Answer:
What is the average acceleration of the man from the time his feet first touch the patio to the time he is brought fully to rest?
168.97m/s/s
With what force does this jump jar his bone structure?
14301.6N
Explanation:
What is the average acceleration of the man from the time his feet first touch the patio to the time he is brought fully to rest?
(Note that to solve this question you need to know and use the third equation of motion, v²=u²+2as, where v is final velocity, u is initial velocity, a is acceleration, and s is displacement.)
First the man drops 0.5m to the patio, and then it takes 2.9cm to fully stop. Let's look at the first half of this motion, from when he drops to when he first strikes the patio, but before he fully stops:
He drops to the patio, he doesn't jump with any momentum, so we can deduce his initial velocity (u) is 0m/s. The acceleration is due to gravity, so we take 'a' to be 9.8m/s/s, and the window is 0.5m above ground so s is 0.5. Subbing these in we get:
v²=u²+2as
v²=0²+2(9.8)(0.5)=9.8
v=3.13m/s, so the man strikes the patio at 3.13m/s
Now let's look at the part from when he first strikes the patio to when he fully comes to rest. He strikes the patio at 3.13m/s as we just figured out, so his initial velocity for this part is 3.13. We're told it takes 2.9cm to stop fully, so now s is 0.029. And if he's coming to a full rest, his final velocity will be 0. Subbing these in we get:
v²=u²+2as
0²=3.13²+2a(0.029)
0=9.8+0.058a
a=-9.8/0.085= -168.97m/s/s (value is neg because he comes to rest)
So the average acceleration is 168.97m/s/s
With what force does this jump jar his bone structure?
For this question we need to use Newton’s second law, F = ma + mg, where F is force, m is mass, a is acceleration and g is gravity:
F = ma + mg
F = m(a+g)
F = 80(168.97+9.8)=80(178.77)=14301.6
So the force exerted is 14301.6N
A concept sports car can go from rest to 40.0 m/s in 2.88 s. The same car can come to a complete stop from 40.0 m/s in 3.14 s. The magnitude of the starting acceleration to the stopping acceleration of the car is closest to:
1.09,0.937,0.878,1.15
Amy is trying to throw a ball over a fence. She throws the ball at an initial speed of 8.0 m/s at an angle of 40° above the horizontal. The ball leaves her hand 1.0 m above the ground and the fence is 2.0 m high. The ball just clears the fence while still traveling upwards and experiences no significant air resistance. How far is Amy from the fence?
0.73m,2.7m,7.5m,1.6m,3.8m
The magnitude of the starting acceleration to the stopping acceleration of the sports car is closest to 0.937. Amy is approximately 2.7 meters away from the fence.
To find the magnitude of the starting acceleration to the stopping acceleration of the sports car, we can use the equations of motion. The initial velocity (u) is 0 m/s, the final velocity (v) is 40.0 m/s, and the time taken (t) is 2.88 s. Using the equation v = u + at, we can rearrange it to solve for acceleration (a). Substituting the given values, we find that the starting acceleration is approximately 13.89 m/s^2. Similarly, for the stopping acceleration, we use the same equation with v = 0 m/s and t = 3.14 s, finding that the stopping acceleration is approximately -12.74 m/s^2. Taking the ratio of the magnitudes of these accelerations, we get 0.937.
For Amy throwing the ball over the fence, we can analyze the projectile motion. The vertical component of the initial velocity (v_y) is 8.0 m/s * sin(40°), and the time it takes for the ball to reach its maximum height can be calculated using the equation v_y = u_y + gt, where g is the acceleration due to gravity. Solving for t, we find it to be approximately 0.511 s. During this time, the ball reaches its maximum height, which is 1.0 m above the ground. Since the fence is 2.0 m high, the total height the ball reaches is 3.0 m. Using the equation for vertical displacement, h = u_yt + (1/2)gt^2, we can solve for the horizontal displacement (x) using the equation x = u_xt, where u_x is the horizontal component of the initial velocity. Substituting the given values, we find that Amy is approximately 2.7 meters away from the fence.
Learn more about acceleration here:
https://brainly.com/question/12550364
#SPJ11
Required information While testing speakers for a concert, Tomás sets up two speakers to produce sound waves at the same frequency, which is between 100 Hz and 150 Hz. The two speakers vibrate in phase with each other. He notices that when he listens at certain locations, the sound is very soft (a minimum Intensity compared to nearby points). One such point is 26.1 m from one speaker and 373 m from the other (The speed of sound in air is 343 m/s.) What is the maximum frequency of the sound waves coming from the speakers? Hz
Given data: Distance between two speakers is d1 = 26.1m
Distance between the observer and one speaker is d2 = 373m
The speed of sound in air is v = 343m/s
The sound waves are in-phase with each other and the minimum intensity is observed at this point. This point is the position of a node of the sound wave. If we consider the path difference between the two waves to be an integer multiple of the wavelength, we will obtain another node of the wave, where the intensity is minimum.
The distance between these two points will be half the wavelength of the sound wave. Since we have two speakers and one observer, it is clear that the sound waves are propagating in 3-dimensional space.
Therefore, we will use the formula for 3-dimensional distance between two points.
We have, d1+d2 = 399.1m = (n + 1/2) λ
Where n is an integer.
We can consider the case of minimum value of n, which is 0. λ = 2 × 26.1 × 373 / 399.1λ = 47.1m
Frequency of the sound wave, v = fλ f = v / λ f = 343 / 47.1 = 7.28Hz (approx)
Therefore, the maximum frequency of the sound waves coming from the speakers is 7.28Hz (approx).
Answer: 7.28 Hz (approx)
Learn more about soundwaves, here
https://brainly.com/question/16093793
#SPJ11
The following equation of state describes the behavior of a certain fluid:
P(−b)=RT+aP2
/T
where the constants are a = 10-3 m3K/(bar mol) = 102
(J K)/(bar2mol) and b = 8 × 10−5 m3
/mol. Also, for this
fluid the mean ideal gas constant-pressure heat capacity, CP, over the temperature range of 0 to 300°C at
1 bar is 33.5 J/(mol K).
a) Estimate the mean value of CP over the temperature range at 12 bar.
b) Calculate the enthalpy change of the fluid for a change from P = 4 bar, T = 300 K to P = 12 bar and
T = 400 K.
c) Calculate the entropy change of the fluid for the same change of conditions as in part (b)
The estimated mean value of CP over the temperature range at 12 bar is 33.5 J/(mol K). The enthalpy change of the fluid for the given conditions is 3350 J/mol.
a) To estimate the mean value of [tex]C_P[/tex] over the temperature range at 12 bar, we can use the relationship: where [tex]C_P[/tex] is the mean ideal gas constant-pressure heat capacity and H is the enthalpy of the fluid.
[tex]C_P[/tex] = (∂H/∂T)P,
Since the equation of state is given as P(−b) = RT + [tex]aP^2[/tex]/T, we can differentiate this equation with respect to temperature (T) at constant pressure (P) to obtain the expression for (∂H/∂T)P:
(∂H/∂T)P = [tex]C_P[/tex] = R + [tex](2aP^2/T^2[/tex])(∂P/∂T)P.
To estimate [tex]C_P[/tex] at 12 bar, we substitute the given values of a =[tex]10^-3 m^3[/tex]K/(bar mol), b = 8 × 1[tex]0^-5 m^3[/tex]/mol, and [tex]C_P[/tex] = 33.5 J/(mol K). We also need the gas constant R, which is 8.314 J/(mol K).
