Accumulated Depreciation (10 Points) (Calculated formula) Determine the accumulated depreciation of year 1 for equipment with a value of 11764 and 6 years of life. The residual at the end of the equipment life will be 1479 . Use a simple depreciation method.

Answers

Answer 1

Accumulated Depreciation is the total amount of depreciation expense charged against an asset since it was placed into service. It is used to represent the total amount of value that an asset has lost up to a particular point in time.

The formula to calculate accumulated depreciation of year 1 for equipment with a value of 11764 and 6 years of life is given below: Accumulated Depreciation = (Cost of the Asset - Residual Value) / Estimated Life of the Asset.Accumulated Depreciation = (11764 - 1479) / 6; Accumulated Depreciation = 10285 / 6Accumulated Depreciation = 1714.17 (rounded to two decimal places)

Therefore, the accumulated depreciation of year 1 for equipment with a value of 11764 and 6 years of life using a simple depreciation method is $1714.17.

To learn more about Depreciation, visit here

https://brainly.com/question/30531944

#SPJ11


Related Questions

Skillet Company has two products A and B. A’s CM per unit is higher than that of B. If A’s sales volume relative to B’s sales volume increases (no other changes), then
a. Overall Break-even point for the company will decrease
b. Overall Break-even point for the company will increase
c. Break even point for the company will not change
d. None of the above

Answers

CM (Contribution margin) refers to the per-unit price difference between sales price and variable costs of producing a product or providing a service. This difference contributes towards covering the fixed costs of a company such as rent and salaries.

Skillet Company has two products, A and B. A's CM per unit is higher than that of B. If A's sales volume relative to B's sales volume increases (no other changes), then the correct answer is "a. Overall Break-even point for the company will decrease."Explanation:Overall Break-even point for the company is the number of units the company must produce and sell in order to cover all of its fixed and variable costs. When A's sales volume relative to B's sales volume increases, it means that the company is selling more of product A than product B. Since product A has a higher contribution margin per unit, it means that the overall contribution margin of the company will increase.When the overall contribution margin increases, it means that the company can cover its fixed costs with fewer units sold.

This means that the overall break-even point for the company will decrease. Therefore, the correct answer is a. Overall Break-even point for the company will decrease.

To know more about product visit:

https://brainly.com/question/31815585

#SPJ11

The common mean-variance (MPT) portfolio optimization constraint which states that portfolio weights must sum to no greater than 1 is called the: No short-selling constraint Full investment constraint No leverage constraint That other constraint

Answers

The common mean-variance (MPT) portfolio optimization constraint which states that portfolio weights must sum to no greater than 1 is called the Full investment constraint. So, option b is correct.

The mean-variance portfolio theory (MPT) is a mathematical framework for creating a portfolio of assets that optimize between anticipated returns and expected risks. It's used in finance to assist investors in constructing investment portfolios based on their risk tolerance, investment horizons, and financial objectives.

Portfolio optimization constraint: Full investment constraint is a portfolio optimization constraint that mandates that an investor allocate all of their investment resources into assets that have the greatest expected risk-adjusted return. In essence, this means that investors are barred from keeping cash outside of their portfolios.

When investors aren't allowed to keep cash or borrow cash in order to boost the allocation of their invested capital, this is known as a full investment constraint. So, option b is correct.

To learn more about  mean-variance (MPT) portfolio, here:

https://brainly.com/question/32553095

#SPJ11

Complete question:

The common mean-variance (MPT) portfolio optimization constraint which states that portfolio weights must sum to no greater than 1 is called the:

No short-selling constraint

Full investment constraint

No leverage constraint

That other constraint

SPY:
A. tracks the investment results of an index composed of the total U.S. investment-grade bond market.
B. provides 2x daily leveraged exposure to a market cap-weighted index of 500 large- and mid-cap US companies selected by S&P.
C. tracks the Standard & Poor's (S&P) 500 Index, which comprises 500 large-cap U.S. stocks.
D. bets against the Dow Jones Industrial Average.

Answers

SPY is an exchange-traded fund that tracks the Standard & Poor's (S&P) 500 Index, which comprises 500 large-cap U.S. stocks, making option (C) the correct choice.

SPY is the ticker symbol for SPDR S&P 500 ETF, which is an exchange-traded fund (ETF) that tracks the Standard & Poor's (S&P) 500 Index. The S&P 500 is a benchmark index that is a good reflection of the U.S. stock market's performance overall.

The index comprises 500 of the most significant publicly traded companies in the United States by market capitalization and includes companies in different sectors of the economy. As a result, investing in SPY allows investors to obtain diversified exposure to the U.S. stock market in a single investment. So,  option (C) the correct choice. \

To learn more about stocks, here:

https://brainly.com/question/31940696

#SPJ11

Keys Company has a target of establishing a fund of $50000. If $10000 is deposited at the end of every six months, and the fund earns interest at 4% compounded quarterly, how long will it take to reach the target?

Answers

It will take approximately 5 years for Keys Company to reach its target fund of $50000.

Since $10000 is deposited at the end of every six months, the periodic interest rate is 4%/4=1% and the compound periods are 2*4=8.Using the formula for future value of an ordinary annuity, we have:$50000 = $10000 x [(1+0.01)^8 - 1] / 0.01 x (1+0.01)^8$50000 = $10000 x 10.563$50000/$10000 = 10.563.

Thus, it will take approximately 5 years to reach the target of $50000. Keys Company has a target of establishing a fund of $50000 and is depositing $10000 at the end of every six months. The fund earns interest at 4% compounded quarterly. To find the time it will take to reach the target, we use the formula for future value of an ordinary annuity.

Since the periodic interest rate is 4%/4=1% and the compound periods are 2*4=8, we can calculate:$50000 = $10000 x [(1+0.01)^8 - 1] / 0.01 x (1+0.01)^8$50000 = $10000 x 10.563$50000/$10000 = 10.563Thus, it will take approximately 5 years to reach the target of $50000.

To know more about target visit.

https://brainly.com/question/32264788

#SPJ11

Discuss how a lean start-up like DSC was able to disrupt the shaving market. Using Kim and Mauborgne's new market space framework, what is DSC's unique value proposition?

Answers

Dollar Shave Club (DSC) is a lean start-up that disrupted the shaving market. The company's success can be attributed to its unique value proposition.

DSC identified two key factors that were important to men who shave: cost and convenience. The company then created a razor subscription model that addressed these two factors by offering high-quality razors at an affordable price and delivering them directly to customers' doors. The second step in creating a blue ocean market is to focus on differentiation.

In conclusion, DSC was able to disrupt the shaving market by creating a blue ocean market that was focused on providing high-quality razors at an affordable price and delivering them directly to customers' doors. The company's unique value proposition was built around the blue ocean strategy, which enabled it to create a new market space for itself that was uncontested and free from competition.

