Answer: 137500 J = 138 kJ
Explanation: work W= F·s= 500 N · 275 m
What is the mass of an asteroid with a speed of 200 m/s and a momentum of 2,000 kg m/s?
A. 2200 kg
B. 10 kg
C. 400,000 kg
D. 1,800 kg
Answer:
jhnnmhunn vgu fhbiy f
Explanation:
hjbgyvfvubhjgvg
Answer:10 kg
Explanation: momentum p = mv and m = p/v
Mass m = 2000 kgm/ s / 200 m/s
.
A .63 kg ball is moving at 4.3m/s. What is the momentum of the ball?
Answer:
Given Mas (m) =63kg
velocity (v) =4.3m/s
momentum (p) =?
p=mv
63kgx4.3m/s
270.9kg.m/s
the momentum =270.9kg.m /s
If a ball of mass 0.63 kilograms is moving at 4.3 meters/seconds, then the momentum of the ball would be 2.709-kilogram meters/second.
What is momentum?It can be defined as the product of the mass and the speed of the particle, it represents the combined effect of mass and the speed of any particle.
Momentum = mass of the object × velocity of the object
As given in the problem we have to calculate the momentum of the ball if it has a mass of 0.63 kilograms and moving with a speed of 4.3 meters/seconds,
The momentum of the ball = 0.63× 4.3
=2.709 kilogram meters/second
Thus, the momentum of the ball comes out to be 2.709-kilogram meters/second.
To learn more about momentum from here, refer to the link;
brainly.com/question/17662202
#SPJ2
What is the velocity of a bus that travels 250 km in 2 hrs?
Answer:
125
Explanation:
you divide km/hrs to find your velocity.
V=km/hr
V= 250km/2hr
V=125
hope this helps !:)
please help me
A football, that has a mass of 0.43 kg, is kicked across a field at an acceleration of 0.92 m/s². What is the force used on the football?
Answer:
0.3956
Explanation:
Newton's 2nd law of motion says that Force = Mass*Acceleration (f=ma) so to find the force used on the football you multiply it's mass by its acceleration.
0.43*0.92 = 0.3956.
0.4 if you round
does anybody know what i can put for these 3 questions?
AP Physics Question
An amusement park ride consists of a large vertical wheel of radius that rotates counterclockwise on a horizontal
axis through its center, as shown above. The cars on the wheel move at a constant speed . Points and
represent the position of a car at the highest and lowest point of the ride, respectively. A person of weight sits
upright on a seat in one of the cars. As the seat passes point , the seat exerts a normal force with magnitude
on the person. While passing point , the person releases a small rock of mass , which falls to the ground
without hitting anything.
2. Which of the following best describes the passenger’s linear and angular velocity while passing point ?
A
Linear Velocity Angular Velocity
Constant Changing
B
Linear Velocity Angular Velocity
Constant Constant
C
Linear Velocity Angular Velocity
Changing Changing
D
Linear Velocity Angular Velocity
Changing Constant
The linear velocity is changing and the angular velocity is Constant best describes the passenger’s linear and angular velocity while passing a point.
What is the definition of Angular velocity?The rate of change of angular displacement is defined as angular speed, and it is stated as follows:
ω = θ t
Where,
θ is the angle of rotation,
t is the time
ω is the angular velocity
The linear velocity is given as the product of angular velocity and radius.
v=ωr
In the circular motion, the linear velocity is changing. Because the radius is changing.While the angular velocity is constant.Because it is an independent quantity.
Hence the Linear velocity is changing and the angular velocity is Constant best describing the passenger’s linear and angular velocity while passing a point.
To learn more about the angular velocity refer to the link;
https://brainly.com/question/13649539
What is your velocity if you run 100 meters away from your house and it takes you 5 seconds to run that far?
Answer:
velocity = displacement / time taken
velocity = 100/5
velocity = 20m/s
Part D The surface area of a material is a factor that affects heat conductivity. Does heat flow faster through a large surface area or through a small surface area? Why? (Hint: Think about the number of particles available to bump into one another)
Answer:
That guy is right i got a 100 as my score :)
Explanation:
Help Please!!!!!!!!!!!!!!!!!!
