Answer:
[tex]\boxed {\boxed {\sf a\approx 2.7 \ m/s^2}}[/tex]
Explanation:
Force is equal to mass times acceleration.
[tex]F=m*a[/tex]
By dividing both sides by m, we rearrange the formula for a (acceleration).
[tex]\frac{F}{m} =a[/tex]
The force is 6.2 Newtons, but we can convert the units to make the problem easier later on.
A Newton is equal to 1 kg*m/s², so 6.2 N is equal to 6.2 kg*m/s².The mass is 2300 grams, but we need to convert it to kilograms.
To convert grams to kilograms, divide by 1,0002300 g/1000= 2.3 kg[tex]F= 6.2 \ kg*m/s^2\\m=2.3 \ kg[/tex]
Substitute the values into the formula.
[tex]a=\frac{6.2 \ kg*m/s^2}{2.3 \ kg}[/tex]
Divide. Note that the kilograms or "kg" will cancel each other out (this is why we converted the units).
[tex]a=\frac{6.2 \ m/s^2}{2.3 \ }[/tex]
[tex]a=2.69565217 \ m/s^2[/tex]
Round to the nearest tenth. The 9 in the hundredth place tells us to round up to 2.7
[tex]a\approx 2.7 \ m/s^2[/tex]
The acceleration is about 2.7 meters per second squared.
hich of the following best describes a person doing science?
A.
Dominick uses a computer to do his math homework.
B.
Lindsay measures the sizes of the craters on the Moon.
C.
Isabel invents a new kind of doorknob.
D.
Murray randomly predicts the result of a coin toss.
Answer:
I think it is answer B. what grade are you in? im in 7th.
Explanation:
What are the other properties of pure substance
Answer:
Characteristics and Properties Of Pure Substances
Pure substances are mostly homogeneous in nature containing only one type of atoms or molecules. These substances mainly have a constant or uniform composition throughout. The substances have fixed boiling and melting points.
Explanation:
they have fixed boiling and melting
Mechanical weathering does not change a rock’s
A
shape.
B
size.
C
appearance.
D
composition.
Answer:
C
Explanation:
Answer:
B: Size
Explanation: It can break it into smaller pieces but not change its composition.
Which element has three electron shells and 4 valence electrons?
Silicon
Carbon
Gallium
Argon
Answer: Silicon
Explanation:
For something to have 4 valence electrons, it must be in the 14th column, which elimates gallium and argon for the possible answers. For somethign to have 3 electron shells, it must be in the third row of the periodic table which means the answer is silicon.
Answer:
Gallium
Explanation:
I believe this is the answer if not then the only other option is boron but anyways the answer is Gallium
11. Which of the following equations shows a
synthesis reaction?
A
B
C
D
Answer: D
Explanation:
What volume of hydrogen gas at STP will be produced from 36.7 g of magnesium reacting with an excess amount of hydrochloric acid?
Answer:
V = 34.3 L
Explanation:
Given data:
Volume of hydrogen produced = ?
Mass of magnesium = 36.7 g
Temperature and pressure = standard
Solution:
Mg + 2HCl → MgCl₂ + H₂
Number of moles of magnesium:
Number of moles = mass/molar mass
Number of moles = 36.7 g/ 24 g/mol
Number of moles = 1.53 mol
Now we will compare the moles of magnesium with hydrogen.
Mg : H₂
1 : 1
1.53 : 1.53
Number of moles of hydrogen produced = 1.53 mol
Volume of hydrogen:
PV = nRT
V = nRT / P
V = 1.53 mol × 0.0821 atm.L/mol.K × 273 K/ 1 atm
V = 34.3 L
If a stick of dynamite explodes, the
chemical energy changes into what?______________
potential energy, air and clouds
potential energy and physical
energy
kinetic energy, heat and light
Kinetic energy and precipitation
Answer:
kinetic energy, heat and light i'm pretty sure
PLZ HELP YOUVE GOT 10 MINUTES AND I WILL MARK YOU BRAINIEST OR WHATEVER ITS CALLED, it’s the last question on my test
Answer:
The answer is Chromatography, I believe.
Explanation:
Chromatography is the method used to separate the color pigments in ink or other liquids.
Derive an expression for the molar mass of a gas starting with its density?
Answer:
The relationships between molar mass and density for a monoatomic gas can be easy.
