Answer:
electrons are transferred from the lithium atom to the chlorine atom
Answer:
D
Explanation:
I just took the test :)
A train travels with a speed of 115km/hr. How much time does it take to cover a distance of 470km.
It would take approximately 4 hours for the train to cover a distance of 470km.
4 hours 5 minutes 13.04 seconds
Gasoline is an example of an accelerant. True False
Answer:
true
Explanation:
Answer:
I believe its true
Explanation:
Gasoline is the most common fire accelerant used but it could also be present at a scene as an ignitable liquid due to gasoline being a common fuel. Although ignitable liquids are the most common fire accelerants it is possible to have other chemicals being used as a fire accelerant.
help plz The sum of all chemical reactions that take place within an organism is known as ______________. *
Answer:
Metabolism
Explanation:
metabolism is the sum of all chemical reactions that take place within an organism
Answer:
Metabolism
Explanation:
Many things can alter your heart rate including: exercise, diet, nutrition, sugar, and caffeine
True or false
Answer:
true
Explanation:
Need help can someone tell what each circuit is
Answer:
In geometry, parallel lines are lines in a plane which do not meet; that is, two straight lines in a plane that do not intersect at any point are said to be parallel. Colloquially, curves that do not touch each other or intersect and keep a fixed minimum distance are said to be parallel.
In a series circuit, the current that flows through each of the components is the same, and the voltage across the circuit is the sum of the individual voltage drops across each component. ... In a series circuit, every device must function for the circuit to be complete.
In a series circuit, all components are connected end-to-end, forming a single path for current flow. In a parallel circuit, all components are connected across each other, forming exactly two sets of electrically common points.
Explanation:
I hope these helps^,^ ^_^
If the position of a particle on the x-axis at time t is −5t2, then the average velocity of the particle for 0 ≤ t ≤ 3 is
Answer:
v = 15 m / s
Explanation:
In this exercise we are given the position function
x = 5 t²
and we are asked for the average velocity in an interval between t = 0 and t= 3 s, which is defined by the displacement between the time interval
[tex]v= \frac{v_{f} - v_{o} }{t_{f} - t_{o} }[/tex]
let's look for the displacements
t = 0 x₀ = 0 m
t = 3 [tex]x_{f}[/tex] = 5 3 2
x_{f} = 45 m
we substitute
[tex]v = \frac{45 -0}{3 - 0}[/tex]
v = 15 m / s
The sun's energy begins as what form of energy?
Answer:
nuclear energy.............
The sun's energy begins in the nuclear form of energy. Nuclear energy is the origin of the sun's energy.
Nuclear energy originates from the sun's energy. Nuclear fusion processes happen at the sun's core, transforming protons from hydrogen into helium and releasing a tremendous amount of energy in the process. Nuclear fusion is the term for this action.
Helium nuclei are created from the collision and fusion of hydrogen nuclei in the sun's core, which experiences extremely high temperatures and pressures. An enormous quantity of energy is released during the nuclear fusion process in the form of electromagnetic radiation, especially visible light photons and other types of electromagnetic radiation.
The intense heat and brightness of the sun are maintained by the energy generated by nuclear fusion in its core, giving it a potent source of light and heat that sustains life on Earth and powers a variety of atmospheric and climatic processes.
Hence, the sun's energy begins in the nuclear form of energy. Nuclear energy originates the sun's energy.
To learn more about energy, here:
https://brainly.com/question/1932868
#SPJ6
In May 1990 the French TGV train traveled the distance from Paris to Lille, France (127 miles) in 0.819 hours. What was the speed of the TGV in m/s
Answer:
v=69.32 m/s
Explanation:
you have to transfer the distance from mile to meters (from miles to meters multiply by 1609)
so d=204387 m
you have to transfer the time from hour to second (from hour to second multiply by 3600)
so t=2948.4 s
the rule says v=d/t=204387/2948.4= 69.32 m/s
The TGV train has a speed of 69.306 meters per second.