Help please, It's for science :>
Answer:
he tail of the arrow moves a distance of 0.5 m as the arrow is shot. yare yare daze
Explanation:
help please ill give brainly and heart !!!!
what type of system hurricanes need to form?
A ) High pressure
B ) Jet stream
C ) Low pressure
D ) Cool Dry Air
Answer:
The answer is A ) High pressure
I hope this helps you :)
please let me know if I am wrong
If a 7 kg bowling ball is lifted 2 m into the air and dropped, what speed will it strike the ground? (
Answer:
6.32m/s
Explanation:
note:Now these calculations are based in the fact that acc. due to gravity is 10m/s²
okay so I'm thinking you think the speed of a body depends on the mass of the body also,umh... well it doesn't at all!
when two bodies of different masses fall from the same height,they fall at the same time( this is just to say)
now enough of the talking let solve....
so the ball was dropped .ie from rest to the ground through a distance of 2m,
the formula for calculating the distance if a body moving in a straight line is given by:
S=ut + ½at² where u is initial velocity, a is acceleration ( of the body or due to gravity, but since its falling freely under the influence of gravity its " we use the acceleration due to gravity ,which is 10m/s²) and t is the time taken to cover the distance.
from our question the ball was dropped from rest thus its u is 0 therefore we use this equation to find the time it took to touch ground (S=½at²)
solving ....
we get t to be 0.632s
to find the speed we substitute t in the equation below:
V=u+at ,but since u=0
V=at =10•0.632=6.32m/s
therefore the speed the body uses to strike the ground is 6.32m/s
all about Henry Mosléy?
Answer:
henry moseley was an english physicist, whose contribution to the science of physics was the justification from physical laws of the previous chemical concept of the atomic number. one of his developments were of moseley's law in x-ray spectra.
Explanation:
Human resource professionals are reviewing the needs of a company that is
building a new factory. The company needs people who can weld electronic
elements together, test them, and package them securely. The HR
professionals conclude that four kinds of workers could complete this
process. Their work is the HR function of
A. employee retention
B. recruitment
C. selection
D. job design
A copper wire loop has a circular shape, with a radius a (see below). The loop is put perpendicularly to the uniform magnetic field, which changes with time according to the next function (α and β are both constant and positive): B = α + βt. Is there an electromotive force induced in the loop? If yes, calculate its value and find its direction. If not, explain why there is no electromotive force induced in the loop.
Answer:
fem = -A β
Explanation:
Faraday's law gives the induced electromotive source (emf)
fem = [tex]- \ \frac{d \phi_B }{dt}[/tex]
the magnetic flux is
[tex]\phi_B[/tex] = B. A = B A cos θ
the bold are vectros. In this case the normal to the ring is parallel to the magnetic field so the angle is zero cos 0 = 1, also the area of the ring is constant
fem = -A [tex]\frac{dB}{dt}[/tex]
we carry out the derivative of the function B = α + β t
fem = -A β
so we see that there is an electromotive force in the ring.
How does the us constitution protect democratic ideals?
Answer: These ideas, that all men are created equal and that government is based on the consent of the governed, became the foundation for the US political ideal of popular sovereignty: that the government exists to serve the people, who elect representatives to express their will.
Explanation: Hope this helped! <3
If a net force acting on a moving object causes its speed to increase, what
happens to the object's momentum?
A. It stays the same.
B. It increases.
C. It changed directions.
D. It decreases.
Answer:
It increases.
Explanation:
If a force acts in the same direction as the object's motion, then the force speeds the object up. Either way, a force will change the velocity of an object. And if the velocity of the object is changed, then the momentum of the object is changed.
what is the average of this set of data 5, 18, 8, 4, 10
answer:
9
Explanation:
add them all together then divide
What is the nergy of a wave that has a
frequency of 6.32 x 10^20 Hz?
here you go thank bob not me he will be very thankful
Which argument best explains the charge of an atomic nucleus? *
1 point
An atomic nucleus is positively charged because it is composed of neutrons.
An atomic nucleus is positively charged because it is composed of protons.
An atomic nucleus is negatively charged because it is composed of electrons.
An atomic nucleus is negatively charged because it is composed of neutrons.
Answer:
An atomic nucleus is positively charged because it is composed of protons
Explanation:
Protons carry positive charge and nucleus only contain protons
Where inside an atom are protons and neutrons located?
