At a local business school, there is a toasted submarine sandwich process that uses a conveyor-fed oven. ( See picture below) Alice is the sole operator of the sub making process. In the first step of the process, she spends 2 minutes putting various ingredients in the sub. Then, she puts the sub on a conveyor belt and, over a period of 12 minutes, the conveyor moves the sub from the beginning of the oven to the end of the oven, fully toasting it. After the sub comes out of the oven, Alice spends 1 minute slicing the sandwich and putting it in a box. At most, 5 subs can fit in the oven at once. The toasting time in the oven does not depend on the number of subs in the oven.
Required:
a. Draw a process-flow chart for the sandwich-making process.
b. Calculate the hourly capacity of this sandwich-making process.
c. Suppose another employee is hired to do the slicing and boxing, and Zeynep now only loads the sandwiches with the right ingredients. What is the hourly capacity of this process with the additional employee?
Answers
Answer:
b. 20 sandwiches
c. 25 sandwiches
Explanation:
1. I added this diagram of the flow chart as an attachment
2.
Hourly capacity of sandwich making process:
Time it makes to 1 sandwich: 2 + 12 + 1 = 15
The time alice spends when making one sandwich = 2 + 1 = 3
oven uses 12 minutes to process one sandwich, so in 12 minutes, alice can can make 12/3 sandwiches = 4
The Oven can take 5 subs at a time,
So in one hour, the making process
= 60/3 = 20 sandwiches
3.
To calculate Hourly capacity with additional employee:
Alice takes 2 minutes
Additional employees takes 1 minute
Oven uses 12 minutes to make one sandwich
It's only after every 2 minutes Alice can put one sandwich. The oven can take only 5 sandwiches.
So in an hour:
Since oven can take 5
Sandwiches at a time, therefore one sandwich takes,
12 / 5 = 2.4 minutes.
In 1 hour number we have number of processed sandwich as
60 / 2.4 = 25
At hourly capacity with additional employees we have 25 sandwiches
Related Questions
connecting u dropped its price from $20 to $16 per gigabyte of data. Joe according to the midpoint formula, Connecting U reduced its price by what percentage?
Answers
Answer:
-$22.2
Explanation:
The computation of price by percentage is shown below:-
Price by percentage = (End price - Beginning price) ÷ (End price - Beginning price) ÷ 2 × 100
= ($16 - $20) ÷ ($16 - $20) ÷ 2 × 100
= -$4 ÷ $18 × 100
= -$400 ÷ $18
= -$22.2
So, we have applied the above formula.
And, the same is to be considered
Connecting u dropped price in percentage is 22.2%
Midpoint formula:Given that;
Old price = $20
New price = $16
Find:
Connecting u dropped price in percentage
Computation:
[tex]Dropped\ price\ in\ percentage=[\frac{16-20}{\frac{16+20}{2} }]100\\\\Dropped\ price\ in\ percentage=[\frac{16-20}{18}]100\\\\Dropped\ price\ in\ percentage=[\frac{-4}{18}]100\\\\Dropped\ price\ in\ percentage=22.2[/tex]
Connecting u dropped price in percentage = 22.2%
Find out more information about 'Midpoint formula'
https://brainly.com/question/4728902?referrer=searchResults
In 2009, an 1893 Morgan silver dollar sold for $6,450. Required: What was the rate of return on this investment? (Do not include the percent sign (%). Enter rounded answer as directed, but do not use the rounded numbers in intermediate calculations. Round your answer to 2 decimal places (e.g., 32.16).)
Answers
Answer: 7.86%
Explanation:
Using the Future Value formula;
= Amount * ( 1 + r)^n
The question is looking for the rate so making that the subject would be;
Assuming the car was $1 in 1893,
And n = 2009 - 1893 = 116 years
FV = Amount * ( 1 + r)^n
( 1 + r)^n = FV/ Amount
1 ^n + r^n = FV / Amount
r = n√((FV/ Amount) / 1^n)
r = n√(FV/ Amount)
r = 116√(6,450/ 1)
= 1.07855
Subtract 1 for the percentage;
= 1.07855 - 1
= 7.86%
coomer co had net sales of 600000 net income of 35260 and average total assets of 680000 what is the return on total assets
Answers
Answer:Return on Total assets ==5.19%
Explanation:
Return on Total assets shows one the idea of the profitability of a company's assets in generating revenue before interest and taxes. it is expressed in percentage and its formula is given as
Return on Assets = Net Income (Earning before interest and taxes) / Average total assets
= 35,260/ 680,000 = 0.05185 x 100
=5.19%
Answer:
coomer heehee
Explanation:
R. J. Graziano Wholesale Corp. uses the LIFO method of inventory costing. In the current year, profit at R. J. Graziano is running unusually high. The corporate tax rate is also high this year, but it is scheduled to decline significantly next year. In an effort to lower the current year's net income and to take advantage of the changing income tax rate, the president of R. J. Graziano Wholesale instructs the plant accountant to recommend to the purchasing department a large purchase of inventory for delivery 3 days before the end of the year. The price of the inventory to be purchased has doubled during the year, and the purchase will represent a major portion of the ending inventory value.
Required:
a. What is the effect of this transaction on this year's and next year's income statement and income tax expense? Why?
b. If R. J. Graziano Wholesale had been using the FIFO method of inventory costing, would the president give the same directive?
c. Should the plant accountant order the inventory purchase to lower income? What are the ethical implications of this order?
Answers
Answer:
a. What is the effect of this transaction on this year's and next year's income statement and income tax expense? Why?
The inventory account is a permanent asset account in the balance sheet, so it doesn't matter if the company purchases all that it can during the last days of December, it will not affect the income statement, nor their tax liability for the current year. A company only recognizes cost of goods sold when the goods are actually sold, not when they are purchased.
