From the calculations, the acceleration of the elevator is obtained as 1.5m/s^2
What is acceleration?The term acceleration has to do with the rate of change of velocity with time.
Given that;
u = 9.2 m/s
v = 15.8 m/s
t = 3.8
a = ?
The v = u + at
a = v - u/t
a = 15 - 9.2/3.8
a = 1.5m/s^2
Learn more about acceleration:https://brainly.com/question/12550364
#SPJ1
State and prove bessel inequality
Answer:
hope this helps and if you have any questions please feel free to ask me any time
Statement :- We assume the orthagonal sequence [tex]{{\{\phi\}}_{1}^{\infty}}[/tex] in Hilbert space, now [tex]{\forall \sf \:v\in \mathbb{V}}[/tex], the Fourier coefficients are given by:
[tex]{\quad \qquad \longrightarrow \sf a_{i}=(v,{\phi}_{i})}[/tex]
Then Bessel's inequality give us:
[tex]{\boxed{\displaystyle \bf \sum_{1}^{\infty}\vert a_{i}\vert^{2}\leqslant \Vert v\Vert^{2}}}[/tex]
Proof :- We assume the following equation is true
[tex]{\quad \qquad \longrightarrow \displaystyle \sf v_{n}=\sum_{i=1}^{n}a_{i}{\phi}_{i}}[/tex]
So that, [tex]{\bf v_n}[/tex] is projection of [tex]{\bf v}[/tex] onto the surface by the first [tex]{\bf n}[/tex] of the [tex]{\bf \phi_{i}}[/tex] . For any event, [tex]{\sf (v-v_{n})\perp v_{n}}[/tex]
Now, by Pythagoras theorem:
[tex]{:\implies \quad \sf \Vert v\Vert^{2}=\Vert v-v_{n}\Vert^{2}+\Vert v_{n}\Vert^{2}}[/tex]
[tex]{:\implies \quad \displaystyle \sf ||v||^{2}=\Vert v-v_{n}\Vert^{2}+\sum_{i=1}^{n}\vert a_{i}\vert^{2}}[/tex]
Now, we can deduce that from the above equation that;
[tex]{:\implies \quad \displaystyle \sf \sum_{i=1}^{n}\vert a_{i} \vert^{2}\leqslant \Vert v\Vert^{2}}[/tex]
For [tex]{\sf n\to \infty}[/tex], we have
[tex]{:\implies \quad \boxed{\displaystyle \bf \sum_{1}^{\infty}\vert a_{i}\vert^{2}\leqslant \Vert v\Vert^{2}}}[/tex]
Hence, Proved
Question: How does a lunar eclipse occur? What evidence can you provide to explain that?
Think!!!! Write Claim, Reasoning and add evidence.
Answer:
Claim: Lunar eclipses occur when Earth passes between the Sun and the Moon, blocking the sunlight falling on it.
Evidence: A lunar eclipse is caused by Earth blocking sunlight from reaching the moon and casting a shadow across its surface. A lunar eclipse occurs when the Moon and Sun are on opposite sides of Earth. Sun-blocking Earth casts two shadows on the moon: The umbra is a full, dark shadow, and the penumbra is a partial shadow. Lunar eclipses can be divided into two types: total and partial. A total lunar eclipse occurs when the Moon and Sun are on opposite sides of Earth. A partial lunar eclipse happens when only part of Earth's shadow covers the Moon.
Reasoning: The Moon moves into the shadow of the Earth during a lunar eclipse. This can occur only when the Sun, Earth, and Moon are exactly or very closely aligned (in syzygy) with Earth between the other two, which can happen only on the night of a full moon when the moon is near either lunar node.
Hope this helps you czn!!
Please Mark me Brainleast!!!!!!!!!!
Answer:
Claim: Lunar eclipses occur when Earth passes between the Sun and the Moon, blocking the sunlight falling on it.
