c) Which is the limiting reactant?
-
Cu(s) + AgNO3(aq) → CuNO3(aq) + Ag(s)
2 mol of copper react with 250 g of AgNO3(aq)
a) How many moles of Ag is formed?
b) What mass, in grams of CUNO3(aq) is produced?
c) Which is the limiting reactant?

Glycerol (molar mass= 92.09g/mol) has an enthalpy of combustion of -1654 kJ/mol. The mass of glycerol is needed  is

Q water = mc ΔT

             = 500 × 4.184 × ( 100 - 20)

             = 167.36 kJ

Q glycerol = 167360 J = n ΔH

167360 = n × ( 1654)

n = 0.101 mol

mass = moles × molar mass

        = 0.101 × 92.09

        = 9.3 g

Thus, Glycerol (molar mass= 92.09g/mol) has an enthalpy of combustion of -1654 kJ/mol.  mass of glycerol is needed to raise the temp of 500 g water from 20 °C to 100 °C is 9.3 g.

To learn more about enthalpy of combustion here

https://brainly.com/question/25024126

#SPJ1

The change in entropy when the divider is removed from the container and all three molecules are allowed to mix together,as a result, the change in Entropy will be positive.

What is entropy?

Entropy is a critical concept that students must properly understand while studying Chemistry and Physics. More crucially, entropy can be defined in numerous ways and hence applied in numerous stages or instances, such as a thermodynamic stage, cosmology, and even economics. Entropy, in its most basic form, refers to the spontaneous changes that occur in everyday events or the universe's inclination toward chaos.

We do not consider the microscopic aspects of a system from the standpoint of entropy in thermodynamics. Entropy, on the other hand, is used to characterise a system's behaviour in terms of thermodynamic variables such as temperature, pressure, entropy, and heat capacity. This thermodynamic description took into account the systems' state of equilibrium.

Entropy is a physical property that is commonly associated with chaos, unpredictability, or uncertainty. Because all three molecules started on the left side of the container, they are mingled together. This suggests that molecules are organised at random.

Learn more about entropy from given link

https://brainly.com/question/6364271

#SPJ4

The concentration of a solution expressed in moles of solute per 1 l of the solution is called Molarity.

Concentration is the abundance of a constituent divided by way of the overall volume of an aggregate. several sorts of mathematical descriptions may be outstanding: mass concentration, molar concentration, variety concentration, and extent awareness.

The concentration of a substance is the quantity of solute found in a given amount of solution. Concentrations are normally expressed in terms of molarity, defined because of the variety of moles of solute in 1 L of answer.

The Concentration of a solution is a measure of the quantity of solute that has been dissolved in a given amount of solvent or answer. A concentrated answer is one that has a rather huge quantity of dissolved solute

Learn more about concentration here:-https://brainly.com/question/26255204

#SPJ4

The amount of heat to absorb is 6261 J

The heat capacity is the amount of heat expressed usually in Joules or calories needed to change the system by 1 degree Celsius

Here the calculation for heat is

Heat required to raise the temprature of ice form -20°C to 0°C

Then the formula for specific heat is used to calculate the amount of heat

Q = c×m×ΔT

Where Q = heat exchanged by a body

m = mass of the body

c = specific heat

ΔT = change in temprature

Then the given data is

m = 10g

Specific heat of the ice = 2.1

ΔT =  0°C - (-20°C) = 20°C

Then substituting the value

Q = 10g× 2.1× 20°C

Q = 420 J

Heat required to convert 0°C ice to 0°C water

The heat Q necessary to melt a substances depend on its mass m and this called latent heat of fusion of each substances

Q = m×ΔH fusion

Heat required to raise the temprature of water from 0°C to 60°C

m = 10g

Specific heat of water = 4.18

ΔT = 60°C -(- 0°C) = 60°C

Then substituting

Q = 10g×4.18×60°C

Q = 2508 J

Then Q total = 420J+3333J+2508J

Q total = 6261 J

The amount of heat to absorb is  6261 J

Know more about ice

https://brainly.com/question/17150917

#SPJ4

The number of moles of atoms in each of the following is :