To know more about market visit:

https://brainly.com/question/15483550

#SPJ11

The current value of a firm is $674,572 and it is 100% equity financed. The firm is considering restructuring so that it is 13% debt financed. If the firm's corporate tax rate is 20%, the typical personal tax rate of an investor in the firm's stock is 15%, and the typical tax rate for an investor in the firm's debt is 25%, what will be the new value of the firm under the MM theory with corporate taxes but no possibility of bankruptcy? Round the answer to two decimals.

Answers

The new value of the firm would be $659,906.89 based on the calculations using the Modigliani-Miller theory with taxes.

Modigliani-Miller (MM) theory, developed by economists Modigliani and Miller, posits that the value of a company is determined by its operations rather than its capital structure. The theory consists of two main propositions.

The first proposition, assuming no taxes or bankruptcy costs, states that the market value of a company is unaffected by how it finances its operations. In other words, the capital structure (mix of debt and equity) does not impact the overall value of the firm.

The second proposition introduces the influence of taxes, which can have a significant effect on a company's value. It asserts that the market value of a company increases as debt replaces equity. This is because interest payments on debt are tax-deductible, reducing the company's taxable income and consequently increasing its value.

Given the current value of the firm (V) as $674,572, we can calculate the new amount of debt financing that the firm will use. Assuming 13% of the current value of the firm will be financed through debt, the new amount of debt financing is $87,802.36.

To determine the new amount of equity financing, we subtract the debt financing from the current value of the firm: $674,572 - $87,802.36 = $586,769.64.

In the presence of corporate taxes, the tax-adjusted value of the firm is given by Vl = Vu + TcB, where Vl is the value of the levered company, Vu is the value of the unlevered company, Tc is the corporate tax rate, and B is the value of the firm's debt.

To calculate the value of the unlevered company (Vu), we use the formula: Vu = Vl + TcB/(1 - Tc) = $586,769.64 + (0.20 * $87,802.36)/(1 - 0.20) = $643,066.42.

Finally, to find the value of the company under the MM theory with taxes (V), we use the equation: V = Vu + TCB = $643,066.42 + (0.20 * $87,802.36) = $659,906.89.

Therefore, based on the calculations using the Modigliani-Miller theory with taxes, the new value of the firm would be $659,906.89 .

Learn more about taxes

https://brainly.com/question/12611692

#SPJ11

Solving for principal, rate, and time For problems in this unit, if the answer is a percent, express the answer to the nearest hundredth of a percent. 25. Explain how you could modify the simple interest formula I=PRT to get a formula designed to solve for R. For Problems 26-29, find the missing value. 26. 27. 28. 59. 30. You open a checking account. You are paid 4% interest on the average balance but are charged a $7 monthly charge. Assuming that interest is paid monthly (regardless of the number of days in the month), calculate the average daily balance you must maintain to offset the $7 monthly charge. 31. A supplier charges 15% interest on past-due accounts. Interest on an $812 account is $16.35. For how many days must the account have been overdue?

Answers

The answer is , the number of days the account was overdue is approximately 134.

How to find?

In order to modify the simple interest formula

I = PRT to get a formula designed to solve for R, follow the steps given below:

I = PRT.

Divide each side by PT.I/PT = R

To find the formula designed to solve for R, divide I by PT.

Example: If a person wants to borrow $1000 at 8% simple interest for 5 years, find the interest.

I = PRT

Where I is the interest, P is the principal, R is the rate, and T is the time.

I = (1000)(0.08)(5)I

= 400.

The interest is $400.26.

30. If the interest rate is 4%, then the monthly interest rate would be (4%/12) 0.333%.

The monthly charge is $7, and we need to find the average daily balance required to offset that charge.

Let B be the average daily balance.

The interest earned would be (0.333%)(B).Therefore, we can use the following equation: (0.00333)

(B) = $7.

Solve for B:

B = $2102.40.

The average daily balance required to offset the $7 monthly charge is $2102.40.31.

The formula for simple interest is I = PRT. We need to find T.

Let the number of days that the account was overdue be D. Then, the time T would be D/365, as we need the time in years.

I = PRT16.35

= (812)(0.15)(D/365).

Multiplying both sides by 365:5942.75 = 44.28D.

Therefore, the number of days the account was overdue is approximately 134.

To know more on Overdue visit:

https://brainly.com/question/26400140

#SPJ11

Which types of business structure can pay dividends to stockholders when there is a profit? for profit non profit public health all of the above.

Answers

The types of business structure that can pay common stock dividends to stockholders when there is a profit are all of the above.There are different types of business structures that one can opt for to suit their needs.

The structure of a business is one of the most important choices a business owner makes when starting a company implications, influencing how the business operates, how it's taxed, and potentially how much personal liability the owner faces. In a for-profit organization, stockholders are owners and have a share of the business.

It means that when a company makes a profit, the profits may be paid out to the owners as dividends. Non-profit organizations, on the other hand, are not owned by anyone. They are typically set up to accomplish a specific goal or purpose, such as to advance businesses are owned by shareholders who have stock. In addition to receiving dividends when the business is profitable, the shares can be bought and sold on a public stock exchange. As a result, a public company can have thousands or even millions of shareholders. Health care organizations and companies can also be either non-profit or for-profit.

To know more about Common Stock visit:

https://brainly.com/question/21054073

#SPJ11

Which of the four P's of innovation focuses on finding new markets and customers for existing products, such as selling vehicles originally developed for the military to civilian customers commercial markets? Process Product Paradigm Shifts (re) Positioning

Answers

The "paradigm shift" of innovation is related to finding new markets and customers for existing products. Paradigm shift is one of the four P's of innovation that focuses on identifying and exploring new opportunities that may bring new value to the customer.

It is also referred to as "blue ocean" thinking which refers to a new, untapped market. A paradigm shift in innovation involves changing the way people think about things, and to do that, you have to change the way they see things. By changing the way people see things, you can create new markets, new products, and new services.

For example, the automotive industry has been able to identify new markets and customers by selling vehicles that were initially developed for military use to civilian customers commercial markets. In conclusion, a paradigm shift is an excellent strategy for finding new markets and customers for existing products, and it is one of the four P's of innovation that focuses on identifying new opportunities that bring new value to customers.

To know more about innovation visit:

https://brainly.com/question/17516732

#SPJ11

List and describe the sources of risk that may occur in the value chain between producers and customers.

Answers

The value chain includes a series of interconnected activities that businesses undertake to satisfy the demands of customers. These activities include product design, manufacturing, distribution, sales, and marketing, among others.

The value chain involves several risks, including financial, technical, and environmental risks, among others. Let's discuss these risks in more detail:Financial risks: This risk refers to the possibility of loss from adverse fluctuations in financial markets, such as interest rates, exchange rates, and commodity prices. For example, a business that is heavily reliant on oil imports may be at risk of loss if oil prices rise suddenly.

