A bullet from a policeman's handgun travels at 200 meters per second and has a mass of 0.02 kg.
What is the bullet's kinetic energy?
Answer:
K.E = 400
Explanation:
Given the following data;
Mass = 0.02kg
Velocity = 200m/s
To find the kinetic energy;
Kinetic energy can be defined as an energy possessed by an object or body due to its motion.
Mathematically, kinetic energy is given by the formula;
[tex] K.E = \frac{1}{2}MV^{2}[/tex]
Where;
K.E represents kinetic energy measured in Joules.
M represents mass measured in kilograms.
V represents velocity measured in metres per seconds square.
Substituting into the formula, we have;
[tex] K.E = \frac{1}{2}*0.02*200^{2}[/tex]
[tex] K.E = \frac{1}{2}*0.02*40000 [/tex]
[tex] K.E = 0.02*20000 [/tex]
K.E = 400
The bulk of geologic evidence indicates that the Earth's crust has been formed by unique, rapid ————- processes
Catastrophic
Uniformitarian
Please hurry!
A string is being driven by a motor with a frequency of 10 Hz. If the speed of the waves travelling down the string is equal to 24 m/s, what is the wavelength?
Answer:
λ = 2.4 m
Explanation:
The speed of a wave is defined as the product of the frequency and the wavelength of that wave:
[tex]v = f\lambda[/tex]
where,
v = speed of wave = 24 m/s
f = frequency of wave = 10 Hz
λ = wavelength of the wave = ?
Therefore,
[tex]24\ m/s = (10\ Hz)\lambda\\\\\lambda = \frac{24\ m/s}{10\ Hz}[/tex]
λ = 2.4 m
A 2400W electric toaster is connected to a standard 120 V wall outlet. A family
measured their monthly toaster usage to be 6.5 hrs.
6
1) How much electrical energy (in kilowatt hours - kWh) did the toaster dissipate
during the measured month? (round to 1 decimal place & do not include units)
2) If the local power company charges $0.13/kWh, then calculate (in $) the monthly
total cost of this toaster. (round to 2 decimals & do not include units)
Answer:
1) 15.6
2) 2.03
Explanation:
The power output of the electric toaster, P = 2,400 W
The voltage rating of the power outlet, V = 120 V
The number of hours the toaster is used during a month = 6.5 hours
1) Electrical energy, E = Electrical power, P × Time, t
The electrical energy dissipated by the toaster, 'E', is given as follows;
E = 2,400 W × 6.5 hrs = 15,600 Wh = 15.6 kWh
The electrical energy dissipated by the toaster, during the measured month in kWh, E = 15.6
2) Let 'C' represent the monthly cost of toaster and let 'B' represent the amount charged by the local power company, we have;
The charges for (electrical) power by the local power company, B = $0.13/kWh
The monthly cost of the toaster, C = E × B
∴ C = 15.6 kWh × $0.13/kWh = $2.028
By rounding off to 2 decimals, the monthly cost of the toaster (in $), C ≈ 2.03.
The break light on a car is connected to a 12V battery. If the resulting current is 0.4A what is the resistance of the brake light?
NO LINKS
Answer:
30
Explanation:
well I got it right but I'm not sure if it's the same thing
What is the overall moment?
two difference between hydraulic brake and hydraulic lift
Answer:
hydraulic lift pump moves the lift piston out in a series of movements. and a hydraulic brake moves it out in one short break.
Which of the following statements is best supported by the data in the table?
Choose 1 answer:
Choose 1 answer:
(Choice A)
A
The genes for having large fruit became more common in the S. lycopersicum population over time due to selection of the large fruit trait by humans.
(Choice B)
B
During the process of tomato domestication, humans likely crossed plants with a higher-than-average number of fruits per inflorescence to create each new generation.
(Choice C)
C
Having many fruits per cluster is a disadvantageous trait for S. pimpinellifolium in the wild, likely because of the energy costs associated with fruit development.
(Choice D)
D
The genes for having large fruit became more common in the S. pimpinellifolium population over time, likely because the large fruit trait increased the probability of seed dispersal.
Answer: Choice A)
Explanation:
Una masa de 4kg esta abajo la acción de una fuerza resultante de (a)4 N (b) 8N y (c) 12 N ¿Cuáles son las aceleraciones resultantes?
Explanation:
A 4kg mass is under the action of a resultant force of (a) 4 N (b) 8N and (c) 12 N What are the resulting accelerations?
Given that,
Mass, m = 4 kg
(a) Force = 4 N
We know that,
Force, F = ma
Where
a is accelertaion,
a= F/m
a = 4/4 = 1 m/s²
(b) F = 8 N
a= F/m
a = 8/4 = 2 m/s²
(c) F = 12 N
a = 12/4 = 3 m/s²
Hence, this is the required solution.
