Electrical energy is used to perform work or provide power for various electrical appliances and devices. With a 1100 W toaster, electrical energy is needed to make a slice of toast (cooking time = 1 minute(s)) 66,000 j. At 7 cents/kWh , this cost 7 cents.
a)
To calculate the electrical energy needed, the formula is:
Energy (in joules) = Power (in watts) x Time (in seconds)
First, we need to convert the cooking time from minutes to seconds:
Cooking time = 1 minute = 60 seconds
Now we can calculate the energy:
Energy = 1100 W x 60 s = 66,000 joules
Therefore, it takes 66,000 joules of electrical energy to make a slice of toast.
b)
To calculate the cost, we need to convert the energy from joules to kilowatt-hours (kWh). The conversion factor is:
1 kWh = 3,600,000 joules
So, the energy in kilowatt-hours is:
Energy (in kWh) = Energy (in joules) / 3,600,000
Energy (in kWh) = 66,000 joules / 3,600,000 = 0.01833 kWh (rounded to 5 decimal places)
Now we can calculate the cost:
Cost = Energy (in kWh) x Cost per kWh
Cost = 0.01833 kWh x 7 cents/kWh = 0.128 cents (rounded to 3 decimal places)
Therefore, it costs approximately 0.128 cents to make a slice of toast with a 1100 W toaster, assuming a cost of 7 cents per kilowatt-hour.
To learn more about electrical energy: https://brainly.com/question/29395271
#SPJ11
ball is thrown horizontally from a 17 m-high building with a speed of 9.0 m/s. How far from the base of the building does the ball hit the ground?
When a ball is thrown horizontally from a 17 m-high building with a speed of 9.0 m/s, it will hit the ground approximately 4.3 meters away from the base of the building.
When the ball is thrown horizontally, its initial vertical velocity is 0 m/s since there is no vertical component to the throw. The only force acting on the ball in the vertical direction is gravity, which causes it to accelerate downward at a rate of 9.8 m/s². Since the initial vertical velocity is 0, the time it takes for the ball to reach the ground can be calculated using the equation d = 0.5 * a * t², where d is the vertical distance traveled, a is the acceleration due to gravity, and t is the time. In this case, the vertical distance traveled is 17 meters. Rearranging the equation to solve for time, we get t = sqrt(2d/a). Substituting the values, we find t = sqrt(2 * 17 / 9.8) ≈ 2.15 seconds. Since the horizontal velocity remains constant throughout the motion, the distance the ball travels horizontally can be calculated using the equation d = v * t, where v is the horizontal velocity and t is the time. Substituting the values, we get d = 9.0 * 2.15 ≈ 19.4 meters. Therefore, the ball hits the ground approximately 4.3 meters away from the base of the building.
Learn more about free fall:
https://brainly.com/question/13796105
#SPJ11
Which One Is The Most Simplified Version Of This Boolean Expression ? Y = (A' B' + A B)' A. Y = B'A' + AB B. Y = AB' + BA' C. Y = B'+ A D. Y = B' + AB
which one is the most simplified version of this Boolean expression ?
Y = (A' B' + A B)'
A. Y = B'A' + AB
B. Y = AB' + BA'
C. Y = B'+ A
D. Y = B' + AB
The most simplified version of the Boolean expression Y = (A' B' + A B)' is: Y = A + B + A'
The correct answer is: C.
To simplify the Boolean expression Y = (A' B' + A B)', we can use De Morgan's theorem and Boolean algebra rules.
Let's simplify step by step:
Distribute the complement (') inside the parentheses:
Y = (A' B')' + (A B)'
Apply De Morgan's theorem to each term inside the parentheses:
Y = (A + B) + (A' + B')
Simplify the expression by removing the redundant terms:
Y = A + B + A'
The most simplified version of the Boolean expression Y = (A' B' + A B)' is:
Y = A + B + A'
Therefore, the correct answer is:
C. Y = A + B + A'
To know more about Boolean expression, here
brainly.com/question/29025171
#SPJ4
A standing wave is produced by two identical sinusoidal waves traveling in opposite directions in a taut string. The two waves are given by: y 1
=(0.02 m)sin(5x−10t)
Ay 2
=(0.02 m)sin(5x+10t)
where x and y are in meters, t is in seconds, and the argument of the sine is in radians. Find i. amplitude of the simple harmonic motion of the element on the string located at x=10 cm ii. positions of the nodes and antinodes in the string. iii. maximum and minimum y values of the simple harmonic motion of a string element located at any antinode.
Therefore, the maximum and minimum y values of the simple harmonic motion of a string element located at any antinode are 0.04 m and 0 m respectively.
i. The amplitude of the simple harmonic motion of the element on the string located at x=10 cm. The displacement of the string from its equilibrium position at point x and time t is given by;y(x,t)=y1+y2(0.02m)sin(5x−10t)+0.02m sin(5x+10t)At x=10cm; x=0.1m;y(0.1,t) =0.02sin(5(0.1)−10t)+0.02sin(5(0.1)+10t)=0.04sin(10t) Amplitude of the simple harmonic motion at x=10cm is 0.04 mii. Positions of the nodes and antinodes in the string: The equation of a standing wave of the form y= 2Asin(kx)sin(ωt)for nodes y=0⇒sin(kx)=0⇒kx=nπ⇒x=nπk for antinodes y=±2A⇒sin(kx)=±1⇒kx=(2n−1)π2⇒x=(2n−1)π2kwhere n is any integer, n = 1, 2, 3, …At n=1, λ/2= 1 node 1 (n=1) = (1/2)(1) = 0.5 m node 2 (n=2) = (1/2)(3) = 1.5 m node 3 (n=3) = (1/2)(5) = 2.5 m …At n=1, λ/4= 1 antinode 1 (n=1) = (1/4)(1) = 0.25 m antinode 2 (n=2) = (1/4)(3) = 0.75 m antinode 3 (n=3) = (1/4)(5) = 1.25 m …iii. Maximum and minimum y values of the simple harmonic motion of a string element located at any antinode At any antinode, kx=(2n−1)π2sin(kx)=±1sin[(2n−1)π/2]=±1The displacement of the string from its equilibrium position at point x and time t is given byy(x,t)=y1+y2(0.02m)sin(5x−10t)+0.02m sin(5x+10t)Maximum displacement, y max=y1+y2=0.04mMinimum displacement, y min=y1−y2=0 m (because y2>y1). Therefore, the maximum and minimum y values of the simple harmonic motion of a string element located at any antinode are 0.04 m and 0 m respectively.
To know more about Adjacent antinodes visit:
https://brainly.com/question/14088834
#SPJ11
Determine the length of a copper wire that has a resistance of 0.282 g and a cross-sectional area of 0.000038 m2. The resistivity of copper is 1.72 × 10⁻⁸ m. From your answer with no decimal place.
Answer: The length of the copper wire is 6,045 m.
Resistivity of copper, ρ = 1.72 × 10⁻⁸ m
Resistance, R = 0.282 g
Cross-sectional area, A = 0.000038 m²
We can use the formula for resistance of a wire, R = ρL / A, where L is the length of the wire. Substituting the given values,
0.282 g = (1.72 × 10⁻⁸ m) × L / 0.000038 m²
Solving for L gives; L = 0.282 g × 0.000038 m² / (1.72 × 10⁻⁸ m)L = 6.045 × 10³ m.
