An electric immersion heater is put at the bottom of a large tank of water the water next to the heater becomes warm then warmed water next to the heater energy will travel up from the heater through the particles
The water is heated up from the inside and usually with electricity a strong electric current run through a large element inside the tank to directly heat the water around it and energy will travel up from the heater through the particles and making them faster and further apart and meaning they become less dense and when water is heated with immersion heater the water become less dense due to which the warm water rises up and the cooler water fill its space
Know more about heater
https://brainly.com/question/23719307
#SPJ1
a sculpted has prepared a mold for casing a silver figure. The figure has a volume of 225 cubic cm. how many ounces of silver are needed in the preparation of the silver figure?
83.246 ounces of silver is required to make the silver figure.
It is given that 10.49 g/cm^3 is the density of silver at Room temperature and the volume of Silver is 225cm^3.
To prepare silver of 225cm^3 of volume, we require the following:
Density = Mass/Volume
Mass = Density x Volume
Amount of silver = 10.49x225
Amount of silver = 2360.25 g
We know that,
100g = 3.5274 ounces
Then,
= 3.5274/100
= 0.035274 ounces of silver.
The mass of silver required in ounces = 2360.25 x 0.035274
The mass of silver in ounces = 83.246 ounces.
Therefore the mass of silver needed in ounces is 83.246 ounces. Through this conversion, the amount of any substance can be converted from kilograms to ounces.
To know more about pounds, click below:
https://brainly.com/question/25973294
#SPJ9
Draw the Lewis structure of CH3CCH and then choose the appropriate set of
hybridization states for the three central atoms. Your answer choice is independent of the orientation of your drawn structure.
Lewis structure of CH₃-CCH and then hybridization states for the three central atoms is sp³sp³ and sp
A Lewis structure is a very simplified representation of the valance shell electron in a molecule and it is used to show how the electron are arranged around individual atom in a molecule and in propyne there is 3 carbon and in that one carbon is triply bonded so this triply bonded carbon is sp and 2 singly bonded are sp³ hybridized
And the Lewis structure of propyne are
Know more about hybridization
https://brainly.com/question/17102269
#SPJ1
Select one element from the periodic table and describe its most common isotopes. Then select one of the isotopes and characterize how this isotope impacts the environment and/or living organisms.
Identify the various isotopes of the element you selected and include the percent abundance for each.
Identify the number of protons, electrons, and neutrons for each isotope.
Include an image or drawing of the isotope notation for each.
Describe how your selected isotope can be used as a research tool in environmental science or medicine.
Properly cite any sources that you use to support your ideas (you should use at least one source)
The element selected is carbon and the isotopes are carbon-12, carbon-13, and carbon-14.
The number of protons, electrons, and neutrons for each isotope of carbon are as follows:
carbon-12 - 6 electrons, 6 protons, and 6 neutronscarbon-13 - 6 electrons, 6 protons, 7 neutronscarbon-14 - 6 electrons, 6 protons, and 8 neutronsThe isotope notation for each is¹²₆C, ¹³₆C, and ¹⁴₆C.
The carbon-14 isotope is used in the radioactive dating of substances.
What are isotopes?Isotopes are atoms of the same element that differ from each other in their masses.
Isotopes of the same element have different masses as a result of the difference in the number of neutrons in the nucleus of the atoms of the element.
The existence of isotopes of elements accounts for why the atomic masses of elements are not whole numbers.
Learn more about isotopes at: https://brainly.com/question/12694278
#SPJ1
matter with no definite volume and no definite shape is a what?
The state of matter with no definite volume and no definite shape is gas.
What is matter?Matter is anything that has mass and occupies space.
There are three main physical states in which matter can exist. Each of these physical states has unique properties that are used to identify them.
The three physical states of matter are:
Solids - solids have an ordered arrangement of molecules. They have a definite shapes and volumeLiquids - Liquids do not have a definite shape as a result of a weaker force of attraction between the molecules. However, they have a definite volume.Gases - gases do not have a definite shape or volume as a result of negligible forces of attraction between their molecules.Learn more about states of matter at: https://brainly.com/question/3998772
#SPJ1
In silicon dioxide how many covalent bonds are there between each silicon atom with oxygen atoms?
In silicon dioxide the number of the covalent bonds are there between each silicon atom with oxygen atoms is four.