Evidence: A lunar eclipse is caused by Earth blocking sunlight from reaching the moon and casting a shadow across its surface. A lunar eclipse occurs when the Moon and Sun are on opposite sides of Earth. Sun-blocking Earth casts two shadows on the moon: The umbra is a full, dark shadow, and the penumbra is a partial shadow. Lunar eclipses can be divided into two types: total and partial. A total lunar eclipse occurs when the Moon and Sun are on opposite sides of Earth. A partial lunar eclipse happens when only part of Earth's shadow covers the Moon.
Reasoning: The Moon moves into the shadow of the Earth during a lunar eclipse. This can occur only when the Sun, Earth, and Moon are exactly or very closely aligned (in syzygy) with Earth between the other two, which can happen only on the night of a full moon when the moon is near either lunar node.
Hope this helps you czn!!
Please Mark me Brainleast!!!!!!!!!!
A person in a hurry averages 70mph on a trip covering a distance of 500 m. what time was required to travel that distance?
The time required to travel that distance at the given speed is determined as 15.84 seconds.
Time of motionThe time of motion of the person is calculated as follows;
Distance = speed x time
time = distance/speed
where;
distance = 500 m = 0.31 miletime = (0.31 mile)/(70 mph)
time = 0.0044 hr = 15.84 seconds
Thus, the time required to travel that distance at the given speed is determined as 15.84 seconds.
Learn more about time here: https://brainly.com/question/10428039
#SPJ1
the resistivity of
Copper is 1.7x10^-8ohm-m
What is the Current
density, J in the Copper
When placed inside a
Souce supply of 12v?
The current density of the copper wire is determined as (7.059 x 10⁸ A/m²)/L
Current density of the copper wire
The current density of the copper wire is calculated as follows;
J =1/ρ(E) = 1/ρ(V/L)
where;
E is electric fieldV is voltageL is length of the wireCurrent density the wireJ =1/ρ(E) = 1/ρ(V/L)
J = (1/1.7 x 10⁻⁸) x (12)/L
J = (7.059 x 10⁸ A/m²)/L
Learn more about current here: https://brainly.com/question/24858512
#SPJ1
two forces x and y are acting at 120 degrees to each other, if the magnitude are 8N and 10N respectively determine their resultant
The resultant force of both forces is 15.62 N.
What is resultant?The Resultant of forces is a single force obtained when two or more forces are combined.
To calculate the resultant of the force, we use the formula below.
Formula:
R = √[a²+b²-2abcos∅]..................... Equation 1Where:
R = Resultant of the forces.∅ = Angle between both forcesFrom the question,
Given:
a = 8 Nb = 10 NSubstitute these values into equation 1
R = √[8²+10²-2×8×10cos120°]R = √[64+100-160cos120°]R =√ [164-160(-0.5)]R = √[164+80]R = √(244)R = 15.62 NHence, the resultant force of both forces is 15.62 N.
Learn more about resultant force here: https://brainly.com/question/25239010
#SPJ1
Using the parallelogram law of vectors to obtain the resultant, we have the value 16 N.
What is the resultant force?The resultant force is that force that has the same effect in magnitude and direction as two forces acting together. In this case, we have two forces , 8 N and 10 N inclined at an angle of 120 degrees
Using the parallelogram law of vectors to obtain the resultant;
R = √([8²+10²)-2×8×10cos120°]
R = √164 +80
R = 16 N
Learn more about resultant force:https://brainly.com/question/16380983
#SPJ1
Make a 1000-cm³ container. What
will be the dimensions of the
length, width, and height? How
much water will this container
hold? What is the mass of this
amount of water?
Answer:
see below
Explanation:
OK....here is one :
L W H
10 x 10 x 10 cm = 1000 cm^2 this is a cube
the container will hold the volume of 1000 cm^3 of water
which will have a mass 1 kg ( this is a liter)
Ultrasound is used to scan the unborn baby of a pregnant mother.
The detector receives an echo from the skull of the fetus 58 us after the pulse leaves the ultrasound
scanner.
Calculate the distance from the ultrasound scanner to the skull to 2 significant figures.
Give the unit for your answer.
(The speed of ultrasound in soft tissue is 1540 m/s
Predict the gravitational force between two 15-kg balls whose centers are 35 m apart.
