a suspension scaffold that uses a two point swing stage anchorage is preferably accessed from?

Answer:

Approximately [tex]7.41 \times 10^{3}\; {\rm m}[/tex].

Explanation:

If initial velocity, final velocity, and time taken are all found, then the change in height (displacement) can be found as:

[tex]\begin{aligned}(\text{displacement}) &= \frac{(\text{average velocity})}{(\text{time taken})} \\ &= \frac{(1/2)[(\text{initial velocity}) + (\text{final velocity})]}{(\text{time taken})}\end{aligned}[/tex].

For example, during the [tex]t = 6.00\; {\rm s}[/tex] of constant acceleration at [tex]a = 58.8\; {\rm m\cdot s^{-2}}[/tex], initial velocity was [tex]u = 0\; {\rm m\cdot s^{-1}}[/tex] and final velocity would be:

[tex]\begin{aligned}v &= (\text{initial velocity}) + (\text{acceleration}) \, (\text{time}) \\ &= (0\; {\rm m\cdot s^{-1}}) + (58.8\; {\rm m\cdot s^{-2}})\, (6.00\; {\rm s}) \\ &= 352.8\; {\rm m\cdot s^{-1}}\end{aligned}[/tex].

Displacement during this period of time would be:

[tex]\begin{aligned}(\text{displacement}) &= \frac{(\text{average velocity})}{(\text{time taken})} \\ &= \frac{(1/2)[(\text{initial velocity}) + (\text{final velocity})]}{(\text{time taken})} \\ &= \frac{(1/2)\, (0\; {\rm m\cdot s^{-1}} + 352.8\; {\rm m\cdot s^{-1}})}{(6.00\; {\rm m\cdot s^{-1}})} \\ &\approx 1.058\times 10^{3}\; {\rm m}\end{aligned}[/tex].

During the next part of the flight, initial velocity was [tex]352.8\; {\rm m\cdot s^{-1}}[/tex] (from the first part of flight) and final velocity would be [tex]0\; {\rm m\cdot s^{-1}}[/tex] when the rocket reaches maximum height. Acceleration was given to be [tex]a = (-9.80\; {\rm m\cdot s^{-2}})[/tex](negative since the rocket is accelerating downward,) but time is not known. Apply the following equation to find the change in height (displacement):

[tex]\begin{aligned}(\text{displacement}) &= \frac{[(\text{final velocity})^{2} - (\text{initial velocity})^{2}]}{2\, (\text{acceleration})} \\ &\approx \frac{(0\; {\rm m\cdot s^{-1}})^{2} - (352.8\; {\rm m\cdot s^{-1}})^{2}}{2\, (-9.80\; {\rm m\cdot s^{-2}})} \\ &\approx 6.350\times 10^{3}\; {\rm m}\end{aligned}[/tex].

The total change in height would be approximately [tex](1.058\times 10^{3}\; {\rm m}) + (6.350\times 10^{3}\; {\rm m}) \approx 7.41\times 10^{3}\; {\rm m}[/tex].

Answer:

The differential equation gives the angular velocity as sqrt(k/m) where m = mass of the object = 125/9.8 = 12.755.     Where k = spring constant, pi = 3.14

We are told that the period is 3.56 seconds. But angular velocity = (2*pi)/P     where p (period) = 3.56 seconds.

Equating the two angular velocity expressions gives (2*pi)/3.56 = sqrt(k/12.755)

Solving for k, we get k = 39.73.

Explanation:

The magnification produced by the lens of a 0.5 mm gem is 10mm.

The magnification of a lens is calculated in terms of the ratio of image height to object height. It is also expressed as a ration of image distance and object distance.

Magnification of lens = image height / object height  = image distance / object distance.

M = [tex]h^{'[/tex]/ h = v/u

Magnification of concave lens is negative and of convex lens is positive.