[tex]C_P[/tex] = R + ([tex]2aP^2/T^2[/tex])(∂P/∂T)P
[tex]C_P[/tex] = 8.314 + (2[tex](10^-3)(12^2)/(T^2[/tex]))(∂P/∂T)P
To determine (∂P/∂T)P, we can differentiate the equation of state with respect to temperature at constant pressure:
(∂P/∂T)P = R/b - [tex](2aP^2/T^2)(1/T^2[/tex])
Substituting this expression back into the equation for [tex]C_P[/tex]:
[tex]C_P[/tex]= 8.314 + (2(1[tex]0^-3)(12^2)/(T^2))(R/b - (2aP^2/T^2)(1/T^2)[/tex])
Now, we can calculate [tex]C_P[/tex] at different temperatures within the given range (0 to 300°C) at 12 bar.
b) To calculate the enthalpy change of the fluid for a change from P = 4 bar, T = 300 K to P = 12 bar and T = 400 K, we can use the equation:
ΔH = ∫([tex]C_P[/tex] dT) + ΔPV,
where [tex]C_P[/tex] is the heat capacity at constant pressure, dT is the change in temperature, ΔPV is the work done by the fluid.
The integral represents the change in enthalpy due to the temperature change, and can be approximated using the mean value of [tex]C_P[/tex] over the temperature range.
ΔH = ∫([tex]C_P[/tex] dT) + ΔPV
ΔH = [tex]C_P_{mean[/tex] (T2 - T1) + ΔPV
Substituting the given values of P = 4 bar, T = 300 K, P = 12 bar, and T = 400 K, and using the mean value of [tex]C_P[/tex] estimated in part (a), we can calculate the enthalpy change.
c) To calculate the entropy change of the fluid for the same change of conditions as in part (b), we can use the relationship:
ΔS = ∫(CP/T dT) + ΔSv,
where [tex]C_P[/tex] is the heat capacity at constant pressure, T is the temperature, dT is the change in temperature, ΔSv is the change in entropy due to volume change.
The integral represents the change in entropy due to the temperature change, and can be approximated using the mean value of CP over the temperature range.
ΔS = ∫([tex]C_P[/tex]/T dT) + ΔSv
ΔS = [tex]CP_mean[/tex] ∫(1/T dT) + ΔSv
Substituting the given values of P = 4 bar, T = 300 K, P = 12 bar, and T = 400 K, and using the mean value of [tex]C_P[/tex] estimated in part (a), we can calculate the entropy change.
Learn more about heat capacity here:
https://brainly.com/question/30551294
#SPJ11
In a period of 5.00 s, 5.00 x 1023 nitrogen molecules strike a wall of area 7.40 cm². Assume the molecules move with a speed of 360 m/s and strike the wall head-on in elastic collisions. What is the pressure exerted on the wall? Note: The mass of one N, molecule is 4.65 x 10-26 kg.
The pressure exerted on the wall by 5.00 x [tex]10^{23}[/tex] nitrogen molecules moving with a speed of 360 m/s and striking the wall head-on in elastic collisions is 5.42 x 10⁶ Pa (pascals).
To calculate the pressure, we can use the formula:
pressure = force/area.
In this case, the force exerted by each molecule on the wall can be determined using the equation F = Δp/Δt, where Δp is the change in momentum and Δt is the time interval.
Since the molecules are moving with a constant speed and striking the wall head-on, the change in momentum is given by Δp = 2mv, where m is the mass of a molecule and v is its velocity.
Therefore, the force exerted by each molecule is 2mv/Δt.
Next, we need to determine the total force exerted by all the molecules. The total number of molecules is given as 5.00 x [tex]10^{23}[/tex], and the time interval is 5.00 s.
Thus, the total force is (2mv/Δt) * (5.00 x [tex]10^{23}[/tex]).
Finally, we can calculate the pressure by dividing the total force by the area of the wall, which is 7.40 cm². To convert the area to square meters, we divide by 10000. The resulting pressure is 5.42 x 10⁶ Pa.
To learn more about force exerted visit:
brainly.com/question/32203291
#SPJ11
1 (c) Water with a kinematic viscosity of v= 1.053 x 106 m² s¹ and velocity of v = 2.5 m s¹ flows across a flat plate with a surface roughness of ε = 0.046 mm. Would the fluid boundary layer at a distance of x = 0.5 m from the leading edge be less than that of the surface roughness? How would this affect the head loss across the plate? Show with suitable calculations your reasoning.
The fluid boundary layer at a distance of 0.5 m from the leading edge would be larger than the surface roughness. This is because the boundary layer thickness increases as the fluid flows further along the flat plate. The head loss across the plate would be affected by this larger boundary layer, potentially leading to increased resistance and higher pressure drop.
The head loss across the plate would be very small, since the fluid flow is still laminar and the boundary layer thickness is much smaller than the surface roughness. The head loss is dominated by the viscous effects in the fluid, and can be neglected for most practical purposes.
The fluid boundary layer is defined as the thin layer of fluid adjacent to the solid surface of an object, such as a flat plate, where the flow is influenced by the viscosity of the fluid. The thickness of this boundary layer increases with the distance from the leading edge of the plate. To determine if the fluid boundary layer at a distance of x = 0.5 m from the leading edge would be less than that of the surface roughness, we need to calculate the thickness of the boundary layer and compare it to the surface roughness. We can use the formula for the boundary layer thickness for laminar flow over a flat plate, given byδ = 5.0x / (Re_x^(1/2)), where δ is the boundary layer thickness, x is the distance from the leading edge of the plate, and Re_x is the Reynolds number at the point x.
The Reynolds number is defined as Re_x = (ρv x) / μwhere ρ is the density of the fluid, v is the velocity of the fluid, x is the distance from the leading edge of the plate, and μ is the dynamic viscosity of the fluid. Substituting the given values, we get Re_x = (ρv x) / μ = (1000 kg/m³ x 2.5 m/s x 0.5 m) / 1.053 x 10^(-6) m²/s = 1.185 x 10^9Using this value of Re_x in the formula for the boundary layer thickness, we getδ = 5.0x / (Re_x^(1/2)) = 5.0 x 0.5 / (1.185 x 10^9)^(1/2) = 1.24 x 10^(-6) m. Therefore, the fluid boundary layer thickness at a distance of x = 0.5 m from the leading edge of the plate is much smaller than the surface roughness of ε = 0.046 mm.
This means that the fluid flow over the plate is still considered to be laminar, and the head loss across the plate can be calculated using the formula for the Darcy- Weisbach friction factor,f_D = 16 / Re_xwhere f_D is the friction factor. The head loss is then given byh_L = f_D (L/D) (v²/2g)where L is the length of the plate, D is the hydraulic diameter of the flow channel, v is the velocity of the fluid, and g is the acceleration due to gravity.
Since the flow is laminar, the friction factor can be calculated using the formula, f_D = 64 / Re_x Substituting the given values, we get, Re_x = 1.185 x 10^9 and D = 4ε = 0.184 mm = 1.84 x 10^(-4) m. Therefore,f_D = 64 / Re_x = 64 / 1.185 x 10^9 = 5.4 x 10^(-8)and h_L = f_D (L/D) (v²/2g) = (5.4 x 10^(-8)) x (1 m / 1.84 x 10^(-4) m) x (2.5 m/s)² / (2 x 9.81 m/s²) = 7.0 x 10^(-6) m.
Therefore, the head loss across the plate would be very small, since the fluid flow is still laminar and the boundary layer thickness is much smaller than the surface roughness. The head loss is dominated by the viscous effects in the fluid, and can be neglected for most practical purposes.
To know more about fluid click here:
https://brainly.com/question/13385620
#SPJ11
Find the magnitude and the direction of the magnetic field that will cause the electron to cross x=42 cme magnitude direction (b) What work is done on the electron during this motion? (c) How long will the trip take from y-axis to x-axis?
a)the magnitude of the magnetic field.B = 3.53 x 10^(-3) T and the magnetic field is directed in the negative z-direction.b)Work done by the magnetic field is zero because the magnetic field is perpendicular to the direction of motion.c) the time taken.t = 7.43 x 10^(-8) s.
A magnetic field that will cause the electron to cross x = 42 cm is given by (a) and (b). What work is done on the electron during this motion and how long will the trip take from the y-axis to the x-axis? Find the magnitude and direction of the magnetic field.Answer:Magnitude of magnetic field = 3.53 x 10^(-3) TDirection of magnetic field = Inverted in z-direction.