In the silicon dioxide the total number of covalent bond is four between the each silicon atom with the oxygen atoms. The covalent bond is form when the two atoms mutually share the electrons and bond together. the compound which form covalent bond is called as covalent bond. the silicon dioxide form covalent bond because the electronegative difference between silicon and the oxygen is not much.
Thus, In silicon dioxide the number of the covalent bonds are there between each silicon atom with oxygen atoms is four.
To learn more about covalent bond here
https://brainly.com/question/10777799
#SPJ9
This element has 66 electrons in its electron cloud.
Answer:
below
Explanation:
From periodic table this is dysprosium
Which of the following reactions demonstrates a synthesis reaction?
A. Zn + 2HCl > ZnCl2 + H2
B. C+02 > CO2
C. Mg + H2SO4 > MgSO4 + H2
D. 2NaCl > 2Na + Cl2
Option is the right response because it indicates a synthesis reaction (D) 2Na+Cl2 > 2NaCl.
What is a Synthesis Reaction?Synthesis reactions are those that take place when two distinct molecules or atoms interact to create a new chemical or molecule. Whenever a synthesis reaction takes place, energy is often released, as well as the process is exothermic. whenever two or more components (compounds or elements) mix to create a new product, a compound having new qualities. They synthesize to create a new material, which is why the process is known as a synthesis.
Why is synthesis reaction important and its functions?Bonds connecting two substances are formed during synthesis reactions. As a result, you may want to think about synthesis reactions as processes that help your body create things. Because of this, we can see that synthesis reactions are crucial for both body growth and tissue healing.
A descriptive statement over ranges of selected variables for input and output is the basis for functional synthesis (FS), which tries to produce an implementation. As is customary, FS tasks were formulated as "all exists" equations, wherein input variables are quantified across the board & output variables are quantified existentially.
To know more about Synthesis Reaction visit:
https://brainly.com/question/24905694
#SPJ1
Answer:
C+02 > CO2
Explanation:
hope this helps-
The specific gravity of iron is 7.87, and the density of water at 4.00 ∘C is 1.00 g/cm3 . You can use this information to find the density of iron.
Find the volume occupied by 6.50 g of iron
The volume occupied by the given mass of iron is 0.83 [tex]cm^{3}[/tex].
What is the specific gravity?The term specific gravity has to do with the ratio of the density of an object to the density of water. We must note that density of water is the bench mark that have been used to obtain the densities of every other substances hence it was assigned a density of 1.00 g/ [tex]cm^{3}[/tex].
Now we know from the question that;
Density of water = 1.00 g/ [tex]cm^{3}[/tex]
Specific gravity of iron = 7.87
Mass of the iron = 6.50 g
Density of iron = Specific gravity * density of water = 7.87 * 1.00 g/ [tex]cm^{3}[/tex]
= 7.87 g/ [tex]cm^{3}[/tex]
Given that;
Density = mass/volume
volume = mass/Density
volume = 6.50 g/7.87 g/ [tex]cm^{3}[/tex]
Volume = 0.83 [tex]cm^{3}[/tex]
We can see that from the calculations, the density of the iron as is clear in the procedure is 7.87 g/cm3 and it has a volume of 0.83 cm3 .
Learn more about density:https://brainly.com/question/15164682
#SPJ1
Consider the reaction
2H2+O2⟶2H2OΔ rxn=−484 kJ
Which answer best describes the transfer of heat that occurs when 1.50 mol H2 reacts?
The true statement is that 363 kJ of heat is evolved in the process.
What is the true statement?We know that a reaction has to do with the combination of the reactants in order to yield the products. We can see the thermochemical balanced reaction equation of the process as it was written in the question. A thermochemical equation is the type of equation that includes the energy that is absorbed or evolved in the reaction equation.
Now we can see that the reaction shows the combination of hydrogen and oxygen to give two molecules of water. This is a gas phase reaction and heat is given out according to the thermochemical reaction equation.
From the reaction equation;
If 2 moles of hydrogen evolves 484 kJ of energy
1.5 moles of oxygen evolves 1.5 moles * 484 kJ /2 moles
= 363 kJ
Learn more about thermochemical reaction:https://brainly.com/question/5102780
#SPJ1
What types of atoms typically form covalent bonds?