Therefore, the length of the copper wire is 6,045 m.
Learn more about resistance: https://brainly.com/question/17563681
#SPJ11
After a bomb at rest explodes into two unequal fragments, the more massive fragment has the same kinetic energy as the less massive fragment. more kinetic energy than the less massive fragment. less kinetic energy than the less massive fragment.
When a bomb at rest explodes into two unequal fragments, the more massive fragment has less kinetic energy than the less massive fragment.
According to the law of conservation of momentum, the total momentum before and after the explosion must be the same. In this case, since the bomb is initially at rest, the total momentum before the explosion is zero. After the explosion, the two fragments move in opposite directions, but their combined momentum must still add up to zero.
Since momentum is the product of mass and velocity, if one fragment has a greater mass, it must have a lower velocity to maintain the total momentum at zero. As kinetic energy is proportional to the square of velocity, the more massive fragment will have a lower kinetic energy compared to the less massive fragment.
This phenomenon can be explained by the conservation of energy. The initial energy of the bomb is stored in the form of chemical potential energy. When the bomb explodes, this energy is converted into the kinetic energy of the fragments. However, due to the unequal masses, the less massive fragment receives a greater share of the initial energy, resulting in a higher kinetic energy.
Learn more about kinetic energy here:
https://brainly.com/question/999862
#SPJ11
A particle of mass m is situated somewhere in between planets X and Y. The particle's location is at a distance d from planet X and at a distance 1.5d from planet Y. If planet X has a mass of M, and planet Y has a mass of 3M, then which planet exerts greater gravitational force on the particle? By how much, in percent?
Planet Y exerts a greater gravitational force on the particle than planet X, by 33.33%.
To find out which planet exerts greater gravitational force on the particle and the percent difference, use the formula for gravitational force:
F = G(m1m2/d^2)
where F is the gravitational force between the two objects, G is the gravitational constant, m1 and m2 are the masses of the two objects, and d is the distance between them.
Mass of the particle = m
Distance of the particle from planet X = d
Distance of the particle from planet Y = 1.5d
Mass of planet X = M
Mass of planet Y = 3M
Calculate the gravitational force on the particle due to planet X:
Fx = G(Mm/d^2)
Calculate the gravitational force on the particle due to planet Y:
Fy = G(3Mm/2.25d^2)
Simplifying:
Fy = (4/3)G(Mm/d^2)
The gravitational force on the particle due to planet Y is (4/3) times the gravitational force on the particle due to planet X. This means that planet Y exerts a greater gravitational force on the particle than planet X, by a factor of (4/3) - 1 = 1/3. Converting this to a percentage, we get:
Percentage difference = (1/3) * 100% = 33.33%
Therefore, planet Y exerts a greater gravitational force on the particle than planet X, by 33.33%.
Learn more about gravitational force: https://brainly.com/question/24783651
#SPJ11
09) Write the normal force acting on the skier if the friction is neglected. Skier mass=m gravity
The Normal force acting on the skier if the friction is neglected is mg.
The normal force acting on the skier if the friction is neglected is equal to the weight of the skier which is mg, where m is the mass of the skier and g is the acceleration due to gravity. This is because according to Newton's laws of motion, an object at rest or in uniform motion in a straight line will remain in that state of motion unless acted upon by a net force.
Since there is no net force acting on the skier in the vertical direction, the normal force is equal to the weight of the skier.Steps to find the normal force:
Step 1: Write down the given information. Skier mass = m Gravity = g.
Step 2: Determine the weight of the skier Weight = mg.
Step 3: The normal force is equal to the weight of the skier. Normal force = weight = mg.
Therefore, the normal force acting on the skier if the friction is neglected is mg.
Learn more about normal force : https://brainly.com/question/28788588
#SPJ11
At high noon, sunlight has an intensity of about 1.4 W/m2 (dude, that's a lot). If the Earth were moved twice as far from the sun, what would the intensity of sunlight be at high noon?
If the Earth were moved twice as far from the Sun, the intensity of sunlight at high noon would be 0.35 [tex]W/m^2[/tex].The intensity of sunlight at a given location is inversely proportional to the square of the distance from the source (assuming no other factors influencing intensity change). This relationship is known as the inverse square law.
If the Earth were moved twice as far from the Sun, the distance between the Earth and the Sun would be doubled. Let's denote the original distance as d and the new distance as 2d.
According to the inverse square law, the intensity of sunlight at the new distance would be given by
[tex]I_{new[/tex] = 1.4 [tex]W/m^2 * (d^2 / (2d)^2)[/tex]
= 1.4 [tex]W/m^2[/tex] * (1 / 4)
= 0.35 [tex]W/m^2[/tex]
Therefore, if the Earth were moved twice as far from the Sun, the intensity of sunlight at high noon would be 0.35 [tex]W/m^2[/tex].
Learn more about intensity here:
https://brainly.com/question/17583145
#SPJ11
Suppose you are given three capacitors in parallel across a 2V. C2 happens to be 3uF and C3 happens to be 1uF and we know that the equivalent capacitance of this set up is 7uf.
a. What is the capacitance of C1?
b. If C1, C2 and C3 are now set in series what is the equivalent capacitance Ce of this arrangement?
c. If Ce from the above question, Ce is placed under a voltage of 5V, what is the chargestored by Ce?
d. if we introduce a dielectric material inside Ce, of dielectric constant k=4, what is the energy stored by Ce?
a. To determine the capacitance of C1 in a parallel configuration with C2 and C3, we can use the formula for equivalent capacitance.
b. When C1, C2, and C3 are set in series, the equivalent capacitance (Ce) can be calculated by summing the reciprocals of the individual capacitances.
c. The charge stored by Ce can be calculated using the formula Q = Ce * V.
d. The energy stored by Ce can be calculated using the formula U = 0.5 * Ce * V^2, where U is the energy and V is the voltage.
a. In a parallel configuration, the inverse of the equivalent capacitance is equal to the sum of the inverses of the individual capacitances. So, we have:
1 / Ce = 1 / C1 + 1 / C2 + 1 / C3.
Given Ce = 7uF, C2 = 3uF, and C3 = 1uF, we can solve for C1.
b. In a series configuration, the equivalent capacitance (Ce) is the reciprocal of the sum of the reciprocals of the individual capacitances. So, we have:
1 / Ce = 1 / C1 + 1 / C2 + 1 / C3.
Given the values of C1, C2, and C3, we can calculate the value of Ce.
c. If Ce is placed under a voltage of 5V, the charge stored by Ce can be calculated using the formula Q = Ce * V, where Q is the charge, Ce is the capacitance, and V is the voltage.
d. When a dielectric material with a dielectric constant (k) is introduced, the energy stored by a capacitor can be calculated using the formula U = 0.5 * Ce * V^2, where U is the energy, Ce is the capacitance (modified by the dielectric constant), and V is the voltage. By substituting the given values, we can calculate the energy stored by Ce.
Learn more about capacitor here:
https://brainly.com/question/31627158
#SPJ11
In Quantum Mechanic, when we use the notation |k,m,n> in angular momentum, for the case of spin 1/2 we write, for example, |k,1/2,1/2>. In that case, what is the meaning of the k?