Since the company uses the LIFO (last in, first out) inventory method, all it will do is increase the value of ending inventory which changes into beginning inventory next year. You can reduce next year's income more by purchasing the goods next year.
b. If R. J. Graziano Wholesale had been using the FIFO method of inventory costing, would the president give the same directive?
If the company used the FIFO method, the result will be the same. Inventory is not COGS, whether you use FIFO, LIFO weighted average, specific identification, or any other acronym that you might come up with. At beginning of the year, inventory must be average to determine beginning inventory. it might help to increase COGS a little, therefore, decreasing net income, but the effects shouldn't be significant.
c. Should the plant accountant order the inventory purchase to lower income? What are the ethical implications of this order?
It is useless, and he should know it. The only implication is that this will help him realize his low IQ.
The last in first out is the common method specified by the generally accepted accounting principles (GAAP). It is the method used to maintain the account of inventory. It states that the recently purchased products are expensed at the first expense.
a. The inventory account is a permanent asset account in the balance sheet, so it doesn't matter if the company purchases all that it can during the last days of December, it will not affect the income statement, nor their tax liability for the current year. A company only recognizes the cost of goods sold when the goods are actually sold, not when they are purchased.
b. If the company used the FIFO method, the result will be the same. Inventory is not COGS, whether you use FIFO, LIFO weighted average, specific identification, or any other acronym that you might come up with. At beginning of the year, inventory must be average to determine beginning inventory. it might help to increase COGS a little.
Therefore, decreasing net income, but the effects shouldn't be significant.
c. It is useless, and he should know it. The only implication is that this will help him realize his low IQ.
To know more about the LIFO method, refer to the link below:
https://brainly.com/question/17218525
Tom Scott is the owner, president, and primary salesperson for Scott Manufacturing. Because of this, the company's profits are driven by the amount of work Tom does. If he works 40 hours each week, the company's EBIT will be $615,000 per year; if he works a 50 hour week, the company's EBIT will be $755,000 per year. The company is currently worth $3.85 million. The company needs a cash infusion of $1.95 million, and it can issue equity or issue debt with an interest rate of 7 percent. Assume there are no corporate taxes.
What are the cash flows to Tom under each scenario?
Answers
Answer:
Please see answer as attached.
Explanation:
a. What are the cash flows to Tom under each scenario.
•Cash flow under scenario 1.
40 hour week cash flow $478,500
50 hour week Cash flow $618,500
Total ownership percentage 66.38%
•Scenario 2.
40 week cash flow $408,237
50 week cash flow $501,169
Please find attached detailed computation of the above solution.
There are two machines for sale that you are considering purchasing for your sawmill to produce hardwood flooring. You want to find the one that has a higher process capability index, or Cpk. The goal is to produce flooring that is between 46 and 50 millimeters thick. The first machine is more accurate on average, producing to a mean of 48 millimeters...but unfortunately it has more variation with a standard deviation of 7 millimeters. The second machine is not as accurate, with a mean of 47mm, but does deliver a more consistent output, with standard deviation of 3mm.
[ Select] What is the Cpk of machine 1?
[Select] What is the Cpk of machine 2?
[ Select] If your goal is to be capable', what would you do?
[ Select] If (somehow) you could combine the best of both machines (the centering or average of machine 1 coupled with the constancy or standard deviation of machine 2, what would the Cpk be?
Answers
Answer:
Machine 1 = 0.092
Machine 2 = 0.111
Combined = 0.222
Explanation:
Given the following :
Lower specification limit (LSL) = 46 mm
Upper specification limit (USL) = 50 mm
MACHINE 1:
Mean 1 (m1) = 48
Standard deviation 1 (σ1) = 0.7
MACHINE 2:
Mean 2 (m2) = 47
Standard deviation 2 (σ2) = 0.3
Cpk formula:
Min(USLcpk, LSLcpk)
USLcpk = (USL - m) / 3σ
LSLcpk = (m - LSL) / 3σ
FOR MACHINE 1:
USLcpk = (50 - 48) / 3(7) = 0.0952
LSLcpk = (48 - 46) / 3(7) = 0.0952
Cpk = Min(0.952, 0.952) = 0.952
FOR MACHINE 2:
USLcpk = (50 - 47) / 3(3) = 0.333
LSLcpk = (47 - 46) / 3(3) = 0.111
Min(USLcpk, LSLcpk)
Cpk = Min(0.333, 0.111) = 0.111
When combined :
Mean = 48
σ = 3
USLcpk = (50 - 48) / 3(3) = 0.222
LSLcpk = (48 - 46) / 3(3) = 0.222
Min(USLcpk, LSLcpk)
Cpk = Min(0.222, 0.222) = 0.222
Karen, an automobile mechanic employed by an auto dealership, is considering opening a fast-food franchise. If Karen decides not to acquire the fast-food franchise, any investigation expenses are:
Answers
Answer:
The right solution is "Not Deductible".
Explanation:
If everyone's investigation for a company or starting a company fails, costs classified into two broad categories besides you:
Unless you're a person and your effort to start a company isn't successful, there are 2 kinds of investments you have had in attempting to develop yourself in the company.The expenses clients used to have before you made an intention to open a particular business. These would be personal but non-deductible charges. They include other expenses incurred throughout a regular search for something like a company or equity investment opportunity or perhaps a thorough investigation into it. The expenditures you have in your effort to purchase or launch a particular venture. Such charges are capital expenditures, and that as a capital loss, you will subtract them.KW Steel Corp. uses the LIFO method of inventory valuation. Waretown Steel, KW’s major competitor, instead uses the FIFO method. The following are excerpts from each company’s 20X1 financial statements:
KW Steel Corp. Waretown Steel ($ in millions)
20X1 20X0 20X1 20X0
Balance sheet inventories $797.6 $692.7 $708.2 $688.6
LIFO reserve 378.0 334.9
Sales 4,284.8 4,029.7 3,584.2 3,355.8
Cost of goods sold 3,427.8 3,226.5 2,724.0 2,617.5
Required:
a. Compute each company’s 20X1 gross margin percentage and inventory turnover using cost of goods sold as reported by each company. Restate KW’s cost of goods sold and inventory balances to the FIFO basis. On the basis of its adjusted data, recompute KW’s gross margin percentage and inventory turnover.
b. Restate KW's cost of goods sold and inventory balances to the FIFO basis. On the basis of its adjusted data, re-compute KW's gross margin percentage and inventory turnover. Explain how the revised figures alter your earlier comparisons.