Similarly, a business that relies on debt financing may be at risk of insolvency if interest rates rise suddenly.Technical risks: These risks refer to the possibility of loss from technical failures, such as equipment breakdowns, software malfunctions, and system crashes.

For example, a company that uses cloud-based storage systems may be at risk of data loss if there is a system crash. Similarly, a business that relies on complex manufacturing processes may be at risk of product failure if there are technical failures in the production process.Environmental risks: This risk refers to the possibility of loss from environmental disasters such as pollution, natural disasters, and climate change.

To know more about  interconnected visit:

brainly.com/question/30579807

#SPJ11

Crest Industries sells a single model of satellite radio receivers for use in the home. The radios havethe following price and cost characteristics:Sales price $80.00 per radioVariable costs $32.00 per radioFixed costs $360,000.00 per monthCrest is subject to an income tax rate of 40.00%a. How many receivers must Crest sell every month to break even? (check figure: contribution margin ratio = 60.00%)b. How many receivers must Crest sell to earn a monthly operating profit of $90,000.00 after taxes?

Answers

a. To break even, Crest Industries needs to cover all of its costs, both fixed and variable. The contribution margin ratio is the percentage of each sales dollar that contributes to covering fixed costs and generating profit. It can be calculated as follows:

Contribution margin ratio = (Sales price - Variable costs) / Sales price

In this case, the contribution margin ratio is 60% since the variable costs are $32.00 per radio and the sales price is $80.00 per radio. To determine the break-even point, we can set up the following equation:

Contribution margin ratio * Sales = Fixed costs

0.60 * Sales = $360,000

Solving for Sales:

Sales = $360,000 / 0.60

Sales = $600,000

Therefore, Crest Industries must sell $600,000 worth of radios every month to break even.

b. To calculate the number of receivers Crest Industries must sell to earn a monthly operating profit of $90,000 after taxes, we need to consider the income tax rate. The formula to calculate the required sales can be modified as follows:

(Contribution margin ratio * Sales - Fixed costs) * (1 - Tax rate) = Target profit

(0.60 * Sales - $360,000) * (1 - 0.40) = $90,000

0.60 * Sales - $360,000 = $90,000 / 0.60

0.60 * Sales - $360,000 = $150,000

0.60 * Sales = $510,000

Sales = $510,000 / 0.60

Sales = $850,000

Therefore, Crest Industries must sell $850,000 worth of radios every month to earn a monthly operating profit of $90,000 after taxes.

To break even, Crest Industries needs to sell $600,000 worth of satellite radios per month. However, to achieve a monthly operating profit of $90,000 after taxes, they need to sell $850,000 worth of radios per month. By analyzing the contribution margin ratio and considering the income tax rate, these calculations provide a clear understanding of the sales volume required to reach the desired financial goals.

To know more about sales ,visit:

https://brainly.com/question/25743891

#SPJ11

What is the difference (conceptually) between the short and long run price elasticity of the demand for energy? Why are the measured long run price elasticity of energy bigger than the short run elasticity?.

Answers

The price elasticity of demand for energy measures the responsiveness of quantity demanded to changes in the price of energy. The difference conceptually between the short and long-run price elasticity of demand for energy is that the short-run price elasticity of demand for energy is usually low while the long-run price elasticity of demand for energy is relatively higher.

The long-run elasticity of demand is higher than the short-run elasticity of demand for energy because of a few reasons including: In the long-run, consumers have more time to adjust their energy consumption behavior by purchasing more efficient appliances, insulation, and renewable energy sources, thus they are more responsive to price changes. In the long run, businesses also have more time to adjust their operations and adopt alternative sources of energy and production processes to reduce energy consumption and cost. In contrast, in the short-run, businesses have less time to adjust to changes in energy prices thus the short-run price elasticity of demand for energy is lower. In addition, there is also an effect of the market on the elasticity of demand for energy. If the market is more competitive, consumers and businesses have more alternatives to choose from and will therefore be more responsive to price changes, increasing the price elasticity of demand for energy. On the other hand, in a less competitive market, consumers and businesses have fewer alternatives, hence, the price elasticity of demand for energy will be relatively low.

Learn more https://brainly.com/question/1048608

#SPJ11

Q15: At GE Finance you are the manager of lease finance. You have begun to talk to local companies to try and sell the concept of lease finance for their businesses.
(a) Explain to the companies the nature of lease finance, and distinguish between operating leases, finance leases, sale and lease-back leases, and cross-border leases.
(b) Provide examples of how a business might use each of these forms of lease arrangement.
(c) List and explain the advantages of lease finance to a business.
(d) From the perspective of a lessor, explain the structure of a direct finance lease versus a leveraged finance lease contract.

Answers

Lease finance allows businesses to acquire assets without purchasing them outright, providing advantages such as lower upfront costs and flexibility. The structure of lease contracts can be direct finance leases or leveraged finance leases.

(a) Lease finance is a form of financing that allows businesses to acquire the use of assets without needing to purchase them outright. Operating leases involve renting an asset for a short-term period, while finance leases are long-term leases with the option to purchase the asset. Sale and lease-back leases involve selling an owned asset to a lessor and then leasing it back. Cross-border leases involve leasing assets across different countries.

(b) Examples of lease arrangements:

Operating lease: A company may lease office space for a year to meet temporary expansion needs.

Finance lease: A manufacturing company may lease machinery for several years to support its production process.

Sale and lease-back lease: A retail company may sell its owned store and lease it back to release capital for business expansion.

Cross-border lease: An airline company may lease aircraft from a lessor based in another country to meet its fleet requirements.

(c) Advantages of lease finance to a business:

Lower upfront costs: Leasing requires minimal upfront capital compared to purchasing, preserving cash for other business needs.

Flexibility: Lease terms can be customized to match the business's requirements, allowing for upgrades and equipment replacements.

Tax benefits: Lease payments may be tax-deductible, reducing the overall tax burden.

Off-balance sheet financing: Operating leases may not need to be recorded as liabilities, improving financial ratios and borrowing capacity.

(d) Structure of lease contracts:

Direct finance lease: The lessor provides financing for the asset, and the lessee has a direct contractual relationship with the equipment supplier or manufacturer.

Leveraged finance lease: The lessor secures financing from a third-party lender to acquire the asset, and the lessee has a contractual relationship with the lessor.

Lease finance offers businesses various options for acquiring assets and can provide flexibility, cost advantages, and tax benefits. Understanding the nature of lease arrangements and their advantages helps companies make informed decisions regarding their financing needs. The structure of lease contracts differs depending on whether the lessor directly finances the asset or uses third-party financing.

