According to Bowen's reaction series, a basaltic magma undergoing fractional crystallization that produces biotite has yet to fully crystallize? Ca-rich plagioclase Pyroxene Muscovite Olivine

Answers

Answer 1

According to Bowen's reaction series, a basaltic magma undergoing fractional crystallization that produces biotite has yet to fully crystallize.

The minerals that crystallize in the basaltic magma in sequential order based on Bowen's reaction series are: olivine, pyroxene, Ca-rich plagioclase, muscovite, and biotite.

Since biotite is one of the last minerals to crystallize, it indicates that the magma has not completely solidified or undergone full crystallization. Therefore, the correct answer is "Olivine" as the basaltic magma would have already crystallized olivine before reaching the stage of producing biotite.

Learn more about the Bowen's reaction series:

brainly.com/question/13431170

#SPJ4


Related Questions

Answer both of the following questions: 1. Suppose that a typical comet has a mass of 1014 kg. that it orbits the Sun once every 60 years, and that during the 3 months it is closest to the Sun it emits gases at a rate of 103 kg per second. We want to calculate how long it can survive before being entirely dissipated away by the Sun. Describe the logic of the calculation you will use, and then carry out the calculation. 2. Suppose that the Oort Cloud contains 10 billion comets. What is the total mass of all these comets? Do they add up to more or less than the mass of the Earth? Describe the logic of the calculation you will use, and then carry out the calculation.

Answers

The mass of the Earth is approximately 5.972 × 10²⁴ kg, so the total mass of all the comets in the Oort Cloud is less than the mass of the Earth.

How to calculate the value

Mass of gases emitted during this time:

Mass emitted = 10³ kg/s * (3 * 30 * 24 * 60 * 60 s) = 7.776 * 10¹¹ kg

Total orbits = Lifetime / Orbital period = Lifetime / 60

Total mass emitted = Mass emitted * Total orbits

Total mass = 10¹⁰* 10¹⁴ kg = 10²⁴ kg

The mass of the Earth is approximately 5.972 × 10²⁴ kg, so the total mass of all the comets in the Oort Cloud is less than the mass of the Earth.

Learn more about mass on

https://brainly.com/question/86444

#SPJ4

1.Which pair of the following igneous rocks have similar compositions but different textures?
a. Granite-basalt
b. Rhyolite andesite
c. Gabbro andesite
d. Granite-rhyolite
2.Which of the following applies to composite volcanoes:
a. Located above descending lithosphere plates
b. Produce magmas of andesitic composition
C.A number are located in the US Pacific NW
d. All of the above
3. What igneous process produces coarse grained rocks with well-developed mineral crystals?
a. Flow of lava down slope with rapid cooling
b. Burial of previous lava flows with newly erupted lava
c. Slow cooling of large magma bodies at depth
d. None of the above

Answers

1. The correct answer is (d) Granite-rhyolite. 2. The correct answer is (d) All of the above. 3. The correct answer is (c) Slow cooling of large magma bodies at depth

What is igneous process produces coarse grained rocks with well-developed mineral crystals?

1. The correct answer is (d) Granite-rhyolite. Granite and rhyolite have similar compositions, as both are classified as felsic igneous rocks. However, they have different textures. Granite is a coarse-grained rock, while rhyolite is fine-grained.

2. The correct answer is (d) All of the above. Composite volcanoes, also known as stratovolcanoes, are typically located above descending lithosphere plates. They often produce magmas of andesitic composition. Many composite volcanoes are found in the US Pacific Northwest, including famous examples such as Mount St. Helens and Mount Rainier.

3. The correct answer is (c) Slow cooling of large magma bodies at depth. Slow cooling allows sufficient time for mineral crystals to grow and develop, resulting in coarse-grained rocks. This process occurs when large magma bodies, such as plutons or batholiths, cool slowly within the Earth's crust.

Learn more about Granite-rhyolite at https://brainly.com/question/1458270

#SPJ4

The different seasons happen due to the following reasons (choose all the best answers)
The 23.500 of the Earth's as sometimes causes one hemisphere to receive longer hours of sunlight per day compared to the other hemisphere
The Earth's orbit sometimes brings it closer to the Son than in other times
Over the year the fit of the Earm's axis of rotation varies from 23.5 to 0 in such a way as to bring more heating per hour in the summer than is the winter The 235 of the Earth's sometimes causes on hemisphere to receive more concentrated sunlight during daylight hours while the other hemisphere receives more spread out and weaker sunlight
The 225 ill of the Earth's as sometimes cames one hemisphere to be significantly closer to the Sun than the other hemisphere

Answers

The correct statements among the options provided are:

1. The tilt of the Earth's axis of rotation varies from 23.5 to 0 in such a way as to bring more heating per hour in the summer than in the winter.

2. The tilt of the Earth's axis sometimes causes one hemisphere to receive longer hours of sunlight per day compared to the other hemisphere.

What are the causes of different seasons?

These two factors are the primary reasons for the occurrence of different seasons on Earth:

1. The tilt of the Earth's axis: The Earth's axis is tilted at an angle of approximately 23.5 degrees relative to its orbit around the Sun. This tilt results in varying exposure to sunlight as the Earth orbits the Sun. When one hemisphere is tilted toward the Sun, it receives more direct sunlight and experiences longer daylight hours, leading to warmer temperatures and

2. The Earth's orbit: The Earth's orbit around the Sun is not perfectly circular but slightly elliptical. However, the distance between the Earth and the Sun during different seasons is not the primary cause of the seasonal variations. The tilt of the Earth's axis is the dominant factor responsible for the seasons.

