an organic compound that contains only carbon and hydrogen and a triple bond (all the other bonds are single bonds) is classified as:
a. alkane
b. alkene
c. alkyne
d. arene

Answer:

3.85

Explanation:

Calculate molar mass, starting with each element, then find grams per mole, then convert.

Answer:

Your answer would be D, they are all non-renewable energy sources. Hope this helps!

Answer:

D. They are all nonrenewable energy sources.

Answer:

32

Explanation:

59-27

the equation is not present.

Answer: The chemical formula of this precipitate is [tex]Mg_{3}(PO_{4})_{2}[/tex].

Explanation:

An equation which depicts the chemical reaction of substances in the form of chemical formulas is called a chemical equation.

For example, chemical equation for an aqueous solution of sodium phosphate [tex](Na_{3}PO_{4})[/tex] and an aqueous solution of magnesium sulfate [tex](MgSO_{4})[/tex] are mixed, a precipitate forms is as follows.

[tex]3MgSO_{4}(aq) + 2Na_{3}PO_{4}(aq) \rightarrow Mg_{3}(PO_{4})_{2}(s) + 3Na_{2}SO_{4}(aq)[/tex]

Here, trimagnesium phosphate is the precipitate. The chemical formula of this precipitate is [tex]Mg_{3}(PO_{4})_{2}[/tex].

Thus, we can conclude that the chemical formula of this precipitate is [tex]Mg_{3}(PO_{4})_{2}[/tex].

Answer:

S.G = 0.79.

Explanation:

Hello there!

In this case, according to the given information in the problem, it turns out possible for us to calculate the specific gravity of this alcohol by simply dividing its density, 0.79 g/mL by that of the water, 1 g/mL just as a reference for us to work with:

[tex]S.G=\frac{\rho _{alc}}{\rho _w}[/tex]

Thus, we plug in the densities to obtain:

[tex]S.G=\frac{0.79g/mL}{1g/mL}\\\\S.G=0.79[/tex]

Which is dimensionless as g/mL is cancelled out due to its presence on both top and bottom of the previous formula.

Regards!

Answer: The concentration of solution made by the student is 1 M.

Explanation:

Molarity is defined as the amount of solute expressed in the number of moles present per liter of solution. The units of molarity are mol/L.

The formula used to calculate molarity:

[tex]\text{Molarity of solution}=\frac{\text{Number of moles of solute}\times 1000}{\text{Volume of solution (mL)}}[/tex]       .....(1)

Given values:

Moles of solute = 0.5 moles

Volume of solution = 500 mL

Plugging values in equation 1:

[tex]\text{Molarity of solution}=\frac{0.5\times 1000}{500}\\\\\text{Molarity of solution}=1M[/tex]

Hence, the concentration of solution made by the student is 1 M.

Answer:

0m

Explanation:

2m up - 2m down =0m

Answer:

1/3 dilution : 1 volume of stock solution + 2 volumes of diluent

Explanation:

Concentrated solution = 0.300 NaOH

Diluted solution = 0.100 NaOH

The dilution factor is : 0.100/0.300 = 1/3

Thus, we have to dilute three times the stock solution. For this, we take 1 volume of stock solution and then we add 2 volumes of diluent. As result, we will have 1 volume of stock solution in a total of 3 volumes. For example, we take 1 mL of 0.300 NaOH and then we add 2 mL of diluent (0.300 NaCl). The final concentration after dilution will be:

Cd = 0.300 M x 1 mL/3 mL = 0.100 M

[tex]\huge\mathsf{\red{\underline{\underline{Answer}}}}[/tex]

[tex]{\green{\dashrightarrow}}[/tex]When you mix the rubbing alcohol with water, the latter's molecules make hydrogen bonds with the water molecules. The alcohol dissolves in the water to form a homogenous solution, so you cannot distinguish the alcohol and the water anymore.

The wavelength of the light having a frequency of 7.21×10¹⁴ Hz is 416 nm (Option C)

Wavelength and frequency are related to the velocity of a wave according to the following formula:

Velocity (v) = wavelength (λ) × frequency (f)

v = λf

With the above formula, the wavelength of the light can be obatined. Details below.

