When the same type of arc is used in more than one place, what note is included with the dimension?

Answers

Answer 1

Answer:

Numerals

Dimensions

Extension Lines

Arrowheads

Dimension Figures

Isometric Dimensioning

Orthographic Dimensioning

If a drawing is to be complete, so that the object represented by the drawing can be made as intended by the designer, it must tell two complete stories. It tells this with views, which describe the shape of the object, and with dimensions and notes, which give sizes and other information needed to make the object.

Therefore, your next step is to learn the basics of dimensioning. In that way, you will understand not only how to interpret a drawing to get the information you need, but also how to dimension your sketches so that they can be used to communicate size information to others.

Numerals

It may seem a bit basic, but a few exercises with the shapes of numbers come before dimensioning. The reason for such a review is simply that incorrectly or carelessly made numbers on a drawing or sketch can easily be misinterpreted by someone on the job. That can be costly.

Therefore, the study of numbers forms is justified.

The number forms presented here have been determined to be the most legible, and are used by industry nationwide. The United States standardized 1/8” vertical

Explanation:

Answer 2

It is best to organize dimensions for easy reading. The drawing should have constant distances between dimension lines. If clarity cannot be achieved, avoid dimensioning inside objects or having the dimension line touch them.

What different notes in the dimension?

There are two categories of dimensions: size dimensions and location dimensions.

The measures for the size of features and objects are provided by size dimensions. To locate features and objects, location dimensions are utilized. Drawings may also contain notes.

A measurement is referred to as a Size Dimension if it represents an object's size. A measurement is referred to as a Location Dimension if it represents an object's location.

This method is known as the Unidirectional Method if the dimension is written in the same direction throughout the entire drawing.

Therefore, When the same type of arc is used in more than one place,  numerals  note is included with the dimension.

Learn more about dimension here:

https://brainly.com/question/28688567

#SPJ2


Related Questions

Whats the purpose of the keyway

Answers

Answer:

abrir candados y abrir puertas

Explanation:

Which Reynolds number would (most likely) correspond to a system where radial variations in velocity were negligible

Answers

Three different cases are computed to clarify the possible influence of the jet Reynolds number. The Reynolds number Re = V0e/ν is set to 3000 for case (I), 7500 for case (II) and 13500 for case (III). The nondimensional time step ΔtV0/e is fixed to a value which ensure the stability of the numerical scheme (CFL< 0.3). For the largest Reynolds number simulation (Re = 13500), we have to mention that only mean quantities are here reported since insufficient integration times are yet available for this case.
The length of the horizontal direction must be large enough to capture the two large recirculations on each side of jet and to limit the influence of the buffer domain inside of the domain of interest. Preliminary bidimensional simulations have been used to test the influence of the length of the horizontal direction. We concluded that a value of Hx/e = 40 is sufficient. In the framework of air curtain applications, the opening ratio is fixed to 10 for all cases. The choice of the length of the homogeneous direction (Oz) is less obvious. Indeed, the periodic boundary conditions along the homogeneous direction are justified only if the transverse dimension Hz is large enough to capture the largest structures of the flow. Consequently, the fluctuations must be practically decorrelated on a half-period (Hz/2). In the absence of two point correlations available in the literature for plane jets with short impingement distance, we considered successively two different transverse dimensions: Hz/e = π in accordance with the simulations of Hoffmann and Benocci (1994); Voke et al. (1995), then a double dimension Hz/e = 2π. Note that Cziesla et al. (2001) set the length of the homogeneous direction to 2. Beaubert and Viazzo (2001) note an overlapping problem on the transverse two-point correlations of the different velocity components in the plane of symmetry of the jet for the smallest width. Therefore, a width of 2π for the transverse direction is rather advised for the ratio Hy/e = 10 and in this range of Reynolds numbers. Table 1 contains the characteristics of the three simulations.

All of these are types of wheel alignments EXCEPT:
A) four-wheel.
B) steering angle.
C) two-wheel.
D) thrust angle.

