are the kidneys and lungs. Even though a pH of 7.2 is normally considered alkaline, it is acidic relative to the normal pH of the blood.
To learn more about pH :
https://brainly.com/question/12609985
Which reaction will most likely take place based on the activity series?
Li > K > Ba > Ca > Na > Mn > Zn > Cr > Fe > Cd > Ni > H > Sb > Cu > Ag > Pd > Hg > Pt
Pt + FeCl3 Right arrow.
Mn + CaO Right arrow.
Li + ZnCO3 Right arrow.
Cu + 2KNO3 Right arrow.
According to the reactivity series, Lithium is more reactive than Zinc therefore, Li + ZnCO₃ reaction will most likely take place. Therefore, option (C) is correct.
What is reactivity series?The reactivity series or the activity series can be defined as the arrangement of metals or elements in the descending order of their reactivities.
The metals at the top of the reactivity series are powerful reducing agents and can be readily oxidized and easily corrode. The reducing ability of metals becomes weaker while moving down the reactivity series.
Lithium is more reactive than Zn so it can displace Zinc from zinc carbonate therefore, Li + ZnCO₃ reaction will most likely take place. Pt is less reactive than Fe so it can not displace Fe from FeCl₃ therefore, Pt + FeCl₃ reaction will not take place.
Learn more about the reactivity series, here:
brainly.com/question/13960839
#SPJ1
Answer:
c
Explanation:
edge 2023
How many grams of Ag2S2O3 form
when 125.0 g AgBr reacts completely
according to the reaction below?
2AgBr + Na2S2O3 → Ag2S2O3 + 2NaBr
Ag2S2O3: 327.74 g/mol
AgBr: 187.70 g/mol
[ ? ] g Ag₂S2O3
A) Molar mass of AgBr,
MM = 1*MM(Ag) + 1*MM(Br)
= 1*107.9 + 1*79.9
= 187.8 g/mol
mass of AgBr = 0.45 g
mol of AgBr = (mass)/(molar mass)
= 0.45/1.878*10^2
= 2.396*10^-3 mol
B) According to balanced equation,
mol of Na2S2O3 formed = (2/1)* moles of AgBr
= (2/1)*2.396*10^-3
= 4.792*10^-3 mol
Answer: 4.79*10^-3 mol
B) Using: number of mol = M(Na2S2O3)*V(Na2S2O3)
4.792*10^-3 mol = 0.02 M * V
V = 0.240 L
V = 240 mL
To know more about Mole concept, visit:
https://brainly.com/question/16488605
#SPJ1
Answer:
Explanation:
it's 109.13 g Ag2S2O3 . i have it when i was in school :)
A random sample of carbon contains two isotopes: C-12 and C-13 with masses of 12.00 amu (5.00 %) and 12.99 amu (95.00 %) respectively. Determine the average atomic mass of this carbon sample and explain if your sample was a good representation of earth’s natural isotope abundance of carbon
Abbreviations along with the explanation are shown. Which set used in chemical equations is correct?
O (g). grams
O (aq), dissolved in water
O (1), liters
O, a gas is evolved
Answer:
B and D
Explanation:
Answer D, look like you're missing (g) which stands for gas
so answer B (which is aq) and answer D (which is g) are correct.
Grams and litters are not used in the chemical equations but used in calculation of the quantities of reactants and products.
350cubic centimetres of dilute hydrochloric acid in an experiment, what is this in dm3
350 cubic centimetres of dilute hydrochloric acid will be equivalent to 0.35 [tex]dm^3[/tex].
Volume ConversionThe problem here has to do with converting the volume of a liquid from cubic centimetres to [tex]dm^3[/tex].
Recall that:
1 centimetre = 0.1 dm
Thus:
1 cubic centimetre = 0.001 cubic decimetre or [tex]dm^3[/tex]
In this case, we are to convert 350 cubic centimetres to cubic decimetres.
If, 1 cubic centimetre = 0.001 cubic decimetre, then
350 cubic centimetres = 350 x 0.001
= 0.35 [tex]dm^3[/tex]
In other words, 350 cubic centimetres of dilute hydrochloric acid would be equivalent to 0.35 [tex]dm^3[/tex] of the dilute acid.
