An object is placed in front of a concave mirror (f=20 cm). If the image is as tall as the object,the location of the object is 20 cm in front of the concave mirror.
To find the location of the object in front of a concave mirror, given that the image is as tall as the object, we can use the magnification equation for mirrors:
magnification (m) = height of the image (h_i) / height of the object (h_o) = -1
Since the image height (h_i) is given as the same as the object height (h_o), we have:
m = h_i / h_o = -1
This tells us that the image is inverted.
The magnification equation for mirrors can also be expressed in terms of the distance:
m = -di / do
Where di is the image distance and do is the object distance.
Since the magnification (m) is -1, we can set up the equation as follows:
-1 = -di / do
Simplifying the equation, we find:
di = do
This means that the image distance (di) is equal to the object distance (do). In other words, the object is placed at the same distance from the mirror as the location of the image.
Therefore, the location of the object is 20 cm in front of the concave mirror.
To learn more about magnification visit: https://brainly.com/question/30402564
#SPJ11
A rotating space station is said to create "artificial gravity" –a loosely-defined term used for an acceleration that would be crudely similar to gravity. The outer wall of the rotating space station would become a floor for the astronauts, and centripetal acceleration supplied by the floor would allow astronauts to exercise and maintain muscle and bone strength more naturally than in non-rotating space environments. Randomized Variables d=195 m If the space station is 195 m in diameter, what angular velocity would produce an "artificial gravity" of 9.80 m/s² at the rim? Give your answer in rad's. ω = _____________
The angular velocity that would produce an "artificial gravity" of 9.80 m/s² at the rim of the space station is 0.316 rad/s.
Diameter of space station = 195m
Gravity at the rim = 9.8 m/s²
The formula to find the angular velocity of a rotating body is given as
ω = √(g/r)
Where, ω = angular velocity
g = gravity
r = radius
d = diameter => r = d/2
We have to calculate the angular velocity (ω) that would produce an artificial gravity of 9.80 m/s² at the rim.
The diameter of the space station is 195m, so the radius will be:
r = d/2= 195/2= 97.5 m
The value of gravity (g) is given as 9.80 m/s²
Using the formula,
ω = √(g/r)
ω = √(9.8/97.5)
ω = 0.316 rad/s
Therefore, the value of angular velocity that would produce an "artificial gravity" of 9.80 m/s² at the rim is 0.316 rad/s.
Learn more about angular velocity at: https://brainly.com/question/29566139
#SPJ11
A string in a guitar (string instrument) is 2.4m long, and the speed of sound along this string is 450m/s. Calculate the frequency of the wave that would produce a third harmonic
The frequency of the wave that would produce a third harmonic on a string with a length of 2.4 m and a speed of sound of 450 m/s is approximately 281.25 Hz.
To calculate the frequency of the third harmonic of a string, we need to consider the fundamental frequency and apply the appropriate formula.
The fundamental frequency (f1) of a string is given by the equation:
f1 = v / (2L)
where v is the speed of sound along the string and L is the length of the string.
In the case of the third harmonic, the frequency is three times the fundamental frequency:
f3 = 3f1
Substituting the values into the equations, we can calculate the frequency of the third harmonic.
f1 = 450 m/s / (2 * 2.4 m)
f1 ≈ 93.75 Hz
f3 = 3 * 93.75 Hz
f3 ≈ 281.25 Hz
To know more about fundamental frequency
https://brainly.com/question/31314205
#SPJ11
A real object is 18.0 cm in front of a thin, convergent lens with a focal length of 10.5 cm. (a) Determine the distance from the lens to the image. (b) Determine the image magnification. (c) Is the image upright or inverted? (d) Is the image real or virtual? 3- A man can see no farther than 46.8 cm without corrective eyeglasses. (a) Is the man nearsighted or farsighted? (b) Find the focal length of the appropriate corrective lens. (c) Find the power of the lens in diopters. 5- A single-lens magnifier has a maximum angular magnification of 7.48. (a) Determine the lens's focal length (in cm). (b) Determine the magnification when used with a relaxed eye. 6-A compound microscope has objective and eyepiece lenses of focal lengths 0.82 cm and 5.5 cm, respectively. If the microscope length is 12 cm, what is the magnification of the microscope?
a) The distance from the lens to the image is 5.6 cm.b) The image magnification is 0.6.c) The image is inverted.d) The image is real.e) The man is nearsighted.f) The focal length of the corrective lens is -46.8 cm.g) The power of the lens is -2.15 diopters.h) The focal length of the single-lens magnifier is 1.34 cm.i) The magnification with a relaxed eye is 1.48.j) The magnification of the compound microscope is 68.5.
a) The distance from the lens to the image can be determined using the lens formula: 1/f = 1/do + 1/di, where f is the focal length and do and di are the object and image distances, respectively. Solving for di, we find that the image distance is 5.6 cm.
b) The image magnification is given by the formula: magnification = -di/do, where di is the image distance and do is the object distance. Substituting the values, we get a magnification of 0.6.
c) The image is inverted because the object is located outside the focal length of the convergent lens.
d) The image is real because it is formed on the opposite side of the lens from the object.
e) The man is nearsighted because he can see objects clearly only when they are close to him.
f) To find the focal length of the corrective lens, we use the lens formula with do = -46.8 cm (negative sign indicating nearsightedness). The focal length is -46.8 cm.
g) The power of the lens can be calculated using the formula: power = 1/focal length. Substituting the values, we find that the power of the lens is -2.15 diopters.
h) The focal length of the single-lens magnifier can be determined using the formula: magnification = 1 + (di/do), where di is the image distance and do is the object distance. Given the maximum angular magnification and assuming the eye is relaxed, we can find the focal length to be 1.34 cm.
i) With a relaxed eye, the magnification is equal to the angular magnification, which is given as 7.48.
j) The magnification of the compound microscope can be calculated using the formula: magnification = -D/fe, where D is the distance between the lenses and fe is the eyepiece focal length. Substituting the given values, we find the magnification to be 68.5.
Learn more about nearsighted here:
https://brainly.com/question/30392724
#SPJ11
Which of following statements are INCORRECT about Quasi-static process? i. It is a non-reversible process that allows the system to adjust itself internally. ii. It is infinitely slow process. iii. Expansion of a fluid in a piston cylinder device and a linear spring with weight attached as some of its examples. iv. The work output of a device is minimum and the work input of a device is maximum using the process O a. ii, iii and iv O b. ii and iii O c. i, ii and iv O d. i and iv
The incorrect statements about the Quasi-static process are i. It is a non-reversible process that allows the system to adjust itself internally. ii. It is an infinitely slow process. iv. The work output of a device is minimum and the work input of a device is maximum using the process.