Answers
Answer:
KW Steel Corp. and Waretown Steel
LIFO and FIFO Inventory Valuation Methods:
a. Computation of each company's 20X1 gross margin percentage and inventory turnover:
KW Steel Corp. Waretown Steel
($ in millions) ($ in millions)
20X1 20X0 20X1 20X0
B/sheet inventories $797.6 $692.7 $708.2 $688.6
LIFO reserve 378.0 334.9
Sales 4,284.8 4,029.7 3,584.2 3,355.8
Cost of goods sold 3,427.8 3,226.5 2,724.0 2,617.5
Gross margin $857.0 $803.2 $860.0 $738.3
Gross margin % 20% 24%
Average Inventory = $745.15 $698.4
Inventory Turnover 4.6 ($3,427.8/$745.15) 3.9 ($2,724.0/$698.4)
b. Restatement of KW's cost of goods sold and inventory balances to FIFO:
KW Steel Corp. Waretown Steel
($ in millions) ($ in millions)
20X1 20X0 20X1 20X0
Sales 4,284.8 4,029.7 3,584.2 3,355.8
Cost of goods sold $3,805.8 $3,561.40
Gross margin $479.0 $468.3 $860.0 $738.3
Gross margin % 11.2% 24%
Inventory Turnover 9.8 ($3,805.8/$388.75) 3.9 ($2,724.0/$698.4)
c. The performance of KW Steel worsened with the reinstatement of the LIFO reserves. Before the reinstatement, KW Steel was running closely behind its competitor, Waretown Steel. But after the reinstatement, Waretown gave KW Steel more gap in performance. This reinstatement shows that when the performances of two companies are compared based on different criteria, the financial analyst will likely arrive at a wrong conclusion.
Explanation:
a) Data and Calculations:
KW Steel Corp. Waretown Steel
($ in millions) ($ in millions)
20X1 20X0 20X1 20X0
B/sheet inventories $797.6 $692.7 $708.2 $688.6
LIFO reserve 378.0 334.9
Sales 4,284.8 4,029.7 3,584.2 3,355.8
Cost of goods sold 3,427.8 3,226.5 2,724.0 2,617.5
Gross margin $857.0 $803.2 $860.0 $738.3
Gross margin % 20% 24%
Average Inventory = $745.15 $698.4
Inventory Turnover 4.6 ($3,427.8/$745.15) 3.9 ($2,724.0/$698.4)
c.
KW Steel Corp. Waretown Steel
($ in millions) ($ in millions)
20X1 20X0 20X1 20X0
B/sheet inventories $797.6 $692.7 $708.2 $688.6
LIFO reserve 378.0 334.9
FIFO balance $419.6 $357.8
Cost of goods sold 3,427.8 3,226.5 2,724.0 2,617.5
LIFO reserve 378.0 334.9
Average Inventory = $745.15 $698.4
New Average Invt. 388.75
Sunset Products manufactures skateboards. The following transactions occurred in March. Purchased $24,500 of materials on account. Issued $1,450 of supplies from the materials inventory. Purchased $25,900 of materials on account. Paid for the materials purchased in transaction (1) using cash. Issued $30,900 in direct materials to the production department. Incurred direct labor costs of $29,500, which were credited to Wages Payable. Paid $22,400 cash for utilities, power, equipment maintenance, and other miscellaneous items for the manufacturing shop. Applied overhead on the basis of 120 percent of direct labor costs. Recognized depreciation on manufacturing property, plant, and equipment of $5,900.
The following balances appeared in the accounts of Sunset Products for March:
Beginning Ending
Materials Inventory $ 13,500 ?
Work-in-Process Inventory 24,750 ?
Finished Goods Inventory 97,500 $ 54,750
Cost of Goods Sold 120,000
Required:
a. Prepare journal entries to record the transactions. (If o entry is required for a transaction/event, select "No journal entry required" in the first account field.)
Transactions General Journal Debit Credit
1.
2.
3.
4.
5.
6.
7.
8.
9.
b. Prepare T-accounts to show the flow of costs during the period from Materials Inventory through Cost of Goods Sold.