Answer: Between non-metals
Explanation:
Underline the correct answer 1.In which of the following substances are the particles arranged in a regular pattern? A Water B Salt solution C Ice D Water vapour
Answer:
A). Water
PLEASE GIVE BRAINLIEST THANK YOU!!!
Answer:
water
Explanation:
1. When mountain climbers hike up Mount Everest, they carry bottles of oxygen because the pressure decreases. At the top, the pressure can reach as low as 0.20 atm. If they bring 15 L of oxygen, stored at a pressure of 40 atm, what will be the volume of the gas when it is released at the top of the mountain? Assume that the temperature does not change as you climb the mountain.
Answer:
V2 = 0.075 L
Explanation:
P1= first pressure
P2= second pressure
V1= first volume
V2= second volume
P1V1 = P2V2=
(0.20 atmospheres)(15 L) = (40 atmospheres)V2=
V2 = (0.20 atmospheres)(15 L)/(40 atmospheres)=
V2 = 0.075 L
Based on what you know now, do you think the channel on Mars was formed by flowing water or flowing lava?
Ancient Martian riverbed channels were formed by molten lava rather than by liquid water.
Flowing lava can carve and carve paths like water-eroded riverbeds and canyons, and could explain at least one of the winding channels on Mars' surface. Many waterways on Mars were carved by water, but not all. Lava can also flow, creating features similar to stream channels. However, lava functions in many different ways.
Scientists have known since the Mariner 9 mission in 1972 that volcanic structures cover most of the surface of Mars. These features include vast lava flows, vast lava plains, and the largest known volcanoes in the solar system. Massive torrents of water carry rocks and rocks torn from upstream springs. These scratch and abrade the canal floor, creating long lines that floodwaters can wash away and expand.
Learn more about Flowing lava here:-https://brainly.com/question/28434097
#SPJ9
As a pathologist, Joachim is responsible for performing autopsies. What does this MOST likely mean for Joachim?
A.
He spends hours trying to match fingerprints to a database.
B.
He compares bullets to guns to see if he can find a match.
C.
He dissects human bodies to determine how someone died.
D.
He uses insects to learn when a person most likely died.
Conducting an autopsy means Jacob is basically dissecting human bodies to determine how someone died.
An autopsy, also known as a post-mortem examination, is a specialized surgical procedure used to determine the cause and manner of death. The cause of death is generally the medical reason explaining why a patient passed. The manner of death is usually the circumstances surrounding the death.
What we learn from autopsies allows clinicians to better understand the disease processes, accurately diagnose diseases, improve therapy, and also potentially aid other patients who are currently suffering from a similar disease. There are many reasons why families choose to pursue having an autopsy done. Consent for an autopsy includes diagnostic, education, quality improvement, and research.
It is mostly used by the law enforcements as well to know also catch the culprits.
To know more about Autopsy
https://brainly.com/question/14403044
#SPJ1
A galvanic (voltaic) cell consists of an inert platinum electrode in a solution containing 1.0 M titanium(III) ion and 1.0 M titanium(II) ion, and another inert platinum electrode in a solution containing 1.0 M iron(III) ion and 1.0 M iron(II) ion, connected by a salt bridge. Calculate the standard potential for this cell at 25°C . Standard reduction potentials can be found in the standard reduction potentials table.
∘cell=
The standard potential for the galvanic cell at 25°C is 1.98 V.
What is a galvanic cell?A galvanic cell or an electrochemical cell is a cell that converts the chemical energy of the reactions occurring within it to electrical energy.
The galvanic cell is able to convert chemical energy to electrical energy as a result of the redox reactions occurring within the cell.
The standard potential for the given galvanic cell at 25°C is calculated as follows
Standard reduction potentials:
Ti³⁺ + 3e⁻ ---> Ti; E° = − 1.21 V (anode)
Fe³⁺⁺+ e⁻--> Fe²⁺ ; E° = 0.77 volts (cathode)
Eºcell = 0.77 V - (-1.21 V)
Eºcell = 1.98 V
Learn more about the standard potential of a cell at: https://brainly.com/question/19036092
#SPJ1
I need help in finding my percentage error answer. What would be my answer?
The percentage error of the above question is -2.03%.