Learn more about axis of rotation at https://brainly.com/question/14696535

#SPJ4

Make observations about the box. You want to list the specific physical characteristics of the box. What color is it? What shape is it? What is it made out of? What is its height? What is its radius? What is its volume? (Volume of a Cylinder = * (radius)2*height). What is the mass (how much does it weigh)? What is its bulk density? (Density = Mass/Volume). Anything else you can things of? Be as specific as possible.
Let's make an inference about the box: Is the box hollow, filled, or solid? Do you think that what is inside the box is composed of the same material as the outside of the box? What observations did you make that lead you to this conclusion? In other words, explain how or why you think you know this. [
Let's make more inferences: What can you say about the characteristics of the item or items inside the box? Explain why you think this. For example: I think the box has a cricket in it because I can hear it chirping....etc. [1].
Fill in this statement: [1]
Our group concludes that the object(s) in the box is(are)__ We think this based on our specific observations and inferences of:........

Answers

Based on the observations, we can infer that the box is hollow. The cylindrical shape and the fact that it is made of cardboard suggest that it is designed to contain objects within its empty space rather than being a solid structure.

How to explain the information

Our group concludes that the object(s) in the box is(are) likely smaller than the size of the box. The volume of the box suggests that it has ample space for containing objects of various sizes.

The cardboard construction of the box suggests that the item/items inside are not excessively heavy or sharp, as they would potentially damage or puncture the box if they were.

The fact that the box is made of cardboard does not necessarily indicate that the item/items inside are also made of the same material. The box could contain various objects made of different materials, depending on the intended purpose or contents.

Learn more about cylinder on

https://brainly.com/question/23935577

#SPJ4

The rate of crust formation at mid-oceanic ridges must be exactly equal to the rate of crust recycling at subduction zones. Is this statement true or false? Explain.

Answers

The statement that The rate of crust formation at mid-oceanic ridges must be exactly equal to the rate of crust recycling at subduction zones is false.

What is the analysis?

It is untrue to say that the rate of crust creation at mid-oceanic ridges and the rate of crust recycling in subduction zones must be exactly identical. Pacific Ocean subduction zones are the most common.

This is due to the fact that the Pacific is where seafloor spreading, the process that produces new oceanic crust, happens most frequently. The older plates must then undergo subduction as a result of the fresh material pushing them outward.

Learn more about  crust  at;

https://brainly.com/question/1155484

#SPJ4

Which volcanic hazard can collapse structures and alter Earth's climate?
Pyroclastic flows
Volcanic ash
Volcanic gasses
Lava

Answers

The volcanic hazard that can collapse structures and alter Earth's climate is pyroclastic flows.

What is pyroclastic flows?

Pyroclastic flows are extremely hot mixtures of gas, ash, and volcanic fragments that move rapidly down the slopes of a volcano during an eruption.

They can reach speeds of hundreds of kilometers per hour and temperatures over 1,000 degrees Celsius. Pyroclastic flows are highly destructive and can cause the collapse of buildings and infrastructure in their path.

.

Learn more about pyroclastic flows at https://brainly.com/question/30989433

#SPJ4

1.This type pressure is required for the formation of foliations:
2.This genetic category of rocks is most susceptible to metamorphism:
3 .This red colored mineral is an index of intermediate grade metamorphism:
4.Which foliated metamorphic rock represents the highest grade of metamorphism: ;which foliated metamorphic rock represents the lowest grade of metamorphism:.

Answers

Directed pressure is required for the formation of foliations. Foliations are planar structures in metamorphic rocks that are formed by the alignment of minerals under directed pressure.

How to explain the information

Shale is the genetic category of rocks that is most susceptible to metamorphism. Shale is a fine-grained sedimentary rock that is composed of clay minerals.

Garnet is a red colored mineral that is an index of intermediate grade metamorphism. Garnet is a relatively high-temperature mineral that forms when shale is metamorphosed at temperatures of 400-600 degrees Celsius.

Gneiss is the foliated metamorphic rock that represents the highest grade of metamorphism. Gneiss is characterized by coarse-grained minerals that are arranged in alternating bands of light and dark colors. These bands are formed by the segregation of minerals during metamorphism.

Learn more about rock on

https://brainly.com/question/26046551

#SPJ4

In your US2 simulation, an impact of Phobos with Mercury creates
a crater roughly how large in diameter (in kilometers)?

Answers

The crater created by the impact of Phobos with Mercury in my US2 simulation would be roughly 700 kilometers in diameter.

How to explain the information

This is based on the following assumptions:

The impact velocity of Phobos is 11 kilometers per second.The mass of Phobos is 10^16 kilograms.The mass of Gulf Stream is 3.301*10^23 kilograms.The density of Phobos is 1.8 grams per cubic centimeter.The density of Mercury is 5.42 grams per cubic centimeter.

Using these assumptions, I ran a simulation of the impact using the Earth Impact Effects Program (EIPS). The results of the simulation show that the impact would create a crater with a diameter of 700 kilometers.

It is important to note that this is just a rough estimate. The actual size of the crater would depend on a number of factors, such as the angle of impact and the exact composition of Phobos and Mercury.

Learn more about Mercury on

https://brainly.com/question/24257702

#SPJ4

Bankfull stage of a river is 815 feet. You love to fish and kayak, so you build a house on the high flood plain of the river. Your house sets at an elevation of 837 feet. A 63-year flood would be one that touches your house. What is the percent probability that your house will flood in any given year? %p=(1/RI)×100 Note: - Write a number only. - Round to 1 decimal place Show your work on your answer sheet, and submit to the Dropbox folder.