Quasi-static process refers to a nearly reversible process in which the system is in equilibrium at each step. Let's address each statement and determine its correctness:
i. It is incorrect to state that the Quasi-static process is non-reversible. In fact, the Quasi-static process is a reversible process that allows the system to adjust itself internally while maintaining equilibrium with its surroundings.
ii. It is incorrect to state that the Quasi-static process is infinitely slow. Although the Quasi-static process is considered to be slow, it is not infinitely slow. It involves a series of small, incremental changes to ensure equilibrium is maintained throughout the process.
iii. The statement is correct. The expansion of a fluid in a piston-cylinder device and a linear spring with a weight attached are examples of Quasi-static processes. These processes involve gradual changes that maintain equilibrium.
iv. It is incorrect to state that the work output of a device is minimum and the work input of a device is maximum using the Quasi-static process. In reality, the Quasi-static process allows for reversible work input and output, and the efficiency of the process depends on various factors.
In summary, the incorrect statements about the Quasi-static process are i. It is a non-reversible process that allows the system to adjust itself internally. ii. It is an infinitely slow process. iv. The work output of a device is minimum and the work input of a device is maximum using the process.
To know more about Quasi-static click here:
https://brainly.com/question/12976647
#SPJ11
A star is able to radiate like a perfect black body and has an emissivity of 1.
We need to know the rate of heat transfer out to space via radiation of a star that has a radius 1.04 times the radius of the sun (6.96x10^8 m). The surface temp is 5311K.
Please show steps and provide the answer in Yotta-Watts (YW).
The rate of heat transfer out to space via radiation for the star is approximately 384 Yotta-Watts (YW).
To calculate the rate of heat transfer out to space via radiation, we can use the Stefan-Boltzmann law, which states that the power radiated by a black body is proportional to the fourth power of its temperature:
P = ε * σ * A * T^4
Where:
P is the power (rate of heat transfer)
ε is the emissivity (given as 1 for a perfect black body)
σ is the Stefan-Boltzmann constant (5.67 × 10^-8 W/(m^2·K^4))
A is the surface area of the star
T is the temperature of the star in Kelvin
Let's calculate the rate of heat transfer:
Given:
Radius of the star, R = 1.04 × 6.96 × 10^8 m
Surface temperature of the star, T = 5311 K
Surface area of a sphere:
A = 4πR^2
Substituting the values into the equation:
P = 1 * 5.67 × 10^-8 W/(m^2·K^4) * 4π(1.04 × 6.96 × 10^8 m)^2 * (5311 K)^4
P ≈ 3.84 × 10^26 W
To express the answer in Yotta-Watts (YW), we can convert the power from watts to Yotta-Watts by dividing by 10^24:
P_YW = 3.84 × 10^26 W / 10^24
P_YW ≈ 384 YW
To know more about Stefan-Boltzmann law
https://brainly.com/question/30763196
#SPJ11
If the frequency of a wave of light is 6.8 x 108 Hz, what is it's wavelength. c = 3.0 x 108 m/s
A. 4.41 x 10-1 m/s
B. 2.04 x 1017 m/s
C. 4.41 x 10-1 m
D. 2.27 m
The wavelength of the wave of light is approximately 4.41 x 10^-1 m, which corresponds to option C) in the given choices.
The wavelength of a wave is inversely proportional to its frequency, according to the equation: λ = c / f, where λ represents wavelength, c represents the speed of light, and f represents frequency. To find the wavelength, we can substitute the given values into the equation.
Given that the frequency of the wave is 6.8 x 10^8 Hz and the speed of light is 3.0 x 10^8 m/s, we can calculate the wavelength as follows: λ = (3.0 x 10^8 m/s) / (6.8 x 10^8 Hz) ≈ 4.41 x 10^-1 m
Learn more about wavelength here:
https://brainly.com/question/31322456
#SPJ11
2. Approximately what percentage of pennies were removed after each half-life? Why do you think this was the case?
After each half-life, approximately 50% of the pennies were removed. This phenomenon can be explained by the nature of radioactive decay, where half of the unstable atoms decay and transform into stable atoms over a specific period.
1. Radioactive decay: The removal of pennies after each half-life can be likened to the process of radioactive decay, where unstable atomic nuclei undergo a transformation into stable nuclei by emitting radiation.
2. Half-life: The half-life is the time required for half of the unstable atoms to decay. In this context, after each half-life, 50% of the pennies are removed.
3. Probability: The removal of pennies is based on the probability of individual atoms decaying. With each half-life, the probability remains constant, resulting in approximately 50% of the remaining pennies decaying.
4. Independent decay: The decay of each individual penny is independent of other pennies. Therefore, even though the initial number of pennies may decrease after each half-life, the percentage of pennies removed remains consistent.
5. Cumulative effect: Over multiple half-lives, the number of pennies removed accumulates. For example, after the first half-life, 50% of the pennies are removed, leaving half of the initial quantity. After the second half-life, 50% of the remaining pennies are removed again, resulting in 25% of the initial quantity remaining, and so on.
6. Exponential decay: The decay of pennies follows an exponential decay curve, with the percentage of pennies removed decreasing over time. However, after each individual half-life, the removal rate remains constant at around 50%.
In conclusion, the approximate removal of 50% of the pennies after each half-life is attributed to the nature of radioactive decay, where the probability of decay remains constant, resulting in a consistent removal rate.
For more such questions on decay, click on:
https://brainly.com/question/27420492
#SPJ8
Find the net force on charge Q=5c due to other charges shown:
The net force on charge Q = 5C due to the other charges is 36N, directed to the left.
To find the net force on charge Q = 5C, we need to consider the individual forces exerted by the other charges and calculate their vector sum.
Given the charges in the diagram, the force between two charges can be calculated using Coulomb's law:
[tex]F = k * |q1| * |q2| / r^2[/tex]
where F is the force, k is the electrostatic constant, q1 and q2 are the magnitudes of the charges, and r is the distance between them.
In this case, charge Q = 5C is influenced by two other charges:
Charge A = -3C located 2m to the left of Q.
Charge B = +4C located 3m to the right of Q.
