A swift moving hawk is moving due west with a speed of 30 m/s; 5.0 s later it is moving due north with a speed of 20 m/s.
(A) What are the magnitude and direction of Δvav vector during this 5 s interval? and
(B) What are the magnitude and direction of vector aav during this 5 s interval?
Answer:
See explanation
Explanation:
Now we have;
vi = (-30, 0) m/s
vf = (0, 20) m/s
Δvav= vf - vi= (30, 20) m/s
magnitude of Δvav= √30^2 + 20^2 = 36.0 m/s
Direction = tan-1(20/30) = 33.69°
For aav
aav= Δvav/t = (30/5, 20/5) = (6,4) m/s^2
magnitude of aav = √6^2 + 4^2 = 7.2 m/s^2
direction of aav = tan-1(4/6) = 33.69°
Describe an experiment to show that the maximum attractive property is at the poles of
a magnet?
Answer:
Take a bar magnet and place a steel pin at some distance. ... Now, bring the steel pin near the pole of the bar magnet. We notice that pin sticks to the magnet. This experiment shows that maximum magnetic force acts at the poles of the magnet.
Explanation:
hope that is help
Which of the following is a mood disorder?
phobic disorder
bipolar disorder
schizophrenia
conversion disorder
Answer:
bipolar disorder
Explanation:
bipolar disorder, is previously known as manic depression, is a mental disorder characterized by periods of depression and periods of abnormally elevated mood that last from days to weeks.
How does the water cycle influence weather in central Wisconsin?
Answer:
The water cycle describes how water evaporates from the surface of the earth, rises into the atmosphere, cools and condenses into rain or snow in clouds, and falls again to the surface as precipitation.The water cycle involves the exchange of energy, which leads to temperature changes.
Answer:
so be more specific please
You have now seen examples during lecture on how to calculate the electric field for a line of charge and a ring of charge - both uniformly distributed. This activity will ask you to solve for the electric field, on-axis, of a uniformly-charged disk sitting in the yz plane. Below is a picture of the situation of interest. Note: Treat it as a totally flat disk and ignore its thickness in the x direction. Also, let x be the distance between the center of the disc and point P.
Answer:
1/4πε₀[Hx/ (√x² + b²)^3/2]i.
Explanation:
So, without mincing words let's dive straight into the solution to the question above. There is need to determine the electric field on-axis of a uniformly-charged disk sitting.
The electric field in the x-component, dεₓ = 1/4πε₀[H/ x² + b²] cos .
Thus, the total electric field in the x-component, εₓ = 1/4πε₀ [ xdH/ (x^2 + b^2)^3/2.
Therefore, the electric field = 1/4πε₀ [ xdH/ (x^2 + b^2)^3/2i.
Where x=0
1.How much work does it take to get a 2Kg ball moving 15m/s if it starts from rest?
2. If a force of 235N was added to the ball, through what distance would this force have to act to give the ball a velocity of 15m/s
Place the left charge at the 2 cm position and the right one at the 4 cm position. Vary the left and right charge to the values provided below and record the resulting forces.
Left Charge Righ Charge Resulting force(N)
1μC 4μC
4μC 1μC
2μC 2μC
1μC 2μC
1μC 8μC
2μC 8μC
Answer:
Explanation:
Force between two charges can be expressed as follows
F = k q₁ q₂ / d²
q₁ and q₂ are two charges , d is distance between them , k is a constant whose value is 9 x 10⁹
distance between charges is fixed which is 4 -2 = 2 cm = 2 x 10⁻² m
force between 1μC and 4μC
= 9 x 10⁹ x 1 x 4 x 10⁻¹² / ( 2 x 10⁻² )²
= 9 x 10 = 90 N
force between 4μC and 1μC
= 9 x 10⁹ x 4 x 1 x 10⁻¹² / ( 2 x 10⁻² )²
= 9 x 10 = 90 N
force between 2μC and 2μC
= 9 x 10⁹ x 2 x 2 x 10⁻¹² / ( 2 x 10⁻² )²
= 9 x 10 = 90 N
force between 1μC and 2μC
= 9 x 10⁹ x 1 x 2 x 10⁻¹² / ( 2 x 10⁻² )²
= 4.5 x 10 = 45 N
force between 1μC and 8μC
= 9 x 10⁹ x 1 x 8 x 10⁻¹² / ( 2 x 10⁻² )²
= 18 x 10 = 180 N
force between 2μC and 8μC
= 9 x 10⁹ x 1 x 8 x 10⁻¹² / ( 2 x 10⁻² )²
= 36 x 10 = 360 N
Left Charge Right Charge Resulting force(N)
1μC 4μC 90 N
4μC 1μC 90 N
2μC 2μC 90 N
1μC 2μC 45 N
1μC 8μC 180 N
2μC 8μC 360 N
In the figure, if Q = 52 µC q =10 µC and d = 55 cm, what is the magnitude of the electrostatic force on q?
