Answer:
[tex]\%P/P_{hierro}=41.1\%\\\\\%P/P_{arena}=24.4\%\\\\\%P/P_{cobre}=30.8\%\\\\\%P/P_{aluminio}=0.6\%[/tex]
Explanation:
¡Hola!
En este caso, dado que estamos tratando con problem sobre porcentaje peso/peso de hierro, arena, cobre y aluminio, primero debemos calcular la masa inicial de estos dos primeros en la mezcla original de acuerdo con:
[tex]m_{hierro}=300g*0.60=180g\\\\m_{arena}=300*0.40=120g[/tex]
Ahora si podemos calcular la masa de la mezcla final como la suma de las masas de todos los constituyentes de la mezcla:
[tex]m_T=180g+120g+135g+2.77g=437.77g[/tex]
Finalmente, podemos calcular los porcentajes P/P como se muestra a continuación:
[tex]\%P/P_{hierro}=\frac{180g}{437.77g} *100\%=41.1\%\\\\\%P/P_{arena}=\frac{120g}{437.77g} *100\%=24.4\%\\\\\%P/P_{cobre}=\frac{135g}{437.77g} *100\%=30.8\%\\\\\%P/P_{aluminio}=\frac{g}{437.77g} *100\%=0.6\%[/tex]
¡Saludos!
Suppose that the student took one more volume
reading of 24.2 mL but forgot to measure the
pressure.
Compute the pressure expected for that
volume. kg/cm2?
Answer:
2.13 Kg/cm².
Explanation:
We'll begin by calculating the constant that exist between the pressure and the volume. This can be obtained by using the Boyle's law equation as shown below.
Boyle's law states that
PV = K
Where
P is the pressure.
V is the volume.
K is the constant.
We shall determine the value of K as follow:
Pressure (P) = 1.15 Kg/cm²
Volume (V) = 44.8 mL
Constant (K) =?
PV = K
1.15 × 44.8 = K
K = 51.52 Kg/cm²•mL
Finally, we shall determine pressure, when the volume is 24.2 mL. This can be obtained as follow:
Volume (V) = 24.2 mL
Constant (K) = 51.52 Kg/cm²•mL
Pressure (P) =?
PV = K
P × 24.2 = 51.52
Divide both side by 24.2
P = 51.52 / 24.2
P = 2.13 Kg/cm²
Therefore, the pressure is 2.13 Kg/cm².
How many moles of calcium oxide are formed when 3 moles of calcium react with oxygen?
Answer:
3 moles of CaO
Explanation:
The chemical balanced equation is;
2Ca + O₂ → 2CaO
The ratio of calcium(Ca) to Calcium Oxide(Cao) in this equation is 2:2.
Now, when 3 moles of calcium react with oxygen, Cao produced will be;
3 moles of O₂ × 2 moles of CaO/2 moles of Cao = 3 moles of CaO
If I have 0.044 mol Ammonia (NH3) molecules, how many atoms of hydrogen do I have?
Answer:
1 Answer. Before you use log you have to multiply the answer of 8.66 mol by 6.02⋅1023 by 3 because the answer of 8.66 mol by 6.02⋅1023 gives you the number of ammonia molecules and in each molecules there are 3 hydrogen atoms present.
Explanation:
Which of the following statements describes how humans would be affected if the ozone layer of Earth’s atmosphere were very damaged?
A. People would not spend as much time indoors.
B. The amount of food people eat each year would increase.
C. Human skin would burn much faster even with less exposure to sunlight.
D. Plants and flowers would grow much larger and produce more oxygen for people to breathe.
i thank its B my big brother helped me we thank its b
An aqueous solution has a hydroxide-ion concentration of 1.0x10^-3M. What is the pH of the solution?
a.11
b.3
c.-3
d.7
Which of these statements describes a difference between the mechanics of
airplane flight and rocket flight?
A. Airplanes must carry an oxidizer along with fuel.
B. Airplanes need only upward thrust as a force for flight.
C. Rockets need only upward thrust as a force for flight.
D. Rockets need air molecules from the atmosphere to generate
thrust
Answer:
C. Rockets need only upward thrust as a force for flight.
Explanation:
This is correct
Answer:
c
Explanation:
What is the difference between a cup of tea at 95°C, and a drop of tea at 95°C?
Answer:
See the explanation below
Explanation:
Both the cup of coffee and drop of coffee have the Same temperature of 95°C.
