For (29) A reaction is spontaneous at all temperatures with negative ΔH and a positive ΔS. (option a); (30) For the given reaction, ΔS is positive (option a).
29) For a reaction to be spontaneous, ΔG should be negative.
The free energy change, ΔG is related to the change in enthalpy, ΔH and the change in entropy, ΔS through the relation : ΔG = ΔH - TΔSΔG is negative when the reaction is spontaneous, so : ΔH should be negative and ΔS should be positive.
Therefore, the answer is a. negative ΔH and a positive ΔS.
30) The standard molar entropy of oxygen is greater than that of magnesium, and the reaction produces a solid product (MgO). Therefore, the entropy increases when the reactants are converted to products. As a result, ΔS is positive. Therefore, the answer is Positive (+).
Thus, for (29) A reaction with a is spontaneous at all temperatures with negative ΔH and a positive ΔS. (option a); (30) For the reaction, ΔS is positive (option a).
To learn more about entropy :
https://brainly.com/question/30402427
#SPJ11
A powder alloy of the composition 9wt.% Al, 3wt.% Ni and 88wt.% Mg will be subjected to a sintering process in Argon atmosphere, in 610 degrees Celsius for 120 minutes and a heating rate of 5 degrees Celsius/minutes. Calculate the Gibbs free energy of the system (which reaction is favorable, because we do not want brittle phases like Ni-Al which is a very stable phase but brittle so we do not want this phase, and other brittle phases because afterwards we want to metalwork the material (rolling) so we want it to be still metallic = ductile). Could we lower the temperature to get a more ductile result?
To calculate the Gibbs free energy of the system and assess the favorability of reactions, we need to know the phase diagram and thermodynamic data of the alloy system at the given composition range.
Unfortunately, without specific phase diagram information and thermodynamic data, it is not possible to determine the Gibbs free energy and the favorability of reactions accurately. However, the goal of avoiding brittle phases like Ni-Al can be achieved by adjusting the alloy composition or the sintering conditions. By modifying the composition, it may be possible to shift the phase equilibrium towards more desirable phases. Alternatively, adjusting the sintering conditions, such as temperature, time, and atmosphere, can also influence the formation and stability of specific phases. Lowering the sintering temperature might reduce the likelihood of forming brittle phases, as it can affect the diffusion and reaction kinetics during the sintering process.
However, the specific temperature needed for achieving a more ductile result would depend on the alloy composition and the desired phase stability. It is recommended to consult phase diagrams and conduct experimental analysis to optimize the sintering conditions for obtaining a more ductile material.
To learn more about Gibbs click here: brainly.com/question/29753420
#SPJ11
1.2. Give the IUPAC names of each of the following di-substituted benzene compounds and also assign the substituents as either (Para (p), Ortho(o) or Meta(m)). (5) NO₂ 1.2.1 Br SO3H 1.2.2 OH 1.2.3 1
1.2.1: 1,4-Dinitrobenzene (p), 1.2.2: 2-Bromobenzenesulfonic acid (m), 1.2.3: 1-Hydroxy-2-methylbenzene (o)
1.2.1: The compound with the substituent NO2 is named 1,4-dinitrobenzene. In this compound, the two nitro groups (-NO2) are located at the para positions, which are positions 1 and 4 on the benzene ring.
1.2.2: The compound with the substituent Br and SO3H is named 2-bromobenzenesulfonic acid. In this compound, the bromine atom (-Br) is located at the ortho position, which is position 2 on the benzene ring, while the sulfonic acid group (-SO3H) is located at the meta position, which is position 1 on the benzene ring.
1.2.3: The compound with the substituent OH is named 1-hydroxy-2-methylbenzene. In this compound, the hydroxy group (-OH) is located at the ortho position, which is position 1 on the benzene ring, and the methyl group (-CH3) is located at the meta position, which is position 2 on the benzene ring.
The IUPAC names of the di-substituted benzene compounds are 1,4-dinitrobenzene, 2-bromobenzenesulfonic acid, and 1-hydroxy-2-methylbenzene. The substituents on each compound are assigned as para (p), meta (m), and ortho (o) based on their positions on the benzene ring. It is important to accurately name and assign substituents in organic compounds to communicate their structures and understand their properties and reactivities.
To know more about Dinitrobenzene , visit;
https://brainly.com/question/32676396
#SPJ11
When mixing 5.0 moles of HZ acid with water up to complete a volume of 10.0 L, it is found that at
reach equilibrium, 8.7% of the acid has become hydronium. Calculate Ka for HZ. (Note: Do not assume is disposable. )a. 1.7×10^−3
b. 9.5×10^−2
C. 2.0×10^−2
d. 4.1×10^−3
e. 3.8×10^−3
f. 5.0×10^−1
therefore the correct option is d) 4.1×10⁻³.
Given that the initial concentration of HZ is 5.0 moles and at equilibrium, 8.7% of the acid has become hydronium.
The concentration of HZ that has not reacted is (100% - 8.7%) = 91.3%.
The final concentration of HZ is 5.0 × 0.913 = 4.565 moles.
The final concentration of the hydronium ion is 5.0 × 0.087 = 0.435 M.HZ ⇌ H+ + Z-Ka
= [H+][Z]/[HZ]Ka
= [H+][Z]/[HZ]
= [0.435]² / 4.565
= 0.041
Which is the same as 4.1 × 10-3.
We know that HZ is an acid that will partially ionize in water to give H+ and Z-.
The chemical equation for this reaction can be written as HZ ⇌ H+ + Z-.
The acid dissociation constant (Ka) of HZ is the equilibrium constant for the reaction in which HZ ionizes to form H+ and Z-.Thus, Ka = [H+][Z]/[HZ].
The given problem is a typical example of the dissociation of a weak acid in water. We are given the initial concentration of HZ and the concentration of hydronium ions at equilibrium.
To find the equilibrium concentration of HZ, we can use the fact that the total amount of acid is conserved.
At equilibrium, 8.7% of HZ has dissociated to give hydronium ions.
This means that 91.3% of the original HZ remains unreacted.
Therefore, the concentration of HZ at equilibrium is 5.0 × 0.913 = 4.565 M.
The concentration of hydronium ions at equilibrium is 5.0 × 0.087 = 0.435 M.
Using the equation Ka = [H+][Z]/[HZ], we can substitute the values of the concentrations and the equilibrium constant into the equation and solve for Ka.
Ka = [H+][Z]/[HZ]
= [0.435]² / 4.565
= 0.041 or 4.1 × 10-3.
The answer is d) 4.1 × 10-3.