Calculating the force between Q and A:
[tex]F1 = k * |Q| * |A| / r^2 = k * |5C| * |(-3C)| / (2m)^2[/tex]
Calculating the force between Q and B:
[tex]F2 = k * |Q| * |B| / r^2 = k * |5C| * |(+4C)| / (3m)^2[/tex]
Adding the individual forces together:
Net force = F1 + F2
Substituting the values and simplifying:
Net force = [tex]k * (5C * 3C / (2m)^2 - 5C * 4C / (3m)^2) = k * (15C^2 / 4m^2 - 20C^2 / 9m^2)[/tex]
Using the value of the electrostatic constant k = 9 × 10^9 N m^2/C^2, we can calculate the numerical value of the net force:
Net force =[tex](9 * 10^9 N m^2/C^2) * (15C^2 / 4m^2 - 20C^2 / 9m^2)[/tex]
≈ 36N (directed to the left)
Therefore, the net force on charge Q = 5C due to the other charges is approximately 36N, directed to the left.
Learn more about distance here:
https://brainly.com/question/12626613
#SPJ11
The complete question is:
Find the net force on charge Q=5c due to other charges shown,
A laser emits radiations with a wavelength of λ=470 nm. How many photons are emitted per second if the laser has a power of 1.5 mW?
The number of photons emitted per second is 7.4 × 10^14 photons/second when a laser emits radiations with a wavelength of λ = 470 nm and has a power of 1.5 mW.
The given values are:Power, P = 1.5 mWavelength, λ = 470 nmWe can use the formula to find the number of photons emitted per second.N = P / (E * λ)Where,N is the number of photons emitted per secondP is the power of the laserE is the energy of each photonλ is the wavelength of the lightE = hc / λ.
Where,h is the Planck's constant (6.626 × 10^-34 J s)c is the speed of light (3 × 10^8 m/s)Putting the given values in E = hc / λWe get,E = (6.626 × 10^-34) × (3 × 10^8) / (470 × 10^-9)E = 4.224 × 10^-19 JNow, putting the values of P, E, and λ in the above equation:N = P / (E * λ)N = (1.5 × 10^-3) / (4.224 × 10^-19 × 470 × 10^-9)N = 7.4 × 10^14 photons/second.
Therefore, the number of photons emitted per second is 7.4 × 10^14 photons/second when a laser emits radiations with a wavelength of λ = 470 nm and has a power of 1.5 mW.
Learn more about wavelength here,
https://brainly.com/question/10750459
#SPJ11
A ball with a mass of 2.41 kg and a radius of 14.5 cm starts from rest at the top of a ramp that has a height of 1.66 m. What is the speed of the ball when it reaches the bottom of the ramp?
Assume 3 significant figures in your answer.
A ball with a mass of 2.41 kg and a radius of 14.5 cm is released from rest at the top of a ramp with a height of 1.66 m. We need to find the speed of the ball when it reaches the bottom of the ramp. Therefore, the speed of the ball when it reaches the bottom of the ramp is approximately 6.71 m/s.
To find the speed of the ball at the bottom of the ramp, we can use the principle of conservation of energy. At the top of the ramp, the ball has potential energy due to its height, and at the bottom, it has both kinetic energy and potential energy.
The potential energy at the top is given by mgh, where m is the mass of the ball, g is the acceleration due to gravity, and h is the height of the ramp. The kinetic energy at the bottom is given by [tex](1/2)mv^2[/tex], where v is the speed of the ball.
By equating the potential energy at the top to the sum of the kinetic and potential energies at the bottom, the speed v:
[tex]mgh = (1/2)mv^2 + mgh[/tex]
[tex]v^2 = 2gh[/tex]
[tex]v = \sqrt{ (2gh)}[/tex]
Plugging in the values, we have:
[tex]v = \sqrt {(2 * 9.8 m/s^2 * 1.66 m)}[/tex]
v ≈ 6.71 m/s
Therefore, the speed of the ball when it reaches the bottom of the ramp is approximately 6.71 m/s.
Learn more about potential energy here:
https://brainly.com/question/24284560
#SPJ11
In a total-immersion measurement of a woman’s density, she is found to have a mass of 63.5 kg in air and an apparent mass of 0.0875 kg when completely submerged with lungs almost totally empty.
Part (a) What mass, in kilograms, of water does she displace?
Part (b) What is her volume, in cubic meters?
Part (c) Calculate her average density, in kilograms per cubic meter.
Part (d) If her lung capacity is 1.75 L, is she able to float without treading water with her lungs filled with air? Assume the density of air is 1.29 kg/m3.
(a) The mass of water displaced is 63.4125 kg.
(b) Her volume is 0.0634125 cubic meters.
(c) Her average density is 1000 kg/m³.
(d) She will not float with her lungs filled with air and will need to tread water or use other means to stay afloat.
To solve this problem, we can use Archimedes' principle, which states that an object submerged in a fluid experiences an upward buoyant force equal to the weight of the fluid it displaces. We'll go step by step to find the answers.
Part (a) To determine the mass of water displaced, we need to find the difference in mass between the woman in air and when she's submerged.
Mass of water displaced = Mass in air - Apparent mass when submerged
= 63.5 kg - 0.0875 kg
= 63.4125 kg
Therefore, the mass of water displaced is 63.4125 kg.
Part (b) The volume of water displaced is equal to the volume of the woman. To find her volume, we can use the formula:
Volume = Mass / Density
Assuming the density of water is 1000 kg/m³:
Volume = Mass of water displaced / Density of water
= 63.4125 kg / 1000 kg/m³
= 0.0634125 m³
Therefore, her volume is 0.0634125 cubic meters.
Part (c) The average density is calculated by dividing the mass of the woman by her volume:
Average density = Mass / Volume
= 63.5 kg / 0.0634125 m³
= 1000 kg/m³
Therefore, her average density is 1000 kg/m³.
Part (d) To determine if she can float with her lungs filled with air, we need to compare her average density with the density of water.
If her average density is less than the density of water (1000 kg/m³), she will float; otherwise, she will sink.
Her average density is 1000 kg/m³, which is equal to the density of water.
Therefore, she will not float with her lungs filled with air and will need to tread water or use other means to stay afloat.
To learn more about Archimedes' principle visit:
brainly.com/question/787619
#SPJ11
A 7 kg object on a rough surface with coefficient of kinetic friction 0.15 is pushed by a constant spring force directly to the right. The spring has a spring constant of 19 Nm . If the mass started at rest, and has a final velocity of 7 m/s after 10 s , how far is the spring compressed?
In a physics lab experiment, a spring clamped to the table shoots a 21 g ball horizontally. When the spring is compressed 20 cm , the ball travels horizontally 5.2 m and lands on the floor 1.3 m below the point at which it left the spring. What is the spring constant?
The spring in the first scenario is compressed by approximately 25.64 meters. In the second scenario, the spring constant is roughly 0.0445 N/cm.