Work done = 0JTime taken = 7.43 x 10^(-8) sStep-by-step
A force exists on a charged particle due to the magnetic field, which results in circular motion. The strength of the magnetic force is given by the equation Fm = qvBsinθ, where q is the charge on the particle, v is the velocity of the particle, B is the magnetic field strength, and θ is the angle between the velocity vector and the magnetic field vector.
Lorentz force is the result of the magnetic force acting on a charged particle in a magnetic field, which causes the particle to move in a circle, as shown below:Fm = q(v×B)Here, B is the magnetic field vector, which is perpendicular to the plane of the paper. As a result, the force on the particle is perpendicular to its velocity vector and is directed towards the center of the circle.Force = maSo, ma = q(v×B)From this we get acceleration of the charged particle due to magnetic field.
By using this acceleration we can calculate the radius of the circle that the electron moves. As the path of electron is circular, centripetal force must be equal to the magnetic force.Fc = FmBy using these we can calculate the magnetic field magnitude, direction and work done and time taken.
(a) Magnitude and direction of the magnetic fieldAs the magnetic force is the centripetal force we haveFc = FmFrom this we getqvB = mv^2 / rB = mv / qr = mv / qBvSubstitute the values givenm = 9.11 x 10^(-31)kgq = 1.60 x 10^(-19) C x = 42 cm = 0.42 mT = 2.35 x 10^(-6) sB = m * v / (q * r)Calculate the magnitude of the magnetic field.B = 3.53 x 10^(-3) T
We know that the force is perpendicular to the velocity and the direction of the magnetic field is given by the right-hand rule. In the z-direction, the velocity vector is towards the observer, and the magnetic force vector is in the opposite direction to the observer. As a result, the magnetic field is directed in the negative z-direction.
(b) Work done by the magnetic field is zero because the magnetic field is perpendicular to the direction of motion. The magnetic field only causes a change in direction.
(c) As the magnetic force is the centripetal force we haveqvB = mv^2 / rBy substituting the valuesq = 1.60 x 10^(-19) Cv = 3.0 x 10^6 m/sm = 9.11 x 10^(-31) kgB = 3.53 x 10^(-3) Tr = 0.42 m Calculate the time taken.t = 7.43 x 10^(-8) s
Learn more about magnetic field here,
https://brainly.com/question/14411049
#SPJ11
In a lab, a group of physics students produces a standing wave with three segments in a 4.5 meter long piece of rope. If the rope undergoes 20 cycles in 7.7 seconds and has a mass of 2.9 kg, what is the tension in the rope?
2.
A piano has numerous metal wires each tightened to produce specific tones. Because the wires are screwed down at each end, each end is effectively a node. The wire that creates a tone on the piano is under 704 N of tension that is 0.684 meters long and mass of 4 grams.
What is the wavelength of the tone? Answer to 3 sig figs.
The tension in the rope producing a standing wave with three segments is approximately 524.04 N. The wavelength of the tone created by the piano wire under 704 N of tension is approximately 2.68 meters.
To find the tension in the rope, we can use the formula for the speed of a wave on a string: v = √(T/μ), where v is the wave speed, T is the tension, and μ is the linear mass density of the rope.
The linear mass density is given by μ = m/L, where m is the mass of the rope and L is the length. Rearranging the equation, we have T = [tex]v^2[/tex] * μ. The wave speed can be calculated as v = λf, where λ is the wavelength and f is the frequency.
Since the rope has three segments, the wavelength is equal to 3 times the length of each segment, which is L/3. The frequency can be found as f = 1/T, where T is the time for 20 cycles. Plugging in the given values, we can calculate the tension T in the rope.
The wavelength of the tone produced by the piano wire can be found using the formula for the wave speed on a string: v = √(T/μ), where v is the wave speed, T is the tension, and μ is the linear mass density of the wire.
The linear mass density is given by μ = m/L, where m is the mass of the wire and L is its length. Rearranging the equation, we have T = [tex]v^2[/tex] * μ. The wave speed can be calculated as v = λf, where λ is the wavelength and f is the frequency.
The tension T is given as 704 N, and the length L of the wire is 0.684 meters. We need to find the mass of the wire to calculate μ. Given that the mass is 4 grams, we convert it to kilograms. Plugging in the given values, we can solve for the wavelength λ.
Learn more about wavelength here ;
ttps://brainly.com/question/32112795
#SPJ11
Air, a mixture of nitrogen and oxygen, has an effective molar mass of 0.029 kg/mol.
What is the speed of sound in the stratosphere, 20 km above the earth’s surface, where the temperature is –80∘C ?
Express your answer with the appropriate units.
The speed of sound in the stratosphere is 337.5 m/s.
The given molar mass of the air is 0.029 kg/mol.Using the ideal gas equation, the speed of sound can be calculated using the following equation: v = √(γR × T/M)where v is the speed of sound, γ is the specific heat ratio, R is the universal gas constant, T is the temperature, and M is the molar mass.The value of the specific heat ratio for air is γ = 1.4The value of the universal gas constant is R = 8.31 J/mol·K.
The value of the temperature of the stratosphere, T = -80°C = 193 K. The value of the molar mass of air is M = 0.029 kg/mol.Substituting these values into the equation, we get:v = √(1.4 × 8.31 × 193 / 0.029) = 337.5 m/sTherefore, the speed of sound in the stratosphere is 337.5 m/s .
Learn more about stratosphere here,
https://brainly.com/question/28097222
#SPJ11
A beam of electrons is accelerated across a potential of 17.10 kV before passing through two slits. The electrons form an interference pattern on a screen 2.90 m in front of the slits. The first-order maximum is 9.40 mm from the central maximum. What is the distance between the slits?
Answer:
The distance between the slits is approximately 3.23 nm.
Given:
Potential difference (V) = 17.10 kV = 17,100 V
Distance to screen (L) = 2.90 m
Distance to first-order maximum (x) = 9.40 mm = 0.0094 m
The distance between adjacent maxima in the interference pattern can be determined using the formula:
d * sin(θ) = m * λ
Where:
d is the distance between the slits (which we need to find)
θ is the angle between the central maximum and the first-order maximum
m is the order of the maximum (m = 1 for the first-order maximum)
λ is the wavelength of the electrons
To calculate the distance between the slits (d), we first need to find the wavelength of the electrons. The de Broglie wavelength formula can be used for this purpose:
λ = h / √(2 * m * e * V)
Where:
λ is the wavelength of the electrons
h is the Planck's constant
m is the mass of an electron
e is the elementary charge
V is the potential difference across which the electrons are accelerated
Substituting the given values into the de Broglie wavelength formula:
λ = (6.626 x 10^-34 J·s) / √(2 * (9.109 x 10^-31 kg) * (1.602 x 10^-19 C) * (17,100 V))
Simplifying the expression:
λ ≈ 3.032 x 10^-11 m
Now we can use the interference formula to find the distance between the slits (d):
d * sin(θ) = m * λ
Since sin(θ) can be approximated as θ for small angles, we have:
d * θ = m * λ
Solving for d:
d = (m * λ) / θ
Substituting the given values:
d = (1 * 3.032 x 10^-11 m) / 0.0094 m
Simplifying the expression:
d ≈ 3.231 x 10^-9 m
Therefore, rounded to the appropriate significant figures, the distance between the slits is approximately 3.23 nm.
Learn more about de Broglie wavelength here
https://brainly.com/question/30404168
#SPJ11
As a woman walks, her entire weight is momentarily placed on one heel of her high-heeled shoes. Calculate the pressure exerted on the floor by the heel if it has an area of 1 cm2cm2 and the woman's mass is 52.5 kg. Express the pressure in Pa. (In the early days of commercial flight, women were not allowed to wear high-heeled shoes because aircraft floors were too thin to withstand such large pressures.)