To know more about hydronium visit:
https://brainly.com/question/14619642
#SPJ11
A thin layer of radioactive copper is deposited onto the end of a long copper bar and the sample is annealed at fixed temperature for 10 h. The bar is then cut into 1 mm thick disks perpendicular to the diffusion direction and the quantity of radioactive copper in each is measured using a device similar to a Geiger counter. The detector measured It counts/(min m²) and I2 = 500 counts/(min m²) for disks taken from x₁ = mm from the end of the bar. Calculate the self-diffusivity (D) of copper assuming that the count rate is proportional to the concentration of the radioactive isotope. (Hint: infinite source 5000 diffusion follows) 100 mm and x2 = 400 c(x, t) = -²/4Dt 9 2√√RDI
The self-diffusivity (D) of copper can be calculated by using the given data and the equation c(x, t) = (x²/4Dt) * (√(R/D) - 1).
The equation c(x, t) = (x²/4Dt) * (√(R/D) - 1) relates the concentration of the radioactive isotope of copper (c) at a distance (x) from the end of the bar to the self-diffusivity (D) of copper and the annealing time (t).
I₁ = It counts/(min m²)
= 500 counts/(min m²)
I₂ = 500 counts/(min m²)
x₁ = mm
x₂ = 400 mm
t = 10 hours
= 600 minutes
We can use the given equation with the measured counts (I₁ and I₂) to calculate the ratio R/D.
R/D = (I₂/I₁)²
Substituting the values:
R/D = (500/500)²
= 1
We may now rearrange the equation to find D:
D = (x²/4ct) * (√(R/D) - 1)
Substituting the known values:
D = (x₁²/4ct) * (√(1/D) - 1)
= (x₁²/4ct) * (√(1/D) - 1)
Substituting the given values:
x₁ = mm
= 0.001 m
t = 10 hours
= 600 minutes
D = (0.001²/4 * 0.001 * 600) * (√(1/D) - 1)
= 1.6667 * (√(1/D) - 1)
To determine the value of D, we can numerically solve this equation. By substituting different values for D and iterating until the equation is satisfied, we can determine the self-diffusivity of copper.
To know more about Copper, visit
brainly.com/question/24540382
#SPJ11
Outside air at 35°C and 70% relative humidity will be conditioned by cooling and heating so that
bring the air to a temperature of 20C and a relative humidity of 45%. Using a psychrometric chart, estimate:
a. plot of required air conditioning process (Must be collected with answer sheet!)
b. the amount of water vapor removed,
c. heat removed,
d. added heat.
To condition the air from 35°C and 70% relative humidity to 20°C and 45% relative humidity, several factors need to be considered. The psychrometric chart is a valuable tool for understanding and analyzing the properties of moist air, such as temperature, humidity, and enthalpy.
a. The plot of the required air conditioning process on the psychrometric chart would show the initial point representing the outside air conditions at 35°C and 70% relative humidity. From there, the process would involve cooling the air to reach the desired temperature of 20°C while reducing the relative humidity to 45%.
b. The amount of water vapor removed can be determined by comparing the initial and final states on the psychrometric chart. It represents the difference in the moisture content (specific humidity) between the two points.
c. The heat removed during the cooling process can be calculated using the formula: Heat removed = mass flow rate of air * specific heat of air * temperature difference.
d. The added heat during the heating process would depend on the desired final temperature of 20°C, the specific heat of air, and the mass flow rate of air. It can be calculated using the formula: Added heat = mass flow rate of air * specific heat of air * temperature difference.
By performing these calculations, one can estimate the amount of water vapor removed, the heat removed, and the added heat necessary to condition the air to the desired conditions.
know more about specific humidity :brainly.com/question/20490622
#SPJ11
Which should be removed to let the crops grow
Used as a physical barrier, crop covers can be highly effective in excluding pests. Insect-proof meshesare a variant of crop covers that give protection against insects often without significant increases in temperature but good protection against wind and hail.
Oxygen is transferred from the inside of the lung through the lung tissue to blood vessels. Assume the lung tissue to be a plane wall of thickness L and that inhalation maintains a constant oxygen mol
The transfer of oxygen from the inside of the lung through the lung tissue to blood vessels can be modeled using Fick's first law of diffusion. The rate of oxygen transfer depends on factors such as the diffusion coefficient, area, concentration difference, and thickness of the lung tissue.
Fick's first law of diffusion states that the rate of diffusion of a gas across a plane wall is proportional to the area, concentration difference, and inversely proportional to the thickness of the wall.
Mathematically, the equation can be expressed as:
Rate of Diffusion = (Diffusion Coefficient * Area * Concentration Difference) / Thickness
In this case, the thickness of the lung tissue is denoted as L. The concentration difference represents the difference in oxygen concentration between the inside of the lung and the blood vessels. The diffusion coefficient is a measure of how easily oxygen can diffuse through the lung tissue.
To calculate the rate of oxygen transfer, the diffusion coefficient and the concentration difference would need to be determined experimentally or based on relevant literature values specific to the lung tissue and oxygen diffusion.
The transfer of oxygen from the inside of the lung through the lung tissue to blood vessels can be analyzed using Fick's first law of diffusion. The rate of oxygen transfer depends on factors such as the diffusion coefficient, area, concentration difference, and thickness of the lung tissue.
To know more about oxygen visit:
https://brainly.com/question/33311650
#SPJ11
4. A fluidized-bed, immobilized-cell bioreactor is used for the conversion of glucose to ethanol by Z.mobilis cells immobilized in K-carrageenan gel beads. The dimensions of the bed are 10cm (diameter) by 200 cm. Since the reactor is fed from the bottom of the column and because of CO₂ gas evolution, cell concentrations decrease with the height of the column. The average cell concentration at the bottom of the column is [X]. = 45g/L and the average cell concentration decreases with the column height according to the following equation: X=X, (1-0.005Z) where Z is the column height (cm). The specific rate of substrate consumption is q=2 g substrate /g cells h. The feed flow rate and glucose concentration in the feed are 5L/h and 160 g glucose/L, respectively. a) determine the substrate concentration in the effluent b) Determine the ethanol concentration in the effluent if Yp/s =0.48 g eth/g glu.
a) The substrate concentration in the effluent is not meaningful or possible under the given conditions.
b) The ethanol concentration in the effluent is 216 g/L.
a) To determine the substrate concentration in the effluent, we need to consider the substrate consumption by the cells along the column height.