Materials Inventory
Beg. bal. ___________ ____________
______ ___________ ____________ ______
______ ___________ ____________ ______
______ ___________ ____________ ______
End. bal. ___________ ____________ ______
Work in Progress Inventory
Beg. bal. ___________ ____________
______ ___________ ____________ ______
______ ___________ ____________ ______
______ ___________ ____________ ______
______ ___________ ____________ ______
End. bal. ___________ ____________ ______
Manufacturing Overhead Control
Beg. bal. ___________ ____________
______ ___________ ____________ ______
______ ___________ ____________ ______
______ ___________ ____________ ______
______ ___________ ____________ ______
End. bal. ___________ ____________ ______
Applied Manufacturing Overhead
Beg. bal. ___________ ____________
______ ___________ ____________ ______
______ ___________ ____________ ______
End. bal. ___________ ____________ ______
Accounts Payable
Beg. bal. ___________ ____________
______ ___________ ____________ ______
______ ___________ ____________ ______
______ ___________ ____________ ______
End. bal. ___________ ____________ ______
Cash
Beg. bal. ___________ ____________
______ ___________ ____________ ______
______ ___________ ____________ ______
______ ___________ ____________ ______
End. bal. ___________ ____________ ______
Wages Payable
Beg. bal. ___________ ____________
______ ___________ ____________ ______
______ ___________ ____________ ______
End. bal. ___________ ____________ ______
Accumulated Depreciation-Property, Plant, and Equipment
Beg. bal. ___________ ____________
______ ___________ ____________ ______
______ ___________ ____________ ______
End. bal. ___________ ____________ ______
Finished Goods Inventory
Beg. bal. ___________ ____________
Goods Completed ___________ ____________ Transfer to Cost of Goods Sold
End. bal. ___________ ____________
Cost of Goods Sold
Beg. bal. ___________ ____________
Finished Goods Inventory ___________ ____________
End. bal. ___________ ____________
Answers
Answer:
Sunset Products
a) Journal Entries:
Transactions General Journal Debit Credit
Materials Inventory $24,500
Accounts Payable $24,500
To record the purchase of materials on account.
Manufacturing Overhead $1,450
Materials Inventory $1,450
To record the issue of supplies.
Materials Inventory $25,900
Accounts Payable $25,900
To record the purchase of materials on account.
Accounts Payable $24,500
Cash Account $24,500
To record the payment on account.
Work-in-Process Inventory $30,900
Materials Inventory $30,900
To record the issue of direct materials to the production department.
Work-in-Process Inventory $29,500
Factory Wages $29,500
To record direct labor costs to work in process.
Manufacturing Overhead $22,400
Cash Account $22,400
To record the payment for utilities and other expenses.
Work-in-Process Inventory $35,400
Manufacturing Overhead $35,400
To apply overhead to work in process.
Manufacturing Overhead $5,900
Depreciation Expense $5,900
To recognize depreciation on property, plant, and equipment.
Manufacturing overhead applied $29,750
Manufacturing overhead $29,750
To transfer manufacturing overhead to the overhead applied account.
b) T-accounts:
Materials Inventory
Transaction Details Debit Credit
Beginning balance $ 13,500
Accounts Payable 24,500
Manufacturing overhead $1,450
Accounts Payable 25,900
Work-in-Process Inventory 30,900
Ending balance $31,550
Work-in-Process Inventory
Transaction Details Debit Credit
Beginning balance $24,750
Materials Inventory 30,900
Factory Wages 29,500
Manufacturing Overhead 35,400
Finished Goods Inventory $71,600
Ending balance 54,200
Finished Goods Inventory
Transaction Details Debit Credit
Beginning balance $97,500
Work-in-Process 71,600
Cost of goods sold $114,350
Ending balance 54,750
Cost of Goods Sold
Transaction Details Debit Credit
Beginning balance $120,000
Overapplied overhead $5,650
Ending balance 114,350
Manufacturing Overhead Control Account
Transaction Details Debit Credit
Materials Inventory $1,450
Cash Account 22,400
Depreciation expense 5,900
Manufacturing overhead applied $29,750
Manufacturing Overhead Applied
Transaction Details Debit Credit
Work in Process $35,400
Manufacturing overhead $29,750
Overapplied overhead 5,650
Accounts Payable
Transaction Details Debit Credit Materials Inventory $24,500
Materials Inventory 25,900
Cash Account $24,500
Ending Balance 25,900
Cash Account
Transaction Details Debit Credit
Accounts Payable $24,500
Manufacturing Overhead 22,400
Explanation:
a) Data and Calculations:
Accounts balances of Sunset Products for March:
Beginning Ending
Materials Inventory $ 13,500 ?
Work-in-Process Inventory 24,750 ?
Finished Goods Inventory 97,500 $ 54,750
Cost of Goods Sold 120,000
Southwest Milling Co. purchased a front-end loader to move stacks of lumber. The loader had a list price of $140,000. The seller agreed to allow a 4 percent discount because Southwest Milling paid cash. Delivery terms were FOB shipping point. Transportation cost amounted to $1,200. Southwest Milling had to hire a specialist to calibrate the loader. The specialist’s fee was $1,800. The loader operator is paid an annual salary of $60,000. The cost of the company’s theft insurance policy increased by $800 per year as a result of acquiring the loader. The loader had a four-year useful life and an expected salvage value of $6,000.
Required:
a. Determine the amount to be capitalized in an asset account for the purchase of the loader.
b. Record the purchase in general journal format.
Answers
Answer:
137,400
Explanation:
We can calculate the cost of equipment by adding all the directly attributable costs incurred in bringing the asset into a workable condition.
Requirement 1:
List Price 140,,000
Discount (140,000 x 4%) (5,600)
Freight cost 1,200
Specialist Fee 1,800
Total Cost 137,400
Requirement 2:
Dr Equipment Loader 137,400
Cr Cash 137,400
You first look at the trial balance. In addition to the account balances reported in the income statement, the ledger contains these selected balances at March 31, 2022. Supplies $4,600 Prepaid Insurance 7,500 Notes Payable 21,000 You then make inquiries and discover the following.
1. Rent revenue includes advanced rentals for summer-month occupancy, $21,500.
2. There were $530 of supplies on hand at March 31.
3. Prepaid insurance resulted from the payment of a 1-year policy on January 1, 2022.
4. The mail on April 1, 2022, brought the following bills: advertising for week of March 24, $150; repairs made March 10, $1,050; and utilities $200.