1) 0.5 mol

2) 2.9 mol

3) 1.49 mol

4) 1.9 mol

1) 3.01 × 10²³ atoms of zinc

3.01 × 10²³ atoms of zinc =  (3.01 × 10²³) / (6.022  × 10²³) moles

                                          = 0.5 mol

2) 1.806 × 10²⁴ atoms of Ba

1.806 × 10²⁴ atoms of Ba = (1.806 × 10²⁴ ) / (6.022  × 10²³) moles

                                         = 2.9 mol

3) 9.03 × 10²³ atoms of S

9.03 × 10²³ atoms of S =  9.03 × 10²³ /  (6.022  × 10²³) moles

                                       = 1.49 mol

4) 1.204 × 10²⁴ atoms of Na

1.204 × 10²⁴ atoms of Na =  1.204 × 10²⁴ / (6.022  × 10²³) moles

                                          = 1.9 mol

Thus, The number of moles of atoms in each of the following is :

1) 0.5 mol

2) 2.9 mol

3) 1.49 mol

4) 1.9 mol

To learn more about moles here

https://brainly.com/question/26416088

#SPJ4

The pertinent hydrolysis reactions of the ions in the salt solutions are as follows:

- For the Na+ ion, the hydrolysis reaction is:

- For the Cl- ion, the hydrolysis reaction is:

- For the SO42- ion, the hydrolysis reaction is:

The measured pH values for the individual salt solutions are as follows:

The pH values measured for the individual salt solutions are reasonable. The measured pH values agree with the prediction.

The measured pH values agree with the predictions because the measured pH values are within the range of the expected pH values for each salt.

Learn more about salt solutions:

https://brainly.com/question/11740694

#SPJ4

Answer:

2.09 atm

Explanation:

Given: Temperature of system. volume of system, and masses of component gasses.

In order to get the mole fraction which we will use later, convert the 60.0 g CO2 and 82.1 g H20 into moles and add the number of moles you got yo 7.30.

(60.0g CO2 / 44.01 g/mole) + (82.1g H20/18.02) + 7.30 moles unknown fuel

This should work out to about 13.22 moles total. Then, plug in your numbers to the ideal gas law (PV=nRT or P=nRT/V). This will result in the total pressure of the system. p=(13.22 moles)x(0.08206 l*ATM/moles *K)x(468.2)/25.0L. This equation results in a total of 20.3 atm. According to Daltons law of partial pressure, the mole fraction (moles of a gas over total moles) of a given gas times the total pressure of the container gives the partial pressure.

(1.36/13.22) * 20.3 atm=2.09 atm

In lab we applied the conservation of energy to a system to allow us to equate the initial energy to the final energy. Here the initial energy become stored in the system. It is due the reason that:

The force of gravity does work on the mass when it is displaced some height when the pendulum is displaced by some angle theta.

Work done by the gravitational force is W = mgh , it is known as potential energy of the body.

When, body displaced some height then work done by the gravitational force store as energy in the system.

So, the force of gravity does work on the mass, when it is displaced some height .

What do you mean by force of gravity ?

“Every particle of matter in the universe attracts every other particle with a force that is directly proportional to the product of the masses of the particles and inversely proportional to the square of the distance between them.”

To know more about force of gravity from the given link:

https://brainly.com/question/20548149

#SPJ4

Elasticity  is the property of a material to not change shape when squeezed.

Elasticity of the material is the property of a material that regain its shape after the material is stretched or compressed. This is an elastic force. whenever the material is compressed or we stretched it then the force called elastic force act on it. when the material is more stretched or more compressed than the more elastic force act on it. when we stretched the material its shape changes and when we leave it it will regain its shape.

Thus, Elasticity  is the property of a material to not change shape when squeezed.