Answer:
F = 15.47 N
Explanation:
Given that,
Q = 52 µC
q = 10 µC
d = 55 cm = 0.55 m
We need to find the magnitude of the electrostatic force on q. The formula for the electrostatic force is given by :
[tex]F=k\dfrac{q_1q_2}{d^2}\\\\F=9\times 10^9\times \dfrac{52\times 10^{-6}\times 10\times 10^{-6}}{(0.55)^2}\\\\F=15.47\ N[/tex]
So, the magnitude of the electrostatic force is 15.47 N.
The magnitude of electrostatic force will be "15.47 N".
Electrostatic forceAccording to the question,
Charges, Q = 52 μC
q = 10 μC
Distance, d = 55 cm, or
= 0.55 m
Constant, k = 9 × 10⁹
We know the relation,
→ Electrostatic force, F = k [tex]\frac{q_1 q_2}{d^2}[/tex]
By substituting the values, we get
= 9 × 10⁹ × [tex]\frac{10\times 10^{-6}}{(0.55)^2}[/tex]
= 15.47 N
Thus the above answer is correct.
Find out more information about Electrostatic force here:
https://brainly.com/question/11681616
A bar magnet was placed underneath a sheet of paper where a pile of iron filings sits. In the presence of the energy stored in the magnetic field, the iron filings arranged themselves, creating lines of force. How do the energy and the lines of force change when a stronger bar magnet is used?
The answer is "The energy increases, and the lines of force are denser"
Answer:
The energy increase, and the lines of force are denser
Explanation:
The rest of the answers
1.) The field energy will increase.
3.) It points toward the field of earths magnetic poles.
4.) l, ll, and lll only
5.) ll, lV, l, lll
Based on the information given, the energy and the lines of force change as the energy increases, and the lines of force are dense.
Energy
In physics, it should be noted that energy is the quantitative property which must be transferred to a body or physical system to perform work on the body.
From the information, the bar magnet was placed underneath a sheet of paper where a pile of iron filings sits and in the presence of the energy stored in the magnetic field, the iron filings arranged themselves, creating lines of force. Therefore, when a stronger bar magnet is used, the energy increases and the lines of force are denser.
Learn more about energy on:
https://brainly.com/question/13881533
A 5 cm diameter orfice discharges fluid from a tank with a head of 5 meters. The discharge rate, Q, is measured at 0.015 m^3/s. The actual velocity at the vena contracta is 9 m/s. The coefficient of discharge is nearest to:________
Answer:
[tex]\mathbf{ C_d = 0.86}[/tex]
Explanation:
Given that:
diameter of the orifice D = 5 cm = 5 × 10⁻² m
discharge rate Q = 0015 m³/s
Actual velocity V = 9 m/s
By using the formula
[tex]Q = C_d \times A \times \sqrt{2gh}[/tex]
where;
[tex]v = \sqrt{2gh}[/tex] = 9 m/s
[tex]Q = C_d \times A \times v}[/tex]
where;
[tex]A = \dfrac{\pi D^2}{4}[/tex]
[tex]A = \dfrac{\pi (5 \times 10^{-2} ) ^2}{4}[/tex]
[tex]A = 0.00196 \ m^2[/tex]
Again,
[tex]Q = C_d \times A \times v}[/tex]
[tex]0.015 = C_d \times 0.00196 \times 9[/tex]
[tex]C_d = \dfrac{0.015 }{ 0.00196 \times 9}[/tex]
[tex]\mathbf{ C_d = 0.86}[/tex]
Hence, the coefficient of discharge [tex]\mathbf{ C_d = 0.86}[/tex]
In the equation for the gravitational force between two objects, which quantity must be squared?
•mi
•m2
•G
•d
Answer:
d
Explanation:
The quantity that must be squared in the equation of gravitational force is distance d.
According to the universal gravitational law, the square of the distance between two objects is inversely proportional to the force of gravity.
Therefore, the quantity to be squared is dThe formula is given as:
Fg = [tex]\frac{G m_{1} m_{2} }{d^{2} }[/tex]
So d is the quantity that must be squared
A motor is used to lift a 10 kg mass 2 m above the ground in 4 s. If the power input to the motor is 100 W. what is the efficiency of the motor?
(Show Work)
Answer:
98%
Explanation:
Given parameters
Mass of motor = 10kg
Height = 2m
Time = 2s
Power input = 100w
Unknown
Efficiency = ?
Solution
Efficiency is the percentage of the power output to the power input.
Power is the rate at which work is done.