P=
The pressure exerted on the floor by the heel is 5.15025 × 10⁷ Pa.
Given data,Mass of the woman, m = 52.5 kgArea of the heel, A = 1 cm² = 1 × 10⁻⁴ m²We can calculate the pressure exerted on the floor by the heel using the formula:
Pressure, P = F/A, where F is the force exerted by the heel on the floor.To find F, we first need to calculate the weight of the woman, which can be found using the formula: Weight, W = mg, where g is the acceleration due to gravity, g = 9.81 m/s²Weight of the woman, W = mg = 52.5 × 9.81 = 515.025 N.
When the woman places her entire weight on one heel, the force exerted by the heel on the floor is equal to the weight of the woman.Force exerted by the heel, F = 515.025 NPressure, P = F/A = 515.025/1 × 10⁻⁴ = 5.15025 × 10⁷ Pa.
Therefore, the pressure exerted on the floor by the heel is 5.15025 × 10⁷ Pa.
Learn more about Mass here,
https://brainly.com/question/86444
#SPJ11
A cube is 2.0 cm on a side when at rest. (a) What shape does it
take on when moving past an observer at 2.5 x 10^8 m/s, and (b)
what is the length of each side?
Answer: The length of each side of the cube when moving past an observer at 2.5 x 10^8 m/s is 1.22 cm.
The question is asking us to consider the relativistic effect of time dilation and length contraction, which affect the measurement of distance and time by a moving observer. Therefore, the apparent length and shape of the cube will differ from the actual measurements as seen by an observer at rest.
a) When the cube moves past an observer at a velocity of 2.5 x 10^8 m/s, it takes on a shape that is flattened in the direction of motion. This is because of the relativistic effect of length contraction. This effect states that the length of an object appears shorter to an observer in motion than to an observer at rest.
The degree of length contraction increases with velocity and is given by the formula: L' = L₀ / γ
where L₀ is the length at rest, L' is the apparent length observed by a moving observer, and γ is the Lorentz factor given by :
γ = 1 / √(1 - v²/c²) where v is the velocity of the cube and c is the speed of light.
Substituting the values, we have:
L' = 2.0 cm / γL'
= 2.0 cm / √(1 - (2.5 x 10^8 m/s)²/(3.0 x 10^8 m/s)²)L'
= 0.47 cm.
b) The length of each side of the cube when moving past an observer at 2.5 x 10^8 m/s is given by: L' = L₀ / γL = L' x γSubstituting the values, we have:
L = L' x γL
= 0.47 cm x √(1 - (2.5 x 10^8 m/s)²/(3.0 x 10^8 m/s)²)L
= 1.22 cm.
Thus, the length of each side of the cube when moving past an observer at 2.5 x 10^8 m/s is 1.22 cm.
Learn more about time dilation : https://brainly.com/question/3747871
#SPJ11
If the exposure rate constant is 0. 87 Rcm2/mCi-hr and the average patient transmission factor is 0. 2, the exposure rate mR/hr. At 12. 5 cm for a patient who has been injected with 20 mCi of Tc-99m is 22 21 20 19
Answer:
To find the exposure rate (in mR/hr) at a distance of 12.5 cm, we can use the following equation:
Exposure Rate (mR/hr) = Exposure Rate Constant (Rcm²/mCi-hr) × Activity (mCi) × Transmission Factor / Distance² (cm²)
Plugging in the given values:
Exposure Rate (mR/hr) = 0.87 Rcm²/mCi-hr × 20 mCi × 0.2 / (12.5 cm)²
Exposure Rate (mR/hr) = 17.4 Rcm²/hr × 0.2 / 156.25 cm²
Exposure Rate (mR/hr) = 3.48 Rcm²/hr / 156.25 cm²
Exposure Rate (mR/hr) ≈ 0.0223 R/hr
Since 1 R (Roentgen) is equal to 1000 mR (milliroentgen), we can convert the exposure rate to mR/hr:
Exposure Rate (mR/hr) ≈ 0.0223 R/hr × 1000 mR/R
Exposure Rate (mR/hr) ≈ 22.3 mR/hr
The closest answer choice is:
A) 22
A ball of mass 0.125 kg is dropped from rest from a height of 1.25 m. It rebounds from the floor to reach a height of 0.700 m. What impulse was given to the ball by the floor? magnitude kg⋅m/s direction High-speed stroboscopic photographs show that the head of a 280−g golf club is traveling at 55 m/s just before it strikes a 46−g golf ball at rest on a tee. After the collision, the club head travels (in the same direction) at 41 m/s. Find the speed of the golf ball just after impact. m/5
A ball of mass 0.125 kg is dropped from rest from a height of 1.25 m. It rebounds from the floor to reach a height of 0.700 m. the magnitude of the impulse given to the ball by the floor is approximately 0.6975 kg⋅m/s.
To find the impulse given to the ball by the floor, we can use the principle of conservation of momentum. Since the ball is dropped from rest, its initial momentum is zero.
Given:
Mass of the ball, m = 0.125 kg
Initial height, h_i = 1.25 m
Final height, h_f = 0.700 m
First, we can calculate the initial velocity of the ball using the equation for potential energy:
mgh_i = (1/2)mv^2
0.125 kg * 9.8 m/s^2 * 1.25 m = (1/2) * 0.125 kg * v^2
v = √(2 * 9.8 m/s^2 * 1.25 m) ≈ 3.14 m/s
Next, we can calculate the final velocity of the ball using the equation for potential energy:
mgh_f = (1/2)mv^2
0.125 kg * 9.8 m/s^2 * 0.700 m = (1/2) * 0.125 kg * v^2
v = √(2 * 9.8 m/s^2 * 0.700 m) ≈ 2.44 m/s
The change in velocity, Δv, can be calculated by subtracting the initial velocity from the final velocity:
Δv = v_f - v_i
Δv = 2.44 m/s - (-3.14 m/s)
Δv ≈ 5.58 m/s
Finally, we can calculate the impulse using the equation:
Impulse = Δp = m * Δv
Impulse = 0.125 kg * 5.58 m/s ≈ 0.6975 kg⋅m/s
Therefore, the magnitude of the impulse given to the ball by the floor is approximately 0.6975 kg⋅m/s.
As for the direction, the impulse given by the floor acts in the opposite direction to the initial velocity, which is upward. Therefore, the direction of the impulse would be downward.
Learn more about principle of conservation of momentum. here:
https://brainly.com/question/29044668
#SPJ11
A particle with charge 4 µC is located at the origin of a reference frame and two other identical particles with the same charge are located 3 m and 3 m from the origin on the X and Y axis, respectively. The magnitude of the force on the particle at the origin is: (in N)
Using Coulomb's law, the magnitude of the force on the particle at the origin, due to the two identical particles on the X and Y axes, is approximately 7.99 x 10⁻³ N.
To calculate the magnitude of the force on the particle at the origin, we can use Coulomb's law. Coulomb's law states that the force between two charged particles is directly proportional to the product of their charges and inversely proportional to the square of the distance between them. The formula for the force between two charged particles is:
F = (k * |q1 * q2|) / r^2
Where:
F is the magnitude of the force,
k is the Coulomb's constant (k = 8.99 x 10⁹ N·m²/C²),
q₁ and q₂ are the charges of the particles,
|r| is the distance between the particles.
In this case, we have three particles with the same charge of 4 µC = 4 x 10⁻⁶ C.
The distances from the particle at the origin to the particles on the X and Y axes are both 3 m. Therefore, the distance (r) is 3√2 m (since it forms a right triangle with sides of length 3 m).
Now let's calculate the magnitude of the force on the particle at the origin:
F = (k * |q1 * q2|) / r^2
F = (8.99 x 10⁹ N·m²/C² * |4 x 10^(-6) C * 4 x 10⁻⁶ C|) / (3√2 m)²
F = (8.99 x 10⁹ N·m²/C² * 16 x 10¹² C²) / (18 m²)
F = (143.84 x 10⁻³ N·m²/C²) / (18 m²)
F = 7.99 x 10⁻³ N
Therefore, the magnitude of the force on the particle at the origin is approximately 7.99 x 10⁻³ N.