In the given question,

M = 20

h = 0.5 mm

We have to find size of image, [tex]h^{'[/tex] = ?

using magnification formula

m = h'/h

20 = h'/0.5

h' = 20× 0.5 =10 mm

To know more about magnification here

brainly.com/question/21370207

#SPJ4

The area is 4 times 1.496 times 10 to 11 meters squared, and when we divide this by the total amount of neutrinos created during the proton-proton cycle each second, we obtain 6 times 10 to 14 neutrinos per square meter every second on Earth.

Neutrinos carry away around 3% of the energy produced by nuclear fusion in the Sun. Scientists estimate about 35 million billion (3.5 1016) solar neutrinos pass through each square meter of the Earth's surface per second as a result of protons reacting and creating neutrinos inside the Sun's core.

Your thumbnail receives about 100 billion solar neutrinos each second. Nuclear fusion occurs in the sun, where it results in the creation of neutrinos.

To know more about neutrinos visit:-
https://brainly.com/question/27870530

#SPJ4

The four types of reinforcement include- positive reinforcement, negative reinforcement, punishment, extinction.

Positive reinforcement: Positive reinforcement is especially effective at establishing new behaviors, but it may not work as well in the long term if the subject becomes bored with the reward over time.  This involves adding something to increase response, such as praising a child when they complete a designated task.

Negative reinforcement: Namely, negative in this theory means removing or subtracting something that either discourages negative behavior (punishment) or removes adverse stimuli to support or encourage certain behavior (reinforcement).  This involves removing something to increase response, such as withholding payment until the person completes the job. The person would remain motivated till the end of the job to acquire the payment.

Punishment:  Punishment is often mistakenly confused with negative reinforcement. Remember, reinforcement always increases the chances that a behavior will occur and punishment always decreases the chances that a behavior will occur. This involves adding something aversive to modify behavior. For example, yelling at a child for misbehaving. In this example, the child would associate every negative behavior with punishments. This would prevent the child from repeating such behavior.

Extinction: This involves removing or taking away something to modify a certain response. This is called negative punishment or extinction. For instance, a teenager comes home late, and the parents curb their phone usage. Next time, the teenager would think before breaking the curfew.

For more read about reinforcement see,

https://brainly.com/question/3262992

Wavelength is basically the distance between two successive crests or troughs in a wave.

What are Crests?

Crests are points on a wave where the amplitude is at a maximum. In physics, they are used to describe the shape of a wave, and the amplitude of the wave is measured from the crest to the trough.

Wavelength is typically measured in meters (m) or nanometers (nm). Wavelength is an important parameter in wave mechanics and is related to the frequency of the wave and its speed. Wavelength is inversely proportional to frequency, meaning that as frequency increases, wavelength decreases.

To know more about wavelength,

https://brainly.com/question/10750459

#SPJ4

To develop this problem it is necessary to apply the concepts related to the conservation of Energy. In this case the definition concerning kinetic energy from the simple harmonic movement.

Where,

KE = PE8 + Wf

KE = 1/2KA² + Wf

KE = Kinetic Energy

PE8 = Potential Harmonic Simple Energy

Wf =  Work made by friction.

Our values are given as,

m = 10Kg ⇒ mass

k = 1400N/m ⇒ Spring constant

A = 0.1m ⇒Amplitude

f = 30N Frictional Force

Replacing we have,

KE = 1/2 ka² +Wf

KE = 1/2(1400)×(0.8)²+(-30×0.8)

KE = 4245

Therefore the Kinetic Energy of the block as it passes through its equlibrium position is 4245J.

To learn more about horizontal force please click on below link

https://brainly.com/question/2037071

#SPJ4

During the entire throw, the ball accelerates at the same rate (9.8 m/s2 toward the earth). The ball is moving upward and stays in that direction.

While it is in the air, does its acceleration rise, fall, or remain constant?

Throughout the entire time the penny is in the air, the acceleration is constant. (If there is no wind and air resistance is disregarded, the acceleration is caused by gravity, which is always constant.)