5. Wage expense totals $270 per day. At March 31, 3 days’ wages have been incurred but not paid.
6. The note payable is a 3-month, 8% note dated January 1, 2022.
Answers
Answer:
rent revenue 21,500 debit
unearned revenue 21,500 credit
--to amend incorrect recognition of revenue--
Supplies expense 4,070 debit
Supplies 4,070 credit
--to record use of supplies--
Insurance expense 1,875 debit
Prepaid Insurance 1,875 credit
--to record use of supplies--
advertizing expense 150 debit
repair expense 1050 debit
utilities expense 200 debit
account payable 1,400 credit
--to record accrued expenses--
wages expense 810 debit
wages payable 810 credit
--to record accrued wages--
interest expense 420 debit
interest payable 420 credit
--to record accrued interest--
Explanation:
#1 unearned revenue
The company should not recognize the summer-month occupancy as this occurs between April and June thereofre it is unearned The company has an obligation to perform. To give the rental space thus it is a liability not earnings.
#2 Supplies adjustment:
Jan 1st $4,600 - March 31st $530 = $4,070 supplies expense
#3 expired insurance:
value per month: $7,500 / 12 months = 625
month expired between Jan 1st and March 31st: 3
total value f expired insurance: $625 per month x 3 month = 1,875
#4 accured expenses concetps were incurred and we most recognize them
#5 each day $270 times 3 days accrued = 810 total wages accrued
#6 accrued interest expense: principal x rate x time
$21,000 x 0.08 x 3/12 = $420
Broussard is already at full capacity, so its assets must grow at the same rate as projected sales. At the end of 2019, current liabilities were $1.4 million, consisting of $450,000 of accounts payable, $500,000 of notes payable, and $450,000 of accruals. The after-tax profit margin is forecasted to be 4%, and the forecasted payout ratio is 45%. Use the AFN equation to forecast Broussard's additional funds needed for the coming year. Enter your answer in dollars. For example, an answer of $1.2 million should be entered as $1,200,000.
Do not round intermediate calculations. Round your answer to the nearest dollar.
Answers
Answer: $412,600
Explanation:
AFN = Increase in assets - Increase in Liabilities - Addition to Retained Earnings
Increase in Assets
= 5,000,000 * 15%
= $750,000
Increase in Liabilities
For liabilities use only the Accounts payable and Accruals.
= (450,000 + 450,000) * 15%
= $135,000
Additional to Retained Earnings
= After tax Profit * ( 1 - Payout ratio)
= (9,200,000 * 4%) * ( 1 - 45%)
= $202,400
= 750,000 - 135,000 - 202,400
= $412,600
The Dean of Admissions at Pace University is considering a survey of high school seniors in order to design better promotional materials for Pace. Discuss the issues to be considered, the different methods of conducting this survey, and the advantages and disadvantages of each.
Answers
Answer:
different methods can be used here to conduct this survey
1.questionnaire method
2. focus groups
3. interview
Explanation:
Answer 1)
We have several ways of conducting a research. t, the research issue is basically to know how can the university can do better promotion of their their school, theyaretring to put their school on the spotlight on how they can get more students to be interested in the university and what can be done to raise awareness le about the school.
different methods of doing this survey:
1) Questionnaire Method:
in this survey method through the use of Google forms or other survey sites, the students can get a link where they can fill in their preferences or make suggestions by writing. it is quite a popular and simple way of doing a survey.
Advantages
· It has a good rate of Representativeness.
· it is relatively cheap
· data can be gotten in a convenient way
· it gives good Statistical Significance
· its design is inflexible
Disadvantages
· Respondents do not always give exact and fair answers.
· it is difficult to convey emotions through this
· There may be a problem in understanding and interpreting some of the qusetsions
. developing rapport can be quite an issue
2) Focus Group:
Focus group discussions is another method where some of the students and the dean who acts as a moderator, organizes a meeting and everyone is given the opportunity to share useful inputs.
Advantages
· Its easy to see and know the emotions of the respondents based on the issues at hand
. uncovered ideas would be discussed
. gives an opportunity to know the view point of everyone present·
Disadvantages
· people may not want to convey their true thoughts or belief about the discussion on ground.
· people may be reluctant to chip in their perspective especially if it is against tahtof another member
· students would be made to give responses to things they have not seen or experienced
3) Interviews:
the use of Interview is the most reliable way of going about this survey. the dean would be able to generate original data. few students can be interviewed and their inputs can be taken regarding the issue.
Advantages
· adaptability on the side of interviewers
. better response rate
. flexibility on the side of interviewer
disadvantage
time consuming
provides less anonymity
costly
it could be biased
Traditional IRA grows tax free?
True or False
Answers
Answer:
True
Explanation:
What was the non-live show revenue (merchandising + record sales + etc) for the Amzai Brothers during September-December 2019?
Answers
Full question attached
Answer and Explanation:
Answer and explanation attached
Mechanistic vs. Organic Structures Managers taking a contingency approach must consider numerous factors in designing the best kind of structure for their particular organization at that particular time. British behaviorists Tom Burns and G.M. Stalker identified what they call mechanistic and organic structures. Depending on the task environment and a variety of other considerations, the type of organizational structure chosen can be critical to organizational success. This exercise will test your knowledge of the characteristics of each of these types of organizational structure.
Select the most appropriate category (mechanistic or organic structure) for each of the characteristics of organizations.
1. Few rules and procedures
2. Narrow span of control
3. Specialized tasks
4. Many teams or task forces
5. Many rules and procedures
6. Decentralized hierarchy of authority
7. Flatter structure
8. Informal communication
9. Taller structure
10. Centralized hierarchy of authority
11. Wider span of control
12. Shared tasks
13. Formalized communication
14. Few teams or task forces
Category:
a. Mechanistic Organizations
b. Organic Organizations
Answers
Answer:
Mechanistic Organizations Organic Organizations
- Few teams and task force - Few rules and procedures
- Formalized communication - Shared tasks
- Centralized hierarchy of authority - Flatter structure
- Narrow span of control - Many teams and task force
- Many rules and procedures - Decentralized hierarchy of authority
- Specialized task - Informal communication
- Taller structure - Narrow span of control
what will you use for banca/boat to move
Answers
Answer:
a paddle
Explanation:
Using a "paddle" is very important in order to move/propel a boat. Paddling creates a force which goes against the water. This force is faced by an opposite force that is equal and that which allows the boat to move forward.