Answers

Answer:

thrust angle

Explanation:

good luck.........

Technician A says that reversing the direction of refrigerant (as with a heat pump system) could be done to provide cabin heat. Technician B says that the amount of energy loss from the traditional drive belt and electric clutch A/C system is too high for hybrid and electric vehicles. Who is correct?

Answers

It can be noted that technician B is correct as amount of energy loss from the traditional drive belt and electric clutch A/C system is too high for hybrid and electric vehicles.

What is energy?

Energy simply means the property that is transferred to a body.

In this case, Technician A says that reversing the direction of refrigerant as with a heat pump system could be done to provide cabin heat. This is incorrect because this is done to remove heat.

Therefore, the correct person is technician B.

Learn more about energy on:

https://brainly.com/question/19665326


10.) A solid circular titanium control rod at 7,000 lb axial tension force where stress must not
exceed 42,000 psi. Assume that the modulus of elasticity of the titanium is 16,500,000 psi
and that the rod must elongate no more than 0.20 in. Determine (a) the minimum rod
diameter (precision 0.00) and (b) the maximum rod length (precision of 1).

Answers

The minimum rod diameter is 0.46 in and the maximum rod length is 78.6 in.

What is diameter?

Diameter is defined as the distance that runs through the center of a circle from one point to another on its surface. It can also be thought of as the circle's longest chord. The diameter of a sphere can be defined using either of the two methods.

Given tension axial force = 7000 lb

Maximum axial tensile strength = 42000 psi

σ = P /A = P / λ / 4 x d²

The minimum rod diameter  = 0.46

Elongation in rod = 0.2 in

                             = FL / AE

Maximum length of rod = 78.6 in

Thus, the minimum rod diameter is 0.46 in and the maximum rod length is 78.6 in.

To learn more about diameter, refer to the link below:

https://brainly.com/question/13624974

#SPJ1

Rear axles are usually lubricated by the same gear oil that lubricates the differential. True or false

Answers

Answer:

true

Explanation:

a a a a a a a a a a a a a a a a a a a a a a a a a a a a

Answers

Answer:

I agree

Explanation:

Answer:

AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA

funny question of no reason but k

Explanation:

It is given that 50 kg/sec of air at 288.2k is iesntropically compressed from 1 to 12 atm. Assuming a calorically perfect gas, determines the exit temperature and the compressor's input power.

Answers

The exit temperature is 586.18K and  compressor input power is 14973.53kW

Data;

Mass = 50kg/sT = 288.2KP1 = 1atmP2 = 12 atm

Exit Temperature

The exit temperature of the gas can be calculated isentropically as

[tex]\frac{T_2}{T_1} = (\frac{P_2}{P_1})^\frac{y-1}{y}\\ y = 1.4\\ C_p= 1.005 Kj/kg.K\\[/tex]

Let's substitute the values into the formula

[tex]\frac{T_2}{T_1} = (\frac{P_2}{P_1})^\frac{y-1}{y} \\\frac{T_2}{288.2} = (\frac{12}{1})^\frac{1.4-1}{1.4} \\ T_2 = 586.18K[/tex]

The exit temperature is 586.18K

The Compressor input power

The compressor input power is calculated as

[tex]P= mC_p(T_2-T_1)\\P = 50*1.005*(586.18-288.2)\\P= 14973.53kW[/tex]

The compressor input power is 14973.53kW

Learn more on exit temperature and compressor input power here;

https://brainly.com/question/16699941

https://brainly.com/question/10121263

What is the purpose of encryption?

Answers

Answer:

Encryption enhances the security of a message or file by scrambling the content. To encrypt a message, you need the right key, and you need the right key to decrypt it as well.It is the most effective way to hide communication via encoded information where the sender and the recipient hold the key to decipher data.

In python, how would I randomize numbers and insert them into a file?