[tex]F=G\frac{m_1-m_2}{r^2}[/tex]
[tex]=\frac{(6.67\times10^{-11}N*m/kg^2)(15kg) }{(0.35m)^2}[/tex]
[tex]=1.2\times10^{-7} N[/tex]
Because the weight of one ball is mg = 147 N, the gravitational force between the two balls is [tex]1.2\times10^{-7}N[/tex] or [tex]8.4*10^3[/tex] parts per billion of the weight.
Electron grops could be considered which of the following
Answer:
Electron groups could be considered as Lone pair electrons and bonded pairs of electrons.
Answer: Option D & B
Explanation:
The two or more electrons can be bonded by single bond, double bond, covalent bond of electrons can simply be lone pair of electrons. Unshared pair of electrons are generally termed as lone pair of electrons in an atom which are generally present in the outermost shell of atoms. Hence electron groups can be determined by bonded pairs and lone pairs of electrons.
I got this from another brainly user
When a metal sphere is dropped in to a tall cylinder containing liquid its acceleration is g/2 (gravity over 2). Shaow that : density of metal =2density of liquid
Answer:
Fm is the net force down on the metal in air
Fm / 2 is the net force down on the metal in liquid
Fl is the buoyant force on the metal due to liquid
Fm - Fl = Fm / 2 equating upward and downward forces
Fm / 2 = Fl
The specific gravity of the metal is twice that of the liquid
Note: F = M g = ρ V g since ρ = M / V
Kinetic energy is energy that is stored and not moving
O True
O False
When the eyes are closed, what sensory organs provide such information?
Answer:
Explanation:
the inner ears and proprioreceptors
50 POINTS URGENT HELP NEEDED SPACE
Conclusion:
Your conclusion will include a summary of the lab results and an interpretation of the results. Please answer all questions in complete sentences using your own words.
Using two to three sentences, summarize what you investigated and observed in this lab.
You completed three terra forming trials. Describe the how the sun's mass affects planets in a solar system. Use data you recorded to support your conclusions.
In this simulation, the masses of the planets were all the same. Do you think if the masses of the planets were different, it would affect the results? Why or why not?
How does this simulation demonstrate the law of universal gravitation?
It is the year 2085, and the world population has grown at an alarming rate. As a space explorer, you have been sent on a terraforming mission into space. Your mission to search for a habitable planet for humans to colonize in addition to planet Earth. You found a planet you believe would be habitable, and now need to report back your findings. Describe the new planet, and why it would be perfect for maintaining human life.
DATA BELOW
sun's mass 1x—Trial One
1
5
2
3
1
1
sun's mass 1x—Trial Two
1
2
0
0
2
2
sun's mass 2x—Trial One
1
0
0
0
1
0
sun's mass 2x—Trial Two
1
3
2
0
4
0
sun's mass 3x—Trial One
1
2
0
0
2
0
sun's mass 3x—Trial Two
1
0
0
0
1
3
Answer:
Using two to three sentences, summarize what you investigated and observed in this lab. I investigated that Most of my planets and moons had the element carbon in them. I observed that Different elements absorb different wavelengths of light.
Astronomers use a wide variety of technology to explore space and the electromagnetic spectrum; why do you believe it is essential to use many types of equipment when studying space?
It is essential to use a number of telescopes sensitive to different parts of the electromagnetic spectrum to study objects in space. Even though all light is fundamentally the same thing, the way that astronomers observe light depends on the portion of the spectrum they wish to study. Tools are useful, such as detectors that help see the different wavelengths of light. Not all light can get through the Earth's atmosphere, so for some wavelengths we have to use telescopes aboard satellites.
If carbon was the most common element found in the moons and planets, what element is missing that would make them similar to Earth? Explain why. (Hint: Think about the carbon cycle.)
The missing element that would make moons and other planets similar to earth is oxygen. The two make carbon dioxide.
We know that the electromagnetic spectrum uses wavelengths and frequencies to determine a lot about outer space. How does it help us find out the make-up of stars?
electromagnetic radiation Explanation, astronomers observe the wavelengths by putting telescopes on mountain tops and take results of what they are seeing
Why might it be useful to determine the elements that a planet or moon is made up of?
