A tank contains oxygen (O_2) at a pressure of 7.00 atm. What is the pressure in the tank in terms of the following units? torr Express the pressure in torr to three significant figures. Part B lb/ in^2Express the pressure in pounds per square inch to three significant figures. Part c mmHg_gExpress the pressure in millimeters of mercury to three significant figures. Express the pressure in kilopascals to three significant figures.

Answers

Answer 1

The pressure in the tank that contains oxygen (O₂) in different required units is 5,320 torr, 102.87 lb/in², 391.18 mmHg_g, and 709.275 kPa

Conversion of pressure to different unit

To solve this problem, first convert the pressure of oxygen in the tank from atm to all the other required units

Thus;

1 atm = 760 torr

1 atm = 14.696 lb/in²

1 atm = 760 mmHg

1 atm = 101.325 kPa

Pressure in torr

pressure in torr = 7.00 atm × 760 torr/atm

= 5,320 torr

Pressure in pounds per square inch (lb/in²)

pressure in lb/in² = 7.00 atm × 14.696 lb/in²/atm

= 102.87 lb/in²

Pressure in millimeters of mercury (mmHg)

pressure in mmHg = 7.00 atm × 760 mmHg/atm

= 5,320 mmHg

To convert this to mmHg_g, we need to multiply by the ratio of the density of mercury to the density of oxygen at the same temperature and pressure. At room temperature, the density of mercury is approximately 13.6 times greater than the density of oxygen.

Thus;

pressure in mmHg_g = 5,320 mmHg × (1/13.6)

= 391.18 mmHg_g

Pressure in kilopascals (kPa)

pressure in kPa = 7.00 atm × 101.325 kPa/atm

= 709.275 kPa

Therefore, the pressure in the tank in terms of kilopascals is 709.275 kPa, rounded to three significant figures.

Learn more on pressure conversion on https://brainly.com/question/30923484

#SPJ4


Related Questions

solubility of a hypothetical compound, A2B, is 0.131 mol/L A2B (s) <==> 2 A+ (aq) + B-2 (aq) Calculate the Ksp of this compound
What is the pH of a solution prepared by adding 97.42 mL of 0.100 M sodium hydroxide to 60.18 mL of 0.503 M benzoic acid (Kg = 6.14 x 10-5)?

Answers

The Ksp of compound A2B can be calculated using the given solubility expression: A2B (s) <==> 2 A+ (aq) + B-2 (aq). The solubility of A2B is given as 0.131 mol/L. Since there are 2 A+ ions and 1 B-2 ion produced for every A2B molecule that dissolves, the concentration of A+ ions and B-2 ions will both be twice the solubility of A2B. Therefore, the concentration of A+ ions and B-2 ions will be 2 * 0.131 = 0.262 mol/L. The Ksp of A2B can be calculated by multiplying the concentrations of the ions raised to their stoichiometric coefficients: Ksp = [A+]^2 * [B-2] = (0.262)^2 * 0.262 = 0.018 mol^3/L^3.

The solubility product constant (Ksp) of compound A2B is calculated by multiplying the concentrations of the ions raised to their stoichiometric coefficients. In this case, since there are 2 A+ ions and 1 B-2 ion produced for every A2B molecule that dissolves, the concentration of A+ ions and B-2 ions will both be twice the solubility of A2B. Therefore, the concentration of A+ ions and B-2 ions will be 0.262 mol/L. By plugging in these values into the Ksp expression, we can calculate the Ksp of A2B: Ksp = (0.262)^2 * 0.262 = 0.018 mol^3/L^3.

In this case, the main answer is the calculation of the Ksp of compound A2B, which is 0.018 mol^3/L^3. The supporting explanation provides the step-by-step process of how to calculate the Ksp using the given solubility expression and the stoichiometry of the compound.

Know more about ions here:

https://brainly.com/question/30663970

#SPJ11

Explain how the integrated rate law for first order and second order reactions can be used to determine whether the reaction is first or second order.

Answers

By experimentally measuring the concentration of a reactant at different time points and plotting the appropriate form of the integrated rate law, we can determine whether the reaction is first order (linear plot of ln[A]) or second order (linear plot of 1/[A]). The slope of the linear plot can also provide information about the rate constant (k) for the reaction.

The integrated rate law for a chemical reaction describes the relationship between the concentration of a reactant and time for a specific order of reaction. By analyzing the mathematical form of the integrated rate law, we can determine whether a reaction is first order or second order.

For a first-order reaction, the integrated rate law is expressed as:

ln[A]t = -kt + ln[A]0

where [A]t represents the concentration of the reactant A at time t, k is the rate constant, and [A]0 is the initial concentration of A.

In a first-order reaction, plotting ln[A] versus time (t) will yield a straight line with a negative slope. If the plot of ln[A] versus time is linear and the slope remains constant throughout the reaction, it indicates that the reaction follows a first-order rate law.

For a second-order reaction, the integrated rate law is expressed as:

1/[A]t = kt + 1/[A]0

In a second-order reaction, plotting 1/[A] versus time (t) will yield a straight line with a positive slope. If the plot of 1/[A] versus time is linear and the slope remains constant throughout the reaction, it indicates that the reaction follows a second-order rate law.

To know more about mathematical visit:

brainly.com/question/27235369

#SPJ11

Describe the expected relationship given the following pairs of variables. You explanation should discuss how the fwo variables could be compared to each other. 3] a) A player's distance from a dartboard and their score. b) The height of a student and the number of minutes of TV they spend watching each nigh

Answers

A player's distance from a dartboard and their score: It can be observed that there is an inverse relationship between a player's distance from a dartboard and their score. As a player moves closer to the dartboard, their score would increase.

Similarly, as a player moves further away from the dartboard, their score would decrease. Therefore, it can be said that the closer a player is to the dartboard, the higher their score will be.b) The height of a student and the number of minutes of TV they spend watching each night:It cannot be said that there is a clear expected relationship between the height of a student and the number of minutes of TV they spend watching each night.

The two variables cannot be compared to each other because they are not related to each other. They do not have any direct or indirect relationship between them. Therefore, it is not possible to predict how a student's height would affect the number of minutes of TV they watch each night.

To know more about dartboard visit:

https://brainly.com/question/30368759

#SPJ11

Consider the following LP problem: minimize z= −X₁+ X2−2x3, subject to X₁ + X₂ + X3 ≤6, - X₁ + 2x₂ + 3x3 ≤9, X1, X2, X3 ≥0. (a) Solve the problem by the Simplex method. (b) Suppose that the vector c= (-1 1-2) is replaced by (-1 1 −2)+^(2 −1 1), where is a real number. Find optimal solution for all values of 2.

Answers

To solve the given LP problem using the Simplex method, let's go through the steps:

1. Convert the problem into standard form:
  - Introduce slack variables: X₄ and X₅ for the two inequality constraints.
  - Rewrite the objective function: z = -X₁ + X₂ - 2X₃ + 0X₄ + 0X₅.
  - Rewrite the constraints:
    X₁ + X₂ + X₃ + X₄ = 6,
    -X₁ + 2X₂ + 3X₃ + X₅ = 9.
  - Ensure non-negativity: X₁, X₂, X₃, X₄, X₅ ≥ 0.

2. Formulate the initial tableau:
  The initial tableau will have the following structure:

  | Cb   | Xb | Xn | X₄ | X₅ | RHS |
  | ---- | -- | -- | -- | -- | --- |
  | 0    | X₄ | X₅ | X₁ | X₂ | 0   |
  | 6    | 1  | 0  | 1  | 1  | 6   |
  | 9    | 0  | 1  | 0  | 3  | 9   |

3. Perform the Simplex iterations:
  - Select the most negative coefficient in the bottom row as the pivot column. In this case, X₂ has the most negative coefficient.
  - Compute the ratio of the right-hand side to the pivot column for each row. The minimum positive ratio corresponds to the pivot row. In this case, X₄ has the minimum ratio of 6/1 = 6.
  - Perform row operations to make the pivot element 1 and other elements in the pivot column 0. Update the tableau accordingly.
  - Repeat the above steps until there are no negative coefficients in the bottom row.

4. The final tableau will be as follows:

  | Cb | Xb | Xn | X₄ | X₅ | RHS |
  | -- | -- | -- | -- | -- | --- |
  | -3 | X₃ | X₅ | 0  | -1 | -3  |
  | 1  | X₁ | 0  | 1  | 0  | 1   |
  | 3  | X₂ | 1  | 0  | 1  | 3   |

  The optimal solution is X₁ = 1, X₂ = 0, X₃ = 3, with a minimum value of z = -3.

To solve the modified LP problem with the updated objective function c = (-1 1 -2) + λ(2 -1 1):

1. Formulate the initial tableau as before, but replace the coefficients in the objective function with the updated values:
  c = (-1 + 2λ, 1 - λ, -2 + λ).

2. Perform the Simplex iterations as before, but with the updated coefficients.

3. The optimal solution and the minimum value of z will vary with the different values of λ. By solving the updated LP problem for different values of λ, you can find the optimal solution and z for each value.

Learn more about LP problem

https://brainly.com/question/32681497

#SPJ11

Dr. Smith owns a company which is organized as a
coreration. In 2015, the revenue of this company is
$760,000; the business-related expenses are $380,000.
Dr. Smith had his personal expenses of $50,00

Answers

The net income of Dr. Smith's corporation for 2015 was $380,000. This represents the profit earned by the company after deducting business expenses from the revenue. Personal expenses, including Dr. Smith's $50,000, are not factored into the calculation of net income for the corporation.

Dr. Smith owns a company that is organized as a corporation. In 2015, the company generated a revenue of $760,000. The business-related expenses for the same year amounted to $380,000. Additionally, Dr. Smith had personal expenses totaling $50,000.

To determine the company's net income, we need to subtract the business expenses from the revenue. Therefore, the net income can be calculated as follows:

Net Income = Revenue - Business Expenses
Net Income = $760,000 - $380,000
Net Income = $380,000

The net income represents the profit earned by the company after deducting all business-related expenses.

It's important to note that personal expenses, such as Dr. Smith's $50,000, are not considered when calculating the company's net income. Personal expenses are separate from business expenses and do not directly impact the financial performance of the corporation.

Learn more about revenue from the link given below:

https://brainly.com/question/16232387

#SPJ11

What are the coefficients when the reaction below is balanced? Nitrogen dioxide reacts with dihydrogen dioxide to produce nitric acid (nitric acid is HNO3)

Answers

The balanced equation for the reaction between nitrogen dioxide (NO2) and dihydrogen dioxide (H2O2) to produce nitric acid (HNO3) is:

2 NO2 + H2O2 → 2 HNO3

The balanced equation for the reaction between nitrogen dioxide (NO2) and dihydrogen dioxide (H2O2) to produce nitric acid (HNO3) is obtained by ensuring that the number of atoms of each element is equal on both sides of the equation.

In this reaction, we have two nitrogen dioxide molecules (2 NO2) reacting with one dihydrogen dioxide molecule (H2O2) to produce two molecules of nitric acid (2 HNO3).

To balance the equation, we need to adjust the coefficients in front of each compound to achieve an equal number of atoms on both sides. The balanced equation is:

2 NO2 + H2O2 → 2 HNO3

This equation indicates that two molecules of nitrogen dioxide react with one molecule of dihydrogen dioxide to produce two molecules of nitric acid.

TO learn more about balanced equation visit:

https://brainly.com/question/11904811

#SPJ11

5. Verify that the following functions u is harmonic, and find its analytic function f(z)=u+iv, for f(0)=0 u(x, y) = x² - y² + xy

Answers

The analytic function f(z) = (1/2)z² + xy - (1/2)x² satisfies the given conditions, with f(0) = 0.

To verify that the function u(x, y) = x² - y² + xy is harmonic, we need to check if it satisfies Laplace's equation:

∇²u = ∂²u/∂x² + ∂²u/∂y² = 0

Let's compute the second partial derivatives:

∂²u/∂x² = 2

∂²u/∂y² = -2

∇²u = ∂²u/∂x² + ∂²u/∂y² = 2 + (-2) = 0

Since ∇²u = 0, we can conclude that the function u(x, y) = x² - y² + xy is indeed harmonic.

To find the analytic function f(z) = u + iv, we can integrate the given function u(x, y) to obtain v(x, y), and then express the result in terms of the complex variable z = x + iy.

Given:

u(x, y) = x² - y² + xy

To find v(x, y), we integrate the partial derivative of u with respect to y:

∂v/∂y = ∂u/∂x = 2x + y

v(x, y) = ∫(2x + y) dy = 2xy + (1/2)y² + C(x)

Here, C(x) represents a constant of integration that may depend on x.

Now, we express v(x, y) in terms of the complex variable z = x + iy:

v(x, y) = 2xy + (1/2)y² + C(x)

v(z) = 2xz + (1/2)(z - ix)² + C(x)

v(z) = 2xz + (1/2)(z² - 2ixz + i²x²) + C(x)

v(z) = 2xz + (1/2)(z² - 2ixz - x²) + C(x)

v(z) = xz + (1/2)z² - ixz - (1/2)x² + C(x)

Now, let's find the constant C(x) by using the given condition f(0) = 0:

v(0) = 0

0 = 0 + 0 - 0 - 0 + C(0)

C(0) = 0

Therefore, the analytic function f(z) = u(x, y) + iv(x, y) is given by:

f(z) = (x² - y² + xy) + i(xz + (1/2)z² - ixz - (1/2)x²)

Simplifying the expression:

f(z) = x² - y² + xy + ixz + (1/2)z² - ixz - (1/2)x²

f(z) = (1/2)z² + xy - (1/2)x²

Thus, the analytic function f(z) = (1/2)z² + xy - (1/2)x² satisfies the given conditions, with f(0) = 0.

To know more about partial derivatives, visit:

https://brainly.com/question/28750217

#SPJ11

(b) Describe the following essential contract terms in the construction contract document: (i) Conditions of contract (ii) Standard form of contract (iii) Specifications of works

Answers

Construction contract documents are essential legal instruments used in building contracts to set terms, conditions, and obligations between two or more parties.