So as you push the water asides, the boat accelerates. Such technique is deemed efficient when using the boat. Not following the proper technique will not move the boat.
Potential Market – the set of consumers who profess some level of interest in a defined market offer Mass Market – the set of consumers who profess some level of interest in and have the requisite income to a defined market offer Available Market – the set of consumers with the interest, requisite income and access to a defined marketQualified Available Market – the set of consumers with the interest, requisite income, access and qualifications for a defined market offer offerHonda Ltd. of Japan is reviewing the motorcycle market of a Mid-Pacific island. A recent study revealed twenty percent (20%) of the island's 1,000,000 population exhibited an interest in owning a motorcycle. Of those interested, only fifty percent (50%) have the requisite income to purchase a Honda motorcycle. Three (3) Honda dealerships provide the island’s entire population with access to the defined market offer. However, twenty-five percent (25%) of the interested individuals with the requisite income and access to the defined market offer do not meet the island's minimum license age requirement of eighteen (18) years of age.Calculate the number, not percentage, of the people in each of the following levels of market definition. (Show calculations)a. Potential Marketb. Mass Marketc. Available Marketd. Qualified Available Market
Answers
Answer:
A
Potential market
Interested percentage of people x total population
1000000x20%
= 200000
B.
Mass market is potential market x those with requisite income in percentage
= 200000x50%
= 200000x0.5
= 100000
C
Available market is also mass market
= 100000
D.
Qualified market
Available market x minimum qualification in percentage
Percentage of Minimum qualification = 100 - 25%
= 75%
Qualified market = 100000x0.75
= 75000
Since the mid-1980s, Disney's strategic planning group turned the company into a huge and diverse collection of media and entertainment businesses. The sprawling Disney grew to include everything from theme resorts and film studios to media networks, consumer products, and a cruise line. The newly transformed Disney company proved hard to manage and performed unevenly. Recently, Disney disbanded the centralized strategic planning unit, decentralizing its functions to Disney division managers. Since then, Disney's management has helped it perform strongly in a competitive marketplace. Suppose that one of Disney's business units is a chain of sound studios. The studios have low profit potential, and the chain commands a relatively small share of the market. On these grounds, Disney is considering whether to sell the chain.
Required:
What most strongly suggests that Disney should keep the chain instead?
Answers
Answer:
Explanation:
Based on this information I believe that the statement that strongly suggests this is that Disney's management has helped it perform strongly in a competitive marketplace. If the chain of sound studios only holds a relatively small share of the market, it means that the market is very competitive. Therefore, if the Management team has experience in helping such businesses thrive in these competitive marketplaces then they should wait and give it a chance to grow instead of selling. Growing a business takes time which is what Disney should give it by keeping the chain.
Sutton Pointers Corporation expects to begin operations on January 1, 2015; it will operate as a specialty sales company that sells laser pointers over the Internet. Sutton expects sales in January 2015 to total $300,000 and to increase 15 percent per month in February and March. All sales are on account. Sutton expects to collect 66 percent of accounts receivable in the month of sale, 23 percent in the month following the sale, and 11 percent in the second month following the sale.
Required:
a. Prepare a sales budget for the first quarter of 2015.
b. Determine the amount of sales revenue Sutton will report on the first 2015 quarterly pro forma income statement.
c. Prepare a cash receipts schedule for the first quarter of 2015. (Do not round intermediate calculations. Round your answers to the nearest dollar amount.)
d. Determine the amount of accounts receivable as of March 31, 2015. (Do not round intermediate calculations. Round your answers to the nearest dollar amount.)
Answers
Answer:
a. January= $300,000, February = $345,000 and March = $396,750
b. $1,041,750
c. January= $198,000, February = $296,700 and March = $374,205
d. $22,545
Explanation:
Sales Budget [to determine sales revenue]
January = $300,000
February ($300,000 × 1.15) = $345,000
March ($300,000 × 1.15^2) = $396,750
Revenue for the quarter = $1,041,750
Cash Receipts Schedule [to determine receipts and receivables balance]
January February March
Sales $300,000 $345,000 $396,750
Receipt - 66% ($198,000) ($227,700) ($261,855)
Receipt - 23 % - ($69,000) ($79,350)
Receipt - 11 % - - ($33,000)
Total Receipts ($198,000) ($296,700) ($374,205)
Account Receivable $102,000 $48,300 $22,545
Regency Inn leased a rental office in the lobby of its hotel to Americar, a car rental agency. Wagner rented a car from Americar, and while walking through the hotel parking lot to reach her rental car, she was robbed and raped. Wagner sued Regency Inn for damages, alleging that they maintained a public nuisance. A clause in the lease held that Americar was responsible to indemnify Regency Inn for any damages suffered due to the operation of the car rental agency. At the time of the assault on Wagner, Americar was a holdover tenant.
Can Regency Inn claim indemnification under these conditions? Wagner v. Regency Inn Corp., 463 N.W.2d 450 (1990).
Answers
Answer:
The court ruled against both Americar and Regency Inn, and then Regency Inn won its case against Americar. The nuisance case itself is pretty unpleasant, so it's not worth referring to it.