To know more about assets, visit:

https://brainly.com/question/30764400

#SPJ11

As the financial advisor for Lucy and her family, there are some payments Lucy
wants you to find out. (10 mark)
a. Lucy is looking for mortgages (loan) to finance (buy) a house. The bank has offered
a 30-year fixed mortgage that needs her to pay 6% interest compounded monthly. The
purchase price of the house is $3,000,000, and Lucy plans to make a down payment
equal to $1,000,000. What would her monthly payments be with the bank mortgage?
b. Based on the monthly payments that you calculated above, suppose it is now 10
years later, and Lucy has lived in the house for 10 years. She is considering paying off
the mortgages. How much does she owe on the mortgage if this month's payment was
made yesterday (Hints: she has 20 years left for monthly payments)?

Answers

As Lucy's financial advisor, let's calculate her monthly payments for the bank mortgage. She has a total amount of $1,000,000 to be paid off over the remaining 20 years.

To find her monthly payments, we need to consider the interest rate and the loan term. Without these details, I can provide you with a general formula to calculate monthly payments.

The formula to calculate monthly mortgage payments is:

M = P * (r(1+r)^n)/((1+r)^n-1)

Where:
M = monthly payment
P = principal loan amount
r = monthly interest rate
n = number of monthly payments

Using this formula, we can determine Lucy's monthly mortgage payments. However, I need additional information about the interest rate to provide an accurate answer. Once you provide that information, I'll be able to help you further.

To know more about financial advisor, refer to the link:

https://brainly.com/question/29767702#

#SPJ11

3-WHAT ARE THE MAIN FACTORS OF EFFECTIVE BUSINESS COMUUNICATION? 4-DISCUSS THE MAIN ELEMENTS OF BUSINESS REPORT?

Answers

The main factors of effective business communication are clarity, conciseness, consistency, completeness, and consideration.

Effective business communication is crucial for transmitting information and ideas accurately within an organization and to external stakeholders. Clarity ensures that the message is easily understood by the intended audience, using clear language and explanations. Conciseness involves conveying information succinctly, focusing on key points without unnecessary details. Consistency maintains a uniform tone and style, reinforcing the organization's brand. Completeness ensures all necessary information is included, addressing potential questions or concerns. Consideration involves adapting the communication to the needs and expectations of the audience, demonstrating empathy and understanding.

In the context of business reports, there are several main elements to consider. The introduction sets the context and purpose, outlining the problem or objective being addressed. The executive summaryprovides a concise overview of the entire report, highlighting key findings, conclusions, and recommendations. The methodology explains the research methods and analysis techniques used. The findings present the results, supported by facts and data. The analysis and interpretation section provides a deeper analysis of the findings, identifying trends or implications. The conclusions summarize the main outcomes and tie back to the objectives.

The recommendations suggest specific actions based on the conclusions. Appendices may include additional supporting materials. By following these elements, business reports effectively communicate complex information in a structured and organized manner, aiding decision-making.

To know more about effective business communication visit : brainly.com/question/31041119?

#SPJ11

The Wall Street Journal reports that 1-year T-bills are currently earning 3.48%. You are expecting the annual inflation rate in 2022 to be 8.50%. What is the real risk-free rate (in %) using the Fisher effect approximation?
Round your percentage answers to 2 decimal places. Do NOT enter the percentage (%) sign (e.g., if your result is 1.23%, enter 1.23).
2) The current one-year Treasury bill rate is 3.48% and the expected one-year rate 12 months from now is 4.23%. According to the unbiased expectations theory, what should be the current rate for a two-year Treasury security?
Do not round intermediate calculations. Round your percentage answers to 2 decimal places. Do NOT enter the percentage (%) sign (e.g., if your result is 1.23%, enter 1.23).

Answers

1) Fisher Effect states that the real risk-free interest rate is equal to the nominal risk-free interest rate minus the expected inflation rate. It is given that 1-year T-bills are currently earning 3.48% and the expected annual inflation rate in 2022 to be 8.50%.

Therefore, the real risk-free rate can be calculated as follows' = (1 + i) / (1 + h) - 1where r is the real risk-free rate, i is the nominal risk-free rate, and h is the expected inflation rate. Substituting the values, we gets = (1 + 0.0348) / (1 + 0.0850) - 1r = -0.048 or -4.8%.

Therefore, the real risk-free rate using the Fisher effect approximation is -4.8%.

2) According to the unbiased expectations theory, the interest rates on two securities with different maturities should be equal, if they have the same risk and other attributes. Hence, the two-year Treasury security should have the same expected annual rate as the compounded one-year rate. The compounded one-year rate is given as (1 + 0.0348) (1 + 0.0423) - 1 = 7.23%.

Therefore, the current rate for a two-year Treasury security should be 7.23%.

Learn more about Interest rate

https://brainly.com/question/28272078

#SPJ11

Suppose Japan can manufacture either 200 cars or 100 motorcycles in a year and China can manufacture either 400 cars or 300 motorcycles in a year. If the two countries decide to trade based on comparative advantage we would expect China to: Selected answer will be automatically saved. For keyboard navigation, press up/down arrow keys to select an answer. \begin{tabular}{l|l|} \hline a \\ Japan. \\ \hline \end{tabular} b import both cars and motorcycles from Japan. export motorcycles to Japan and import cars from Japan. d import motorcycles from Japan and export cars to Japan.

Answers

Comparative advantage is a concept used in economics in which a country specializes in producing goods or services for which it has a lower opportunity cost.

Based on comparative advantage, if Japan and China trade with each other, Japan would be expected to export cars, while China would be expected to export motorcycles. So, the answer is Option d) import motorcycles from Japan and export cars to Japan.

The reason why China would be expected to import motorcycles and export cars to Japan is as follows:

Japan China Cars 200 400 Motorcycles 100 300

Japan has an absolute advantage in both car and motorcycle production, since it can produce more of each good than China. However, China has a comparative advantage in motorcycle production, since it has a lower opportunity cost of producing motorcycles than cars. Conversely, Japan has a comparative advantage in car production.

To know more about motorcycles visit:

https://brainly.com/question/32210452

#SPJ11



Share repurchases can be used to produce large-scale changes in
capital structures.
Select one:
True
False

Answers

While share repurchases can have an impact on a company's financial metrics and shareholder value, they do not typically result in large-scale changes in the capital structure. Therefore, statement is False.

Share repurchases, also known as stock buybacks, refer to the process in which a company buys back its own shares from existing shareholders. While share repurchases can have an impact on a company's capital structure, they do not typically result in large-scale changes.

Capital structure refers to the way a company finances its operations through a combination of debt and equity. Share repurchases reduce the number of outstanding shares, which can increase the earnings per share (EPS) and potentially increase the share price. However, this does not fundamentally alter the capital structure of the company.

To produce large-scale changes in capital structures, companies usually undertake actions such as issuing new shares, issuing debt, or making significant acquisitions or divestitures. These actions directly impact the composition and proportion of debt and equity in the capital structure.

While share repurchases can have an impact on a company's financial metrics and shareholder value, they do not typically result in large-scale changes in the capital structure. Other strategic actions are more commonly employed for such purposes.

To know more about Financial Metric, visit

https://brainly.com/question/31441408

#SPJ11

Widmer Company had gross wages of $177,000 during the week ended June 17. The amount of wages subject to social security tax was $159,300, while the amount of wages subject to federal and state unemployment taxes was $22,000. Tax rates are as follows: The total amount withheld from employee wages for federal taxes was $35,400. If an amount box does not require an entry, leave it blank. If required, round answers to two decimal places. a. Journalize the entry to record the payroll for the week of June 17. June

Answers

The journal entry for the payroll for the week of June 17 would be as follows:

Date: June 17
Wage Expense         $177,000
Social Security Payable     $159,300
Federal and State Unemployment Taxes Payable    $22,000
Federal Taxes Payable        $35,400

To journalize the entry to record the payroll for the week of June 17, you will need to record the following transactions:

1. Debit the Wage Expense account for the gross wages of $177,000.
2. Credit the Social Security Payable account for the social security tax withheld from employee wages, which is $159,300.
3. Credit the Federal and State Unemployment Taxes Payable account for the federal and state unemployment taxes, which is $22,000.
4. Credit the Federal Taxes Payable account for the federal taxes withheld from employee wages, which is $35,400.

The journal entry for the payroll for the week of June 17 would be as follows:

Date: June 17
Wage Expense         $177,000
Social Security Payable     $159,300
Federal and State Unemployment Taxes Payable    $22,000
Federal Taxes Payable        $35,400

Know more about journal entry here,

https://brainly.com/question/33438461

#SPJ11

In 2019, the cutput of Auntralia was as follows, consumptione 5800e: investment 59008 government spending $2000. inports: $3006, exports $1008. The CPts are as follows. 2019: 115. 2000: 101. What is real CDP for the year 2019 expressed in terms of 20005 ? ×51301 25113π cisist 2.f1 nor รเ:स

Answers

The real GDP for the year 2019 expressed in terms of 2005 is approximately $10212.34.

To calculate the real GDP for the year 2019 expressed in terms of 2005, we need to use the GDP deflator. The GDP deflator is a measure of the overall price level of goods and services produced in an economy.

The formula to calculate the real GDP using the GDP deflator is:

Real GDP = Nominal GDP / GDP Deflator

First, we need to calculate the Nominal GDP for 2019. The Nominal GDP is the total value of goods and services produced in an economy without adjusting for inflation.

Nominal GDP = Consumption + Investment + Government Spending + (Exports - Imports)

Given the values:

Consumption = $5800
Investment = $5900
Government Spending = $2000
Exports = $1008
Imports = $3006

Nominal GDP = $5800 + $5900 + $2000 + ($1008 - $3006) = $11602

Next, we need to calculate the GDP deflator. The GDP deflator is the ratio of Nominal GDP to Real GDP, expressed as a percentage.

GDP Deflator = (Nominal GDP / Real GDP) * 100

To find the Real GDP, we rearrange the formula:

Real GDP = Nominal GDP / (GDP Deflator / 100)

Given the GDP Deflator for 2019 is 115 and for 2005 is 101:

Real GDP = $11602 / (115 / 101) = $10212.34

Therefore, the real GDP for the year 2019 expressed in terms of 2005 is approximately $10212.34.

Know more about GDP deflator here:

https://brainly.com/question/33117019

#SPJ11

Among paid, owed, earned, and shared media, which is the most credible to customers on social media and why? Give an example from your own or others’ experiences.

Answers

Among paid, owed, earned, and shared media, earned media is the most credible to customers on social media. Earned media refers to the free publicity.

exposure that a brand earns through positive word-of-mouth and mentions on social media platforms. Customers trust earned media more because it is based on authentic opinions and recommendations from real people rather than paid promotions or advertising. For example, if a customer has a positive experience with a brand and shares it on social media, their followers are more likely to trust and be influenced by that recommendation. Similarly, if a brand is mentioned or featured by an influencer or trusted authority in their industry.

it can boost the brand's credibility and reputation among their followers. In contrast, paid media such as sponsored posts or ads can sometimes be perceived as less authentic or trustworthy because they are essentially advertisements that the brand has paid for. Overall, earned media is the most valuable form of media on social media platforms because it reflects genuine customer sentiment and can have a significant impact on a brand's reputation and success.

To know more about publicity visit:

https://brainly.com/question/31562766

#SPJ11

Khalil's teacher has asked him to change the orientation of his images. What does Khalil need to do? O A. O B. O C. O D. Change the shutter speed of his camera. Change the composition of the objects in the pictures. Change the position or direction of the pictures. Change the lighting in the pictures.​

Answers

Answer:

C: change the position or direction of the pictures

Explanation:

I just took the quiz

Prior to recording the following, E. Perry Electronics, Incorporated, had a credit balance of $4,700 in its Allowance for Doubtful Accounts. Required: Prepare journal entries for each transaction. (If no entry is required for a transaction/event, select "No journal entry required" in the first account field.) 1. On August 31, a customer balance for $615 from a prior year was determined to be uncollectible and was written off. View transaction list Journal entry worksheet > On August 31, a customer balance for $615 from a prior year was determined to be uncollectible and was written off. Note: Enter debits before credits. Transaction General Journal Debit Credit Record entry Clear entry View general journal 2. On December 15, the customer balance for $615 written off on August 31 was collected in full. View transaction list Journal entry worksheet A B > Record the reversal of write-off. Note: Enter debits before credits. Transaction Debit 2a. Record entry General Journal Clear entry Credit View general Journal

Answers

Prior to recording the following, E. Perry Electronics, Incorporated, had a credit balance of [tex]$4,700[/tex] in its Allowance for Doubtful Accounts. Required: Prepare journal entries for each transaction. (If no entry is required for a transaction/event, select "No journal entry required" in the first account field.)

On August 31, a customer balance for [tex]$615[/tex]from a prior year was determined to be uncollectible and was written off.In the first step, it is required to record the write-off entry for a customer balance of [tex]$615[/tex], which is from the prior year.

On December 15, the account balance is restored to[tex]$4,700[/tex] with the write-off reversal entry.The journal entry for each transaction are as follows:Transaction General Journal Debit Credit1. Allowance for doubtful accounts[tex]$615[/tex]Accounts receivable $6152. Accounts Receivable $615 Allowance for Doubtful Accounts [tex]$615[/tex]The journal entries are done accordingly, and the account balances have been recorded, as asked in the question.