Although the difference is the cup of coffee has more heat contained in it than the drop of coffee. An explanation is when we heat a cup of coffee it will take more time to Attain in 95°C while the drop of coffee will take less time
15. If you dilute a 6 M solution of HCl from 5 mL to 50mL, what is the concentration of this new solution? (M1V1 = M2V2)
A) 1.6 M
B) 0.6 M
C) 8.6 M
D) 0.006 M
Answer:
B) 0.6M
Explanation:
I apologize in advance if it is not correct :l
The (M1V1= M2V2) is given for you to plug in the correct numbers so let's jot this down.
(M1*V1= M2*V2)
so they give us 6M which would be our (M1), from this we can also conclude that 5mL is also V1; ( if you notice the M1's and V1's are always found next to eachother). This leads us to our 50mL, this would be our V2 because the volume went from 5mL to 50mL. Now lets put this in order based on what we know.
M1= 6M (M1*V1= M2*V2)
V1= 5mL
M2= ?
V2= 50mL
now we plug in what we know into the equation to find the unknown (M2)
(6M*5mL= M2*50mL)
now we could do the long math, but I don't think your on brainly to do the hard way. so lets keep it simple!
We are going to put the 50mL under the (6M*5mL) for division.
[tex]\frac{(6M*5mL)}{(50mL)}[/tex] This is honestly MUCH easier, than manually answering. you just put that in the calculator and it'll give you B) 0.6M
honestly though I might not know what I'm doing cuz im currently doing my test and decided to answer this question ;)
Good Luck!
(Please Help Im blowing most of my points for this)
In earthquake-prone areas, engineers design buildings that are resistant to earthquake damage. Here’s a diagram of an earthquake-resistant building in Japan. Explain how features A, B, and C help protect the building from earthquake damage. In your explanation, describe how you could model each feature using marshmallows and toothpicks.
Answer:
In this earthquake-resistant building, two steel supports in the shape of an X (A) help to reinforce walls. Concrete walls with steel bars in them (B) lessen any rocking movements. Shock absorbers (C) take up some of the building’s kinetic energy during a quake. I could use the toothpicks as the two steel in the shape of an X. The concrete walls and the shock absorbers would be the marshmallows.
Features shown by points A, B & C are reinforce walls, concrete walls and shock absorbers respectively.
What is earthquake?Earthquake is a kind of natural disaster in which an intense shaing of the earth's outermost layer takes place.
According to the image following points we will consider as:
Two steel supports in the shape of an X (A) help to reinforce walls in this earthquake-resistant structure.Any rocking movements are reduced by concrete walls with steel bars (B).During a quake, shock absorbers (C) absorb some of the kinetic energy of the building.We can use the toothpicks in the shape of X as the two steel and concrete walls & the shock absorbers as the marshmallows.
Hence, marshmallows are used as the concrete walls and toothpicks are used as two steel rods.
To know more about earthquake-resistant building, visit the below link:
https://brainly.com/question/15732302
#SPJ2
Which of the following resources is inorganic and renewable
Which of the following organs produce enzymes that help chemical digestion happen?
A liver
B small intestine
C large intestine
D rectum
Answer:
A liver
B small intestine
Which atom contains no neutrons in the nucleus?
WARNING: NO LINKS OR YOU WILL BE REPORTED!!!!!
DON'T PUT IMPROPER ANSWER BECAUSE YOU WILL BE REPORTED!
Answer:
Hydrogen
Explanation:
BECAUSE IT HAS NO NEURTONS!!
A .3 piece of copper is heated and fashioned into a bracelet. The amount of energy transferred by heat to the copper is 63500 J. If the specific heat of copper is 390 J/g degrees celsius, what is the temperature change during this process
Answer:
600k
Explanation:
6300j//390j/g
=600k
Cuando se trata Ca3P2 con agua, los productos son Ca(OH)2 y PH3. Calcular el peso máximo obtenido al reaccionar 2 g de Ca3P2 con 1 g de H2O.
Answer:
0.629 gramos de PH3 es la máxima de cantidad que puede ser producida.
Explanation:
¡Hola!
En este caso, dado que tenemos la siguiente reacción química, la cual se puede balancear directamente:
[tex]Ca_3P_2+6H_2O\rightarrow 3Ca(OH)_2+2PH_3[/tex]
Podemos calcular la masa máxima de cualquier producto, digamos PH3, al comparar la masa de este, que 2 g the Ca3P2 y 1 g de H2O producen por separado y de acuerdo a la estequiometría:
[tex]2gCa_3P_2 *\frac{1molCa_3P_2 }{182.18gCa_3P_2 }*\frac{2molPH_3}{1molCa_3P_2 } *\frac{34gPH_3}{1molPH_3 } =0.747gPH_3\\\\1gH_2O *\frac{1molH_2O }{18.02gH_2O}*\frac{2molPH_3}{6molH_2O} *\frac{34gPH_3}{1molPH_3 } =0.629gPH_3[/tex]
De este modo, infermos que solamente 0.629 gramos the PH3 pueden ser obtenidos al ser el agua el reactivo límite.