The Ideal Gas Law, PV = nRT can be arranged so that n moles equals the mass/molar mass of the gas to become,
PV =
M
mRT
where m is the mass and M is the molar mass.
M =
PV
mRT
, if you hold the temperature of the gas constant the equation reduces to the Boyle's law or
PV
m
The mass will be constant assuming the container is closed and so the gas cannot be escaped so, PV will be constant.
D =
V
m
and M =
PV
mRT
M =
P
DRT
The higher the density of the gas the higher the molar mass and vice versa.
Explanation:
4. Which of the following demonstrates an organ providing a force?
A. The kidney filters waste from blood.
B. The heart contracts and expands to move blood.
C. he eye transmits information to the brain
D. The skin protects other organs from damage.
Answer:
Um uhhhh um 4d
Explanation:
The original solution used to make the solutions for the standard curve was prepared by dissolving 2.60g of CoCl2 (molar mass 130.g/mol ) in enough water to make 100.mL of solution. What is the molar concentration of the solution?
Answer:
0.200 M
Explanation:
Step 1: Given data
Mass of CoCl₂ (m): 2.60 gMolar mass of CoCl₂ (M): 130 g/molVolume of solution (V): 100 mLStep 2: Calculate the moles (n) of CoCl₂ (solute)
We will use the following expression.
n = m/M
n = 2.60 g/(130 g/mol)
n = 0.0200 mol
Step 3: Convert "V" to liters
We will use the conversion factor 1 L = 1000 mL.
100 mL × 1 L/1000 mL = 0.100 L
Step 4: Calculate the molarity of CoCl₂
We will use the definition of molarity.
[CoCl₂] = n/V(L)
[CoCl₂] = 0.0200 mol/0.100 L
[CoCl₂] = 0.200 M
The molar concentration of the solution is 0.2 M.
First, we must calculate the number of moles of CoCl2 as follows;
Number of moles = mass/molar mass
mass = 2.60g
Molar mass = 130.g/mol
Number of moles = 2.60g/ 130.g/mol = 0.02 moles
Molarity of solution = Number of moles/volume of solution in liters
Volume of solution = 100.mL or 0.1 L
Molarity of solution = 0.02 moles/0.1 L
Molarity of solution = 0.2 M
Learn more: https://brainly.com/question/2192784
Determine the frequency of light with a wavelength of 4.50 x 10-7 m.
25 grams of radon-222 remains after 15.28 days. How much radon was in the original sample? Write an equation for the decay of radon-222.
Answer:
half-life = 3.8 days
total time of decay = 15.2 days
initial amount = 100. g
number of half-lives past: 15.2/3.8 = 4 half-lives
4 half-lives = 1/16 remains
100. g x 1/16 = 6.25 g
Samantha AS
Which of the following compounds is ionic but yet it is expected to
contain covalent bonds as well in the form of a polyatomic ion?
NH3
KBr
CO2
NaF
Fe(NO2)3
Answer:
Fe(NO2)3
Explanation:
A poly atomic ion is an ion that contains more than one atom.
If we look at all the compounds that have been mentioned among the options; KBr and NaF are both ionic but do not contain any covalent poly atomic ion.
However, Fe(NO2)3 contains NO2^+ which is a poly atomic ion that contains the covalent bond.
You have 0.500 L of an 0.250 M acetate buffer solution (i.e. [HC₂H₃O₂] + [C₂H₃O₂⁻] = 0.250 M) at pH 3.50. How many mL of 1.000 M NaOH must you add in order to change the pH to 5.07? Acetic acid has a pKa of 4.74.