Given:
Feed flow rate (Q) = 5 L/h
Glucose concentration in the feed (Cglu) = 160 g/L
Specific rate of substrate consumption (q) = 2 g substrate/g cells h
Column height (Z) = 200 cm
Initial cell concentration at the bottom of the column ([X]₀) = 45 g/L
The substrate consumption can be calculated using the specific rate of substrate consumption and the cell concentration at each height:
Substrate consumption rate (Rglu) = q * X
The substrate concentration in the effluent can be determined by subtracting the substrate consumption rate from the feed concentration:
Substrate concentration in the effluent (Cglu_effluent) = Cglu - (Rglu * Q)
Now, let's calculate the substrate concentration in the effluent:
At the bottom of the column (Z = 0 cm):
Rglu₀ = q * [X]₀ = 2 g substrate/g cells h * 45 g/L = 90 g substrate/L h
Cglu_effluent = Cglu - (Rglu₀ * Q)
= 160 g/L - (90 g substrate/L h * 5 L/h)
= 160 g/L - 450 g substrate/L
= -290 g substrate/L
Since the calculated value is negative, it suggests that the substrate concentration in the effluent is not meaningful or possible under the given conditions.
b) To determine the ethanol concentration in the effluent, we need to use the yield coefficient (Yp/s).
Given:
Yield coefficient (Yp/s) = 0.48 g eth/g glu
Ethanol production rate (Reth) = Yp/s * Rglu
The ethanol concentration in the effluent can be calculated as:
Ethanol concentration in the effluent (Ceth_effluent) = Reth * Q
Let's calculate the ethanol concentration in the effluent:
Reth = Yp/s * Rglu₀ = 0.48 g eth/g glu * 90 g substrate/L h = 43.2 g eth/L h
Ceth_effluent = Reth * Q = 43.2 g eth/L h * 5 L/h = 216 g eth/L
Therefore, the ethanol concentration in the effluent is 216 g/L.
Read more on consumption rate here: https://brainly.com/question/29588843
#SPJ11
Q1. Explain how the nuclei on either side of the line of stability tend to come closer to it using beta decay as the mechanism. Q2. Explain the concepts of radioactive equilibrium and secular equilibrium.
1. Nuclei on either side of the line of stability become more stable by undergoing beta decay. Beta decay involves the emission or capture of an electron or positron, resulting in a change in the neutron-to-proton ratio. This process moves the nucleus closer to the line of stability.
2. Radioactive equilibrium occurs when the production and decay rates of a radioactive isotope are equal, resulting in constant concentrations of the parent and daughter isotopes. Secular equilibrium is a specific type of radioactive equilibrium where the parent isotope has a much longer half-life than its daughter isotopes. In secular equilibrium, the parent decays at a slower rate, and the concentrations of parent and daughter isotopes reach a quasi-steady state.
1. In nuclear physics, the line of stability represents the stable nuclei that exist in nature. Nuclei that are located on either side of the line of stability tend to undergo radioactive decay in order to become more stable. Beta decay is one of the mechanisms by which nuclei can move closer to the line of stability.
Beta decay involves the transformation of a nucleus by either emitting or capturing an electron (beta minus decay) or a positron (beta plus decay). Let's focus on beta minus decay as an example. In this process, a neutron within the nucleus is transformed into a proton, and an electron (beta particle) and an antineutrino are emitted.
By undergoing beta minus decay, the nucleus gains a proton, which increases the atomic number by one. As a result, the nucleus moves one step closer to the line of stability. The number of neutrons decreases, while the number of protons increases, leading to a more stable configuration.
The emitted electron carries away excess energy from the decay process, thereby reducing the overall energy of the nucleus. As the nucleus approaches the line of stability, it tends to become more stable due to the decrease in the neutron-to-proton ratio, which is a key factor in determining nuclear stability.
2. Radioactive equilibrium and secular equilibrium are concepts related to the decay of radioactive substances.
Radioactive equilibrium refers to a situation in which the rate of production of a particular radioactive isotope is equal to the rate of its decay. This occurs when the parent isotope decays into a series of daughter isotopes until a stable end product is reached. The time it takes for a radioactive substance to reach equilibrium depends on the half-life of the parent isotope and the half-lives of its daughter isotopes. Once equilibrium is achieved, the concentrations of the parent and daughter isotopes remain constant over time.
Secular equilibrium, on the other hand, is a special case of radioactive equilibrium that occurs when the half-life of the parent isotope is much longer than the half-lives of its daughter isotopes. In secular equilibrium, the parent isotope decays at a much slower rate compared to its daughter isotopes. As a result, the production rate of the parent isotope is negligible compared to its decay rate, and the concentrations of the parent and daughter isotopes reach a quasi-steady state. In this case, the daughter isotopes are said to be in secular equilibrium with the parent.
Secular equilibrium is typically observed in radioactive decay chains where the half-life of the initial parent isotope is extremely long compared to the subsequent decay products. This equilibrium state allows for simplified calculations and analysis of radioactive decay processes, as the concentration of the parent isotope can be assumed to be constant over time.
Read more on Radioactive equilibrium here: https://brainly.com/question/9932896
#SPJ11
6. Calculate the potential for each half cell and the total emf of the cell (Ecell) at 25°C: Pb|Pb²+ (0.0010 M)/Pt, Cl₂(1 atm)/ Cl(0.10 M) E° Pb=Pb²+/Pb° = -0.13 V 2+ E° (Cl₂-Cl) = 1.358 V 7
The potential for the half cell Pb|Pb²+ (0.0010 M)/Pt is -0.13 V, and the potential for the half cell Cl₂(1 atm)/Cl(0.10 M) is 1.358 V. The total emf of the cell (Ecell) at 25°C can be calculated by subtracting the potential of the anode from the potential of the cathode.
The potentials for each half cell are given as -0.13 V for Pb|Pb²+ (0.0010 M)/Pt and 1.358 V for Cl₂(1 atm)/Cl(0.10 M). These potentials represent the standard reduction potentials (E°) at 25°C.
1. Calculate the total emf (Ecell): The total emf of the cell (Ecell) can be determined by subtracting the potential of the anode from the potential of the cathode. In this case, we have Pb|Pb²+ (0.0010 M)/Pt as the anode and Cl₂(1 atm)/Cl(0.10 M) as the cathode.
Ecell = E° (Cl₂-Cl) - E° Pb²+/Pb°
= 1.358 V - (-0.13 V)
= 1.488 V
Therefore, the total emf (Ecell) of the cell at 25°C is 1.488 V.
the potential for the half cell Pb|Pb²+ (0.0010 M)/Pt is -0.13 V, and the potential for the half cell Cl₂(1 atm)/Cl(0.10 M) is 1.358 V. By subtracting the potential of the anode from the potential of the cathode, the total emf (Ecell) of the cell at 25°C is found to be 1.488 V.
