A yellow line occurs at 572.8 nm in the emission spectrum of phosphorus. What amount of energy, in joules, must be released by an electron in a phosphorus atom to produce a photon of this light?

Answer:

1.44 x 10²⁵ ions of Na⁺

Explanation:

Given parameters:

Mass of NaCl  = 1.4kg  = 1400g

Unknown:

Number of ions of sodium  = ?

Solution:

The compound NaCl in ionic form can be written as;

      NaCl →  Na⁺ + Cl⁻

In 1 mole of NaCl we have 1 mole of sodium ions

 Now, let us find the number of moles in NaCl;

  Number of moles  = [tex]\frac{mass}{molar mass}[/tex]  

    Molar mass of NaCl  = 23 + 35.5 = 58.5g/mol

Number of moles  =  [tex]\frac{1400}{58.5}[/tex]     = 23.93mol

 So;

   Since 1 mole of NaCl gives 1 mole of Na⁺  

    In 23.93 mole of NaCl will give 23.93 mole of Na⁺

1 mole of a substance  = 6.02 x 10²³ ions of a substance

  23.93 mole of a substance  =  6.02 x 10²³ x  23.93

                                                   = 1.44 x 10²⁵ ions of Na⁺

Answer:

1 a

Explanation:

Answer:

The chemical formula is NaClO and consists of one atom of sodium (Na), one atom of chlorine (Cl) and one atom of oxygen (O).

Molecular Weight/ Molar Mass: 74.44 g/mol

Density: 1.11 g/cm³

Explanation:

Answer:

Okay

Explanation:

Answer:

Where are what located no picks no pdf so what?

Answer:

Percent yield = 17%

Explanation:

Given data:

Actual yield of lithium chloride = 6.0 g

Theoretical yield of lithium chloride = 35.4 g

Percent yield = ?

Solution:

Formula:

Percent yield = (actual yield / theoretical yield )× 100

Now we will put the values in formula.

Percent yield = (6.0 g/ 35.4 g)× 100

Percent yield = 0.17 × 100

Percent yield = 17%

Answer:

Cu3 (PO4)2 contains a total of 2 atoms of phosphorus in just one molecule. (2.10 mol)(6.02214 x 10^23 atoms / mol)(2 phosphorous) = 2.53 x 10^24 atoms of phosphorous per molecule of copper i

Explanation:

Answer    1 mole = 6.02 × 1023 atoms

0.25 moles × (6.02 × 1023) = 1.5 × 1023 atoms Carbon

for the first one

Answer:

Ksp = 3.24 x 10⁻⁴

Explanation:

The dissociation equilibrium for a generic salt AB is:

AB(s) ⇄ A⁺(aq) + B⁻(aq)

              s            s

For instance, the expression for the Ksp constant is:

Ksp = [A⁺] [B⁻] = s x s = s²

According to the problem, 0.0180 mol of the salt is soluble in 1.00 L os water. That means that the solubility of the salt (s) is equal to 0.0180 mol per liter.

s = moles of solute/L of solution = 0.0180 mol/L

Thus, we calculate Ksp from the s value as follows:

Ksp = s² = (0.0180)² = 3.24 x 10⁻⁴

Answer:

Pumps also called transporters, are transmembrane proteins that actively move ions and/or solutes against a concentration or electrochemical gradient across biological membranes.

Answer:

the second one

Explanation:because its higher

Answer:

CH3CH2CH2Ch2Ch2Ch3

Explanation:

That's the answer

Answer:

2 mol H₂O

Explanation:

With the reaction,

1.55 moles of O₂ would react completely with ( 2*1.55 ) 3.1 moles of H₂. There are not as many moles of H₂, thus H₂ is the limiting reactant.

Now we calculate the moles of H₂O produced, starting from the moles of limiting reactant:

The number of moles of H₂O that could be produced in the reaction is 2.00 moles

From the question,

We are to determine the number of moles of H₂O that could be produced.

The given balanced chemical equation is

2 H₂(g) + O₂(g) → 2 H₂O(g)

This means,

2 moles of H₂(g) reacts with 1 mole of O₂(g) to produce 2 moles of H₂O

From the given information

Number of moles of H₂ present = 2.00 moles

and

Number of moles of O₂ present = 1.55 moles

Since,

2 moles of H₂(g) reacts with 1 mole of O₂(g) to produce 2 moles of H₂O

Then,

The 2.00 moles of H₂(g) will react with 1.00 mole of O₂(g) to produce 2.00 moles of H₂O

∴ 2.00 moles of H₂O will be produced during the reaction

(NOTE: Only 1.00 mole of the O₂(g) will react, meaning O₂(g) is the excess reactant)

Hence, the number of moles of H₂O that could be produced in the reaction is 2.00 moles

Learn more here: https://brainly.com/question/1553639

Mass of Cyclohexen : 10.2 g

Reaction

3 C6H10 + 4 Na2Cr2O7 + 16 H2SO4 >

3 C6H10O4 + 4 Cr2(SO4)3 + 4Na2SO4 + 16 H2O

mol C6H10 : mol C6H10O4 = 3 : 3 = 1 : 1

[tex]\tt \%yield=\dfrac{actual}{theoretical}\times 100\%\\\\68.6\%=\dfrac{12.5}{theoretical}\times 100\%\\\\theoretical=18.22~g[/tex]

12.5 grams of C6H10O4 , mol C6H10O4 (MW 146.14 g/mol):

[tex]\tt \dfrac{18.22}{148}=0.123[/tex]

mol C6H10 = mol C6H10O4 = 0.124

mass C6H10 :

[tex]\tt 0.124\times 82.16=10.2~g[/tex]

Answer:

The Universe is constantly expanding and as it expands the stars and objects in space move farther apart, just like the points on the balloon when air is blown into it. Density and distribution of "stars" as the balloon expands because when volume increases the density will increase.