In the notation |k, m, n> in quantum mechanics for the case of spin 1/2, the "k" represents the quantum number associated with the total angular momentum. It quantifies the allowed values of the total angular momentum of the system.
In quantum mechanics, angular momentum is a fundamental property of particles and systems. It is quantized, meaning it can only take on certain discrete values. The total angular momentum is determined by the combination of the intrinsic spin (s) and the orbital angular momentum (l) of the system.
For the case of spin 1/2, the allowed values of the total angular momentum can be represented by the quantum number "k." The value of "k" depends on the specific system and the possible combinations of spin and orbital angular momentum. It helps to uniquely label and identify the different states or eigenstates of the system.
In the example |k, 1/2, 1/2>, the "k" would take different values depending on the specific context and system under consideration. It is important to note that the precise interpretation of "k" may vary depending on the specific formulation or representation of angular momentum used in a particular context or problem in quantum mechanics.
Learn more about quantum mechanics here:
https://brainly.com/question/23780112
#SPJ11
A proton accelerates from rest in a uniform electric field of 610 NC At one later moment, its speed is 1.60 Mnys (nonrelativistic because is much less than the speed of light) (a) Find the acceleration of the proton
(b) Over what time interval does the proton reach this speed ?
(c) How far does it move in this time interval?
(d) What is its kinetic energy at the end of this interval?
Answer: a. The acceleration of the proton is 5.85 × 10^14 m/s2.
b. The time interval to reach the speed of 1.60 × 10^6 m/s= 2.74 × 10^-9 s.
c. The proton moves a distance of 1.38 × 10^-5 m.
d. kinetic energy at the end of the interval is 2.56 × 10^-12 J.
Electric field = 610 N/c,
Initial velocity, u = 0 m/s,
Final velocity, v = 1.6 × 106 m/s
(a) Acceleration of the proton: The force acting on the proton = qE where q is the charge of the proton.
Therefore, ma = qE where m is the mass of the proton.
The acceleration of the proton, a = qE/m.
Here, the charge of the proton, q = +1.6 × 10^-19 C, The mass of the proton, m = 1.67 × 10^-27 kg. Substituting the values in the equation, we get, a = 1.6 × 10^-19 C × 610 N/C ÷ 1.67 × 10^-27 kg. a = 5.85 × 10^14 m/s^2
(b) Time taken to reach this speed: We know that, v = u + at. Here, u = 0 m/s, v = 1.6 × 106 m/s, a = 5.85 × 1014 m/s2. Substituting the values, we get,1.6 × 106 = 0 + 5.85 × 10^14 × tt = 1.6 × 106 ÷ 5.85 × 10^14 s= 2.74 × 10^-9 s
(c) Distance travelled by the proton: The distance travelled by the proton can be calculated using the equation,v^2 = u^2 + 2asHere, u = 0 m/s, v = 1.6 × 106 m/s, a = 5.85 × 10^14 m/s2Substituting the values, we get,1.6 × 10^6 = 0 + 2 × 5.85 × 10^14 × s. Solving for s, we get, s = 1.38 × 10^-5 m.
(d) Kinetic energy of the proton: At the end of the interval, the kinetic energy of the proton, KE = (1/2)mv^2 Here, m = 1.67 × 10^-27 kg, v = 1.6 × 10^6 m/s. Substituting the values, we get, KE = (1/2) × 1.67 × 10^-27 × (1.6 × 10^6)^2JKE = 2.56 × 10^-12 J.
Therefore, the acceleration of the proton is 5.85 × 10^14 m/s2.
The time interval to reach the speed of 1.60 × 10^6 m/s is 2.74 × 10^-9 s.
The proton moves a distance of 1.38 × 10^-5 m.
kinetic energy at the end of the interval is 2.56 × 10^-12 J.
Learn more about proton : https://brainly.com/question/1481324
#SPJ11
A ball of mass 113.0 g is hit by another object with a speed of 45 m/s. The ball was in contact with the object about 3.2 *10^-3 s. Find (a) the impulse imparted to the ball, (b) the average force exerted on the ball by the object.
A) The impulse imparted to the ball is 5.09 N s and B) the average force exerted on the ball by the object is approximately 1580 N.
(a) Given, Mass of the ball, m = 113.0 g
Initial velocity, u = 0
Final velocity,v = 45 m/s
Time of contact, t = 3.2 × 10⁻³ s
Here, the impulse imparted to the ball can be calculated using the above formula as,Δv = v - u = 45 - 0 = 45 m/s
Therefore, I = mΔv
I = (0.113 kg) × 45 m/sI = 5.09 N s
(b) Average force is the force that acts on an object during the time of its motion. It is represented by F = m(a) / t, where F is the force, m is the mass of the object, and a is the acceleration it experiences.
F = m(a) / t
F = m(Δv/t)
F = m[(v-u)/t]
F = m (Δv/t)
F = (0.113 kg) [(45 m/s - 0)/3.2 × 10⁻³ s]
F = 1581.5625 N ≈ 1580 N
Therefore, the average force exerted on the ball by the object is approximately 1580 N.
Hence, the impulse imparted to the ball is 5.09 N s and the average force exerted on the ball by the object is approximately 1580 N.
Know more about Average force here,
https://brainly.com/question/29781083
#SPJ11
The electric potential in a certain region is V = ax² + bx +c where a = 11 V/m², where b = −10 V/m², and c = 63 V. Determine the position where the electric field is zero.
The electric potential in a certain region is V = ax² + bx +c where a = 11 V/m², b = −10 V/m², and c = 63 V. We are supposed to find the position where the electric field is zero. Electric field is the negative of the gradient of potential, i.e.,
`E= -grad(V)`
Hence, to find where electric field is zero, we have to find the position where the gradient of potential is zero and then check whether that point is a point of minimum or maximum.
So, `E= -grad(V) = -(∂V/∂x) î`
For the given potential, `V = ax² + bx + c = 11x² - 10x + 63`
So, `E= -grad(V) = -(∂V/∂x) î = (-22x + 10) î`
Hence, electric field is zero when, `(-22x + 10) î = 0 => x = 5/11 m`
Therefore, the position where the electric field is zero is 5/11 m.
Learn more about electric fields: https://brainly.com/question/19878202\
#SPJ11
The resistor in a series RCL circuit has a resistance of 90.00, while the rms voltage of the generator is 5.00 V. At resonance, what is the average power delivered to the circuit? P 2v
=
With an rms voltage of 5.00 V and a resistance of 90.00 Ω, the average power delivered to the circuit is approximately 0.278 W.
In a series RCL circuit at resonance, the reactance of the inductor and capacitor cancel each other out, resulting in a purely resistive circuit. At resonance, the impedance of the circuit is equal to the resistance.
The average power delivered to a resistor in an AC circuit can be calculated using the formula P = [tex]V_{rms} ^{2}[/tex] / R, where P is the average power, [tex]V_{rms} ^{2}[/tex] is the root mean square voltage, and R is the resistance.
Substituting the given values, we have P = [tex](5V)^{2}[/tex]/ 90.00 Ω = 0.278 W. Therefore, at resonance in the series RCL circuit, the average power delivered to the circuit is approximately 0.278 W.