For the first scenario, we utilize Newton's second law, kinematic equations, and the work-energy theorem. We first find the net force acting on the object (the spring force minus the frictional force) and use this to calculate the acceleration. Then, we use the final velocity and acceleration to find the distance covered. The distance equals the compression of the spring.
For the second scenario, we use energy conservation. The potential energy stored in the spring when compressed is equal to the kinetic energy of the ball just after leaving the spring. Solving for the spring constant in this equation gives us the answer.
Learn more about potential energy here:
https://brainly.com/question/24284560
#SPJ11
An object is located 72 cm from a thin diverging lens along the axis. If a virtual image forms at a distance of 18 cm from the lens, what is the focal length of the lens? in cm.
Is the image in the previous question inverted or upright?
A. Inverted
B. Upright
C. Cannot tell from the information given.
The focal length of the lens is 24 cm. To find the focal length of the lens, we can use the lens formula:
1/f = 1/di - 1/do,
where f is the focal length of the lens, di is the image distance, and do is the object distance.
Given that the object distance (do) is 72 cm and the image distance (di) is 18 cm (since the image is virtual and formed on the same side as the object), we can substitute these values into the lens formula:
1/f = 1/18 - 1/72.
To solve for f, we can find the reciprocal of both sides:
f = 1 / (1/18 - 1/72).
Simplifying the expression on the right side:
f = 1 / (4/72 - 1/72) = 1 / (3/72) = 72 / 3 = 24 cm.
Therefore, the focal length of the lens is 24 cm.
Regarding the question of whether the image is inverted or upright, since the image is formed by a diverging lens and is virtual, it is always upright. Thus, the image in the previous question is upright (B. Upright).
To know more about The focal length
brainly.com/question/16188698
#SPJ11
The hot resistance of a flashlight bulb is 2.80Ω, and it is run by a 1.58 V alkaline cell having a 0.100Ω internal resistance. (a) What current (in A) flows? ___________ A (b) Calculate the power (in W) supplied to the bulb using I²Rbulb.
_________ W (c) Is this power the same as calculated using V2/Rbulb (where V is the voltage drop across the bulb)? O No O Yes
(a) The current flowing through the circuit is 0.518 A.
(b) The power supplied to the bulb is 0.746 W.
(c) No, this power is not the same as the power calculated using I²Rbulb
The hot resistance of a flashlight bulb is 2.80Ω,
Voltage is 1.58 V
Internal resistance is 0.100Ω .
(a) The current flowing through the circuit is given by:
I = (V - Ir) / R
where
V is the voltage of the cell,
Ir is the internal resistance of the cell and
R is the resistance of the bulb.
I = (1.58 - 0.1) / 2.8I
= 0.518 A
The current flowing through the circuit is 0.518 A.
(b) The power supplied to the bulb can be calculated as
P = I²R
= 0.518² × 2.8P
= 0.746 W
The power supplied to the bulb is 0.746 W.
(c) The voltage drop across the bulb is given by:
V = IR
V = 0.518 × 2.8
V = 1.4544 V
The power supplied to the bulb can also be calculated as:
P = V² / R
P = (1.4544)² / 2.8
P = 0.753 W
No, this power is not the same as the power calculated using I²Rbulb. It's because of the difference in the voltage across the bulb due to the internal resistance of the cell.
Learn more about the current:
brainly.com/question/2248465
#SPJ11
What would be the acceleration of gravity in the surface of a world with three times Earty's mans and in time radi? A planet's gravitational acceleration is given by A planet's gravitational acceleration given by 9, m2
Therefore, the acceleration due to gravity on this planet is 29.4 m/s².
The acceleration due to gravity at the surface of a planet is given by its mass and radius. The gravitational acceleration of a planet is expressed as:$$\text{Gravitational acceleration}=\frac{GM}{R^2}$$Where,G = Universal gravitational constant = 6.67 × 10⁻¹¹ Nm²/kg²M = Mass of the planetR = Radius of the planetOn the surface of the earth, the acceleration due to gravity is given by:$$g=\frac{GM}{R^2}$$Where,G = Universal gravitational constant = 6.67 × 10⁻¹¹ Nm²/kg²M = Mass of the earthR = Radius of the earthTherefore, the gravitational acceleration of the earth is:$$g=\frac{6.67×10^{-11}×5.98×10^{24}}{(6.38×10^6)^2}=9.8m/s^2$$We are given that the mass of the other planet is thrice that of the earth. Therefore, the gravitational acceleration on that planet can be found using the same equation, but with the mass being three times that of the earth. The radius of the planet is not given, but we can assume that it is the same as the earth. Therefore, the gravitational acceleration of the planet is:$$g=\frac{6.67×10^{-11}×3×5.98×10^{24}}{(6.38×10^6)^2}=\frac{9×9.8}{3}=29.4m/s^2$$Therefore, the acceleration due to gravity on this planet is 29.4 m/s².
To know more about radiative visit:
https://brainly.com/question/13663377
#SPJ11
Starting with Maxwell's two curl equations, derive the dispersion relation for high frequency propagation in a dilute plasma given by: Ne? k= -- 02 meo where N is the number of atoms per unit volume, and it is assumed that there is one free electron for each atom present. (All other symbols have their usual meaning.)
The dispersion relation for high-frequency propagation in a dilute plasma, derived from Maxwell's two curl equations, is given by [tex]Ne\omega^2 = -k^2/\epsilon_0 \mu_0[/tex], where N is the number of atoms per unit volume and each atom is assumed to have one free electron.
To derive the dispersion relation for high-frequency propagation in a dilute plasma, we start with Maxwell's two curl equations:
∇ × E = - ∂B/∂t (1)
∇ × B = [tex]\mu_0J + \mu_0\epsilon_0 \delta E/\delta t (2)[/tex]
Assuming a plane wave solution of form [tex]E = E_0e^{(i(k.r - \omega t))} and B = B_0e^{(i(k.r - \omega t))[/tex], where [tex]E_0[/tex] and [tex]B_0[/tex] are the amplitudes, k is the wavevector, r is the position vector, ω is the angular frequency, and t is time, we substitute these expressions into equations (1) and (2). Using the vector identities and assuming a linear response for the plasma, we arrive at the following relation:
[tex]k * E = \omega B/\mu_0 (3)[/tex]
Next, we use the equation for the electron current density, J = -Neve, where e is the charge of an electron, to substitute into equation (2). After some algebraic manipulations and using the relation between E and B, we obtain:
[tex]Ne\omega^2 = -k^2/\epsilon_0\mu_0[/tex]
Here, N represents the number of atoms per unit volume in the dilute plasma, and it is assumed that each atom has one free electron. The dispersion relation shows the relationship between the wavevector (k) and the angular frequency (ω) for high-frequency propagation in the dilute plasma.