From the question given above, the following data were obtained:

Velocity (v) = wavelength (λ) × frequency (f)

3×10⁸ = wavelength × 7.21×10¹⁴

Divide both sides by 7.21×10¹⁴

Wavelength = 3×10⁸ / 7.21×10¹⁴

Wavelength = 416×10⁻⁹ m

Multiply by 10⁹ to express in nm

Wavelength = 416×10⁻⁹ × 10⁹

Wavelength = 416 nm

Thus, we can conclude that the wavelength is 416 nm (Option C)

Learn more about wavelength:

https://brainly.com/question/13659036

#SPJ1

Answer:

a. 0.4539g benozic acid

b. 60.29% of benzoic acid in the solid sample

Explanation:

The benzoic acid reacts with NaOH as follows:

C6H5COOH + NaOH → C6H5COONa + H2O

Where 1 mole of the acid reacts per mole of NaOH

The NaCl doesn't react with NaOH

To solve this question we must find the moles of NaOH added = Moles of benzoic acid. With the moles of the acid and its molar mass (C6H5COOH = 122.12g/mol) we can find the mass of the acid and its mass percentage:

a. Moles NaOH = Moles Benzoic acid:

24.78mL = 0.02478L * (0.150mol / L) = 0.003717 moles Benozic acid

Mass benzoic acid:

0.003717 moles Benozic acid * (122.12g / mol) = 0.4539g benozic acid

b. Mass percentage is:

0.4539g / 0.7529g * 100 = 60.29% of benzoic acid in the solid sample

Answer:

C

Explanation:

Reactant part has 2 Mg and 2 O, product part has 2 Mg and 2 O

Answer:

1. Empirical formula => C₂H₃O

2. Molecular formula => C₆H₉O₃

Explanation:

From the question given above, the following data were obtained:

Mass of compound = 50 g

Mass of Carbon = 24.66 g

Mass of Hydrogen = 3.43 g

Molecular weight of compound = 146.0 amu

Empirical formula =?

Molecular formula =?

Next, we shall determine the mass of oxygen in the compound. This can be obtained as follow:

Mass of compound = 50 g

Mass of C = 24.66 g

Mass of H = 3.43 g

Mass of O =?

Mass of O = mass of compound – ( mass of C + mass of H)

= 50 – (24.66 + 3.43)

= 50 – 28.09

= 21.91 g

1. Determination of the empirical formula.

Mass of C = 24.66 g

Mass of H = 3.43 g

Mass of O = 21.91 g

Divide by their molar mass

C = 24.66 / 12 = 2.055

H = 3.43 / 1 = 3.43

O = 21.91 / 16 = 1.369

Divide by the smallest

C = 2.055 / 1.369 = 2

H = 3.43 / 1.369 = 3

O = 1.369 / 1.369 = 1

Therefore, the empirical formula of the compound is C₂H₃O

2. Determination of the molecular formula.

Molecular weight of compound = 146.0 amu

Empirical formula => C₂H₃O

Molecular formula =?

Molecular formula = [C₂H₃O]ₙ = molecular weight

Thus,

[C₂H₃O]ₙ = 146

[(12×2) + (3×1) + 16]n = 146

[24 + 3 + 16]n = 146

43n = 146

Divide both side by 43

n = 146 / 43

n = 3

Molecular formula = [C₂H₃O]ₙ

Molecular formula = [C₂H₃O]₃

Molecular formula = C₆H₉O₃

science is all about the nature.

it is the study of squaring knowledge

Answer:

0.02.55M

Explanation:

Concentration = moles/ volume(L)

10mL= 0.01L

Concentration (M)= 0.0255 mol / 0.01L

Concentration (M)= 0..255M

The given question is incomplete, the complete question is:

A chemist must dilute 54.1 mL of 20.2 M aqueous silver perchlorate (AgC102) solution until the concentration falls to 3.00 M. He'll do this by adding distilled water to the solution until it reaches a certain final volume. Calculate this final volume, in liters. Round your answer to 3 significant digits.

Answer:

The correct answer is 0.364 L.

Explanation:

A solution is made less concentrated by diluting it with a solvent. There is no change in the number of moles when more solvent is added to the solution. In case, if the solution is diluted from V1 to V2, a change is noticed in the molarity of the solution based on the given equation,

M1V1 = M2V2

In the given case, the V1 or the volume of the original solution is 54.1 ml, M1 or the molarity of the original solution is 20.2 M.