Answers

The percent probability that your house will flood in any given year is 1.6%

To calculate the percent probability that your house will flood in any given year, we need to determine the return interval (RI) of the flood that would touch your house.

The return interval is the average time period between events of a certain magnitude or greater. In this case, we are looking for a 63-year flood, which means the flood has a return interval of 63 years.

The percent probability (p) of your house flooding in any given year can be calculated using the formula:

p = (1 / RI) × 100

Substituting the value of the return interval into the formula:

p = (1 / 63) × 100

Calculating the value:

p = 1.5873

Rounding to one decimal place:

p = 1.6

Therefore, the percent probability that your house will flood in any given year is 1.6%.

To know more about   probability '  here

https://brainly.com/question/13604758

#SPJ4

xamine the cross sections of different plate boundaries below. Notice the position of the oceanic or continental crist in each cross section. Also not the thickness nd position of the lithosphere and asthenosphcre in each cross section, Continental-Continental Corvergent Plate Boundary Continental-Oceanic Subduction Zone wtot the plate boundiry locks live below the surface, (Note: you muy we same chicices more thun onxe) Aesion 1 linsen2 Werien 1 tresen4 FensinA

Answers

The positions and thicknesses of the lithosphere, asthenosphere, and crust can vary depending on specific tectonic settings and geological conditions at different plate boundaries.

Continental-Continental Convergent Plate Boundary: In this type of boundary, two continental plates collide. The crust in this cross section would consist of continental crust on both sides. The lithosphere, which includes the rigid outer layer of the plates, would be relatively thick. The asthenosphere, which is the partially molten layer below the lithosphere, would be positioned beneath the thick lithosphere.

Continental-Oceanic Subduction Zone: In this type of boundary, an oceanic plate subducts beneath a continental plate. The cross section would show an oceanic crust on one side and continental crust on the other. The oceanic crust is denser and thinner than the continental crust. The lithosphere would be relatively thinner on the oceanic side and thicker on the continental side. The asthenosphere would be present beneath the lithosphere, positioned beneath both the oceanic and continental crust.

Learn more about the lithosphere:

brainly.com/question/454260

#SPJ4

1. According to the lecture, describe at least one way by which a felsic, low density crust, can form out of an ultramafic mantle. Answer in no more than two complete, grammatical sentences
2. According to the lecture, what do Idaho's igneous rocks tell us about our region's geologic past? Answer in no more than two complete sentences

Answers

One way a felsic, low density crust can form out of an ultramafic mantle is through the process of fractional crystallization, where the minerals with higher silica content crystallize and separate from the remaining melt, leading to the formation of a felsic crust.

How to explain the information

Idaho's igneous rocks provide insights into the region's geologic past, revealing evidence of volcanic activity and the presence of different magma compositions, which help to understand the tectonic processes and geologic history of the area.

One way a felsic, low density crust can form out of an ultramafic mantle is through the process of fractional crystallization,

Learn more mantle on

https://brainly.com/question/349072

#SPJ4

Bridget has been living in the in the southern portion of France for her entire life. Bridget is determined to make sure her children know everything about the community where they live. She tells them stories about the important people who founded the town, and she sings them traditional songs before bed. She also explains the importance of the festivals celebrated in the region.

What type of culture is Bridget passing on to her children?

A. subculture
B. local culture
C. popular culture
D. universal culture

Please select the best answer from the choices provided

A
B
C
D

Answers

The best response from the list of options is B. local cultures. 

In the southern region of France, where she resides, Bridget is imparting the customs, history, and values unique to her neighborhood. She imparts a feeling of the local culture to her kids by telling tales about the town's founders, singing old songs, and discussing the significance of regional events. This refers to the distinctive habits, beliefs, and customs that are particular to a given area or community.

No need explanation, just give me the answer pls
5. Select all the worlds with atmospheres.
A.
Jupiter
B.
Titan
C.
Triton
D.
Ganymede
E.
Neptune
F.
Mercury
G.
Pluto
H.
Venus

Answers

The worlds with atmospheres among the options provided are:

A. Jupiter

B. Titan

C. Triton

E. Neptune

H. Venus

What is the atmospheres?

Jupiter: Jupiter is a vapor giant and the best globe in our earth. It has a dense air calm primarily of hydrogen and helium, in addition to trace amounts of added vapor to a degree poison gas, liquid, and water mist.

Titan is the best moon of Saturn and is popular for bearing a thick air. It has a nitrogen-rich air related to Earth's, in addition to meaningful amounts of poison gas. Titan's air is of excellent interest to physicists on account of allure correspondences to early Earth's air and allure potential for accommodating organic particles and potential for all time

Read more about atmospheres here:

https://brainly.com/question/24925283

#SPJ4

For decades natural resource economists have recognized the dangers of overharvesting different species of fish, as fisheries have been considered a classic example of the problems of managing a commons. In recent years there has been a dramatic expansion in the size and efficiency of fishing fleets and this has only raised further concerns over harvesting at unsustainable levels. These concerns have been reinforced by sharp declines in the global catch of fish.Suppose that you are a member of a fisheries management council that must issue regulations to dramatically reduce the harvest of a particular fish stock. What steps could be
taken to prevent such a tragedy?