Answers

Random integer values can be generated with the randint() function. This function takes two arguments: the start and the end of the range for the generated integer values. Random integers are generated within and including the start and end of range values, specifically in the interval [start, end].

Water flows through a horizontal branching pipe as shown
in Fig. P3.109. Determine the pressure at section (3).

Answers

The pressure of the water in section 3 of the horizontal pipe is -945 kPa.

Volumetric flow rate at equilibrium

The volumetric flow rate at equilibrium is given as flows;

mass in = mass out

[tex]Q_1 = Q_2 + Q_3[/tex]

where;

Q1 is the flow rate in section 1Q2 is the flow rate in section 2Q3 is the flow rate in section 3

Pressure of water in section 3

The pressure of water in section 3 of the horizontal pipe is calculated as follows;

[tex]F_2 + F_3 = F_1\\\\\frac{P_2}{A_2} + \frac{P_3}{A_3} = \frac{P_1}{A_1} \\\\\frac{350\ kPa}{0.02} + \frac{P_3}{0.07} = \frac{400 \ kPa}{0.1}\\\\\\frac{P_3}{0.07} = \frac{400 \ kPa}{0.1} - \frac{350\ kPa}{0.02} \\\\\frac{P_3}{0.07} = 4000 \ kPa/m^2 \ - \ 17,500 \ kPa/m^2\\\\\frac{P_3}{0.07} = -13,500 \ kPa/m^2 \\\\P_3 = 0.07 \ m^2 \ \ \times \ \ -13,500 \ kPa/m^2\\\\P_3 = -945 \ kPa[/tex]

Thus, the pressure of the water in section 3 of the horizontal pipe is -945 kPa.

Learn more about flow rate here: https://brainly.com/question/21630019

who ever answers this gets 25 NON COSTLY points

Answers

Answer:

"cool"

Explanation:

Determine the resultant R of the two forces applied to the bracket.

Write R in terms of unit vectors along the x- and y-axes shown.

Answers

The written form of R in terms of unit vectors along the x- and y-axes shown are; R Cos θ and R sin θ respectively.

Resolving forces along the x- and y-axes

Given that the force R, which is the resultant of the unit vectors given has magnitude R;

It follows that the resolved form of unit vector, R along the x- and y- axes is;

R(x) = R Cos θ

R(y) = R sin θ.

Where, angle measure, θ = angle subtended by the resultant force with the horizontal.

Read more on resultant force;

https://brainly.com/question/26491134

FD=CD*((P*(V^2)*A)/2)

Please solve for V

Answers

Answer:

The answer is V = √2FD ÷ CD × PA

Explanation:

FD = CD × PV²A ÷ 2

V² = 2FD ÷ CD × PA

V = √2FD ÷ CD × PA

Thus, The value of V is V = √2FD ÷ CD × PA

 

-TheUnknownScientist 72

two importance of
headlight alignment​

Answers

Answer:

Proper horizontal and vertical adjustments.

Explanation:

Proper horizontal and vertical adjustments will ensure that you can see far enough down the road to react to obstacles or avoid animals.

invent a machine that helps our environment to lessen plastics? draw and explain​

Answers

Answer: 1. Capturing fibers shed from tyres

The Tyre Collective start-up describes tyres as “the stealthy pollutant you never thought about.”

“It’s common knowledge that tyres wear down, but nobody seems to think about where it goes, and we were really shocked to discover that tyre particles are the second-largest microplastic pollution [after single-use plastics] in our oceans,” Hugo Richardson, one of co-founders of the company, said.

The particles from tyres also infuse into the air we breathe, making up to 50% of air particle emissions from road transport.

Explanation:

If you were to carve a wooden statue what tool would you use?

A: Chisel
B: Hand Saw
C: Hack Saw
D: Tin Snips

Answers

Answer:

You would have to use a chisel.

.Explanation:.

.