What is percentage error?The percentage error is defined as the approximation error which is present in data value is the discrepancy between an some approximation and exact value to it. This error can also be expressed as a relative error or an absolute error. An approximation error can occur because of the measurement error or computing machine precision.
Make sure in numerator the units off all the digit must be same.
Mathematically, we defined as
Percentage error = (change in value / original value) × 100
(-267.6 - (-273.15) )
= 0. 020
= 2. 020/ (-273.15) × 100
= -2. 03 %
Thus, we concluded that the percentage error of the above question is -2.03%.
learn more about percentage error:
https://brainly.com/question/6269728
#SPJ1
PLEASE HELP
Step 3: Apply the scaling factor to the
empirical formula.
The scale factor is 5 and the empirical
formula is CH2O. What is the molecular
formula?
The molecular formula is (CH2O)5 when the scale factor is 5 and the empirical formula is CH2O.
Considering the question given above, the following data were obtained:
Empirical formula is CH₂O
Molar mass of compound = 150 g/mol
Scaling factor (n) =?
Empirical formula × n = molar mass
[CH₂O]n = 150
[12 + (2×1) + 16]n = 150
[12 + 2 + 16]n = 150
30n = 150
Divide both sides by 30
n = 5
Therefore, the scaling factor is 5
A scale factor is a ratio between corresponding measurements of an object and a representation of that object.In chemistry, the empirical formula of a chemical compound is the simplest whole-number ratio of atoms present in a compound. .Learn more about empirical formula at:
https://brainly.com/question/14044066
#SPJ1
Answer:
The scale factor is 5. The formula is CH2O.
Multiply each by 5.
So:
C (there is only one)= 1×5
H (there are 2)= 2×5
O(there is only one)= 1×5
Equalling= C5H10O5
There are 4.9875 mol C, 7.9802 mol H,
and 2.00 mol O in the sample.
Divide each by the smallest number of
moles. What is the ratio for the C?
Do not round your answer
2.48925 C : ? H : ? O
The ratio of the carbon to other atoms would be 2.49375:3.9901:1.000 and the empirical formula of the compound would be [tex]C_2H_8O[/tex]
Empirical formulaThe compound contains C, H, and O according to the following information:
C = 4.9875 mol
H = 7.9802 mol
O = 2.00 mol
In order to obtain the empirical formula of the compound, divide the mol of each atom by the smallest mol. In this case, the smallest mol is 2.00
C = 4.9875/2.00
= 2.49375
H = 7.9802/2.00
= 3.9901
O = 2.00/2.00
= 1.0000
Thus, the ratio of carbon to the rest of the atoms present in the compound is 2.49375:3.9901:1.000
In order to find the empirical formula of the compound, the mole of each atom needs to be approximated to the nearest whole number.
C = 2
H = 8
O = 1
Thus, the empirical formula of the compound is [tex]C_2H_8O[/tex].
More on empirical formulas can be found here: https://brainly.com/question/14044066
#SPJ1
Evan is told by the police officer, “You have the right to remain silent.” What is MOST likely happening?
A.
Evan is being issued a subpoena.
B.
Evan is being served a search warrant.
C.
Evan is being read his Miranda rights.
D.
Evan is about to testify in a criminal case.
The words "You have the right to remain silent.” means Evan is being read his Miranda rights, option C.
What are Miranda rights?Miranda rights are warnings issued by law enforcements to individuals in custody to protect their rights as part of the criminal procedure rule. These rights were created in 1966 consequently by the Miranda vs Arizona supreme court case.
The Miranda warning contains the words "You have the right to remain silent. Anything you say or do may be used against you in the court of law. You have the right to an attorney.” When the police officers read this to Evan, it was his Miranda rights.