What happens to the ball's speed now—does it rise or fall?

During its downward trajectory, the ball's speed will progressively grow. Experts' step-by-step guidance will help you eliminate doubt and get good exam results.

For more information about Gravity

Visit:

https://brainly.com/question/14874038

#SPJ4

The formula of photoelectric effect is E = hf = Φ + ½ mv²m

Electrons (i.e., electrically charged particles) are quickly emitted by the surface of photoelectric materials when electromagnetic radiation of a specific frequency (i.e., above Threshold Frequency) falls on it. This phenomenon is known as the photoelectric effect.

The photoelectric effect is a phenomena whereby electrons can be released from the surface of a metal when light shines on it. The electrons that are released from the metal are known as photoelectrons, and this process is also sometimes referred to as photoemission.

E = hf = Φ + ½ mv²max

h = Planck's constant (J s)

f = the frequency of the incident radiation (Hz)

Φ = the work function of the material (J)

½ mv2max = Ek(max) = the maximum kinetic energy of the photoelectrons (J)

To learn more about photoelectric effect from given link

https://brainly.com/question/1359033

#SPJ4

The volume of the liquid is 20.26ml.

Volume is a measurement of three-dimensional space that is occupied. Numerous imperial or US customary units, as well as SI-derived units (such the cubic metre and liter), are frequently used to quantify it numerically (such as the gallon, quart, cubic inch).

We are given that,

Mass = m = 19.6g

Density = d = 0.967 g/ml

To calculate the volume of the liquid can be given as,

density = mass/volume

V = m/d

V = (19.6g)/(0.967g/ml)

V = 20.26ml

Therefore , the volume of the liquid is 20.26ml.

To know more about volume

https://brainly.com/question/10794343

#SPJ4

The person generated approximately 16.7 W of power while lifting the bag of groceries. To the nearest tenth of a watt, this would be 16.7 W.

To calculate the power generated by the person lifting the bag of groceries, you can use the equation:

Power = Work / Time

where Power is the power generated, Work is the work done, and Time is the time over which the work was done.

In this case, the work done is equal to the force applied (57 N) multiplied by the distance over which the force was applied (1.75 m), or 57 N * 1.75 m = 100.25 J. The time over which the work was done is 6.0 seconds.

Plugging these values into the equation above, we get:

Power = 100.25 J / 6.0 s

This simplifies to:

Power = 16.7 W

To know more about energy

https://brainly.com/question/1932868

#SPJ4

The cord has a one percent tension. When something or someone pulls on a cord or string, the tension that results is what is being described.

We are aware that T = mg + ma is the formula used to compute the force of tension.

T = mg + ma

T = 800 × 9.8 + 800 ×9.8

Tension is the force that is sent through a rope, string, or wire when two opposing forces pull on it. Along the whole length of the wire, the tension force pulls energy equally on the bodies at the ends. Every physical object that comes into contact with another one exerts force on it.

To know more about tension visit:-

https://brainly.com/question/11348644

#SPJ4

To find the length of the wave if its speed is 54 km/h, we can use the formula:

Wavelength = Speed / Frequency

where the frequency of the wave is equal to the inverse of the oscillation period. The oscillation period of the wave is 0.5 minutes, so the frequency is 1 / (0.5 minutes) = 2 oscillations/minute.

We can now plug these values into the formula to find the wavelength:

Wavelength = 54 km/h / (2 oscillations/minute)

= 27 km

Therefore, the length of the wave is 27 km

To learn more about wave oscillation,

https://brainly.com/question/3092161

https://brainly.com/question/22191853

25 % This table shows that the amount of reactant remaining following n first-order reaction half-lives is (1/2)n times the initial concentration.

As a result, 50% of the original parent nuclei are still present after one half-life, 25% after two half-lives, etc. The half-life and the initial quantity of radioactive atoms present both affect how much radiation is produced by a radioactive source.