More on volume conversion can be found here: https://brainly.com/question/13259295
#SPJ1
s the electrical conductivity of carbonated water better than, worse than or similar to the electrical conductivity of pure water?
A poor conductor of electricity is pure water. The electric conductivity of regular distilled water is around 10 times when it is in equilibrium with atmospheric carbon dioxide.
Does carbonated water have more conductivity?On the other hand, it was discovered that different types of water had significantly varying conductivities, which indicate the overall amount of dissolved solids. And as predicted, pure water had the lowest conductivity while carbonated water had the greatest.
Does carbonation affect conductivity in any way?When the graphene content is less than 2.0%, it is discovered that electrical conductivity increases with increasing carbonation depth. In this instance, the cement matrix, which can be improved by carbonation product through filling pores, determines the electrical conductivity of the composite.
To know more about electric conductivity visit:-
https://brainly.com/question/5759256
#SPJ4
Granite has a specific heat of 800 J/g x °C. What mass of granite is needed to store 150,000 J of heat
if the temperature of the granite is to be increased by 15.5 °C?
O 12.1 g
O 745.3 J
O 12.1 Celsius degress
O 745.3 g
Plugging in the given values gives m = 745.3 g.
What is specific heat?Specific heat is the quantity of heat required to raise the temperature of a unit mass of a substance by one degree Celsius. It is measured in units of energy per unit mass per degree Celsius (J/ kg-K). The specific heat of a substance is determined by its physical and chemical properties. Typically, substances with higher specific heats require more energy to heat them up, meaning they are more resistant to changes in temperature. For example, water has a higher specific heat than most other substances, and therefore it takes a lot of energy to raise its temperature.
To find the mass of granite needed to store 150,000 J of heat, we need to use the formula for specific heat: q = m * c * ΔT. Rearranging this formula to solve for m gives m = q / (c * ΔT). Plugging in the given values gives m = 150,000 J / (800 J/g x °C * 15.5 °C) = 745.3 g.
To learn more about specific heat
https://brainly.com/question/28490764
#SPJ1
if your isolated product has succinimide present, what key feature should be present in the ir spectrum of your product?
If our product includes succinimide, the IR spectra should show a prominent peak at around 1700 cm-1, suggesting an incomplete reaction.
What function does succinimide serve?There are several applications for these chemicals. The succinimides ethosuximide, phensuximide, and methsuximide are among the medications used as anticonvulsants. Succinimides are also utilized in a number of test procedures to create covalent connections between peptides or protein chains and polymers.
What is the Succinimides' mode of action?Succinimides inhibit voltage-dependent calcium leakage in thalamic neurons via acting on calcium T channels. Either the gastrointestinal system (vomiting, nausea, and abdominal discomfort) or the central nervous system are ethosuximide's side effects (lethargy, dizziness, and ataxia).
To know more about Succinimides visit:
https://brainly.com/question/10287370
#SPJ4
Vinegar has a concentration of 0.87mol/L acetic acid to make a 100ml solution it is diluted by a factor of 10 how do u find the original volume of vinegar and the concentration of acetic acid in the diluted solution
To find the original volume of vinegar, we can use the following formula:
Original volume of vinegar = Diluted volume * Dilution factor
In this case, the diluted volume is 100 ml and the dilution factor is 10, so the original volume of vinegar is:
Original volume of vinegar = 100 ml * 10 = 1000 ml
To find the concentration of acetic acid in the diluted solution, we can use the following formula:
Diluted concentration of acetic acid = Original concentration of acetic acid / Dilution factor
In this case, the original concentration of acetic acid is 0.87 mol/L and the dilution factor is 10, so the diluted concentration of acetic acid is:
Diluted concentration of acetic acid = 0.87 mol/L / 10 = 0.087 mol/L
This means that the diluted solution has a concentration of 0.087 mol/L acetic acid.
Please give me brainliest for more high quality answers! - longstretch
Which molecule contains a nonpolar covalent bond?