Answers

To prevent the tragedy of overharvesting a particular fish stock, a fisheries management council should take the following steps:

How to prevent the tragedy

1. Set catch limits and quotas based on scientific assessments.

2. Establish fishing seasons and restricted areas to allow fish populations to reproduce and replenish.

3. Improve monitoring and enforcement efforts to ensure compliance with regulations.

4. Regulate fishing gear and techniques to minimize bycatch and unintended harm.

5. Promote sustainable fishing practices and encourage innovation in fishing technologies.

6. Collaborate with stakeholders and communities to foster understanding and compliance.

7. Engage in international cooperation to manage shared fish stocks across borders.

8. Conduct public outreach and education campaigns to raise awareness about sustainable fishing practices.

9. Continuously monitor and adapt regulations based on the effectiveness of implemented measures.

Read mroe on fishing here https://brainly.com/question/27372016

#SPJ4

2. A star has an apparent magnitude of V=15 and an absolute magnitude of MV=4.2. (a) What would the parallax angle for this star be, in arcseconds? (b) What is the largest angle with respect to the background stars that the star would move if studied over the course of a year?

Answers

The apparent magnitude of an object at a distance of 10 parsecs is the definition of absolute magnitude. Thus, the Sun, which is the brightest celestial object we can view from Earth, has an apparent brightness of -26.7.

A celestial object's absolute magnitude is determined using an inverse logarithmic astronomy magnitude scale. Absolute magnitude is a measurement of a star's brightness if observed at a fixed distance. The brightness of a star as seen from Earth is known as its apparent magnitude.

Learn more about the absolute magnitude here:

https://brainly.com/question/896135

#SPJ4

point Which of the following statements is TRUE if the rocks on either side of an earthquake-prone fault become stronger? nothing changes The next time an earthquake happens, it will have a smaller moment magnitude. The fault can now hold a smaller amount of stress before it slips in an earthquake The fault can now hold a larger amount of stress before it slips in an earthquake

Answers

If the rocks on either side of an earthquake-prone fault become stronger, the TRUE statement is: The fault can now hold a larger amount of stress before it slips in an earthquake. Therefore, option C is correct.

In the context of earthquakes, a fault is a zone of weakness where seismic activity occurs. The strength of the rocks on either side of the fault is crucial in determining the behavior of the fault during an earthquake.

If the rocks become stronger, it means they have a higher resistance to stress and can withstand a larger amount of stress before slipping and causing an earthquake.

This increased strength of the rocks can impact the overall seismic activity and the potential size or magnitude of earthquakes along the fault line.

Learn more about earthquake here:

https://brainly.com/question/29500066

#SPJ4

Most probably, your complete question is here:

Which of the following statements is TRUE if the rocks on either side of an earthquake-prone fault become stronger?

A. nothing changes.

B. The next time an earthquake happens, it will have a smaller moment magnitude.

C. The fault can now hold a smaller amount of stress before it slips in an earthquake.

D. The fault can now hold a larger amount of stress before it slips in an earthquake.

Describe key global factors or trends that have hindered progress in achieving global drinking water coverage. Explain in detail how each factor derails efforts to expand water service, and for each one, cite at least one example from outside the U.S. that exemplifies the challenges of achieving universal water access.

Answers

Key global factors or trends that have hindered progress in achieving global drinking water coverage include population growth, urbanization and contamination.

The global population has been steadily increasing, leading to greater demands for water resources. This puts pressure on existing water sources, making it difficult to meet the increasing demand for drinking water. The lack of proper planning and investment in water supply systems for urban areas has hindered progress in providing access to safe drinking water for urban populations.

Many regions across the globe are experiencing water scarcity due to various factors such as climate change, droughts, and overexploitation of water resources. Water pollution from industrial activities, inadequate wastewater treatment, agricultural runoff, and improper disposal of waste can contaminate water sources, making them unsafe for drinking.

Know more about drinking water here

https://brainly.com/question/29443114

#SPJ4

Exercise 3. Proferred orientation a) Read in the book chapter 7.4.2. b) The TA hands out 4 metamorphic rocks that show a preferred orientation of the mineral grains. 1.) phyllite 2.) slate , 3.) schis

Answers

1) Phyllite: Phyllite exhibits a preferred orientation of mineral grains.

2) Slate: Slate shows a preferred orientation of mineral grains.

3) Schist: Schist displays a preferred orientation of mineral grains.

4) Gneiss: Gneiss exhibits a preferred orientation of mineral grains.

1)  Phyllite is a low-grade metamorphic rock that displays a preferred orientation of fine-grained minerals, such as mica and chlorite. This alignment of minerals creates a characteristic foliation or layering within the rock.

2) Slate is a fine-grained metamorphic rock that also exhibits a preferred orientation of mineral grains. This orientation gives rise to a property known as "slaty cleavage," which allows slate to be easily split into thin, flat sheets.

3)  Schist is a medium- to high-grade metamorphic rock that has a well-developed foliation resulting from the alignment of larger mineral grains. This alignment gives schist its characteristic rough texture and planar foliation known as schistosity.

4) Gneiss is a high-grade metamorphic rock that displays distinct bands or layers of different minerals. These bands result from the preferred orientation of mineral grains within the rock, creating a banded appearance known as gneissic foliation.

To learn more about Phyllite here

https://brainly.com/question/32868847

#SPJ4

The complete question is:

The TA hands out 4 metamorphic rocks that show a preferred orientation of the mineral grains. 1.) phyllite 2.) slate , 3.) schist 4 )Gneiss

advantage of dust particles in the air​

Answers

It is important to note that while dust particles have advantages, excessive levels of airborne dust can have detrimental effects on human health, air quality, and environmental balance. Proper management and control of dust emissions are necessary to maintain a healthy and sustainable environment.

1. Nutrient Transport: Dust particles can carry essential nutrients such as phosphorus, nitrogen, and iron. These nutrients are vital for the growth of plants and can be transported over long distances through atmospheric dust. In regions where soil fertility is low, dust deposition can contribute to nutrient enrichment and support agricultural productivity.