Therefore, after two half-lives, the parent-to-daughter atom ratio is 1:3. (one-quarter to three-quarters). The original parent is reduced to an eighth, a sixteenth, a thirty-second, and so on via successive half-lives.

To know more about Half life visit:-

https://brainly.com/question/1439925

#SPJ4

The speaker of the poem is an unnamed person who lives in a clearly rural place and who questions the notion of keeping up a wall that keeps breaking down every year.

What is a poem?

Poetry (derived from the Greek poiesis, "to create"), also called poetry, uses the aesthetic and often rhythmic qualities of language (phonetic aesthetics, tonal symbolism, time signatures, etc.) to express "or" instead of one plain and obvious meaning. A poem is a literary work written by a poet according to this principle.

Poetry has a long and tumultuous history and has undergone different developments around the world. It goes back at least to prehistoric African hunting poetry and court poetry of praise and lamentation of the kingdoms of the Nile, Niger and the Volta Valley.

The speaker of the poem is an unnamed person who lives in a clearly rural place and who questions the notion of keeping up a wall that keeps breaking down every year.

To know more about Poem, visit:

https://brainly.com/question/9861

#SPJ4

The resultant force that is acting on the diver is 80N.

We know that the idea of the resultant force is that it is the kind of force that is the result of the action more than one force acting on an object. As such, the resultant force is the effective force that acts on an object that under the action of a given system of forces.

Now we can see that there is an upward and a downward force that is acting on the diver as we can see and the forces are in opposite direction thus the resultant of the forces can be obtained by subtraction. The resultant force is obtained as; 680 N - 600 N= 80N

Learn more about resultant force:https://brainly.com/question/16380983

#SPJ1

Explanation of the Current Job Market: Numerous studies have demonstrated considerable favourable Additional: Organizational commitment is strongly positively correlated with job satisfaction.

People who are more satisfied with their jobs The value of the collection of employee actions that either positively or negatively influence the achievement of company goals is referred to as With the exception of an employee's age and length of service, all of the following have been proven to be positively connected with organisational commitment. Examples of employment enrichment include diversifying skill sets, giving roles more responsibilities, giving work a deeper purpose, fostering autonomy, and providing feedback. Adding more of the same obligations associated to the same position satisfaction won't achieve the purpose of exposing the person to tasks typically allocated for higher positions or those with more specialised duties

To learn more about satisfaction please click on below link

https://brainly.com/question/7873593

#SPJ4

Jerry launches his rock upward at a speed of 20 m/s. It will slow down until its velocity hits zero at a rate of 9.8 m/s2. At that point, it will have reached apogee and will start to plummet. Therefore, 20 m/(9.8 m/s) = 2.04 seconds. to your maximum height.

After 2.04 seconds, it will start to accelerate downward once more, this time by 9.8 m/s2. Therefore, it will arrive at the starting place after an additional 2.04 seconds while moving at 20 m/s. Then it will travel through time in a similar manner to Heather's rock.

Jerry's pebble will therefore impact the sea 4.08 seconds later than Heather's. For this issue, it is not important to know how high you are above the sea.

To know more about velocity visit:-

https://brainly.com/question/2501848

#SPJ4

If the mass of the bar is 50kg, and Shelbi exerts 550N of force, the acceleration of the bar is 11 N/m².

A push, pull, or hit on any object that causes a change in its state of motion is referred to as applying force. One thing experiences a force from another. For instance, we can say that when a force was applied to the box in the form of a push, it changed its state from rest to motion because when a box is pushed, it goes forward and changes its state of motion.

Accelerations are vector quantities. According to Newton's Second Law, an object's acceleration is the result of two factors working together: the object's mass, which varies depending on the materials it is made of, and the net balance of all external forces acting on it.

Acceleration= Force/Mass =550/50 = 11m/s²

To learn more about acceleration visit:

brainly.com/question/2303856

#SPJ1

Due to the fact that the reporting company purchases waste management services, treatment of waste produced during operations is designated as an originating scope 3 category.