If you're the white mouse, what will you do in order for you to survive
Answer:
If I was the white mouse, I would either find somewhere to hide that matches my fur color to camoflouge with or dig into the dirt so less visible.
To find white colour habitat.
What will I do for my survival?If I was the white mouse, I would find white colour place for living because in that white colour the predators can't see me and i will be safe from them so we can conclude that finding white colour habitat is the best choice to safe myself.
Learn more about survive here: https://brainly.com/question/24323334
the zinc plate is coated with mercury
A single output device has failed while the remainder of the PLC system is functioning normally The indicator light on the output module indicates that a signal is sent to the output point where the device is connected. You would now:
a) trace the circuit back through the logic to locate the inputs.
b) use a programming terminal to call up the rung that controls the output to see if the output coil is on.
c) check the point where the output device's field wiring is connected to the output rack.
d) check the input modules for short-circuit conditions.
Answer:
check the point where the output device's field wiring is connected to the output rack. ( C )
Explanation:
Given that an indicator light on the output module is indicating that a signal has been sent to the output point where the failed single output device is connected , the best line of action to properly indicate the output device that has filed in the PLC system, is to check the point where the output device's field wiring is connected to the output rack in the PLC system.
A PLC system is a computer control system ( especially Industrial ) that helps in the monitoring the states of input and output devices in an industry.
A pulse with a height of +0.5 meter encounters a second pulse with a height of +2.3 meters. A. The two pulses interfere: B. The resulting height of the medium when the pulses interfere will be: ____m
CAN SOMEONE IN THE COMMETS ON EDG HELP ME WITH THIS IM NOT DOING THIS 4 POINTS I ACTULLY NEED HELP AND STRUGGLING U GUYS CAN CAN PUT A 1.0 STAR I REALLY DONT CARE BUT CAN SOMEONE HELP PLZ
what are the commons in all the dry cells ?
Answer:
A common dry-cell battery is the zinc-carbon battery, which uses a cell that is sometimes called the Leclanché cell. The cell is made up of an outer zinc container, which acts as the anode. The cathode is a central carbon rod, surrounded by a mixture of carbon and manganese(IV) dioxide (MnO2).
The truck travels for 1.5 hours as it makes the 90 mile trip from the warehouse to the store. What was the average speed in miles per hour of the truck while driving to deliver the product to the waiting customers?
Answer: 60 mph
Explanation:
Given
Truck takes [tex]1.5\ hr[/tex] to make [tex]90\ mile[/tex] trip
The average speed is the ratio of total distance traveled to the total time taken.
[tex]v_{avg}=\dfrac{\text{Distance}}{\text{time}}\\\\v_{avg}=\dfrac{90}{1.5}\\v_{avg}=60\ mph[/tex]
Which of these waves CANNOT travel through the vacuum of space?
A) microwaves
B) radio waves
C) light waves
D) sound waves
How dose the speed of the sound differ in water, iron, and Helium?
Answer:
air water iron helium
v(m/s) 280 2200 17780 39682
Explanation:
The speed of a wave depends on the physical properties of the medium where it travels, in the case of a longitudinal wave such as sound, it depends on the resistance to deformation (volume modulus and the density of the medium
v = [tex]\sqrt{ \frac{B}{ \rho } }[/tex]
in the mentioned materials they are constant
air water iron helium
B 1 10⁵ 2.2 10⁹ 140 10⁹ 0.05 10⁹
ρ 1.28 997 7874 1.26
v(m/s) 280 2200 17780 39682
Why does the golf ball sink in
water, while the beach ball
floats?
A- The beach ball weighs less than
the golf ball
B- The golf ball has a higher density
than the beach ball
C- The beach ball has a higher
density than the golf ball
D- The golf ball has more mass than
the beach ball
When you look at yourself in the mirror, what is the approximate angle of incidence of the light rays?
0 degrees
90 degrees
60 degrees
45 degrees
a body falls freely from rest.calculate it's acceleration
Answer:
10 m/s²
Explanation:
Since the body is falling freely from the rest, it will be having an acceleration equal to the acceleration due to gravity.
∴ Acceleration = g = 9.8 m/s². ≈ 10 m/s².
Answer:
10 m/s^2 I hope it helps u a lot
The illustration in figure below shows a uniform metre rule weighing 30 N pivoted on a wedge placed under the 40 cm mark and carrying a weight of 70 N hanging 2 from the 10 cm mark. The ruler is balanced horizontally by a weight W hanging from the 100 cm mark. Calculate the value of the weight W.