It defines the contractual relationship between the parties and helps reduce the likelihood of disputes or misunderstandings.  This document specifies critical terms and provisions that are essential in any building project.

Conditions of contract: Conditions of contract refer to the terms and obligations set out in the building contract, which govern the relationship between the contractor and the client.

The standard of work to be done, payment, and any other requirements essential to the project. The conditions of contract are aimed at ensuring that both parties understand their rights, obligations, and responsibilities in the contract.  

 These agreements are usually created by professional organizations or the government, which have an interest in standardizing the terms and conditions of contracts within the industry.

The objective of a standard form of the contract is to make the contract process more efficient and more straightforward while ensuring that both parties' interests are protected.  Specifications of works: Specifications of works are detailed documents that describe the type and quality of work to be performed in a construction project.

To know more about obligations visit:

https://brainly.com/question/32907342

#SPJ11

Which of these is NOT a required device/information for the horizontal angle measurement? a) Reference line/point b) Theodolite c) Reflector d) All of the given answer e) Direction of turning f) None

Answers

Correct option is d) All of the given answers.all are required for horizontal angle measurement, including a reference line/point, theodolite, reflector, and direction of turning.

The horizontal angle measurement requires several devices and information for accurate readings. These include a reference line or point, a theodolite (an instrument used for measuring angles), a reflector (to reflect the line of sight), and the direction of turning. Each of these elements plays a crucial role in the measurement process. The reference line or point provides a fixed starting point for the measurement, allowing for consistency and accuracy.

The theodolite is the primary instrument used to measure angles and provides the necessary precision for horizontal angle measurements. The reflector reflects the line of sight from the theodolite, making it easier to measure angles. Lastly, the direction of turning indicates the direction in which the theodolite is rotated to measure the horizontal angle. Therefore, all of the given answers (a, b, c, and e) are required for horizontal angle measurement.

Learn more about theodolite

brainly.com/question/1619648

#SPJ11

2. Draw an example of a system of equations (of conic sections) which has a. four real solutions ( 3 pts.) b. no real solutions (3 pts.) Inis Photo by Unknown Author is licensed under CC

Answers

The given system of equations satisfies the condition for having no real solutions.

On solving the system of equations, we get four real solutions (which means both x and y are real) for the system of equations. Therefore, the given system of equations satisfies the condition for having four real solutions.

b) Example of a system of equations (of conic sections) which has no real solutions:

Consider the following system of equations, consisting of two equations:

On solving the system of equations, we find that both x and y are not real, which means that the given system of equations has no real solutions.

To know more about consisting visit:

https://brainly.com/question/30321733

#SPJ11

A steel bar with a diameter of 16 mm and a length of 450 mm was put into a test for its tensile strength and it breaks after it reaches to a tensile load of 216.7 kN. After it breaks, it was observed that the length of the steel bar is eighth-thirds the half of its original length, while, the length of the other steel bar is 26.5% of one-third the length of the other steel bar.
What is the tensile strength of the steel bar after it breaks? (in megapascal)

Answers

The tensile strength of the steel bar, which initially had a diameter of 16 mm and a length of 450 mm, was tested until it broke under a load of 216.7 kN. The tensile strength of the steel bar after it breaks is approximately 144.3 MPa.

To determine the tensile strength after the steel bar breaks, we need to calculate the original cross-sectional area of the bar using its diameter. The diameter of the bar is 16 mm, so its radius is 8 mm (or 0.008 m). The original cross-sectional area can be calculated using the formula for the area of a circle: A = πr².

Plugging in the values, we find

A = π(0.008)²

A = 0.00020106 m²

Next, we calculate the original stress applied to the bar using the tensile load of 216.7 kN. Stress is defined as force divided by area, so the stress is given by σ = F/A, where F is the force and A is the cross-sectional area. Converting the force from kilonewtons to newtons, we have

F = 216.7 kN

F = 216,700 N

Substituting the values, we get

σ = 216,700 N / 0.00020106 m²

σ = 1,078,989,272.96 Pa.

Finally, to convert the stress to megapascals (MPa), we divide by 1,000,000. Therefore, the tensile strength of the steel bar after it breaks is approximately 1,078.99 MPa.

To learn more about tensile strength refer:

https://brainly.com/question/32937595

#SPJ11

The tensile strength of the steel bar after it breaks is 14.4 MPa.

To calculate the tensile strength, we first need to find the original cross-sectional area of the steel bar. The diameter of the steel bar is given as 16 mm, which means the radius is half of that, i.e., 8 mm or 0.008 m. The cross-sectional area of a circular bar can be calculated using the formula:

[tex]\[ A = \pi \times r^2 \][/tex]

Substituting the values, we get:

[tex]\[ A = \pi \times (0.008)^2 \approx 0.00020106 \, \text{m}^2 \][/tex]

Next, we convert the tensile load from kilonewtons to newtons:

[tex]\[ \text{Tensile Load} = 216.7 \times 1000 \, \text{N} \][/tex]

Now, we can calculate the tensile strength:

[tex]\[ \text{Tensile Strength} = \frac{\text{Tensile Load}}{\text{Cross-sectional Area}} = \frac{216.7 \times 1000}{0.00020106} \approx 1,077,952 \, \text{Pa} \][/tex]

Finally, converting the tensile strength to megapascals:

[tex]\[ \text{Tensile Strength} = 1,077,952 \, \text{Pa} = 1,077,952 \, \text{MPa} \approx 14.4 \, \text{MPa} \][/tex]

Therefore, the tensile strength of the steel bar after it breaks is approximately 14.4 MPa.

To learn more about tensile strength refer:

https://brainly.com/question/22093788

#SPJ11

Use variation of parameters and to find a particular solution and then obtain the general solution of t²(d²y/dt²)-4t(dy/dt)+6y=6t^4- t²

Answers

The general solution of the given differential equation is the sum of the complementary and particular solutions:

 y = c₁t^² + c₂t^³ - t^4 + (t^5/6 + t^4/36).

To solve the given differential equation t^²(d^²y/dt^²) - 4t(dy/dt) + 6y = 6t^4 - t^² using the method of variation of parameters, we first need to find the complementary solution, and then the particular solution.

   Complementary Solution:

   First, we find the complementary solution to the homogeneous equation t^²(d^²y/dt^²) - 4t(dy/dt) + 6y = 0. Let's assume the solution has the form y_c = t^m.

   Substituting this into the differential equation, we get:

   t^²(m(m-1)t^(m-2)) - 4t(mt^(m-1)) + 6t^m = 0

Simplifying, we have:

m(m-1)t^m - 4mt^m + 6t^m = 0

(m^2 - 5m + 6)t^m = 0

Setting the equation equal to zero, we get the characteristic equation:

m^2 - 5m + 6 = 0

Solving this quadratic equation, we find the roots m₁ = 2 and m₂ = 3.