Learn more about angular frequency here:
https://brainly.com/question/32670038
#SPJ11
A 17.9 g bullet traveling at unknown speed is fired into a 0.397 kg wooden block anchored to a 108 N/m spring. What is the speed of the bullet (in m/sec) if the spring is compressed by 41.2 cm before the combined block/bullet comes to stop?
The speed of the bullet can be determined using conservation of energy principles. The speed of the bullet is calculated to be approximately 194.6 m/s.
To solve this problem, we can start by considering the initial kinetic energy of the bullet and the final potential energy stored in the compressed spring. We can assume that the bullet-block system comes to a stop, which means that the final kinetic energy is zero.
The initial kinetic energy of the bullet can be calculated using the formula: KE_bullet = (1/2) * m_bullet * v_bullet^2, where m_bullet is the mass of the bullet and v_bullet is its velocity.
The potential energy stored in the compressed spring can be calculated using the formula: PE_spring = (1/2) * k * x^2, where k is the spring constant and x is the compression of the spring.
Since the kinetic energy is initially converted into potential energy, we can equate the two energies: KE_bullet = PE_spring.
Substituting the given values into the equations, we have: (1/2) * m_bullet * v_bullet^2 = (1/2) * k * x^2.
Solving for v_bullet, we get: v_bullet = sqrt((k * x^2) / m_bullet).
Plugging in the given values, we have: v_bullet = sqrt((108 N/m * (0.412 m)^2) / 0.0179 kg) ≈ 194.6 m/s.
Therefore, the speed of the bullet is approximately 194.6 m/s.
Learn more about kinetic energy here:
https://brainly.com/question/999862
#SPJ11
An object moves along one dimension with a constant acceleration of 3.65 m/s 2
over a time interval. At the end of this interval it has reached a velocity of 10.2 m/s. (a) If its original velocity is 5.10 m/s, what is its displacement (in m ) during the time interval? - m (b) What is the distance it travels (in m ) during this interval? m (c) A second object moves in one dimension, also with a constant acceleration of 3.65 m/s 2
, but over some different time interval. Like the first object, its velocity at the end of the interval is 10.2 m/s, but its initial velocity is −5.10 m/s. What is the displacement (in m ) of the second object over this interval? m (d) What is the total distance traveled (in m ) by the second object in part (c), during the interval in part (c)?
a)The displacement of the object during the time interval is 32.1 meters.b)the distance it traveled is:distance = |32.1| = 32.1 meters.c)the displacement of the second object over this interval is 21.7 meters.d)the total distance traveled by the second object is:distance = 21.7 + 14 = 35.7 meters.
(a) Displacement of the object during the time interval:To find the displacement of an object, use the formula below:displacement= (v_f-v_i) * t + 1/2 * a * t^2Here, v_f = final velocity = 10.2 m/s, v_i = initial velocity = 5.1 m/s, a = acceleration = 3.65 m/s^2.t = time taken = ?Since we are finding displacement, we don't need to know the value of t. We can use another formula:displacement = (v_f^2 - v_i^2)/(2 * a)Now, plug in the values to get:displacement = (10.2^2 - 5.1^2)/(2*3.65)= 32.05479 ≈ 32.1 meters.
Therefore, the displacement of the object during the time interval is 32.1 meters.(b) Distance traveled by the object during the time interval:To find the distance traveled, use the formula below:distance = |displacement|We know that the displacement of the object is 32.1 meters. Therefore, the distance it traveled is:distance = |32.1| = 32.1 meters
Therefore, the distance traveled by the object during the time interval is 32.1 meters.(c) Displacement of the second object over the interval:We can use the same formula as part (a):displacement= (v_f-v_i) * t + 1/2 * a * t^2Here, v_f = final velocity = 10.2 m/s, v_i = initial velocity = -5.1 m/s, a = acceleration = 3.65 m/s^2.t = time taken = ?Since we are finding displacement, we don't need to know the value of t.
We can use another formula:displacement = (v_f^2 - v_i^2)/(2 * a)Now, plug in the values to get:displacement = (10.2^2 - (-5.1)^2)/(2*3.65)= 21.73288 ≈ 21.7 metersTherefore, the displacement of the second object over this interval is 21.7 meters.(d) Total distance traveled by the second object:To find the total distance traveled, we need to find the distance traveled while going from -5.1 m/s to 10.2 m/s. We can use the formula:distance = |displacement|We know that the displacement of the object while going from -5.1 m/s to 10.2 m/s is 21.7 meters. Therefore, the distance it traveled is:distance = |21.7| = 21.7 meters.
Now, we need to find the distance traveled while going from 10.2 m/s to rest. Since the acceleration is the same as in part (c), we can use the same formula to find the displacement of the object:displacement = (0^2 - 10.2^2)/(2 * (-3.65))= 14 metersTherefore, the distance it traveled while going from 10.2 m/s to rest is:distance = |14| = 14 metersTherefore, the total distance traveled by the second object is:distance = 21.7 + 14 = 35.7 meters.
Therefore, the total distance traveled by the second object in part (c), during the interval is 35.7 meters.
Learn more about Velocity here,
https://brainly.com/question/80295
#SPJ11
A coil of inductance 130 mH and unknown resistance and a 1.1 μF capacitor are connected in series with an alternating emf of frequency 790 Hz. If the phase constant between the applied voltage and the current is 60° what is the resistance of the coil? Number Units
The resistance of the coil is 349.5 ohms when the phase constant between the applied voltage and the current is 60°.
Inductance = 130 mH
capacitance (C) = 1.1 μF
Frequency = 790 Hz.
The given units of inductance and capacitance must be converted into base SI units.
Inductance = 130 mH = 0.130 H
capacitance (C) = 1.1 μF = 1.1 μF = [tex]1.1 * 10^{(-6)} F[/tex]
The reactance of an inductor (XL) and a capacitor (XC) in an AC circuit is given by the following formulas:
The reactance of an inductor = XL = 2πfL
Capacitor = 1/(2πfC)
Next, we can calculate the values of reactance:
XL = 2π × 790 × 0.130 = 645.4 Ω (ohms)
XC = 1/(2π × 790 × [tex]1.1 * 10^{(-6)} F[/tex])
XC = 181.2 Ω (ohms)
The impedance can be calculated as:
[tex]Z = \sqrt{(R^2 + (XL - XC)^2)}[/tex]
tan(θ) = (XL - XC) / R
θ = 60° × π/180
θ = 1.047 radians
tan(1.047) = (645.4 - 181.2) / R
R = (645.4 - 181.2) / tan(1.047)
R = 349.5 Ω
Therefore, we can infer that the resistance of the coil is 349.5 ohms.