Answer:
W = 30 N
Explanation:
Applying the summation of torques about the wedge for equilibrium, taking the clockwise direction as negative. Since the ruler is balanced horizontally about the wedge. Therefore, the summation of all torques acting about the wedge must be equal to zero.
[tex](70\ N)(40\ cm - 10\ cm)-(30\ N)(50\ cm-40\ cm)-(W)(100\ cm - 40\ cm) = 0\\W(60\ cm) = (70\ N)(30\ cm)-(30\ N)(10\ cm)\\\\W = \frac{1800\ N.cm}{60\ cm}[/tex]
W = 30 N
describe two effects of weathering on a cliff
Answer:
In coastal areas, strong winds and powerful waves break off soft or grainy rocks from hardier rocks. Too much weathering occurs, it might break off parts of the cliff and be dangerous to humans, or animals.
Rain has acid in it which could eat up the cliff.
Explanation:
. Nuclear fusion reaction is more reliable and sustainable source of energy than nuclear fission chain reaction. Justify this statement with plausible arguments
Answer:
please give me brainlist and follow
Explanation:
Nuclear fusion can be more reliable than nuclear fission in energy generation due to the following reasons: There are no radioactive waste products obtained as a result of nuclear fusion, unlike nuclear fission. This is because the elements involved in Nuclear fusion are relatively radioactively stable elements.
A wave has a wavelength of 4 m and a frequency of 85 Hz. What is the speed of this wave?
The speed of wave with a wavelength of 4 m and a frequency of 85 Hz is 340m/s
The speed of a wave is the product of the frequency of the wave and its wavelength. Mathematically, it is expressed as:
[tex]v = f \lambda[/tex] where:
f is the frequency
[tex]\lambda[/tex] is the wavelength
Given the following:
f =85Hz
[tex]\lambda[/tex] = 4 m
Substitute the given parameter into the formula:
v = 85 × 4
v = 340m/s
Hence the speed of wave with a wavelength of 4 m and a frequency of 85 Hz is 340m/s
Learn more here: https://brainly.com/question/15721131
Light passes with an angle of incidence of 29.0 degrees from air (n = 1.00) into water
(n = 1.33). What is the angle of refraction?
how do i do the equation and whats the answer?
Explanation:
Light passes from air into water at an angle of incidence of 42.3∘.42.3∘. Determine the angle of refraction in the water.
Use Newton's second law of motion and a free-body diagram to...
1. ...calculate the normal force acting upon a 50-kg passenger who accelerates upward at a rate of 3.0 m/s/s.
2. ...calculate the normal force acting upon a 50-kg passenger who accelerates downward at a rate of 3.0 m/s/s.
Please don't put any links or I will report you.
Whaf can be the most dangerous part of a hurricane?
Answer:
The inside of a hurricane
Explanation:
You will die
You push down on a 3 N box for 5 minutes. How much work was done?
Answer:
none. 0. for work to be done the object has to have displacement, and even though you were exerting force, the box did not move and s work is o it could also be 50 but I'm sure it is 0
Explanation:
please help me with this
Answer:
Explanation:
Use the one-dimensional equation for displacement:
Δx = v₀t + [tex]\frac{1}{2}at^2[/tex] where Δx is the displacement, v₀ is the initial velocity (which is 0 since someone had to be holding the penny still before it was dropped), t is the time it takes to travel a certain distance (which is given as 4 seconds), and a is the acceleration due to gravity which is -9.8 m/s/s. Filling in:
Δx = [tex](0\frac{m}{s})(4s)+\frac{1}{2}(-9.8\frac{m}{s^2})(4s)^2[/tex] I'm going to expand this first so you can see how the units work out. First of all, anything times 0 is 0, so what is right in front of the plus sign goes to 0 and I'm going to leave it out. How this looks expanded without doing any of the actual math yet is:
Δx = [tex]\frac{1}{2}(-9.8\frac{m}{s^2})(4^2s^2)[/tex] which makes it apparent that the seconds-squared cancel each other out, leaving us with the meters only. NOW doing the math and rounding to 2 sigfig's even though there's only 1 in the number 4:
Δx = 78 m(the negative would only be used if the question we were answering was how far the penny had to fall, which would then use the negative sign to indicate that the penny is falling to a point that is below th point from which it was released. Since height is a distance measurement, it will never be negative. Keep in mind, asking how far the penny fell is not the same thing in physics as asking how tall the building was that the penny fell from.)
Which statement describes the image?
This is an image of an elliptical galaxy.
This is an image of an irregular galaxy.
This is an image of a normal spiral galaxy.
This is an image of a barred spiral galaxy.
Answer:
Its a barred spiral galaxy
Explanation:
Answer:
It is d
Explanation: