The work done by the elevator over the 55 meters is easily calculable: W = mgh = (2400)(9.8)(55) = 1293600Joules. The total time of the trip can be calculated from the velocity of the elevator: t = x/v=55/18.9 = 2.91. Thus the average power is given by: P =W/t=1293600/2.91=444536 Watts
An object of mass 3.0 kg starts from rest and moves along the x-axis. A net horizontal force is applied to the object in the +x direction. The Force-time graph is shown below. What is the net impulse delivered by the applied force?
Answer:
120
Explanation:
because it is horizontal
An object of mass 3.0 kg starts from rest and moves along the x-axis. A net horizontal force is applied to the object in the +x direction. The Force-time graph is shown below. The net impulse delivered by the applied force is 102 joule.
What is force ?A force is an influence that has the power to alter an object's motion. An object with mass can change its velocity, or accelerate, as a result of a force. An obvious way to describe force is as a push or a pull. A force is a vector quantity since it has both magnitude and direction.
Force is used to describe a body's tendency to modify or change its state as a result of an external cause. When force is applied, the body can also alter its size, shape, and direction. kicking a ball, pushing and pulling on the door, or kneading dough are a few examples.
We know the Impulse = Area of the Graph
= ( 6 × 4) + 0.5 × 2 × 6
= 30 sec
For First 4 sec
Acceleration = 6 ÷ 3
= 2 m/sec²
S = 0.5 × 2 × 4²
= 16 m
Therefore, work Done = 6 × 16
= 96 J
Then, Average force
= ( 6 - 0 ) ÷ 2
= 3 N
Acceleration = 1 m/sec²
S = 0.5 × 1 × 2²
= 2 m
Work = 3 × 2
= 6 J
Total Work = 96 + 6
= 102 J
Thus, The net impulse delivered by the applied force is 102 joule.
To learn more about force, follow the link;
https://brainly.com/question/13191643
#SPJ2
what is the angle between a = 3.0i - 4.0j and b=2.0i +3.0k?
The answer is 70.6°
Which side of a cuboid should be placed on the ground to exert maximum pressure?
a) The smallest side
b) The largest side
c) The longest side
d) Each side will exert the same pressure on the ground
A cube of wood with a density of 0.780 g/cm' is 10.0 cm on each side. When the cube is placed in water, what buoyant force acts on the wood? (pw 1.00 g/cm')
The buoyant force acts on the cube of wood with a density of 0.780 g/[tex]cm^3[/tex] And 10.0 cm on each side is 7.644 Newton.
What is density?The density is the mass of a material substance per unit volume. d = M/V, where d is density, M is mass, and V is volume, is the formula for density. Grams per cubic centimeter are a typical unit of measurement for density.
As an illustration, the density of Earth is 5.51 grams per cubic centimeter, whereas the density of water is 1 gram per cubic centimeter.
Given:
The density of wood, ρ = 0.780 g/[tex]cm^3[/tex],
The Side of wood, a = 10 cm,
Calculate the buoyant force by the following formula,
F = - ρ * g * V,
Here, F is the buoyant force.
Substitute the values,
F = - 0.780 * 9.8 * [tex]10^3[/tex] * [tex]10^{-3}[/tex]
F = 7.644 Newton
Therefore, the buoyant force acts on the cube of wood with a density of 0.780 g/[tex]cm^3[/tex] is 10.0 cm on each side is 7.644 Newton.
To know more about Density:
https://brainly.com/question/6329108
#SPJ1
I know this isn’t the right subject but i need help
Expository with an a anecdote and explain how specific life even impact the character of an individual
The current state of research offers some evidence that life events can cause changes in personality traits and that various life events may connect differently to various trait domains.
What is anecdote?
A brief narrative or account abou life events changet a person or event that is typically humorous, instructive, entertaining, or biographical in nature is known as an anecdote.
How do life events change your personality?
These ideas contend that because life events alter, interrupt, or reroute people's habits of thought, feeling, and action, they have long-lasting consequences on personality traits.
Hence is a changes in personality traits a correct answer.
To know more about life events change follow the link.
https://brainly.com/question/12119018
#SPJ1
jkjkjkjkdd ds fs d fsd ds f ssfd ds a? A ??DS?D
Answer:
hjcyysjjJjxjcmxmmsxjvemmzxjdndmenbxhfnhcjdnuxjd
A planet has a radius of 5 000 km. The acceleration of free fall of the planet is 6.05 m s-2. Determine the (i) Mass of the planet
(II) Escape velocity of the planet
Answer:
Explanation:
Given:
R = 5 000 km = 5*10⁶ m
g = 6.05 m/s²
G = 6.67·10⁻¹¹ m³/(kg*c²)
______________
M - ?
V - ?
(i)
g = G·M /R²
M = g·R² / G = 6.05·(5·10⁶)² / 6.67·10⁻¹¹ ≈ 2.27·10²⁴ kg·
(ii)
V = √ (g·R) = √ (6.05·5*10⁶) ≈ 5 500 m/s = 5.5 km/s
If a 62 kg panther sits in a tree 1.3 meters above the ground, how much gravitational potential energy does it have?
If the air resistance cause the panther to lose 200 J of energy as it falls, what is the KE of the panther just before it hits the ground?
What was the velocity of the panther just before it hit the ground?
Gravitational Potential Energy , Kinetic Energy and velocity of panther just before hitting the ground will be 790.41599 J , 990.41599 J , 5.6523m/s respectively.
Mass is 62 kg with a height 1.3m .
Gravitational Potential Energy means product of mass , gravitational acceleration and height . Mathematically, GPE= mgh
GPE= 62 x 1.3 x 9.8
= 790.41599 J
Energy lost = Final energy- GPE
Final Energy Δ = 790.41599 J + 200 J
=990.41599 J
To find Velocity of panther just before hitting the ground V:-
Δ⇒mV²/2
990.41599 J= 62 V²/2
V²= {990.41599 x 2}/62
= 31.9489029
V=5.6523m/s
To know more about Gravitational Potential Energy:-
https://brainly.com/question/15978356
Which kind of wave is a wave on the electromagnetic spectrum?
O mechanical wave
O longitudinal wave
O transverse wave
O matter wave
Mechanical wave is a kind of wave is a wave on the electromagnetic spectrum.
What is electromagnetic spectrum?Electromagnetic (EM) waves are cross waves. Their vibrations or oscillations are swapped in electrical and magnetic fields at right angles to the direction of wave travel. The radiation is explained by the amount of energy found in the photons. Radio waves have photons with low energies, and microwave photons ..Electromagnetic waves with smaller wavelengths and higher frequencies include ultraviolet light, X-rays, and gamma rays. Electromagnetic waves with longer kinds of Electromagnetic Waves. Radio Waves have the longest wavelengths of all electromagnetic waves.
So we can conclude that the different types of waves are mechanical and electromagnetic waves. Mechanical waves are divided into transverse and longitudinal waves.
Learn more about electromagnetic here: https://brainly.com/question/25847009
#SPJ1
Which characteristic of Earth’s orbit are in agreement with Kepler’s second law
The features of Earth's orbit that concur with and conform to the pattern of Kepler's second law include the fact that Earth feels the largest gravitational pull when it is closest to the Sun.
In which of the following is Kepler's second law stated?According to Kepler's second rule, a planet moves in its ellipse so that a line drawn between it and the Sun and focused on it covers the same amount of space in the same amount of time.
What features distinguish the earth's orbit?The eccentricity of the Earth's orbit around the Sun, which is an ellipse, determines how far from a circle the orbit is (e). The perihelion, or point on the orbit that is closest to the Sun, and the apogee, or point most aphelion of the Sun.
To know more about Kepler's second law visit:-https://brainly.com/question/4216415
#SPJ1
A car rounding a corner has an acceleration
of 5m/s². If it rounds a corner with twice the
radius at the same speed, what would be its new
acceleration?
5/4 m/s^{2} would be its new acceleration .
What is centrifugal acceleration ?
The simplest case of circular motion is uniform circular motion, where an object moves in a circular trajectory with constant velocity. Note that the linear velocity of an object in circular motion is constantly changing because, unlike velocity, it is constantly changing direction. From kinematics we know that acceleration is a change in velocity, either in magnitude or direction, or both. Therefore, an object in uniform circular motion will always be accelerated even if the magnitude of its velocity is constant. You can feel this acceleration every time you get in the car while cornering. Keeping the handle steady while turning and moving at a constant speed creates a smooth circular motion. What you will notice is a feeling of skidding (or skidding depending on speed) out of the center of the turn.
To learn more about centrifugal acceleration , click the link below ;
https://brainly.com/question/954979
#SPJ9
On a sunny day with clear roads, Freddie is going 5 m/s over the speed limit with a deceleration of 2g and he runs a red light. What is his speed as he goes through the light?
Answer: The most widely accepted method of determining the posted speed limit is to set the speed limit at what is called the “85th percentile speed”, which is the speed at or below which 85 percent of the traffic is moving.
Explanation:
rocket launch checklist
Answer:
Checklist 1: What to Bring...Your Rocket Launch Pad & Ignition System Rocket MotorsIgnitersRecovery WaddingAltitude Tracker Your Field Box Also, it would be a good idea for the group to bring A folding card table or picnic table for rocket prep Trash Bags: try to leave your launch field cleaner than you found it. First Aid Kit: be prepared. A fly or tarp set up as a lean-to to protect the rocket prep area from the wind and/or sun.
Please choose one of the following topics and write a short summary of the concept (50-100 words). Please ask a question about the chosen topic.
Topic Chosen: DARK MATTER / DARK ENERGY
The short summary of the concept of dark matter and dark energy is given here.
What is dark matter?An estimated 85% of the universe's mass is assumed to be made up of dark matter, a hypothetical type of stuff. Because it does not appear to interact with the electromagnetic field—that is, it does not absorb, reflect, or emit electromagnetic radiation—dark matter is referred to as being "dark," making it challenging to detect.
Numerous astrophysical observations support the existence of dark matter, including gravitational effects that cannot be described by the gravity theories currently in use without the presence of more matter than can be observed. Because of this, the majority of scientists believe that dark matter is prevalent in the universe and has significantly influenced both its structure and evolution.
What is dark energy?Dark energy is an undiscovered type of energy that has the largest effects on the cosmos according to physical cosmology and astronomy. Supernova observations provided the first direct proof for its existence by demonstrating that the cosmos is expanding faster than ever rather than at a fixed rate. It is necessary to understand the universe's origins and initial elements in order to comprehend its evolution.
Learn more about dark matter here:
https://brainly.com/question/29265929
#SPJ1
Shawn and his bike have a total mass of 49.9 kg. Shawn rides his bike 0.92 km in 15.4 min at a constant velocity. The acceleration of gravity is 9.8 m/s 2 . What is Shawn’s kinetic energy? Answer in units of J.
Answer:
0 J
Explanation:
KE = .5(m)(v2-v1)
if velocity is constant v2 = v1, then v2 - v1 = 0
therefore if (v2-v1) = 0, then KE must also be equal to 0
a vector of magnitude 20 is added to a vector of magnitude 25 the magnitude of this sum might be?
Answer:
It could be 45 if the vectors are parallel.
It could be 5 if the vectors are antiparallel.
It could be between 5 and 45 for any other arrangement of these two vectors.
Suppose they are at right angles to another then the sum is
(20^2 + 25^2)^1/2 = 32
How long does it take a 100 g sample of As-81 to decay to 6.25 g? (half-life of As-81 is 33 seconds)
Answer:
Explanation:
m₀ = 100 g
m = 6.25 g
T = 33 s
_____________
t - ?
Radioactive decay constant:
λ = ln 2 / T = 0.693 / 33 ≈ 0.021 s⁻¹
Law of radioactive decay:
[tex]m=m_{0} e^{-\lambda t} \\[/tex]
[tex]e^{-\lambda t} = \frac{m}{m_0} \\[/tex]
[tex]ln (e^{-\lambda t}) = ln(\frac{m}{m_0} ) \\[/tex]
[tex]-\lambda t = ln (\frac{m}{m_0})[/tex]
[tex]t = -\frac{ln(\frac{m}{m_0}) }{\lambda}[/tex]
t = - ln (6.25/100) / 0.021 ≈ 132 s
A rubber band (in the form of a loop) is to be launched horizontally from a height of 1.0m. During the first launch, the rubber band is stretched 2.0 cm and the rubber band lands at a horizontal distance of 3.5 m from the point of launch. For the second launch the rubber band is stretched 4.0 cm. How far does it travel horizontally this time? If the same rubber band were to be stretched 4.0 cm, but aimed vertically, how high does it go?