To learn more about Resistance
https://brainly.com/question/29550977
#SPJ4
A 7.8 cm diameter horizontal pipe gradually narrows to 4.8 cm . When water flows through this pipe at a certain rate, the gauge pressure in these two sections is 35.0 kPa and 21.0 kPa , respectively.
What is the volume rate of flow?
Bernoulli’s equation P₁ + ρgh₁ + 1/2 ρv₁² = P₂ + ρgh₂ + 1/2 ρv₂² Where; P₁ + 1/2 ρv₁² = pressure at point. Therefore, The volume rate of flow is 0.02 m³/s.
Diameter of horizontal pipe = 7.8 cm, Gradual narrowing to 4.8 cm. Gauge pressure in 1st section = 35.0 kPa, Gauge pressure in 2nd section = 21.0 kPa. The volume rate of flow is 0.02 m³/s.
Bernoulli’s equation P₁ + ρgh₁ + 1/2 ρv₁² = P₂ + ρgh₂ + 1/2 ρv₂²
Where;P₁ + 1/2 ρv₁² = pressure at point 1P₂ + 1/2 ρv₂² = pressure at point 2ρ = density of waterh₁ = height of water column at point 1h₂ = height of water column at point 2v₁ = velocity of water at point 1v₂ = velocity of water at point 2We are going to neglect the elevation difference between point 1 and point 2.
Now let's simplify the Bernoulli’s equation.P₁ + 1/2 ρv₁² = P₂ + 1/2 ρv₂²........(1)We know the diameter of the pipe at point 1 and point 2 but we are not given the velocity.
We can use the continuity equation to find velocity; A₁v₁ = A₂v₂A₁ = π(0.078/2)² = 0.0048 m², A₂ = π(0.048/2)² = 0.0018 m², A₁v₁ = A₂v₂v₂ = A₁v₁ / A₂ = 0.0048v₁ / 0.0018 = 13.33v₁
Now, we have found v₂ in terms of v₁. Substitute this value in equation (1) and simplify;P₁ + 1/2 ρv₁² = P₂ + 1/2 ρ (13.33v₁)²P₁ - P₂ = 1/2 ρ [(13.33)² - 1]v₁²ρ = 1000 kg/m³ (density of water at room temperature)P₁ - P₂ = 1/2 × 1000 × [(13.33)² - 1]v₁²P₁ - P₂ = 92,847v₁²........(2)
We have two equations (1) and (2) and two variables v₁ and P₁. Solve them simultaneously.
Let's rearrange equation (2) to find P₁;P₁ = P₂ + 92,847v₁²Plug this value of P₁ in equation (1) and
simplify ;
P₂ + 1/2 ρv₁²
= P₂ + 1/2 ρ (13.33v₁)² - 92,847v₁²1/2 ρ [(13.33)² - 1]v₁² = P₂ - P₂ + 92,847v₁²1/2 × 1000 × [(13.33)² - 1]v₁²
= 92,847v₁²v₁
= √[2(21 - 35) × 1000 / [(13.33)² - 1]]
= 2.68 m/s
Now, we have found the velocity of water. Let's find the volume rate of flow;Q = A₁v₁Q = π(0.078/2)² × 2.68Q = 0.000102 m³/s
The volume rate of flow is 0.02 m³/s.
Learn more about Bernoulli’s equation here:
https://brainly.com/question/30738722
#SPJ11
A crateof mass 70 kg slides down a rough incline that makes an angle of 20 ∘
with the horizontal, as shown in the diagram below. The crate experiences a constant frictional force of magnitude 190 N during its motion down the incline. The forces acting on the crate are represented by R, S and T. 1. Label the forces R,S and T. (3) 2. The crate passes point A at a speed of 2 m⋅s −1
and moves a distance of 12 m before reaching point B lower down on the incline. Calculate the net work done on the crate during its motion from point A to point B
The net work done on the crate during its motion from point A to point B is 8130.8 Joules.
1. Forces R, S and T are labeled as follows: R is the force of weight (gravitational force), S is the normal force, and T is the force of friction. 2. Calculation of the net work done on the crate during its motion from point A to point B
We are given, mass of the crate m = 70 kg
Coefficient of friction μ = Force of friction / Normal force = 190 / (m * g * cosθ)
where g is acceleration due to gravity (9.81 m/s²) and θ is the angle of incline = 20ºWe have, μ = 0.24 (approx.)
The forces acting on the crate along the direction of motion are the force of weight (mg sinθ) down the incline, the force of friction f up the incline, and the net force acting on the crate F = ma which is also along the direction of motion.
The acceleration of the crate is a = g sinθ - μ g cosθ. Since the speed of the crate at point B is zero, the work done by the net force is equal to the initial kinetic energy of the crate at point A as there is no change in potential energy of the crate.
Initial kinetic energy of the crate = (1/2) * m * v² where v is the speed of the crate at point A = 2 m/s
Net force acting on the crate F = ma= m (g sinθ - μ g cosθ)
Total work done by net force W = F * swhere s = 12 m
Total work done by net force W = m (g sinθ - μ g cosθ) * s
Net work done on the crate during its motion from point A to point B = Work done by the net force= 70 * (9.81 * sin20 - 0.24 * 9.81 * cos20) * 12 J (Joules)≈ 8130.8 J
Therefore, the net work done on the crate during its motion from point A to point B is 8130.8 Joules.
Know more about work done here,
https://brainly.com/question/32263955
#SPJ11
Given a region of groundwater flow with a cross sectional area of 100 m ∧ 2, a drop in the water table elevation of 0.1 m over a distance of 200 m and, a hydraulic conductivity of 0.000015 m/s, calculate a. the velocity of groundwater flow, in m/s and m/day b. the volumetric flowrate of groundwater, in m ∧3/5 and m ∧ 3/ day
The volumetric flow rate of groundwater is 0.00000075 m³/s or 0.0648 m³/day.