A) H2
B) NH3
C) H₂O
D) CO
when 0.485 g of compound x is burned completely in a bomb calorimeter containing 3000 g of water, a temperature rise of 0.285°c is observed. what is δu of the reaction for the combustion of compound x? the hardware component of the calorimeter has a heat capacity of 3.81 kj/°c. the specific heat of water is 4.184 j/g·°c. the molar mass of compound x is 56.0 g/mol.
For 56 g/mol of the compound, change in the internal energy is calculated to be -539 kJ/mol.
What is calorimeter?Calorimeter is a device that is used to calculate the amount of heat involved in a chemical or physical process.
As, ΔU = Heat of calorimeter + Heat of solution
And we know, Heat = heat capacity * temperature
Given, 0.485 g compound
Then, ΔU = 3.81 0.285 + 4.184 3000 0.285
so, ΔU = 4.67 kJ
For 56 g/mol,
ΔU = (energy/ mass) * (moles/1)
ΔU = (4.67/0.485) *56
ΔU = 539 kJ/mol
As there is a rise in temperature in the reaction, therefore the negative sign is given to the internal energy, i.e. -539kJ/mol.
To know more about calorimeter, refer
https://brainly.com/question/2963957
#SPJ4
Four metal cubes, each at a different starting temperature, are placed in contact with each other. Which of the following describes the most likely flow of thermal energy in this situation? A Cube #4 to Cube #2 B Cube #1 to Cube #2 C Cube #3 to Cube #4 D Cube #1 to Cube #3
The answer should go like...
Cube #1 to Cube #3
Cube #2 to Cube #1
Cube #2 to Cube #4
Cube #4 to Cube #3.
what is the name of the compound below? multiple choice trans-3-bromocyclohexanecarboxylic acid cis-3-bromocyclohexanecarboxylic acid trans-5-bromocyclohexanecarboxylic acid cis-5-bromocyclohexanecarboxylic acid
The compound is called cis-3-bromocyclohexanecarboxylic acid. Out of the available possibilities, this is the best decision.
What is a carboxylic acid?The most significant functional group in C=O is the carboxylic acids. Some carboxylic acids, such citric acid, lactic acid, or fumaric acid, are produced through fermentation; the majority of these types of carboxylic acids are used in the food sector. This class of organic molecules can be obtained through several methods.
The significance of carboxylic acids in organic chemistry?Carboxylic acids play a significant role in organic chemistry and are used to create a variety of derivatives, including esters, acid anhydrides, acid chlorides, amides, etc. They are organic substances with one or more carboxyl groups in the molecules of their molecules.
To learn more about carboxylic acid visit:
brainly.com/question/4721247
#SPJ4
waghorne, w.e.; rous, a.j. determination of the relative atomic masses of metals by liberation of molecular hydrogen. j. chem. ed. 2009, 86, 350-351.
The relative atomic mass of the element is the average value of the hydrogen atom is 1.008 amu.
The mass of the one is the atomic mass. one amu is given as:
1 amu = 1.661 × 10⁻²⁷ kg
the hydrogen atom has the mass of = 1.6736 × 10⁻²⁴ g
The mass of the one twelfth carbon atom is given as :
= 1.661 × 10⁻²⁴ g
the relative atomic mass is given as follows :
Relative atomic mass = mass of the hydrogen atom/mass of 1/12 carbon atom
relative atomic mass = 1.6736 × 10⁻²⁴ g / 1.661 × 10⁻²⁴ g
Relative atomic mass = 1.008 amu
To learn more about relative atomic mass here
https://brainly.com/question/29746366
#SPJ4
Radiation Exposure from Dental X-rays Dental X-rays expose patients to about 5.00 μSv of radiation. 4th attempt Part 1 (I point) Feedback Given an RBE of 1.00 for X-rays, how many micrograys of radiation does 5.00 μSv represent?
The energy of radiation exposure from dental X-rays per given weight is 272.5 μJ.
The dental assistant can respond to this patient's concerns by telling the patient that the amount of radiation coming from the x-ray is minimal and will have no negative effect.
Given,
mass = 54.5 kg
Radiation = 5 μSv
Now
Energy per kg = 5 μSv *10⁻⁶ Sv / 14 Sv * 1 J/Kg/ 1 Sv
Energy per kg = 5 * 10⁻⁶ J/Kg
Then,
Energy per given weight of 54.5 kg
Energy per given weight = (54.5 kg)*(5*10⁻⁶)
Energy per given weight = 272.5 * 10⁻⁶ J
Therefore, energy of radiation exposure from dental X-rays per given weight is 272.5 μJ.