Power output = mass x g x height / time
g is the acceleration due to gravity
Power output = 10x 2 x 9.8 / 2 = 98W
Efficiency = power output/ power input x 100
Efficiency = 98/100 x 100 = 98%
If an atom of oxygen has an atomic number of eight that means...…
E. there are 8 protons
F. there are 8 neutrons
G. it weighs 8 amu
H. it is in group 8
A girl walks 20.0 m east then 70.0 meters north. What is the girl’s displacement (mag. And direction)? What is the girl’s distance?
Explanation:
Given that,
A girl walks 20.0 m east then 70.0 meters north.
Displacement is the shortest path covered by an object. Let it is d. It is calculated as :
[tex]d=\sqrt{20^2+70^2} \\\\=72.80\ m[/tex]
For direction,
[tex]\theta=\tan^{-1}(\dfrac{70}{20})\\\\\theta=74.05^{\circ}[/tex]
Girl's distance = 20 m + 70 m
= 90 m
Hence, this is the required solution.
A 0.1ohm resistor has power rating 5w. is the resistor safe when conducting a current of 10A.
Answer:
1.5 Amp is rated for 5 W so it would not be possible
Precisely 1.00 s after the speeder passes, the police officer steps on the accelerator; if the police car's acceleration is 2.70 m/s2 , how much time passes after the police car is passed by a speeder and before the police car overtakes the speeder (assumed moving at constant speed)
Answer:
t= 16.75 s
Explanation:
We will solve this exercise using the kinematic expressions
corridor that goes at constant speed, suppose that its speed is v₁ = 20 m/s, it does not appear in the statement, we start counting the time when it passes the policeman.
x₁ = v₁ t
The policeman starts from rest, so his initial velocity is zero and he has an acceleration a = 2.70 m /s², to use the same time counter we take into account that the policeman left at = 1.00 s after passing the corridor
x₂ = v₀ (t-t₀) + ½ a (t-t₀)²
x₂ = ½ a (t-1)²
at the point where the two meet, the position must be the same
x₁ = x₂
v₁ t = ½ a (t-1)²
(t-1)² = [tex]\frac{2 v_1 t}{a}[/tex]
t² - 2t + 1 - \frac{2 v_1 t}{a} +1 = 0
t² - 2(1 + [tex]\frac{v_1}{a}[/tex]) t +1
let's we solve the second degree equation
t² - 2 ( 1 + [tex]\frac{20}{2.7}[/tex]) t + 1=0
t² - 16.81 t +1=0
t = [ 16.81 ± [tex]\sqrt{ 16.81^2 - 4 )}[/tex] ] /2
t = [16.81 ± 16.695]/2
t₁= 16.75 s
t2= 0.06 s
Time t₂ is less than the reaction time of humans, so the correct answer is the first time
t= 16.75 s
Many scientific studies have found that colds are caused by viruses. What is this? *
Fact
Interpretation
Analysis
Opinion
Answer:
Analysis
Explanation:
Because you must Analysis each and every cold too find out which virus caused this.
It’s weird because Interpretation and Analysis have the meaning of examination
7Which of the following terms describes how glaciers move?
A Quickly
B Gradually
C Aggressively
D Rapidly
Answer:
D is the answer I think (0 w 0 )
Explanation:
The glaciers move gradually. Hence, option (C) is correct.
What is glacier?A glacier is a long-lasting mass of heavy ice that is perpetually moving. When the ablation of snow is greater than the accumulation over a long period of time, frequently centuries, a glacier forms.
As it slowly flows and deforms under forces brought on by its weight, it gains distinctive features like crevasses and seracs. Cirques, moraines, and fjords are the result of the erosion of rock and debris from its substrate as it travels.
The considerably thinner sea ice and lake ice that form on the surface of bodies of water are not the same as glaciers, which form only on land and may flow into water bodies.
The huge ice sheets, commonly referred to as "continental glaciers," in the polar areas of the planet contain 99 percent of the planet's glacial ice.
Learn more about glaciers here:
https://brainly.com/question/19709729
#SPJ2
give two examples of uses of the expansion and contraction of materials
if we hold a very hot glass tumbler under cold water, it cracks. This is because the outer surface of the glass comes in direct contact with cold water and contracts more as compared to the inner surface. We observed that water expanded on heating.
Railway tracks consist of two parallel metal rails joined together. Small gaps, called expansion gaps, are deliberately left between the rails as there is an expansion of the rails in hot weather. Water expands on heating.
A spring with k = 58 N/m hangs vertically next to a ruler. The end of the spring is next to the 17-cm mark on the ruler.
If a 2.5-kg mass is now attached to the end of the spring, and the mass is allowed to fall, where will the end of the spring line up with the ruler marks when the mass is at its lowest position?
Express your answer to two significant figures and include the appropriate units.
Answer:
Explanation:
The force occurring on a spring F = mg
If x should be the expansion in the spring.