¡Saludos!
YALL KNOW WHATS UPPPPP
HAIIIII REEEEEEE
answer this question no links
Answer:
it is b, a stethiscope is the thing they put on your heart
Explanation:
so2+o2 = so3 método de tanteo
Answer:
I dont understand
Explanation:
818191919
Moseley discovered that elements with similar properties occurred at regular intervals when the elements were arranged in order of increasing
Moseley discovered that elements with similar properties occurred at regular intervals when the elements were arranged in order of increasing
" Atomic number "
What is the mass of 1.72 moles of sodium nitrate? Use the periodic table and the polyatomic ion resource.
Answer:
[tex]\boxed {\boxed {\sf 146 \ g \ NaNO_3}}[/tex]
Explanation:
To convert from moles to mass, the molar mass is used. This tells us the grams in 1 mole of a substance.
1. Write FormulaWe know the compound is sodium nitrate.
Sodium: NaNitrate: NO₃Sodium has an oxidation state of +1 and nitrate's is -1. When they bond, sodium gives an electron to nitrate and the charges balance out. We don't need to add any additional subscripts.
Sodium nitrate: NaNO₃2. Calculate Molar MassThe molar mass is found on the Periodic Table. It is the same as the atomic mass, but the units are grams per mole. Look up the values for the individual elements.
Na: 22.9897693 g/mol N: 14.007 g/mol O: 15.999 g/molNotice that in the formula, oxygen has a subscript of 3. We must multiply oxygen's molar mass by 3 before adding the other molar masses.
O₃: 3(15.999 g/mol)= 47.997 g/molNaNO₃= 22.9897693+14.007+ 47.997 = 84.9937693 g/mol3. Calculate MassUse the molar mass as a ratio.
[tex]\frac {84.9937693 \ g \ NaNO_3}{1 \ mol \ NaNO_3}[/tex]
Multiply by the given number of moles: 1.72
[tex]1.72 \ mol \ NaNO_3 *\frac {84.9937693 \ g \ NaNO_3}{1 \ mol \ NaNO_3}[/tex]
The units of moles of sodium nitrate cancel.
[tex]1.72*\frac {84.9937693 \ g \ NaNO_3}{1}[/tex]
[tex]146.1892832 \ g \ NaNO_3[/tex]
4. RoundThe original measurement of moles has 3 significant figures, so our answer must have the same. For the number we found, that is the ones place.
146.1892832The 1 in the tenths place tells us to leave the 6.
[tex]146 \ g \ NaNO_3[/tex]
1.72 moles of sodium nitrate has a mass of approximately 146 grams.
How does the CO2 level affect photosynthesis?
Answer:
Elevated [CO2] increases the availability of carbon in leaves causing greater Rubisco activity and higher rates of photosynthesis. Greater photosynthesis increases the content of non-structural carbohydrates in leaves which can lead to greater starch reserves and increased auxin biosynthesis.
Explanation:
Hope it helps
FOLLOW MY ACCOUNT PLS PLS
Given the data table below, which metal will take the least amount of
energy to increase its temperature?
metal. c(j/gk)
Al. 0.921
Ba. 0.201
Mg. 1.04
Ni. 0.502
K. 0.754
Answer:
Barium
Explanation:
The specific heat of a material is a property defined as the amount of energy required to increase the temperature of 1g of this material in 1°C = 1K
In this way, the metal that takes the least amount of energy to increase its temperature is the metal that has the lowest specific heat.
In the problem, this metal is Barium (Ba = 0.201J/gK)
grams. Number only, rounded to the
One mole of silver weighs
hundredths place (.01) *Y
Answer:
107.87 grams
Explanation:
One mole of silver weighs 107.87 grams .
Many different parts of the brain work together to encode, store, and retrieve information as needed. The diagram below indicates three parts of the human brain that are involved in information storage.
Image courtesy of FDA
Which of these terms best describes the process by which the brain stores information that can be retrieved at a later time?
A.
memory
B.
stimulation
C.
nerve specialization
D.
sensory reception
Please help me
Answer:
Are memories stored in just one part of the brain, or are they stored in many different parts of the brain? Karl Lashley began exploring this problem, about 100 years ago, by making lesions in the brains of animals such as rats and monkeys. He was searching for evidence of the engram: the group of neurons that serve as the “physical representation of memory” (Josselyn, 2010). First, Lashley (1950) trained rats to find their way through a maze. Then, he used the tools available at the time—in this case a soldering iron—to create lesions in the rats’ brains, specifically in the cerebral cortex. He did this because he was trying to erase the engram, or the original memory trace that the rats had of the maze.