Let suppose that TGV train is travelling at uniform velocity, then we can be calculated its speed by means of the following kinematic equation:
[tex]v = \frac{x}{t}[/tex] (1)
Where:
[tex]v[/tex] - Speed, in meters per second.[tex]x[/tex] - Distance travelled by the train, in meters.[tex]t[/tex] - Time, in seconds.Now we proceed to convert both distance and time in terms of fundamental units:
Distance:
[tex]x = 127\,mi \times 1609\,\frac{m}{mi}[/tex]
[tex]x = 204343\,m[/tex]
Time:
[tex]t = 0.819\,h \times 3600\,\frac{s}{h}[/tex]
[tex]t = 2948.4\,s[/tex]
If we know that [tex]x = 204343\,m[/tex] and [tex]t = 2948.4\,s[/tex], then the speed of the TGV train is:
[tex]v = \frac{204343\,m}{2948.4\,s}[/tex]
[tex]v = 69.306\,\frac{m}{s}[/tex]
The TGV train has a speed of 69.306 meters per second.
We kindly invite you to check this question about kinematics: https://brainly.com/question/24468164
The Sears Tower in Chicago is approximately 444 m tall Suppose a book
dropped from the top of the building what would be the book's velocity
point 222 m above the ground Neglectair resistance.
O 66.0 m/s (downwards)
2.00 m/s upwards)
22.0 m/s (downwands)
/s (
) 66.0 m/
swards,
Answer:
A. 66.0 m/s downwards
Explanation:
The Tower has a height of 444m
The book is dropped ,finding the velocity of the book 222m above the ground, means the book will be on air for a height of 222 m .
Apply the formula for free fall in a horizontal projection as;
h= u²×sin²∅ /2g where
h= maximum height =222m
g= acceleration due to gravity =9.81 m/s²
∅ = projectile angle = 0
u = velocity of the book
Applying the formula as ;
h= u²×sin²∅ /2g
222 = u²/2*9.81
222*19.62 = u²
4355.64 = u²
√4355.64 = u
65.99 m/s = u
66 m/s downwards
Which screw would create a strong hold?
Which is heavier: 30 kilogram or 300 milligrams?
Answer:
30 killograms is 85.9803
and 300 milligrams is 0.000661387 pounds
Explanation:
Using Velocity vs Time Graphs to Find Acceleration
A graph titled velocity versus time has horizontal axis time (seconds) and vertical axis velocity (meters per second). A line has 4 straight segments. Line segment A runs from 0 seconds 0 meters per second to 1 seconds 15 meters per second. Then segment B runs to 2 seconds 20 meters per second. Then segment C runs to 4 seconds 20 meters per second. Then segment D runs to 5 seconds 0 meters per second.
The acceleration of segment D is m/s2.
Rank segments A, B, and C from least acceleration to greatest acceleration.
Least:
Greatest:
The acceleration at segment D is -20m/s²
The rank of the acceleration from the least to the greatest is -20m/s² < 0m/s² < 5m/s² < 10m/s² (D<C<B<A)
Acceleration is the change in velocity with respect to time.
a = v-u/t
Acceleration at segment A:
Aa = 15-0/1-0
Aa = 15m/s²
Acceleration at segment B:
Ab = 20-15/2-1
Ab = 5m/s²
Acceleration at segment C:
Aa = 0-0/4-2
Aa = 0m/s²
Acceleration at segment D:
Ac = 0-20/5-4
Ac = -20m/s²
Hence the acceleration at segment D is -20m/s²
The rank of the acceleration from the least to the greatest is -20m/s² < 0m/s² < 5m/s² < 10m/s² (D<C<B<A)
Learn more here: https://brainly.com/question/18398656
A golf ball is sitting on a tee. The ball is struck with a golf club and flies
through the air. How does the force on the club compare with the force on the
ball when momentum is transferred between the club and ball?