To know more about credit visit:

https://brainly.com/question/24272208

#SPJ11

J Corp. reported the following: Units: 529 Sales $7403 Variable Costs $512 Fixed Costs $329 If the company reduces its selling price by S8 per unit to generate more sales AND expects the number of units sold to increase by 122 units, what would be the impact to net income? Round ONLY your final answer to 2 decimal places. Do not round intermediate computations. Note decreases as a negative number J Corp. reported the following: Units: 446 Sales $1545 Variable Costs $466 Fixed Costs $421 If the company eliminates sales comissions of $7 per unit by changing to a flat salary increase of $4872 for its sales managers, by what dollar amount would net income change? Round ONLY your final answer to 2 decimal places. Do not round intermediate computations. Note decreases as a negative number

Answers

The impact on net income after reducing the selling price and increasing the units sold would result in a decrease of $44,642,622, while the impact of eliminating sales commissions and changing to a flat salary increase would lead to a decrease of $207,242.

To calculate the impact on net income in both scenarios, we need to compare the original net income with the net income after the changes.

Impact of reducing selling price and increasing units sold:

Original net income can be calculated as follows:

Original Net Income = Sales - Variable Costs - Fixed Costs

Given:

Units: 529

Sales: $7403

Variable Costs: $512

Fixed Costs: $329

Original Net Income = $7403 - $512 - $329 = $6562

After reducing the selling price by $8 per unit and increasing units sold by 122:

New Sales = (529 + 122) * (7403 - 8) = 6511 * 7395 = $48026445

New Variable Costs = (529 + 122) * 512 = 6511 * 512 = $3332032

New Net Income = New Sales - New Variable Costs - Fixed Costs

New Net Income = $48026445 - $3332032 - $329 = $44649184

Impact on Net Income = New Net Income - Original Net Income

Impact on Net Income = $44649184 - $6562 = $44642622 (rounded to 2 decimal places)

Therefore, the impact on net income after reducing the selling price and increasing the units sold would be a decrease of $44,642,622.

Impact of eliminating sales commissions and changing to a flat salary increase:

Original Net Income can be calculated as follows:

Original Net Income = Sales - Variable Costs - Fixed Costs

Given:

Units: 446

Sales: $1545

Variable Costs: $466

Fixed Costs: $421

Original Net Income = $1545 - $466 - $421 = $658

After eliminating sales commissions and changing to a flat salary increase:

New Variable Costs = 446 * 466 = $207836

New Fixed Costs = $421 + $4872 = $5293

New Net Income = Sales - New Variable Costs - New Fixed Costs

New Net Income = $1545 - $207836 - $5293 = -$206584

Impact on Net Income = New Net Income - Original Net Income

Impact on Net Income = -$206584 - $658 = -$207242

Therefore, the impact on net income after eliminating sales commissions and changing to a flat salary increase would be a decrease of $207,242.

To learn more about net income

https://brainly.com/question/28390284

#SPJ11

Karen is shopping at Big Mart. She has with her an umbrella which is the same brand Big Mart carries. When a Big Mart employee, Steve, sees her leave with the umbrella without going through the checkout lane, he asks her to come back into the store. Steve says that he thinks Karen is shoplifting the umbrella. Karen tells him that she has had the umbrella for years and shows him marks of wear and tear. Steve apologizes and tells Karen she is free to go. Can Karen successfully sue for false imprisonment or defamation? From what you have learned about the relationship between a principal and an agent, analyze whether Steve or Big Mart could be liable because of Steve’s actions.

Answers

Karen would not be able to successfully sue for false imprisonment or defamation in this scenario. Here's an analysis of the situation:

1. False Imprisonment: False imprisonment typically involves the intentional and unlawful confinement or restraint of a person without their consent. In this case, Steve did ask Karen to come back into the store, but once Karen explained and showed evidence that she owned the umbrella, Steve apologized and allowed her to leave. Since Karen was not unlawfully confined or restrained against her will, she would not have grounds to sue for false imprisonment.

2. Defamation: Defamation involves making false statements about someone that harm their reputation. In this scenario, Steve accused Karen of shoplifting based on his suspicion. However, once Karen provided evidence that she owned the umbrella, Steve apologized and acknowledged his mistake. The statement made by Steve was not false; it was based on his initial belief. Additionally, defamation requires the false statement to be communicated to a third party, causing harm to the person's reputation. Since Steve's statement was resolved between him and Karen without being communicated to others, defamation does not apply.

Regarding the relationship between a principal (Big Mart) and an agent (Steve), it's important to note that Steve is an employee of Big Mart. The actions of an employee can sometimes create liability for the employer under the legal principle of vicarious liability or respondeat superior.

However, in this case, Steve's actions were not willful or intentional harm towards Karen. He reasonably suspected shoplifting based on the circumstances. Once Karen explained the situation and provided evidence, Steve apologized and rectified the misunderstanding. Therefore, it is unlikely that Big Mart would be held liable for Steve's actions in this particular scenario.

Learn more about False Imprisonment from:

https://brainly.com/question/30115356

#SPJ11

As a marketing company What are:
your key applicable occupational health and safety regulations,
accreditation,
certification, or registration requirements,
industry standards,
and environmental, financial, and product regulations?

Answers

Key applicable occupational health and safety regulations that marketing companies should adhere to include the Occupational Health and Safety Act (OHSA) and the Workplace Safety and Insurance Act (WSIA).

These regulations set out requirements for workplace safety, including equipment and facility maintenance, fire safety, and training and education for employees. Marketing companies may also need to obtain accreditation, certification, or registration to demonstrate their compliance with industry standards. Obtaining certification in these areas can help marketing companies demonstrate their commitment to best practices and continuous improvement. Marketing companies may also need to comply with industry-specific standards, such as the Canadian Marketing Association's Code of Ethics and Standards of Practice. Adherence to these standards can help marketing companies build trust with their customers and ensure their messaging is both legal and ethical. Finally, marketing companies must also be aware of environmental, financial, and product regulations that may apply to their business.

Companies should consult with legal and regulatory experts to ensure they are complying with all relevant regulations and standards. As a marketing company, it is essential to comply with occupational health and safety regulations to ensure the well-being of employees, customers, and the general public.

To know more about Insurance visit:

https://brainly.com/question/989103

#SPJ11

Please read the short case study and answer questions c1
Trans Move is a company providing logistical services for businesses to manage the supply chain. The services they provide include warehouse management, order fulfilment, distribution and shipping orders, and thus cover inbound flow, outbound flow, and return management. On top of transportation of freight, Trans Move also manages the distribution of freight for some clients. In some cases, Trans Move stores and manages a client's products in Trans Move's warehouses and decides when to ship the orders, as long as the order fulfilment meets the client's requirements.
question c1
The manager of Trans Move found that one of the key challenges is effectively managing its operations in the presence of variability. State two key sources of variability faced by Trans Move. For each source of variability, explain how the variability makes Trans Move's operations challenging and discuss ways to reduce the impact of variability.

Answers

The variability of the supply and demand for freight transportation services can lead to poor operational planning, resulting in missed deadlines. The company has to deal with numerous orders and requests from clients daily, resulting in difficulties scheduling pickups and deliveries for shipments.