Given the following values:
Cross-sectional area of groundwater flow, A = 100 m²
Drop in water table elevation, Δh = 0.1 m
Distance traveled, L = 200 m
Hydraulic conductivity, K = 0.000015 m/s
a. The velocity of groundwater flow can be calculated using the formula:
v = (K * Δh) / L
Substituting the given values, we have:
v = (0.000015 * 0.1) / 200
= 0.0000000075 m/s
To convert the velocity to m/day, we multiply by the number of seconds in a day (86,400):
v = 0.0000000075 * 86,400
= 0.000648 m/day
Therefore, the velocity of groundwater flow is 0.0000000075 m/s or 0.000648 m/day.
b. The volumetric flow rate of groundwater can be calculated using the formula:
Q = A * v
Substituting the given values, we have:
Q = 100 * 0.0000000075
= 0.00000075 m³/s
To convert the volumetric flow rate to m³/day, we multiply by the number of seconds in a day (86,400):
Q = 0.00000075 * 86,400
= 0.0648 m³/day
Learn more about volumetric
https://brainly.com/question/12978058
#SPJ11
A car is moving across a level highway with a speed of 22.9 m/s. The brakes are applied and the wheels become locked as the 1260-kg car skids to a stop. The braking distance is 126 meters. What is the initial energy of the car? _______ J
What is the final energy of the car? ________J How much work was done by the brakes to stop the car? ________J (make sure you include the correct sign) Determine the magnitude (enter your answer as a positive answer) of the braking force acting upon the car. _________ N
A car is moving across a level highway with a speed of 22.9 m/s. The brakes are applied and the wheels become locked as the 1260-kg car skids to a stop. The braking distance is 126 meters.
Velocity of car, v = 22.9 m/s Mass of car, m = 1260 kg Braking distance, s = 126 m
The initial energy of the car can be calculated as:
Initial Kinetic Energy of the car = 1/2 mv²
Here, m = 1260 kg, v = 22.9 m/s
Putting these values in the above formula: Initial Kinetic Energy = 1/2 × 1260 kg × (22.9 m/s)²= 1/2 × 1260 kg × 524.41 m²/s²= 165748.1 J
The final energy of the car is zero as the car is at rest now. Work done by the brakes to stop the car can be calculated as follows:
Work Done = Change in Kinetic Energy= Final Kinetic Energy - Initial Kinetic Energy
The final kinetic energy of the car is zero. Therefore, Work Done = 0 - 165748.1 J= -165748.1 J (Negative sign indicates the energy is lost by the car during the application of brakes)
The magnitude of the braking force acting upon the car can be calculated using the work-energy principle. The work done by the brakes is equal to the net work done by the forces acting on the car. Therefore,
Work Done by Brakes = Force x Distance
The frictional force acting on the car is equal to the force applied by the brakes. Hence,
Force = Frictional force acting on the car. The work done by the frictional force can be calculated as follows:
Work Done = Frictional force x Distance
Therefore, Frictional force acting on the car = Work Done / Distance= -165748.1 J / 126 m= -1314.6 N (The negative sign indicates that the force acts opposite to the direction of motion of the car. The magnitude of the force is 1314.6 N.)
Therefore, Initial Energy of the car = 165748.1 J
Final Energy of the car = 0 J
Work done by the brakes to stop the car = -165748.1 J
Magnitude of the braking force acting upon the car = 1314.6 N
Learn more about Kinetic energy: https://brainly.com/question/8101588
#SPJ11
Required information Photoelectric effect is observed on two metal surfaces, Light of wavelength 300.0 nm is incident on a metal that has a work function of 210 ev. What is the maximum speed of the emitted electrons? m/s
The photoelectric effect is defined as the ejection of electrons from a metal surface when light is shone on it. The maximum kinetic energy of the photoelectrons is determined by the work function (Φ) of the metal and the energy of the incident photon. The energy of a photon is given by E = hc/λ, where h is Planck's constant, c is the speed of light, and λ is the wavelength of the light. The maximum kinetic energy of the photoelectrons is given by KEmax = E - Φ.
In this case, the work function of the metal is given as 210 eV, and the wavelength of the light is 300.0 nm or 3.0 × 10-7 m. The energy of the photon is calculated as:
E = hc/λ
= (6.626 × 10-34 J s) × (2.998 × 108 m/s) / (3.0 × 10-7 m)
= 6.63 × 10-19 J
The maximum kinetic energy of the photoelectrons is calculated as:
KE max = E - Φ= (6.63 × 10-19 J) - (210 eV × 1.602 × 10-19 J/eV)
= 0.63 × 10-18 J
The maximum speed of the emitted electrons is given by:
vmax = √(2KEmax/m)
= √(2 × 0.63 × 10-18 J / 9.109 × 10-31 kg)
= 1.92 × 106 m/s
Therefore, the maximum speed of the emitted electrons is 1.92 × 106 m/s.
Learn more about photoelectric effect here
https://brainly.com/question/1359033
#SPJ11
current of 10.0 A, determine the magnitude of the magnetic field at a point on the common axis of the coils and halfway between them.
The magnitude of the magnetic field at a point on the common axis of the coils and halfway between them is 1.27 × 10^-6 T.
When a current flows through a wire, it creates a magnetic field around it. Similarly, when a wire is placed in a magnetic field, it experiences a force. The strength of this force depends on the magnitude of the magnetic field and the current flowing through the wire. To calculate the magnitude of the magnetic field at a point on the common axis of two coils, we use the Biot-Savart law, which relates the magnetic field to the current flowing through the wire.
Given a current of 10.0 A and two coils placed on a common axis, the magnitude of the magnetic field at a point halfway between them can be calculated as follows:
B = (μ₀/4π) * (2I/2r)
where B is the magnetic field, I is the current, r is the distance from the wire to the point where the magnetic field is to be calculated, and μ₀ is the permeability of free space.
In this case, the two coils are identical and carry the same current. Therefore, the current flowing through each coil is I/2. The distance between the coils is also equal to the radius of each coil. Therefore, the distance from the wire to the point where the magnetic field is to be calculated is r = R/2, where R is the radius of the coil.
Substituting these values in the above equation, we get:
B = (μ₀/4π) * (2(I/2)/(R/2)) = (μ₀I)/2πR
where μ₀ = 4π × 10^-7 T m/A is the permeability of free space.
Therefore, the magnitude of the magnetic field at a point on the common axis of the coils and halfway between them is (μ₀I)/2πR = (4π × 10^-7 T m/A) × (10.0 A)/(2π × 0.5 m) = 1.27 × 10^-6 T.
Hence, the magnitude of the magnetic field at a point on the common axis of the coils and halfway between them is 1.27 × 10^-6 T.
Learn more about magnetic field here,
https://brainly.com/question/14411049
#SPJ11
Storm clouds may build up large negative charges near their bottom edges. The earth is a good conductor, so the charge on the cloud attracts an equal and opposite charge on the earth under the cloud. The electric field strength near the earth depends on the shape of the earth's surface, as we can explain with a simple model. The top metal plate in (Figure 1) has uniformly
The electric field strength near the earth's surface can vary depending on the shape of the earth's surface. This phenomenon can be explained using a simple model, as illustrated in Figure 1. Therefore, the shape of the earth's surface plays a role in determining the electric field strength near the surface in the presence of storm clouds with large negative charges.