Hope this Helps

Answer:

0.00883 mol

Explanation:

Let's consider the reduction reaction of gallium.

Ga³⁺(aq) + 3 e⁻ ⇒ Ga(s)

We can establish the following relationships:

The amount of Ga deposited using a current of 0.710 A that flows for 60.0 min is:

[tex]60.0min \times \frac{60s}{1min} \times \frac{0.710C}{s} \times \frac{1mole^{-} }{96486C} \times \frac{1molGa}{3mole^{-}} = 0.00883 molGa[/tex]

Answer:

96.72 m/min

Explanation:

The following data were obtained from the question:

Time (t) = 56.7 s

Distance (d) = 100 yard

Rate (R) =?

Next, we shall convert 56.7 s to minutes. This can be obtained as follow:

60 s = 1 min

Therefore,

56.7 s = 56.7 s × 1 min /60 s

56.7 s = 0.945 min

Next, we shall convert 100 yard to metre (m). This can be obtained as follow:

1 yard = 0.914 m

Therefore,

100 yard = 100 yard × 0.914 m /1 yard

100 yard = 91.4 m

Finally, we shall determine the rate of the swimmer as follow:

Time (t) = 0.945 min

Distance (d) = 91.4 m

Rate (R) =?

R = d/t

R = 91.4/0.945

R = 96.72 m/min

Thus the rate of the swimmer is 96.72 m/min

A definition is an explanation of a word or a term for clarity.

The term definition has to do with the correct explanation of a term or word.

The following are the appropriate definitions of the words;

Learn more about definition:https://brainly.com/question/14217480?

#SPJ1

1. Heretic: A heretic is a person who disagrees with an accepted belief. For example, during the Middle Ages, individuals who questioned or challenged the teachings of the Catholic Church were often labeled as heretics.

2. Influence: Influence refers to the ability to have an effect on someone or something. It can be the power to shape someone's opinions, decisions, or behavior. For instance, parents, teachers, and friends can have a significant influence on a person's choices and actions.

3. Technology: Technology refers to the practical application of knowledge, tools, and crafts. It involves using scientific and engineering principles to create new devices, processes, or systems that enhance human life. Examples of technology include smartphones, computers, and medical equipment.

4. Skepticism: Skepticism is an attitude of doubt or a belief that knowledge is not certain. Skeptics question claims, ideas, or beliefs and seek evidence or logical reasoning to support them. For instance, a person who is skeptical of conspiracy theories would ask for concrete evidence before accepting such claims as true.

5. Habit: A habit is a usual behavior, attitude, or quality that is acquired through repetition and becomes automatic. It is often formed by consistently performing a specific action. For example, brushing teeth before bed can become a habit through repetition and eventually be done without conscious thought.

Sorry that was a lot to read (lol)

Solution properties are the properties of a solution that don't depend on the type of solute but only on the concentration of the solute.  

Solutions from volatile substances have a higher boiling point and lower freezing points than the solvent  

For freezing point can be formulated

[tex]\tt \Delta T_f=K_f.m[/tex]  

K = molal freezing point constant  

m = molal solution  

A solution with a freezing point of -5.8 ∘C

[tex]\tt \Delta T_f=T_f~solvent-T_f~solution=0-(-5.8)=5.8[/tex]

[tex]\tt mass~of~glucose:\\\\\Delta T_f=K_f.m\\\\5.8=1.86^oC/m.\times \dfrac{mol~glucose}{12}\\\\mol~glucose=\dfrac{5.8\times 12}{1.86}=37.42[/tex]

[tex]\tt mass=mol\times MW=37.42\times 180=6735.6~g=6.7356~kg[/tex]

Answer: The crust and the upper layer of the mantle together make up a zone of rigid, brittle rock called the Lithosphere . The layer below the rigid lithosphere is a zone of asphalt-like consistancy called the Asthenosphere . The asthenosphere is the part of the mantle that flows and moves the plates of the Earth.

Explanation:

Spectrographs are useful to astronomers as they  help in studying the composition of a star as each component absorbs light at specific wavelengths.

It is defined as a graph which depicts the spectral information about the component. Spectrographs consisting of lines  are  called atomic spectra as the lines represent wavelengths which are radiated from atoms when electrons jump or make a transition from one energy level to another.

Band spectra is given to a group of lines spectrum which are so close that they appear like a band . They are produced by molecules when they radiate their vibrational or rotational energies.