The complementary solution is then:

y_c = c₁t^² + c₂t^³

   Particular Solution:

   Next, we find the particular solution using the method of variation of parameters. Assume the particular solution has the form:

   y_p = u₁(t)t^² + u₂(t)t^³

Differentiating with respect to t, we have:

dy_p/dt = (2u₁(t)t + t^²u₁'(t)) + (3u₂(t)t^² + t^³u₂'(t))

Taking the second derivative, we get:

d^²y_p/dt^² = (2u₁'(t) + 2tu₁''(t) + 2u₁(t)) + (6u₂(t)t + 6t^²u₂'(t) + 6tu₂'(t) + 6t³u₂''(t))

Substituting these derivatives back into the original differential equation, we have:

t^²[(2u₁'(t) + 2tu₁''(t) + 2u₁(t)) + (6u₂(t)t + 6t^²u₂'(t) + 6tu₂'(t) + 6t^³u₂''(t))] - 4t[(2u₁(t)t + t^²u₁'(t)) + (3u₂(t)t^² + t^³u₂'(t))] + 6[u₁(t)t^² + u₂(t)t^³] = 6t^4 - t^²

Simplifying and collecting terms, we obtain:

2t^²u₁'(t) + 2tu₁''(t) - 4tu₁(t) + 6t^³u₂''(t) + 6t^²u₂'(t) = 6t^4

To find the particular solution, we solve the system of equations:

2u₁'(t) - 4u₁(t) = 6t^²

6u₂''(t) + 6u₂'(t) = 6t^2

Solving these equations, we find:

u₁(t) = -t^²

u₂(t) = t^²/6 + t/36

Therefore, the particular solution is:

y_p = -t^²t^² + (t^²/6 + t/36)t^³

y_p = -t^4 + (t^5/6 + t^4/36)

   General Solution:

   Finally, the general solution of the given differential equation is the sum of the complementary and particular solutions:

   y = y_c + y_p

   y = c₁t^² + c₂t^³ - t^4 + (t^5/6 + t^4/36)

This is the general solution to the differential equation.

To learn more about differential equation visit: https://brainly.com/question/31583235

#SPJ11

A soil sample has a mass of 2290 gm and a volume of 1.15 x 10-3 m3, after drying, the mass of the sample 2035 gm, Gs for the soil is 268, Determine: 1. bulk density 2. water content 3. void ratio 4. Porosity 5. Degree of saturation

Answers

Degree of saturation is an important soil parameter that is used to determine other soil properties, such as hydraulic conductivity and shear strength.

Bulk density is the ratio of the mass of soil solids to the total volume of soil. Bulk density can be calculated using the following equation:

Bulk density = Mass of soil solids / Total volume of soil Bulk density can also be determined by using the following formula:

ρb = (M1-M2)/V

where ρb is the bulk density of the soil, M1 is the initial mass of the soil, M2 is the mass of the dry soil, and V is the total volume of the soil.

ρb = (2290 – 2035) / 1.15 x 10-3 ρb

= 22.09 kN/m3

Water content is the ratio of the mass of water to the mass of soil solids in the sample.

Water content can be determined using the following equation:

Water content = (Mass of water / Mass of soil solids) x 100%

Water content = [(2290 – 2035) / 2035] x 100%

Water content = 12.56%

Void ratio is the ratio of the volume of voids to the volume of solids in the sample. Void ratio can be determined using the following equation:

Void ratio = Volume of voids / Volume of solids

Void ratio = (Total volume of soil – Mass of soil solids) / Mass of soil solids

Void ratio = (1.15 x 10-3 – (2290 / 268)) / (2290 / 268)

Void ratio = 0.919

Porosity is the ratio of the volume of voids to the total volume of the sample.

Porosity can be determined using the following equation:

Porosity = Volume of voids / Total volume

Porosity = (Total volume of soil – Mass of soil solids) / Total volume

Porosity = (1.15 x 10-3 – (2290 / 268)) / 1.15 x 10-3

Porosity = 0.888

Degree of saturation is the ratio of the volume of water to the volume of voids in the sample.

Degree of saturation can be determined using the following equation:

Degree of saturation = Volume of water / Volume of voids

Degree of saturation = (Mass of water / Unit weight of water) / (Total volume of soil – Mass of soil solids)

Degree of saturation = [(2290 – 2035) / 9.81] / (1.15 x 10-3 – (2290 / 268))

Degree of saturation = 0.252.

In geotechnical engineering, the bulk density of a soil sample is the ratio of the mass of soil solids to the total volume of soil.

In other words, bulk density is the weight of soil solids per unit volume of soil.

It is typically measured in units of kN/m3 or Mg/m3. Bulk density is an important soil parameter that is used to calculate other soil properties, such as porosity and void ratio.

Water content is a measure of the amount of water in a soil sample. It is defined as the ratio of the mass of water to the mass of soil solids in the sample.

Water content is expressed as a percentage, and it is an important soil parameter that is used to determine other soil properties, such as hydraulic conductivity and shear strength.

Void ratio is the ratio of the volume of voids to the volume of solids in the sample.

Void ratio is an important soil parameter that is used to calculate other soil properties, such as porosity and hydraulic conductivity. It is typically measured as a dimensionless quantity.

Porosity is a measure of the amount of void space in a soil sample. It is defined as the ratio of the volume of voids to the total volume of the sample.

Porosity is an important soil parameter that is used to calculate other soil properties, such as hydraulic conductivity and shear strength.

Degree of saturation is a measure of the amount of water in a soil sample relative to the total volume of voids in the sample. It is defined as the ratio of the volume of water to the volume of voids in the sample.

Degree of saturation is an important soil parameter that is used to determine other soil properties, such as hydraulic conductivity and shear strength.

To know more about volume visit :

https://brainly.com/question/28058531

#SPJ11

The stream function for a flow is given as: Ψ=x^2+y^2−2xy a) What are the expressions for velocity in the x and y directions? b) Is the flow incompressible? c) Determine the magnitude of flow rate in between streamlines passing through (1,1) and (3,2)

Answers

The magnitude of flow rate in between directions passing through (1,1) and (3,2) is 2ρ.

The flow is incompressible when the mass flow rate is constant. Let us find out whether this flow is incompressible or not, using the continuity equation.The continuity equation in two dimensions is given as:

∂ρ/∂t + ∂(ρVx)/∂x + ∂(ρVy)/∂y = 0

where ρ is the density, Vx is the velocity in the x direction, and Vy is the velocity in the y direction.

∂ρ/∂t = 0

because the density is constant.

Let's find out whether the other terms in the equation sum up to zero or not.

∂(ρVx)/∂x + ∂(ρVy)/∂y = 0

Vx = 2y - 2x and

Vy = -2x + 2y

Substituting these values in the continuity equation we get,

∂(ρVx)/∂x + ∂(ρVy)/∂y = 2ρ

The terms do not sum up to zero. Therefore, this flow is not incompressible. c) The flow rate in between streamlines passing through (1,1) and (3,2) is given by,

Q = ρ(VxΔy)

where Δy is the distance between the two streamlines and ρ is the density.

Q = ρ(VxΔy) = ρ

((2(2) - 2(1))(2 - 1)) = 2ρ

To know more about directions  visit:

https://brainly.com/question/32955554

#SPJ11

Let F be any vector field of the form F=f(x)i+g(y)j+h(z)k and let G be any vector field of the form G=f(y,z)i+g(x,z)j+h(x,y)k. Indicate whether the following statements are true or false by placing "T" or "F" to the left of the statement. 1. F is irrotational 2. G is irrotational 3. G is incompressible 4. F is incompressible

Answers

The truth values of the given statements are 1.F is irrotational is False 2. G is irrotational is True 3. G is incompressible is True 4. F is incompressible is False

Let F be any vector field of the form F=f(x)i+g(y)j+h(z)k and let G be any vector field of the form G=f(y,z)i+g(x,z)j+h(x,y)k.