Answer:
c i kn now it is
Explanation:
28. A student notices that when a weight is hung on a spring, the spring stretches. She decides to conduct an experiment to determine the relationship between the amount of weight
placed on a spring and the distance the spring stretches. She has five different weights: 25 9,50 9.75 9. 100 9, and 125 g. She selects a weight, hangs it on the spring, and
measures how far the spring stretches
What is the independent variable in this experiment?
length of unst etched spring
distance the spring stretches
weight hung from the spring
O temperature of the spring
Answer:
C). weight hung from the spring
Explanation:
An Independent variable is characterized as the variable that is controlled or manipulated by the experimenter in order to observe its change on the dependent variable.
In the given experiment, 'weight hung from the spring' is the independent variable as it is manipulated by the researcher in order to witness its impact on the dependent variable(how the spring stretches). It is the cause that causes an effect on the dependent variable. Any change in the former directly affects the latter. Thus, option C is the correct answer.
for an object in free fall, calculate the rate of change of the velocity from the first to the 100th second (metric units).
Answer:
The rate of change of velocity is 9.81 m/[tex]s^2[/tex].
Explanation:
By using the equation of motion, the velocity of any object in free fall at any instant, [tex]v=u+gt[/tex]
Where u (constant) is the initial velocity,
[tex]g=9.81 m/s^2[/tex] is the acceleration due to gravity,
v= velocity at time t.
To get the rate of change of velocity, differentiating the velocity, v, with respect to time, as
[tex]\frac {dv}{dt}=\frac{d}{dt}(u+gt) \\\\=\frac{d}{dt}u +\frac{d}{dt}(gt) \\\\=0+g\\\\=g[/tex]
[tex]\Rightarrow \frac{dv}{dt}=9.81 m/s^2[/tex]
Hence, the rate of change of velocity is 9.81 m/[tex]s^2[/tex].
Why do you think it is colder during the winter than the summer?
Answer:
As the earth travels around the sun during the year it maintains this tilt. Because of this tilt, in the summer we (north of the equator) are slanted more directly towards the sun so it's hotter. In the winter, we're slanted away so the sun's rays are less direct, making it colder.
A ball of radius R and mass m is magically put inside a thin shell of the same mass and radius 2R. The system is at rest on a horizontal frictionless surface initially. When the ball is, again magically, released inside the shell, it sloshes around in the shell and eventually stops at the bottom of the shell. How far does the shell move from its initial contact point with the surface
Answer:
[tex]x =\frac{-R}{2}[/tex]
Explanation:
From the question we are told that mass
Thin layer radius [tex]= 2R[/tex]
Generally the expression for ths solution is given as
Xcm =(m*0 =m(-2R))/2m =-mR/(2m)=-R/2
the center of mass will not move at initial state
Considering the center of mass of both bodies
[tex]xcm=\frac{m*x+m*x)}{2m} =x[/tex]
[tex]x =\frac{-R}{2}[/tex]
Therefore the enclosing layer moves [tex]x =\frac{-R}{2}[/tex]
The shell move from its initial contact point with the surface is,
[tex]x =\dfrac{-R}{2}[/tex]
Given-
Radius of the ball is [tex]R[/tex].
the mass of the ball is [tex]m[/tex].
The mass of the thin shell is [tex]m[/tex].
The radius of the thin shell is [tex]2 R[/tex].