It might be useful so we can make new discoveries of life or even plants on other planets and moons. And discover maybe even more moons one other planets.
Hope this helps!!!!
Explanation:
why is electric current scalar quantity with having direction ?
Explanation:
It represents the direction of flow of positive charge but is treated as a scalar quantity because current follows the laws of scalar addition and not the laws of vector addition. The angle between the wires carrying current does not affect the total current in the circuit.
Answer:
It represents the direction of flow of positive charge but it is treated as a scalar quantity because current follows the laws of scalar addition and not the laws of vector addition, because the angle between the wires carrying current does not affect the total current in the circuit.
If u add 1.362 and 25.2 what is the correct answer?
Answer:
26.562
Explanation:
1+25= 26
0.362+0.2= 0.562
26+0.562= 26.562
or just use a calculator
A car starts from rest and coasts down a hill with a constant acceleration.If it goes 90m in 8s,find the acceleration and velocity after 8s.
a car travels at 50 m/s for first 20 seconds , 30 m/s for next 30 seconds and finally 20 m/s for next 10 seconds . find its average speed
The average speed traveled by car is [tex]35m/s[/tex].
[tex]1^{st}[/tex] case
Speed[tex]=50m/s\\[/tex]Time [tex]=20s[/tex]Distance [tex]=[/tex] [tex]speed*time= 50*20=1000m[/tex]
[tex]2^{nd}[/tex] case
Speed[tex]=30m/s[/tex]Time[tex]=30s[/tex]Distance[tex]=30*30=900m[/tex]
[tex]3^{rd}[/tex] case
Speed[tex]=20m/s[/tex]Time[tex]=10s[/tex]Distance[tex]=20*10=200m[/tex]
Now, The total distance[tex]=(1000+900+200)m=2100m[/tex]
Total time[tex]=(20+30+10)s=60s[/tex]
Average distance [tex]=\frac{total distance}{total time} = \frac{2100}{60}=35m/s[/tex]
To learn more about Average speed, refer to:
https://brainly.com/question/21097620Which statement best defines work? (2 points) Group of answer choices
-Work is the time it takes to move an object once acted upon by a force.
-Work occurs when balanced forces act on an object and cause movement in the direction of these forces.
-Work occurs when a force causes motion of an object, and this motion is in the same direction of the applied force.
-Work is the distance over time that an object moves once acted on by a force.
Answer:last choice is correct. Work is equally to force times distance
Explanation:to generalize, W is equal to to force as a function of distance integrated over distance. Work is equivilent to energy. See work/force equivalency
what kind of soil is most likely found in the desert
A lizard climbs up a building 15.5 m and then turns around and goes down the bulding 23.7 m. This takes the lizard 31.5s. what is the average velocity of the lizard?
1.24 m/s Down
0.26 m/s Down
258 m/s Down
3.8 m/s Down
The average velocity of the lizard for the whole journey is 0.26 m/s Down.
What is average velocity?The term average velocity has to do with the velocity of the lizard for the whole journey. We can see that the downward displacement is greater than the upward displacement.
Thus;
Velocity = displacement / time = 23.7 m - 15.5 m/31.5s = 0.26 m/s Down.
Thus, the average velocity of the lizard for the whole journey is 0.26 m/s Down.
Learn more about velocity:https://brainly.com/question/13639113
#SPJ1
Calculate how many half-lives are required for a number of radio-active nuclei to decrease to one-millionth of
the initial number.
Answer:
it would depend on which element u would be considering
Explanation:
as helium , oxygen , carbon ,sodium and other would be easier while plutonium , americium and other very radioactive elements would be harder
Answer:
~ 20 half lives
Explanation:
(1/2) ^n = 1/1,000,000 n = number of half-lives
LOG both sides to get
n LOG 1/2 = -6
n = -6/(LOG (1/2)) = 19.931 or approx 20 half lives
A concave mirror has a radius of curvature of 1.6m. Find the focal length
Answer:
given,
Radius of curvature of concave mirror = 1.6m
We know that ,
Focal length = radius/2
Hence ,
Focal length of concave mirror = radius of concave mirror /2
=> F = 1.6/2
=> F = 0.8m
Hence the focal length of concave mirror is 0.8 m
Explanation:
Andrea is investigating how increasing the concentration of sugar affects the boiling point of the solution. What would be the best way to present the results to help Andrea see if there is a pattern?