Learn more about cathode : brainly.com/question/11920555
#SPJ11
help me answer this.
a. Balancing the redox reaction in both acidic and basic mediums:
Fe²+ + [tex]MnO_4[/tex]- --> Fe³+ + Mn²+.
b. Balancing the redox reaction in both acidic and basic mediums:
Cu + [tex]NO_3[/tex]- --> Cu+2 +[tex]N_2O_4.[/tex]
a. Fe²+ + [tex]MnO_4[/tex]- --> Fe³+ + Mn²+
Balanced equation in acidic medium:
Fe²+ + [tex]MnO_4[/tex]- --> Fe³+ + Mn²+
To balance the equation, we can follow these steps:
1)Assign oxidation numbers to each element:
Fe²+ (Fe has a +2 oxidation state)
[tex]MnO_4[/tex]- (Mn has a +7 oxidation state)
2)Identify the element being reduced and the element being oxidized:
Fe²+ is being oxidized (from +2 to +3)
[tex]MnO_4[/tex]- is being reduced (from +7 to +2)
3)Balance the atoms and charges for each half-reaction:
Oxidation half-reaction: Fe²+ --> Fe³+ (requires one Fe²+ and one electron)
Reduction half-reaction:[tex]MnO_4[/tex]- --> Mn²+ (requires five electrons and eight H+ ions to balance charges)
4)Balance the number of electrons in both half-reactions:
Multiply the oxidation half-reaction by 5 and the reduction half-reaction by 1 to equalize the number of electrons in both half-reactions.
The balanced equation in acidic medium is:
5Fe²+ + [tex]MnO_4[/tex]- + 8H+ --> 5Fe³+ + Mn²+ + 4H2O
Balanced equation in basic medium:
To balance the equation in a basic medium, we need to add OH- ions to both sides to neutralize the H+ ions.
The balanced equation in basic medium is:
5Fe²+ + [tex]MnO_4[/tex]- + 8OH- --> 5Fe³+ + Mn²+ + 4[tex]H_2O[/tex]
Overall charge balancing:
In both acidic and basic media, the overall charges are balanced, with an equal number of positive and negative charges on both sides of the equations.
b. Cu + [tex]NO_3[/tex]- --> Cu+2 + N₂O4
Balanced equation in acidic medium:
Cu + [tex]NO_3[/tex]- --> Cu+2 + N₂O4
To balance the equation, we can follow these steps:
1)Assign oxidation numbers to each element:
Cu (Cu has a 0 oxidation state)
[tex]NO_3[/tex]- (N has a +5 oxidation state)
2)Identify the element being reduced and the element being oxidized:
Cu is being oxidized (from 0 to +2)
[tex]NO_3[/tex]- is being reduced (from +5 to +4)
3)Balance the atoms and charges for each half-reaction:
Oxidation half-reaction: Cu --> Cu+2 (requires two electrons)
Reduction half-reaction: [tex]NO_3[/tex]- --> N₂O4 (requires three electrons)
4)Balance the number of electrons in both half-reactions:
Multiply the oxidation half-reaction by 3 and the reduction half-reaction by 2 to equalize the number of electrons in both half-reactions.
The balanced equation in acidic medium is:
3Cu + 2[tex]NO_3[/tex]- --> 3Cu+2 + N₂O4
Balanced equation in basic medium:
To balance the equation in a basic medium, we need to add OH- ions to both sides to neutralize the H+ ions.
The balanced equation in basic medium is:
3Cu + 2[tex]NO_3[/tex]- + 6OH- --> 3Cu+2 + N₂O4+ 3[tex]H_2O[/tex]
Overall charge balancing:
In both acidic and basic media, the overall charges are balanced, with an equal number of positive and negative charges on both sides of the equations
The complete question is :
Balance the following redox reactions in both acidic and basic medium using the ion-electron method.
Rubrics:
1pt balanced equation acidic medium.
1pt balanced equation basic medium.
1pt balance overall charges of acid and basic medium.
a. Fe²+ + [tex]MnO_4[/tex]- --> Fe³+ + Mn²+
b. Cu + [tex]NO_3[/tex] --> Cu +2 + N₂O4
Know more about acidic medium here:
https://brainly.com/question/24255408
#SPJ8
Use the References to access important values if needed for this question. Enter electrons as e-.
A voltaic cell is constructed from a standard Pb2+|Pb Half cell (E° red = -0.126V) and a standard F2|F- half cell (E° red = 2.870V). (Use the lowest possible coefficients. Be sure to specify states such as (aq) or (s). If a box is not needed, leave it blank.)
The anode reaction is:___________
The cathode reaction is:__________
The spontaneous cell reaction is:__________
The cell voltage is ___________V
We know the standard reduction potentials of the half-cells involved, so we can find the cell voltage and the spontaneous reaction. Thus;
The anode reaction is:
Pb(s) → Pb2+(aq) + 2e-
This is the oxidation half-reaction that occurs in the Pb half-cell.
The cathode reaction is:F2(g) + 2e- → 2F-(aq).
This is the reduction half-reaction that occurs in the F2 half-cell.
The spontaneous cell reaction is
:Pb(s) + F2(g) → Pb2+(aq) + 2F-(aq).
This is the combination of the oxidation and reduction half-reactions, with the electrons canceled out from both sides.
The cell voltage is 2.996 V The standard cell potential is calculated as follows:
standard cell potential = E°(reduction) - E°(oxidation)standard cell potential = 2.870 V - (-0.126 V)standard cell potential = 2.996 V, The cell voltage is positive, indicating that the reaction is spontaneous.
To know more about oxidation half-reaction visit;
https://brainly.com/question/12686471
#SPJ11
A 100 m storage tank with fuel gases is at 20°C, 100 kPa containing a mixture of acetylene C2H2, propane CzHg and butane C4H10. A test shows the partial pressure of the C,H, is 15 kPa and that of CzH, is 65 kPa. How much mass is there of each component?
The mass of acetylene, propane, and butane in the mixture are 0.018 g, 1.57 g, and 0.45 g respectively.
We are given a mixture of three gases which can be considered as an ideal gas mixture. The partial pressure of acetylene is given to be 15 kPa. Therefore the partial pressure of propane and butane would be the remaining pressure i.e (100 - 15 - 65 = 20 kPa)
Step 1: Calculate the mole fraction of each component
Mole fraction of acetylene = 15 kPa / 100 kPa = 0.15
Mole fraction of propane = 65 kPa / 100 kPa = 0.65
Mole fraction of butane = 20 kPa / 100 kPa = 0.20
Total mole fraction, x_total = 0.15 + 0.65 + 0.20 = 1
Step 2: Calculate the number of moles of each component
The total number of moles of the mixture = n_total = P.V / R.T
Let's consider 1 mole of the mixture.