To check whether the given statements are true or false, we need to find the curl and divergence of the vector fields.

1. F is irrotationalCurl of F is given as,curl F = ∂h/∂y - ∂g/∂z i + ∂f/∂z - ∂h/∂x j + ∂g/∂x - ∂f/∂y k

Since the curl of the vector field F is non-zero, it is not irrotational.

Hence, the given statement is false.

2. G is irrotational Curl of G is given as, curl G = ∂h/∂y - ∂g/∂z i + ∂f/∂z - ∂h/∂x j + ∂g/∂x - ∂f/∂y k

Since the curl of the vector field G is zero, it is irrotational.

Hence, the given statement is true.

3. G is incompressible Divergence of G is given as, div G = ∂f/∂x + ∂g/∂y + ∂h/∂z

Since the divergence of the vector field G is zero, it is incompressible.

Hence, the given statement is true.

4. F is incompressible Divergence of F is given as, div F = ∂f/∂x + ∂g/∂y + ∂h/∂z

Since the divergence of the vector field F is non-zero, it is not incompressible.

Hence, the given statement is false.

The truth values of the given statements are:1. False2. True3. True4. False

Learn more about truth values

https://brainly.com/question/29137731

#SPJ11

Set up, but do not evaluate, the integral for the surface area of the solid obtained by rotating the curve y-6ze-He interval 2 556 about the line a=-4 Set up, but do not evaluate, the integral for the surface area of the solid obtained by rotating the curve y-dee on the interval 2 556 about the sine p 1-0 Note. Don't forget the afferentials on the integrands Note in order to get creat for this problem all answers must be correct preview

Answers

The integral for the the surface area is [tex]\int\limits^6_2 {6xe^{-14x}} \, dx[/tex]

How to set up the integral for the surface area

From the question, we have the following parameters that can be used in our computation:

[tex]y = 6xe^{-14x}[/tex]

Also, we have

The line x = -4

The interval is given as

2 ≤ x ≤ 6

For the surface area from the rotation around the region bounded by the curves, we have

Area = ∫[a, b] [f(x)] dx

This gives

[tex]Area = \int\limits^6_2 {6xe^{-14x}} \, dx[/tex]

Hence, the integral for the surface area is [tex]\int\limits^6_2 {6xe^{-14x}} \, dx[/tex]

Read more about area at

https://brainly.com/question/32094709

#SPJ1

(i) Show that the equation (3x²y²-10xy²)dx + (2x³y-10x²y)dy=0 is an exact equation. (ii) Then, determine the general solution from the given differential equation.

Answers

In order to show that the equation[tex](3x²y²-10xy²)dx + (2x³y-10x²y)dy=0[/tex] is an exact equation, we have to check whether its coefficients are the partial derivatives of some function of two variables f(x,y).

Taking the partial derivative of[tex](3x²y²-10xy²)[/tex] with respect to y,

we get: [tex]∂/∂y(3x²y²-10xy²) = 6x²y - 10xy[/tex]

Taking the partial derivative of [tex](2x³y-10x²y)[/tex] with respect to x,

we get: [tex]∂/∂x(2x³y-10x²y) = 6x²y - 20xy,[/tex]

the equation is an exact equation.(ii)

To determine the general solution from the given differential equation,

we have to find the function f(x,y)

such that: [tex]∂f/∂x = 3x²y²-10xy²∂f/∂y = 2x³y-10x²y[/tex]

Integrating the first equation with respect to x,

we get:[tex]f = x³y² - 5x²y² + g(y)[/tex]

Taking the partial derivative of f with respect to y,

we get: [tex]∂f/∂y = 2x³y - 10x²y + g'(y)[/tex]

Comparing this with the second equation, we get:

g'(y) = 0,

g(y) = C, where C is a constant. The general solution of the differential equation is given by:  [tex]x³y² - 5x²y² + C = 0,[/tex] where C is a constant.

To know more about coefficients visit:

https://brainly.com/question/1594145

#SPJ11

Let f: RR and g: R→ R be piecewise differentiable functions that are integrable. Given that the Fourier transform of f is f(w), and the Fourier transform of g is g(w) = f(w)f(w + 1), show that g(t) = f(r)e-¹7 f(t - 7)dr. 8

Answers

Given that the Fourier transform of f is f(w), and the Fourier transform of g is g(w) = f(w)f(w + 1) then,  [tex]g(t) = ∫[0,1] f(r)e^(-1/7)f(t-7)dr[/tex]

To show that g(t) = [tex]f(r)e^(-1/7)f(t-7)dr[/tex], we need to carefully analyze the given information. The Fourier transform of g(w) is defined as the product of the Fourier transforms of f(w) and f(w+1). Let's break down the steps to arrive at the desired expression.

Apply the  trainverse Fouriernsform to g(w) to obtain g(t). This operation converts the function from the frequency domain (w) to the time domain (t).

By definition, the inverse Fourier transform of g(w) can be expressed as:

g(t) = [tex](1/2π) ∫[-∞,+∞] g(w) e^(iwt) dw[/tex]

Substitute g(w) with f(w)f(w+1) in the above equation:

g(t) = [tex](1/2π) ∫[-∞,+∞] f(w)f(w+1) e^(iwt) dw[/tex]

Rearrange the terms to separate f(w) and f(w+1):

g(t) = (1/2π) ∫[-∞,+∞] f(w) e^(iwt) f(w+1) [tex]e^(iwt) dw[/tex]

Apply the Fourier transform properties to obtain:

g(t) = (1/2π) ∫[-∞,+∞] f(w) [tex]e^(iwt)[/tex]dw ∫[-∞,+∞] f(r) [tex]e^(iw(t-1))[/tex] dr

Simplify the exponential terms in the integrals:

g(t) = f(t) ∫[-∞,+∞] f(r) [tex]e^(-iwr)[/tex] dr

Change the variable of integration from w to -r in the second integral:

g(t) = f(t) ∫[+∞,-∞] [tex]f(-r) e^(i(-r)t)[/tex]dr

Change the limits of integration in the second integral:

g(t) =[tex]f(t) ∫[-∞,+∞] f(-r) e^(irt) dr[/tex]

Apply the definition of the Fourier transform to the integral:

g(t) = [tex]f(t) f(t)^(*) = |f(t)|^2[/tex]

Finally, since the magnitude squared of a complex number is equal to the product of the number with its conjugate, we can write:

g(t) = [tex]f(t)f(t)^(*) = f(r)e^(-1/7)f(t-7)dr[/tex]

Learn more about Fourier transform

brainly.com/question/1597221

#SPJ11

Circle O is represented by the equation (x+7)² + (y + 7)² = 16. What is the length of the radius of circle O?
OA. 3
OB. 4
O c. 7
O D. 9
OE. 16

Answers

Circle O is represented by the equation (x+7)² + (y + 7)² = 16. The length of the radius of Circle O is 4.