Amount of light which is absorbed is unique for each element and hence astronomers can measure  the position of lines  to determine which elements are present in the target.

Learn more about spectrographs,here:

https://brainly.com/question/13961959

#SPJ2

Answer:

metallic bond

because this diagram is electron gas theory which shows metallic bond

Answer:

Here are some adjectives for ice: para-elemental, kinder thin, thick continental, invisibly transparent, dirty, rock-hard, immense and almost innumerable, thin, flawless, horizontal and pelting, nearly horizontal and pelting, more pelting, beautifully numbing, pure compact, new catastrophic, dirty brash, largely foamy, ...

Explanation:

Answer:

4 calcium ions and 4 sulfide ions.

Explanation:

In a face centered unit cell, 8 corners of the unit cell are occupied by 8 atoms. Each corner is 1/8 of a cell. In addition it has 6 atoms in the face of the lattice, which is 1/2 of a cell. (1/8 * 8) + (1/2 * 6) = 4. CaS has a 1:1 ratio. Therefore, they each have 4 ions.

Each cubic unit cell contains FOUR (4) calcium ions in octahedral holes and FOUR (4) sulfide ions at the lattice points.

In conclusion, each cubic unit cell contains FOUR (4) calcium ions in octahedral holes and FOUR (4) sulfide ions at the lattice points.

Learn more in:

https://brainly.com/question/5248441

Answer:

answer is c

Explanation: cause there breaking it

Answer:

The answer is

Explanation:

The new pressure can be found by using the formula for Boyle's law which is

[tex]P_1V_1 = P_2V_2[/tex]

Since we are finding the new pressure

[tex]P_2 = \frac{P_1V_1}{V_2} \\[/tex]

404.6 kPa = 404600 Pa

From the question we have

[tex]P_2 = \frac{404600 \times 12}{43} = \frac{4855200}{43} \\ = 112911.6279... \\ = 112912[/tex]

We have the final answer as

Hope this helps you

Answer:

0.007756M KHP; 0.0009695 moles NaOH reacts; 0.03488M NaOH.

Explanation:

Potassium hydrogen phthalate, KHP, is a salt used as standard to determine concentration of basic solutions as NaOH solutions.

To find molarity of the KHP solution we need to convert mass of KHP to moles and divide this in 125mL = 0.125L:

Moles KHP -Molar mass: 204.22g/mol-:

0.198g * (1mol / 204.22g) = 0.0009695 moles KHP

Molarity:

0.0009695 moles KHP / 0.125L = 0.007756M KHP

NaOH reacts with KHP as follows:

NaOH + KHP → Na⁺ + KP⁻ + H₂O

That means 1 mole of NaOH reacts per mole of KHP, that means moles of NaOH that reacts are = Moles of KHP added:

0.0009695 moles NaOH reacts

In 27.80mL = 0.02780L the NaOH was contained. Molarity is:

0.0009695 moles NaOH / 0.02780L =

0.03488M NaOH

Moles of NaOH added will be "0.034".

According to the question,

→ [tex]Molarity = \frac{Number \ of \ moles}{Volume}[/tex]

By substituting the values, we get

                  [tex]= \frac{0.198}{204}\times \frac{1000}{125}[/tex]

                  [tex]= 0.0077 \ M[/tex]

Let,

Now,

→            [tex]M_1 V_1 = M_2 V_2[/tex]

→ [tex]0.0077\times 125=M_2\times 27.8[/tex]

→                [tex]M_2 = 0.034 \ moles[/tex]

Thus the above answer is appropriate.

Learn more:

https://brainly.com/question/23931328

Answer:

A chemical reaction is the process in which atoms present in the starting substances rearrange to give new chemical combinations present in the substances formed by the reaction. These starting substances of a chemical reaction are called the reactants, and the new substances that result are called the products.

Number of atoms in 1.4 mol of Phosphorus trifluoride (PF₃) : 8.428 x 10²³

The mole is the number of particles(molecules, atoms, ions) contained in a substance  

1 mol = 6.02.10²³ particles

Can be formulated

N=n x No

N = number of particles

n = mol

No = Avogadro's = 6.02.10²³

1.4 mol of Phosphorus trifluoride (PF₃), number of atoms :

[tex]\tt N=1.4\times 6.02\times 10^{23}\\\\N=8.428\times 10^{23}[/tex]

Answer:

P₂ = 607 mmHg

Explanation:

Given data:

Initial volume = 4.5 L

Final volume = 5.6 L

Initial pressure = 756 mmHg

Final pressure = ?

Solution:

The given problem will be solved through the Boyle's law,

"The volume of given amount of gas is inversely proportional to its pressure by keeping the temperature and number of moles constant"

Mathematical expression:

P₁V₁ = P₂V₂

P₁ = Initial pressure

V₁ = initial volume

P₂ = final pressure

V₂ = final volume  

Now we will put the values in formula,

P₁V₁ = P₂V₂

756 mmHg × 4.5 L = P₂ × 5.6 L

P₂ = 3402 mmHg. L/5.6 L

P₂ = 607 mmHg