Pressure of the mixture = 100 kPa
Temperature of the mixture = 20 °C
Volume occupied by 1 mole of the mixture = V = 0.100 m³
Gas constant = R = 8.31 J/K-mol
Total number of moles = n_total = (100 kPa x 0.100 m³) / (8.31 J/K-mol x (273 + 20) K) = 0.04415 mol
Step 3: Calculate the mass of each component
Molar mass of C2H2 = 2 x 12.01 g/mol + 2 x 1.008 g/mol = 26.04 g/mol
Molar mass of C3H8 = 3 x 12.01 g/mol + 8 x 1.008 g/mol = 44.1 g/mol
Molar mass of C4H10 = 4 x 12.01 g/mol + 10 x 1.008 g/mol = 58.12 g/mol
Mass of C2H2 = mole fraction of C2H2 x total number of moles x molar mass of C2H2
= 0.15 x 0.04415 mol x 26.04 g/mol = 0.018 g
Mass of C3H8 = mole fraction of C3H8 x total number of moles x molar mass of C3H8
= 0.65 x 0.04415 mol x 44.1 g/mol = 1.57 g
Mass of C4H10 = mole fraction of C4H10 x total number of moles x molar mass of C4H10
= 0.20 x 0.04415 mol x 58.12 g/mol = 0.45 g
Therefore the mass of acetylene, propane, and butane in the mixture are 0.018 g, 1.57 g, and 0.45 g respectively.
To learn more about partial pressure :
https://brainly.com/question/31196860
#SPJ11
Solve the following differential equation using Runge-Katta method 4th order y'=Y-T²+1 with the initial condition Y(0) = 0.5 Use a step size h = 0.5) in the value of Y for 0≤t≤2 Runge-Kutta Method Order 4 Formula y(x + h) = y(x) + ²/(F₁+ 2F2+2F3+F₁) where F₁ = hf(x, y) h F₂=hs (2-3-4-2) hf|x h F2 F3 = hf ( x + 12₁ y + F/² ) ! F4= hf(x+h,y+F3)
To solve the given differential equation using the 4th order Runge-Kutta method, we will apply the provided formula: y(x + h) = y(x) + (1/6) * (F₁ + 2F₂ + 2F₃ + F₄).
where : F₁ = h * f(x, y), F₂ = h * f(x + h/2, y + F₁/2), F₃ = h * f(x + h/2, y + F₂/2), F₄ = h * f(x + h, y + F₃). Given the initial condition Y(0) = 0.5 and the step size h = 0.5, we will compute the value of Y for 0 ≤ t ≤ 2. First, let's define the function f(x, y) = Y - x² + 1 based on the given differential equation. Using the Runge-Kutta method with the provided formula and step size, we can iteratively compute the values of Y at different time steps.
Starting with x = 0 and y = Y(0) = 0.5, we calculate the values of Y for each time step until x = 2. The iteration process involves evaluating F₁, F₂, F₃, and F₄ using the given formulas and updating the value of y at each step. After completing the iteration, the final value of Y at x = 2 will be the solution to the differential equation using the 4th order Runge-Kutta method with the given initial condition and step size.
To learn more about equation click here: brainly.com/question/28792948
#SPJ11
Assume that the filter cake in Example 24.1 is a nonporous solid with an average diffusion coefficient of moisture Dy = 3x 10-6 m²/h (3.2x10-5 ft²/h). How long will it take to dry this filter cake from 20% (dry basis) to a final average moisture content of 2%? EXAMPLE 24.1. A filter cake 24 in. (610 mm) square and 2 in. (51 mm) thick, sup- ported on a screen, is dried from both sides with air at a wet-bulb temperature of 80°F (26.7°C) and a dry-bulb temperature of 160°F (71.1°C). The air flows parallel with the faces of the cake at a velocity of 8 ft/s (2.44 m/s). The dry density of the cake is 120 lb/ft³ (1,922 kg/m³). The equilibrium moisture content is negligible. Under the con- ditions of drying the critical moisture is 9 percent, dry basis. (a) What is the drying rate during the constant-rate period? (b) How long would it take to dry this material from an initial moisture content of 20 percent (dry basis) to a final moisture content of 10 per- cent? Equivalent diameter D is equal to 6 in. (153 mm). Assume that heat transfer by radiation or by conduction is negligible.
It will take approximately 16.3 hours to dry the filter cake from 20% (dry basis) to a final average moisture content of 2%.
To determine the drying time, we need to consider the moisture diffusion in the nonporous filter cake.
Given:
Initial moisture content (X1) = 20%
Final moisture content (X2) = 2%
Diffusion coefficient of moisture (Dy) = 3x10-6 m²/h
Equivalent diameter (D) = 6 in. (153 mm)
The drying process can be divided into two periods: the constant-rate period and the falling-rate period. In this case, we are assuming the filter cake is a nonporous solid, so only the constant-rate period will be considered.
During the constant-rate period, the drying rate is constant and given by the equation:
Rc = Dy * A * (X1 - X2) / t
where:
Rc = drying rate (kg/h)
A = surface area of the filter cake (m²)
X1 = initial moisture content (dry basis)
X2 = final moisture content (dry basis)
t = drying time (h)
First, let's calculate the surface area of the filter cake:
A = 2 * (24 in. * 2 in.) / (39.37 in./m)²
≈ 0.3068 m²
Now we can calculate the drying time (t) using the drying rate equation and solving for t:
t = Dy * A * (X1 - X2) / Rc
= (3x10-6 m²/h) * 0.3068 m² * (20% - 2%) / (Rc)
To calculate the drying rate (Rc), we need the value of the drying rate during the constant-rate period (Rc constant). Unfortunately, the value of Rc constant is not provided in the given information, so we cannot calculate the exact drying time.
To determine the drying time of the filter cake from 20% to 2% moisture content, we need the value of the drying rate during the constant-rate period (Rc constant), which is not provided in the given information. Without this value, we cannot calculate the exact drying time.
To know more about moisture , visit
https://brainly.com/question/30450623
#SPJ11
Please answer the following questions thank you
Iron and chromium are examples of materials that exhibit BCC crystal structure. Determine the atomic packing factor (APF) of chromium.
Iron and chromium are examples of materials that exhibit BCC crystal structure, the atomic packing factor (APF) of chromium is 0.68.
The atomic packing factor(APF) describes how closely atoms are packed together in a solid material. Body-centered cubic, or BCC is a crystal structure with an atomic packing factor of 0.68 which means that 68% of the available space in the unit cell is occupied by atoms.
The body-centered cubic (BCC) structure is found in many pure metals, such as iron, chromium, tungsten, and molybdenum and in some alloys .The BCC structure consists of a simple cubic lattice with an atom located at the center of the cube. This structure is characterized by eight atoms at the corners of the cube and one atom at the center of the cube.
To know more about BCC crystal here
https://brainly.com/question/13254579
#SPJ4
2. Calculate the pH of a solution that has a [OH-] = 2.50 x 10-4M. and pOH
4
Answer:
The pH of the solution is 10.40.