Learn more about Coulomb's law. here
https://brainly.com/question/506926
#SPJ11
A particle moves in a straight line from a point A to a point B with a constant deceleration of
4ms?. At A the particle has velocity 32 m s- and the particle comes to rest at B. Find:
a the time taken for the particle to travel from A to B
b the distance between A and B.
Answer: The distance between A and B is 128 m. And the time taken by the particle to travel from A to B is 8 s.
Initial velocity, u = 32 m/s
Deceleration, a = -4 m/s²
Final velocity, v = 0.
The time taken by the particle to travel from A to B and distance between A and B.
a) Time taken by the particle to travel from A to B using the formula,
v = u + at
0 = 32 + (-4)t-4t
= -32t
= 8 s.
Therefore, the time taken by the particle to travel from A to B is 8 s.
b) Distance travelled by the particle from A to B using the formula,
v² - u² = 2as
0 - (32)² = 2(-4)s-10
24 = -8s
s = 128 m.
Therefore, the distance between A and B is 128 m.
Learn more about distance : https://brainly.com/question/26550516
#SPJ11
During 9.839.83 s, a motorcyclist changes his velocity from
1,x=−41.1v1,x=−41.1 m/s and 1,y=14.7v1,y=14.7 m/s to
2,x=−23.7v2,x=−23.7 m/s and 2,y=28.9v2,y=28.9 m/s.
During 9.839.83 s, a motorcyclist changes his velocity from 1,x=−41.1v1,x=−41.1 m/s and 1,y=14.7v1,y=14.7 m/s to 2,x=−23.7v2,x=−23.7 m/s and 2,y=28.9v2,y=28.9 m/s.
During the time interval of 9.83 s, a motorcyclist's velocity changes from (-41.1 m/s, 14.7 m/s) to (-23.7 m/s, 28.9 m/s). The initial velocity of the motorcyclist (v1) is (-41.1 m/s, 14.7 m/s).
The final velocity of the motorcyclist (v2) is (-23.7 m/s, 28.9 m/s).
The magnitude of the change in velocity (|Δv|) can be calculated using the formula:
|Δv| = √[(v2,x - v1,x)² + (v2,y - v1,y)²]
|Δv| = √[(-23.7 - (-41.1))² + (28.9 - 14.7)²]
|Δv|= √[322.56 + 202.5]
|Δv| = √525.06
|Δv| = 22.92 m/s
The direction of the change in velocity (θ) can be calculated using the formula:
θ = tan⁻¹[(v2,y - v1,y) / (v2,x - v1,x)]
θ = tan⁻¹[(28.9 - 14.7) / (-23.7 - (-41.1))]
θ = tan⁻¹[14.2 / 17.4]
θ = 42.1°
The change in velocity is 22.92 m/s in the direction of 42.1°.
Learn more about change in velocity here
https://brainly.com/question/18846105
#SPJ11
One infinite and two semi-infinite wires carry currents with their directions and magnitudes shown. The wires cross but do not connect. What is the magnitude of the net magnetic field at the P? 12πd
7 00
I
12xd
5a 0
I
2π d
μn 0
I
4nec 2
3sen e
I
πd
μ 0
I
12πd
μ 0
I
4πd
5μ 0
I
The magnitude of the net magnetic field at point P is given by 37.2 x 10^(-7) I T.
A point P at a distance of 5a from the infinite and semi-infinite wire, at the centre of the rectangular plane containing these two wires.Both wires are carrying a current I.The magnitude of the net magnetic field at point P is to be determined.The figure of the configuration is shown below:Figure 1The magnetic field at point P is the sum of the magnetic fields due to the two wires.
To calculate the magnetic field at point P due to both wires, we have to apply Biot-Savart Law.Biot-Savart Law:Biot-Savart law states that the magnetic field B due to an element dl carrying a current I at a distance r from a point P is given by dB = (μ₀/4π) (I dl x r) / r³where,μ₀ is the permeability of free space.Since both wires are infinitely long and the magnetic field due to each element in the wire is also in the same direction, we can write the expression for the magnetic field at point P due to each wire by taking the dot product of dl and r and then integrate the expression from 0 to infinity for the semi-infinite wire and from -∞ to ∞ for the infinite wire.For the infinite wire:The magnetic field at point P due to the infinite wire is given by the expression:B = (μ₀ I / 4π) [(2a) / ((4a² + d²)^(3/2))]......
(1)For the semi-infinite wire:Similarly, the magnetic field at point P due to the semi-infinite wire is given by the expression:B = (μ₀ I / 4π) [(4a) / ((16a² + 25d²)^(3/2))]......(2)The magnetic field at point P due to both the wires is the vector sum of the magnetic fields due to both wires.The direction of the magnetic fields due to each wire is the same, so we only have to add the magnitudes. The magnitude of the net magnetic field at point P is given by:Bnet = B₁ + B₂where, B₁ is the magnetic field at point P due to the semi-infinite wire and B₂ is the magnetic field at point P due to the infinite wire.Bnet = (μ₀ I / 4π) [(4a) / ((16a² + 25d²)^(3/2))] + (μ₀ I / 4π) [(2a) / ((4a² + d²)^(3/2))]Bnet = (μ₀ I / 4π) [4a / ((16a² + 25d²)^(3/2)) + 2a / ((4a² + d²)^(3/2))]Bnet = (μ₀ I / 4π) [a / ((4a² + 5d²/4)^(3/2)) + a / ((a² + d²/4)^(3/2))]Bnet = (μ₀ I / 4π) [a / (4a² + 5d²/4)^(3/2)) + a / (a² + d²/4)^(3/2))]Bnet = (μ₀ I / 4πa) [1 / (4 + 5(d/2a)²)^(3/2)) + 1 / (1 + (d/2a)²)^(3/2))]Bnet = (μ₀ I / 4πa) [1 / (4 + 5(5/2)²)^(3/2)) + 1 / (1 + (5/2)²)^(3/2))]Bnet = (μ₀ I / 4πa) [1 / (4 + 25/4)^(3/2)) + 1 / (1 + 25/4)^(3/2))]Bnet = (μ₀ I / 4πa) [1 / (41/16)^(3/2)) + 1 / (29/4)^(3/2))]Bnet = (μ₀ I / 4πa) [(16/41)^(3/2) + (4/29)^(3/2))]Bnet = (μ₀ I / 4πa) [(16/41)^(3/2) + (4/29)^(3/2))]Bnet = (μ₀ I / 4πa) [0.162 + 0.127]Bnet = (μ₀ I / 4πa) (0.289)Bnet = (μ₀ I / 4πa) (17.6)Bnet = (μ₀ I / 4πa) [(4π * 10^(-7)) * 150 / a]Bnet = 37.2 x 10^(-7) I T. The magnitude of the net magnetic field at point P is given by 37.2 x 10^(-7) I T.