To know more about Dental X-ray, refer: https://brainly.com/question/29157665
#SPJ4
If a package has 3 servings and one serving has 300 calories. How many calories are you eating if you eat the whole package?.
If you eat the whole package, you would be eating a total of 900 calories.
What is calorie?
Calories are a measure of energy. Two main meanings of "calorie" are frequently used due to historical factors. The amount of heat required to increase the temperature of one kilogramme of water by one degree Celsius was the original definition of the huge calorie, food calorie, as well as kilogramme calorie (or one kelvin). The amount of heat required to produce the same rise in one gramme of water was known as the small calorie or gramme calorie. As a result, 1000 small calories are equal to 1 large calorie. The term "calorie" and the symbol "cal" almost always refer to the large unit in food and nutrition science.
If you eat the whole package, you would be eating a total of 900 calories (3 servings x 300 calories per serving = 900 calories).
To learn more about calorie
https://brainly.com/question/1061571
#SPJ4
if 3.8 g of cu3(po4)2(s) was recovered from step 1, what was the approximate [cu2 ] in the original solution? (the molar mass of cu3(po4)2 is 381 g/mol.)
If 3.8 g of Cu₃(PO₄)₂(s) was recovered from step 1, the approximate [Cu²⁺ ] in the original solution is 0.3 M
The approximate [Cu²⁺ ] in the original solution can be calculate as follows
first we should calculate the moles of Cu₃(PO₄)₂ by dividing the mass with its molar mass
Moles of Cu₃(PO₄)₂ = mass/ mass molar
Moles Cu₃(PO₄)₂ = 3.8 g / 381 g/mol = 0.1 moles
we know the balance reaction of this reaction is
3Cu²⁺ + 2Na₃PO₄ ⇒ Cu₃(PO₄)₂ + 6 Na⁺
with unitary method we can conclude 3 Cu²⁺ produce 1 Cu₃(PO₄)₂ so we can calculate the 3Cu²⁺
mol Cu²⁺ = 3/1 x mol Cu₃(PO₄)₂
mol Cu²⁺ = 3x 0.1 = 0.3 M
Your question is incomplete but most probably the full question attached below
To learn more about Molar Mass refer to:
brainly.com/question/21334167
#SPJ4
calculate the molarity of a kcl solution prepared by dissolving 1.01 moles of kcl in 250. ml of water. calculate the molarity of a kcl solution prepared by dissolving 1.01 moles of kcl in 250. ml of water. 2.02 0.00404 0.248 4.04 none of the above
The molarity of the KCl solution is 4.04 moles/ litre
What is molarity?
Molarity (M), which is determined by dividing the solute's mass in moles by the volume of the solution in liters, is the most widely used unit to express solution concentration: liters of solution/moles of solute equals M. One liter of a solution with a 1.00 molar concentration (1.00 M) contains 1.00 moles of solute.
The amount of a substance in a specific volume of solution is known as its molarity (M). The number of moles of a solute per liter of a solution is known as molarity. The molar concentration of a solution is another name for molarity.
Molarity = no. of moles/ volume of solution
Volume of KCl solution given is 0.25 L
molarity = 1.01 / 0.25
molarity = 4.04 moles/ litre
TO know more about molarity you may visit the link:
https://brainly.com/question/8732513
#SPJ4
12) a. Calculate the mass defect in Fe-56 if the mass of
an Fe-56 nucleus is 55.921 amu. The mass of a
proton is 1.00728 amu and the mass of a neutron
is 1.008665 amu.
Show work
b. Determine the binding energy of an O-16
nucleus. The O-16 nucleus has a mass of 15.9905
amu. A proton has a mass of 1.00728 amu, a neutron has a mass of 1.008665 amu, and 1 amu is equivalent to 931 MeV of energy.
Show work
c. What percentage of a radioactive substance
remains after 7.00 half-lives have elapsed?