Explanation:
To get POH, we use this formula:
POH = -log[OH]
= -log 2.5 x 10^-4
= 3.6
when PH + POH = 14
therefore, = 14 - POH
= 14 - 3.6
= 10.4
Schematically discuss as to how to calculate
(i) Heat Load for a Partial Condenser
(ii) Heat load for a Total Condenser
(iii) Heat Load for a (Partial) Reboiler
(iv) Heat Load for a Total Condenser wi
A condenser is a heat exchanger that converts vapor or gas into liquid form by transferring heat to a cooling medium, typically through the process of condensation, resulting in the release of latent heat. It plays a crucial role in various systems, such as refrigeration, air conditioning, and chemical processing, by removing heat and facilitating the conversion of substances from a gaseous phase to a liquid phase.
Step-by-step breakdown of calculating heat load for different types of condensers and a reboiler:
(i) Heat Load for a Partial Condenser:
1. Use the equation Q = UAΔT, where Q is the heat load, U is the overall heat transfer coefficient, A is the heat transfer area, and ΔT is the temperature difference between the cooling medium and the vapor.
2. Calculate the overall heat transfer coefficient, U, using the equation U = 1/((1/ha) + (t/ka) + (1/hb)), where ha is the heat transfer coefficient on the air side, ka is the thermal conductivity of the tube material, hb is the heat transfer coefficient on the condensing side, and t is the tube thickness.
(ii) Heat Load for a Total Condenser:
1. Use the equation Q = hfg × V, where Q is the heat load, hfg is the latent heat of vaporization, and V is the volume of vapor that needs to be condensed.
(iii) Heat Load for a (Partial) Reboiler:
1. Use the equation Q = U × A × ΔT, where Q is the heat load, U is the overall heat transfer coefficient, A is the heat transfer area, and ΔT is the temperature difference between the heating medium and the liquid.
(iv) Heat Load for a Total Condenser with Partial Reboiler:
1. Use the equation Q = (hfg × V) + (U × A × ΔT), where Q is the heat load, hfg is the latent heat of vaporization, V is the volume of vapor that needs to be condensed, U is the overall heat transfer coefficient, A is the heat transfer area, and ΔT is the temperature difference between the heating medium and the liquid.
These equations can be used step-by-step to calculate the heat load for different types of condensers and a reboiler, based on the specific parameters and values given in the problem or experiment.
To know more about market condenser click here:
https://brainly.com/question/956180
#SPJ11
Given a transfer function G(S) = K(Tzs + 1) (115 + 1)(T25 + 1) Explain when the process will possess an inverse response.
If the zero is located in the RHP and the poles are located in the LHP, it is possible that the process will exhibit an inverse response based on the transfer function G(s) = K(Tzs + 1) / ((115 + 1)(T25 + 1)).
To determine when the process will possess an inverse response based on the given transfer function G(s) = K(Tzs + 1) / ((115 + 1)(T25 + 1)), we need to analyze the characteristics of the transfer function.
In a transfer function, an inverse response occurs when the sign of the phase angle changes by 180 degrees or π radians as the frequency increases. Mathematically, this corresponds to a pole and a zero that are located in the right-half plane (RHP) of the complex plane.
From the given transfer function G(s) = K(Tzs + 1) / ((115 + 1)(T25 + 1)), we can observe the following:
The numerator of the transfer function has a single zero, which is given by (Tzs + 1).
The denominator of the transfer function has two poles, which are given by ((115 + 1)(T25 + 1)).
To determine the location of the poles and zeros, we need specific values for T, z, and K. Without those values, we cannot determine the exact location of the poles and zeros or whether they lie in the RHP.
However, in general, if the zero (Tzs + 1) is located in the RHP and the poles ((115 + 1)(T25 + 1)) are located in the left-half plane (LHP), the transfer function may possess an inverse response. The presence of a pole in the RHP and a zero in the LHP can lead to an inverse response behavior.
To know more about Transfer Function, visit
brainly.com/question/32685285
#SPJ11
1. Convert an acceleration of 1 cm/s² to its equivalent in Km/yr² 2. Convert 23 lbm .ft/min² to it's equivalent in Kg. cm/s² 3. 150 lbm/ft³ into g/cm³ 4. Convert 50 BTU to Kwh. 5. Convert 2 Kwh
an acceleration of 1 cm/s² is equivalent to 3.17 × 10^-10 km/yr².23 lbm.ft/min² is equivalent to 0.001688 kg.cm/s².150 lbm/ft³ is equivalent to 8.59375 g/cm³.50 BTU is equivalent to 0.01465355 kWh.2 kWh remains as 2 kWh.
To convert acceleration 1 cm/s² to km/yr²:
To convert cm/s² to km/yr²
1 km = 100,000 cm
1 yr = 365 days
1 cm/s² = (1 cm/s²) * (1 km / 100,000 cm) * (1 yr / (365 * 24 * 60 * 60 s))
= 3.17 × 10^-10 km/yr²
an acceleration of 1 cm/s² is equivalent 3.17 × 10^-10 km/yr².
Convert 23 lbm.ft/min² to its equivalent in kg.cm/s²:
To convert lbm.ft/min² to kg.cm/s², we need to consider the conversion factors:
1 lbm = 0.453592 kg (since 1 pound-mass is approximately 0.453592 kilograms)
1 ft = 30.48 cm (since there are 30.48 centimeters in a foot)
1 min = 60 s (since there are 60 seconds in a minute)
23 lbm.ft/min² = (23 lbm.ft/min²) * (0.453592 kg / lbm) * (30.48 cm / ft) * (1 min / 60 s)
= 0.001688 kg.cm/s²
Therefore, 23 lbm.ft/min² is equivalent to approximately 0.001688 kg.cm/s².
Convert 150 lbm/ft³ to g/cm³:
To convert lbm/ft³ to g/cm³, we need to consider the conversion factors:
1 lbm = 0.453592 kg (since 1 pound-mass is approximately 0.453592 kilograms)
1 ft³ = 28316.8 cm³ (since there are 28316.8 cubic centimeters in a cubic foot)
1 g = 0.001 kg (since 1 gram is equal to 0.001 kilograms)
150 lbm/ft³ = (150 lbm/ft³) * (0.453592 kg / lbm) * (1 g / 0.001 kg) * (1 ft³ / 28316.8 cm³)
= 8.59375 g/cm³
Therefore, 150 lbm/ft³ is equivalent to approximately 8.59375 g/cm³.
Convert 50 BTU to kWh:
To convert BTU (British Thermal Units) to kWh (Kilowatt-hours), we need to consider the conversion factor:
1 BTU = 0.000293071 kWh
50 BTU = (50 BTU) * (0.000293071 kWh/BTU)
= 0.01465355 kWh
Therefore, 50 BTU is equivalent to approximately 0.01465355 kWh.
Convert 2 kWh:
No conversion is needed for this question as the given value is already in kWh.
Therefore, 2 kWh remains as 2 kWh.
To know more about acceleration, visit:
https://brainly.com/question/460763
#SPJ11
Question 7 of 10
Which two objects would experience the greatest gravitational force between
them?