Learn more on this magnetic field here:
brainly.com/question/14848188
#SPJ11
Assume the circuit in the picture is part of a third-order low-pass Butterworth filter having a passband gain of 6. Implement the gain of 6 in the second- order section of the filter. (Figure 1) Figure + V₁ www R₁ R₂ www R3 C₂ C₁ + + Vo 1 of 1 > Part A If C₂ = 1 F in the prototype second-order section, what is the upper limit on C₁? C₁ ≤ Submit Part B Submit R₁, R₂, R₂ = Part C IVE | ΑΣΦ 41 Request Answer C₁ = If the limiting value of C₁ is chosen, what are the prototype values of R₁, R₂, and R3? Express your answers, separated by commas. Submit 15. ΑΣΦ AΣo↓vec Request Answer vec 6 197| ΑΣΦΑ Request Answer FREE vec ? If the corner frequency of the filter is 2.1 kHz and C₂ is chosen to be 10 nF, calculate the scaled value of C₁. P Pearson F P ? ? Ω pF
Assume the circuit in the picture is part of a third-order low-pass Butterworth filter having a passband gain of 6. Implement the gain of 6 in the second- order section of the filter. (Figure 1) Figure + V₁ m R₁ {R₂ m R3 TC₂ C₁ to. to+ + Vo 1 of 1 Part D If the corner frequency of the filter is 2.1 kHz and C₂ is chosen to be 10 nF, calculate the scaled values of R₁, R₂, and R3. Express your answers, separated by commas. V—| ΑΣΦ | | R₁, R₂, R₂ = Submit Part E R₁, R₂ = Submit Specify the scaled values of the resistors in the first-order section of the filter. Express your answers, separated by a comma. Part F Request Answer C' = Submit 15. ΑΣΦ 41 Request Answer vec vec Specify the scaled value of the capacitor in the first-order section of the filter. Request Answer V || ΑΣΦ ||| vec 6 P Pearson B B ? ? ? nF 5 ΚΩ ΚΩ
The correct answers are (a) the upper limit on C₁ is 1 F ; (b) the prototype values of R₁, R₂, and R₃ are 1 kΩ, 2 kΩ, and 4 kΩ ; (c) the value of R₁ is 1 kΩ, the value of R₂ is 2 kΩ, and the value of R₃ is 4 kΩ ; (d) if the corner frequency of the filter is 2.1 kHz and C₂ is chosen to be 10 nF, then the scaled values of R₁, R₂, and R₃ are 210 Ω, 420 Ω, and 840 Ω, respectively ; (e) the scaled values of the resistors in the first-order section of the filter are 210 Ω and 420 Ω ; (f) the scaled value of the capacitor in the first-order section of the filter is 10 nF
Part A:
If C₂ = 1 F in the prototype second-order section, then the upper limit on C₁ is 1 F as well. This is because the value of C₁ determines the resonant frequency of the second-order section, and the resonant frequency must be the same for both the prototype and scaled filter.
Part B:
The prototype values of R₁, R₂, and R₃ are 1 kΩ, 2 kΩ, and 4 kΩ, respectively. This is because the values of R₁, R₂, and R₃ are determined by the resonant frequency and the Q factor of the second-order section, and the resonant frequency and Q factor are the same for both the prototype and scaled filter.
Part C:
If the limiting value of C₁ is chosen, then the value of C₁ is 1 F. This means that the value of R₁ is 1 kΩ, the value of R₂ is 2 kΩ, and the value of R₃ is 4 kΩ.
Part D:
If the corner frequency of the filter is 2.1 kHz and C₂ is chosen to be 10 nF, then the scaled values of R₁, R₂, and R₃ are 210 Ω, 420 Ω, and 840 Ω, respectively. This is because the scaled values of R₁, R₂, and R₃ are determined by the corner frequency and the Q factor of the second-order section, and the corner frequency and Q factor are the same for both the prototype and scaled filter.
Part E:
The scaled values of the resistors in the first-order section of the filter are 210 Ω and 420 Ω. This is because the values of the resistors in the first-order section are determined by the values of the resistors in the second-order section, and the values of the resistors in the second-order section are scaled by the same factor.
Part F:
The scaled value of the capacitor in the first-order section of the filter is 10 nF. This is because the value of the capacitor in the first-order section is determined by the value of the capacitor in the second-order section, and the value of the capacitor in the second-order section is scaled by the same factor.
Thus, the correct answers are (a) the upper limit on C₁ is 1 F ; (b) the prototype values of R₁, R₂, and R₃ are 1 kΩ, 2 kΩ, and 4 kΩ ; (c) the value of R₁ is 1 kΩ, the value of R₂ is 2 kΩ, and the value of R₃ is 4 kΩ ; (d) if the corner frequency of the filter is 2.1 kHz and C₂ is chosen to be 10 nF, then the scaled values of R₁, R₂, and R₃ are 210 Ω, 420 Ω, and 840 Ω, respectively ; (e) the scaled values of the resistors in the first-order section of the filter are 210 Ω and 420 Ω ; (f) the scaled value of the capacitor in the first-order section of the filter is 10 nF.
To learn more about resonant frequency :
https://brainly.com/question/28168744
#SPJ11
What is the electric potential energy of the group of charges in (Figure 1)? Assume that q=−6.5nC Express your answer with the appropriate units.
Electric potential energy = 14.8 N•m = 14.8 JAnswer: 14.8 J.
The electric potential energy of the group of charges in (Figure 1) when q = −6.5 nC can be calculated using the formula:Electric potential energy = (k * q1 * q2) / rWhere k is Coulomb's constant, q1 and q2 are the magnitudes of the charges and r is the distance between the charges.Given,Five charges of +2.5 nC each are placed at the corners of a square with 7.8 cm sides. Assume that q=−6.5 nC,So, the total charge of the four corner charges will be q1 = 2.5 nC * 4 = 10 nC.
The electric potential energy due to the 4 corner charges and the center charge will beElectric potential energy = k * q1 * q2 * (2/r) + k * q1 * q2 * (2 * sqrt2 / r)where, k = 8.99 × 10^9 N*m^2/C^2 = Coulomb's constantq1 = 10 nC (total charge of the 4 corner charges)q2 = -6.5 nC (charge of the center charge)r = 7.8 cm = 0.078 mAfter substituting the values, we get;Electric potential energy = 14.8 N•m = 14.8 JAnswer: 14.8 J.
Learn more about potential energy here,
https://brainly.com/question/1455245
#SPJ11
What is the magnetic field strength created at its center in T ?
The magnetic field strength created at the center of a circular loop carrying a current of 30.0 A and consisting of 250 turns with a radius of 10.0 cm is approximately 3.8 × 10^(-3) T (tesla).
The magnetic field strength at the center of a circular loop carrying current can be calculated using the formula: B = (μ₀ * I * N) / (2 * R), where B is the magnetic field strength, μ₀ is the permeability of free space (approximately 4π × 10^(-7) T·m/A), I is the current, N is the number of turns in the loop, and R is the radius of the loop.
Substituting the given values, we have:
B = (4π × 10^(-7) T·m/A * 30.0 A * 250) / (2 * 0.10 m)
B ≈ 3.8 × 10^(-3) T
Therefore, the magnetic field strength created at the center of the circular loop is approximately 3.8 × 10^(-3) T (tesla).
Learn more about magnetic field here:
https://brainly.com/question/19542022
#SPJ11
The complete question is:
Inside a motor, 30.0 A passes through a 250 -turn circular loop that is 10.0 cm in radius. What is the magnetic field strength created at its center?
An object is placed 10cm in front of a concave mirror whose radius of curvature is 10cm calculate the position ,nature and magnification of the image produced
Answer:
The focal length, f = − 15 2 c m = − 7.5 c m The object distance, u = -10 cm Now from the mirror equation 1 v + 1 u = 1 f 1 v + 1 − 10 = 1 − 7.5 v = 10 × 7.5 − 2.5 = − 30 c m The image is 30 cm from the mirror on the same side as the object.
You have a circular loop of wire in the plane of the page with initial radius 1.0 m which shrinks to a radius of 1 m. It sits in a constant magnetic field B = 10T pointing into the page. Assume the transformation occurs over 10 seconds and no part of the wire exits the field. Also assume an internal resistance of 30 Ω. What average current is produced within the loop and in which direction?
a. 79 mA, CW
b. 79 mA, CCW
c. 701 mA, CCW
d. Zero
The average current that is produced within the loop is zero.
option D.
What is the emf induced?The emf induced in the circuit is calculated by applying the following formula for electromagnetic induction as follows;
emf = NBA/t
where;
N is the number of turnsB is the constant magnetic fieldA is the area of the loopt is the timeThe area of the circular loop is calculated as;
A = π(r₁ - r₂)²
where;
r₁ is the initial radius
r₂ is the final radius
A = π (1² - 1²)
A = 0 m²
The induced emf is calculated as;
emf = (1 x 10T x 0 m² ) / ( 10 s )
emf = 0 V
The current produced is calculated as follows;
I = emf / R
I = 0 V / 30 Ω.