The equation of Circle O, (x+7)² + (y+7)² = 16, is in the standard form of a circle equation: (x - h)² + (y - k)² = r². Comparing it to the given equation, we can determine the values of h, k, and r.

In the given equation:

Center coordinates: (-7, -7) → h = -7, k = -7

Radius squared: 16 → r² = 16

To find the length of the radius, we need to take the square root of r²:

r = √(16)

Calculating the square root, we get:

r = 4

Therefore, the length of the radius of Circle O is 4.

Looking at the answer options, we see that the correct answer is Option B which is equal to 4.

The equation of a circle in the standard form (x - h)² + (y - k)² = r² represents a circle with center (h, k) and radius r. By comparing the given equation to the standard form, we can extract the values of h, k, and r. Taking the square root of r² gives us the length of the radius, which in this case is 4.

For more such questions on Circle, click on:

https://brainly.com/question/28162977

#SPJ8

During a storm, the rates of rainfall observed at a frequency of 15 min for one hour are 12.5, 17.5, 22.5 and 7.5 cm/h. If phi-index is 7.5 cm/h, calculate the total runoff.

Answers

The total runoff during the storm is 52.5 centimeters per hour, which is calculated by summing up the rates of rainfall observed at a frequency of 15 minutes for one hour, including 12.5, 17.5, 22.5, and 7.5 centimeters per hour.

To calculate the total runoff during the storm, we need to sum up the rates of rainfall observed at a frequency of 15 minutes for one hour. The rates of rainfall recorded are 12.5, 17.5, 22.5, and 7.5 cm/h. Adding these values together, we get a total of 60 cm/h. This represents the total amount of rainfall that contributes to the runoff during the storm.

However, we also need to consider the phi-index, which is the minimum rate at which water infiltrates into the soil. In this case, the phi-index is given as 7.5 cm/h. This means that any rainfall above this rate will contribute to the total runoff, while rainfall at or below the phi-index will be absorbed by the soil.

To calculate the total runoff, we subtract the phi-index from the sum of the rainfall rates.

Total runoff = (12.5 + 17.5 + 22.5 + 7.5) - 7.5 = 60 - 7.5 = 52.5 cm/h.

Therefore, the total runoff during the storm is 52.5 cm/h.

Learn more about Runoff

brainly.com/question/28147620

#SPJ11

PLS GIVE ANSWERS TO ALL QUESTIONS

Answers

I’m would like to help but I don’t see any questions present… did you forget to provide a photo??

Problem 3. (10 points) Evaluate the line integral [ (2³y. (x³y + 4x + 6) dy, where C is the portion of the curve y = x³ that joins the point A = (-1,-1) to the point B = (1, 1).

Answers

The line integral of the given vector field along the curve joining points A = (-1,-1) to B = (1,1) is 10. This indicates the total "flow" of the vector field along the curve C.

To evaluate the line integral, we need to parametrize the curve C, which is given by y = x³. We can express the parametric form of the curve as r(t) = (t, t³), where -1 ≤ t ≤ 1.

Next, we calculate the differential of y with respect to t: dy = 3t² dt. Substituting this into the given vector field, we get:

F = (2³y) * (x³y + 4x + 6) dy

= (2³t³) * (t³(t³) + 4t + 6) * 3t² dt

= 24t^7 + 12t^5 + 6t³ dt

Now, we can evaluate the line integral using the parametric form of the curve:

∫C F · dr = ∫[from -1 to 1] (24t^7 + 12t^5 + 6t³) dt

Evaluating this integral, we get the value of the line integral as 10.

In summary, the line integral of the given vector field along the curve joining points A = (-1,-1) to B = (1,1) is 10. This indicates the total "flow" of the vector field along the curve C.

Learn more about  vector here: brainly.com/question/30508591

#SPJ11

Let u = (1,2,-1) and (0,2,-4) be vectors in R3.
Part(a) [3 points] If P(3, 4, 5) is the terminal point of the vector 3u, then what is its initial point? Show your work.
Part(b) [4 points] Find ||u||2v - (v. u)u.
Part (c) [4 points] Find vectors x and y in R³ such that u = x + y where x is parallel to v and y is orthogonal to V.
Hint: Consider orthogonal projection

Answers

a). The initial point of the vector 3u is (0, -2, 8).

b). ||u||²v - (v · u)u = (-10, -8, -14).

c). x = (0, 0.8, -1.6) and y = (1, 1.2, 0.6) are the vectors in R³ such that u = x + y, where x is parallel to v and y is orthogonal to v.

Part (a):

To find the initial point of the vector 3u, we need to subtract 3u from the terminal point P(3, 4, 5).

Initial point = P - 3u

Initial point = (3, 4, 5) - 3(1, 2, -1)

Initial point = (3, 4, 5) - (3, 6, -3)

Initial point = (3 - 3, 4 - 6, 5 - (-3))

Initial point = (0, -2, 8)

Therefore, the initial point of the vector 3u is (0, -2, 8).

Part (b):

To find ||u||²v - (v · u)u, we need to perform the following calculations:

||u||² = (1² + 2² + (-1)²) = 6

(v · u) = (0 * 1) + (2 * 2) + (-4 * (-1)) = 10

Substituting the values into the equation:

||u||²v - (v · u)u = 6v - 10u

Since v and u are given as (0, 2, -4) and (1, 2, -1) respectively, we can substitute these values:

6v - 10u = 6(0, 2, -4) - 10(1, 2, -1)

= (0, 12, -24) - (10, 20, -10)

= (0 - 10, 12 - 20, -24 + 10)

= (-10, -8, -14)

Therefore, ||u||²v - (v · u)u = (-10, -8, -14).

Part (c):

To find vectors x and y in R³ such that u = x + y, where x is parallel to v and y is orthogonal to v, we can use the concept of orthogonal projection.

We can express u as the sum of two vectors: x and y.

u = x + y

Where x is the projection of u onto v and y is the orthogonal component of u to v.

The projection of u onto v can be calculated as:

x = ((u · v) / ||v||²) * v

Substituting the given values:

x = ((1 * 0) + (2 * 2) + (-1 * (-4))) / ((0² + 2² + (-4)²)) * (0, 2, -4)

= (8 / 20) * (0, 2, -4)

= (0, 0.8, -1.6)

To find y, we subtract x from u:

y = u - x

= (1, 2, -1) - (0, 0.8, -1.6)

= (1 - 0, 2 - 0.8, -1 - (-1.6))

= (1, 1.2, 0.6)

Therefore, x = (0, 0.8, -1.6) and y = (1, 1.2, 0.6) are the vectors in R³ such that u = x + y, where x is parallel to v and y is orthogonal to v.

To know more about vector click-

https://brainly.com/question/31265178

#SPJ11

several fractions are collected in small test tubes and each tube is analyzed by tlc. Tubes that contained the same substance according to tlc are combined. For the ferrocene, only two large fractions are collected. Explain why collecting several small fractions is unnecessary for the ferrocene reaction.?

Answers

the high degree of separation and distinct behavior of ferrocene on the TLC plate make it unnecessary to collect several small fractions. This saves time and effort during the purification process.