An increase in the concentration of sugar in a solution leads to the increase in boiling point of the solution.
What is boiling point?Boiling point of a solution is that pressure exerted on a liquid by its surrounding is equal to the vapour pressure of the liquid.
When there is an increase in concentration of solute, more space will be occupied in the fluid leading to an increase in the boiling point of the fluid.
Therefore, An increase in the concentration of sugar in a solution leads to the increase in boiling point of the solution.
Learn more about boiling point here:
https://brainly.com/question/40140
#SPJ1
The area under a force-time graph represents
Answer:
Area under force time graph gives ‘impulse ‘
For thousands of years people thought that heavier objects fell faster than lighter objects. In fact, this is something that we can sometimes observe in our everyday lives. But according to Galileo this is wrong! His Law of Falling Bodies says that all objects fall at the same rate. After watching the assigned video please comment on how it is possible that Galileo's theory says one thing but our everyday experience says something else.
Answer:
See below
Explanation:
Gallileo is CORRECT in a vacuum where there is no air friction
air friction affects same or different weight objects differently and will cause same-weight or different weight objects to fall at different speeds
According to the law of conservation of energy, which changes would INCREASE the total energy of a system?
A. An addition of 400 J of thermal energy and a loss of 550 J of kinetic energy
B. An addition of 200 J of thermal energy and a loss of 550 J of thermal energy
C. An addition of 300 J of GPE and a loss of 450 J of thermal energy
D. An addition of 500 J of kinetic energy and a loss of 450 J of thermal energy
The changes that would increase the total energy of a system is an addition of 500 J of kinetic energy and a loss of 450 J of thermal energy.
What is conservation of energy?The term conservation of energy means that energy can not be created nor destroyed.
In this case, the changes that would increase the total energy of a system is an addition of 500 J of kinetic energy and a loss of 450 J of thermal energy.
Learn more about conservation of energy:https://brainly.com/question/2137260
#SPJ1
Which statement about bout waves is correct?
Answer:
In light waves, the electromagnetic fields oscillate perpendicular to the direction of propagation. Hence, sound waves are longitudinal waves whereas light waves are transverse waves.
Find the volume of the irregular object a marble
By using Displacement method we can find volume of irregular object like marble.
What is displacement method?In displacement method,
First , we measuring the volume of water displaced by an object which tell us the volume of the object.
Secondly We can use the physical balance to determine its mass.
Lastly , calculate the density by dividing the mass by the volume.
Procedure to find the Volume of irregular object i.e. marble
step 1 - Fill the graduated cylinder about half full and measure the initial volume of water.
step 2 - Drop the marble in the graduated cylinder.
step 3 -Now measure the final level of water.
Step 4 - Subtract both the values.
Here , comes the Volume of Irregular Object.
For more volume related question visit here:
https://brainly.com/question/1578538
#SPJ1
What is the average translational kinetic energy of nitrogen molecules at 1600 K? A. 1.31x10-20 J. B. 2.31x10-20 J. C. 3.31x10-20 J. D. 4.31x10-20 J.
KE
5/2KTFor nitrogen n=5
So
5/2(1.38×10^{-23})(1600)5500×10^{-23}5.5×10^{-20}JUse the drop-down menus to complete each sentence.
The height of the cylinder is manipulated. This is the
variable.
The temperature of the water changes as the height of the cylinder changes. The temperature of the water is therefore the
variable.
A “constant” is a parameter that stays the same regardless of the variables. One parameter of the system that is held constant is the
.
One parameter of the system that is held constant that can be considered is the mass of the water.
What is a constant?In science, the constant is a type of unmodified variable that remains equal along with the experimental procedure.
The constants of a particular system must be considered and they cannot change in experiments or observations.
In conclusion, one parameter of the system that is held constant that can be considered is the mass of the water.
Learn more about the constant of the system here:
https://brainly.com/question/17367653
#SPJ1