To learn more about force here

https://brainly.com/question/2396709

#SPJ1

Air is composed of approximately 78% N₂, 21% O₂, and 1% percent other gases, the density of He at stp will be 0.1637 g/L

At standard, temperature, and pressure (STP) the values are:

Pressure (P) = 1 atm

Temperature (T) = 25 °C or 298.15 K

Density of helium (He) = ?

To calculate the density of He, we will use the modified form of ideal gas law as:

    PV = nRT

       n = number of moles

    n = m / M

Put the value of n in ideal gas law

    PV = mRT / M

    m / V = PM / RT

Where m = mass

    M = molarity

    V = volume

    P = pressure

    T = absolute temperature

    R = universal constant of gasses (value = 0.082 atm.L / mol.K)

As we know that:

    Density = m / V

Put density in place of m / V, the above equation will be:

   Density = PM / RT

Put the values:

    Density of Helium (He) = (1 atm) × (4.0026 g/mol) ÷ (0.082 atm.L/mol.K)(298.15 K)

    Density of Helium (He) = 0.1637 g/L

A ballon filled with He rises because the density of He is lower than air.

You can also learn about density from the following question:

https://brainly.com/question/15164682

#SPJ4

The NO3 is zero atm (atmospheric pressure at sea level).

What is partial pressure?

The pressure that one gas in a gas mixture will exert if it fills the same volume by itself is referred to as partial pressure.

What is spontaneous?

A spontaneous process is one that takes place without the use of external energy. For instance, a ball will roll down an incline, water will flow downward, ice will melt into water, radioactive elements will decay, and iron will rust.

N2O(g)+NO2(g)⇌3NO(g)

dG = G products-  G reactants

dG = 3*86.56696 - (104.1816 + 51.29584) = 104.22344 kJ/mol

since dG > 0, this must not favor produces, i.e. it is nonspontaneous

dG = -RT*ln(Kp)

Kp = exp(-dG/(RT))

Kp = exp(-104223.44/(8.314*298)) = 5.37818739*10^-19

Kp = NO^3 / (N2O)(NO2)

initially

NO= 0

N2O = 1

NO2 = 1

in equilibrium

NO= 0 + 3x

N2O = 1  -  x

NO2 = 1 - x

substitute

5.378 *10^-19 = (3x)^3 / (1-x)(1-x)

(5.378 *10^-19)(1 -2x +x^2)  = 27x^3

x = partially 0 atm

therefore

Almost no NO3 will be zero

Not possible, since

dG = dG º + RT*ln(Q)

therefore, even though we can decrease T, it will never be negative, meaning than this will be never spontaneous

Therefore, Almost no NO3 will be zero.

Learn more about partial pressures from the given link.

https://brainly.com/question/19813237

#SPJ4

The volume of the concentration of Ce3+ is x = 0.010548 mL

What is Cerium?

Cerium is a chemical element with symbol Ce and atomic number 58. Classified as a lanthanide, Cerium is a solid at room temperature.

The initial concentration of Ce4+ = 0.1758 mL

Volume  of the volumetric flask = 30 mL

After , dilution the Ce4+ = 500mL

0.1758 x 30 = x x 500

x = 0.1758 x 30 / 500

x = 0.010548 mL

To know more about Cerium from the given link

https://brainly.com/question/8869462

#SPJ4

The empirical formula of the given substance is CH2O.

A molecular formula is the smallest integer ratio of the atoms of an element in a compound. Therefore, to find the empirical formula, first find the number of moles of each element and then find the molar ratio. Therefore, the mass of carbon is 2.64 g, the mass of hydrogen is 0.444 g, and the mass of oxygen is 3.52 g. So, with the help of this information and the product table in question, the molar mass of carbon is 12.1 g per molar mass of hydrogen is 1.8 g per molar mass of oxygen, i.e. 16 g per mole. Now, let's find the molar ratio of carbon, hydrogen, and oxygen. As we know, the number of Mohrs is equal to the given mass divided by the molar mass. From this we can find the molar ratio of carbon, hydrogen and oxygen, which is the molar ratio of carbon equal to the mass of carbon divided by the molar mass of carbon.