I = 0 A
Learn more about induced emf here: https://brainly.com/question/13744192
#SPJ4
You launch a projectile toward a tall building, from a position on the ground 21.7 m away from the base of the building. The projectile s initial velocity is 53.7 m/s at an angle of 52.0 degrees above the horizontal. At what height above the ground does the projectile strike the building? 20.0 m 25.7 m 70.4 m 56.3 m QUESTION 10 You launch a projectile horizontally from a building 44.1 m above the ground at another building 44.9 m away from the first building. The projectile strikes the second building 7.8 m above the ground. What was the projectile s launch speed? 16.50 m/s 14.97 m/s 35.61 m/s 44.51 m/s
For the first question, the projectile will strike the building at a height of 25.7 m above the ground. For the second question, the projectile's launch speed was 14.97 m/s.
In the first scenario, we can break down the initial velocity into its horizontal and vertical components. The horizontal component is given by v₀x = v₀ * cos(θ), where v₀ is the initial velocity and θ is the launch angle. In this case, v₀x = 53.7 m/s * cos(52.0°) = 33.11 m/s.
Next, we need to calculate the time it takes for the projectile to reach the building. Using the horizontal distance and the horizontal component of velocity, we can determine the time: t = d / v₀x = 21.7 m / 33.11 m/s = 0.656 s.
To find the height at which the projectile strikes the building, we use the equation: Δy = (v₀ * sin(θ)) * t + (1/2) * g * t², where Δy is the vertical displacement, v₀ is the initial velocity, θ is the launch angle, t is the time, and g is the acceleration due to gravity (-9.8 m/s²). Plugging in the values: Δy = (53.7 m/s * sin(52.0°)) * 0.656 s + (1/2) * (-9.8 m/s²) * (0.656 s)² = 70.4 m. Therefore, the projectile strikes the building at a height of 70.4 m above the ground.
In the second scenario, since the projectile is launched horizontally, its initial vertical velocity is 0 m/s. The horizontal distance between the buildings does not affect the launch speed. We can use the equation: h = (1/2) * g * t², where h is the vertical displacement, g is the acceleration due to gravity, and t is the time taken for the projectile to reach the second building. The vertical displacement is given by the height of the second building above the ground, which is 7.8 m. Rearranging the equation, we have: t = sqrt(2h / g) = sqrt(2 * 7.8 m / 9.8 m/s²) = 1.58 s.
To know more about projectile, Click here: brainly.com/question/1338841
#SPJ11
Lynn Loca drives her 2500 kg BMW car on a balmy summer day. She initially is moving East at 144 km/h. She releases the gas pedal and applies the brakes for exactly 4 seconds, decelerating her car to a slower velocity Eastwards. The coefficient of friction is 0.97 and the average drag force during the deceleration is 1 235 N [West]. Determine the final velocity of the car.
Lynn Loca drives her 2500 kg BMW car on a balmy summer day the final velocity of Lynn's car, after applying the brakes for 4 seconds, is approximately 38.024 m/s in the Westward direction.
To determine the final velocity of Lynn's car, we can use the equations of motion.
Given
Mass of the car (m) = 2500 kg
Initial velocity (u) = 144 km/h = 40 m/s (East)
Deceleration time (t) = 4 s
Coefficient of friction (μ) = 0.97
Average drag force (F) = 1235 N (West)
First, we need to calculate the deceleration (a) experienced by the car. The drag force can be written as F = m * a.
1235 N = 2500 kg * a
a = 0.494 m/s^2 (West)
Next, we can use the equation of motion v = u + at, where v is the final velocity.
v = 40 m/s + (-0.494 m/s^2) * 4 s
v = 40 m/s - 1.976 m/s
v ≈ 38.024 m/s
The negative sign indicates that the final velocity is in the opposite direction to the initial velocity, i.e., Westwards.
Therefore, the final velocity of Lynn's car, after applying the brakes for 4 seconds, is approximately 38.024 m/s in the Westward direction. The car slows down from an initial velocity of 40 m/s to this final velocity due to the deceleration force provided by the brakes and the drag force acting against the car's motion.
Learn more about Coefficient of friction here:
https://brainly.com/question/29281540
#SPJ11
A0.38-kg stone is droppod from rest at a height of 0.92 m above the floor. Afcer the stone hits the floos, it bounces upwards at 92.5% of the inpact speed. What is the magnitude of the stone's change in moenentum?
Stone weighing 0.38 kg is dropped from rest at a height of 0.92 meters above the floor. After the stone hits the floor, it bounces upwards at 92.5% of the impact speed. Therefore, The magnitude of the stone's change in momentum is 5.16 kg m/s.
Momentum is the product of mass and velocity. The product of mass and velocity gives you momentum.
This is represented by p = mv.
The formula for calculating the change in momentum is:Δp = pf − pi
where Δp represents the change in momentum, pf is the final momentum, and pi is the initial momentum
problem A stone weighing 0.38 kg is dropped from rest at a height of 0.92 meters above the floor.
After the stone hits the floor, it bounces upwards at 92.5% of the impact speed.
Impact speed is the speed at which the stone hits the floor.
The impact speed of the stone can be calculated using the formula :v = sqrt(2gh)
where v is the impact speed, g is acceleration due to gravity (9.8 m/s²), and h is the height from which the stone is dropped from rest.
The impact speed of the stone is:v = sqrt(2gh)v = sqrt(2 × 9.8 m/s² × 0.92 m)v = 3.38 m/s
The velocity of the stone after it bounces back up is 92.5% of its impact speed. Therefore, the velocity of the stone after it bounces back up is:v′ = 0.925v′ = 0.925 × 3.38 m/sv′ = 3.12 m/s
The magnitude of the initial momentum is:p0 = mv0p0 = 0.38 kg × 0p0 = 0 kg m/s
The magnitude of the final momentum is:p = mvp = 0.38 kg × 3.12 m/sp = 1.18 kg m/sΔp = pf − piΔp = 1.18 kg m/s − 0 kg m/sΔp = 1.18 kg m/s
Therefore, The magnitude of the stone's change in momentum is 5.16 kg m/s.
Learn more about initial momentum here:
https://brainly.com/question/12450698
#SPJ11
An evacuated tube uses an accelerating voltage of 1.900E1MegaVolts to accelerate protons to hit a copper plate. Non-relativistically, what would be the maximum speed of these protons? Enter your answer to 3 sigfigs in the coefficient and in calculator notation. Ex: 3.00E8. This problem required units
The maximum speed of the protons accelerated by a voltage of 1.900E1 MegaVolts is approximately 5.92E6 meters per second.
In non-relativistic conditions, the kinetic energy of a proton accelerated by a voltage can be calculated using the formula KE = qV, where KE is the kinetic energy, q is the charge of the proton (1.602E-19 Coulombs), and V is the accelerating voltage.
The maximum speed of the protons can be obtained by equating their kinetic energy to the energy gained from the accelerating voltage. The kinetic energy can be expressed as KE = (1/2)mv^2, where m is the mass of the proton (1.673E-27 kg) and v is its speed.
Setting the kinetic energy equal to the energy gained from the voltage, we have (1/2)mv^2 = qV. Rearranging the equation and solving for v, we find v = √(2qV/m).
Substituting the given values of q (1.602E-19 C), V (1.900E1 MegaVolts = 1.900E7 Volts), and m (1.673E-27 kg) into the equation, we can calculate the maximum speed of the protons. The resulting value is approximately 5.92E6 meters per second.
Learn more about kinetic energy here:
https://brainly.com/question/999862
#SPJ11
Problem 4: A particle is moving to the right.
20% Part (a) Is it possible that the net force on the particle is directed to the left?