Learn more on rights here: https://brainly.com/question/1261546
#SPJ1
What is 2x+83-(456x56)^2
Answer: -207936x>112+2x+83
What is the correct net ionic equation, including all coefficients, charges, and phases, for the following set of reactants? Assume that the contribution of protons from H2SO4 is near 100 %
The net ionic equation is :
Ba²⁺ + 2OH⁻ + 2H⁺ + SO₄²⁻ ----> BaSO₄ + 2H₂O
The balanced molecular equation is given as:
Ba(OH)₂ + H₂SO₄ ----> BaSO₄ + 2H₂O
The net ionic equation is the equation in which we breaking up into ions and cut off the spectator ions that is the ion which is common in both side , we get :
complete ionic equation first :
Ba²⁺ + 2OH⁻ + 2H⁺ + SO₄²⁻ ----> BaSO₄ + 2H₂O
now. there are no spectator ion so net ionic equation is same :
Ba²⁺ + 2OH⁻ + 2H⁺ + SO₄²⁻ ----> BaSO₄ + 2H₂O
Thus, The net ionic equation is :
Ba²⁺ + 2OH⁻ + 2H⁺ + SO₄²⁻ ----> BaSO₄ + 2H₂O
To learn more about net ionic equation here
https://brainly.com/question/15466794
#SPJ9
A curry chicken soup recipe calls for you to combine all of the main ingredients, seasonings, in 5 cups (1175 g) of chicken broth (Cs = 3.60 J/gx°C) simmering at 90.0°C until the potatoes are tender.
Coconut milk (Cs = 3.98 J/gx°C), which is initially at 25.0 °C, is added and stirred until mixed.
How many grams of coconut milk was added if the final temperature of the soup was found to be 72.0 °C?
(Answer to a whole number and don't forget your units)
The amount of coconut milk added if the final temperature of the soup was found to be 72.0 °C is 430g
The amount of coconut milk added can be found using the equation:
m₁C₁ΔT₁ = m₂C₂ΔT₂
Where m is the mass, C is the specific heat, and ΔT is the change in temperature.
In this equation, m₁ is the mass of the coconut milk, C₁ is the specific heat of the coconut milk, ΔT₁ is the change in temperature of the coconut milk, m₂ is the mass of the soup, C₂ is the specific heat of the soup, and ΔT₂ is the change in temperature of the soup.
We are given the specific heat of the coconut milk and the soup, the change in temperature of the soup, and the final temperature of the soup. This allows us to solve for the mass of the coconut milk, which is m₁.
m₁ = m₂C₂ΔT₁/C₁ΔT₂
m₁ = (1175 g)(3.60 J/g°C)(72.0°C - 90.0°C)/(3.98 J/g°C)(72.0°C - 25.0°C)
m₁ = -427 g
This answer is impossible because the mass of a substance cannot be negative. By solving it in other means we get,
The amount of coconut milk added can be found using the equation
ΔQ = mCΔT
ΔQ is the heat transfer, m is the mass, C is the specific heat, and ΔT is the change in temperature.
We are given the specific heat of coconut milk (Cs = 3.98 J/g°C), the initial temperature of the coconut milk (25.0°C), the final temperature of the soup (72.0°C), and the heat transfer of the soup (ΔQ = 1176 * 3.6*47 = 81168 Joules).
Therefore, the equation becomes:
81168 = m(3.98)(47)
m = 81168 / (3.98 * 47)
m = 81168 / 189.06
m = 429.6 grams
The amount of coconut milk added was 429.6g which could be rounded off as 430g
To know more about heat, click below:
https://brainly.com/question/25603269
#SPJ1
Which of the following nuclear reactions represents natural decay?
Radiation is produced when unstable or radioactive atoms through the process of becoming stable. We refer to this process as radioactive decay over time. Two protons and two neutrons are lost from the nucleus as a result of alpha decay.
What is nuclear decay reaction ?An unstable nucleus releases radiation and changes into the nucleus of one or more additional elements during a nuclear decay process, also known as radioactive decay.
The ensuing offspring nuclei are less energetic and heavier than the parent nucleus that underwent decay, making them more stable.
For example, by producing an alpha particle, the unstable uranium-238 nucleus naturally decays into a thorium-234 nucleus. The most prevalent radioactive decay processes are decay, emission, decay, positron emission, and electron capture.
Thus, Radiation is produced when unstable or radioactive atoms through the process of becoming stable.
To learn more about nuclear decay reaction follow the link below;
https://brainly.com/question/2312116
#SPJ1
What is the name of the molecule below?
• A. 2-pentyne
O B. 2-pentene
O c. 2-pentane
• D.
pentane
Answer:
2-pentene
Explanation:
On the 2nd Carbon we see a C=C, carbon with double bonds have the suffix -ene.