Show work
d. Carbon-11 is used in medical imaging. The half-
life of this radioisotope is 20.4 min. What
percentage of a sample remains after 60.0 min?
show work
The mass defect in fe-56 is 0.528.
Binding energy - quantity of energy required to split a particle from a machine of debris or to disperse all of the debris of the system. Binding power is particularly applicable to subatomic debris in atomic nuclei, to electrons bound to nuclei in atoms, and to atoms and ions certain collectively in crystals.
Binding energy is the minimal quantity of electricity required to free an item from a sure machine and escape from its place of have an impact on (i.e. break out to infinity). inside the given case, it's miles the energy required through the satellite to depart its orbit around the earth and break out to infinity.
Learn more about Binding energy here:-
brainly.com/question/23020604
#SPJ4
How many grams of PbSO4 would
be produced from the complete
reaction of 23.6 g PbO2?
Pb+ PbO2 + 2H2SO4
PbO2: 239.2 g/mol
PbSO4: 303.27 g/mol
→
2PbSO4 + 2H2O
{? ] g PbSO4
One mole or 239.2 g of PbO₂ or 239.2 g gives two moles or 606.5 of lead sulphate. Thus, 23.6 g of lead oxide will give 59.84 g of lead sulphate.
What is lead oxide?Lead oxide is an ionic compound formed by the ionic bonding between the transition metal lead and oxygen by losing two electrons from lead to oxygen. It reacts with sulphuric acid giving lead sulphate PbSO₄.
As per the given balanced reaction, one mole of lead oxide gives two moles of lead sulphate.
Molar mass of PbO₂ = 239.2 g/mol
Molar mass of PbSO₄ = 303.27 g/mol
2 moles of PbSO₄ = 2 × 303.27 = 606.54 g.
Thus, 239.2 g of lead oxide gives 606.54 g of PbSO₄. The mass of PbSO₄ produced from 23.6 g of lead oxide is:
= (23.6 × 606 .54 )/ 239.2 g
= 59.84 g.
Therefore, the mass of PbSO₄ produced from 23.6 g of PbO2 is 59.84 g.
To find more on lead oxide, refer here:
https://brainly.com/question/13264277
#SPJ1
how many constitutionally isomeric ethers are there with a formula of c4h10o? multiple choice only one two three four
The isomeric ethers with a formula of C4H10O are three. Isomers do not share similar chemical or physical properties.
What are isomers?Isomers are compounds that have exactly the same number of atoms, that is, they have exactly the same empirical formula, but differ from each other by the arrangement of atoms. It is important to be able to recognize isomers because they have different chemical, physical and biological properties.
Structural isomers can be divided into : functional group isomers, chain isomers, and positional isomers.
In chemistry, isomers are molecules or polyatomic ions with identical molecular formulae but distinct arrangements of atoms in space.
To know more about isomers, refer
https://brainly.com/question/2705480
#SPJ4
What are the values of δs for the water, the surroundings, and the universe for the evaporation of water from an open pan at 25°c?.
The Entropy(ΔS) (water) is positive, and ΔS (surrounding) is negative, Water does evaporate, so the process is spontaneous, which means ΔS (universe) > 0 according to the Second Law of Thermodynamics.
What is Entropy (ΔS)?
The measure of a system's disorder is called entropy. It is a thermodynamic system's extensive attribute, which means that the amount of matter in the system affects how much it is worth. Entropy is typically represented in equations by the letter S and has units of joules per kelvin (J/K1) or (kg/m2/s2K1). Low entropy describes a highly ordered system.
What is the Second law of thermodynamics?
The entropy will either rise or stay the same in every cyclic process, according to the Second Law of Thermodynamics. Entropy, sometimes known as the "direction of time's arrow," provides information on how an isolated system evolves through time. If two separate pictures of the same system show one state that is more disordered than the other, it may be assumed that this state emerged later in time. In the case of an isolated system, the flow of events leads to a state where the system is more disordered or has the higher entropy.
Hence, ΔS (water) is positive, and ΔS (surrounding) is negative, Water does evaporate, so the process is spontaneous, which means ΔS (universe) > 0 according to the Second Law of Thermodynamics.
To know more about Entropy, check out:
https://brainly.com/question/6364271
#SPJ4