The fundamentals for the ruling against Americar were that they themselves had drafted the lease agreement and that the clause included in the lease agreement by which they agreed to indemnify Regency Inn was valid. The original lease term had already expired, but Americar continued to lease the offices on a monthly basis. Since they never left the place, the clauses in the original agreement were still valid even though the lease changed to a monthly basis. I.e. if you sign a lease contract and after the original contract is over, you continue to lease the same place, then the clauses from the original contract still apply.
The clause stated that Americar was liable for damages that took place on the leased premises or in their proximity, i.e. the area near their offices. The parking lot was considered to be in the proximity of Americar's offices.
What are the limitations and risks of a marketing strategy that does not contemplate the responses of your competitors
Answers
Answer:
Throughout the clarification section following, the definition of the given query is explained.
Explanation:
Right, businesses face fierce competition through competitiveness throughout today's time, because it has become extremely necessary for organizations to develop a marketing campaign that makes companies contemplate consumer response.
After all, if any business marketing plan doesn't somehow anticipate competition reaction, then all these threats can occur:
Someone's brand sales should decline as consumers should choose the brand of their rivals. Your company's market position as well as business growth would decline as well as the brand's rivals will rise. Throughout the life cycle of the product, your company will hit the decline point. Your business's share price could decline.Tasty Subs acquired a delivery truck on October 1, 2021, for $25,600. The company estimates a residual value of $1,600 and a six-year service life. Required: Calculate depreciation expense using the straight-line method for 2021 and 2022, assuming a December 31 year-end.
Answers
Answer:
Depreciation Expense 2021= $1,000
Depreciation Expense 2022= $4,000
Explanation:
Calculation for depreciation expense using the straight-line method for 2021 and 2022
Using this formula
Depreciation = ( Cost − Residual Value )/
Useful Life
Where,
Cost of Truck on October 1,2021= $25,600
Residual Value = $1,600
Useful life of truck = 6 years service life
Let plug in the formula
2021
Depreciation Expense = $25,600 - $1,600 / 6 years * 3/12
Depreciation Expense 2021= $1,000
Note October 1 to 31 December 2021 will give us 3 months
2022
Depreciation Expense=$25,600 - $1,600 / 6 years
Depreciation Expense 2022= $4,000
Therefore the Depreciation Expense for 2021 will be $1,000 while the Depreciation Expense for 2022 will be $4,000
Jeremy is married to Amy, who abandoned him in 2019. He has not seen or communicated with her since April of that year. He maintains a household in which their son, Evan, lives. Evan is age 25 and earns over $6,000 each year. For tax year 2020, Jeremy's filing status is: a.Head of household. b.Surviving spouse. c.Married, filing jointly. d.Married, filing separately.
Answers
Answer: d. Married, filing separately.
Explanation:
From the question, we are informed that Jeremy is married to Amy, who abandoned him in 2019 and that he has not seen or communicated with her since April of that year.
We are further told that he maintains a household in which their son, Evan, lives and that Evan is age 25 and earns over $6,000 each year.
For tax year 2020, Jeremy's filing status is married, filling separately. This is because we are told that Jeremy hasn't has not seen or communicated with her since April. Since they're not divorced, it means they're still married but filing separately.
Appendix 1: Gross and net methods for sales discounts
The following were selected from among the transactions completed by Strong Retail Group during August of the current year:
Aug. 5. Sold merchandise on account to M. Quinn, $7,500, terms 2/10, n/30. The
cost of the merchandise sold was $4,200.
9. Sold merchandise on account to R. Busch., $4,000, terms 1/10, n/30. The
cost of the merchandise sold was $2,100.
15. Received payment on account for the sale of August 5 less the discount.
20. Sold merchandise on account to S. Mooney, $6,000, terms n/eom. The
cost of the merchandise sold was $3,300.
25. Received payment on account for the sale of August 9. 31.Received
payment on account for the sale of August 20.
A. Journalize the August transactions using the gross method of recording sales discounts.
Aug. 5 Accounts Receivable-M. Quinn 7,500
Sales 7,500
Cost of Goods Sold 4,200
Inventory 4,200
Accounts Receivable-R. Busch 4,000
Sales 4,000
Cost of Goods Sold 2,100
B. Journalize the August transactions using the net method of recording sales discounts.
Answers
Answer: Check attachment
Explanation:
A . Journalize the August transactions using the gross method of recording sales discounts
Kindly check the attachment for the solution.
B. Journalize the August transactions using the net method of recording sales discounts.
Check attachment.
Glumhoff's Packaging Department had the following information at July 31. All direct materials are added at the end of the conversion process. The units in ending work in process inventory were only 28% of the way through the conversion process.
Physical Units Direct Materials Conversion Costs
Units accounted for:
Completed and transferred out 120,000
Ending work in process, August 31 35,000
Total physical units accounted for: 155,000
Total equivalent units
Required:
Complete the schedule by computing the total equivalent units of direct materials and conversion costs for the month.
Answers
Answer:
Explanation:
The total equivalent units of direct materials and conversion costs for the month has been computed and attached.
Note that the conversion cost for the ending work in process was calculated as:
= $35,000 × 28%
= $35,000 × 0.28
= $9,800
Check the attachment for further analysis.
when the fed acts as a lender of last resort like it did in the financial crisis of 2007, it is performing its role of
Answers
Answer: C: being the bankers' bank.
Explanation:
The Fed is the Central Bank system of the United States. This means that they have certain duties conferred on them in order to ensure that the financial system of the country does not fail.
One of those duties is to be the Bankers' Bank. This means that the Fed can loan money to Commercial banks just like how Commercial banks do to entities. In acting as the lender of last resort and loaning money to banks so that they could survive the 2007 Financial crises, the Fed was acting as the Bank for the banks.