Answer:
80mL of 1.00M NaOH
Explanation:
Using H-H equation, we can determine oH of a buffer as acetate buffer. First, we need to determine amount of acetate ion and acetic acid at pH 3.50 and 5.07. Then, with the reaction of NaOH with acetic acid we can find the amount of 1.00M NaOH that must be added:
At pH 3.50:
pH = pka + log [C₂H₃O₂⁻] / [HC₂H₃O₂]
3.50 = 4.74 + log [C₂H₃O₂⁻] / [HC₂H₃O₂]
0.057544 = [C₂H₃O₂⁻] / [HC₂H₃O₂] (1)
Using and replacing in (1):
[HC₂H₃O₂] + [C₂H₃O₂⁻] = 0.250 M
[HC₂H₃O₂] + 0.057544[HC₂H₃O₂] = 0.250 M
1.057544 [HC₂H₃O₂] = 0.250M
[HC₂H₃O₂] = 0.2364M * 0.500L = 0.1182 moles of acetic acid at first pH
At pH 5.07:
pH = pka + log [C₂H₃O₂⁻] / [HC₂H₃O₂]
5.07 = 4.74 + log [C₂H₃O₂⁻] / [HC₂H₃O₂]
2.13796= [C₂H₃O₂⁻] / [HC₂H₃O₂] (1)
Using and replacing in (1):
[HC₂H₃O₂] + 2.13796[HC₂H₃O₂] = 0.250 M
3.13796 [HC₂H₃O₂] = 0.250M
[HC₂H₃O₂] = 0.07967M * 0.500L = 0.0398 moles of acetic acid at first pH
Now, NaOH reacts with HC₂H₃O₂ as follows:
NaOH + HC₂H₃O₂ → NaC₂H₃O₂ + H₂O
As moles of acetic acid decreases from 0,1198 moles - 0,0398 moles = 0,08 moles of acetic acid are consumed = 0,08 moles of NaOH
0,08 mol NaOH * (1L / 1mol) = 0,08L of 1.00M NaOH =
80mL of 1.00M NaOHPLEASE HELP I WILL GIVE 50 POINTS
Step 1: Create your poster.
On the poster board, draw a roller coaster track that starts with one large hill, followed by a valley, and then another, smaller hill.
Draw a cart in four different positions on the track, as outlined below.
First, draw the cart at the top of the first hill. Label it A.
Second, draw the cart going down the first hill, into the valley. Label it B. iii. Third, draw the cart at the bottom of the valley. Label it C.
iv. Last, draw the cart at the top of the second, smaller hill. Label it D.
c) Draw an energy pie chart above each of the cart’s four positions.
Choose your reference point for determining height.
Create a pie chart that accurately represents the ratio of the three forms of energy and label the sections of the pie Eg for gravitational potential energy, Ek for kinetic energy, and Eth for thermal energy.
Answer:
The one above me is correct! I used it. But of course I had to write a little different to the person's sentences and draw a little differently in my own way.
Explanation:
If somehow you can't open the PDF (the comment on top of my comment) here I took a screenshot of it, if you need it! Good luck everyone :D
d) hydrogen and sulfur
Formed
Answer:
At high temperatures or in the presence of catalysts, sulfur dioxide reacts with hydrogen sulfide to form elemental sulfur and water. This reaction is exploited in the Claus process, an important industrial method to dispose of hydrogen sulfide.
suppose 2.5g of compound a and 3.5g of compound b are consumed in a reaction that produces only one product compound c
Answer:
Mass of compound c = 6 g
Explanation:
Given:
Mass of compound a = 2.5 g
Mass of compound b = 3.5 g
Find:
Mass of compound c
Computation:
According to Law of conservation of mass
Mass of compound a + Mass of compound b = Mass of compound c
Mass of compound c = 2.5 + 3.5
Mass of compound c = 6 g
6.Which of the following is NOT true about the lens?
The following statement which is NOT true about the lens is:
A. It sends light to the optic nerveThe lens is a piece of glass which is used for the dispersal or refraction of light and is used to focus light onto the retina of the eye.
As a result of this, the lens is responsible for refracting of light, focusing of light and it is transparent. However, it does not send light to the optic nerve.
Therefore, the correct answer is option A
Read more here:
https://brainly.com/question/23730298
The boiling point of an aqueous solution is 101.54 ∘C. What is the freezing point
Answer:
101.54 .C.
Explanation:
WHo Plays adopt me on Rob.lox tell me what pets you have and tell me your gender
Explanation:
I have a dog in my dog is a girl
Answer:
me
Explanation:
I'm a girl and I have a RIDE skele-rex and a ride cerberus and a n f r GRIFFIN and a f r gold rat and a normal unicorn a RIDE kitsune
Element Z has 2 isotopes. A sample of element Z contains 19% Z234 and 81% Z236. What is the average atomic mass of the element Z?
Answer:
Wt Avg of the two isotopes = 235.62 amu
Explanation:
Given:
abundance
Isotope % fractional mass (amu) Wt. Avg. Contributions
Z234 19% 0.19 234 (0.19)(234) = 44.46 amu
Z236 81% 0.81 236 (0.81)(236) = 191.16 amu
Collective Wt. Avg. of all isotopes = ∑ Wt. Avg. Contributions
= 44.46 amu + 191.16 amu = 235.62 amu
What is the definition of a fossil?