The rubber band travels horizontally 7.0 cm in second time.
Given parameters:
the rubber band is stretched = 2.0 cm.
And, the rubber band travels = 3.5 cm.
Secondly, the rubber band is stretched = 4.0 cm.
As force is directly proportional with stretching and landing at a horizontal distance, it travels horizontally in second time
= 4.0 cm x 3.5 cm/ 2.0 cm.
= 7.0 cm.
The vertical movement can't be measured as a new gravitational force comes in play in this case.
Learn more about stretching here:
https://brainly.com/question/1171877
#SPJ1
A rocket is launched straight up with a speed of 12 meters per second near the surface of Earth. [Neglect air friction.]
Answer:
Explanation:
H = V² / (2·g)
H = 12² / (2·9.8) ≈ 7,3 m
Answer:
By conservation of energy,
Kinetic energy of launched rocket = change in potential energy of rocket at maximum height.
→ Ig h is maximum height reached:
A large water tank is completely filled with water. The tank is 3.0 m high and its surface is open. If a small hole is made on one side of the tank at a height of 0.8 m, calculate the speed with which the water comes out of the pipe.
The speed of the water through the pipe is 4.96 m/s
How to calculate the speed at which the water comes out of the pipe?Since a large water tank is completely filled with water. The tank is 3.0 m high and its surface is open. If a small hole is made on one side of the tank at a height of 0.8 m, to find the speed with which the water comes out of the pipe, we use Bernoulli's equation
What is Bernoulli's equation?Bernoulli's equation governs flows through pipes. It is given by
P₁ + ρgh₁ + 1/2ρv₁² = P₂ + ρgh₂ + 1/2ρv₂² where
P₁ = pressure at point 1,h₁ = height at point 1,v₁ = speed at point 1,P₂ = pressure at point 2,h₂ = height at point 2, andv₂ = speed at point 2Given that
P₁ = atmospheric pressure = 1.013 × 10⁵ Pa,h₁ = height of tank = 3 m,v₁ = speed at top ot tank = 0 m/s (since it is stationary there),P₂ = pressure at bottom of tank = 0 Pa,h₂ = height at hole = 0.8 m, andv₂ = speed at hole = speed of water through pipe and ρ = density of water = 1000 kg/m³So, susbstituting the values of the variables into the equation, we have
P₁ + ρgh₁ + 1/2ρv₁² = P₂ + ρgh₂ + 1/2ρv₂²
1.013 × 10⁵ Pa + 1000 kg/m³ × 9.8 m/s² × 3 m + 1/2 × 1000 kg/m³ × (0 m/s)² = 0 + 1000 kg/m³ × 9.8 m/s² × 0.8 m + 1/2 × 1000 kg/m³ × v₂²
1.013 × 10⁵ Pa + 29400kg/ms² + 0 = 0 Pa + 7840kg/ms² + 5000v²
130700 Pa = 7840kg/ms² + (5000 kg/m³)v²
130700 Pa - 7840 Pa = (5000 kg/m³)v²
122860 Pa = (5000 kg/m³)v²
Making v subject of the formula, we have
v = √(122860 Pa/5000 kg/m³)
= √(130.7/5 Pam³/kg)
= √(24.572 Pam³/kg)
= 4.96 m/s
So, the speed of the water through the pipe is 4.96 m/s
Learn more about speed of the water through the pipe here:
https://brainly.com/question/29472475
#SPJ1
What kind of organisms do binary fission?
Answer:
Prokaryotes such as E. coli, Archaea as well as eukaryotes such as euglena reproduce through binary fission.
Explanation:
Answer:
Prokaryotes such as E. coli, Archaea as well as eukaryotes such as euglena reproduce through binary fission.
Explanation:
A lorry pulls forward after initially being stationary, it takes the lorry 40m to reach a speed of 8m/s, calculate the lorry’s acceleration.