Collecting several small fractions is unnecessary for the ferrocene reaction because ferrocene is a compound that has a high degree of purity and a distinct separation behavior on the TLC plate.

When performing thin layer chromatography (TLC), the compounds in the mixture will move at different rates on the plate due to their different polarities. This allows for the separation and identification of individual compounds.

In the case of ferrocene, it exhibits a high degree of separation on the TLC plate, resulting in only two large fractions. This means that the compound is distinct and easily identifiable, making it unnecessary to collect several small fractions.

The distinct separation behavior of ferrocene can be attributed to its unique structure and properties. Ferrocene is a sandwich complex consisting of two cyclopentadienyl rings bound to a central iron atom. This structure imparts specific characteristics to ferrocene, including its high stability and distinct separation behavior.

By analyzing the TLC plate, chemists can easily determine which fractions contain ferrocene and combine them into two large fractions. This simplifies the purification process and reduces the amount of work required.

In summary, the high degree of separation and distinct behavior of ferrocene on the TLC plate make it unnecessary to collect several small fractions. This saves time and effort during the purification process.

To learn more about thin layer chromatography (TLC):

https://brainly.com/question/32897594

#SPJ11

What would be the cost of a Big Mac in Azerbaijan in US dollars (convert the price in bolivar to US dollars)?
= 4.7/1.7
= $2.76 would be the cost of a Big Mac
he cost of a Big Mac in the US is $5.15. If the law of one price holds for the Big Mac in the United States and Azerbaijan, what would be the exchange rate between the manat and the dollar?
=4.7/1.7
= $.91 manat/dollar
c. Compare the actual exchange rate between the bolivar and the dollar of 1.7 manat/$1 to the exchange rate suggested by the law of one price in part b. Is the manat overvalued or undervalued according to our application of the law of one price? (6 points)

Answers

The cost of a Big Mac in Azerbaijan in US dollars would be $2.76 and The exchange rate between the Azerbaijani manat and the US dollar would be approximately 0.91 manat per dollar.

To calculate the cost of a Big Mac in US dollars in Azerbaijan, we need to convert the price in Azerbaijani manat (AZN) to US dollars (USD) using the exchange rate. If the price of a Big Mac in Azerbaijan is 4.7 AZN and the exchange rate is 1.7 AZN/USD, we can calculate the cost in US dollars as follows:

Cost in USD = Price in AZN / Exchange rate

= 4.7 AZN / 1.7 AZN/USD

≈ $2.76 USD

Therefore, the cost of a Big Mac in Azerbaijan in US dollars would be approximately $2.76.

Given that the cost of a Big Mac in the US is $5.15, we can use the law of one price to determine the exchange rate between the Azerbaijani manat (AZN) and the US dollar (USD). By equating the cost of a Big Mac in both countries, we can set up the following equation:

Price in Azerbaijan (in AZN) = Price in the US (in USD)

4.7 AZN = $5.15 USD

To find the exchange rate, we can rearrange the equation as follows:

Exchange rate = Price in Azerbaijan / Price in the US

= 4.7 AZN / $5.15 USD

≈ 0.91 AZN/USD

Therefore, the exchange rate between the Azerbaijani manat and the US dollar would be approximately 0.91 manat per dollar.

Learn more about exchange rate: https://brainly.com/question/10187894

#SPJ11

The temperature of the organic phase increase the extraction rate, is this statement true? Validate your answer.

Answers

The temperature of the organic phase increase the extraction rate is a true statement.

Organic solvents are widely used for the extraction of natural products. The temperature of the organic phase is an important factor that affects the rate of extraction. The increase in temperature of the organic phase leads to an increase in the extraction rate.This can be explained by the fact that an increase in temperature will cause the solubility of the compound in the organic solvent to increase. This increases the driving force for the transfer of the compound from the aqueous phase to the organic phase. As a result, the extraction rate is increased.

In summary, the statement "The temperature of the organic phase increase the extraction rate" is true.

To know more about extraction rate, click here

https://brainly.com/question/12271319

#SPJ11

An electrolytic cell was run at a constant current of 2.10 A. The cell converted copper 2+ lons in solution to 4.10 g of solid copper at the cathode. The time needed to deposit the copper solid at the cathode was hr. Record your final answer to two decimal places (ie. 1.12) and do not include units in your final answer.

Answers

The time needed to deposit 4.10 g of solid copper at the cathode in an electrolytic cell running at a constant current of 2.10 A is approximately 3.14 hours.

Given:

Current, I = 2.10 A

Time, t = ?

Amount of solid copper, m = 4.10 g

Charge on 1 electron, e = 1.6 × 10⁻¹⁹ C

We know that the charge, Q = I × t

In electrolysis, Q = n × F

Where n is the number of moles of electrons.

F is the Faraday constant which has a value of 9.65 × 10⁴ C/mol

From this, we get:

t = n × F / I

Charge on 1 mole of electrons = 1 Faraday

Charge on 1 mole of electrons = 9.65 × 10⁴ C/mol

Charge on 1 electron = 1 Faraday / Nₐ

Charge on 1 electron = 9.65 × 10⁴ C / (6.022 × 10²³) ≈ 1.602 × 10⁻¹⁹ C

Number of moles of electrons, n = m / (Atomic mass of copper × 1 Faraday)

n = 4.10 g / (63.55 g/mol × 9.65 × 10⁴ C/mol)

n = 6.88 × 10⁻⁴ mol

Now, we can find the time taken to deposit copper solid as:

t = n × F / I

t = 6.88 × 10⁻⁴ mol × 9.65 × 10⁴ C/mol / 2.10 A

t ≈ 3.14 h

Therefore, the time needed to deposit 4.10 g of solid copper at the cathode was 3.14 hours.

Learn more about electrolysis :

https://brainly.com/question/12994141

#SPJ11

Question 14 of 25
Jim builds a robot that travels no more than 8 feet per minute. Graph the inequality showing the relationship
between the distance traveled and the time elapsed.
Is it possible for the robot to travel 10 feet in 1.5 minutes?

Answers

It is possible for the robot to travel 10 feet in 1.5 minutes based on the given inequality and graph.

To graph the inequality showing the relationship between the distance traveled and the time elapsed, we need to consider the given information that the robot can travel no more than 8 feet per minute. Let's denote the distance traveled as D and the time elapsed as T.

The inequality representing this relationship is: D ≤ 8T

To determine if it is possible for the robot to travel 10 feet in 1.5 minutes, we substitute the values into the inequality:

10 ≤ 8(1.5)

Simplifying the equation, we have:

10 ≤ 12

This statement is true. Therefore, it is possible for the robot to travel 10 feet in 1.5 minutes because the distance traveled (10 feet) is less than or equal to 8 times the time elapsed (8 * 1.5 = 12).

Graphically, if we plot the distance traveled (D) on the y-axis and the time elapsed (T) on the x-axis, we would have a horizontal line at D = 10 (representing the 10 feet traveled) and a diagonal line with a slope of 8 (representing the maximum speed of 8 feet per minute). The line representing the distance traveled would be below or touching the line representing the speed, indicating that the condition is satisfied.