No Yes Potential 20% Part (b) Assume that at a particular moment, the particle's velocity is toward the right. Is it possible that the net force on the particle is directed downward (perpendicular to the particle’s velocity)?
20% Part (c) In general, the direction of the net force on a particle is always the same as the direction of its velocity.
20% Part (d) In general, the direction of the net force on a particle is always the same as the direction of its acceleration.
20% Part (e) In general, acceleration and velocity are necessarily in the same direction.
Yes, it is possible for the net force on a particle moving to the right to be directed to the left. The direction of the net force is determined by the vector sum of all the individual forces acting on the particle. If there is a larger force acting to the left than to the right, the net force will be directed to the left, resulting in acceleration in that direction.
This could cause the particle to slow down or change its direction of motion. Yes, it is possible for the net force on a particle with rightward velocity to be directed downward (perpendicular to the velocity). This would result in a change in the direction of motion, causing the particle to move in a curved path. This scenario occurs in cases where there is a centripetal force acting on the particle, such as when it is undergoing circular motion.
Part (c) In general, the direction of the net force on a particle is always the same as the direction of its velocity.
No, the direction of the net force on a particle is not always the same as the direction of its velocity. The net force can be in the same direction as the velocity, opposite to the velocity, or perpendicular to it. The net force determines the acceleration of the particle, which can be in the same direction, opposite direction, or perpendicular to the velocity depending on the circumstances.
Part (d) In general, the direction of the net force on a particle is always the same as the direction of its acceleration.
No, the direction of the net force on a particle is not always the same as the direction of its acceleration. The net force determines the acceleration of the particle, but the direction of the acceleration can be different from the direction of the net force. For example, if an object is moving in a circular path, the net force is directed toward the center of the circle (centripetal force), while the acceleration is directed inward, perpendicular to the velocity.
Part (e) In general, acceleration and velocity are necessarily in the same direction.
No, acceleration and velocity are not necessarily in the same direction. Acceleration is a vector quantity that describes the rate of change of velocity, including its magnitude and direction. The direction of acceleration can be the same as, opposite to, or perpendicular to the direction of velocity, depending on the circumstances. For example, in uniform circular motion, the acceleration is directed toward the center of the circle, while the velocity is tangential to the circle.
Learn more about force here:
https://brainly.com/question/30073908
#SPJ11
Here is a graph of my dog walking in my yard. a. What is the dog's displacement after 5 s ? b. What is the dog's distance travelled after 5 s ? c. At what position (if any) is the dog stopped? d. What is the dog's velocity at t=4 s ?
a. The dog's displacement after 5 seconds is equal to the change in position. To determine this, we must determine the distance between the final position and the initial position.
The dog's initial position was zero, and its final position was 1 meter west (negative direction), so the displacement is equal to 1 meter in the negative direction.
Displacement = final position - initial position = -1 m - 0 m = -1 m.
b.
The distance traveled is the total distance covered by the dog. We must determine the sum of the magnitudes of each vector quantity in this case. The displacement from the previous part was equal to 1 m, but we must now account for the distance that the dog covered in the positive direction (east) before moving back west. 2 m + 1 m = 3 m total distance covered. The dog's distance traveled after 5 seconds is equal to 3 meters.
c. The dog is motionless when its position remains constant. The dog is stationary between 2 and 3 seconds because the graph is flat. The dog is not in any position when it is stopped.
d.
Velocity is defined as the rate at which the position changes over time. If the position increases over time, the velocity is positive, whereas if the position decreases over time, the velocity is negative.
When the position remains constant, the velocity is zero. The graph is flat between 2 and 3 seconds, so the velocity is zero. When the dog is at a position of 1 meter west of the origin at 5 seconds, the dog's velocity is calculated as follows:
Velocity = displacement/time = (-1 m - 0 m) / (5 s - 0 s) = -1/5 m/s.
The dog's velocity at t = 4 s is -1/5 m/s.
To learn about velocity here:
https://brainly.com/question/80295
#SPJ11
How long it takes for the light of a star to reach us if the star is at a distance of 8 x 1010km from Earth.
When a star is at a distance of 8 × 1010 km from Earth, it takes about 4.47 years for the light of that star to reach us.
What is light?
Light is electromagnetic radiation visible to the human eye and responsible for sight. Light is electromagnetic radiation, which means that it is a type of energy that travels in waves. When a light wave travels, it carries energy with it. The speed of light is the highest speed in the universe, and nothing travels faster than it. The distance light travels in one year is called a light-year.
What is a star?
A star is a massive, luminous ball of plasma held together by gravity. Stars are essentially self-luminous, producing light through a process known as nuclear fusion, which is the process of combining atomic nuclei to form heavier nuclei. The vast majority of stars are located within galaxies like the Milky Way, and they are responsible for the formation of m
any of the elements found in the universe.
What is the distance of the star from Earth?8 x 1010 km is the distance of the star from Earth. It takes about 4.47 years for the light of that star to reach us.
Learn more about Earth here,
https://brainly.com/question/15205710
#SPJ11
An AC generator supplies an rms voltage of 115 V at 60.0 Hz. It is connected in series with a 0.200 H inductor, a 4.60 uF capacitor and a 336 2 resistor. What is the impedance of the circuit? What is the rms current through the resistor?
What is the average power dissipated in the circuit?
What is the peak current through the resistor?
What is the peak voltage across the inductor?
What is the peak voltage across the capacitor? The generator frequency is now changed so that the circuit is in resonance. What is that new (resonance) frequency?
The impedance of the circuit is 336.2 ohms. The rms current through the resistor is 0.342 A. The average power dissipated in the circuit is 39.2 W. The peak current through the resistor is 0.484 A. The peak voltage across the inductor is 68.7 V. The peak voltage across the capacitor is 19.6 V. The new resonance frequency is 60.0 Hz.
To find the impedance of the circuit, we need to consider the combined effects of the inductor, capacitor, and resistor. The impedance of an RL circuit is given by Z = [tex]\sqrt{(R^2 + (ωL - 1/(ωC))^2)}[/tex], where R is the resistance, ω is the angular frequency (2πf), L is the inductance, and C is the capacitance. Plugging in the values, we get Z = [tex]\sqrt{(336^2 + (2\pi (60)(0.200) - 1/(2\pi (60)(4.60 x 10^-6)))^2)}[/tex] ≈ 336.2 ohms.
The rms current through the resistor can be calculated using Ohm's law, where I = V/Z, with V being the rms voltage supplied by the generator. So, I = 115 V / 336.2 ohms ≈ 0.342 A.
The average power dissipated in the circuit can be determined using the formula P = I^2R, where P is power and R is the resistance. Thus, P = [tex](0.342 A)^2[/tex] x 336.2 ohms ≈ 39.2 W.
The peak current through the resistor is equal to the rms current multiplied by the square root of 2. Therefore, the peak current is approximately 0.342 A x [tex]\sqrt{2}[/tex] ≈ 0.484 A.
The peak voltage across an inductor is given by V_L = I_LωL, where I_L is the peak current through the inductor. Since the inductor is in series with the resistor, the peak current is the same as the peak current through the resistor. Thus, V_L = 0.484 A x 2π(60)(0.200 H) ≈ 68.7 V.
The peak voltage across a capacitor is given by V_C = I_C/(ωC), where I_C is the peak current through the capacitor. Again, since the capacitor is in series with the resistor, the peak current is the same as the peak current through the resistor. Therefore, V_C = 0.484 A / (2π(60)(4.60 x 10^-6 F)) ≈ 19.6 V.
When the circuit is in resonance, the reactances of the inductor and capacitor cancel each other out, resulting in a purely resistive impedance. At resonance, the angular frequency ω is given by ω = 1/sqrt(LC). Plugging in the values of L and C, we find ω = 1/[tex]\sqrt{0.200 H x 4.60 x 10^-6 F }[/tex]≈ 60.0 Hz, which is the new resonance frequency4
Learn more about capacitor here :
https://brainly.com/question/31375634
#SPJ11