A chip carving knife and an assortment of palm gouges are all that is needed for creating small carvings in basswood or other soft woods. It is best to purchase individual chisels that you know you will be using. Unfortunately, sets of tools usually include several chisels in shapes that you may seldom use.

what is the meaning of ultrametric problem?


Answers

The large majority of optimization problems related to the inference of distance‐based trees used in phylogenetic analysis and classification is known to be intractable.

Which option explains the benefit of a newly designed fluid power system in the following scenario? A new fluid power rail system is being designed to travel across a large expanse of China. The new system will have a state-of-the-art hydraulic power system. The new fluid power system will have microstructures in the inner tubing to decrease friction and allow for more efficient dispersion of the fluid. The new fluid power system will have microstructures in the inner tubing to decrease friction and allow for more efficient dispersion of the fluid. The new fluid power system will have microstructures in the inner tubing to increase friction and allow for more efficient dispersion of the fluid. The new fluid power system will have microstructures in the inner tubing to increase friction and allow for more efficient dispersion of the fluid. The new fluid power system will have smooth surfaces to decrease friction and allow for more efficient dispersion of the fluid. The new fluid power system will have smooth surfaces to decrease friction and allow for more efficient dispersion of the fluid. The new fluid power system will have smooth surfaces to increase friction and allow for more efficient dispersion of the fluid.

Answers

Answer:

B

Explanation:

Answer:

The new fluid power system will have microstructures in the inner tubing to increase friction and allow for more efficient dispersion of the fluid.

Explanation:

Breaking on may cause a loss of control

Answers

Answer:

Is there supposed to be a picture...try asking question again

2. To read and understand electrical blueprints, you need to know
O A. the fundamentals of electrical engineering.
O B. how to sketch a plan view.
C. how buildings are constructed.
O D. the meaning of electric symbols.

Answers

Answer:

To read electrical blueprints one must understand the flow of the circuit, identify critical nodes, understand Ohm’s Law, [ and have a deep comprehension of the National Electrical Code. ]

Explanation:

Given: A=1, B=1, C=1 for a 3-input NOR gate, what is the output value?

Answers

Answer:

  0

Explanation:

A NOR gate gives you the inverted output of an OR function. In numerical terms, the OR function gives you the maximum of the inputs:

  A+B+C = max(A, B, C) = max(1, 1, 1) = 1

Then the output of the NOR function is its inverse:

  (A+B+C)' = (1 -max(A, B, C)) = 1 -1 = 0

The output value is 0.

A basic 3-input logic circuit has a LOW on one input and a HIGH on the other two inputs, and the output is LOW. What type of logic circuit is it

Answers

Answer:

  any of AND, NOR, XOR

Explanation:

An AND gate will give a Low output for any input Low. The logic circuit could be an AND gate.

A NOR gate will give a Low output for any input High. The logic circuit could be a NOR gate.

An XOR gate will give a Low output for an even number of High inputs. The logic circuit could be an XOR gate.

The logic circuit could be any of ...

  AND or NOR or XOR

__

Additional comment

What you consider a "basic" gate is not defined here. All of these are catalog items. If you consider only AND, OR, and NOT to be the basic gates, then your answer is AND.

How would I find the Voltage across the open circuit

Answers

Answer:

  Vab = 80V

Explanation:

The only current flowing in the circuit is supplied by the 100 V source. Its only load is the 40+60 ohm series circuit attached, so the current in that loop is (100V)/(40+60Ω) = 1A. That means V1 = (1A)(60Ω) = 60V.

Vab will be the sum of voltages around the right-side "loop" between terminals 'a' and 'b'. It is (working clockwise from terminal 'b') ...

  Vab = -10V +60V +(0A×10Ω) +30V

  Vab = 80V

A turbine engine compressor which contains vanes on one side of the impeller is a

1. Single entry centrifugal flow compressor
2. Single entry axial flow compressor
3. Double entry axial flow compressor
4. Double entry centrifugal compressor

Answers

The turbine engine described above is a Single-entry Centrifugal Compressor.

What is a Single-entry Centrifugal Compressor?

Also known as a Single-Stage Centrifugal compressor, this type of engine combines one impeller with an inlet guide vane that is associated and a diffuser.

It is used for increasing the kinetic energy of the gas with a high-speed impeller. This energy is then converted into heightened pressure within the diffuser. The correct answer, thus, is A.

In order words, they are used for compressing large volumes of gas into small pressures.

See the link below for more about turbine engines:

https://brainly.com/question/894340

The load is 200g and is 5' away from
the fulcrum, what is the mechanical
advantage and how many newtons of
force needed to lift the load?

Answers

Answer:

In 1st class levers, the fulcrum is always between the effort force and the load. It may or may not provide a mechanical advantage, depending on the location.

Explanation:

What hardware and peripherals are you using right now to take this course? What software and operating system (OS)? Describe the basic details of how the things you write for this course are sent through the internet, including the role of packets, an ISP, and a server.

Answers

An operating system brings powerful benefits to computer software and software development. Without an operating system, every application would need to include its own UI, as well as the comprehensive code needed to handle all low-level functionality of the underlying computer, such as disk storage, network interfaces and so on. Considering the vast array of underlying hardware available, this would vastly bloat the size of every application and make software development impractical.

Instead, many common tasks, such as sending a network packet or displaying text on a standard output device, such as a display, can be offloaded to system software that serves as an intermediary between the applications and the hardware. The system software provides a consistent and repeatable way for applications to interact with the hardware without the applications needing to know any details about the hardware.

The hardware that I am using to take this course is a Laptop computer running on windows operating system.

What are the basic details of how the things written for this course are sent through the internet, including the role of packets, an ISP, and a server.

When you send a query, like your previous message, your laptop's operating system breaks it into smaller units called packets. These packets contain parts of your message, destination address, and other metadata.

They're sent over the internet through your Internet Service Provider (ISP), which directs them through routers and switches. These network devices ensure packets take the most efficient path.

They reach the server where I'm hosted. The server processes your query, generates a response, divides it into packets, sends them back through the same process, and your laptop reassembles them to display my answer.

Learn more about hardware at:

https://brainly.com/question/24231393

#SPJ3

what is the difference between chemical engineering and medical engineering​

Answers

Explanation:

Medical engineering is narrowed to medicine and biology for healthcare including the development of medical treatments, applications or diagnostic technologies etc...

Answer:

A

tyler has a points card for a movie theater.

he receives 75 rewards points just for signing up.

• he earns 10.5 points for each visit to the movie theater.

he needs 180 points for a free movie ticket.

.

a

how many visits must tyler make to earn a free movie ticket?

Explanation:

) How much dry salt must be added in 150 kg of aqueous salt solution in order to

increase its concentration from 15% to 40%? (10 Marks.​

Answers

To archive a concentration of 40%, you need to add 62.5 kg of salt.

How much salt must we add?

First, we have 150kg of aqueous salt solution with a concentration of the 15%, which means that the 15% of 150kg is salt, so we have:

0.15*150kg = 22.5 kg of salt.

Now we want to add a quantity M of salt, such that the new concentration of salt is of 40%.

The new mass of the mixture will be:

150kg + M

The new mass of salt will be:

22.5kg + M

The concentration of salt, in decimal form, will be:

(22.5kg + M)/(150kg + M)

The above quotient must be equal to 0.4 (40% in decimal form), then we solve:

(22.5kg + M)/(150kg + M) = 0.4

(22.5kg + M) = 0.4*(150kg + M)

(22.5kg + M) = 60kg + 0.4*M

M - 0.4*M = 60kg - 22.5kg

0.6*M = 37.5kg

M = (37.5 kg)/0.6 = 62.5kg

So you need to add 62.5kg of salt.