Lashley did not find evidence of the engram, and the rats were still able to find their way through the maze, regardless of the size or location of the lesion. Based on his creation of lesions and the animals’ reaction, he formulated the equipotentiality hypothesis: if part of one area of the brain involved in memory is damaged, another part of the same area can take over that memory function (Lashley, 1950). Although Lashley’s early work did not confirm the existence of the engram, modern psychologists are making progress locating it. Eric Kandel, for example, spent decades working on the synapse, the basic structure of the brain, and its role in controlling the flow of information through neural circuits needed to store memories (Mayford, Siegelbaum, & Kandel, 2012).
Many scientists believe that the entire brain is involved with memory. However, since Lashley’s research, other scientists have been able to look more closely at the brain and memory. They have argued that memory is located in specific parts of the brain, and specific neurons can be recognized for their involvement in forming memories. The main parts of the brain involved with memory are the amygdala, the hippocampus, the cerebellum, and the prefrontal cortex
Answer:
memory
Explanation:
for study island
what mass of O2 is needed to completely react with 500 g of Fe
Answer:
solution given:
Explanation:
4Fe +3O2------------>2Fe2O3
4mole. 3mole. 2 mole
224g. 96g. 320g
we have
224 g of fe needed to react completely with 96 g of O2
500g of fe needed to react completely with
96 ×500/224=214.3g of O2
214.3g of O2 is a required answer.
"The mass of [tex]O_{2}[/tex] will be 214.3g to completely react with 500 g of Fe."
What is mass?
A physical body's mass is the amount of matter it contains. It can also use to measure moment of inertia, or the resistance to movement when one net force is exerted. The degree of an object's gravitational pull to other bodies is also determined by its mass. The kilogram is the SI base unit of mass.
The reaction between Fe and [tex]O_{2}[/tex] can be written as:
[tex]4Fe+3O_{2}[/tex] → [tex]2Fe_{2}O_{3}[/tex]
It can be see that 4 mole of iron is reacts with 2 mole of oxygen and its form 2 mole of [tex]2Fe_{2}O_{3}[/tex]
So, 224 g of iron is needed in the reacted with oxygen (96 g).
500 g of iron will be needed = 96× 500/224= 214.3g of [tex]O_{2}[/tex].
To know more about mass click here.
https://brainly.com/question/19694949.
#SPJ2
Atoms are the particles that all matter is made from.
When two or more kinds of atoms combine, they form
A molecules
В pure elements
C the periodic table
D metals
Que representa en la reacción química
Na2SO4(s)+H2O(1)=
Answer: The given reaction is a double displacement reaction.
Explanation:
A chemical reaction equation in which both positive and negative ions of two different reactants are exchanged then it is called a double displacement reaction.
For example, [tex]Na_{2}SO_{4} + H_{2}O \rightarrow H_{2}SO_{4} + Na_{2}O[/tex]
Here, hydrogen ions of [tex]H_{2}O[/tex] are replaced by the sodium ions of [tex]Na_{2}SO_{4}[/tex]. Also, sulfate ion of [tex]Na_{2}SO_{4}[/tex] are replaced by oxygen ion of [tex]H_{2}O[/tex].
Thus, we can conclude that the given reaction is a double displacement reaction.
If a response is towards a stimulus it's described as _______; if a response is away from the stimulus it's described as _____.
Answer: Positive tropism, negative tropism
Explanation:
Stimulus can be define as external and internal agent which generate a response in an organism. If the growth and action is towards the stimulus it is called as positive tropism. If the growth and action is away from the stimulus it is called as negative tropism. Example, the growth of the stem towards the sunlight is called positive tropism whereas the growth of the root away from the sunlight is called negative tropism. Here, sunlight is the stimulus.
Speed is the rate of change of position expressed as _____ traveled per unit of time. A. direction B. meter C. displacement D. distance
Answer. Speed is the rate of change of position expressed as distance travelled per unit of time
give brainliest if right
Answer:
distance
Explanation:
How many molecules are in 0.33 moles of CaCO3?
Which of the following describes a crystal? *
A homogeneous solid
has a highly ordered microscopic structure
has a geometrically regular form
All of the options describe crystals
Answer:
has a highly ordered microscopic structure
Which of the following statements is true?
Mushrooms and algae are part of the fungi group.
Fungi are a special type of plant.
Fungi can feed off both living and dead organisms.
Fungi can make their own food using photosynthesis.
Answer:
Mushroom and algae are part of the fungi group