The M2 or the molarity of the diluted solution is 3.00 M, there is a need to find the V2 or the volume of the diluted solution.

Now by putting the values in the equation we get,

= 20.2M * 54.1 ml = 3.0 M * V2

V2 = 364.27 ml

It is known that 1000 ml is equivalent to 1L, therefore, 1 ml = 0.001 L

Now, the value of V2 will be,

= 364.27 * 0.001 L = 0.36427 L or 0.364 L

Answer:

Bacteria

Explanation:

Answer:

sodium fluoride

Explanation:

When we add sodium fluoride to a solution of a given mixture, we get barium fluoride from Ba, which would be an insoluble salt, and silver fluoride from Ag, which would be a soluble salt. 

The solubility rule will be used to determine the barium salt that forms as a precipitate and leaves Ag+ salt in the solution.

From the following equations, we will see that the precipitate is formed in Ba but Ag remains dissolved in the solution.

[tex]Ba(NO_3)_2{(aq)} + 2NaF_{(aq)} \to BaF_{2(s)} +2NaNo_{3(aq)}[/tex]

[tex]AgNo_{3(aq)} +NaF_{(aq)} \to AgF_{(aq)} + NaNO_{(aq)}[/tex]

Answer:

NaOH is the limiting reactant.

Explanation:

Hello there!

In this case, according to the given information, it turns out firstly necessary to write out the chemical reaction between NaOH and HCl:

[tex]NaOH+HCl\rightarrow NaCl+H_2O[/tex]

Thus, since they react in a 1:1 mole ratio; we can now calculate the moles of each substance by using their volumes and molarities:

[tex]n_{NaOH}=0.0250L*0.81mol/L=0.02025molNaOH\\\\n_{HCl}=0.0650L*0.33mol/L=0.02145molHCl[/tex]

Now, since NaOH is in a fewer proportion, we infer just 0.02025 moles of HCl are consumed so that 0.0012 moles of this acid remain unreacted; in such a way, we infer that the NaOH is the limiting reactant for this reaction.

Regards!

Answer:

Your answer will be b(molten material from the outer core makes its way to the surface of earth)

Explanation:

Answer:

C

Explanation:

I'm pretty sure molten material comes from the inner core. I think you can search up this though, try to find where molten material comes from. Goodluck!

Answer:

Axial position

Explanation:

In the reduction of 4-tert-butylcyclohexanone with sodium borohydride, the major product has the tert-butyl group in the equatorial position and the alcohol in the axial position.

The reason for this is that, axial bonds are parallel to each other. If  substituents are larger than hydrogen, they experience a greater steric crowding in axial compared to the equatorial position. Therefore, many substituted cyclohexane compounds prefer a conformation in which the larger substituents are in equatorial position.

Answer:

v = m/d

Explanation:

To know which option is correct, we shall rearrange the the formula of density. This can be obtained as follow:

The density of a substance is defined as the mass per unit volume of the substance. Mathematically, it is expressed as:

Density (d) = mass (m) / volume (v)

d = m/v

Make m the subject

d = m/v

Cross multiply

m = dv

Next, made v the subject

d = m/v

Cross multiply

dv = m

Divide both side by d

v = m/d

SUMMARY:

From the density formula (i.e d = m/v) we obtained:

m = dv

v = m/d

Therefore, option v = m/d gives the correct answer to the question.

Answer:

4.42 x 10^24

Explanation:

Answer: A Molecular Approach, 2/e. Mole ratio. 2 mol C4H10 : 13 mol O2 : 8 mol CO2 : 10 mol H2O. ❖ 2 molecules of C4H10 react ... of aluminum and 73.15 g of sulfur are combined to form aluminum sulfide according to the equation:.

Explanation:

b

b357

Answer:

2Fe +3 H2SO4  Fe2(SO4)3 + 3H2

2*56g. 3*98g➔400g. +6g

we have

2*56 g of Fe gives 400g of iron (III ) sulfate

now

100g of Fe gives=400/112*100=357g of iron (III ) sulfate

[tex]\:[/tex]

B is your answer.!

Answer:

Explanation:

The pH of a solution can be found by using the formula

[tex]pH = - log [ {H}^{+} ][/tex]

From the question we have

[tex]ph = - log(2.58 \times {10}^{ - 6} ) \\ = 5.58838[/tex]

We have the final answer as

Hope this helps you