Scope 3 emission are the outcome of operations on resources that the reporting company does not own or control, but which are indirectly impacted by the organization through its value chain.All sources outside of an organization's range 1 and scope 2 boundary are included in scope 3 emissions.

Scope 3 emissions were indirect emission of greenhouse gases that are produced in the larger economy in addition to scope 2 emissions.They result from a facility's operations but come from sources not under the ownership or control of that facility.

To know more about Scope 3 visit:

https://brainly.com/question/29546969

#SPJ4

2 bonds mean Double bond or the order of bond =2.

A double bond as the name suggests double, is usually formed when two atoms share two sets of electrons with each other.

As electrons are usually shared in pairs.

A covalent bond is a shared pair of electrons. A double bond between two atoms requires more energy to break than a single bond because four electrons are shared by the two atoms in the double bond.

Two electron pairs make up a double bond (bond order = 2), whereas three electron pairs are shared by a triple bond (bond order = 3). Bond order can be a fractional number.

For more questions on Double bond:

https://brainly.com/question/22559483

#SPJ4

The highest to which the first projectile rises will be equal to 51.25 m and the second projectile is 76.29 m.

A projectile can be defined as an object that will be thrown obliquely near the surface, it follows along a curved path with constant acceleration.

In a Projectile Motion, along the y-axis, there is a constant acceleration, responsible for the vertical motion of the particle while along the x-axis plotted is uniform velocity, responsible for the horizontal motion.

The maximum height of the first projectile is given by:

[tex]\displaystyle Y_1 = \frac{u^2sin^2\theta}{2g}[/tex]

The maximum height of the second projectile is given by:

[tex]\displaystyle Y_2 = \frac{u^2sin^2(90-\theta)}{2g}[/tex]

[tex]\displaystyle Y_2 = \frac{u^2cos^2\theta}{2g}[/tex]

[tex]\displaystyle Y_2 -Y_1 = \frac{u^2(cos^2-sin^2\theta)}{2g}[/tex]

[tex]\displaystyle Y_2 -Y_1= \frac{u^2cos2\theta}{2g}[/tex]

Given, height difference  Y₂ - Y₁ = 25 m, initial velocity, u = 50m/s

[tex]\displaystyle 25 = \frac{(50)^2cos2\theta}{2\times 9.8}[/tex]

cos 2θ = 0.196

θ = 39.34°

[tex]\displaystyle Y_1 = \frac{(50)^2sin^2 (39.34)}{2\times 9.8}[/tex]

Y₁ = 51.25 m

[tex]\displaystyle Y_2 = \frac{(50)^2sin^2 (50.66)}{2\times 9.8}[/tex]

Y₂ = 76.29 m

Learn more about projectile motion, here:

brainly.com/question/11049671

#SPJ1

Alternate Approach The inductor exhibits open circuit behavior at time t=0+. At t=0+, inductive reactance is infinite, causing the inductor to initially operate as an open circuit. The inductor similarly acts like a short circuit at steady state.

The inductor behaves as an open circuit with current reflected back at time t = 0 +. Important Information: A capacitor with a zero starting condition behaves as a short circuit at time t = 0 +, reflecting back voltage.

At time t = 0, an inductor is coupled to a charged capacitor. Considering the capacitor and the inductor as one, Write out the equation for the effective potential difference across the combination at any instant in time t, and then solve it to find the instantaneous current through the combination.

To know more about electric field visit:-

https://brainly.com/question/15800304

#SPJ4

The five pillars of safety are engineering, encouragement, enforcement, and evaluation. Your strategy to ensure that you promote a safe environment and workplace should heavily emphasize education.

By exercising your intellect beforehand, you may be able to save a life or at least lessen someone else's suffering. The three fundamental Cs are check, call, and care.

A Framework for Aligning the 14 Process Safety Management Elements. To prevent the release of extremely hazardous substances, it is essential to use related techniques to managing hazards, although it might be difficult to put Process Safety Management's operational goals into effect.