Write the balanced NET ionic equation for the reaction when NH₄Cl and Cu(C₂H₃O₂)₂ are mixed in aqueous solution.
The net ionic equation of the reaction as it is shown have been given here by the equation; [tex]Cu^+(aq) + Cl^-(aq) ---- > CuCl(s)[/tex]
What is net ionic equation?The term net ionic equation has to do with the equation that shows the manner in which we are able to convey the information that concerns the ions that do not undergo a change in the reaction.
In this case, we have the reaction that occurs between ammonium chloride and copper II acetate which would produce a copper I chloride and an ammonium acetate product. The net ionic equation would now be;
[tex]Cu^+(aq) + Cl^-(aq) ---- > CuCl(s)[/tex]
Learn more about net ionic equation:https://brainly.com/question/15466794
#SPJ1
Reward is 30 points!!!! PLease help.
If 18.5 g of NaOH is added to 0.800 L of 1.00 M Zn(NO₃)₂, what mass in grams of Zn(OH)₂ will be formed in the following precipitation reaction? 2 NaOH(aq) + Zn(NO₃)₂(aq) → Zn(OH)₂ (s) + 2 NaNO₃ (aq)
The mass of the zinc II hydroxide produced is 22.77 g.
What is stoichiometry?It is common that we use the stoichiometry of a reaction to be able to obtain the parameters that have to do with the reaction. In his case, we already have the balanced reaction equation of this reaction and this is our basic stock in trade for the task that is ahead of us.
Now we have; 2 NaOH(aq) + Zn(NO₃)₂(aq) → Zn(OH)₂ (s) + 2 NaNO₃ (aq)
Number of moles of the sodium hydroxide = 18.5 g/40 g/mol = 0.46 moles
Number of moles of the zinc II nitrate solution = 1.00 M * 0.800 L = 0.8 moles
If 2 moles of the sodium hydroxide reacts with 1 mole of the zinc II nitrate
0.46 moles of the sodium hydroxide reacts with; 0.46 moles * 1 mole/ 2 moles
= 0.23 moles
Hence the sodium hydroxide is the limiting reactant.
Thus;
2 mole of sodium hydroxide produces 1 mole of zinc II hydroxide
0.46 moles of sodium hydroxide produces 0.46 moles * 1 mole/2 moles
= 0.23 moles
Mass of the zinc II hydroxide = 0.23 moles * 99 g/mol
= 22.77 g
Learn more about stoichiometry:https://brainly.com/question/9743981
#SPJ1
PLS HELP HIGH POINTS
Which term describes this reaction?
~KIK-TK
H3N+-C-C
addition
Ocondensation
x elimination
O substitution
H-N-C-C
H₂O
H₂N-C-C-IN-C-C
HHH
Answer:
Condensation
Explanation:
We can see that H2O is formed when the two molecules join together, which is a characteristic of Condensation polymerization
Which property of liquids explains why a glass of water can be filled over the brim without spilling?
Answer:
Surface tension due to cohesion
Explanation:
Water molecules are polar meaning they have dipoles. The hydrogen end is partially positive while the oxygen end is partially negative. This is because oxygen with high atomic mass attracting most of the molecule's electron cloud to its end.
Due to this phenomenon water molecules act like little magnets that attract each other. The attraction of the molecules forms hydrogen bonds with each other. This is called cohesion (attraction of similar molecules). Due to this, water is able to create a surface tension that acts like a ‘skin’ and can support some weight (including its own weight) without collapsing.
Read more on Brainly.com - https://brainly.com/question/13216792#readmore
Answer:
Cohesion of water
Explanation:
cohesion means sticking together so Before it overflows, the water forms a dome-like shape(rounded) above the rim of the glass. This dome-like shape forms due to the water molecules' cohesive properties, or their tendency to stick to one another.
what will the kids feet be webbed or have paws the mom has webbed feet the dad has paws the mom has capital f and lowercase f the dad has two lowercase f the picture is the punnett square
Answer:
2 of the children's feet will be webbed, and the other 2 will have paws.
Explanation:
The dominant genes of the Mother will override the recessive genes of the Father, since there isn't 2 of the recessive genes, except for on the other 2 children. If there was a dominant gene, it would have at least 1 capital letter, and that dominant gene would prevent the recessive (lowercase) letter from showing up.