Bernie and Phil's Great American Surplus store placed an ad in the Sunday Times stating, "Next Saturday at 8:00 A.M. sharp 3 brand new mink coats worth $5,000 each will be sold for $500 each! First come, First served." Marsha LufMin was first in line when the store opened and went directly to the coat department, but the coats identified in the ad were not available for sale. She identified herself to the manager and pointed out that she was first in line in conformity with the store's advertised offer and that she was ready to pay the $500 price set forth in the store's offer. The manager responded that a newspaper ad is just an invitation to negotiate and that the store decided to withdraw "the mink coat promotion." Review the text on unilateral contracts in Section 12(b) of Chapter 12. Decide.
Answers
Answer:
Bennie and Phil broke their unilateral contract by not having the coats available for sale.
Explanation:
Unilateral contracts are defined as one in which the party making an offer are the only ones that obligation to pay for specific performance of an action from the offeree.
For example if a person offers to pay anyone to mow their lawn. Any person that agrees to the job does not have a commitment to perform it.
The only commitment is that the offeror will pay once the lawn is mowed.
In the scenario above Bernie and Phil’s Great American Surplus store placed an ad in the Sunday Timesstating, “Next Saturday at 8:00 A.M. sharp 3 brand new mink coats worth $5,000 eachwill be sold for $500 each! First come, first served.” They are the offerors
Marsha now did her part by being first in line to buy the coat.
By not having the coat available for sale Bernie and Phil have broken their unilateral contract
University Printers has two service departments Maintenance and Personnel and two operating departments Printing and Developing. Management has decided to allocate maintenance costs on the basis of machine-hours in each department and personnel costs on the basis of labor-hours worked by the employees in each.
The following data appear in the company records for the current period:
Maintenance Personnel Printing Developing
Machine-hours ? 455 455 2,590
Labor-hours 315 ? 294 1,491
Department direct cost 11,000 $23,000 $25,000 $23,000
Required: Allocate the service department costs using the reciprocal method. Negative amounts should be indicated by a minus sign. Do not round intermediate calculations.
Answers
Answer:
Machine hour percentages -Allocation of Maintenance Costs
455 + 455 + 2,590 = 3,500 total machine hrs
Personnel = 455 / 3,500 = 13%
Printing = 455 / 3,500 = 13%
Developing = 2,590 / 3,500 = 74%
Labor hr. percentages--Allocation of Personnel costs
315 + 294 + 1,491 = 2,100 total labor hrs.
Maintenance = 315 / 2,100 = 15%
Printing = 294 / 2,100 = 14%
Developing = 1,491 / 2,100 = 71%
Service
Maintenance Personnel Printing Developing
Costs before allocation 11,000 23,000 25,000 23,000
Allocate maintenance costs -11,000 1,430 1,430 8,140
0 24,430
Allocate personnel costs 3664.5 -24430 3420.2 17345.3
Allocate maintenance costs -3664.5 476.39 476.39 2711.73
Allocate personnel costs 71.46 -476.39 66.69 338.24
Allocate maintenance costs -71.46 9.29 9.29 52.88
Allocate personnel costs 1.39 -9.29 1.3006 6.5959
Allocate maintenance costs -1.39 0 0 1.39
Total costs 0.00 0.00 30403.87 51596.13
Workings
Allocate maintenance costs
Personnel = (11000 * 13%) = 1430
Printing = (11000 * 13%) = 1430
Developing = (11000 * 74%) = 8140
Allocate personnel costs
Maintenance = 24430 * 15% =
Printing = (24430 * 14%) =
Developing = (24430 * 71%) =
Allocate maintenance costs
Personnel = (3664.5 * 13%)
Printing = (3664.5 * 13%)
Developing = (3664.5 * 74%)
Allocate personnel costs
Maintenance = (476.39 * 15%)
Printing = (476.39 * 14%)
Developing = (476.39 * 71%)
Allocate maintenance costs
Personnel = (71.46 * 13%)
Printing = (71.46 * 13%)
Developing = (71.46 * 74%)
Allocate personnel costs
Maintenance= (9.29 * 15%)
Printing = (9.29 * 14%)
Developing = (9.29 * 71%)
Piere Imports uses the perpetual system in accounting for merchandise inventory and had the following transactions during the month of October.
Oct. 2 Purchased merchandise at a $4,700 price ($4,606 net), invoice dated October 2, terms 2/10, n/30.
10 Received a credit memorandum toward the return of $850 ($833 net) of merchandise that it purchased on October 2.
17 Purchased merchandise at a $8,800 price ($8,624 net), invoice dated October 17, terms 2/10, n/30.
27 Paid for the merchandise purchased on October 17, less the discount.
31 Paid for the merchandise purchased on October 2. (Payment was mistakenly delayed, which caused the discount to be lost.)
Required:
Prepare entries to record these transactions assuming that Piere Imports records invoices (a) at gross amounts and (b) at net amounts.
Answers
Answer:
Entries and their narrations are posted below
Explanation:
We will record assets and expenses on the debit as they increase during the year and will record liabilities and capital on the credit side as they increase during the year or vice versa.
October 2 Purchased merchandise at a $4,700 price ($4,606 net), invoice dated
GROSS NET
Dr Merchandise inventory $4,700 $4,606
Cr Account payable $4,700 $4,606
October 10 Received a credit memorandum toward the return of $850 ($833 net)
GROSS NET
Dr Account payable $850 $833
C Inventory $850 $833
October 17 Purchased merchandise at a $8,800 price ($8,624 net), invoice dated October 17,
GROSS NET
Dr Merchandise inventory $8,800 $8,624
Cr Account payable $8,800 $8,624
October 27 Paid for the merchandise purchased on October 17, less the discount.
Dr Account payable 8,800
Cr Discount 176
Cr Cash 8,624
October 31 Paid for the merchandise purchased on October 2.
Dr Account payable 4,700
Cr Cash 4,700