To know more about elements of safety visit:-

https://brainly.com/question/29793033

#SPJ4

The total kinetic energy of the system after the collision will be 4.5 ×10^2 Joules

Option (B) is the correct choice.

An elastic collision is one in which the system does not experience a net loss of kinetic energy as a result of the collision.

In elastic collisions, momentum and kinetic energy are both preserved.

Imagine two trolleys that resemble one another moving in the same direction at the same pace. They clash, maintaining their speed as they bounce off one another. The fact that no energy has been wasted makes this collision fully elastic.

Therefore, to calculate the kinetic energy of the system after the collision

We will use the formula 1/2 mv²

Mass = 25 kg

Velocity = 5.98 m/s

So, the value of KE = 1/2 × 25 × 5.98 ² = 447 Joules = 4.5 ×10^2 Joules (Approximately)

For more questions on Collision:

https://brainly.com/question/1808045

#SPJ4

The energy element in the definition of motivation is considered a measure of intensity, drive, and vigor.

Motivation is the process by which a person puts in energized, directed, and sustained effort to attain a defined goal. The energy element is taken as the measure of intensity or drive.

The term "motivation" describes the reason behind action. It is the driving force guiding human actions. Motivation is the process of initiating, guiding, and maintaining goal-oriented behaviors of a person or an organization.

There are three major components that drive motivation: activation, persistence, and intensity.

Energy element measures intensity or drive.

Direction is when the effort is directed toward and consistent with organizational goals.

Persistence is putting continue and sustained effort to achieve goals.

To know more about motivation here

brainly.com/question/951988

#SPJ4

The total mechanical energy of the baseball is found to be 473.5 J

The total mechanical energy of the ball will be given by the sum of the total potential energy and the total kinetic energy of the ball which will be given by the relation,

ME = KE + PE

ME = 1/2Mv²+Mgh

Where,

M is the mass of the ball V is the velocity of the ball h is the height of the baseball.

It is given to us that the baseball player has thrown the baseball towards another player when the ball is reach the height of 15m it attend us velocity of 40m/s and the mass of the ball is given to be 0.5 kg.

Now, putting all the values in order to find the mechanical energy of the ball,

ME = 1/2(0.5)(40)²+0.5(9.8)(15)

ME = 473.5 J.

The total mechanical energy of the baseball is 473.5 J.

To know more about mechanical energy, visit,

https://brainly.com/question/24443465

#SPJ4

a) The tension in the stick when the ball is at twelve o'clock is 6N.

b) And at the six o'clock position is also 16N.

To determine the tension in the stick when the ball is at the three o'clock, twelve o'clock, and six o'clock positions, we can use the equation:

T = m × v² / r

where T is the tension in the stick, m is the mass of the ball, v is the speed of the ball, and r is the radius of the circle.

In this case, the mass of the ball is 0.22 kg, the speed of the ball is constant, and the radius of the circle is the same at all positions. Therefore, the tension in the stick will be the same at all positions.

Plugging the values for the mass and radius of the circle into the equation gives us the following:

T = 0.22 kg × v² / r = 16 N

Therefore, the tension in the stick when the ball is at the three o'clock, twelve o'clock, and six o'clock positions is 16 N.

Learn more about tension at

https://brainly.com/question/29348039?referrer=searchResults

#SPJ4

The format specifier %f is used to output values of type float or double.

Format specifiers are used in C to accept inputs and print out the output of a type. The sign% is present in every format specifier we use. The type of data that must be submitted as input and the type of data that must be displayed on the screen are both specified by format specifiers to the compiler.

Both the input and the output use the format specifier. When a variable is taking input with scanf() or printing data with printf, there is a technique to let the compiler know what type of data is there in the variable (). Examples are %c, %d, and %f.

Format specifiers in C typically come in six different flavors.

To know more about format specifier

https://brainly.com/question/4252154

#SPJ4