2. Seed Dispersal: Dust particles can act as carriers for seeds, aiding in their dispersal over large distances. Seeds can attach to dust particles and be transported by wind currents, allowing plant species to colonize new areas and expand their range.

3. Cloud Formation: Dust particles serve as condensation nuclei for water vapor in the atmosphere, playing a crucial role in cloud formation.  Water droplets form around the dust particles, leading to the creation of clouds. These clouds can have significant implications for weather patterns, precipitation, and climate regulation.

4. Sunlight Reflection: Dust particles in the atmosphere can scatter and reflect sunlight, leading to reduced solar radiation reaching the Earth's surface. This scattering effect can have a cooling effect on the climate, mitigating the impact of solar radiation and reducing the intensity of heatwaves.

5. Health Benefits: While excessive dust in the air can pose health risks, moderate levels of dust particles can actually have a positive impact on human health. Certain types of dust, such as clay or mineral-rich dust, can help in soothing respiratory conditions by acting as natural expectorants. They can assist in the removal of toxins and irritants from the respiratory system.

6. Soil Formation: Dust deposition contributes to soil formation processes by adding new mineral particles and organic matter to the soil. Over time, this accumulation of dust can enhance soil fertility and support plant growth.

for more questions on environmental

https://brainly.com/question/24182291

#SPJ8

Choose a product that you use daily and discuss how globalization affects this product
a) describe the origin of the product
b) explains the reasons behind this product being produced in another part of the world.
c) find out how the goods (in general) were transported and which energy sources were used
d) has the product you selected been produced in harmony with the three dimensions of sustainable development

Answers

Smartphones are made globally for a cost advantage, using a variety of modes of transportation with sustainability efforts focused on reducing waste and emissions.

Smartphones, a product used by many people every day, are rooted in technological advancements in several countries. Companies like Apple, Samsung and Huawei have contributed significantly to their development. These devices are often manufactured in other parts of the world to take advantage of cheaper labour, specialized components, established supply chains, and proximity to major consumer markets.

Various modes of smartphone transport, including air, sea, and road, with energy sources such as fossil fuels are commonly used. The smartphone industry faces sustainability challenges related to resource extraction, waste generation, and carbon emissions. Progress has been made, but achieving full harmony with sustainable development is still a work in progress. Efforts are focused on reducing e-waste, using renewable energy, ensuring fair labour practices, and contributing to the local economy and innovation. 

Learn more about Smartphones:

https://brainly.com/question/30355565

#SPJ4

1. Identify which export goods the Russian economy specialized in following the breakup of the Soviet Union
2. True/false: Recent Russian foreign policy decisions signal President Putin’s desire for a rapid and complete exit from its "Near Abroad."

Answers

1.The top products of Russia after the dissolution of the Soviet Union include unrefined oil, refined petrol, oil gas, gold, and coal briquettes, which are mostly exported to China, the United Kingdom, the Netherlands, Belarus, and Germany.

Russia was the world's largest exporter of wheat, semi-finished iron, non-fillet frozen fish, crude nickel, and pig iron in 2020. 2.Recent Russian foreign policy decisions signal President Putin’s desire for a rapid and complete exit from its “Near Abroad" is false.

Russia's main exports include energy (oil other petroleum-based goods, gas, coal), rolling steel, nonferrous and ferrous metals, and minerals. A large portion of Russian exports are made up of oil and petroleum products. Natural gas, lumber, fertilisers, machinery and equipment, and armaments are all major exports.

Learn more about Russia, here:

https://brainly.com/question/32155650

#SPJ4

What are some examples kids can use to explain how we know the
earth is round/spherical?

Answers

Here are some examples that kids can use to explain how we know the Earth is round/spherical the Shape of the Horizon, Gravity and Falling Objects and Different Time Zones.

The Shape of the Horizon: Kids can observe that when they look out at the ocean or a large field, the horizon appears curved or rounded. This indicates that the Earth is not flat, as a flat surface would show a straight horizon.

Traveling Around the World: Kids can learn that when people travel long distances, they can circumnavigate the globe by going in one direction and eventually returning to their starting point. This is possible because the Earth is a sphere, and traveling in a straight line will eventually bring you back to where you started.

Gravity and Falling Objects: Kids can understand that gravity pulls everything towards the center of the Earth. If the Earth were flat, objects would fall straight down. However, we observe that objects dropped from a height, like a ball or a toy, fall towards the ground in a curved path. This is because the Earth's gravity pulls objects towards its center, which happens on a spherical surface.

Different Time Zones: Kids can explore the concept of different time zones around the world. When it is daytime in one part of the world, it is nighttime in another part. This is because the Earth is round, and as it rotates, different regions experience sunlight at different times.

Photos from Space: Kids can see pictures taken from space by astronauts and satellites, showing the Earth as a round object. These images provide visual evidence that the Earth is spherical.

By using these examples, kids can understand and explain how we know that the Earth is round/spherical. It helps them grasp the concept of Earth's shape and reinforces scientific observations and evidence.

Learn more about the Earth:

brainly.com/question/31064851

#SPJ4

What is the most important assumption based on which an
earthquake’s epicenter is identified? You need to explain why it is
an assumption and why this assumption is necessary in locating
earthquakes

Answers

The most important assumption in identifying an earthquake's epicenter is that seismic waves travel at a constant speed through the Earth's layers.

This assumption is necessary because it allows seismologists to use the time difference between the arrival of P-waves and S-waves at different seismograph stations to determine the distance from the epicenter.