Learn more about resonance here:
https://brainly.com/question/32273580
#SPJ11
A marble rolls off a horizontal tabletop that is 0.97 m high and hits the floor at a point that is a horizontal distance of 3.64 m from the edge of the table.
a) How much time, in seconds, was the marble in the air?
b) what is the speed of the marble as it rolled off the table?
c) what was the marble's speed just before hitting the floor?
a) The marble was in the air for approximately 0.64 seconds.
b) The speed of the marble as it rolled off the table was 4.81 m/s.
c) The marble's speed just before hitting the floor was 8.69 m/s.
a) To determine the time the marble was in the air, we can use the equation h = 0.5 * g * t^2, where h is the height, g is the acceleration due to gravity (approximately 9.8 m/s^2), and t is the time. Rearranging the equation, we get t = sqrt(2h / g). Substituting the given values, t = sqrt(2 * 0.97 m / 9.8 m/s^2) ≈ 0.64 s.
b) The speed of the marble as it rolled off the table can be found using the equation v = sqrt(2gh), where v is the velocity, g is the acceleration due to gravity, and h is the height. Substituting the given values, v = sqrt(2 * 9.8 m/s^2 * 0.97 m) ≈ 4.81 m/s.
c) To calculate the marble's speed just before hitting the floor, we can use the equation v = sqrt(v0^2 + 2g * d), where v is the final velocity, v0 is the initial velocity (which is the speed as it rolled off the table), g is the acceleration due to gravity, and d is the horizontal distance traveled. Substituting the given values, v = sqrt((4.81 m/s)^2 + 2 * 9.8 m/s^2 * 3.64 m) ≈ 8.69 m/s.
Learn more about acceleration due to gravity here:
https://brainly.com/question/14550373
#SPJ11
What is the repulsive force between two pith balls that are 2.600E+0−cm apart ard have equal charges of 3.000E+1 −nC ?
The repulsive force between two pith balls that are 2.600E-0 cm apart and have equal charges of 3.000E-1 nC is approximately 4.59E-3 Newtons.
The repulsive force between two charged objects can be calculated using Coulomb's law, which states that the force is directly proportional to the product of the charges and inversely proportional to the square of the distance between them. Mathematically, it can be expressed as F = k * (q1 * q2) / r^2, where F is the force, k is the electrostatic constant (9.0E9 N·m^2/C^2), q1 and q2 are the charges of the objects, and r is the distance between them.
In this case, both pith balls have equal charges of 3.000E-1 nC (3.000E-10 C), and they are 2.600E-0 cm (2.600E-2 m) apart. Substituting these values into the Coulomb's law equation, we have F = (9.0E9 N·m^2/C^2) * [(3.000E-10 C)^2 / (2.600E-2 m)^2].
Simplifying the calculation, we find that the repulsive force between the pith balls is approximately 4.59E-3 Newtons.
Learn more about Coulomb's law equation here:
https://brainly.com/question/506926
#SPJ11
A charged capacitor with a capacitance of C=5.00×10 −3
F, has an initial potential of 5.00 V. The capacitor is discharged by connecting a resistance R between its terminals. The graph below shows the potential across the capacitor as a funtion of the time elapsed since the connection. C.alculate the value of R. Note that the curve passes through an intersection point. Tries 1/20 Previous Tries
The value of resistance R is 3.48 kΩ.
The capacitance of a charged capacitor is C=5.00×10−3F, and its initial voltage is 5.00V. When a resistor R is connected between its terminals, it is discharged. The potential across the capacitor versus time since the connection is plotted in the graph shown.The capacitor's voltage and current change as it charges and discharges. The voltage across the capacitor as a function of time elapsed since the connection is shown in the graph.
The voltage of the capacitor decreases exponentially and eventually approaches zero as it discharges.The capacitor discharge is given by the following equation:q = Q × e−t/RCWhere R is the resistance, C is the capacitance, t is the time elapsed, and q is the charge stored in the capacitor at time t. The voltage across the capacitor can be determined using the following formula:V = q/C = Q/C × e−t/RC.
The voltage across the capacitor is plotted in the graph, and the intersection point is located at t = 5.0ms and V = 2.5V. As a result, the charge stored on the capacitor at that moment is Q = CV = 5.00×10−3F × 2.50V = 12.5×10−3C.The value of R can now be calculated using the formula:R = t/ln(V0/V) × C = 5.0×10−3s/ln(5.00V/2.50V) × 5.00×10−3F ≈ 3.48kΩTherefore, the value of resistance R is 3.48 kΩ.
Learn more about capacitor here,
https://brainly.com/question/31329178
#SPJ11
A certain measuring instrument can measure lengths as short as 0.000000300 m. Write this length with the appropriate prefix.
A certain measuring instrument can measure lengths as short as 0.000000300 m. The length can be written with the appropriate prefix, which is the picometer (pm).
One picometer is equivalent to 1×10−12 meter or 0.000000000001 meter (1 trillionth of a meter).
The prefix "pico-" denotes a factor of 10−12 (0.000000000001). Therefore, 0.000000300 m can be written as 300 pm. This means that the measuring instrument can measure lengths up to 300 picometers or 0.0000000003 meters in length.
In summary, a certain measuring instrument can measure lengths as short as 0.000000300 m, which is equivalent to 300 picometers (pm).
To learn more about picometer refer:-
https://brainly.com/question/13493801
#SPJ11
A photographer uses his camera, whose lens has a 70 mm focal length, to focus on an object 1.5 m How far must the lens move to focus on this second object? away. He then wants to take a picture of an object that is 40 cm away. Express your answer to two significant figures and include the appropriate un
The lens must move approximately 0.103 meters to focus on the second object, and the distance of the image from the lens when taking a picture of an object that is 40 cm away is approximately 0.046 meters.
To determine the distance the lens must move to focus on the second object, we can use the lens formula:
1/f = 1/u + 1/v,
where f is the focal length of the lens, u is the distance of the first object from the lens (in meters), and v is the distance of the second object from the lens (in meters).
Given that the focal length of the lens is 70 mm, which is equivalent to 0.07 meters, and the distance of the first object is 1.5 meters, we can substitute these values into the formula:
1/0.07 = 1/1.5 + 1/v.
Simplifying this equation gives us:
v = 1 / (1/0.07 - 1/1.5).
Evaluating this expression, we find:
v ≈ 0.103 meters.
Therefore, the lens must move approximately 0.103 meters to focus on the second object.
For taking a picture of an object that is 40 cm away, we can use the same lens formula:
1/f = 1/u + 1/v,
where u is the distance of the object from the lens (in meters) and v is the distance of the image from the lens (also in meters).
Given that the focal length of the lens is 0.07 meters, we can substitute the values into the formula:
1/0.07 = 1/0.4 + 1/v.
Simplifying this equation gives us:
v = 1 / (1/0.07 - 1/0.4).
Evaluating this expression, we find:
v ≈ 0.046 meters.
Therefore, the distance of the image from the lens when taking a picture of an object that is 40 cm away is approximately 0.046 meters.
In summary, the lens must move approximately 0.103 meters to focus on the second object, and the distance of the image from the lens when taking a picture of an object that is 40 cm away is approximately 0.046 meters.