Answer:
0.8m/s²
Explanation:
we know,
v² = u² + 2as
here v is final velocity, u is initial velocity, a is acceleration & s is distance travelled.
8² = 0² + 2*a*40
⇒ 64 = 80a
⇒a = 64/80 = 0.8m/s²
The absolute Temprature of an ideal diatomic gas is quadrupied. What happens to the average sp eed of molecules?
If the absolute temperature of an ideal diatomic gas is quadrupled, then, the average speed of molecules is doubled.
[tex][V_avg=\sqrt(8k *4T)/\pi m],[V_avg=2\sqrt(8kT) \pi m],[V_avg=2v_avg][/tex]
Speed (often abbreviated as "s") is a scalar variable that describes how much an object's location changes over time or how much it changes per unit of time. The average speed of an item in a period of time is the distance traveled by the object divided by the duration of the period.
Time divided by distance are the speed-related metrics.. The meter per second (m/s) is the SI unit of speed, while the kilometer per hour (kph) is the most often used unit of speed in daily life.
To know more about speed visit : brainly.com/question/93357
#SPJ9
two solid spheres of radius R made os same steel is placed in contact and exerts a force of f1. if the radius is 3R, what will be the magnitude of gravitational force
The magnitude of the gravitational force 0f two solid sphere of radius R is 81F₁ newton.
Gravitational force :
Any two bodies' mutual attraction is directly proportional to the sum of their masses and inversely proportional to the square of their separation.
Force is given as :
F₁ = (G x m x m )/ (2r)²
To calculate gravitational force :
F₂ = G x [27m x 27m]/ [6r]²
F₂ = (G x27)² m² / 36r²
F₂ = (81 G x m²) / 4r²
F₂ = 81F₁
The magnitude of the gravitational force of two solid sphere of radius R is 81F₁ newton.
To know more about gravitational force :
https://brainly.com/question/12528243
#SPJ1
Superman must stop a 120−km/h train in 150 m to keep it from hitting a stalled car on the tracks. If the train’s mass is 3.6×105 kg, how much force must he exert? Compare to the weight of the train (give as %). How much force does the train exert on Superman?
The force that Superman must exert is -1.33 * 10⁶ N
The force that must be exerted by Superman is 37.6 % of the weight of the train.
The force the train exerts on superman is 1.33 * 10⁶ N
What is the average acceleration of the train?The average acceleration of the train is determined from the equation of motion as follows:
v² = u² + 2as
where
v is final velocity = 0 m/s
u is initial velocity = 120 km/h
To convert km/h to m/s, we multiply km/h by 1000/3600
u = 120 * 1000/3600
u = 33.3 m/s
a = ?
s = 150 m
a = v² - u² / 2s
a = 0 - 33.3² / 2 * 150
a = 3.696 m/s²
Force that must be exerted will be:
Force = mass * accelerationForce = 3.6 × 10⁵ * 3.696 m/s²
Force = -1.33 * 10⁶ N
b. Weight of train = 3.6 × 10⁵ * 9.81
Weight of train = 3.53 * 10⁶ N
The ratio of the force and the weight of the train = (-1.33 * 10⁶ / 3.53 * 10⁶) * 100%
The ratio of the force and the weight of the train = 37.6%
Learn more about force and acceleration at: https://brainly.com/question/14343220
#SPJ1
You are walking toward the back of a bus that is moving forward with a constant velocity. describe your motion relative to the bus and a point on the ground
You are travelling towards the back of the bus. If your walking speed is slower than the speed of the moving bus (which it generally is), your motion relative to a point on the ground will be travelling in the same direction as the moving bus, but at a slower rate.
What is speed?
Speed can be defined as the distance travelled by an object in relation to the time it takes to travel that distance. In other words, it measures how rapidly an object moves but does not provide direction. When we get direction with speed, we term it "velocity."
The SI unit system is most typically used to express speed. Speed is measured in metres per second, or m/s, because distance is measured in metres and time is recorded in seconds.
Speed is measured in metres per second (ms-1) and is symbolised by the letter "s."
The distance travelled is denoted by d and measured in meters (m).