For the two bodies with mass [tex]m[/tex], the center of mass can be given as,
[tex]x_{cm}=\dfrac{m_{1} x_{1}+m_{2} x_{2} }{m_{1} +m_{2}}[/tex]
In the given question, the mass of both the bodies are equal and the given distance of center of mass for both bodies are also equal. Therefore,
[tex]x_{cm}=\dfrac{m x_+mx }{m +m}[/tex]
[tex]x_{cm}=\dfrac{2mx }{2m}[/tex]
[tex]x_{cm} =x[/tex]
Distance for center of mass can also be given as,
[tex]x_{cm} =m\times o[/tex]
[tex]x_{cm} =m\times \dfrac{-R}{2m}[/tex]
[tex]x_{cm} =\dfrac{-R}{2}[/tex]
Comparing both the values of the distance of center of mass we get,
[tex]x =\dfrac{-R}{2}[/tex]
Hence, The shell move from its initial contact point with the surface is,
[tex]x =\dfrac{-R}{2}[/tex]
For more about the center of mass follow the link below,
https://brainly.com/question/8662931
The temperature of rock located 1,000 kilometers below the Earth's surface is about a. 200 C b.2,100 C c.2,800 C d.3,200 C
The temperature of the rock located at 1,000 km below the earth' surface has been 3200 degree Celsius. Thus, option D is correct.
The temperature at the earth's surface has been found to be nearly 0 degree Celsius. According to the geology of the earth, the temperature has been increased to 1500 degree Celsius by digging 100 km below the earth surface.
Thus, the temperature at 100 km from earth surface has been 1500 degree Celsius.
On moving down from 100 km, there has been a rise in temperature, and at the mouth of the mantle at 1000 km, the temperature has been approximately 3500 degree Celsius.
Thus the temperature that has been near about 3500 degree Celsius is 3200 degree Celsius. Thus, the temperature of the rock at 1000 km below the earth surface has been 3200 degree Celsius. Thus, option D is correct.
For more information about the temperature of earth, refer to the link:
https://brainly.com/question/893891
define light?it's types
Answer:
Light or visible light is electromagnetic radiation within the portion of the electromagnetic spectrum that can be perceived by the human eye. Visible light is usually defined as having wavelengths in the range of 400–700 nm, or 4.00 × 10⁻⁷ to 7.00 × 10⁻⁷ m, between the infrared and the ultraviolet.
Explanation:
This is one type of light.
WRITE A PARAGRAPH ABOUT PRESSURE
Answer:
pressure is a horrible thing to go through, it can lead to many bad side effects, like burn out and it can also lead to high blood pressure, head aches, heart problems, depression, anxiety, and many more damaging effects. Pressure can destroy someones mental health if not dealed worth properly
I hope this is okay! I'm not sure what pressure you meant
Question 8 of 15
Which of the following distinguishes electromagnetic waves from mechanical
waves?
A. They carry energy.
B. They have frequencies.
C. They have wavelengths.
D. They don't require a medium to travel through.
Answer:
D. They don't require a medium to travel through.
Explanation:
Electromagnetic waves and mechanical waves are both types of waves. Electromagnetic waves are waves that arise from the combination of electric and magnetic fields while mechanical waves are waves that arise as a result of transfer of energy via matter.
One major difference between these two types of waves is that electromagnetic waves such as light waves, radiowaves etc. do not need a medium to travel i.e. they can travel through a vacuum, while on the other hand, mechanical waves such as sound waves need a medium to travel.
Answer:
They don't require a medium to travel through
Explanation: hope this helps
Two soccer players run toward each other. One player has a mass of 85 kg
and runs west with a speed of 8 m/s, while the other has a mass of 105 kg
and runs east with a speed of 7 m/s. What is the total momentum of the
system made up of the two players?
Answer:
Total momentum, p = 55 kg-m/s
It is given that,
Mass of player 1, m₁ = 85 kg
Mass of player 2, m₂ = 105 kg
Speed of player 1, v₁ = -8 m/s (west)
Speed of player 2, v₂ = 7 m/s (east)
Momentum is equal to the product of mass and velocity. For this system, momentum is given by :
p=m_1v_1+m_2v_2p=m
1
v
1
+m
2
v
2
p=85\ kg\times (-8\ m/s)+105\ kg\times 7\ m/sp=85 kg×(−8 m/s)+105 kg×7 m/s
p = 55 kg-m/s
The total momentum of the system made up of the two players is 55 kg-m/s.