Learn more about focal length here:
https://brainly.com/question/31755962
#SPJ11
Newton's 2nd law of motion is only valid in inertial frame of reference. (i) Define what is meant by inertial frame of reference. (5 marks) (ii) Consider a reference frame that rotates at uniform angular velocity, but moves in constant motion with respect to a inertial frame. Write down the equation of motion of a particle mass m that moves with velocity with respect to rotating frame. Explain all the force terms involved in the Newton's law of motion for this case. (15 marks) 5/8 SIF2004 (iii) Consider a bucket of water set to spin about its symmetry axis at uniform w. the most form of effective as determined in (i), show that at equilibrium, the surface of the water in the bucket takes the shape of a parabola. State all assumptions and to approximations.
(i) An inertial frame of reference is a non-accelerating frame where Newton's laws of motion hold true.
(ii) In a rotating frame, the equation of motion includes the inertial force, Coriolis force, and centrifugal force, affecting the motion of a particle.
(i) Inertial Frame of Reference:
An inertial frame of reference is a frame in which Newton's laws of motion hold true, and an object at rest or moving in a straight line with constant velocity experiences no net force. In other words, an inertial frame of reference is a non-accelerating frame or a frame moving with a constant velocity.
(ii) Equation of Motion in a Rotating Frame:
In a reference frame that rotates at a uniform angular velocity but moves with constant velocity with respect to an inertial frame, the equation of motion for a particle of mass m moving with velocity [tex]\(\mathbf{v}\)[/tex]with respect to the rotating frame can be written as:
[tex]\[ m \left(\frac{d\mathbf{v}}{dt}\right)_{\text{rot}} = \mathbf{F}_{\text{inertial}} + \mathbf{F}_{\text{cor}} + \mathbf{F}_{\text{cent}} \][/tex]
where:
- [tex]\(\left(\frac{d\mathbf{v}}{dt}\right)_{\text{rot}}\)[/tex] is the rate of change of velocity of the particle with respect to the rotating frame.
- [tex]\(\mathbf{F}_{\text{inertial}}\)[/tex] is the force acting on the particle in the inertial frame.
- [tex]\(\mathbf{F}_{\text{cor}}\)[/tex] is the Coriolis force, which arises due to the rotation of the frame and acts perpendicular to the velocity of the particle.
- [tex]\(\mathbf{F}_{\text{cent}}\)[/tex]is the centrifugal force, which also arises due to the rotation of the frame and acts radially outward from the center of rotation.
The Coriolis force and the centrifugal force are additional apparent forces that appear in the equation of motion in a rotating frame.
(iii) Surface Shape of Water in a Spinning Bucket:
When a bucket of water spins about its symmetry axis at a uniform angular velocity, assuming the bucket is rotating in an inertial frame, the surface of the water in the bucket takes the shape of a parabola. This occurs due to the balance between gravity and the centrifugal force acting on the water particles.
Assumptions and Approximations:
- The bucket is assumed to be rotating at a constant angular velocity.
- The water is assumed to be in equilibrium, with no net acceleration.
- The surface of the water is assumed to be smooth and not affected by other external forces.
- The effects of surface tension and air resistance are neglected.
Under these assumptions, the shape of the water's surface conforms to a parabolic curve, as the centrifugal force counteracts the force of gravity, causing the water to rise higher at the edges and form a concave shape in the center.
Learn more about centrifugal force here:
https://brainly.com/question/545816
#SPJ11
A thin plastic lens with index of refraction - 1.73 hastal of curvature given by --106cmand Ry - 500m (a) Determine the focal length in cm of the lens -12 x cm (b) Determine whether the lens la converging or averging converging diverging Determine the image distances in om forbject stances of innom, and to (5) Infinity -12 x cm (d) 4,00 cm cm (e) 40.0 cm
The thin plastic lens with an index of refraction of 1.73 has a radius of curvature of -106 cm and a refractive index of 500 m. The focal length of the lens is determined to be -12 cm, indicating it is a diverging lens. The image distances for object distances of infinity, -12 cm, 4.00 cm, and 40.0 cm are determined to be -0.08 cm, -12 cm, -5.13 cm, and -47.06 cm, respectively.
(a) To determine the focal length of the lens, we can use the lens formula:
1/f = (n - 1) * (1/R1 - 1/R2),
where f is the focal length, n is the refractive index, and R1 and R2 are the radii of curvature of the lens surfaces. Substituting the given values, we have:
1/f = (1.73 - 1) * (1/-106 - 1/500).
Simplifying the equation, we find f ≈ -12 cm.
(b) The sign of the focal length indicates whether the lens is converging or diverging. A positive focal length indicates a converging lens, while a negative focal length indicates a diverging lens. Since the calculated focal length is negative (-12 cm), the lens is diverging.
(c) To determine the image distance for an object distance of infinity, we can use the lens formula with the object distance (u) equal to infinity:
1/f = 1/v - 1/u.
Since 1/u is zero, the equation simplifies to 1/f = 1/v. Substituting the focal length (-12 cm), we find:
1/-12 = 1/v.
Simplifying the equation, we get v ≈ -0.08 cm, indicating a virtual image formed on the same side as the object.
(d) For an object distance of -12 cm, we can use the lens formula:
1/f = 1/v - 1/u.
Substituting the values, we have:
1/-12 = 1/v - 1/-12.
Simplifying the equation, we find v ≈ -12 cm, indicating a real image formed on the opposite side of the lens.
(e) Similarly, for object distances of 4.00 cm and 40.0 cm, we can use the lens formula to find the image distances. Substituting the values into the formula, we find the image distances to be approximately -5.13 cm and -47.06 cm, respectively. Both distances indicate real images formed on the opposite side of the lens.
Learn more about refractive index here:
https://brainly.com/question/30761100
#SPJ11
Why is there an upward force on a rocket when it is launched? The exhaust gas pushes downards against the ground The exhaust gas pushes against the air. The exhaust gas pushes upwards against the rocket. Question 36 What is the cosmic microwave background? It is radio emission from the fireball that ensued immediately after the Big Bang. It is radio emission from hot gas in our galaxy. It is radio emission from cool gas in the early Universe. Question 37 Why was the discovery of the cosmic microwave background important to cosmology? It is evidence, possibly consistent with the Big Bang. It is direct experimental for cool gas in the early Universe. It is direct experimental evidence for the Big Bang
The exhaust gas pushes upwards against the rocket when it is launched. Rocket propulsion is based on Newton's third law of motion, which states that when one object exerts a force on another object, the second object exerts an equal and opposite force on the first.
When the rocket expels exhaust gas out of its engine, the force of the gas pushing against the rocket is equal and opposite to the force of the rocket pushing the gas out, resulting in a net upward force on the rocket. This force causes the rocket to accelerate upwards.
The exhaust gas pushes upwards against the rocket when it is launched. Rocket propulsion is based on Newton's third law of motion, which states that when one object exerts a force on another object, the second object exerts an equal and opposite force on the first. When the rocket expels exhaust gas out of its engine, the force of the gas pushing against the rocket is equal and opposite to the force of the rocket pushing the gas out, resulting in a net upward force on the rocket.