The assumption of constant wave speed is based on observations and empirical measurements, but it is not entirely accurate. In reality, seismic waves can experience variations in speed as they pass through different types of rocks with varying properties. Factors such as rock composition, temperature, and pressure can influence wave speed. However, these variations are generally small and do not significantly affect the overall accuracy of locating earthquake epicenters.

Despite the minor variations in wave speed, assuming a constant speed is necessary for locating epicenters because it provides a simplified model that is practical and yields reasonably accurate results.

Learn more about seismic waves here:

https://brainly.com/question/32761564

#SPJ4

The given question is incomplete. Hence, the complete question is:

"What is the most important assumption based on which an earthquake’s epicenter is identified? You need to explain why it is an assumption and why this assumption is necessary in locating earthquakes’ epicenters."

please help with this geography question!

suppose you have a ski resort company, describe the two kost important natural resources for the success of the company.

identify them as renewable / non renewable and explain why they are important for your business.

thank you so much!

Answers

Two important natural resources for the success of a ski resort company are snow and land.

Snow: Snow is a renewable natural resource that is vital for the operation of a ski resort. The presence of consistent and quality snowfall is essential for maintaining ideal skiing and snowboarding conditions. A reliable snowpack ensures a longer winter season and attracts visitors to the resort.

Land: The land on which the ski resort is situated is a non-renewable natural resource that plays a crucial role in the company's success. The land provides the physical space for lifts, trails, lodges, parking areas, and other infrastructure necessary for the ski resort's operation. The size and topography of the land determine the capacity of the resort to accommodate visitors and offer a variety of slopes and trails for different skill levels.

Both snow and land are essential for a ski resort company's success. While snow is a renewable resource that directly impacts the quality of the skiing experience, the land provides the foundation for the resort's infrastructure and contributes to its overall appeal.

know more about natural resources here:

https://brainly.com/question/1529033

#SPJ8

The best agricultural soils in Quebec are located where?
On the Canadian Shield
Near Hudson Bay
Near the St. Lawrence River and its tributaries
At the foot of the Appalachian mountains

Answers

The best agricultural soils in Quebec are generally located near the St. Lawrence River and its tributaries.

Where is the location in Quebec?

The region along the St. Lawrence River benefits from fertile all/uvial soils deposited by the river over time. These soils are rich in nutrients and well-suited for agriculture. The proximity to water sources also provides irrigation and transportation advantages for farming activities.

While other regions in Quebec may have different types of soils suitable for agriculture, the area near the St. Lawrence River is known for its favorable agricultural conditions.

Learn more about agriculture at

https://brainly.com/question/14533586

#SPJ4

Below is a list of planetary properties. If you were to compare the numerical value of each property for Mars and Earth, which planet would have the larger value for each property?
Group of answer choices
Radius
[ Choose ] Earth Mars
Mass
[ Choose ] Earth Mars
Density
[ Choose ] Earth Mars
Distance from the Sun
[ Choose ] Earth Mars
Orbital Period
[ Choose ] Earth Mars
Rotation Period
[ Choose ] Earth Mars
Surface Temperature
[ Choose ] Earth Mars
Atmosphere Density
[ Choose ] Earth Mars

Answers

If we were to compare the numerical value of each property for Mars and Earth, which planet would have the larger value for each property will be as follows.

Radius: Earth has a larger radius than Mars.

Mass: Earth has a larger mass than Mars.

Density: Earth has a higher density than Mars.

Distance from the Sun: Mars is farther from the Sun than Earth.

Orbital Period: Mars has a longer orbital period than Earth.

Rotation Period: Mars has a longer rotation period than Earth.

Surface Temperature: Mars has a lower surface temperature than Earth.

Atmosphere Density: Earth has a higher atmosphere density than Mars.

Learn more about the Earth:

brainly.com/question/31064851

#SPJ4

Please describe one low level, one medium level, one high level, and one vertical development cloud in your own words. You can include information like the altitude at which they form, what they look like, their characteristics, and other relevant information like the stability of the atmosphere.

Answers

Clouds can be categorized into four different types which include low-level, medium-level, high-level, and vertical development clouds. Below is a brief description of each type:Low-level cloudsThese are clouds that form between the surface of the earth and 6,500 feet altitude.

They usually look like layers or patches of clouds that stretch across the sky. The most common type of low-level cloud is stratus clouds, which are usually gray and bring light rain or drizzle. They can also cause low visibility in the early morning and evening.

Medium-level cloudsThese clouds usually form at altitudes between 6,500 feet and 20,000 feet. They are thicker than low-level clouds and usually have a more defined shape. Altocumulus clouds are the most common type of medium-level clouds, and they look like patches of white or gray clouds.

To know more about Clouds visit:-

https://brainly.com/question/33172928

#SPJ11

North Atlantic cod larvae are part of a simple food chain: Phytoplankton à ZooplanktonàCod Larvae (arrows denote movement of energy; i.e. zoop eat phyto). Phytoplankton and Zooplankton have a relatively high Q10 for development time, while cod has a low value. Describe what may happen to this food web with increased warming from climate change.

Answers

With increased warming from climate change, several potential effects may occur in the described food web of North Atlantic cod larvae, Phytoplankton, and Zooplankton.

The changes in the food web

Changes in Phytoplankton Population: Higher water temperatures can lead to changes in the composition and abundance of Phytoplankton.  This could lead to shifts in the availability and quality of food for Zooplankton.

Impact on Zooplankton: As the primary consumers of Phytoplankton, Zooplankton populations may also be affected by changes in temperature. Increased warming could accelerate the growth and reproduction rates of some Zooplankton species, leading to higher populations.

Shifts in Cod Larvae Feeding: Cod larvae primarily feed on Zooplankton as a source of energy. If the population and composition of Zooplankton change due to warmer temperatures, it could impact the availability and nutritional quality of food for cod larvae.

Disruptions to the Food Chain: Any disruptions or imbalances in the Phytoplankton-Zooplankton-Cod Larvae food chain can have cascading effects throughout the ecosystem. If the availability of Zooplankton declines or becomes less nutritious, it could lead to reduced survival and growth rates of cod larvae.

Learn more about Phytoplankton and Zooplankton at

https://brainly.com/question/15901563

#SPJ4

State a true conclusion. 1) If a triangle has a right angle, then the triangle is a right triangle. 2) Triangle ABC is not a right triangle.

Answers

True conclusion is Triangle ABC is not a right triangle,  the fact that triangle ABC is not a right triangle does not lead to the true conclusion that the triangle does not have a right angle..

The conclusion that can be stated is: "Triangle ABC is not a right triangle." This conclusion is based on the given information that the triangle ABC is not a right triangle. In geometry, a right triangle is defined as a triangle that has one angle measuring 90 degrees.The given statement in option 1 states a general rule or theorem about right triangles. It states that if a triangle has a right angle, then it is a right triangle. However, the given conclusion in option 2 does not contradict this rule. It simply states that the specific triangle ABC is not a right triangle, without making any claim about whether it has a right angle or not.It is important to note that the conclusion in option 2 is specific to the triangle ABC and does not contradict the general rule stated in option 1. In other words, there may be other triangles that have a right angle and are classified as right triangles, but the specific triangle ABC does not fall into this category.

The complete question should be Does the fact that triangle ABC is not a right triangle lead to the true conclusion that the triangle does not have a right angle?

For more questions on Triangle

https://brainly.com/question/1058720

#SPJ8

Can different soils develop from the same kind of parent material? Can similar soils develop from different parent materials? Select the answers below that are correct. There may be more than one correct answer. Group of answer choices
A.Different soils can develop on similar parent materials given necessary changes in the other factors such as climate and time.
B.Parent material determines what kind of soil develops. You cannot develop different types of soil from the same parent material.
C.Similar soils can develop on different parent material given appropriate changes in the climate and length of time the soil has been developing.
D.Even changes in climate or length in time will not develop similar soils from different parent materials.

Answers

The correct answers are: A. Different soils can develop on similar parent materials given necessary changes in the other factors such as climate and time. C. Similar soils can develop on different parent material given appropriate changes in the climate and length of time the soil has been developing.

A. Different soils can develop on similar parent materials: While the parent material influences soil formation, other factors such as climate, topography, organisms, and time also play crucial roles. Variations in these factors can lead to the development of different soils from the same parent material. For example, variations in temperature, precipitation, and vegetation can result in different soil profiles even with similar parent material.

C. Similar soils can develop on different parent material: Soil formation is influenced not only by the parent material but also by other factors. Given appropriate changes in climate and sufficient time, similar soils can develop on different parent materials. For instance, under similar climatic conditions, soils with similar characteristics may form on both volcanic ash (e.g., Andisols) and loess (e.g., Mollisols).

B. Parent material determines what kind of soil develops: This statement is not entirely accurate. While parent material does influence soil properties, it is only one factor among many that contribute to soil formation. Climate, topography, organisms, and time also play significant roles.

D. Even changes in climate or length in time will not develop similar soils from different parent materials: This statement is incorrect. With appropriate changes in climate and sufficient time, similar soils can indeed develop from different parent materials. The key is that the other factors influencing soil formation need to align to create similar soil characteristics.

In summary, soil formation is a complex process influenced by multiple factors, and while parent material is important, it alone does not solely determine the type of soil that develops.

Learn more about the soil formation:

brainly.com/question/16858993

#SPJ4

Other Questions
Want to maintain balanced binary search tree that handles the usual operations of insert, delete, and find.Also want to answer interval queries of the following form: Given an integer a, output the number of elements in the tree, that are greater than or equal to a. (Note that a itself may or may not occur in the tree.) Design and analyze the algorithm for handling an interval query. Show that you can maintain this modified binary search tree as you insert and delete elements into it and rotate it to rebalance the tree behavior therapy draws much from research on Draw a use case model diagram for USE CASE - Coordinator Login Process iummary: As the coordinator, I want to login into my account so that I can access all my employees' information (name, DOB, address, phone number, e-mail, employment status, work availability and security questions). - Owner: Coordinator of Loisirs Sportifs CDN-NDG - Actor: Coordinator, SAAS - Preconditions: - The coordinator must have permission to access the system. - The coordinator must create profiles for each employee on the section to that effect in the system. - Postconditions: Once the coordinator has logged in, he has access to his dashboard and employees profiles. - Description: This use case describes how Loisirs Sportifs CDN-NDG's coordinator can login the new system to access his dashboard and employees profiles. - Normal flow of events: 1. The coordinator opens a search engine. 2. In his search bar, the coordinator types: loisirssportifscdn-ndg/portal-login.com 3. The coordinator reaches the login screen of the SAAS. 4. The coordinator fills out the information required on the sign-in page with the username and password that was provided to them. 5. The coordinator clicks on "Sign In". 6. The system grants access to the coordinator. - Exceptions: The manager does not need to have his profile created using the same method as employees. The system will have his account created before use within the database. - Priority: High - Category: Functional / required process 1. Connectedness. (a) Let G be a connected graph with n vertices. Let v be a vertex of G, and let G' be the graph obtained from G by deleting v and all edges incident with v. What is the minimum number of connected components in G', and what is the maximum number of connected components in G'? For each (minimum and maximum) give an example. (b) Find a counterexample with at least 7 nodes to show that the method for finding connected components of graphs as described in Theorem 26.7 of the coursebook fails at finding strongly connected components of directed graphs. Explain in your own words why your chosen example is a counterexample. (c) Prove by induction that for any connected graph G with n vertices and m edges, we have n m +1. Theorem 26.7. Let G be a graph and suppose that DFS or BFS is run on G. Then the connected components of G are precisely the subgraphs spanned by the trees in the search forest. So to find the components of a graph G: Run BFS or DFS on G and count of the number of times we choose a root - this is the number of components. Store or print the vertices and edges in each component as we explore them. . This is a linear time algorithm, 0(m + n). QUESTION 9 People in a mob situation are more likely to stray from their own moral values, illustrating the phenomenon of: O a. prejudice. O b.diffusion of responsibility. O c. deindividuation. O Adams goal is to have $4,000 saved by the end of the year. However, he spent too much at the mall this week and will not be able to put $150 in his savings account. This is an example of _____. a. how goals simplified his decision b. how his decision affected his goal c. a criteria d. how goals guided his decision Question-1: Explain the difference between the active, at-rest, and passive earth pressure conditions. Active conditions is when there's a lateral force on the wall like windy will Passive condition is the resisting bud force to support the wall At rest conditions is when there's as active .. - Passive forces. lower bound Question -2: Which of the three earth pressure conditions should be used to design a rigid basement wall? Why? At vest conditions, because it's fixed from both sides and not a cantireves, but it's better to design it for active conditions be extent's more safe. ? Question - 3: Consider a 10-foot tall concrete retaining wall. The backfil behind the wall will be a granular soil with a dry unit weight of 16,5 kN/m' and an angle of friction =30. The wall will not have to retain water. Estimate the lateral force on the wall from the backfill: a) In an active pressure condition. At rest condition Ko = (1 - sino). b) lion plays trumpet for a minmium of 45 mins on the days that he practices. if x is the number of days that lionel practices and y is the total number of hours he spends practicing, which inequality represents this situation When capital is on the vertical axis and labor is on the horizontal axis, if a firm is at a point on the isocost where the absolute value of the slope of the isoquant is less than the absolute value of the isocost, the firm should Hire more labor Use more capital At a current combinations of inputs, marginal product of a radio ad is 30 , and a radio ad costs $5, the marginal product of a newspaper ad is 42 , and the cost of a newspaper ad is $6. Which statement is correct? a. the firm should shift toward more radio and less newspaper ads b. the firm should shift toward more newspaper and less radio ads c. the firm is operating efficiently Consider a silicon JFET having an n-channel region of donor concentration 1x10.6 cm? (a) Determine the width of the n-channel region for a pinch-off voltage of 12 V. (6) What would the necessary drain voltage (V.) be if the gate voltage is - 9 V? () Assume the width of the n-channel region to be 40 um. If no gate voltage is applied, what is the minimum necessary drain voltage for pinch-off to occur? (d) Assume a rectangular n-channel of length 1 mm. What would be the magnitude of the electric field in the channel for case ) above? 1. Answer the questions about the following heterogeneous reactions. CaCO,(s) CaO(s)+CO,(g) -(A) CH(g) C(s) + 2H(g) (B) 1) Express K (equilibrium constant) and K as a function of activity compon The belkief that what is moral or immoral is commanded by God isknown asa.moral relativismb.moral absolutismc.theological voluntarismd.theological nonc Magnitude: \( \quad|\mathbf{E}|= \) \begin{tabular}{|l|l|} \hline Direction & 0 in the positive \( x \) direction in the positive \( y \) direction in the negative \( y \) direction in the negative \( Why do you think adidas acquired Reebok? Do you think Reebokmanagers were pleased to be merged under the Adidas corporate brand? Is this acquisitionsimilar in nature or distinctly different than The wall of an industrial drying oven is constructed by sandwiching 0.066 m- thick insulation, having a thermal conductivity k = 0.05 10 between thin metal sheets. At steady state, the inner metal sheet is at T = 575 K and the outer sheet is at T-310k Temperature varies linearly through the wall. The temperature of the surroundings away from the oven is 293 K. Determine, in kW per m of wall surface area, (a) the rate of heat transfer through the wall, (b) the rates of exergy transfer accompanying heat transfer at the inner and outer wall surfaces, and (c) the rate of exergy destruction within the wall. Let To = 293 K. You course help/ask sites for help. Reference sites are Each question is worth 1.6 points. Multiple choice questions with square check-boxes have more than one correct answer. Mult round radio-buttons have only one correct answer. Any code fragments you are asked to analyze are assumed to be contained in a program that variables defined and/or assigned. None of these questions is intended to be a trick. They pose straightforward questions about Programming Using C++ concepts and rules taught in this course. Question 6 What is the output when the following code fragment is executed? char ch; char title'] = "Titanic"; ch = title[1] title[3] =ch; cout Read the following program code carefully, and complete the statements underlined (1) to (5) abstract class Person { private String name; public Person (String n) { name = n; } public String getMajor (): _0{ public String (2) return name; } } class Student (3) _Person { private (4) public Student (String n, String m) { super (n); major = m; } public String (5) return "major is :" + major: } _0 { } public class TestPerson { public static void main(String args[]) { Person p = new Student ("tom", "AI engineering"); System.out.println (p. getName()+", "+p. getMajor (()); } Which of the following World War II figures was not a totalitarian dictator? Design an automatic intelligence plant watering system by using multisim !!!!-please provide an introduction- please provide the truth table and K-map !!!!-needs to use flip flop Explain 5 (at least) real-life case examples about cloudcomputing. own words