So solving gives 0.22, and similarly 0.44 for hydrogen. 0.22 for oxygen. Therefore, we can divide the above molar ratio by 0.22. Since this is the smallest number, it is the ratio of 0.22 divided by 0.22, the ratio of 0.44 divided by 0.22, and the ratio of 0.22 divided by 0.22. Therefore, this value equals 1. This value is equal to 1. That is, the molecular formula contains one carbon atom, two hydrogen atoms, and one oxygen atom.

To know more about Molecular formula

https://brainly.com/question/28647690

#SPJ4

When comparing HClO and HBrO, HClO is a stronger acid than HBrO because it has more electronegative atoms.

When comparing H₂SO₄ and H₂SO₃, H₂SO₄ is a stronger acid because it has more oxygen atoms. As we know that the higher number of oxygen atoms in oxyacids increases the acidic strength of the acid.

When comparing HClO₂ and HClO, HClO₂ is a stronger acid because it has more oxygen atoms. As we know that the higher number of oxygen atoms in oxyacids, Increases the acidic strength of the acid.

When comparing HCLO and HBrO, HClO is a stronger acid because it has more electronegative atoms. As we know that the electronegativity of chlorine is higher than that of bromine.

When comparing CCl₃COOH and CH₃COOH, CCl₃COOH is a stronger acid because it has more electronegative atoms. As we know that the electronegativity of chlorine is higher than that of oxygen.

The complete question is attached as a picture.

You can also learn about electronegativity from the following question:

https://brainly.com/question/17762711

#SPJ4

Evidence did you see that indicated the liquid from copper II sulfate pentahydrate was water is color change to adding water to anhydrous copper II sulfate

Copper II sulphate also known as copper sulphate is an inorganic compound with the chemical formula CuSO₄ and when liquid from copper II sulfate pentahydrate was water then the color change from pale blue to white and change back to blue when water is added and the color change on adding water to anhydrous copper II sulphate has been used as test for the presence of water in a liquid

Know more about water

https://brainly.com/question/21927950

#SPJ4

Answer: bread baking in a oven and water evaporating in a puddle

Explanation:

A precipitate can be produced by the combination of lithium sulfide and nickel II chloride.

The term precipitate has to do with a solid product that is obtained from an aqueous phase reaction. It is important to know that in this kind of reaction, we have two aqueous phase reactants but they combine to give an insoluble product.

In this case we have to look at the possible products of each of the reactants as we have them in the question. The question that we must ask ourselves is; which of these aqueous reactants can produce a solid product?

Learn more about solid product:https://brainly.com/question/11902631

#SPJ1

If 17.4 kg of al2o3(s), 51.4 kg of NaOH(l), and 51.4 kg of HF (g) react completely. 89.95 kg of cryolite will be produced.

It is synthesized by fusion of sodium fluoride and aluminum fluoride as a electrolyte in the reduction of alumina to aluminum metal

Given data:

mass of Al = 17.4 kg = 17.4 × 10³

mass of NaOH = 51.4kg = 51.4 × 10³

mass of HF = 51.4kg = 51.4 × 10³

Molar mass of Al₂O₃ = 102 g/mol,

Molar mass of NaOH = 40g/mol

Molar mass of HF = 20g/mol

Reaction:

Al₂O₃ + 6 NaOH + 12 HF → 2 Na₂AlF₆ + 9H₂P

Moles of:

Mole/ stoichiometry of:

Al₂O₃ : 0.17 × 10³ / 1 = 0.17 × 10³

NaOH : 0.214 × 10³ / 6 = 0.035 × 10³

HF : 0.214× 10³ /12 = 0.017 × 10³

As the mole/ stoichiometric ratio is smallest for HF, it is the limiting reagent.