If you want to learn more about concentrations, you can read:

https://brainly.in/question/14278665

Drag the tiles to the correct boxes to complete the pairs.
Match the type of manufacturing system to its description.
agile manufacturing system
assembly line production system
lean manufacturing system
mass production system
focuses on manufacturing large and
continuous product runs.
arrowRight
focuses on the reduction of waste in the
manufacturing process
arrowRight
focuses on the ability to adapt to
customer and market changes
arrowRight
focuses on improving worker efficiency
by making tasks short and repetitive
arrowRight

Answers

The correct matching would be:

Mass production system -> focuses on manufacturing large and continuous product runs.

The other matching pairs

Lean manufacturing system -> focuses on the reduction of waste in the manufacturing process.

Agile manufacturing system -> focuses on the ability to adapt to customer and market changes.

Assembly line production system -> focuses on improving worker efficiency by making tasks short and repetitive.

The mass production system emphasizes the production of a high volume of products in a consistent manner. The lean manufacturing system has the objective of minimizing or eliminating waste.

The agile manufacturing system places great importance on accommodating alterations from customers and the market. The assembly line manufacturing technique enhances worker productivity by assigning brief and repetitive tasks.

Read more about mass production system here:

https://brainly.com/question/8689792

#SPJ1

Other Questions
Can you help solve problem 11 Eighty percent of a roof, or 2800 square feet of the roof, has been re-shingled. What is the total area of the roof?. HELP EXPLAIN TY subjuntivo Select the correct answer from each drop-down menu.The --- was signed into law by President Lyndon B. Johnson in 1964. This act made ----- illegal. It also ----discrimination in the workplace and in public places. Many feel this act was the most significant ---- in civil rights since the Fourteenth Amendment. We know line segment BD is parallel to line segment AE. Which of the following statements must also be true (select two choices) Found on the island of Kilauea, earthquakes can sometimes be triggered by the subsurface movement of 10) The ratio of boys to girls in Mrs. Ronilo's math class is 3 to 1. What PERCENT of the class is girls Someone please help offering 25 points All of the following are true of the Great Compromise except All of the following are true of the Great Compromise except Question 2 options: the Three-Fifths Compromise did not end slavery. it did not directly address the abolition of slavery. the representatives elected in the South did not represent slaves and their interests. the Three-Fifths Compromise allowed the immediate ban on the importation of slaves. it established the Senate in which individual states were equally represented. When an object falls due to gravity on Earth, the acceleration is 9.8 m/s. A student drops a rockdown a mineshaft. It takes 3.00 seconds for the rock to hit the bottom of the shaft. What is thevelocity of the rock as it impacts? The diagram shows the process of photosynthesis. Which part represents an autotroph? Your boss has tasked you with writing a company story that will help make them stand out from their competitors. Keeping this in mind, whats the most effective question you should start with? plz help me someone plz how many moles are present in 132.7 grams of Cu Can someone explain this to me please? In this activity, you'll write a two-paragraph analysis about which of two artists Dante would have chosen to illustrate the Inferno. You'll choose two Inferno illustrations by each artist as well as selections from the text as evidence to support your analysis.The following pages and your writing guide will help you. Be sure to fill in all the questions in your writing guide; by doing so, you'll have a draft of your assignment by the end of this activity. You see a volcano with relatively steep sides and sticky lava that does not flow easily. It produces explosive eruptions due to gas building up in the viscous magma. What type of volcano is this? Claim: Evidence: Reasoning: You see a volcano which produces low viscosity, runny lava, it spreads far from the source and forms a volcano with gentle slopes. It is formed by thick lava that flows slowly and is not explosive. What type of volcano is this? Use the sentence starters from the previous slides: Claim: Evidence: Reasoning: 5. A girl walks north 750 m in 10 minutes. What is her velocity? 10. Jan purchased 140 shares of stock in the ABC Company at a price of $18.75 per share. During thenext three days, the value declined by $1.00, $1.75 and $1.50. What was the value of a share of ABCstock at the end of three days? What does Clint Smith say the beauty of the law is?