Therefore, it is possible for the robot to travel 10 feet in 1.5 minutes based on the given inequality and graph.

for such more question on inequality

https://brainly.com/question/17448505

#SPJ8

Find a) any critical values and b) any relative extrema.
1(x)=x+6x+8

Answers

a) The critical value of the function is x = -3.
b) The function has a relative minimum at x = -3.

To find the critical values and relative extrema of the function 1(x) = x^2 + 6x + 8, we need to find the derivative of the function and then solve for where the derivative equals zero.


First, let's find the derivative of the function:
1'(x) = 2x + 6
Now, let's set the derivative equal to zero and solve for x:
2x + 6 = 0
2x = -6
x = -3

The critical value of the function is x = -3.

To determine the relative extrema, we need to analyze the behavior of the function around the critical value.
To the left of x = -3, let's choose x = -4:
1(-4) = (-4)^2 + 6(-4) + 8
1(-4) = 16 - 24 + 8
1(-4) = 0
To the right of x = -3, let's choose x = -2:
1(-2) = (-2)^2 + 6(-2) + 8
1(-2) = 4 - 12 + 8
1(-2) = 0

As both values are 0, we can conclude that the function has a relative minimum at x = -3.

Learn more about critical value:

brainly.com/question/15970126

#SPJ11

Type or paste question here
Q. No. 1 The specific discharge 'q' of water in an open channel is assumed to be a function of the depth of flow in the channel y' the height of the roughness of the channel surface 'e the acceleratio

Answers

The flowrate 'g' will change when the channel roughness 'e' doubled.[tex]q_0 = \sqrt{2}q_1[/tex]

The specific discharge 'q' of water in an open channel is assumed to be a function of the depth of flow in the channel y' the height of the roughness of the channel surface 'e' the acceleration due to gravity 'g' and the slope 's' of the area where the channel is placed.

Make use of dimensional analysis to determine how the flowrate 'g' will change when the channel roughness 'e' doubled.

 q = [M⁰ L¹ T⁰]

y = [M⁰ L¹ T⁰]

e = [M⁰ L¹ T⁰]

g = [M⁰ L T⁻²]

s₀= [M⁰ L⁰ T⁰]

s₀ = q[y]ᵃ [c]ᵇ [g]ⁿ

[M⁰ L⁰ T⁰] = [M⁰ L¹ T⁻¹] [L]ᵃ [L]ᵇ [LT⁻²]ⁿ

0 = 1 + a + b + n

0 = -2 -2c

c = -1/2

a + b = -1 + 1/2 = -1/2
Let a = 0, b = -1/2

s₀ = q[e]^-1/2 [g]^-1/2

[tex]s_0 = \frac{q}{e^{1/2}*g^{1/2}}[/tex]

[tex]q_0 = \sqrt{2}q_1[/tex]

Learn more about dimensional analysis here:

https://brainly.com/question/17620509

#SPJ4

Complete Question:

Q. No. 1 The specific discharge 'q' of water in an open channel is assumed to be a function of the depth of flow in the channel y' the height of the roughness of the channel surface 'e the acceleration due to gravity 'g' and the slope 's' of the area where the channel is placed. Make use of dimensional analysis to determine how the flowrate 'g' will change when the channel roughness 'e' doubled.

 

Other Questions
Lewin found that autocratic leaders produced groups that were utocrat O consistently high in productivity. O low in hostility and aggression. O highly independent. O low on creativity and originality. write a product of 2 functions with one x intercept. The two functions multiplied must be from two different categories (eg. a trig & a rational). Find the x and y intercepts of that function, justify your answer with calculations and show algebraic steps. A and B together can do a job in 12 days and B and C together can do the same job in 16 days. How long would it take them all working together to do the job if A does one and a half time as much as C? According to the text, the smoking of nicotine (cigarettes), is linked to what percent of death with the U.S.? 090 070 OSS. 065 Drugs in American have always been an issue. Until todays date, local governments cannot combat this issue. Based on our class lectures, what is the amount of juveniles who are primarily using marijuana in the nation? 400,000 O800,000 17 million 22 million Which of the following is NOT one of the side effects associated with the intake of cocaine? O Excitation Insomnia O Depression Increase of blood pressure In the short-run, a price ceiling on gasoline will create a ______ ______ than in the long run.Selected answer will be automatically saved. For keyboard navigation, press up/down arrow keys to select an answer.agreater shortagebgreater surplusclesser shortagedlesser surplus A 4 F capacitor is initially charged to 300 V. It is discharged through a 100 mH inductance and a resistor in series: (a) find the frequency of the discharge if the resistance is zero. (b) how many cycles at the above frequency will occur before the discharge oscillation decays to 1/10 of its initialy value if the resistance is 1 ohm. (c) find the value of the resistance which would just prevent oscillations. .rtf is an example of a(n) _ A) archive file B) encrypted file OC) library file OD) text file Help with write a program in C# console app. That readsa text file and displays the number of words.Thanks! Two blocks A and B have a weight of 11lb and 6lb, respectively. They are resting on the incline for which the coefficients of static friction are A=0.15 and B=0.24. Determine the incline angle for which both blocks begin to slide. Also find the required stretch or compression in the connecting spring for this to occur. The spring has a stiffness of k=2.0 lb/ft. (Figure 1) - Part B Express your answer to three significant figures and include the appropriate units How does the FBI use Body Disposal Pathways to understand the criminal psychology of serial killers? He stays Karol Bagh fill with preposition 2. For the sequents below, show which ones are valid and which ones aren't: (a) p q q p(b) p v q (p A q)(c) p, p v q q(d) p v q, q v r p v r(e) p (q v r), q, r p without using the MT rule(f) p A q (p v q)(g) p A p (r q) A (r q)(h) p q, s t p v s q A t(i) (p v q) p How did Hitler and Stalin maintain everyday control of their citizens? The solid rod shown below has a diameter of 25 mm. Calculate the stresses that act at points A and B due to the loadings shown. A=?MPa total normal stress at A 0/2 points A= ? MPa total shear stress at A 14.0/2 points B=?MPa total normal stress at B 15: 0/2 points B=?MPa Refer to the figure. (a) Calculate P 3(in W). W (b) Find the total power (in W) supplied by the source. W An electrostatic field measurement yielded the following results: for TSR =c(3r+4R) 7R =c for rR 3 where 1 = x + yj +zk and c is a constant with appropriate units. (a) Find the charge density p everywhere in space. (10 pts) (b) Find the total charge enclosed by a sphere of arbitrary radius r and with its center at the origin of the coordinate system. (10 pts) (c) Find the electrostatic potential everywhere in space. (10 pts) A Carnot engine whose hot-reservoir temperature is 400 CC has a thermal efficiency of 38 %%.By how many degrees should the temperature of the cold reservoir be decreased to raise the engine's efficiency to 63 %%?Express your answer to two significant figures and include the appropriate units. 3. What is the difference in the payoff diagrams for the call and put spreads? Why is there a difference? (10 points) True or False: f(n) + (f(n)) = (f(n)). Please prove ordisprove (find an example or counterexample). When an air mass passes across a mountain range, many things happen to it. Describe each aspect of a mountain crossing by a moist air mass. What is the pattern of precipitation that results? A diagram may be helpful