Molar mass of cryolite is 210gmol and HF is 20g/mol

12 mol of HF = 2 mol of Na₃AlF₆

240 g of HF = 420 g of Na₃AlF₆

51.4 × 10³g of HF    = (51.4 × 10³ × 420) / 240

                               = 89.95 × 10³ g or 89.95 kg of Na₃AlF₆

Hence, 89.95 kg of cryolite is produced.

Learn more about limiting reagent at https://brainly.com/question/23661051

#SPJ4

The transition n 2=∞ to n 1=2 emits radiation of the lowest wavelength. This transition corresponds to the maximum energy of emitted radiation.

What is emitted radiation?

When the excited electron transitions back to a lower electron orbital, emission takes place. The radiation that is emitted is known as luminescence. At energies equal to or lower than the energy corresponding to the absorbed radiation, luminescence can be seen. Following initial absorption, one of two pathways can lead to emission.

It is equal to the ionization energy and corresponds to the energy required when an electron is completely removed from the ground state of the hydrogen atom.

To learn more about emitted radiation click on the given link:

https://brainly.com/question/1578259

#SPJ4

One cubic centimeter of 7.15 g/cm³ will contain 9.2 x 10²² Cr atoms.

The density of Cr is 7.15 g/cm³.

It means, one cm³ contains 7.15 grams of Cr.

We know moles are given by,

n = mass/molar mass

n = number of atom/Avogadro number

Molar mass of Cr is 51 g/mol.

So, the number of atoms per cubic centimeter can be found as,

7.15/51 = Number of atom/6.603 x 10²³

Number of atoms = 9.2 x 10²²

So, one cubic centimeter will contain 9.2 x 10²² atoms of Cr.

To know more about Moles, visit,

https://brainly.com/question/15356425

#SPJ4

CIO- acts as the oxidizing agent from the given redox reaction

What is redox reaction?

What are oxidizing agent?

The oxidation state (number) of one of the element in oxidizing agent decreases.

The oxidation state of O atom = -2.

Oxidation state of Cl in ClO- :

x+(-2) = -1

x = +1

Oxidation state of Cl in Cl- = -1

Thus , the oxidation state of Cl decreases from +1 to -1 in the reaction.

So, the CIO- acts as the oxidizing agent.

learn more about oxidizing agent at https://brainly.com/question/1390694

#SPJ4

Note: The complete question is

You used NaOCl and Nal to generate I2 in situ. You probably noted this visually by observing the formation of a red-brown color as iodine was produced. The redox equation is:

2H+ (aq)+CIO- (aq)+2I− (aq)→Cl− (aq)+I2 (aq)+H2O(l)

What is acting as the oxidizing agent?

A 4.0 m solution of kno3 has a volume of 1.8 l. if the solution is diluted to 9.0 l, then the new concentration is  0.8 m

The concentration of solution of the amount of solute that has been dissolved in a given amount of solvent or solution

Here given data is

C₁ = 4.0 m

V₁ = 1.8 l

C₂ = ?

V₂ = 9.0 l

So the formula is

C₁V₁ = C₂V₂

4.0 m×1.8 l = C₂× 9.0 l

C₂ = 7.2/9.0 l

C₂ = 0.8 m

Know more about solution

https://brainly.com/question/27145111

#SPJ4

Mole fraction of nh3 in the solution is 11.33%.

What is mole?
The International System of Units uses the mole (symbol: mol) as the unit of substance amount (SI). How so many elementary entities of a particular substance are present in an object or sample is determined by the quantity of that substance. There are precisely 6.02214076×10^23 elementary entities in a mole.

NH3(g) + H2O(l) = NH4OH (aq)

The molar mass of NH3 is 17.031 g/mol.

The NH3:NH4OH mole ratio is 1: 1.

Mol of NH3 = 15 g/(17.031 g/mol) = 0.88 mol, which produces (1/1) x 0.88 mol of NH4OH = 0.88 mol of NH4OH/250 g of water.