Then F = mg = -kx
where;
[tex]x = \dfrac{mg}{k}[/tex]
[tex]x = \dfrac{2.5 \ kg*9.81 \ m/s^2 }{58 \ N/m}[/tex]
x = 0.423 m
x = 42.3 cm
The final reading of the spring when the end of the spring lines up with the ruler mark is = 42.3 cm + 17 cm
= 59.3 cm
≅ 60 cm
Ashudent drops an object from rest above a force plate that records information about the force exerted on the object as a function of time during the time interval in which the objects in contact with the force plate Which of the following measurements should the student take in addition to the measurements from the force platit. to determine the change in momentum of the object from immediately before the collision to immediately after the collision?
A The mass of the object
B The final speed of the object MOH 5000
C The distance fallen by the object
D The student has enough information to make the determination
Answer:
A The mass of the object
Explanation:
i hope it's helpful
i’ll mark you brainlist :)
Energy stored in the nucleus of an atom which releases energy through
fission or fusion *
Many scientific studies have found that colds are caused by viruses. What is this? *
Fact
Interpretation
Analysis
Opinion
An Egyptian pyramid contains approximately 1.95 million stone blocks. The average weight of each block is 2.55 tons. What is the weight of the pyramid in pounds?
Answer:
More than 2,300,000 limestone and granite blocks were pushed, pulled, and dragged into place on the Great Pyramid. The average weight of a block is about 2.3 metric tons (2.5 tons).
some waves can only travel through matter. What is this matter called?
PLS HELP ME!
A motorist is traveling 40ms-¹ and applies brakes and slow down at a rate of 2ms-² the available distance for the the motorist to stop is 400m will the motorist be able to stop?
Answer:
[tex] \underline{ \boxed{ yes}}\\[/tex]
Explanation:
[tex]given : initial \: velocity \: (u )= 40 {ms}^{ - 1} \\ given : final \: velocity \: (u )= 0 {ms}^{ - 1} \\ given : - (acceleration) \: (a_r) = 2 {ms}^{ - 2} \\ given : distance \: (s) \: = \: ? : \\ but \: {v}^{2} = {u}^{2} + 2( a)s\\ {0}^{2} = {40}^{2} + 2( - 2)s \\ - {40}^{2} = - 4s \\ s = \frac{ - {40}^{2} }{ - 4} \\ s = \frac{1600}{4} \\s = 400 \: m[/tex]
Kieran caught 18 more Pokémon on Saturday than
Noah did. Kieran caught 53 Pokémon. Write and solve
an equation to find how many Pokémon, p, Noah
caught on Saturday.
Answer:
Noah caught 35 Noah on Satuday.
Explanation:
Given that,
Kieran caught 53 Pokemon
Kieran caught 18 more Pokémon on Saturday than Noah did.
Let Noah caught x Pokémon on Saturday.
ATQ,
18 + x = 53
Thie is the equation that can be used to find the value of x.
Subtract 18 from both sides.
18 + x -18 = 53 - 18
x = 35
Hence, Noah caught 35 Noah on Satuday.
b. What would the momentum be if the mass of the bowling ball were doubled and its velocity still was 3 m/s?
Answer:
Twice.
Explanation:
The momentum of an object is given by :
p = mv
Where
m is mass and v is the velocity
If the mass of the ball were doubled, m'=2m and v'=v=3 m/s
New momentum,
p'=m'v'
p'=2m × v
p'=2mv
or
p'=2p
So, the new momentum becomes twice the initial momentum.
please help thank you
Answer:
[tex]\theta \approx 59.036^{\circ}[/tex], [tex]T_{2} \approx 23.324\,N[/tex]
Explanation:
First we build the Free Body Diagram (please see first image for further details) associated with the mass, we notice that system consist of a three forces that form a right triangle (please see second image for further details): (i) The weight of the mass, (ii) two tensions.
The requested tension and angle can be found by the following trigonometrical and geometrical expressions:
[tex]\theta = \tan^{-1} \frac{W}{T_{2}}[/tex] (1)
[tex]T_{1} = \sqrt{W^{2}+T_{2}^{2}}[/tex] (2)
Where:
[tex]W[/tex] - Weight of the mass, measured in newtons.
[tex]T_{1}[/tex], [tex]T_{2}[/tex] - Tensions from the mass, measured in newtons.
If we know that [tex]W = 20\,N[/tex] and [tex]T_{2} = 12\,N[/tex], then the requested values are, respectively:
[tex]\theta = \tan^{-1} \frac{20\,N}{12\,N}[/tex]
[tex]\theta \approx 59.036^{\circ}[/tex]
[tex]T_{2} = \sqrt{(20\,N)^{2}+(12\,N)^{2}}[/tex]
[tex]T_{2} \approx 23.324\,N[/tex]