Answer:
p = 55 kg * m/s east
Explanation:
The answer above explains it neatly, but leaves the direction out of the answer. The player heading east has more momentum, so the net momentum of the system is east.
A 200-gram baseball traveling at 48 m/s is hit by a bat and rebounds in the opposite direction at 52 m/s. Find the average force of the bat on the ball if the time of contact is 2.0x10-3 s.
Answer:
400N
Explanation:
Given the following parameters
Mass m = 200g = 0.2kg
initial velocity u = 48m/s
Final velocity v = 52m/s
Time t = 2.0x10-3 s.
Impulse is expressed as I = Ft = m(v-u)
Ft = m(v-u)
F = m(v-u)/t
Substitute the given values into the formula
F = 0.2(52-48)/0.002
F = 0.2(4)/0.002
F = 0.8/0.002
F = 400N
Hence the average force of the bat on the ball is 400N
What is the mass of an object that accelerates at 5 m/s2 when pushed with 100 N?
Answer:
the answer is 20g
Explanation:
Data:
acceleration:5m/s2
force:100N
mass:?
solution:
force: mass*acceleration
mass: force divided by acceleration
mass:100/5
mass:20g
or another way of solving it is
force: mass*acceleration
100:mass*5
100/5 : mass
20g:mass
In projectile mtion, what is the y-component of the initial velocity? if V= Vi = 100 m/s and the angle with horizontal axis Θ = 30 degrees
Answer:
hence the y - component of the velocity is 50m/s
NEED AWNSER NOW! WILL MARK BRAINLY! Which term is defined as the ratio of the speed of light in a vacuum to the speed of light in the material it is passing through?
index of reflection
index of refraction
angle of reflection
angle of incidence
Answer:
Index of refraction.
Answer:
index of refraction
Explanation:
I just took the k12 quiz.
An object has a force of 29.43 N acting on it. Its acceleration is 3.5 m/s2. What is the mass of this object?
Answer:
The mass of the object is 8.41 Kg.
Explanation:
Mechanical Force
The second Newton's law states that the net force exerted by an external agent on an object of mass m is:
F = m.a
Where a is the acceleration of the object. The SI unit for the force is the Newton: [tex]1\ Nw = 1~Kg.m/s^2[/tex]
We are given the net force of F=29.43 N acting on an object and producing an acceleration of a=3.5~m/s^2.
To calculate the mass of the object, we solve the above equation for m:
[tex]\displaystyle m=\frac{F}{a}[/tex]
[tex]\displaystyle m=\frac{29.43}{3.5}[/tex]
Calculating:
m = 8.41 Kg
The mass of the object is 8.41 Kg.
If you could change one property of a substance ( solid, liquid, and gas) you have to use in your daily life, what would it be and why?
Please hurry
I will give you BRAINLIEST!!!!!!
And pleaseee write 5 sentences why??
Answer
Soap into a liquid
Explanation:
Determine the energy lost, due to friction, as an 8000 N car that skids to a stop, if its initial velocity was 12 m/s.
Answer:
58,800Joules
Explanation:
The energy lost is equal to the workdone by the car as it skids.
Workdone = Force * Distance
Given
Force = 8000N
Get the distance using the equation of motion
v² = u² - 2gS
0² = 12² - 2(9.8)S
-12² = - 2(9.8)S
-144 = -19.6S
S = 144/19.6
S = 7.35m
Calculate the required energy
Workdone = 8000 * 7.35
Workdone = 58,800Joules
Hence the energy lost due to friction is 58,800Joules
15. Use the chemical equation below to determine how many moles of ammonia
(NH) will be produced from 4 moles of nitrogen gas (N). Assume that there is enough H, for all of the N, to be converted to NH.
N2 + 3H2 + 2NH
8 moles
2 moles
3 moles
4 moles
Answer:
I'm not really sure but I think it is
four