The mass of the solution is calculated as 15g + 250 g = 265 g.

Given that the density of NH4OH is 0.974 g/mL, the resulting solution contains 0.88 mol of NH4OH/265 g: 0.974 g/mL or 0.88 mol/272.0739mL.

Then, mol of NH4OH in 100mL solution = (100mL/272.0739mL) x 0.88 mol = 0.3234 mol of NH4OH/100mL solution...

……. [A]

The molar mass of NH4OH is 35.04 g/mol.

As a result, the mass of NH4OH = 0.3234 mol x 35.04 g/mol = 11.33 g of NH4OH/100mL or 11.33% (m/v).

As stated in [A], one mol of NH4OH equals 0.3234mol/100mL solution or (1000mL/100mL) x 0.3234 mol equals 3.234 mol NH4OH/L or 3.234 M.

Because NH4OH is a monoprotic base, molarity equals normality, so the resulting solution's normality = 3.234 N rounded up to 3.23 N.

To learn more about mole
https://brainly.com/question/15356425
#SPJ4

Answer: The Answer is Steel

Explanation:

CH2 is  the empirical formula.

The simplest whole number ratio of each kind of atom in the compound serves as its empirical formula. It may be calculated using information on the mass of each component in a compound or the composition's percentage.

The number of atoms that make up a single molecule of a substance is specified by both the empirical formula and the molecular formula. Even if it doesn't usually happen, the empirical formula and molecular formula of a molecule may one day match. You must first ascertain the relative masses of the individual components in order to construct the empirical formula. Either mass data given in grams or composition% can be used.

To know more about  empirical formula visit : https://brainly.com/question/14044066

#SPJ9

11111111111111111111111111

We can conclude that each carbon atom in acetylene shares one pair of electrons with the hydrogen atom and three pairs with the other carbon atom.

A chemical bond is a long-lasting attraction between atoms or ions that allows molecules and crystals to form. Ionic bonds are formed by the electrostatic force between oppositely charged ions, whereas covalent bonds are formed by the sharing of electrons.

Each carbon atom in acetylene shares one pair of electrons with the hydrogen atom and three pairs with the other carbon atom.

The carbon atom contains four electrons. It requires four electrons to become stable in its outermost shell. Two carbon atoms covalently bond three pairs of electrons with each other in acetylene, and the remaining pair covalently bonds with two hydrogen atoms.

As a result of the carbon and hydrogen atoms becoming more stable, we can conclude that in acetylene, each carbon atom shares one pair of electrons with the hydrogen atom and three pairs with the other carbon atom.

To learn more about chemical bonding visit

brainly.com/question/15444131

#SPJ4

The following are :

(a) compound

(b) compound

(c) mixture

(d) mixture

In first one is red atom is bonded with one white atom and all the given are the same so this is an compound. in the second one the one red atom bonded with two white atom and all are the same this means this is also compound. the third one is one is bonded with same atom but it also have another atom bonded with same atom so this is a mixture. this kis exact same case in the  fourth one there mixture.

Thus, The following are :

(a) compound

(b) compound

(c) mixture

(d) mixture

To learn more about mixture and compounds here

https://brainly.com/question/5169457

#SPJ1

Answer:

9 for the first one

19 for the second

20 for the third

13 for the fourth

9 for the fifth

Two atoms of Hydrogen should be on the product side of the balanced equation.

Balancing the chemical equation is the branch of chemistry which helps us in balancing the atoms that are present on both the reactants and on the product sides.

Once all the individual elements are balanced, the total number of atoms of each element on the reactant and product side are compared once again. To make sure that there are no inequalities, then the  chemical equation is said to be balanced.

In the above given reactions we can see that in the reactant side there are 2 atoms of hydrogen in water molecule and in the product .

To know about balanced equation

https://brainly.com/question/21318666

#SPJ4