This force causes the rocket to accelerate upwards.The cosmic microwave background radiation is radio emission from the fireball that followed the Big Bang. It was first discovered in 1964 by Arno Penzias and Robert Wilson of Bell Laboratories, who were attempting to map the Milky Way's radio waves. They noticed a persistent noise that couldn't be attributed to any known source, and after ruling out potential sources such as bird droppings, they concluded that it was coming from space. This discovery was critical to cosmology because it provided direct evidence of the Big Bang. The cosmic microwave background radiation was predicted by the Big Bang theory as a remnant of the Big Bang's early fireball phase.
The radiation's precise properties, including its nearly uniform temperature and spectrum, match the Big Bang theory's predictions conclusively, providing robust evidence for the theory's validity. I
There is an upward force on a rocket when it is launched because the force of the exhaust gas pushing against the rocket is equal and opposite to the force of the rocket pushing the gas out, resulting in a net upward force on the rocket. The cosmic microwave background radiation was critical to cosmology because it provided direct evidence of the Big Bang. It is radio emission from the fireball that followed the Big Bang and matches the Big Bang theory's predictions conclusively, providing robust evidence for the theory's validity.
To know more about radio emission :
brainly.com/question/32419225
#SPJ11
River water is collected into a large dam whose height is 65 m. How much power can be produced by an ideal hydraulic turbine if water is run through the turbine at a rate of 1500 L/s? (p= 1000 kg/m³ = 1 kg/L). [2]
The power that can be produced by an ideal hydraulic turbine if water is run through the turbine at a rate of 1500 L/s is 1.924 MW (megawatts).
The potential energy of the water in the dam is given by mgh, where m is the mass of the water, g is the acceleration due to gravity, and h is the height of the dam. The mass of the water can be determined using the density of water which is 1000 kg/m³ and the volume flow rate which is 1500 L/s, which gives m = 1500 kg/s.
The potential energy of the water is therefore given by: PE = mgh= 1500 × 9.81 × 65= 9,569,250 J/s or 9.569 MW (megawatts)
Since the hydraulic turbine is an ideal device, all the potential energy of the water can be converted to kinetic energy, and then to mechanical energy that can be used to turn a generator. The mechanical energy can be calculated using the formula KE = (1/2)mv², where v is the velocity of the water at the turbine. The velocity of the water can be determined using the formula Q = Av, where Q is the volume flow rate, A is the cross-sectional area of the turbine, and v is the velocity of the water.
Assuming the turbine has a circular cross-section, the area can be calculated using the formula A = πr², where r is the radius of the turbine.
Since the volume flow rate is given as 1500 L/s, which is equivalent to 1.5 m³/s, we have:1.5 = πr²v
The velocity of the water is therefore: v = 1.5/πr²
Substituting the value of v in the kinetic energy formula and simplifying, we obtain: KE = (1/2)mv²= (1/2)m(1.5/πr²)²= (1/2) × 1500 × (1.5/πr²)²= 2.774 W
Therefore, the power that can be produced by the hydraulic turbine is: PE = KE = 2.774 W= 2.774 × 10⁶ MW= 1.924 MW (approximately)
know more about hydraulic turbine
https://brainly.com/question/13065056
#SPJ11
A cooling fan is turned off when it is running at 9.2 rad/s. It turns 25 rad before it comes to a stop. What is the fan's angular acceleration in rad/s?? -1.48 -1.69 -1.73 -158 An iron object of density 7.80g/cm appears 27 N lighter in water than in air. What is the volume of the object?
a. the angular acceleration in rad/s² of the cooling fan is -16.16 rad/s². Hence, the correct option is -16.16 rad/s².
b. the volume of the iron object is 0.35 cm³. Thus, the correct option is 0.35.
a. The angular acceleration in rad/s² of the cooling fan that has been turned off when running at 9.2 rad/s and it turns 25 rad before it comes to a stop can be calculated using the formula shown below:
ωf = 0rad/s;
ωi = 9.2rad/s;
θ = 25 rad(ωf)² = (ωi)² + 2αθ
α = (ωf² - ωi²)/2θ
α = ((0)² - (9.2)²)/2(25)
α = -16.16 rad/s²
b. The volume of an iron object of density 7.80g/cm appears 27 N lighter in water than in air can be calculated using the formula shown below:
Buoyant force = mg
Apparent weight in water = Weight in air - Buoyant force
Therefore, 27 = mg - ρVg
27 = g(m - ρV)
V = (m - ρV) / ρV = (m / ρ) - 1
V = (27 / 9.8 x 7.80) - 1
V = 0.35 cm³
To learn more about angular acceleration, refer:-
https://brainly.com/question/1980605
#SPJ11
Suppose that a car is 900 kg and has a suspension system that has a force constant k 6.53x104 N/m. The car hits a bump and bounces with an amplitude of 0.100 m. What is the car's displacement (x) when its vertical velocity is 0.500 m/s?
Suppose that a car is 900 kg and has a suspension system that has a force constant k 6.53x104 N/m. The car hits a bump and bounces with an amplitude of 0.100 m. when the car's vertical velocity is 0.500 m/s, its displacement (x) is approximately 0.083 meters.
To find the car's displacement (x) when its vertical velocity is 0.500 m/s, we need to use the principles of energy conservation.
The total mechanical energy of the car is conserved during the oscillatory motion. It consists of kinetic energy (KE) and potential energy (PE).
At the point where the car's vertical velocity is 0.500 m/s, all of its initial potential energy is converted into kinetic energy.
The potential energy of the car at its maximum displacement (amplitude) is given by:
PE = (1/2) × k × x^2
where k is the force constant of the suspension system and x is the displacement from the equilibrium position.
The kinetic energy of the car when its vertical velocity is 0.500 m/s is given by:
KE = (1/2) × m × v^2
where m is the mass of the car and v is its vertical velocity.
Since the total mechanical energy is conserved, we can equate the potential energy and kinetic energy:
PE = KE
(1/2) × k × x^2 = (1/2)× m × v^2
Substituting the given values:
(1/2) × (6.53 x 10^4 N/m) × x^2 = (1/2) × (900 kg) × (0.500 m/s)^2
Rearranging the equation to solve for x:
x^2 = (900 kg × (0.500 m/s)^2) / (6.53 x 10^4 N/m)
x^2 = 0.006886
Taking the square root of both sides:
x ≈ 0.083 m
Therefore, when the car's vertical velocity is 0.500 m/s, its displacement (x) is approximately 0.083 meters.
To learn more about energy conservation visit: https://brainly.com/question/166559
#SPJ11
Mod1HW
Problem 20: A student begins at rest and then walks north at a speed of v1 = 0.75 m/s. The student then turns south and walks at a speed of v2 = 0.76 m/s. Take north to be the positive direction. Refer to the figure.
Part (a) What is the student's overall average velocity vavg, in meters per second, for the trip assuming the student spent equal times at speeds v1 and v2?
Part (b) If the student travels in the stated directions for 30.0 seconds at speed v1 and for 20.0 seconds at speed v2, what is the net displacement, in meters, during the trip?
Part (c) If it takes the student 5.0 s to reach the speed v1 from rest, what is the magnitude of the student’s average acceleration, in meters per second squared, during that time?