A. Two objects positioned 100 miles apart
B. Two objects positioned 1000 miles apart
C. Two objects positioned 10 miles apart
OD. Two objects positioned 1 mile apart
The gravitational force between two objects is greatest when they are positioned 1 mile apart, according to the inverse square law of gravity. The correct answer is option D.
The force of gravity is proportional to the mass of the objects and inversely proportional to the square of the distance between them. This means that two objects positioned closer together experience a greater gravitational force than two objects positioned farther apart. Therefore, the two objects positioned 1 mile apart would experience the greatest gravitational force between them, as they are the closest to each other, given all other things being equal (same mass, same size). Therefore, option D is the correct answer to the question above.Newton's universal law of gravitation states that the force of attraction between any two bodies is inversely proportional to the square of the distance between them and directly proportional to the product of their masses.For more questions on gravitational force
https://brainly.com/question/28623512
#SPJ8
1.3 Provide the missing reactants for the following transformations: a с benzene ethylbenzene b 2-bromo-5-sulfobenzoic acid a. b. C. d. f. g. h. 1-bromo-2-ethylbenzene e/f g 2-bromobenzoic acid h (4)
a. The missing reactant for the transformation from benzene to ethylbenzene is ethene (C2H4). b. The missing reactant for the transformation to produce 2-bromo-5-sulfobenzoic acid is 2-bromobenzoic acid.
a. The transformation from benzene to ethylbenzene involves the addition of an ethyl group (C2H5) to the benzene ring. Ethene (C2H4) is a commonly used reactant in this process, and it reacts with a catalyst such as aluminum chloride (AlCl3) to produce ethylbenzene.
b. To synthesize 2-bromo-5-sulfobenzoic acid, the starting material is 2-bromobenzoic acid. The addition of a sulfonic acid group (-SO3H) to the 5th position of the benzene ring is carried out through a sulfonation reaction using sulfuric acid (H2SO4).
The missing reactants for the given transformations have been identified. The transformation from benzene to ethylbenzene requires ethene as a reactant, while the synthesis of 2-bromo-5-sulfobenzoic acid involves starting with 2-bromobenzoic acid. These reactants are crucial for the respective chemical reactions to occur and yield the desired products.
To know more about C2H4 , visit;
https://brainly.com/question/32913572
#SPJ11
Which of the following is a secondary alkyl halide? a. chlorocyclopentane b.1-chloropentane c. 2-chloro-2-methylhexane d. 1-chloro-3,3-dimethyloctane
However, only option C contains a secondary alkyl halide. Therefore, the answer is option C (2-chloro-2-methylhexane).
A secondary alkyl halide is a halide that has a secondary carbon atom as a part of its molecular structure. A secondary carbon atom is connected to two other carbon atoms through single covalent bonds. A secondary alkyl halide may have a halogen substituent attached to the secondary carbon atom.
The carbon atom to which the halogen is attached is called the alpha-carbon atom. The answer is option C (2-chloro-2-methylhexane) because it has a secondary carbon atom, meaning the carbon atom to which the halogen is attached is connected to two other carbon atoms.
Therefore, it has two carbon atoms as substituents. Alkyl halides have the general formula R-X, where R is an alkyl group (a group consisting of only hydrogen and carbon atoms) and X is a halogen (fluorine, chlorine, bromine, or iodine). In this question, all the options contain alkyl halides.
To know more about alkyl visit:
https://brainly.com/question/31973951
#SPJ11
An alkyne is represented by the molecular formula? a)C6H6
b)C5H12 c)C4H6 d)C3H6
An alkyne is represented by the molecular formula of (d) C3H6.
A chemical compound is represented by a molecular formula. It describes the number and kind of atoms present in a molecule. An alkyne is a type of hydrocarbon. It is a type of unsaturated hydrocarbon having a triple bond between two carbon atoms. Thus, an alkyne is represented by the molecular formula CnH2n-2.
The carbon-carbon triple bond in alkynes is a strong bond that consists of one sigma bond and two pi bonds.
The molecular formula of an alkyne is CnH2n-2. The hydrocarbons with triple bonds have a higher degree of unsaturation, thus they are more reactive than their corresponding alkenes. Alkynes are used in the preparation of various compounds that are used in our daily lives.
Some of the uses of alkynes are:
It is used in welding.
It is used in organic synthesis.
It is used in the production of synthetic rubber.
It is used in the production of plastics such as nylon and neoprene.
Hence, the correct option is (d) C3H6.
To know more about alkyne visit:
https://brainly.com/question/30901211
#SPJ11
The resistance of a thermometer is 5 ohm at 25 degree Celsius and 6 2 at 50 degree Celsius. Using linear approximation, calculate the value of resistance temperature coefficient at 45 degree Celsius.
The approximate resistance value at 45 degrees Celsius is around 5.8 ohms.
To calculate the value of the resistance temperature coefficient at 45 degrees Celsius using linear approximation, we can use the formula:
R(T) = R0 + α(T - T0),
where R(T) is the resistance at temperature T, R0 is the resistance at a reference temperature T0, α is the resistance temperature coefficient, and (T - T0) is the temperature difference.
Given that the resistance at 25 degrees Celsius is 5 ohms (R0 = 5) and the resistance at 50 degrees Celsius is 6 ohms (R(T) = 6), we can calculate the value of α.
6 = 5 + α(50 - 25),
Simplifying the equation:
1 = 25α,
Therefore, α = 1/25 = 0.04 ohm/degree Celsius.
Using the linear approximation, we can approximate the value of the resistance at 45 degrees Celsius:
R(45) = 5 + 0.04(45 - 25) = 5 + 0.04(20) = 5 + 0.8 = 5.8 ohms.
Therefore, the value of the resistance at 45 degrees Celsius is approximately 5.8 ohms.
You can learn more about resistance at
https://brainly.com/question/17563681
#SPJ11
Q1. Moist air, saturated at 2°C, enters a heating coil at a rate of 10 m/s. Air leaves the coil at 40°C. (a) Find the inlet/outlet properties of air (i.e., enthalpy, moisture content, relative humidity, and specific volume). (b) How much heat input is required to achieve this?
The goal is to determine the inlet/outlet properties of the air (enthalpy, moisture content, relative humidity, and specific volume) and calculate the amount of heat input required to achieve this temperature change.
To find the inlet/outlet properties of the air, we need to use psychrometric charts or equations that relate the properties of moist air. Using the given temperatures, we can determine the properties at the inlet and outlet conditions. The enthalpy, moisture content (specific humidity), relative humidity, and specific volume can be calculated using the psychrometric equations.
The amount of heat input required can be calculated using the energy balance equation:
Q = m * (h_out - h_in)
Where Q is the heat input, m is the mass flow rate of the air, and h_out and h_in are the enthalpies of the air at the outlet and inlet conditions, respectively. By substituting the known values and calculating the enthalpy difference, the heat input required to achieve the temperature change can be determined.