A. the remains or impression of a prehistoric organism preserved in petrified form or as a mold or cast in rock
B.the body of a dead organism such as a dinosaur
C. the bones of an animal that has died and been buried in sand
D. something that is very old or ancient that has been found or studied by scientists
Answer:
A. The remains or impression of a prehistoric organism preserved in a petrified form or as a mold or cast in a rock
Explanation:
A.the remains or impression of a prehistoric organism preserved in petrified form or as a mold or cast in rock
If the mass of an object on Earth is 25 kg, what is its weight?
Answer:
250 Newtons.
Explanation:
Weight is a force and the Second Law of Newton can be used to figure out the Force ( weight) of this mass. Since F = ma, and 'a' on Earth is the acceleration due to freefall at 10 m/s^2 ( really 9.8 m/s^2- so your teacher may want your answer as 245 N), you multiply your mass ( 25g ) and your acceleration on Earth and you get 250 N.
Identify an element that is NOT in its standard state.
Choose the one alternative that best completes the statement or answers the question.
A) N2(g)
B) Xe(g)
C) Ca(s)
D) N(g)
Explanation:
Xenon is a gas in its standard state
Calcium is a solid in its standard state
Nitrogen is a gas in its standard state
I am assuming that N2 is a isotope of nitrogen, not sure which but by the process of elimination I think that is the answer
What do we call ingredients in a chemical reaction
Answer:
Reactants or Factors
Explanation:
make the product
What is the formula for Nickel (II) Bisulfate?
Answer:
[tex]NiHSO_{4}[/tex]
Explanation:
We're using nickel with a charge of 2, as indicated by the "(II)" in the name, and bisulfate refers to HSO[tex]_{4}[/tex], which has a charge of 2-, so they are in a 1:1 ratio.
If 42 grams of carbon and 52 grams of oxygen are used, how many grams of CO2 will be produced (Hint: find the
limiting reactant first). SHOW WORK
C + O2 + CO2
Answer:
71.5g
Explanation:
The reaction equation is given as:
C + O₂ → CO₂
Mass of C = 42g
Mass of O₂ = 52g
Unknown:
Mass of CO₂ produced = ?
Solution
Now to solve this problem, we have to find limiting reactant which is the one given in short supply in this reaction.
The extent of the reaction is controlled by this reactant.
Find the number of moles of the given species;
Number of moles = [tex]\frac{mass}{molar mass}[/tex]
Number of moles of C = [tex]\frac{42}{12}[/tex] = 3.5mol
Number of moles of O₂ = [tex]\frac{52}{32}[/tex] = 1.63mol
Now;
From the balanced reaction equation;
1 mole of C reacted with 1 mole of O₂
We see that C is in excess and O₂ is the limiting reactant.
1 mole of O₂ will produce 1 mole of CO₂
So; 1.63mole of O₂ will produce 1.63 mole of CO₂
Mass of CO₂ = number of moles x molar mass
Molar mass of CO₂ = 44g/mol
Mass of CO₂ = 1.63 x 44 = 71.5g
The balanced half-reaction in which chlorine gas is reduced to the aqueous chloride ion is a ________ process. one-electron two-electron four-electron three-electron six-electron
Answer:
Two-electron.
Explanation:
Hello!
In this case, since the half-reaction by which chlorine is reduced to aqueous chloride ion is:
[tex]Cl^0_2\rightarrow 2Cl^-[/tex]
We can see each chlorine undergo a decrease of electrons by 1, it means that, since there are two chlorine atoms undergoing an electron decrease, we write:
[tex]Cl^0_2+2e^-\rightarrow 2Cl^-[/tex]
Which means this is a two-electron process.
Best regards!
the specific heat capacity of titanium is 0.523j/g c what is the heat capacity of 2.3g of titanium
Answer:
1.2029 J/g.°C
Explanation:
Given data:
Specific heat capacity of titanium = 0.523 J/g.°C
Specific heat capacity of 2.3 gram of titanium = ?
Solution:
Specific heat capacity:
It is the amount of heat required to raise the temperature of one gram of substance by one degree.
Formula:
Q = m.c. ΔT
Q = amount of heat absorbed or released
m = mass of given substance
c = specific heat capacity of substance
ΔT = change in temperature
1 g of titanium have 0.523 J/g.°C specific heat capacity
2.3 × 0.523 J/g.°C
1.2029 J/g.°C