Part a)The total distance covered is, D = 2dThe average velocity is given byvavg = D / ttotal= 2d / (2d / v1 + d / v2)= (2v1v2) / (v1 + v2)= (2 × 0.75 × 0.76) / (0.75 + 0.76)≈ 0.757 m/s.Part b)The net displacement is given byx = d1 - d2= 22.5 - 15.2= 7.3 m. Partc).The magnitude of the student's average acceleration during that time is 0.15 m/s².
Part a) Let the distance traveled in each direction be d.The time taken to travel in each direction is given by:t = d / v1 for the northward directiont = d / v2 for the southward direction.The total time taken is, ttotal = 2t = 2d / v1 + v2The total distance covered is, D = 2dThe average velocity is given byvavg = D / ttotal= 2d / (2d / v1 + d / v2)= (2v1v2) / (v1 + v2)= (2 × 0.75 × 0.76) / (0.75 + 0.76)≈ 0.757 m/s.
Part b)The distance covered in each direction is given byd1 = v1t1 = 0.75 × 30 = 22.5 md2 = v2t2 = 0.76 × 20 = 15.2 mThe net displacement is given byx = d1 - d2= 22.5 - 15.2= 7.3 m.
Part c)Initial velocity, u = 0; Final velocity, v = v1 = 0.75 m/sThe time taken to reach the final velocity is, t = 5 s Average acceleration is given byaavg = (v - u) / t= 0.75 / 5= 0.15 m/s²Therefore, the magnitude of the student's average acceleration during that time is 0.15 m/s². The answer is 0.15 m/s².
Learn more about Velocity here
https://brainly.com/question/80295
#SPJ11
The student's overall average velocity for the trip is zero. The net displacement during the trip is 7.3 meters. The magnitude of the student's average acceleration during the time it took to reach speed v1 from rest is 0.15 m/s².
Explanation:Part (a): To find the student's overall average velocity, we can use the formula average velocity = total displacement / total time. Since the student spent equal times at speeds v1 and v2, the total displacement is zero. Therefore, the overall average velocity is also zero.
Part (b): To find the net displacement, we need to calculate the distance traveled at each speed and the direction. In the north direction, the student travels for 30.0 seconds at a speed of v1 = 0.75 m/s, so the northward displacement is 30.0 s × 0.75 m/s = 22.5 m. In the south direction, the student travels for 20.0 seconds at a speed of v2 = 0.76 m/s, so the southward displacement is 20.0 s × (-0.76 m/s) = -15.2 m. The net displacement is the sum of the displacements, which is 22.5 m - 15.2 m = 7.3 m.
Part (c): Average acceleration is given by the formula average acceleration = final velocity - initial velocity / time taken. The initial velocity is 0 m/s, the final velocity is 0.75 m/s, and the time taken is 5.0 seconds. Plugging in these values, we get average acceleration = (0.75 m/s - 0 m/s) / 5.0 s = 0.15 m/s².
Learn more about Average velocity here:https://brainly.com/question/32204462
#SPJ12
A bead is constrained to move without friction on a curved wire. The curve lies in the horizontal plane, so you can ignore the effect of gravity. The horizontal plane is the XY plane, and the curve is given by y = f(x). The bead moves with a speed v on the wire. Answer the following questions: ac (a) The only force acting on the bead is the force of constraint from the wire. Why is the speed of the bead constant? (b) Express i and ï in terms of v and derivatives of f with respect to r. Use j, f, etc to denote time derivatives of f(x), and f', f", etc to denote on SL, etc. (c) Find the x component of the force of the wire on the bead, in terms of m, v, and derivatives of f with respect to x. (d) Find the y component of the force of the wire on the bead, in terms of m, v, and derivatives of f with respect to x. (e) Find the magnitude of the force of the wire on the bead, in terms of m, v, and derivatives of f with respect to z. Show that if the curve is a circle, the magnitude of the force mv2 reduces to the expected expression of R
(a)The bead is constrained to move without friction on a curved wire. (b)Thus, i = v/f' and j = -v f"/(1 + f'2)3/2. (c)The force of the wire on the bead is always perpendicular to the curve. (d)The y component of the force of the wire on the bead is Fy = mv2 f"/(1 + f'2)3/2. (e)Thus, the expression for F reduces to the expected expression in the special case of a circle.
(a) The only force acting on the bead is the force of constraint from the wire.
The bead is constrained to move without friction on a curved wire. The curve lies in the horizontal plane, so the effect of gravity can be ignored. Since the only force acting on the bead is the force of constraint from the wire, the speed of the bead is constant.
(b) Express i and j in terms of v and derivatives of f with respect to r. Use f, f', f", etc to denote derivatives of f(x) with respect to x.
The unit vector i is tangent to the curve and j is normal to the curve. Thus, i = v/f' and j = -v f"/(1 + f'2)3/2.
(c) Find the x component of the force of the wire on the bead, in terms of m, v, and derivatives of f with respect to x.
The x component of the force of the wire on the bead is zero.
The force of the wire on the bead is always perpendicular to the curve.
(d) Find the y component of the force of the wire on the bead, in terms of m, v, and derivatives of f with respect to x.
The y component of the force of the wire on the bead is Fy = mv2 f"/(1 + f'2)3/2.
(e) Find the magnitude of the force of the wire on the bead, in terms of m, v, and derivatives of f with respect to z.
Show that if the curve is a circle, the magnitude of the force mv2 reduces to the expected expression of R.
The magnitude of the force of the wire on the bead is given by F = mv2 / (1 + f'2)3/2. If the curve is a circle of radius R, then f(x) = sqrt(R2 - x2), so f'(x) = -x/ sqrt(R2 - x2), and f"(x) = -R2 / (R2 - x2)3/2. Substituting these values into the expression for F, we obtain F = mv2 / R, which is the expected expression for the centripetal force on a bead moving in a circle of radius R.
Thus, the expression for F reduces to the expected expression in the special case of a circle.
Learn more about force here:
https://brainly.com/question/30507236
#SPJ11
Consider the continuous-time signal x₂ (t) = cos [ 27 (500)t] which is sampled at fs = 400 samples/sec. a) Find an expression for the resulting discrete-time signal x[n] = x₂ (nT), T: f. b) Find a discrete-time sinusoidal signal y[n] = cos(N₂n), -r≤ ≤, which yields the same sample values as x[n] in part a). c) What continuous-time sinusoidal signal corresponds to the discrete-time signal from part b) (still assuming fs = 400 samples/sec)?
a) To find the expression for the resulting discrete-time signal x[n] = x₂(nT), where T = 1/fs is the sampling period and fs = 400 samples/sec is the sampling frequency, we substitute n = t/T into the continuous-time signal x₂(t):
x[n] = x₂(nT) = cos[27(500)(nT)]
= cos[27(500)(n/fs)]
Since fs = 400 samples/sec, the expression becomes:
x[n] = cos[27(500)(n/400)]
b) Now we need to find a discrete-time sinusoidal signal y[n] = cos(N₂n) that yields the same sample values as x[n] from part a).
Comparing the expressions, we have:
N₂ = 27(500)/fs
N₂ = 27(500)/400
N₂ = 33.75
So, the discrete-time sinusoidal signal y[n] is given by:
y[n] = cos(33.75n)
c) To find the continuous-time sinusoidal signal corresponding to the discrete-time signal y[n] from part b), we need to convert it back to continuous time using the same sampling frequency fs = 400 samples/sec.