The two main sources of variability faced by Trans Move are as follows:

Variability in Demand: The demand for logistics services is constantly fluctuating, making it difficult for Trans Move to efficiently manage its operations.  This issue becomes more critical when clients' needs change or when Trans Move's carriers or staffs experience delays or problems. To reduce the impact of variability in demand,

Variability in Transportation: Variability in transportation is another significant source of variability faced by Trans Move. It means that transportation times can fluctuate significantly, from traffic congestion to weather conditions, from a driver's sickness to the availability of equipment.

They can also invest in flexible transportation equipment and vehicles that can be used in different types of weather or terrains.  To reduce the impact of transportation variability, Trans Move can take a proactive approach to prepare for unforeseen incidents.

To know more about transportation visit:

https://brainly.com/question/29851765

#SPJ11

At least one of the answers above is NOT correct. Let f(x)=4−(2x 2
+3x) a. Compute f(3) f(3)= b. Simplify the following expression completely f(x+3) f(x+3)= c. Simplify the following expression completely f(x+3)−f(3). f(x+3)−f(3)= d. Simplify the following expression completely x
f(x+3)−f(3)

. x
f(x+3)−f(3)

= Note: You can earn partial credit on this problem.

Answers

a. The value of f(3) can be calculated by substituting the value of x = 3 in the given function. The calculation is shown below: f(x) = 4 - (2x^2 + 3x)f(3) = 4 - (2(3)^2 + 3(3)) = 4 - (2(9) + 9) = 4 - (18 + 9) = 4 - 27 = -23Therefore, f(3) = -23.

b. The function f(x+3) can be computed by replacing the variable x with (x+3) in the function expression for f(x).f(x) = 4 - (2x^2 + 3x) f(x+3) = 4 - (2(x+3)^2 + 3(x+3))f(x+3) = 4 - (2(x^2 + 6x + 9) + 3x + 9)f(x+3) = 4 - (2x^2 + 12x + 18 + 3x + 9)f(x+3) = 4 - (2x^2 + 15x + 27)Therefore, f(x+3) = -2x^2 + 15x - 23.

c. We can simplify the given expression by using the function expression computed above. f(x+3) - f(3) = (-2x^2 + 15x - 23) - (-23) = -2x^2 + 15xTherefore, f(x+3) - f(3) = -2x^2 + 15x.

d. We can simplify the given expression using the previously computed function expressions. x[f(x+3) - f(3)] = x(-2x^2 + 15x) = -2x^3 + 15x^2Therefore, x[f(x+3) - f(3)] = -2x^3 + 15x^2.

To know more about substituting the value refer here : brainly.com/question/31009321

#SPJ11

At December 31, 2020, Tojosa Corporation reported a deferred tax liability of $240,000 which was attributable to a taxable temporary difference of $800,000. The temporary difference is scheduled to reverse in 2024. In 2021, a new tax law increased the corporate tax rate from 20% to 35%.
How should Tojosa Corporation report this change?
Solution
$ 800,000 X(35%-20%) = 120,000. Tojosa Corporation should record this change by debiting income tax expense for $ 120,000.

Answers

According to the given scenario, Tojosa Corporation reported a deferred tax liability of $240,000 on December 31, 2020, which was related to a taxable temporary difference of $800,000.

The temporary difference is scheduled to reverse in 2024. In 2021, a new tax law increased the corporate tax rate from 20% to 35%.To report the change, Tojosa Corporation should debit income tax expenses for $120,000. The change in the corporate tax rate would result in a higher tax expense for Tojosa Corporation. The calculation of the tax expense increase is as follows:$800,000 × (35% - 20%) = $120,000.

Therefore, Tojosa Corporation should record this change by debiting income tax expenses for $120,000.

To learn more about tax expense, visit here

https://brainly.com/question/31815433

#SPJ11

You will select 2 of the 5 ideas in your Ideas Log to "test" through a research process. Your summary will involve a preliminary market overview of these entrepreneurial solutions, exploring: iCustomers, iCompetitors, i Product/service, i Suppliers, i Business location, and i Industry. Your summary should include research under the subheadings: i) Demographics and segmentation, ii) Target market, iii) Market need, iv) Competition, v) Barriers to entry, and vi) Regulation. In this assessment, a preliminary market overview must include key business aspects under each of the suggested subheadings. Your writing is expected to be clear and well-evidenced with reliable sources. Overall, you will be assessed on how critically you: i Identify and evaluate business ideas, i Consider resourcing for business ideas, i Identify and discuss ethical issues, and social or business responsibility issues, and i Describe how potential investors and team members might be sourced.

Answers

The assessment task requires that you select two entrepreneurial solutions from the five ideas in your Ideas Log to test through a research process.

A preliminary market overview of these entrepreneurial solutions must be explored, covering i Customers, i Competitors, i Product/service, i Suppliers, i Business location, and i Industry.

The research should be done under the subheadings: i) Demographics and segmentation, ii) Target market, iii) Market need, iv) Competition, v) Barriers to entry, and vi) Regulation. Here is how you can conduct the research:

Demographics and Segmentation: This section of the research will provide an overview of the various demographic groups in the market that you intend to serve. It will help you to understand who your potential customers are, their gender, age, income, occupation, etc.

Target Market: In this section, you will define the market segment that you intend to serve and why it is profitable.

Market Need: Here, you will analyze the problem your product or service is solving, how significant it is to the customers, and how it compares with other solutions on the market.

Competition: In this section, you will research your competitors and identify their strengths and weaknesses. You will also analyze how they position themselves in the market.

Barriers to Entry: Here, you will identify the barriers that might make it challenging for you to enter the market and compete effectively.

Regulation: In this section, you will research and analyze the legal requirements for the business, any permits or licenses required, taxes to be paid, etc.

Your summary should be well-evidenced with reliable sources, and you should consider resourcing for business ideas and ethical issues. You must describe how potential investors and team members can be sourced, and your writing should be clear and critical.