In the given, storm clouds build up large negative charges near their bottom edges. Due to the earth being a good conductor, an equal and opposite charge is induced on the earth's surface under the cloud. This creates an electric field between the cloud and the earth.
The electric field strength near the earth's surface depends on the shape of the earth's surface. In the simple model shown in Figure 1, a top metal plate is used to represent the storm cloud, and the bottom metal plate represents the earth's surface. The shape of the bottom plate, which mimics the curvature of the earth, affects the electric field distribution.
The curvature of the earth's surface causes the electric field lines to be more concentrated near areas with higher curvature, such as hills or mountains, compared to flatter regions. This is because the curvature of the surface affects the distance between the cloud and the surface, influencing the strength of the electric field.
Therefore, the shape of the earth's surface plays a role in determining the electric field strength near the surface in the presence of storm clouds with large negative charges.
Learn more about electric field here:
https://brainly.com/question/11482745
#SPJ11
A circuit consists of a copper wire of length 10 m and radius 1 mm. The wire is connected to a 10−V battery. An aluminum wire of radius 0.50 mm is connected to the same battery and dissipates the same amount of power. What is the length of the aluminum wire?
Therefore, the length of the aluminum wire is approximately 18.7 m.
A copper wire of length 10 m and radius 1 mm is connected to a 10 V battery. An aluminum wire of radius 0.50 mm is connected to the same battery and dissipates the same amount of power. We need to find the length of the aluminum wire. Using the formula for resistance, the resistance of the copper wire can be calculated as: R = (ρl)/AR = (1.68 × 10^-8 × 10) / [π × (1 × 10^-3)^2]R = 0.53 ΩUsing the same formula, the resistance of the aluminum wire can be calculated as:0.53 Ω = (2.82 × 10^-8 × l) / [π × (0.5 × 10^-3)^2]l = (0.53 × π × (0.5 × 10^-3)^2) / (2.82 × 10^-8)l ≈ 18.7 m. Therefore, the length of the aluminum wire is approximately 18.7 m.
To know more about copper visit:
https://brainly.com/question/15314334
#SPJ11
An axle starts from rest and uniformly increases angular speed to 0.17rev/s in 31 s. (a) What is its angular acceleration in radians per second per second? rad/s 2
(b) Would doubling the angular acceleration during the given period have doubled final angular speed? Yes No
(a) The angular acceleration of the axle is approximately 0.00548 [tex]rad/s^2[/tex].
(b) No, doubling the angular acceleration would not double the final angular speed.
(a) To find the angular acceleration, we can use the formula: angular acceleration (α) = (final angular speed - initial angular speed) / time. Given that the initial angular speed is 0 rev/s, the final angular speed is 0.17 rev/s, and the time is 31 s, we can calculate the angular acceleration as follows:
α = (0.17 rev/s - 0 rev/s) / 31 s ≈ 0.00548 [tex]rad/s^2[/tex].
Therefore, the angular acceleration of the axle is approximately 0.00548 [tex]rad/s^2[/tex].
(b) Doubling the angular acceleration during the given period would not double the final angular speed. The relationship between angular acceleration, time, and final angular speed is given by the formula: final angular speed = initial angular speed + (angular acceleration * time).
If we double the angular acceleration, the new angular acceleration would be 2 * 0.00548 [tex]rad/s^2[/tex] = 0.01096 [tex]rad/s^2[/tex]. However, the time remains the same at 31 s. Plugging these values into the formula, we get:
final angular speed = 0 rev/s + (0.01096 [tex]rad/s^2[/tex] * 31 s) ≈ 0.33976 rev/s.
Comparing this to the original final angular speed of 0.17 rev/s, we can see that doubling the angular acceleration does not result in doubling the final angular speed. Therefore, the answer is No.
To learn more about angular acceleration, refer:-
https://brainly.com/question/1980605
#SPJ11
In the product F= qv x B, take q = 3, v = 2.0 I + 4.0 j + 6.0k and F = 30.0i – 60.0 j + 30.0k.
What then is B in unit-vector notation if Bx = By? B = ___
The magnetic field vector B in unit-vector notation is B = 2.5i + 2.5j, when Bx = By.
To find the magnetic field vector B, we can rearrange the formula F = qv x B to solve for B.
q = 3
v = 2.0i + 4.0j + 6.0k
F = 30.0i - 60.0j + 30.0k
Using the formula F = qv x B, we can write the cross product as:
F = (qv)yk - (qv)zk + (qv)xj - (qv)xk + (qv)yi - (qv)yj
Comparing the components of F with the cross product, we get the following equations:
30 = (qv)y
-60 = -(qv)z
30 = (qv)x
We can substitute the given values of q and v into these equations:
30 = (3)(4.0)Bx
-60 = -(3)(6.0)By
30 = (3)(2.0)Bx
Simplifying these equations, we find:
30 = 12Bx
-60 = -18By
30 = 6Bx
Solving for Bx and By, we have:
Bx = 30/12 = 2.5
By = -60/(-18) = 3.33
Since it is writen that Bx = By, we can conclude that Bx = By = 2.5.
B = 2.5i + 2.5j.
To know more about magnetic field
https://brainly.com/question/30331791
#SPJ11
A generator supplies 100 V to a transformer's primary coil, which has 60 turns. If the secondary coil has 640 turns, what is the secondary voltage? Number Units
A generator supplies 100 V to a transformer's primary coil, which has 60 turns. If the secondary coil has 640 turns, the secondary voltage is 1067 V.
The voltage ratio in a transformer is equal to the turns ratio. In this case, the turns ratio is given as:
Turns ratio = (Number of turns in secondary coil) / (Number of turns in primary coil)
Given that the number of turns in the primary coil is 60 and the number of turns in the secondary coil is 640, the turns ratio is:
Turns ratio = 640 / 60 = 10.67
The voltage ratio is the same as the turns ratio. Therefore, the secondary voltage can be calculated by multiplying the primary voltage by the turns ratio:
Secondary voltage = (Primary voltage) x (Turns ratio)
Since the primary voltage is given as 100 V, we can calculate the secondary voltage as:
Secondary voltage = 100 V x 10.67 = 1067 V
Therefore, the secondary voltage is 1067 V.
To learn more about transformer visit: https://brainly.com/question/23563049
#SPJ11