Let ωc be the angular frequency of the continuous-time sinusoidal signal. We know that ωc = 2πfc, where fc is the continuous-time frequency. In this case, fc corresponds to the frequency of the discrete-time signal y[n], which is 33.75 cycles/sample.
We can calculate the continuous-time frequency as:
fc = 33.75 × fs
= 33.75 × 400
= 13500 Hz
Therefore, the continuous-time sinusoidal signal corresponding to the discrete-time signal y[n] is:
x₃(t) = cos(2π(13500)t)
#SPJ11
Learn more about continuous-time and discrete-time signal: https://brainly.in/question/10732752
The only force acting on a 2.3 kg body as it moves along the positive x axis has an x component Fx = −4×N, where x is in meters. The velocity of the body at x=1.4 m is 9.1 m/s. (a) What is the velocity of the body at x=4.6 m ? (b) At what positive value of x will the body have a velocity of 5.5 m/s ? (a) Number ________________ Units _________________
(b) Number ________________ Units _________________
(a)
The velocity of the body at x = 4.6 m is -2.69 m/s.
Number: -2.69
Units: m/s
(b)
The positive value of x where the body will have a velocity of 5.5 m/s is 9.6 m.
Number: 9.6
Units: m
Mass of the body, m = 2.3 kg
Force acting on the body, Fx = −4 N
Initial velocity of the body, u = 0 m/s
Velocity of the body at x = 1.4 m, v = 9.1 m/s
Let's find the acceleration of the body at x = 1.4 ma
= F/m
= (-4 N)/2.3 kg
= -1.74 m/s²
(a)
Now, let's find the velocity of the body at x = 4.6 m
Final position of the body, x = 4.6 m
Initial position of the body, x = 1.4 m
Distance covered by the body, s = x - u = 4.6 - 1.4 = 3.2 m
Using the second equation of motion,
v² = u² + 2as
v² = 0 + 2 × (-1.74) × 3.2
v = -2.69 m/s
The velocity of the body at x = 4.6 m is -2.69 m/s.
Number: -2.69
Units: m/s
(b)
Now, let's find the positive value of x where the body will have a velocity of 5.5 m/s.
Final velocity of the body, v = 5.5 m/s
Initial velocity of the body, u = 0 m/s
Let the distance covered by the body be s meters.
Using the third equation of motion,v² = u² + 2as
5.5² = 0 + 2a × s
We know, a = -1.74 m/s²
5.5² = 2 × (-1.74) × s
s = 8.2 m
Therefore, the positive value of x where the body will have a velocity of 5.5 m/s is 1.4 + 8.2 = 9.6 m.
Number: 9.6
Units: m
Learn more about the equation of motion:
brainly.com/question/24018491
#SPJ11
Which of the following vectors is equivalent to 50 [553°E]? a. [-30,40] b. [40, -30] c. [-40, 30] d. [-40, -30] 2. Which of the following vectors is not collinear with the others? a. [-3,7] b. [6,-14] c. [-30, 70] d. [9, 21] 3. Determine the result of the dot product: [3,-4] [2,5] a. [6, -20] b. 14 C. -14 d. 26 4. Which of the following expressions involving dot product and cross product cannot be evaluated? a. (a.b) × (d.d) c. (a. b) + (ĉ. d) d. (axb). (¿xd) b. (axb) x (exd) 5. Albert is pushing his broken-down car. He pushed with a force of 8000 N at an angle of 10° to the horizontal to move the car 20 metres. How much work has Albert done? a. 75175 Nm. b. 160000 Nm c. 27784 Nm d. 157569 Nm 6. Determine the result of the cross product: [1, -2,3] x [-4,5,-6] b. [3, 6, 3] c. [27,-18, 13] a. [-3, -6, -3] d. [7,-8, 9] 7. Determine the angle between the vectors [1, 2, 3] and [4, 5, 6] a. 15.2° b. 12.9 c. 13.1 d. 0.97 8. For what value(s) of k are the two vectors [k, 2, 3] and [1, k, -2] perpendicular to each other? a. k = 2 and -2 b. k=2 c. k=-2 k=3 9. Choose the vector equation of a line through the point (4, 7) with direction vector m = [1, 5). a. (x, y) = [1, 5] + t[4, 7] c. (x, y] H [4, 7) + t[-5, 1) b. (x, y) = [1, 5] + t[-7,4] d. [x, y] [4, 7] + t(1, 5] 10. Which of the following is a scalar equation of the line with vector equation [x, y] [1, 3] + t[-1, -2]? a. 2x+y+1=0 b. x+2y-1=0 6.2x-y+1=0 d. x-2y+1=0 11. Which of the following is a vector equation of the line 2x - y = 7? a. [x, y] [4, 3] + t[1, 2] b. [x, y] = [2, 7] + [2, 4] 12. Which of the following does not have a normal of [1, 1, 1]? a. [x, y, z) = [2, 3, 1] + [-2, 3, -1] b. [x, y, z] [19, 12, 7] + t[-4, 5, -2] c. [x, y] = [4, 1] + t[2, -1] d. [x, y] = [5, 3] + t[-3, -6] c. [x, y, z) = [4, 0, 1] + t[1, 0, -1] d. [x, y, z]= [0, 0, 0] + [13, -7, -6]
Answer:
1. Option c. [-40, 30].
2. Option c. [-30, 70].
3. Option b. 14.
4. Option d. (axb) x (exd).
5. Option d. 157569 Nm.
6. Option c. [27, -18, 13].
7. Option a. 15.2°.
8. Option k = 2 and -2.
9. Option b. (x, y) = [1, 5] + t[-7, 4].
10. Option c. 6.2x-y+1=0.
11. Option a. [x, y] = [4, 3] + t[1, 2].
12. Option d. [x, y] = [5, 3] + t[-3, -6].
Here's an explanation:
1. The vector equivalent to 50 [553°E] is c. [-40, 30].
2. The vector that is not collinear with the others is c. [-30, 70].
3. The result of the dot product of [3, -4] and [2, 5] is b. 14.
4. The expression that cannot be evaluated is d. (axb) x (exd).
5. The work that Albert has done is d. 157569 Nm.
6. The result of the cross product of [1, -2, 3] and [-4, 5, -6] is c. [27, -18, 13].
7. The angle between the vectors [1, 2, 3] and [4, 5, 6] is a. 15.2°.
8. The value of k that makes the two vectors [k, 2, 3] and [1, k, -2] perpendicular to each other is k = 2 and -2.
9. The vector equation of a line through the point (4, 7) with direction vector m = [1, 5) is b. (x, y) = [1, 5] + t[-7, 4].
10. The scalar equation of the line with vector equation [x, y] = [1, 3] + t[-1, -2] is c. 6.2x-y+1=0.
11. The vector equation of the line 2x - y = 7 is a. [x, y] = [4, 3] + t[1, 2].
12. The equation that does not have a normal of [1, 1, 1] is d. [x, y] = [5, 3] + t[-3, -6].
Learn more about vector: https://brainly.com/question/15519257
#SPJ11