The distance travelled per unit of time is referred to as speed. It is the rate at which an object moves. The magnitude of the velocity vector is represented by the scalar quantity speed. It lacks a sense of direction. A higher speed indicates that an object is travelling faster. Lower speed indicates that it is travelling more slowly. It has zero speed if it is not moving at all.
Learn more about speed from given link
https://brainly.com/question/13943409
#SPJ1
Whitch is true of high resistsncce wires
The longer a wire is, the higher the resistance will be.
Neither length (L) nor cross-sectional area (A) influences Rh. It totally depends on the type of material used to make the wire. It is somewhat dependent on temperature variation, but this variation is negligible and is disregarded for most purposes.
Let Resistivity be Rh and Resistance be R.
L for the wire's length and A for its cross-section.
This formula relates to resistance.
R=Rh*L/A
Rh, L, and A are the three parameters that determine resistance.
The resistance increases as the wire lengthen.
Less resistance is there the larger the cross-sectional area. (Put A in the denominator; the numerator is L.)
Only take into account the Length variable. As was previously said, shorter wires have lower resistance and vice versa.
Learn more about resistance here:
https://brainly.com/question/17562635
#SPJ1
Give causes, Prevention and cure of diseases of Respiratory System.
any volunteer?
In respiratory system, Airflow from the lungs becomes obstructed due to chronic inflammatory lung disease called chronic obstructive pulmonary disease (COPD).
Respiratory system :
The network of organs and tissues that aids in breathing is known as the respiratory system.
The most common respiratory diseases are :
asthmachronic obstructive pulmonary diseasecystic fibrosislung cancertuberculosisbronchitisProblem causes respiratory system are :
tobacco smoking air pollution allergensoccupational risksPrecautions of respiratory system diseases :
Do not smoke. Improve the indoor air quality .Exercise. Do breathing exercises.regular hand washing.Do not exchange personal items.In respiratory system, Airflow from the lungs becomes obstructed due to chronic inflammatory lung disease called chronic obstructive pulmonary disease (COPD).
To know more about respiratory system:
https://brainly.com/question/1968554
#SPJ1
A sports car accelerates from rest to 103 km/h in 6.5 s. What is its average acceleration in m/s2?
The acceleration of the car is 57.04 [tex]m/s^{2}[/tex]
It is given that a sports car accelerates from rest to 103 km/h in 6.5 s.
So, Initial velocity (u) = 0 m/s { since the car starts from rest }
Final velocity (v) = 103 km/hr = 103 * 18/5 m/s = 370.8 m/s
Now, the time taken (t) = 6.5 seconds.
Acceleration is the measure of how fast the object's velocity changes with respect to time.
Now, Acceleration (a) = Change in velocity/Time taken
So,
[tex]a = \frac{v -u}{t}[/tex]
Putting all the values, we get
[tex]a = \frac{370.8 - 0}{6.5} =\frac{370.8}{6.5} = 57.04[/tex]
Hence, the acceleration of the car is 57.04 [tex]m/s^{2}[/tex]
To read more about acceleration, visit https://brainly.com/question/12550364
#SPJ1
a mass of 2kg is supported by two cords which makes angle 30 degree and 50 degree with the vertical. calculate the tension in the two cords
So, this is the diagram of the described situation, the strings are attached to a rigid support at their one end and the other end is connected to the particle.
Let, the string making an angle of 45 with the horizontal has a tension of T 1 and
the one making an angle of 30 has a tension of T2.
Now,
what we have done is that we have taken the vertical and
horizontal components of the tension in the two strings.
Now,considering the system to be in equilibrium,
see the diagram,the vertical component of the strings i.e
(T 1 sin 45 & T 2 sin 30) together will act to balance the weight of
the particle(mg)
So,we can say, T 1 sin 45 + T 2 sin 30 = mg. ...(1)
From horizontal equilibrium,we can say, T 1 cos 45 must balance T 2 cos 30 ,
as no other force is present in horizontal direction.
So,T 1 cos 45 = T 2 cos 30. ...(2)
Given,
mg = 10 ⋅ 10 = 100N
So, solving equation 1 & 2 we get,
T 1 = 89.65N and, T 2 = 73.20N