To learn more about research, visit:

https://brainly.com/question/14540330

#SPJ11

Other Questions
If the screen was 30 cm behind the fish, what was the distance spanned by the diffraction spot as it moved back and forth? The screen was in the tank with the fish, so that the entire path of the laser was in water and tissue with an index of refraction close to that of water. The properties of the diffraction pattern were thus determined by the wavelength in water. Express your answer with the appropriate units Wet steam is water vapor containing droplets of liquid water. Steam quality defines the fraction of wet steam that is in the vapor phase. To dry steam (i.e., evaporate liquid droplets), wet steam (quality = 0.89) is heated isothermally. The pressure of the wet steam is 4.8 bar and the flow rate of the dried steam is 0.488 m3/s.Determine the temperature (C) at which the isothermal process occurs.Determine the specific enthalpy of the wet steam and the dry steam (kJ/kg).Determine the heat input (kW) required for the drying process. :This activity assesses students' mastery of the structural and stellar components of our Milky Way Galaxy and of learning objective #3: Differentiate the disk, bulge, halo and spiral arms, including their locations, contents, and motions.Answer these two questions:1. In which two regions (Q through W) would you find globular clusters?2. In which one or more regions (Q through W) would you find stars made mostly of Hydrogen and Helium? Learning Goal: To use the principle of work and energy to determine characteristics of a mass being pulled up an incline and determine the power that must be supplied to the system when the efficiency of the input system is considered As shown, a 53 kg crate is pulled up a =40 incline by a pulley and motor system. Initially at rest, the crate is pulled s=4.7 m up along the incline, Undergoing constant acceleration, the crate reaches a speed of 2.5 m/s at the instant it has traveled this distance.(Figure 1) Figure 1 of 1 Considening the coeflicent of konetic finction h=0.13, deternine the power that the motor must supply to the ciate the instant the crate traveis a distance of 4 f in Express your answer to two significant figures and include the appropriate units. Part B - Power supplied to the motor when effictency is considered If the motor has an efficiency of e=0.90, what nower must be supplied to the motor to rase the crale? Express your answer to two significant figures and include the appropriate units. View Avallable Hintis) Part B - Power supplied to the motor when efficiency is considered If the motor has an efficiency of =0.90. What power must be supplied to the motor to raise the crate? Express your answer to two significant figures and include the appropriate units. A company had the following transactions during September, the first month of its operations: - Issued 20,000 shares of common stock in exchange for $400,000. - Purchased equipment for $200,000, using a $100,000 cash down payment and signing a note payable for the balance. - Received $1,000 from customer for services to be performed in November. - Made a $30,000 payment on the note payable from the purchase of the land. - Total monthly sales: Cash sales $50,000 Credit Sales (Acct. Receivable): $18,000 - Purchased supplies on credit for $23,000. - Collected $8,000 from customers on account. - Paid $2,500 for September employee wages. - Received a utility bill for $500 which will be paid next month. What is the balance in the cash occount at the end of September? $344.500 $314,500 $318,500 $326,500 $336,500 Referring to the network below, solve for lo (mA) using the KCL equations for the bottom node. VS Alo 2 10 mA 4 www 9+5 3 kil Referring to network below, what is the value of the voltage (in Volts) across the 3K ohm resistor. 2kQ Vs 4 lo 10 mA 4 kn www.w V ww 3 k To Referring to the network below, what is the value of the Va (in Volts). 2VA 1+VA 4 Vo 8 6 V Write down Challenges and Directions based on the Recent Development for 6G (700 to 800 words, you can add multiple sub-heading here if possible)Needs to be in the range of 700 to 800 words not more not less pls Part (a) Explain the structure of, and power flow in, two-quadrant and four-quadrant three-phase ac drives.Part (b) A three-phase ac motor, with a rotor moment of inertia of 0.0015kg m, is supplied from a voltage source inverter whose dc-link capacitance is 1450F. The dc-link voltage is measured as 500V and the motor is operating at a steady state speed of 4500rpm. Assume there is no braking resistor fitted and there are no losses in the motor and the inverter. Using the energy balance equation, calculate the final dc-link voltage if the machine is to be brought to a standstill (i.e. rotor speed = 0rpm).Part (c) For the system of part b, calculate the new dc-link capacitance required if the final dc-link voltage is to be limited at 550V. Part (d) Comment on the results you have got in parts b and c and explain different solutions that can be used to keep the maximum dc-link voltage of part c (i.e. 550V) without increasing the dc-link capacitance of part b (i.e. to keep the capacitance as 1450F) for the operating conditions given in part b. How did state and national governments function during theAmerican Revolution?describe in detail Explain the concept of physical data independence and its importance in database systems, especially to the Application. In your own words do not cut and paste), and more than one sentence answer. FOR n=2 prove itUse mathematical induction to prove 2+6+18+...+2x3 =3"-1 for n=1,2 (LHR on he neglected, then show tha 4- Which social class do you and your family belong to? Are you in a different or same social class than your grandparents and great-grandparents? Why are you in the class you are? What changed? What stayed the same? Marriages? Acquisition of property? Education? Career changes? Reflect on your familys journey within the classes.5- In your opinion, which group had the easiest time coming to this country? Which group had the hardest time? Why? Which group has made the most socioeconomic gains? Why do you think that group has had more success than others have? Soft Systems Methodology includes which stages?Select one:a.Root definitions of relevant systems are identified.b.The problem situation is expressed.c.Feasible and desirable changes are considered.d.Conceptual models are developed.e.All of the above. As electricity prices continue to soar, we will eventually fill the pinch in our household budget. However, we also have the opportunity to adjust our electricity consumption behaviour over-time. Identify and explain two factors that increases the elasticity of demand for electricity in the long-run. Identify all the information Sue will need in order to define and detail the project. Briefly explain how Sue will be able to get that information Which of the following "motivating factors" behind a breach of ethics is mostlikely to be well intentioned on the part of the employee who commits theunethical act?a. fear of repercussionsb. misguided zealc. short-term stressd. cultivation of personal loyalties 20. In the following diagram, color the structures with the indicated colors Right atrium=yellow Left ventricle-gray Aorta red Left atrium dark green Pulmonary trunk- dark blue Superior vena cava - purple Right ventricle-orange Inferior vena cava - pink Coronary sinus light blue Pulmonary arteries-brown Pulmonary veins- light green QUESTIONS 21-25: On the photo of the thoracic cage, identify the locations of the following cardiac landmarks. Label all the landmarks that you identify 21. Draw a line to show the position of the base of the heart. 22. Draw a line to show the position of the left border of the heart. 23. Draw a line to show the position of the right border of the heart. 24. Draw a line to show the position of the inferior border of the heart. 25. Use an arrow to identify the position of the apex EXERCISE 21 Gross Anatomy of the Heart 393 Let X and Y be two uniformly distributed independent Random Variables, each in the interval (0, R), where R is your CUI Regd. #. Let Z = X + Y = g(X, Y), and W = X - Y = h(X,Y) be the two transformed RVs obtained through linear combination of X and Y RVS respectively. Answer the following questions: a. The joint PDF of the transformed RVs, Z and W b. Their marginal PDFs c. Their conditional PDFs d. Are Z and W independent? Briefly explain e. Are Z and W uncorrelated? Briefly explain f. If answer to part (e) is no, then find their correlation coefficient g. How do the mean and the variance of the RVs Z and W vary with R? h. Compute their Joint MGF and Joint CF in terms of R 1.Which one of the following is NOT a principle ofdesign?ProximityRhythmValueScale2.How do the elements of a design show unity?If the elements of a design work together in harmony After many generations, an insect species evolved resistance to a particular pesticide. This occurred because spraying pesticides