Answer:
They are located in the core
Explanation:
Answer:
Inside the nucleus.
Explanation:
There are three subatomic particles. Protons have a charge of 1+, a mass of 1amu, and are found in the nucleus. Neutrons do not have a charge, have a mass of 1amu, and are found in the nucleus. Electrons have a charge of 1-, have negligible mass, and can be found orbiting the nucleus in the electron cloud.
Rank the ten objects from loudest to softest.
please help me
A football player kicks a football and exerts a force on the football of 0.4 kg (m/s²). The football’s acceleration is 0.92 m/s². What is the mass of the football?
Answer:
0.368 Newtons
Explanation:
Answer:
i think it's 0.88
Explanation:
A hockey puck slides across the ice with an initial velocity of 7.3 m/s .It has a decleration of 1.1 m/s and is traveling towards the goal 5.0 m away .How much time does the goalie have to stop the puck?
Answer:
t = 6.63 s
Explanation:
Given that,
Initial velocity of the puck, u = 7.3 m/s
Deacceleration of the puck, a = -1.1 m/s²
Distance traveled, d = 5 m
We need to find the time the goalie have to stop the puck. Using equation of motion.
v = u +at
v = 0 (stops)
So,
[tex]u=-at\\\\t=\dfrac{u}{-a}\\\\t=\dfrac{7.3}{-(-1.1)}\\\\t=6.63\ s[/tex]
So, the required time is 6.63 seconds.
Metals allow electrons to flow through and complete the circuit. Therefore they are called?
Answer:
the answer would be conductors
What are sport skills sometimes referred to as?
a skill-related fitness
b. performance skills
c. health-related fitness
d. physical fitness
A sample of a low-density gas is initially at room temperature and has pressure p. The gas is warmed at constant volume until the pressure is 2p. Compared to the initial Celsius temperature of the gas, the final Celsius temperature is
Answer:
Compared to the initial Celsius temperature of the gas, the final Celsius temperature is greater by a factor of more than 2.
Explanation:
Gay-Lussac's law states that the pressure of a fixed volume of a gas is directly proportional to its temperature. In other words, if the temperature increases, the pressure will increase and if the temperature decreases, the pressure will decrease.
In summary, Gay-Lussac's law is a law that says that when the amount of gas and volume are kept constant, the quotient that exists between the pressure and the temperature will always have the same value:
[tex]\frac{P}{T}=k[/tex]
Being an initial state 1 and a final state 2, it is true:
[tex]\frac{P1}{T1} =\frac{P2}{T2}[/tex]
In this case:
P1= pT1= tP2= 2pT2= ?Replacing:
[tex]\frac{p}{t} =\frac{2p}{T2}[/tex]
Solving:
[tex]T2=2p*\frac{t}{p}[/tex]
T2= 2*t
Compared to the initial Celsius temperature of the gas, the final Celsius temperature is greater by a factor of more than 2.
A standing wave has points of constructive interference called _________ and points of destructive interference called ___________.
A. troughs, crests
B. nodes, antinodes
C. antinodes, nodes
D. crests, troughs
Answer:
The answer is nodes because nodes stay in a fixed position.
Explanation:
hope it help
srry if wrong
A standing wave has points of constructive interference called antinodes and points of destructive interference called nodes
What are constructive and destructive interferenceThis position, where the resulting wave is larger than either of the two original, is called constructive interference.
When the first wave is leading, the second wave is down and the addition of the two is zero. This is called destructive interference.
A standing wave occurs when two waves with the same properties moving in the opposite direction, in the same media, interfere with one another.
Nodes are points where the waves interact destructively, causing an appearance of the wave standing still. The opposite of nodes is antinodes where they are points of maximum displacement due to constructive destruction.
Thus the standing wave has points of constructive interference called antinodes and points of destructive interference called nodes
To know more about constructive and destructive interference, follow
https://brainly.com/question/1040831
Which phrases apply to the formation of the Grand Canyon?
Choose all that apply.
medium scale
medium scale
long-term
long-term
small scale
small scale
short-term
short-term
large scale
large scale
Answer:
Large scale
Explanation:
short term
In red shift, the wavelengths of light become?
Answer:
Explanation:god is good because the god is what it stays
god is good because the god is what it staysgod is good because the god is what it staysgod is good because the god is what it stays