To learn more about humidity click here, brainly.com/question/30672810
#SPJ11
When analysing the acceleration of liquid as they flow through a diffuser, what would you choose as your system and what type of system is this? O a. Volume within real surface of the diffuser including inlet and outlet cross-sections. This is a control volume. O b. Volume within the diffuser, bounded by the entire inner surface of the diffuser and the inlet and outlet cross-sections. This is a control volume. O c. Volume outside of diffuser. Take the whole nozzle as system. This is a control volume. d. Volume within imaginary surface of the diffuser including inlet and outlet cross-sections. This is a control volume.
When analyzing the acceleration of liquid as they flow through a diffuser, the volume within the imaginary surface of the diffuser including inlet and outlet cross-sections is chosen as the system and this is a control volume. Therefore, option D is correct.
A diffuser is a device that gradually expands a fluid's cross-sectional area to reduce its velocity and increase its static pressure. This is done by reducing the kinetic energy of the fluid by converting it into pressure energy. Diffusers are used in a variety of applications, including steam turbines, jet engines, and car engines, to increase efficiency.
To examine the flow of fluid through a diffuser, a control volume must be chosen. A control volume, often known as a system, is a volume that encloses the area in which the fluid's mass is evaluated, as well as the surrounding space that the fluid interacts with. It can be any shape, but it should not deform during the examination period. When analyzing a diffuser, the volume inside the imaginary surface of the diffuser including inlet and outlet cross-sections is chosen as the system. This control volume is selected because the flow enters the diffuser through its inlet and exits through its outlet. The change in fluid velocity and density is determined by the control volume, which includes the diffuser inlet and outlet areas.
About diffuser : https://brainly.com/question/24233534
#SPJ11
Use the octet rule to predict the number of bonds C, P, S, and Clare likely to make in a molecule, A. four, three, two, one, respectively. B. four, four, three, three, respectively C. four, one, one, one, respectively D. three three, two, two, respectively
Based on the octet rule, the predicted number of bonds in molecule A would be four for carbon, three for phosphorus, two for sulfur, and one for chlorine (option A).
According to the octet rule, atoms tend to form bonds in order to achieve a stable electron configuration with eight valence electrons. Based on this rule, we can predict the number of bonds carbon ©, phosphorus (P), sulfur (S), and chlorine (Cl) are likely to form in a molecule.
The options provided are as follows:
A. Four bonds for carbon, three bonds for phosphorus, two bonds for sulfur, and one bond for chlorine.
B. Four bonds for carbon, four bonds for phosphorus, three bonds for sulfur, and three bonds for chlorine.
C. Four bonds for carbon, one bond for phosphorus, one bond for sulfur, and one bond for chlorine.
D. Three bonds for carbon, three bonds for phosphorus, two bonds for sulfur, and two bonds for chlorine.
Applying the octet rule, we determine that carbon typically forms four bonds, phosphorus forms three bonds, sulfur forms two bonds, and chlorine forms one bond. Comparing these predictions with the given options, we find that option A matches the predicted number of bonds: Four, three, two, one, respectively.
Learn more about Octet rule here: brainly.com/question/30779148
#SPJ11
Consider the following chemical reaction: 3 MgCl2 + 2 Na3PO4 6 NaCl + Mg3(PO4)2. Assume that 0.75 mol of MgCl2 and 0.65 mol of Na3PO4 are placed in a reaction vessel.
a) Verify that Na3PO4 is the excess reactant and MgCl2 is the limiting reactant.
b) How many moles of the excess reactant are left over after the reaction stops?
c) How many moles of NaCl will be produced in this reaction? (Remember—you must base this answer on how many moles of the limiting reactant that reacted.)
Answer:
To determine the limiting reactant and the excess reactant, we need to compare the stoichiometry of the reaction with the amounts of each reactant given.
The balanced chemical equation is:
3 MgCl2 + 2 Na3PO4 -> 6 NaCl + Mg3(PO4)2
Given:
Moles of MgCl2 = 0.75 mol
Moles of Na3PO4 = 0.65 mol
a) To verify the limiting reactant, we need to calculate the moles of Na3PO4 and MgCl2 needed to react completely, based on the stoichiometry of the balanced equation.
From the equation, we can see that:
For every 3 moles of MgCl2, 2 moles of Na3PO4 are required.
Therefore, the moles of Na3PO4 required to react with 0.75 mol of MgCl2 would be:
(0.75 mol MgCl2) x (2 mol Na3PO4 / 3 mol MgCl2) = 0.5 mol Na3PO4
Since we have 0.65 mol of Na3PO4, which is greater than the required amount of 0.5 mol, Na3PO4 is the excess reactant.
b) To find the moles of the excess reactant left over, we subtract the moles of Na3PO4 that reacted from the initial moles:
0.65 mol Na3PO4 - 0.5 mol Na3PO4 = 0.15 mol Na3PO4 (left over)
c) To determine the moles of NaCl produced in the reaction, we need to calculate the moles of the limiting reactant (MgCl2) that reacted. From the balanced equation, we know that:
For every 3 moles of MgCl2, 6 moles of NaCl are produced.
Using the stoichiometry, we can calculate the moles of NaCl produced:
(0.75 mol MgCl2) x (6 mol NaCl / 3 mol MgCl2) = 1.5 mol NaCl
Therefore, 1.5 mol of NaCl will be produced in this reaction.
50% brine solution is transferred into a membrane reactor using a 3418 W pump. Given, the pump work 771.8 J/kg. Calculate the flowrate of the brine solution if the density of the brine solution is 1320 kg/m³ Your answer must be in (m³/min).
The density of the brine solution is given as 1320 kg/m³, and a 50% brine solution is being used. A pump with a power of 3418 W is used, and the pump work is given as 771.8 J/kg.
To calculate the flowrate, we can start by determining the total power required to pump the brine solution. This can be done by multiplying the pump work (771.8 J/kg) by the density of the brine solution (1320 kg/m³), which gives us 1017576 J/m³.
Next, we need to convert the pump power from watts to joules per minute. Since 1 watt is equal to 1 joule per second, and there are 60 seconds in a minute, we multiply the pump power (3418 W) by 60, resulting in 205080 J/min.
To find the flowrate, we divide the total power required to pump the brine solution (1017576 J/m³) by the pump power per minute (205080 J/min), giving us a flowrate of approximately 4.96 m³/min.
In summary, the flowrate of the brine solution transferred into the membrane reactor is approximately 4.96 m³/min. This is calculated by first determining the total power required to pump the brine solution based on the pump work and the density of the solution. Then, converting the pump power from watts to joules per minute, and finally dividing the total power by the pump power per minute to obtain the flowrate in cubic meters per minute.
To learn more about density click here, brainly.com/question/29775886
#SPJ11